Particle deposition in spontaneously hypertensive rats exposed via whole-body inhalation: measured and estimated dose

The effect of inlet flow profile and nozzle diameter on drug delivery to the maxillary sinus

In this paper, the effect of the turbulence and swirling of the inlet flow and the diameter of the nozzle on the flow characteristics and the particles' transport/deposition patterns in a realistic combination of the nasal cavity (NC) and the maxillary sinus (MS) were examined. A computational fluid dynamics (CFD) model was developed in ANSYS® Fluent using a hybrid Reynolds averaged Navier–Stokes–large-eddy simulation algorithm. For the validation of the CFD model, the pressure distribution in the NC was compared with the experimental data available in the literature. An Eulerian–Lagrangian approach was employed for the prediction of the particle trajectories using a discrete phase model. Different inlet flow conditions were investigated, with turbulence intensities of 0.15 and 0.3, and swirl numbers of 0.6 and 0.9 applied to the inlet flow at a flow rate of 7 L/min. Monodispersed particles with a diameter of 5 µm were released into the nostril for various nozzle diameters. The results demonstrate that the nasal valve plays a key role in nasal resistance, which damps the turbulence and swirl intensities of the inlet flow. Moreover, it was found that the effect of turbulence at the inlet of the NC on drug delivery to the MS is negligible. It was also demonstrated that increasing the flow swirl at the inlet and decreasing the nozzle diameter improves the total particle deposition more than threefold due to the generation of the centrifugal force, which acts on the particles in the nostril and vestibule. The results also suggest that the drug delivery efficiency to the MS can be increased by using a swirling flow with a moderate swirl number of 0.6. It was found that decreasing the nozzle diameter can increase drug delivery to the proximity of the ostium in the middle meatus by more than 45%, which subsequently increases the drug delivery to the MS. The results can help engineers design a nebulizer to improve the efficiency of drug delivery to the maxillary sinuses.

Biomedical and biophysical limits to mathematical modeling of pulmonary system mechanics: a scoping review on aerosol and drug delivery

Undoubtedly, the construction of the biomechanical geometry systems with the help of computer tomography (CT) and magnetic resonance imaging (MRI) has made a significant advancement in studying in vitro numerical models as accurately as possible. However, some simplifying assumptions in the computational studies of the respiratory system have caused errors and deviations from the in vivo actual state. The most important of these hypotheses is how to generate volume from the point cloud exported from CT or MRI images, not paying attention to the wall thickness and its effect in computational fluid dynamic method, statistical logic of aerosol trap in software; and most importantly, the viscoelastic effect of respiratory tract wall in living tissue pointed in the fluid-structure interaction method. So that applying the viscoelastic dynamic mesh effect in the form of the moving deforming mesh can be very effective in achieving more appropriate response quality. Also, changing the volume fraction of the pulmonary extracellular matrix constituents leads to changes in elastic modulus (storage modulus) and the viscous modulus (loss modulus) of lung tissue. Therefore, in the biomedical computational methods where the model wall is considered flexible, the viscoelastic properties of the texture must be considered correctly.

Regulatory safety pharmacology and toxicity assessments of a standardized stem extract of Cassia occidentalis Linn. in rodents

Cassia occidentalis Linn (CO) is an annual/perennial plant having traditional uses in the treatments of ringworm, gastrointestinal ailments and piles, bone fracture, and wound healing. Previously, we confirmed the medicinal use of the stem extract (ethanolic) of CO (henceforth CSE) in fracture healing at 250 mg/kg dose in rats and described an osteogenic mode of action of four phytochemicals present in CSE. Here we studied CSE's preclinical safety and toxicity. CSE prepared as per regulations of Current Good Manufacturing Practice for human pharmaceuticals/phytopharmaceuticals and all studies were performed in rodents in a GLP-accredited facility. In acute dose toxicity as per New Drug and Clinical Trial Rules, 2019 (prior name schedule Y), in rats and mice and ten-day dose range-finding study in rats, CSE showed no mortality and no gross abnormality at 2500 mg/kg dose. Safety Pharmacology showed no adverse effect on central nervous system, cardiovascular system, and respiratory system at 2500 mg/kg dose. CSE was not mutagenic in the Ames test and did not cause clastogenicity assessed by in vivo bone marrow genotoxicity assay. By a sub chronic (90 days) repeated dose (as per OECD, 408 guideline) study in rats, the no-observed-adverse-effect-level was found to be 2500 mg/kg assessed by clinico-biochemistry and all organs histopathology. We conclude that CSE is safe up to 10X the dose required for its osteogenic effect.

Inhalation Exposure Analysis of Lung-Inhalable Particles in an Approximate Rat Central Airway

Rats have been widely used as surrogates for evaluating the adverse health effects of inhaled airborne particulate matter. This paper presents a computational fluid and particle dynamics (CFPD) study of particle transport and deposition in an approximate rat central airway model. The geometric model was constructed based on magnetic resonance (MR) imaging data sourced from previous study. Lung-inhalable particles covering a diameter range from 20 nm to 1.0 µm were passively released into the trachea, and the Lagrangian particle tracking approach was used to predict individual particle trajectories. Overall, regional and local deposition patterns in the central airway were analyzed in detail. A preliminary interspecies data comparison was made between present rat models and previously published human data. Results showed deposition “hot spots” were mainly concentrated at airway bifurcation apexes, and a gravitational effect should also be considered for inertia particles when using a rat as a laboratory animal. While for humans, this may not happen as the standing posture is completely different. Lastly, the preliminary interspecies data comparison confirms the deposition similarity in terms of deposition enhancement factors, which is a weighted deposition concentration parameter. This interspecies comparison confirms feasibility of extrapolating surrogate rat deposition data to humans using existing data extrapolation approach, which mostly relies on bulk anatomical differences as dose adjustment factors.

Detailed deposition analysis of inertial and diffusive particles in a rat nasal passage

Rats have been widely used as surrogates for evaluating the health effects of inhaled airborne particulate matter. To provide a thorough understanding of particle transport and deposition mechanisms in the rat nasal airway, this article presents a computational fluid dynamics (CFD) study of particle exposure in a realistic rat nasal passage under a resting flow condition. Particles covering a diameter range from 1 nm to 4 µm were passively released in front of the rat's breathing zone, and the Lagrangian particle tracking approach was used to calculate individual particle trajectories. Detailed particle deposition analysis shows the deposition of inertial particles >2 µm is high in the rat nasal vestibule and more than 70% of all inhaled inertial particles were trapped in this region. While for diffusive nanoparticles, the vestibule filtration effect is reduced, only less than 60% of inhaled nanoparticles were blocked by the anterior nasal structures. The particle exposure in the olfactory region only shows notable deposition for diffusive nanoparticles, which peaks at 9.4% for 5 nm particles. Despite the olfactory deposition remains at a low level, the ratio between the olfactory and the main passage is kept around 30-40% for 10-800 nm particles, which indicates a particle-size-independent distribution pattern in the main nasal passage and olfactory. This study provides a deep understanding of particles deposition features in a rat nasal passage, and the research findings can aid toxicologist in inter-species exposure-response extrapolation study.

Numerical Comparison of Nasal Aerosol Administration Systems for Efficient Nose-to-Brain Drug Delivery

PURPOSE

Nose-to-brain drug administration along the olfactory and trigeminal nerve pathways offers an alternative route for the treatment of central nervous system (CNS) disorders. The characterization of particle deposition remains difficult to achieve in experiments. Alternative numerical approach is applied to identify suitable aerosol particle size with maximized inhaled doses.

METHODS

This study numerically compared the drug delivery efficiency in a realistic human nasal cavity between two aerosol drug administration systems targeting the olfactory region: the aerosol mask system and the breath-powered bi-directional system. Steady inhalation and exhalation flow rates were applied to both delivery systems. The discrete phase particle tracking method was employed to capture the aerosol drug transport and deposition behaviours in the nasal cavity. Both overall and regional deposition characteristics were analysed in detail.

RESULTS

The results demonstrated the breath-powered drug delivery approach can produce superior olfactory deposition with peaking olfactory deposition fractions for diffusive 1 nm particles and inertial 10 μm. While for particles in the range of 10 nm to 2 μm, no significant olfactory deposition can be found, indicating the therapeutic agents should avoid this size range when targeting the olfactory deposition.

CONCLUSIONS

The breath-powered bi-directional aerosol delivery approach shows better drug delivery performance globally and locally, and improved drug administration doses can be achieved in targeted olfactory region.

Inhaled diesel emissions generated with cerium oxide nanoparticle fuel additive induce adverse pulmonary and systemic effects

Diesel exhaust (DE) exposure induces adverse cardiopulmonary effects. Cerium oxide nanoparticles added to diesel fuel (DECe) increases fuel burning efficiency but leads to altered emission characteristics and potentially altered health effects. Here, we evaluated whether DECe results in greater adverse pulmonary effects compared with DE. Male Sprague Dawley rats were exposed to filtered air, DE, or DECe for 5 h/day for 2 days. N-acetyl glucosaminidase activity was increased in bronchial alveolar lavage fluid (BALF) of rats exposed to DECe but not DE. There were also marginal but insignificant increases in several other lung injury biomarkers in both exposure groups (DECe > DE for all). To further characterize DECe toxicity, rats in a second study were exposed to filtered air or DECe for 5 h/day for 2 days or 4 weeks. Tissue analysis indicated a concentration- and time-dependent accumulation of lung and liver cerium followed by a delayed clearance. The gas-phase and high concentration of DECe increased lung inflammation at the 2-day time point, indicating that gas-phase components, in addition to particles, contribute to pulmonary toxicity. This effect was reduced at 4 weeks except for a sustained increase in BALF γ-glutamyl transferase activity. Histopathology and transmission electron microscopy revealed increased alveolar septa thickness due to edema and increased numbers of pigmented macrophages after DECe exposure. Collectively, these findings indicate that DECe induces more adverse pulmonary effects on a mass basis than DE. In addition, lung accumulation of cerium, systemic translocation to the liver, and delayed clearance are added concerns to existing health effects of DECe.

Airflow and particle deposition simulations in health and emphysema: from in vivo to in silico animal experiments

Image-based in silico modeling tools provide detailed velocity and particle deposition data. However, care must be taken when prescribing boundary conditions to model lung physiology in health or disease, such as in emphysema. In this study, the respiratory resistance and compliance were obtained by solving an inverse problem; a 0D global model based on healthy and emphysematous rat experimental data. Multi-scale CFD simulations were performed by solving the 3D Navier-Stokes equations in an MRI-derived rat geometry coupled to a 0D model. Particles with 0.95 μm diameter were tracked and their distribution in the lung was assessed. Seven 3D-0D simulations were performed: healthy, homogeneous, and five heterogeneous emphysema cases. Compliance (C) was significantly higher (p = 0.04) in the emphysematous rats (C = 0.37 ± 0.14 cm(3)/cmH2O) compared to the healthy rats (C = 0.25 ± 0.04 cm(3)/cmH2O), while the resistance remained unchanged (p = 0.83). There were increases in airflow, particle deposition in the 3D model, and particle delivery to the diseased regions for the heterogeneous cases compared to the homogeneous cases. The results highlight the importance of multi-scale numerical simulations to study airflow and particle distribution in healthy and diseased lungs. The effect of particle size and gravity were studied. Once available, these in silico predictions may be compared to experimental deposition data.

Rat airway morphometry measured from in situ MRI-based geometric models

Rodents have been widely used to study the environmental or therapeutic impact of inhaled particles. Knowledge of airway morphometry is essential in assessing geometric influence on aerosol deposition and in developing accurate lung models of aerosol transport. Previous morphometric studies of the rat lung performed ex situ provided high-resolution measurements (50-125 μm). However, it is unclear how the overall geometry of these casts might have differed from the natural in situ appearance. In this study, four male Wistar rat (268 ± 14 g) lungs were filled sequentially with perfluorocarbon and phosphate-buffered saline before being imaged in situ in a 7-T magnetic resonance (MR) scanner at a resolution of 0.2 × 0.2 × 0.27 mm. Airway length, diameter, gravitational, bifurcation, and rotational angles were measured for the first four airway generations from 3D geometric models built from the MR images. Minor interanimal variability [expressed by the relative standard deviation RSD (=SD/mean)] was found for length (0.18 ± 0.07), diameter (0.15 ± 0.15), and gravitational angle (0.12 ± 0.06). One rat model was extended to 16 airway generations. Organization of the airways using a diameter-defined Strahler ordering method resulted in lower interorder variability than conventional generation-based grouping for both diameter (RSD = 0.12 vs. 0.42) and length (0.16 vs. 0.67). Gravitational and rotational angles averaged 82.9 ± 37.9° and 53.6 ± 24.1°, respectively. Finally, the major daughter branch bifurcated at a smaller angle (19.3 ± 14.6°) than the minor branch (60.5 ± 19.4°). These data represent the most comprehensive set of rodent in situ measurements to date and can be used readily in computational studies of lung function and aerosol exposure.

Development of an in vitro model to assess deposition of aerosol particles in a representative replica of the rat's respiratory tract

BACKGROUND

Small rodents continue to be the mainstay for the assessment of pharmacological and toxicological data of inhaled therapeutics. For meaningful interpretation of the results information about deposition of aerosol particles in the respiratory tract is warranted, but not trivial to obtain for animals with nose-only aerosol exposure. The purpose of this study was to develop and evaluate a general method to characterize the deposition of inhaled test particles in an in vitro model (IVR) of the rat's respiratory tract.

METHODS

A highly detailed, realistic and representative image using micro-CT scanning technology was obtained and the generated morphological data was used to construct a plastic replica of the average rat respiratory tract. The model was connected to a rodent ventilator, which allowed the breathing frequency (f, min(-1)) and tidal volume (V(T), mL) to be varied as required. Polydisperse fluorescent microsphere particles with an average mass median aerodynamic diameter (MMAD) of 3.1 μm and geometric standard deviation (GSD) of 2.2 μm were used as model compound.

RESULTS

Comparison of the experimental data for total and regional deposition levels with predicted outputs using the in silico MPPD model showed reasonably good relative agreement between the two models. The predictions were closest to the experimental values when default respiratory conditions of f=102 breaths/min and V(T) of 2.0 mL were used. Moreover, the IVR model revealed good correlation with published in vivo data.

CONCLUSION

Using the IVR model allows an easy, fast and reasonably precise estimation of the inhaled dose in rodent inhalation studies. The IVR has the potential to be used along with live rats in inhalation exposure studies, and thus provides the unique possibility to run an internal standard for dose deposition in the respiratory tract in each inhalation experiment. This should contribute to enable a greater understanding of drug pharmacokinetics and dynamics in rats and may improve dose extrapolation from animals to humans.

Differential pulmonary retention of diesel exhaust particles in Wistar Kyoto and spontaneously hypertensive rats

Spontaneously hypertensive (SH) and normotensive Wistar Kyoto (WKY) rats have been used for understanding the mechanisms of variations in susceptibility to airborne pollutants. We examined the lung burden of diesel exhaust particles (DEP) following inhalation of diesel engine exhaust (DEE) in both strains. The kinetics of clearance was also examined after single intratracheal (IT) instillation of DEP. Lungs were analyzed for DEP elemental carbon (EC) after exposure to DEE (0, 500, or 2000 microg/m(3) 4 h/day, 5 days/week x 4 weeks). SH rats had 16% less DEP-EC at 500 and 32% less at 2000 microg/m(3) in the lungs, despite having 50% higher than the average minute volume. No strain-related differences were noted in number of alveolar macrophages or their average DEP load as evident from examining cells in bronchoalveolar lavage fluid (BALF). The kinetics of DEP clearance from lungs of male WKY and SH rats was studied following a single instillation at 0.0 or 8.33 mg/kg of DEP standard reference material (SRM 2975) from the National Institute of Standards Technology. SH rats cleared 60% DEP over 112 days while minimal clearance occurred from the lungs of WKY. The pattern of DEP-induced inflammatory response assessed by BALF analysis was similar in both strains, although the overall protein leak was slightly greater in SH rats. A time-dependent accumulation of DEP occurred in tracheal lymph nodes of both strains (SH > WKY). Thus, SH rats may clear DEP more efficiently from their lungs than normotensive WKY rats, with a small contribution of more effective lymphatic drainage.