Amplified stretch of bottlebrush-coated DNA in nanofluidic channels

Gradient Nanoconfinement Facilitates Binding of Transcriptional Factor NF-κB to Histone- and Protamine-DNA Complexes

Mechanically induced chromosome reorganization plays important roles in transcriptional regulation. However, the interplay between chromosome reorganization and transcription activities is complicated, such that it is difficult to decipher the regulatory effects of intranuclear geometrical cues. Here, we simplify the system by introducing DNA, packaging proteins (i.e., histone and protamine), and transcription factor NF-κB into a well-defined fluidic chip with changing spatical confinement ranging from 100 to 500 nm. It is uncovered that strong nanoconfinement suppresses higher-order folding of histone- and protamine-DNA complexes, the fracture of which exposes buried DNA segments and causes increased quantities of NF-κB binding to the DNA chain. Overall, these results reveal a pathway of how intranuclear geometrical cues alter the open/closed state of a DNA-protein complex and therefore affect transcription activities: i.e., NF-κB binding.

C-terminal truncation of α-synuclein alters DNA structure from extension to compaction

Parkinson's disease (PD) is linked to aggregation of the protein α-synuclein (aS) into amyloid fibers. aS is proposed to regulate synaptic activity and may also play a role in gene regulation via interaction with DNA in the cell nucleus. Here, we address the role of the negatively-charged C-terminus in the interaction between aS and DNA using single-molecule techniques. Using nanofluidic channels, we demonstrate that truncation of the C-terminus of aS induces differential effects on DNA depending on the extent of the truncation. The DNA extension increases for full-length aS and the (1-119)aS variant, but decreases about 25% upon binding to the (1-97)aS variant. Atomic force microscopy imaging showed full protein coverage of the DNA at high aS concentration. The characterization of biophysical properties of DNA when in complex with aS variants may provide important insights into the role of such interactions in PD, especially since C-terminal aS truncations have been found in clinical samples from PD patients.

Strategies to Build Hybrid Protein-DNA Nanostructures

Proteins and DNA exhibit key physical chemical properties that make them advantageous for building nanostructures with outstanding features. Both DNA and protein nanotechnology have growth notably and proved to be fertile disciplines. The combination of both types of nanotechnologies is helpful to overcome the individual weaknesses and limitations of each one, paving the way for the continuing diversification of structural nanotechnologies. Recent studies have implemented a synergistic combination of both biomolecules to assemble unique and sophisticate protein-DNA nanostructures. These hybrid nanostructures are highly programmable and display remarkable features that create new opportunities to build on the nanoscale. This review focuses on the strategies deployed to create hybrid protein-DNA nanostructures. Here, we discuss strategies such as polymerization, spatial directing and organizing, coating, and rigidizing or folding DNA into particular shapes or moving parts. The enrichment of structural DNA nanotechnology by incorporating protein nanotechnology has been clearly demonstrated and still shows a large potential to create useful and advanced materials with cell-like properties or dynamic systems. It can be expected that structural protein-DNA nanotechnology will open new avenues in the fabrication of nanoassemblies with unique functional applications and enrich the toolbox of bionanotechnology.

Rod-shaped polypeptide nanoparticles for siRNA delivery

Rod-shaped nanoparticles have been reported to exhibit improved cellular uptake, intracellular processing and transport through tissues and organs, as compared to spherical nanoparticles. We use C-S-B triblock polypeptides composed of a collagen-like block (C), a silk-like block (S) and an oligolysine domain (B) for one-dimensional co-assembly with siRNA into rod-shaped nanoparticles. Here we investigate these siRNA encapsulating rod-shaped nanoparticles as a gene delivery system. Uptake experiments for C-S-B and C-S-B/siPlk1 particles indicate that these rod-shaped nanoparticles can efficiently deliver siPlk1 into HeLa cells. Moreover, C-S-B/siPlk1 complexes display significant mPlk1 gene knockdown in a dose-dependent manner, causing apoptosis as intended. The lower effectiveness of C-S-B/siPlk1 in inducing cell death as compared to cationic lipid-based formulations is explained by the high lysosome-C-S-B/siPlk1 co-localization ratio, which will need to be addressed in a future redesign of polypeptide sequence. Overall, the non-toxic and unique rod-shaped C-S-B nanoparticles deserve further optimization as a new siRNA delivery system for cancer therapy.

Protein-coated dsDNA nanostars with high structural rigidity and high enzymatic and thermal stability

DNA nanotechnology creates precise shape-specific nanostructures through the self-assembly of short ssDNA oligonucleotides. One such shape, which has relevant biomedical applications due to its multivalency, is the star. However, building star-like nanostructures with a large size (>100 nm) using ssDNA is complex and challenging. This study presents a novel strategy to prepare stiff and large dsDNA nanostars by assembling duplex DNA fragments into star-shapes that are subsequently coated with a virus-inspired protein. The protein binds dsDNA and overcomes the high structural flexibility of naked dsDNA. The nanostar-like dsDNA templates with up to six arms were prepared by self-assembly of PCR-produced dsDNA fragments (211 to 722 bp) with a central DNA junction. Through gel electrophoresis and Atomic Force Microscopy it is demonstrated that single dsDNA nanostars are self-assembled and coated with the protein, and this has a large stiffening effect on the nanostar. Furthermore, the coating significantly enhances stability at high temperatures and protects nanostars against nuclease degradation for at least 10 hours. This study shows that DNA-binding proteins can be harnessed as structural "rigidifiers" of flexible branched dsDNA templates. This strategy opens a way to prepare structurally defined hybrid protein-dsDNA nanostructures that could be exploited as building blocks for novel DNA nanomaterials.

Production of protein-based polymers in Pichia pastoris

Materials science and genetic engineering have joined forces over the last three decades in the development of so-called protein-based polymers. These are proteins, typically with repetitive amino acid sequences, that have such physical properties that they can be used as functional materials. Well-known natural examples are collagen, silk, and elastin, but also artificial sequences have been devised. These proteins can be produced in a suitable host via recombinant DNA technology, and it is this inherent control over monomer sequence and molecular size that renders this class of polymers of particular interest to the fields of nanomaterials and biomedical research. Traditionally, Escherichia coli has been the main workhorse for the production of these polymers, but the methylotrophic yeast Pichia pastoris is finding increased use in view of the often high yields and potential bioprocessing benefits. We here provide an overview of protein-based polymers produced in P. pastoris. We summarize their physicochemical properties, briefly note possible applications, and detail their biosynthesis. Some challenges that may be faced when using P. pastoris for polymer production are identified: (i) low yields and poor process control in shake flask cultures; i.e., the need for bioreactors, (ii) proteolytic degradation, and (iii) self-assembly in vivo. Strategies to overcome these challenges are discussed, which we anticipate will be of interest also to readers involved in protein expression in P. pastoris in general.

Annealing of ssDNA and compaction of dsDNA by the HIV-1 nucleocapsid and Gag proteins visualized using nanofluidic channels

The nucleocapsid protein NC is a crucial component in the human immunodeficiency virus type 1 life cycle. It functions both in its processed mature form and as part of the polyprotein Gag that plays a key role in the formation of new viruses. NC can protect nucleic acids (NAs) from degradation by compacting them to a dense coil. Moreover, through its NA chaperone activity, NC can also promote the most stable conformation of NAs. Here, we explore the balance between these activities for NC and Gag by confining DNA–protein complexes in nanochannels. The chaperone activity is visualized as concatemerization and circularization of long DNA via annealing of short single-stranded DNA overhangs. The first ten amino acids of NC are important for the chaperone activity that is almost completely absent for Gag. Gag condenses DNA more efficiently than mature NC, suggesting that additional residues of Gag are involved. Importantly, this is the first single DNA molecule study of full-length Gag and we reveal important differences to the truncated Δ-p6 Gag that has been used before. In addition, the study also highlights how nanochannels can be used to study reactions on ends of long single DNA molecules, which is not trivial with competing single DNA molecule techniques.

Linearization and Labeling of Single-Stranded DNA for Optical Sequence Analysis

Genetic profiling would benefit from linearization of ssDNA through the exposure of the unpaired bases to gene-targeting probes. This is compromised by ssDNA's high flexibility and tendency to form self-annealed structures. Here, we demonstrate that self-annealing can be avoided through controlled coating with a cationic-neutral diblock polypeptide copolymer. Coating does not preclude site-specific binding of fluorescence labeled oligonucleotides. Bottlebrush-coated ssDNA can be linearized by confinement inside a nanochannel or molecular combing. A stretch of 0.32 nm per nucleotide is achieved inside a channel with a cross-section of 100 nm and a 2-fold excess of polypeptide with respect to DNA charge. With combing, the complexes are stretched to a similar extent. Atomic force microscopy of dried complexes on silica revealed that the contour and persistence lengths are close to those of dsDNA in the B-form. Labeling is based on hybridization and not limited by restriction enzymes. Enzyme-free labeling offers new opportunities for the detection of specific sequences.

Alpha-Synuclein Modulates the Physical Properties of DNA

Fundamental research on Parkinson's disease (PD) most often focuses on the ability of α-synuclein (aS) to form oligomers and amyloids, and how such species promote brain cell death. However, there are indications that aS also plays a gene-regulatory role in the cell nucleus. Here, the interaction between monomeric aS and DNA in vitro has been investigated with single-molecule techniques. Using a nanofluidic channel system, it was discovered that aS binds to DNA and by studying the DNA-protein complexes at different confinements we determined that aS binding increases the persistence length of DNA from 70 to 90 nm at high coverage. By atomic force microscopy it was revealed that at low protein-to-DNA ratio, the aS binding occurs as small protein clusters scattered along the DNA; at high protein-to-DNA ratio, the DNA is fully covered by protein. As DNA-aS interactions may play roles in PD, it is of importance to characterize biophysical properties of such complexes in detail.

Distribution of label spacings for genome mapping in nanochannels

In genome mapping experiments, long DNA molecules are stretched by confining them to very narrow channels, so that the locations of sequence-specific fluorescent labels along the channel axis provide large-scale genomic information. It is difficult, however, to make the channels narrow enough so that the DNA molecule is fully stretched. In practice, its conformations may form hairpins that change the spacings between internal segments of the DNA molecule, and thus the label locations along the channel axis. Here, we describe a theory for the distribution of label spacings that explains the heavy tails observed in distributions of label spacings in genome mapping experiments.

Evidence for the extended de Gennes regime of a semiflexible polymer in slit confinement

We use off-lattice, pruned-enriched Rosenbluth method (PERM) simulations to compute the confinement free energy of a real wormlike chain of effective width w and persistence length lp in a slit of height H. For slit heights much larger than the persistence length of the polymer and much smaller than the thermal blob size, the excess free energy of the confined chain is consistent with a modified version of the scaling theory for the extended de Gennes regime in a channel that reflects the blob statistics in slit confinement. Explicitly, for channel sizes [Formula: see text], the difference between the confinement free energy of the real chain and that of an ideal chain scales like w/H.

Force and Scale Dependence of the Elasticity of Self-Assembled DNA Bottle Brushes

As a model system to study the elasticity of bottle-brush polymers, we here introduce self-assembled DNA bottle brushes, consisting of a DNA main chain that can be very long and still of precisely defined length, and precisely monodisperse polypeptide side chains that are physically bound to the DNA main chains. Polypeptide side chains have a diblock architecture, where one block is a small archaeal nucleoid protein Sso7d that strongly binds to DNA. The other block is a net neutral, hydrophilic random coil polypeptide with a length of exactly 798 amino acids. Light scattering shows that for saturated brushes the grafting density is one side chain per 5.6 nm of DNA main chain. According to small-angle X-ray scattering, the brush diameter is D = 17 nm. By analyzing configurations of adsorbed DNA bottle brushes using AFM, we find that the effective persistence of the saturated DNA bottle brushes is P_eff = 95 nm, but from force–extension curves of single DNA bottle brushes measured using optical tweezers we find P_eff = 15 nm. The latter is equal to the value expected for DNA coated by the Sso7d binding block alone. The apparent discrepancy between the two measurements is rationalized in terms of the scale dependence of the bottle-brush elasticity using theory previously developed to analyze the scale-dependent electrostatic stiffening of DNA at low ionic strengths.

Engineered Diblock Polypeptides Improve DNA and Gold Solubility during Molecular Assembly

Programmed molecular recognition is being developed for the bionanofabrication of mixed organic/inorganic supramolecular assemblies for applications in electronics, photonics, and medicine. For example, DNA-based nanotechnology seeks to exploit the easily programmed complementary base-pairing of DNA to direct assembly of complex, designed nanostructures. Optimal solution conditions for bionanofabrication, mimicking those of biological systems, may involve high concentrations of biomacromolecules (proteins, nucleic acids, etc.) and significant concentrations of various ions (Mg²⁺, Na⁺, Cl^-, etc.). Given a desire to assemble diverse inorganic components (metallic nanoparticles, quantum dots, carbon nanostructures, etc.), it will be increasingly difficult to find solution conditions simultaneously compatible with all components. Frequently, the use of chemical surfactants is undesirable, leaving a need for the development of alternative strategies. Herein, we discuss the use of artificial, diblock polypeptides in the role of solution compatibilizing agents for molecular assembly. We describe the use of two distinct diblock polypeptides with affinity for DNA in the stabilization of DNA origami and DNA-functionalized gold nanoparticles (spheres and rods) in solution, protection of DNA from enzymatic degradation, as well as two 3D tetrahedral DNA origamis. We present initial data showing that the diblock polypeptides promote the formation in the solution of desired organic/inorganic assemblies.

Precise Coating of a Wide Range of DNA Templates by a Protein Polymer with a DNA Binding Domain

Emerging DNA-based nanotechnologies would benefit from the ability to modulate the properties (e.g., solubility, melting temperature, chemical stability) of diverse DNA templates (single molecules or origami nanostructures) through controlled, self-assembling coatings. We here introduce a DNA coating agent, called C₈-B^Sso7d, which binds to and coats with high specificity and affinity, individual DNA molecules as well as folded origami nanostructures. C₈-B^Sso7d coats and protects without condensing, collapsing or destroying the spatial structure of the underlying DNA template. C₈-B^Sso7d combines the specific nonelectrostatic DNA binding affinity of an archeal-derived DNA binding domain (Sso7d, 7 kDa) with a long hydrophilic random coil polypeptide (C₈, 73 kDa), which provides colloidal stability (solubility) through formation of polymer brushes around the DNA templates. C₈-B^Sso7d is produced recombinantly in yeast and has a precise (but engineerable) amino acid sequence of precise length. Using electrophoresis, AFM, and fluorescence microscopy we demonstrate protein coat formation with stiffening of one-dimensional templates (linear dsDNA, supercoiled dsDNA and circular ssDNA), as well as coat formation without any structural distortion or disruption of two-dimensional DNA origami template. Combining the programmability of DNA with the nonperturbing precise coating capability of the engineered protein C₈-B^Sso7d holds promise for future applications such as the creation of DNA-protein hybrid networks, or the efficient transfection of individual DNA nanostructures into cells.

Exploring DNA–protein interactions on the single DNA molecule level using nanofluidic tools

This review highlights the use of nanofluidic channels for studying DNA–protein interactions on the single DNA molecule level.

Extracting physical chemistry from mechanics: a new approach to investigate DNA interactions with drugs and proteins in single molecule experiments

In this review we focus on the idea of establishing connections between the mechanical properties of DNA–ligand complexes and the physical chemistry of DNA–ligand interactions.

Buried centimeter-long micro- and nanochannel arrays in porous silicon and glass

We developed a simple process to fabricate deeply buried micro- and nanoscale channels in glass and porous silicon from bulk silicon using a combination of ion beam irradiation, electrochemical anodization and high temperature oxidation. The depth, width and length of these structures can be controllably varied and we successfully fabricated an array of centimeter-long buried micro- and nanochannels. This process allows densely packed, arbitrary-shaped channel geometries with micro- to nanoscale dimensions to be produced in a three-dimensional multilevel architecture, providing a route to fabricate complex devices for use in nanofluidics and lab-on-a-chip systems. We demonstrate the integration of these channels with large reservoirs for DNA linearization in high aspect ratio nanochannels.

Modeling the relaxation time of DNA confined in a nanochannel

Using a mapping between a Rouse dumbbell model and fine-grained Monte Carlo simulations, we have computed the relaxation time of λ-DNA in a high ionic strength buffer confined in a nanochannel. The relaxation time thus obtained agrees quantitatively with experimental data [Reisner et al., Phys. Rev. Lett. 94, 196101 (2005)] using only a single O(1) fitting parameter to account for the uncertainty in model parameters. In addition to validating our mapping, this agreement supports our previous estimates of the friction coefficient of DNA confined in a nanochannel [Tree et al., Phys. Rev. Lett. 108, 228105 (2012)], which have been difficult to validate due to the lack of direct experimental data. Furthermore, the model calculation shows that as the channel size passes below approximately 100 nm (or roughly the Kuhn length of DNA) there is a dramatic drop in the relaxation time. Inasmuch as the chain friction rises with decreasing channel size, the reduction in the relaxation time can be solely attributed to the sharp decline in the fluctuations of the chain extension. Practically, the low variance in the observed DNA extension in such small channels has important implications for genome mapping.