Spatially controlled cell engineering on biodegradable polymer surfaces

Current Trends, Advances, and Challenges of Tissue Engineering-Based Approaches of Tooth Regeneration: A Review of the Literature

INTRODUCTION

Tooth loss is a significant health issue. Currently, this situation is often treated with the use of synthetic materials such as implants and prostheses. However, these treatment modalities do not fully meet patients' biological and mechanical needs and have limited longevity. Regenerative medicine focuses on the restoration of patients' natural tissues via tissue engineering techniques instead of rehabilitating with artificial appliances. Therefore, a tissue-engineered tooth regeneration strategy seems like a promising option to treat tooth loss.

OBJECTIVE

This review aims to demonstrate recent advances in tooth regeneration strategies and discoveries about underlying mechanisms and pathways of tooth formation.

RESULTS AND DISCUSSION

Whole tooth regeneration, tooth root formation, and dentin-pulp organoid generation have been achieved by using different seed cells and various materials for scaffold production. Bioactive agents are critical elements for the induction of cells into odontoblast or ameloblast lineage. Some substantial pathways enrolled in tooth development have been figured out, helping researchers design their experiments more effectively and aligned with the natural process of tooth formation.

CONCLUSION

According to current knowledge, tooth regeneration is possible in case of proper selection of stem cells, appropriate design and manufacturing of a biocompatible scaffold, and meticulous application of bioactive agents for odontogenic induction. Understanding innate odontogenesis pathways play a crucial role in accurately planning regenerative therapeutic interventions in order to reproduce teeth.

Cell-Biomaterial Constructs for Wound Healing and Skin Regeneration

Over the years, conventional skin grafts, such as full-thickness, split-thickness, and pre-sterilized grafts from human or animal sources, have been at the forefront of skin wound care. However, these conventional grafts are associated with major challenges, including supply shortage, rejection by the immune system, and disease transmission following transplantation. Due to recent progress in nanotechnology and material sciences, advanced artificial skin grafts-based on the fundamental concepts of tissue engineering-are quickly evolving for wound healing and regeneration applications, mainly because they can be uniquely tailored to meet the requirements of specific injuries. Despite tremendous progress in tissue engineering, many challenges and uncertainties still face skin grafts in vivo, such as how to effectively coordinate the interaction between engineered biomaterials and the immune system to prevent graft rejection. Furthermore, in-depth studies on skin regeneration at the molecular level are lacking; as a consequence, the development of novel biomaterial-based systems that interact with the skin at the core level has also been slow. This review will discuss 1) the biological aspects of wound healing and skin regeneration, 2) important characteristics and functions of biomaterials for skin regeneration applications, and 3) synthesis and applications of common biomaterials for skin regeneration. Finally, the current challenges and future directions of biomaterial-based skin regeneration will be addressed.

Covalent attachment of three derivatives of pegylated RGD peptides on the NH2-terminated silicon surfaces: Impact on fibroblast cell behavior

This paper describes a simple strategy for covalent immobilization of the NHS-PEG-RGD peptide with the three different PEG lengths (8, 13, and 22) onto the amine-terminated monolayers with the subsequent investigation of fibroblast cellular response to the three derivatives of pegylated RGD peptides-modified substrates. First, acetamide-terminated monolayers were prepared on the hydride terminated silicon surface to protect NH2-terminated monolayers. This was followed by the removal of the protective groups, and the reaction of NHS-PEG8-RGD, NHS-PEG13-RGD and NHS-PEG22-RGD peptides with the NH2-terminated monolayers while reducing nonspecific protein adsorption. Analysis of X-ray photoelectron spectroscopy (XPS), Fourier Transform Infrared (ATR-FTIR) spectroscopy, and Ellipsometry measurements demonstrated that PEG13-RGD peptide forms relatively a more homogenous, thicker and stable structure compared with those of PEG8-RGD and PEG22-RGD peptide. The quantitative and qualitative assessment of cell adhesion, spreading, and proliferation indicated that relatively further elongated fibroblast cells attached on the PEG13-RGD peptide relative to those on the PEG8-RGD and PEG22-RGD peptide. The results presented here may offer a developed strategy based on the length of the spacer to regulate cellular behavior on the surface substrates.

Engineered neural circuits for modeling brain physiology and neuropathology

The neural circuits of the central nervous system are the regulatory pathways for feeling, motion control, learning, and memory, and their dysfunction is closely related to various neurodegenerative diseases. Despite the growing demand for the unraveling of the physiology and functional connectivity of the neural circuits, their fundamental investigation is hampered because of the inability to access the components of neural circuits and the complex microenvironment. As an alternative approach, in vitro human neural circuits show principles of in vivo human neuronal circuit function. They allow access to the cellular compartment and permit real-time monitoring of neural circuits. In this review, we summarize recent advances in reconstituted in vitro neural circuits using engineering techniques. To this end, we provide an overview of the fabrication techniques and methods for stimulation and measurement of in vitro neural circuits. Subsequently, representative examples of in vitro neural circuits are reviewed with a particular focus on the recapitulation of structures and functions observed in vivo, and we summarize their application in the study of various brain diseases. We believe that the in vitro neural circuits can help neuroscience and the neuropharmacology. STATEMENT OF SIGNIFICANCE: Despite the growing demand to unravel the physiology and functional connectivity of the neural circuits, the studies on the in vivo neural circuits are frequently limited due to the poor accessibility. Furthermore, single neuron-based analysis has an inherent limitation in that it does not reflect the full spectrum of the neural circuit physiology. As an alternative approach, in vitro engineered neural circuit models have arisen because they can recapitulate the structural and functional characteristics of in vivo neural circuits. These in vitro neural circuits allow the mimicking of dysregulation of the neural circuits, including neurodegenerative diseases and traumatic brain injury. Emerging in vitro engineered neural circuits will provide a better understanding of the (patho-)physiology of neural circuits.

High-Throughput Routes to Biomaterials Discovery

Many existing clinical treatments are limited in their ability to completely restore decreased or lost tissue and organ function, an unenviable situation only further exacerbated by a globally aging population. As a result, the demand for new medical interventions has increased substantially over the past 20 years, with the burgeoning fields of gene therapy, tissue engineering, and regenerative medicine showing promise to offer solutions for full repair or replacement of damaged or aging tissues. Success in these fields, however, inherently relies on biomaterials that are engendered with the ability to provide the necessary biological cues mimicking native extracellular matrixes that support cell fate. Accelerating the development of such "directive" biomaterials requires a shift in current design practices toward those that enable rapid synthesis and characterization of polymeric materials and the coupling of these processes with techniques that enable similarly rapid quantification and optimization of the interactions between these new material systems and target cells and tissues. This manuscript reviews recent advances in combinatorial and high-throughput (HT) technologies applied to polymeric biomaterial synthesis, fabrication, and chemical, physical, and biological screening with targeted end-point applications in the fields of gene therapy, tissue engineering, and regenerative medicine. Limitations of, and future opportunities for, the further application of these research tools and methodologies are also discussed.

Electrospun Nanofibers of Natural and Synthetic Polymers as Artificial Extracellular Matrix for Tissue Engineering

Many types of polymer nanofibers have been introduced as artificial extracellular matrices. Their controllable properties, such as wettability, surface charge, transparency, elasticity, porosity and surface to volume proportion, have attracted much attention. Moreover, functionalizing polymers with other bioactive components could enable the engineering of microenvironments to host cells for regenerative medical applications. In the current brief review, we focus on the most recently cited electrospun nanofibrous polymeric scaffolds and divide them into five main categories: natural polymer-natural polymer composite, natural polymer-synthetic polymer composite, synthetic polymer-synthetic polymer composite, crosslinked polymers and reinforced polymers with inorganic materials. Then, we focus on their physiochemical, biological and mechanical features and discussed the capability and efficiency of the nanofibrous scaffolds to function as the extracellular matrix to support cellular function.

DNA Origami Nanoarrays for Multivalent Investigations of Cancer Cell Spreading with Nanoscale Spatial Resolution and Single-Molecule Control

We present a strategy for the fabrication of biomimetic nanoarrays, based on the use of DNA origami, that permits the multivalent investigation of ligand-receptor molecule interactions in cancer cell spreading, with nanoscale spatial resolution and single-molecule control. We employed DNA origami to control the nanoscale spatial organization of integrin- and epidermal growth factor (EGF)-binding ligands that modulate epidermal cancer cell behavior. By organizing these multivalent DNA nanostructures in nanoarray configurations on nanopatterned surfaces, we demonstrated the cooperative behavior of integrin and EGF ligands in the spreading of human cutaneous melanoma cells: this cooperation was shown to depend on both the number and ratio of the selective ligands employed. Notably, the multivalent biochips we have developed allowed for this cooperative effect to be demonstrated with single-molecule control and nanoscale spatial resolution. By and large, the platform presented here is of general applicability for the study, with molecular control, of different multivalent interactions governing biological processes from the function of cell-surface receptors to protein-ligand binding and pathogen inhibition.

Microwave-assisted synthesis and evaluation of type 1 collagen-apatite composites for dental tissue regeneration

The aim was to develop an economical and biocompatible collagen-based bioactive composite for tooth regeneration. Acid-soluble collagen was extracted and purified from fish scales. The design was innovated to molecularly tailor the surface charge sites of the nano-apatite providing chemical bonds with the collagen matrix via microwave irradiation technique. The obtained collagen was identified by sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis. The composites were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis/differential scanning calorimetry, and scanning electron microscopy. MC3T3-E1 cell lines were used to assess the biological effects of these materials by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetra zolium bromide (MTT) assay. Indirect contact test was performed by extracting representative elutes in cell culture media and sulforhodamine B analysis was performed. Chorioallantoic membrane assay was conducted to define the new vessels formation behavior. The purity of collagen extracts was determined and showed two α-chains, i.e. the characteristic of type I collagen. Fourier transform infrared spectroscopy showed the characteristic peaks for amide I, I, III, and phosphate for collagen and composites. Scanning electron microscopy images showed three-dimensional mesh of collagen/apatite nano-fibers. Nontoxic behavior of composites was observed and there were graded and dose-related effects on experimental compounds. The angiogenesis and vessels formation behavior were observed in bioactive collagen composite. The obtained composites have potential to be used for tooth structure regeneration.

Strategically Designing a Pumpless Microfluidic Device on an "Inert" Polypropylene Substrate with Potential Application in Biosensing and Diagnostics

This study is an attempt to make a step forward to implement the very immature concept of pumpless transportation of liquid into a real miniaturized device or lab-on-chip (LOC) on a plastic substrate. "Inert" plastic materials such as polypropylene (PP) are used in a variety of biomedical applications but their surface engineering is very challenging. Here, it was demonstrated that with a facile innovative wettability patterning route using fluorosilanized UV-independent TiO₂ nanoparticle coating it is possible to create wedge-shaped open microfluidic tracks on inert solid surfaces for low-cost biomedical devices (lab-on-plastic). For the future miniaturization and integration of the tracks into a device, a variety of characterization techniques were used to not only systematically study the surface patterning chemistry and topography but also to have a clear knowledge of its biological interactions and performance. The effect of such surface architecture on the biological performance was studied in terms of static/dynamic protein (bovine serum albumin) adsorption, bacterial (Staphylococcus aureus and Staphylococcus epidermidis) adhesion, cell viability (using HeLa and MCF-7 cancer cell lines as well as noncancerous human fibroblast cells), and cell patterning (Murine embryonic fibroblasts). Strategies are discussed for incorporating such a confined track into a diagnostic device in which its sensing portion is based on protein, microorganism, or cells. Finally, for the proof-of-principle of biosensing application, the well-known high-affinity molecular couple of BSA-antiBSA as a biological model was employed.

Growth factor-eluting technologies for bone tissue engineering

Growth factors are essential orchestrators of the normal bone fracture healing response. For non-union defects, delivery of exogenous growth factors to the injured site significantly improves healing outcomes. However, current clinical methods for scaffold-based growth factor delivery are fairly rudimentary, and there is a need for greater spatial and temporal regulation to increase their in vivo efficacy. Various approaches used to provide spatiotemporal control of growth factor delivery from bone tissue engineering scaffolds include physical entrapment, chemical binding, surface modifications, biomineralization, micro- and nanoparticle encapsulation, and genetically engineered cells. Here, we provide a brief review of these technologies, describing the fundamental mechanisms used to regulate release kinetics. Examples of their use in pre-clinical studies are discussed, and their capacities to provide tunable, growth factor delivery are compared. These advanced scaffold systems have the potential to provide safer, more effective therapies for bone regeneration than the systems currently employed in the clinic.

Adding Functions to Biomaterial Surfaces through Protein Incorporation

The concept of biomaterials has evolved from one of inert mechanical supports with a long-term, biologically inactive role in the body into complex matrices that exhibit selective cell binding, promote proliferation and matrix production, and may ultimately become replaced by newly generated tissues in vivo. Functionalization of material surfaces with biomolecules is critical to their ability to evade immunorecognition, interact productively with surrounding tissues and extracellular matrix, and avoid bacterial colonization. Antibody molecules and their derived fragments are commonly immobilized on materials to mediate coating with specific cell types in fields such as stent endothelialization and drug delivery. The incorporation of growth factors into biomaterials has found application in promoting and accelerating bone formation in osteogenerative and related applications. Peptides and extracellular matrix proteins can impart biomolecule- and cell-specificities to materials while antimicrobial peptides have found roles in preventing biofilm formation on devices and implants. In this progress report, we detail developments in the use of diverse proteins and peptides to modify the surfaces of hard biomaterials in vivo and in vitro. Chemical approaches to immobilizing active biomolecules are presented, as well as platform technologies for isolation or generation of natural or synthetic molecules suitable for biomaterial functionalization.

Bridging the Gap: From 2D Cell Culture to 3D Microengineered Extracellular Matrices

Historically the culture of mammalian cells in the laboratory has been performed on planar substrates with media cocktails that are optimized to maintain phenotype. However, it is becoming increasingly clear that much of biology discerned from 2D studies does not translate well to the 3D microenvironment. Over the last several decades, 2D and 3D microengineering approaches have been developed that better recapitulate the complex architecture and properties of in vivo tissue. Inspired by the infrastructure of the microelectronics industry, lithographic patterning approaches have taken center stage because of the ease in which cell-sized features can be engineered on surfaces and within a broad range of biocompatible materials. Patterning and templating techniques enable precise control over extracellular matrix properties including: composition, mechanics, geometry, cell-cell contact, and diffusion. In this review article we explore how the field of engineered extracellular matrices has evolved with the development of new hydrogel chemistry and the maturation of micro- and nano- fabrication. Guided by the spatiotemporal regulation of cell state in developing tissues, techniques for micropatterning in 2D, pseudo-3D systems, and patterning within 3D hydrogels will be discussed in the context of translating the information gained from 2D systems to synthetic engineered 3D tissues.

Biodegradable PEG-Based Amphiphilic Block Copolymers for Tissue Engineering Applications

Biodegradable tissue engineering scaffolds have great potential for delivering cells/therapeutics and supporting tissue formation. Polyesters, the most extensively investigated biodegradable synthetic polymers, are not ideally suited for diverse tissue engineering applications due to limitations associated with their hydrophobicity. This review discusses the design and applications of amphiphilic block copolymer scaffolds integrating hydrophilic poly(ethylene glycol) (PEG) blocks with hydrophobic polyesters. Specifically, we highlight how the addition of PEG results in striking changes to the physical properties (swelling, degradation, mechanical, handling) and biological performance (protein & cell adhesion) of the degradable synthetic scaffolds in vitro. We then perform a critical review of how these in vitro characteristics translate to the performance of biodegradable amphiphilic block copolymer-based scaffolds in the repair of a variety of tissues in vivo including bone, cartilage, skin, and spinal cord/nerve. We conclude the review with recommendations for future optimizations in amphiphilic block copolymer design and the need for better-controlled in vivo studies to reveal the true benefits of the amphiphilic synthetic tissue scaffolds.

Self-assembly of diblock copolymer confined in an array-structure space

The combination of top-down and bottom-up technologies is an effective method to create the novel nanostructures with long range order in the field of advanced materials manufacture. In this work, we employed a polymeric self-consistent field theory to investigate the pattern formation of diblock copolymer in a 2D confinement system designed by filling pillar arrays with various 2D shapes such as squares, rectangles, and triangles. Our simulation shows that in such confinement system, the microphase structure of diblock copolymer strongly depends on the pitch, shape, size, and rotation of the pillar as well as the surface field of confinement. The array structures can not only induce the formation of new phase patterns but also control the location and orientation of pattern structures. Finally, several methods to tune the commensuration and frustration of array-structure confinement are proposed and examined.

Seeding of mesenchymal stem cells into inner part of interconnected porous biodegradable scaffold by a new method with a filter paper

An appropriate physical support provided by scaffolds creates a supportive environment that directs proliferation and differentiation of stem cells. However, it is difficult to homogenously inoculate stem cells into the inner part of scaffolds at high cell densities. In this study, mesenchymal stem cells were seeded into a hydroxyapatite/poly (D, L-lactic-co-glycolic acid) (HAP/PLGA) scaffold that had enough mechanical strength and porous 3-D structure. With an aid of a filter paper placed under the bottom of a HAP/PLGA block, the cells suspended in a culture medium flowed from the top to the bottom through interconnected pores in the scaffold, and distributed almost homogenously, as compared to cell distribution near the surface of the block by the conventional method using centrifugation or reduced pressure. This simple method with a filter paper may be useful in preparation of cell-scaffold complexes for tissue engineering.

Fabrication and characteristics of chitosan sponge as a tissue engineering scaffold

Cells, growth factors, and scaffolds are the three main factors required to create a tissue-engineered construct. After the appearance of bovine spongiform encephalopathy (BSE), considerable attention has therefore been focused on nonbovine materials. In this study, we examined the properties of a chitosan porous scaffold. A porous chitosan sponge was prepared by the controlled freezing and lyophilization of different concentrations of chitosan solutions. The materials were examined by scanning electron microscopy, and the porosity, tensile strength, and basic fibroblast growth factor (bFGF) release profiles from chitosan sponge were examined in vitro. The morphology of the chitosan scaffolds presented a typical microporous structure, with the pore size ranging from 50 to 200 μm. The porosity of chitosan scaffolds with different concentrations was approximately 75–85%. A decreasing tendency for porosity was observed as the concentration of the chitosan increased. The relationship between the tensile properties and chitosan concentration indicated that the ultimate tensile strength for the sponge increased with a higher concentration. The in vitro bFGF release study showed that the higher the concentration of chitosan solution became, the longer the releasing time of the bFGF from the chitosan sponge was.

Wharton's Jelly human mesenchymal stem cell contact guidance by noisy nanotopographies

The development of biomaterials ensuring proper cell adhesion, polarization, migration and differentiation represents a true enabler for successful tissue-engineering applications. Surface nanostructuring was suggested as a promising method for improving cell-substrate interaction. Here, we study Wharton's Jelly human Mesenchymal Stem Cells (WJ-hMSC) interacting with nanogratings (NGs) having a controlled amount of nanotopographical noise (nTN). Our data demonstrate that unperturbed NGs induce cell polarization, alignment and migration along NG lines. The introduction of nTN dramatically modifies this behavior and leads to a marked loss of cell polarization and directional migration, even at low noise levels. High-resolution focal adhesions (FAs) imaging showed that this behavior is caused by the release of the geometrical vinculum imposed by the NGs to FA shaping and maturation. We argue that highly anisotropic nanopatterned scaffolds can be successfully exploited to drive stem cell migration in regenerative medicine protocols and discuss the impact of scaffold alterations or wear.

Synthesis of biotinylated aldehyde polymers for biomolecule conjugation

Biotinylated polymers with side-chain aldehydes were prepared for use as multifunctional scaffolds. Two different biotin-containing chain transfer agents (CTAs) and an aldehyde-containing monomer, 6-oxohexyl acrylate (6OHA), are synthesized. Poly(ethylene glycol) methyl ether acrylate (PEGA) and 6OHA are copolymerized by reversible addition-fragmentation chain transfer (RAFT) polymerization in the presence of the biotinylated CTAs. The resulting polymers are analyzed by GPC and(1) H NMR spectroscopy. The polymer end groups contained a disulfide bond, which could be readily reduced in solution to remove the biotin. Reactivity of the aldehyde side chains is demonstrated by oxime and hydrazone formation at the polymer side chains, and conjugate formation of fluorescently labeled polymers with streptavidin is investigated by gel electrophoresis.

Bottom-up approach to build osteon-like structure by cell-laden photocrosslinkable hydrogel

Based on photocrosslinkable PEGDMA and GelMA hydrogels, two "bottom-up" approaches ("circle-and-cross" and "layer-by-layer") were successfully developed to construct osteon-like structures with microchannel networks. Significantly, the "layer-by-layer" approach employing the GelMA hydrogel with a higher biocompatibility was more favorable for building biomimetic osteon.

Bacterial cellulose modified using recombinant proteins to improve neuronal and mesenchymal cell adhesion

A wide variety of biomaterials and bioactive molecules have been applied as scaffolds in neuronal tissue engineering. However, creating devices that enhance the regeneration of nervous system injuries is still a challenge, due the difficulty in providing an appropriate environment for cell growth and differentiation and active stimulation of nerve regeneration. In recent years, bacterial cellulose (BC) has emerged as a promising biomaterial for biomedical applications because of its properties such as high crystallinity, an ultrafine fiber network, high tensile strength, and biocompatibility. The small signaling peptides found in the proteins of extracellular matrix are described in the literature as promoters of adhesion and proliferation for several cell lineages on different surfaces. In this work, the peptide IKVAV was fused to a carbohydrate-binding module (CBM3) and used to modify BC surfaces, with the goal of promoting neuronal and mesenchymal stem cell (MSC) adhesion. The recombinant proteins IKVAV-CBM3 and (19)IKVAV-CBM3 were successfully expressed in E. coli, purified through affinity chromatography, and stably adsorbed to the BC membranes. The effect of these recombinant proteins, as well as RGD-CBM3, on cell adhesion was evaluated by MTS colorimetric assay. The results showed that the (19)IKVAV-CBM3 was able to significantly improve the adhesion of both neuronal and mesenchymal cells and had no effect on the other cell lineages tested. The MSC neurotrophin expression in cells grown on BC membranes modified with the recombinant proteins was also analyzed.

Tissue engineering in the development of replacement technologies

The field of tissue engineering is generating new scaffolds, bioreactors and methods for stimulating cells within complex cultures, with the aim of recreating the conditions under which cells form functional tissues. Hitherto, the primary focus of this field has been on clinical applications. However, there are many methods of in vitro tissue engineering that represent new opportunities in 3D cell culture and could be the basis for new replacement methods that either replace the use of a tissue isolated from an animal or the use of a living animal. This chapter presents an overview of tissue engineering and provides tissue-specific examples of recent advances.

Rapid spatial and temporal controlled signal delivery over large cell culture areas

Controlled chemical delivery in microfluidic cell culture devices often relies on slowly evolving diffusive gradients, as the spatial and temporal control provided by fluid flow results in significant cell-perturbation. In this paper we introduce a microfluidic device architecture that allows for rapid spatial and temporal soluble signal delivery over large cell culture areas without fluid flow over the cells. In these devices the cell culture well is divided from a microfluidic channel located directly underneath the chamber by a nanoporous membrane. This configuration requires chemical signals in the microchannel to only diffuse through the thin membrane into large cell culture area, rather than diffuse in from the sides. The spatial chemical pattern within the microfluidic channel was rapidly transferred to the cell culture area with good fidelity through diffusion. The cellular temporal response to a step-function signal showed that dye reached the cell culture surface within 45 s, and achieved a static concentration in under 6 min. Chemical pulses of less than one minute were possible by temporally alternating the signal within the microfluidic channel, enabling rapid flow-free chemical microenvironment control for large cell culture areas.

Patterning of Cells on Bioresist for Tissue Engineering Applications

Engineering functional tissues and organs successfully depends on the ability to control cell orientation and distribution. Materials used for such purposes therefore have to be designed to facilitate cell distribution and eventually guide tissue regeneration in 3D.The field of tissue engineering hinges on developing degradable polymeric scaffolds that promote cell proliferation and expression of desired physiological behaviors through careful control of the polymer surface.

The development of materials for tissue engineering and guided tissue regeneration has accelerated over the last decade.[1] It has been demonstrated that non-patterned cells are effectively not tissue. “Tissues require that cells be placed and hold precise places often with precise orientations” [2–3]. Cell patterning is therefore very important for tissue engineering. We have developed a biocompatible, biostable chemically amplified bioresist, with which patterns are generated without involving harsh chemical treatment.

Fabrication of a nanofibrous scaffold with improved bioactivity for culture of human dermal fibroblasts for skin regeneration

Engineering dermal substitutes with electrospun nanofibres have lately been of prime importance for skin tissue regeneration. Simple electrospinning technology served to produce nanofibrous scaffolds morphologically and structurally similar to the extracellular matrix of native tissues. The nanofibrous scaffolds of poly(L-lactic acid)-co-poly(ε-caprolactone) (PLACL) and PLACL/gelatin complexes were fabricated by the electrospinning process. These nanofibres were characterized for fibre morphology, membrane porosity, wettability and chemical properties by FTIR analysis to culture human foreskin fibroblasts for skin tissue engineering. The nanofibre diameter was obtained between 282 and 761 nm for PLACL and PLACL/gelatin scaffolds; expressions of amino and carboxyl groups and porosity up to 87% were obtained for these fibres, while they also exhibited improved hydrophilic properties after plasma treatment. The results showed that fibroblasts proliferation, morphology, CMFDA dye expression and secretion of collagen were significantly increased in plasma-treated PLACL/gelatin scaffolds compared to PLACL nanofibrous scaffolds. The obtained results prove that the plasma-treated PLACL/gelatin nanofibrous scaffold is a potential biocomposite material for skin tissue regeneration.

Neural differentiation directed by self-assembling peptide scaffolds presenting laminin-derived epitopes

We prepared biofunctionalized matrices for cell growth using (RADA)(3)IKVAV(RADA)(3) ((Arg-Ala-Asp-Ala)(3)-Ile-Lys-Val-Ala-Val-(Arg-Ala-Asp-Ala)(3)) and (RADA)(4)IKVAV ((Arg-Ala-Asp-Ala)(4)-Ile-Lys-Val-Ala-Val), self-assembling peptides with a laminin-derived sequence inserted between and attached terminally to the repeats of RADA, respectively. The material-cell interactions were investigated with PC12, a cell line commonly used as a model for studying neural differentiation. The behavior of PC12 and especially the neural differentiation was guided by the presence of IKVAV. Furthermore, the cell-material interactions were dependent on the culture dimensionality and the position of IKVAV in the self-assembling peptide template. In the two-dimensional (2-D) culture, matrices containing IKVAV stimulated significantly longer neurite outgrowths from PC12 cells than did (RADA)(4). More pronounced effect was observed in (RADA)(3)IKVAV(RADA)(3) than in (RADA)(4)IKVAV. In the three-dimensional (3-D) culture, neurite outgrowth was not observed in the biofunctionalized matrices. Instead, cells displayed higher proliferation rate and survived longer culture time than in the 2-D culture, with such enhancement being most significant in (RADA)(3)IKVAV(RADA)(3.) Despite the lack of differentiation phenotype, the cells grown in 3-D biofunctionalized matrices were primed for differentiation, as evident by enhanced neurite outgrowth, increased neurite networking, and up-regulated expression of differentiation markers upon their reintroduction to the 2-D culture condition on petri dish. With the ease of incorporating biofunctional epitopes, and the flexibility to support either 2-D or 3-D culture, self-assembling peptides provide versatile scaffolds to study the multiple facets of biomaterial-cell interactions.

Advanced printing and deposition methodologies for the fabrication of biosensors and biodevices

Advanced printing and deposition methodologies are revolutionising the way biological molecules are deposited and leading to changes in the mass production of biosensors and biodevices. This revolution is being delivered principally through adaptations of printing technologies to device fabrication, increasing throughputs, decreasing feature sizes and driving production costs downwards. This review looks at several of the most relevant deposition and patterning methodologies that are emerging, either for their high production yield, their ability to reach micro- and nano-dimensions, or both. We look at inkjet, screen, microcontact, gravure and flexographic printing as well as lithographies such as scanning probe, photo- and e-beam lithographies and laser printing. We also take a look at the emerging technique of plasma modification and assess the usefulness of these for the deposition of biomolecules and other materials associated with biodevice fabrication.

Patterned and switchable surfaces for biomolecular manipulation

The interactions of biomolecules and cells with solid interfaces play a pivotal role in a range of biomedical applications and have therefore been studied in great detail. An improved understanding of these interactions results in the ability to manipulate DNA, proteins and other biomolecules, as well as cells, spatially and temporally at surfaces with high precision. This in turn engenders the development of advanced devices, such as biosensors, bioelectronic components, smart biomaterials and microarrays. Spatial control can be achieved by the production of patterned surface chemistries using modern high-resolution patterning technologies based on lithography, microprinting or microfluidics, whilst temporal control is accessible through the application of switchable surface architectures. The combination of these two surface properties offers unprecedented control over the behaviour of biomolecules and cells at the solid-liquid interface. This review discusses the behaviour of biomolecules and cells at solid interfaces and highlights fundamental and applied research exploring patterned and switchable surfaces.

Growth of outgrowth endothelial cells on aligned PLLA nanofibrous scaffolds

Tissue engineering holds great promise in providing vascular grafts as substitutes for damaged small-diameter blood vessels. Two of the key factors in vascular tissue engineering are biocompatible scaffolds that mimic the effects of extracellular matrix and the source of seeding cells. Synthetic poly-L-lactic acid (PLLA) nanofibers has been shown to be excellent scaffolds for tissue engineering. Outgrowth endothelial cells (OECs) isolated from human peripheral blood could also be expanded in vitro and stably maintain the differentiated phenotypes and could be used as the seeding cells for engineering autologous vascular crafts. Here we tested the possibility of combining these two together. We found that PLLA nanofibers are not only biocompatible with OECs originally isolated from rabbit peripheral blood, the aligned PLLA fibers actually promoted and guided their sustained proliferation. These results suggest that aligned PLLA could be excellent both as the scaffolds and as a promoter of cell growth during vascular tissue engineering.

Adhesion molecule-modified biomaterials for neural tissue engineering

Adhesion molecules (AMs) represent one class of biomolecules that promote central nervous system regeneration. These tethered molecules provide cues to regenerating neurons that recapitulate the native brain environment. Improving cell adhesive potential of non-adhesive biomaterials is therefore a common goal in neural tissue engineering. This review discusses common AMs used in neural biomaterials and the mechanism of cell attachment to these AMs. Methods to modify materials with AMs are discussed and compared. Additionally, patterning of AMs for achieving specific neuronal responses is explored.

Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing

Organ or tissue printing, a novel approach in tissue engineering, creates layered, cell-laden hydrogel scaffolds with a defined three-dimensional (3D) structure and organized cell placement. In applying the concept of tissue printing for the development of vascularized bone grafts, the primary focus lies on combining endothelial progenitors and bone marrow stromal cells (BMSCs). Here we characterize the applicability of 3D fiber deposition with a plotting device, Bioplotter, for the fabrication of spatially organized, cell-laden hydrogel constructs. The viability of printed BMSCs was studied in time, in several hydrogels, and extruded from different needle diameters. Our findings indicate that cells survive the extrusion and that their subsequent viability was not different from that of unprinted cells. The applied extrusion conditions did not affect cell survival, and BMSCs could subsequently differentiate along the osteoblast lineage. Furthermore, we were able to combine two distinct cell populations within a single scaffold by exchanging the printing syringe during deposition, indicating that this 3D fiber deposition system is suited for the development of bone grafts containing multiple cell types.

Differentiation stage alters matrix control of stem cells

Cues from the material to which a cell is adherent (e.g., adhesion ligand presentation, substrate elastic modulus) clearly influence the phenotype of differentiated cells. However, it is currently unclear if stem cells respond similarly to these cues. This study examined how the overall density and nanoscale organization of a model cell adhesion ligand (arginine-glycine-aspartic acid [RGD] containing peptide) presented from hydrogels of varying stiffness regulated the proliferation of a clonally derived stem cell line (D1 cells) and preosteoblasts (MC3T3-E1). While the growth rate of MC3T3-E1 preosteoblasts was responsive to nanoscale RGD ligand organization and substrate stiffness, the D1 stem cells were less sensitive to these cues in their uncommitted state. However, once the D1 cells were differentiated towards the osteoblast lineage, they became more responsive to these signals. These results demonstrate that the cell response to material cues is dependent on the stage of cell commitment or differentiation, and these findings will likely impact the design of biomaterials for tissue regeneration.

Catch strip assay for the relative assessment of two-dimensional protein association kinetics

Accurate interpretation of recruitment rate measurements of microscale particles, such as cells and microbeads, to biofunctional surfaces is difficult because factors such as uneven ligand distributions, particle collisions, variable particle fluxes, and molecular-scale surface separation distances obfuscate the ability to link the observed particle behavior with the governing nanoscale biophysics. We report the development of a hydrodynamically conditioned micropattern catch strip assay to measure microparticle recruitment kinetics. The assay exploited patterning within microfluidic channels and the mechanostability of selectin bonds to create reaction geometries that confined a microbead flux to within 200 nm of the surface under flow conditions. Systematic control of capillary action enabled the creation of homogeneous or gradient ligand distributions. The method enabled the measurement of particle recruitment rates (keff, s-1) that were primarily determined by the interaction of the biomolecular pair being investigated. The method is therefore well suited for relative measurements of delivery vehicle and cellular recruitment potential as governed by surface-bound molecules.