The effect of titanium particulate on development and maintenance of a posterolateral spinal arthrodesis: an in vivo rabbit model

Advances in implants and bone graft types for lumbar spinal fusion surgery

The increasing prevalence of spinal disorders worldwide necessitates advanced treatments, particularly interbody fusion for severe cases that are unresponsive to non-surgical interventions. This procedure, especially 360° lumbar interbody fusion, employs an interbody cage, pedicle screw-and-rod instrumentation, and autologous bone graft (ABG) to enhance spinal stability and promote fusion. Despite significant advancements, a persistent 10% incidence of non-union continues to result in compromised patient outcomes and escalated healthcare costs. Innovations in lumbar stabilisation seek to mimic the properties of natural bone, with evolving implant materials like titanium (Ti) and polyetheretherketone (PEEK) and their composites offering new prospects. Additionally, biomimetic cages featuring precisely engineered porosities and interconnectivity have gained traction, as they enhance osteogenic differentiation, support osteogenesis, and alleviate stress-shielding. However, the limitations of ABG, such as harvesting morbidities and limited fusion capacity, have spurred the exploration of sophisticated solutions involving advanced bone graft substitutes. Currently, demineralised bone matrix and ceramics are in clinical use, forming the basis for future investigations into novel bone graft substitutes. Bioglass, a promising newcomer, is under investigation despite its observed rapid absorption and the potential for foreign body reactions in preclinical studies. Its clinical applicability remains under scrutiny, with ongoing research addressing challenges related to burst release and appropriate dosing. Conversely, the well-documented favourable osteogenic potential of growth factors remains encouraging, with current efforts focused on modulating their release dynamics to minimise complications. In this evidence-based narrative review, we provide a comprehensive overview of the evolving landscape of non-degradable spinal implants and bone graft substitutes, emphasising their applications in lumbar spinal fusion surgery. We highlight the necessity for continued research to improve clinical outcomes and enhance patient well-being.

Serum Titanium Levels Remain Elevated But Urine Titanium is Undetectable in Children With Early Onset Scoliosis Undergoing Growth-Friendly Surgical Treatment: A Prospective Study

BACKGROUND

Elevated serum titanium levels have been found in patients with early onset scoliosis (EOS) treated with traditional growing rods (TGR), magnetically controlled growing rods (MCGR), and vertical expandable prosthetic titanium rib (VEPTR). No studies have investigated whether serum titanium remains persistently elevated and if titanium is excreted. Our purpose was to compare serum titanium levels in patients with EOS with growth-friendly instrumentation to age-matched controls and evaluate urine titanium and serial serum titanium levels in patients with EOS.

METHODS

This was a prospective case-control study. Patients with EOS with TGR, MCGR, or VEPTR underwent urine titanium and serial serum titanium collection at a minimum 6-month interval. Control patients did not have a history of metal implant insertion and underwent serum titanium collection before fracture fixation.

RESULTS

Twenty patients with EOS (6 TGR, 8 MCGR, and 6 VEPTR) and 12 controls were analyzed. The control group had no detectable serum titanium (0 ng/mL), whereas the patients with EOS had a median serum titanium of 4.0 ng/mL ( P < 0.001). Analysis of variance showed significantly higher median serum titanium levels in the MCGR and VEPTR groups than the TGR group at time point 1 (5.5 vs 6.0 vs 2.0 ng/mL, P = 0.01) and time point 2 (6.5 vs 7.5 vs 2.0 ng/mL, P < 0.001). Binary comparisons showed a significant difference in serum titanium level between TGR and MCGR (time point 1: P = 0.026, time point 2: P = 0.011) and TGR and VEPTR (time point 1: P = 0.035, time point 2: P = 0.003). However, there was no difference between MCGR and VEPTR (time point 1: P = 0.399, time point 2: P = 0.492) even though the VEPTR group had a longer duration of follow-up ( P = 0.001) and a greater number of lengthenings per patient at the first serum collection ( P = 0.016). No patients with EOS had detectable urine titanium.

CONCLUSIONS

Patients with EOS treated with titanium alloy growth-friendly instrumentation had elevated serum titanium levels compared with age-matched controls that persisted over time with no evidence of renal excretion. Additional studies are necessary to assess for local and systemic accumulation of titanium and the significance of long-term exposure to titanium in growing children.

LEVEL OF EVIDENCE

Level III, therapeutic.

An Analysis of a Decade of Lumbar Interbody Cage Failures in the United States: A MAUDE Database Study

STUDY DESIGN

A retrospective case series.

OBJECTIVE

This study aims to assess the rates of lumbar interbody cage failures based on their material and manufacturer.

SUMMARY OF BACKGROUND DATA

Perioperative lumbar interbody cage malfunctions are underreported events in the spine literature and may result in complications. Although the Food and Drug Administration ensures the safety of these devices under physiological conditions after implantation, these devices may experience nonphysiological conditions during implantation, which may be overlooked.

MATERIALS AND METHODS

The MAUDE database was examined for reports of lumbar cage device malfunctions from 2012 to 2021. Each report was categorized based on failure type and implant design. A market analysis was performed by dividing the total number of failures per year for each manufacturer by their approximate yearly revenue from spinal implants in the United States. Outlier analysis was performed to generate a threshold value above which failure rates were defined as greater than the normal index.

RESULTS

Overall, 1875 lumbar cage malfunctions were identified. Of these, 1230 (65.6%) were cage breakages, 257 (13.7%) were instrument malfunctions, 177 (9.4%) were cage migrations, 143 (7.6%) were assembly failures, 70 (4.5%) were screw-related failures, and 21 (1.1%) were cage collapses. Of the breakages, 923 (74.9%) occurred during insertion or impaction and 97 entries detailed a medical complication or a retained foreign body. Of the migrations, 155 (88.6%) were identified postoperatively, of which 73 (47.1%) detailed complications and 52 (33.5%) required a revision procedure. Market analysis demonstrated that Medtronic, Zimmer Biomet, Stryker, Seaspine, and K2M exceeded the calculated threshold.

CONCLUSIONS

Lumbar cages with polyether ether ketone core material failed more frequently by breakage, whereas titanium surface cages failed more frequently by migration. Failure rates varied depending on the manufacturer. Most cage breakages identified in the present study occurred intraoperatively during implantation. These findings call for a more detailed Food and Drug Administration evaluation of these intraoperative malfunctions before commercial approval.

LEVEL OF EVIDENCE

Level 4.

Exfoliated oral mucosa cells as bioindicators of short- and long-term systemic titanium contamination

BACKGROUND

Humans are exposed to exogenous sources of titanium-containing particles that can enter the body mainly by inhalation, ingestion, or dermal absorption. Given the widespread use of biomaterials in medicine, the surface of a titanium (Ti) biomedical device is a potential endogenous source of Ti ions and/or Ti-containing particles, such as TiO₂ micro-(MPs) and nano-particles (NPs), resulting from biotribocorrosion processes. Ti ions or Ti-containing particles may deposit in epithelial cells of the oral mucosa, and the latter may therefore serve as bioindicators of short and long-term systemic Ti contamination. The aim of the present study was to histologically and quantitatively evaluate the presence of Ti traces in cells exfoliated from the oral mucosa as possible bioindicators of systemic contamination with this metal at short and long-term experimental time points METHODS: Thirty Wistar rats were intraperitoneally injected with a suspension of titanium dioxide (TiO₂) (0.16 g/100 g body weight of TiO₂ in 5 ml of NaCl 0.9%) using 5 nm NPs (Group: TiO₂-NP5; n = 10), 45 µm MPs (Group: TiO₂-MP45; n = 10), or vehicle alone (Control group; n = 10). At one and six months post-injection, right-cheek mucosa cells were obtained by exfoliative cytology using a cytobrush; they were spray fixed and stained using Safranin or the Papanicolaou technique. The smears were cytologically evaluated (light microscopy) to determine the presence of particulate material, which was also analyzed microchemically (SEM-EDS). Left-cheek mucosa cells were similarly obtained and re-suspended in 5 ml of PBS (pH: 7.2-7.4); the samples corresponding to each group were pooled together and analyzed spectrometrically (ICP-MS) to determine Ti concentration in each of the studied groups. Blood samples were obtained for histological determination of the presence of particulate material on Safranin-stained blood smears and determination of plasma concentration of Ti by ICP-MS RESULTS: Different size and shape metal-like particles were observed inside and outside epithelial cells in TiO₂-NP5 and TiO₂-MP45 cytological smears at both one and six months post-injection. EDS analysis showed the presence of Ti in the particles. ICP-MS revealed higher Ti concentrations in both TiO₂ injected groups compared to the control group. In addition, Ti concentration did not vary with time or particle size. Monocytes containing particles were observed in blood smears of TiO₂-exposed animals one- and six-months post-injection. Plasma levels of Ti were significantly higher in TiO₂-NP5- and TiO₂-MP45- exposed animals than in controls (p < 0.05), and Ti concentration was significantly higher at one month than at six months in both TiO₂-exposed groups (p < 0.05).

CONCLUSIONS

Cells exfoliated from the oral mucosa could be used as bioindicators of short- and long-term systemic contamination with Ti. Exfoliative cytology could be used as a simple, non-invasive, and inexpensive diagnostic method for monitoring biotribocorrosion of Ti implants and patient clinical follow-up.

Are Serum Ion Levels Elevated in Pediatric Patients With Metal Implants?

BACKGROUND

Previous studies report elevated serum titanium (Ti) levels in children with spinal implants. To provide additional data on this topic, we sought to assess serum ion levels at multiple timepoints in pediatric patients with growing spine devices, spinal fusion instrumentation, and extremity implants placed for fracture treatment. We hypothesized that serum Ti, cobalt (Co), and chromium (Cr) levels would be elevated in pediatric patients with growing spine devices compared with patients with extremity implants.

METHODS

Pediatric patients undergoing any primary spine implant placement, those with spine implant revision or removal surgery and patients with other appendicular implant removal had serum Ti, Co, and Cr ion levels drawn at the time of surgery. Fifty-one patients (12 growing spine devices, 13 fusions, and 26 extremity implants) had one set of labs, 31 of whom had labs drawn both preoperatively and postoperatively. Biopsies obtained from tissue specimens at the time of implant revision were analyzed histologically for the presence of metal debris and macrophage activity.

RESULTS

Patients with growing spine implants had elevated serum Ti (3.3 vs. 1.9 ng/mL, P=0.01) and Cr levels (1.2 vs. 0.27 ng/mL, P=0.01) in comparison to patients with fusion rods or extremity implants. With respect to patients with extremity implants, patients with growing spine devices had elevated serum Ti (3.3 vs. 0.98 ng/mL, P=0.013), Co (0.63 vs. 0.26 ng/mL, P=0.017), and Cr levels (1.18 vs. 0.26 ng/mL, P=0.005). On matched pairs analysis, patients who had labs drawn before and after spine implantation had significant increase in serum Ti levels (0.57 vs. 3.3 ng/mL, P=0.02). Histology of tissue biopsies adjacent to growing spine implants showed presence of metal debris and increased macrophage activity compared with patients with extremity implants.

CONCLUSION

Serum Ti, Co, and Cr levels are elevated in children with spinal implants compared with those with extremity implants, particularly in those with growing spine devices. However, the clinical significance of these findings remains to be determined.

LEVEL OF EVIDENCE

Level II-prospective comparative study.

Elevated Serum Titanium Levels in Children With Early Onset Scoliosis Treated With Growth-friendly Instrumentation

BACKGROUND

A previous study showed significantly higher serum titanium levels in patients with early-onset scoliosis (EOS) treated with traditional growing rods (TGR) and magnetically controlled growing rods (MCGR) compared with controls. Children with vertical expandable prosthetic titanium rib (VEPTR) were not assessed. The purpose of this study was to compare serum titanium levels in EOS patients treated with TGR, MCGR, and VEPTR. We hypothesized that EOS patients treated with all forms of growth-friendly instrumentation (GFI) have elevated serum titanium levels.

METHODS

This was a prospective cross-sectional case series. Serum titanium levels were collected from patients with GFI who were enrolled in an EOS database. Blood samples were collected at a clinic visit or lengthening/exchange procedure between April and December 2018. The normal range for serum titanium is 0 to 1 ng/mL. Analyses were conducted using analysis of variance and Bonferroni post hoc test.

RESULTS

A total of 23 patients (2 TGR, 8 MCGR, 13 VEPTR) were analyzed. There was a significant difference in age at the time of blood sample collection (12.5 vs. 9.8 vs. 7.5 y, P=0.015) and serum titanium level (1.5 vs. 4.5 vs. 7.6 ng/mL, P=0.021) between TGR, MCGR, and VEPTR, respectively. All of the MCGR and VEPTR patients had a serum titanium level ≥2 ng/mL. Binary comparisons showed that VEPTR had a significantly higher serum titanium level than TGR (P=0.046). There was no difference in serum titanium level when MCGR was compared with TGR and VEPTR. Time from implant insertion to blood sample collection, number of rods currently implanted, total number of rods implanted throughout treatment, and number of lengthenings per patient was similar between the groups.

CONCLUSIONS

Elevated serum titanium levels may be present in EOS patients treated with all forms of GFI. Although our TGR patients had indwelling implants for the longest period of time, they had the lowest serum titanium level. Repetitive chest wall motion during respiration may lead to continued wear and metal ion release with VEPTR.

LEVEL OF EVIDENCE

Level II-therapeutic.

Delayed periprosthetic collection after cervical disc arthroplasty

Cervical disc arthroplasty is a treatment option for symptomatic cervical disc disease. There is a paucity of literature on long-term safety outcomes, durability, and device-related failure rates. The M6-C artificial cervical disc is a device with titanium alloy endplates and a complex polymeric centerpiece. To date, trials have exhibited acceptable safety profiles.This case series describes the presentation, management, and pathological findings of a delayed prevertebral periprosthetic mass anterior to the M6-C disc. Four patients at 3 different institutions underwent cervical disc replacement with the M6-C disc. Two to seven years postoperatively, they presented with dysphagia secondary to a compressive mass anterior to the disc. Case notes were reviewed to collect data on symptoms, management, and outcomes. The patients were systemically well and presented with progressive dysphagia. They had imaging findings of a mass anterior to the disc. They underwent a decompressive procedure, with 2 patients undergoing device removal and fusion. In 2 cases, a soft-tissue mass was seen intraoperatively, with frank pus. In 3 cases, Propionibacterium acnes was identified and antibiotic treatment given. Histopathology demonstrated mixed inflammatory infiltrates with foreign body-type granulomas. Postoperatively, the dysphagia resolved.The development of delayed dysphagia in a patient with an M6-C disc should prompt investigation to identify a mass lesion. To the authors' knowledge, this is the first report of delayed infection, or suspected delayed-type hypersensitivity reaction, following M6-C disc implantation. It is important for this to be added to the device safety concerns. Further prospective studies are needed to establish the incidence and the long-term safety and failure rates of the M6-C disc.

Neurotoxicity mediated by oxidative stress caused by titanium dioxide nanoparticles in human neuroblastoma (SH-SY5Y) cells

BACKGROUND

Titanium is widely used in biomedicine. Due to biotribocorrosion, titanium dioxide (TiO₂) nanoparticles (NPs) can be released from the titanium implant surface, enter the systemic circulation, and migrate to various organs and tissues including the brain. A previous study showed that 5 nm TiO₂ NPs reached the highest concentration in the brain. Even though TiO₂ NPs are believed to possess low toxicity, little is known about their neurotoxic effects. The aim of the study was to evaluate in vitro the effects of 5 nm TiO₂ NPs on a human neuroblastoma (SH-SY5Y) cell line.

METHODS

Cell cultures were divided into non-exposed and exposed to TiO₂ NPs for 24 h. The following were evaluated: reactive oxygen species (ROS) generation, apoptosis, cellular antioxidant response, endoplasmic reticulum stress and autophagy.

RESULTS

Exposure to TiO₂ NPs induced ROS generation in a dose dependent manner, with values reaching up to 10 fold those of controls (p < 0.001). Nrf2 nuclear localization and autophagy, also increased in a dose dependent manner. Apoptosis increased by 4- to 10-fold compared to the control group, depending on the dose employed.

CONCLUSIONS

Our results show that TiO₂ NPs cause ROS increase, induction of ER stress, Nrf2 cytoplasmic translocation to the nucleus and apoptosis. Thus, neuroblastoma cell response to TiO₂ NPs may be associated with an imbalance of the oxidative metabolism where endoplasmic reticulum-mediated signal pathway seems to be the main neurotoxic mechanism.

Neural cell responses to wear debris from metal-on-metal total disc replacements

PURPOSE

Total disc replacements, comprising all-metal articulations, are compromised by wear and particle production. Metallic wear debris and ions trigger a range of biological responses including inflammation, genotoxicity, cytotoxicity, hypersensitivity and pseudotumour formation, therefore we hypothesise that, due to proximity to the spinal cord, glial cells may be adversely affected.

METHODS

Clinically relevant cobalt chrome (CoCr) and stainless steel (SS) wear particles were generated using a six-station pin-on-plate wear simulator. The effects of metallic particles (0.5-50 μm³ debris per cell) and metal ions on glial cell viability, cellular activity (glial fibrillary acidic protein (GFAP) expression) and DNA integrity were investigated in 2D and 3D culture using live/dead, immunocytochemistry and a comet assay, respectively.

RESULTS

CoCr wear particles and ions caused significant reductions in glial cell viability in both 2D and 3D culture systems. Stainless steel particles did not affect glial cell viability or astrocyte activation. In contrast, ions released from SS caused significant reductions in glial cell viability, an effect that was especially noticeable when astrocytes were cultured in isolation without microglia. DNA damage was observed in both cell types and with both biomaterials tested. CoCr wear particles had a dose-dependent effect on astrocyte activation, measured through expression of GFAP.

CONCLUSIONS

The results from this study suggest that microglia influence the effects that metal particles have on astrocytes, that SS ions and particles play a role in the adverse effects observed and that SS is a less toxic biomaterial than CoCr alloy for use in spinal devices. These slides can be retrieved under Electronic Supplementary Material.

Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model

BACKGROUND CONTEXT

There is significant variability in the materials commonly used for interbody cages in spine surgery. It is theorized that three-dimensional (3D)-printed interbody cages using porous titanium material can provide more consistent bone ingrowth and biological fixation.

PURPOSE

The purpose of this study was to provide an evidence-based approach to decision-making regarding interbody materials for spinal fusion.

STUDY DESIGN

A comparative animal study was performed.

METHODS

A skeletally mature ovine lumbar fusion model was used for this study. Interbody fusions were performed at L2-L3 and L4-L5 in 27 mature sheep using three different interbody cages (ie, polyetheretherketone [PEEK], plasma sprayed porous titanium-coated PEEK [PSP], and 3D-printed porous titanium alloy cage [PTA]). Non-destructive kinematic testing was performed in the three primary directions of motion. The specimens were then analyzed using micro-computed tomography (µ-CT); quantitative measures of the bony fusion were performed. Histomorphometric analyses were also performed in the sagittal plane through the interbody device. Outcome parameters were compared between cage designs and time points.

RESULTS

Flexion-extension range of motion (ROM) was statistically reduced for the PTA group compared with the PEEK cages at 16 weeks (p-value=.02). Only the PTA cages demonstrated a statistically significant decrease in ROM and increase in stiffness across all three loading directions between the 8-week and 16-week sacrifice time points (p-value≤.01). Micro-CT data demonstrated significantly greater total bone volume within the graft window for the PTA cages at both 8 weeks and 16 weeks compared with the PEEK cages (p-value<.01).

CONCLUSIONS

A direct comparison of interbody implants demonstrates significant and measurable differences in biomechanical, µ-CT, and histologic performance in an ovine model. The 3D-printed porous titanium interbody cage resulted in statistically significant reductions in ROM, increases in the bone ingrowth profile, as well as average construct stiffness compared with PEEK and PSP.

Stainless steel wear debris of a scoliotic growth guidance system has little local and systemic effect in an animal model

Options to treat early-onset scoliosis include guided-growth systems with sliding action between rods and pedicle screws. The wear was previously measured in an in vitro test, and in this in vivo rabbit model, we evaluated the local and systemic biological response to the stainless steel debris. Compared to the previous study, a relatively higher volume of representative wear particles with a median particle size of 0.84 μm were generated. Bolus dosages were injected into the epidural space at L4-L5 for a minimum of 36 rabbits across three treatment groups (negative control, 1.5 mg, and 4.0 mg) and two timepoints (12 and 24 weeks). Gross pathology evaluated distant organs and the injection site with a dorsal laminectomy to examine the epidural space and dosing site. Peri-implanted particle tissues were stained for immunohistochemical and quantitatively analyzed for IL-6 and TNF-α cytokines. Based on ISO 10993-6:2007 scoring, particles in the high-dose group were primarily non-irritant (12 weeks) with one slightly irritant. At 24 weeks, inflammatory cell infiltration was non-existent to minimal with all groups considered non-irritant at the injection site. Material characterization confirmed that particles detected in distant organs were stainless steel or contaminants. At 12 weeks, stainless steel groups demonstrated statistically increased amounts of cytokine levels compared to control but there was a statistical decrease for both at 24 weeks. These findings indicate that stainless steel wear debris, comparable to the expected usage from a simulated growth guidance system, had no discernible untoward biological effects locally and systemically in an animal model. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1980-1990, 2018.

Histopathological Effects of Titanium Dioxide Nanoparticles and The Possible Protective Role of N-Acetylcysteine on The Testes of Male Albino Rats

BACKGROUND

Titanium dioxide (TiO₂) is a white pigment which is used in paints, plastics, etc. It is reported that TiO₂ induces oxidative stress and DNA damage. N-acetylcysteine (NAC) has been used to fight oxidative stress-induced damage in different tissues. The objective of this study was to evaluate the toxic effects of orally administered TiO₂ nanoparticles and the possible protective effect of NAC on the testes of adult male albino rats.

MATERIALS AND METHODS

In this experimental study, 50 adult male albino rats were classified into five groups. Group I was the negative control, group II was treated with gum acacia solution , group III was treated with NAC, group IV was treated with TiO₂ nanoparticles, and group V was treated with 100 mg/kg of NAC and 1200 mg/kg TiO₂ nanoparticles. Total testosterone, glutathione (GSH), and serum malondialdehyde (MDA) levels were estimated. The testes were subjected to histopathological, electron microscopic examinations, and immunohistochemical detection for tumor necrosis factor (TNF)-α. Cells from the left testis were examined to detect the degree of DNA impairment by using the comet assay.

RESULTS

TiO₂ nanoparticles induced histopathological and ultrastructure changes in the testes as well as positive TNF-α immunoreaction in the testicular tissue. Moreover, there was an increase in serum MDA while a decrease in testosterone and GSH levels in TiO₂ nanoparticles-treated group. TiO₂ resulted in DNA damage. Administration of NAC to TiO₂- treated rats led to improvement of the previous parameters with modest protective effects against DNA damage.

CONCLUSION

TiO₂-induced damage to the testes was mediated by oxidative stress. Notably, administration of NAC protected against TiO₂'s damaging effects.

Impaction durability of porous polyether-ether-ketone (PEEK) and titanium-coated PEEK interbody fusion devices

BACKGROUND CONTEXT

Various surface modifications, often incorporating roughened or porous surfaces, have recently been introduced to enhance osseointegration of interbody fusion devices. However, these topographical features can be vulnerable to damage during clinical impaction. Despite the potential negative impact of surface damage on clinical outcomes, current testing standards do not replicate clinically relevant impaction loading conditions.

PURPOSE

The purpose of this study was to compare the impaction durability of conventional smooth polyether-ether-ketone (PEEK) cervical interbody fusion devices with two surface-modified PEEK devices that feature either a porous structure or plasma-sprayed titanium coating.

STUDY DESIGN/SETTING

A recently developed biomechanical test method was adapted to simulate clinically relevant impaction loading conditions during cervical interbody fusion procedures.

METHODS

Three cervical interbody fusion devices were used in this study: smooth PEEK, plasma-sprayed titanium-coated PEEK, and porous PEEK (n=6). Following Kienle et al., devices were impacted between two polyurethane blocks mimicking vertebral bodies under a constant 200 N preload. The posterior tip of the device was placed at the entrance between the polyurethane blocks, and a guided 1-lb weight was impacted upon the anterior face with a maximum speed of 2.6 m/s to represent the strike force of a surgical mallet. Impacts were repeated until the device was fully impacted. Porous PEEK durability was assessed using micro-computed tomography (µCT) pre- and postimpaction. Titanium-coating coverage pre- and postimpaction was assessed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy. Changes to the surface roughness of smooth and titanium-coated devices were also evaluated.

RESULTS

Porous PEEK and smooth PEEK devices showed minimal macroscopic signs of surface damage, whereas the titanium-coated devices exhibited substantial visible coating loss. Quantification of the porous PEEK deformation demonstrated that the porous structure maintained a high porosity (>65%) following impaction that would be available for bone ingrowth, and exhibited minimal changes to pore size and depth. SEM and energy dispersive X-ray spectroscopy analysis of titanium-coated devices demonstrated substantial titanium coating loss after impaction that was corroborated with a decrease in surface roughness. Smooth PEEK showed minimal signs of damage using SEM, but demonstrated a decrease in surface roughness.

CONCLUSION

Although recent surface modifications to interbody fusion devices are beneficial for osseointegration, they may be susceptible to damage and wear during impaction. The current study found porous PEEK devices to show minimal damage during simulated cervical impaction, whereas titanium-coated PEEK devices lost substantial titanium coverage.

Nano-sized titanium dioxide toxicity in rat prostate and testis: Possible ameliorative effect of morin

This study investigated the effect of short-term oral exposure to nano-sized titanium dioxide (nTiO₂) on Wistar rat prostate and testis, and the associating reproductive-related alterations. The study also evaluated the potential ameliorative effect of the natural flavonoid, morin, on nTiO₂-induced aberrations. Intragastric administration of nTiO₂ (50mg/kg/day for 1, 2 and 3weeks) increased testicular gamma-glutamyltransferase (γ-GT) activity and decreased testicular steroidogenic acute regulatory protein (StAR) and c-kit gene expression, serum testosterone level and sperm count. nTiO₂-treated rats also exhibited prostatic and testicular altered glutathione levels, elevated TNF-α levels, up-regulated Fas, Bax and caspase-3 gene expression, down-regulated Bcl-2 gene expression and enhanced prostatic lipid peroxidation. Sperm malformation and elevated testicular acid phosphatase (ACP) activity and malondialdehyde level, serum prostatic acid phosphatase activity, prostate specific antigen (PSA), gonadotrophin and estradiol levels occurred after the 2 and 3week regimens. Morin (30mg/kg/day administered intragastrically for 5weeks) mitigated nTiO₂-induced prostatic and testicular injury as evidenced by lowering serum PSA level, testicular γ-GT and ACP activities and TNF-α level, along with hampering both intrinsic and extrinsic apoptotic pathways. Moreover, morin alleviated prostatic lipid peroxidation, raised prostatic glutathione level, and relieved testicular reductive stress. Additionally, morin increased testicular StAR and c-kit mRNA expression, raised the sperm count, reduced sperm deformities and modified the altered hormone profile. Histopathological evaluation supported the biochemical findings. In conclusion, morin could ameliorate nTiO₂-induced prostatic and testicular injury and the corresponding reproductive-related aberrations via redox regulatory, anti-inflammatory and anti-apoptotic mechanisms, promoting steroidogenesis and spermatogenesis, and improving sperm count and morphology.

Highlights in nanocarriers for the treatment against cervical cancer

Cervical cancer is the second most common malignant tumor in women worldwide and has a high mortality rate, especially when it is associated with human papillomavirus (HPV). In US, an estimated 12,820 cases of invasive cervical cancer and an estimated 4210 deaths from this cancer will occur in 2017. With rare and very aggressive conventional treatments, one sees in the real need of new alternatives of therapy as the delivery of chemotherapeutic agents by nanocarriers using nanotechnology. This review covers different drug delivery systems applied in the treatment of cervical cancer, such as solid lipid nanoparticles (SNLs), liposomes, nanoemulsions and polymeric nanoparticles (PNPs). The main advantages of drug delivery thus improving pharmacological activity, improving solubility, bioavailability to bioavailability reducing toxicity in the target tissue by targeting of ligands, thus facilitating new innovative therapeutic technologies in a too much needed area. Among the main disadvantage is the still high cost of production of these nanocarriers. Therefore, the aim this paper is review the nanotechnology based drug delivery systems in the treatment of cervical cancer.

Capsulated Metallic Debris Tumor Mass Mimicking Adjacent Segment Disease: A Case Report

STUDY DESIGN

A case report.

OBJECTIVE

To inform the spine surgeons another cause of late complications after instrumented spinal fusion surgery.

SUMMARY OF BACKGROUND DATA

Posterior lumbar instrumented fusion has been widely applied as an effective procedure for treating patients with degenerative lumbar spine disease. The development of pathology at the mobile segment adjacent to the lumbar spinal fusion has been termed as adjacent segment disease.

METHODS

Most patients with adjacent segment disease present with recurrent back pain, sciatica, intermittent claudication, or even muscle weakness. Herein, we report the case of a 58-year-old man with posterior lumbar instrumented fusion at L4-L5 who complained of recurrent neurological symptoms mimicking adjacent instability and stenosis. In addition to severe adjacent stenosis at L3-L4, preoperative magnetic resonance imaging showed an intraspinal extradural tumor-like mass with compression of the neurological elements.

RESULTS

The well-capsulated tumor mass was gently dissected and meticulously excised without injury to the adhesive dura or nerve roots. The tumor specimen was fixed in formalin, and then decalcified and tinted using several special stains, which conformed metallic wear debris, resulting in foreign body reaction.

CONCLUSIONS

The metallic wear particulates may initiate a cascade of immune and inflammatory responses. Therefore, attention should be paid to patients who are found to have loosening of the implants at the metal-metal or metal-bone interface.

In Vitro Therapeutic Potential of Tio2 Nanoparticles Against Human Cervical Carcinoma Cells

Cellular and physiological responses to the degradation products of titanium implants are key indicators to determine the quality of biocompatibility of implant devices. The present study investigated titanium dioxide (TiO2) nanoparticle-induced cytotoxicity, apoptotic morphological modification, and apoptotic-related gene expressions in the human cervical carcinoma cells. TiO2 nanoparticle-induced cytotoxicity on cancer cells was determined by the sulphorhodamine-B assay. Apoptotic morphological modification such as nuclear fragmentation, rounding, cytoplasm shrinkage, loss of adhesion, and reduced cell volume were observed by an inverted, fluorescence, and confocal laser scanning microscope (CLSM). The DNA fragmentation study showed the occurrence of necrosis and apoptosis in nanoparticle-treated cells. The qPCR study showed the increased p53 and bax mRNA expression in the nanoparticle-treated cells compared to control. In addition, caspase 3 activity was increased in nanoparticle-treated cells, which indicates the increased auto-catalysis. Taking all these data together, it may suggest that TiO2 nanoparticle could inhibit the growth of HeLa cells.

Clinical and radiologic comparison of dynamic cervical implant arthroplasty and cervical total disc replacement for single-level cervical degenerative disc disease

Anterior cervical discectomy and fusion, to date the most successful spine procedure for the surgical treatment of cervical radiculopathy, has limitations that have led to the development of non-fusion cervical procedures, such as cervical total disc replacement (TDR) and dynamic cervical implant (DCI) arthroplasty. We compared the clinical and radiological results of DCI and cervical TDR for the treatment of single-level cervical degenerative disc disease in Chinese patients. A retrospective review of 179 patients with cervical spondylotic myelopathy who underwent DCI or TDR between April 2010 and October 2012 was conducted, and 152 consecutive patients (67 patients single-level DCI and 85 single-level TDR) who completed at least 2years of follow-up were included. Clinical and radiological assessments were performed preoperatively and at 1week and 3, 6, 12, and 24months postoperatively. The most common operative level was C5/C6 (49.3%). The differences in blood loss, duration of surgery, and duration of hospitalization were not statistically significant. The Japanese Orthopaedic Association scale, Visual Analog Scale, Neck Disability Index, and Short Form-36 scores improved significantly after surgery in both the DCI and TDR groups (P<0.05), but the differences were not statistically significant at the final follow-up. The rate of occurrence of heterotopic ossification was 22.4% and 28.2% in the DCI and TDR groups, respectively. As an effective non-fusion technique, DCI is a more economical procedure. Further prospective, randomized studies with long-term follow-up periods are needed to determine the long-term effects.

Does impaction of titanium-coated interbody fusion cages into the disc space cause wear debris or delamination?

BACKGROUND CONTEXT

A large number of interbody fusion cages are made of polyetheretherketone (PEEK). To improve bone on-growth, some are coated with a thin layer of titanium. This coating may fail when subjected to shear loading.

PURPOSE

The purpose of this testing was to investigate whether impaction of titanium-coated PEEK cages into the disc space can result in wear or delamination of the coating, and whether titanium cages with subtractive surface etching (no coating) are less susceptible to such failure.

STUDY DESIGN/SETTING

A biomechanical study was carried out to simulate the impaction process in clinical practice and to evaluate if wear or delamination may result from impaction.

MATERIALS AND METHODS

Two groups of posterior lumbar interbody fusion cages with a similar geometry were tested: n=6 titanium-coated PEEK and n=6 surface-etched titanium cages. The cages were impacted into the space in between two vertebral body substitutes (polyurethane foam blocks). The two vertebral body substitutes were fixed in a device, through which a standardized axial preload of 390 N was applied. The anterior tip of the cage was positioned at the posterior border of the space between the two vertebral body substitutes. The cages were then inserted using a drop weight with a mass representative of a surgical hammer. The drop weight impacted the insertion instrument at a maximum speed of about 2.6 m/s, which is in the range of the impaction speed in vivo. This was repeated until the cages were fully inserted. The wear particles were captured and analyzed according to the pertinent standards.

RESULTS

The surface-etched titanium cages did not show any signs of wear debris or surface damage. In contrast, the titanium-coated PEEK cages resulted in detached wear particles of different sizes (1-191 µm). Over 50% of these particles had a size <10 µm. In median, on 26% of the implants' teeth, the coating was abraded. Full delamination was not observed.

CONCLUSIONS

In contrast to the surface-etched implants, the titanium-coated PEEK implants lost some coating material. This was visible to the naked eye. More than half of all particles were of a size range that allows phagocytosis. This study shows that titanium-coated implants are susceptible to impaction-related wear debris.

Amelioration of titanium dioxide nanoparticles-induced liver injury in mice: possible role of some antioxidants

This study investigates the efficacy of idebenone, carnosine and vitamin E in ameliorating some of the biochemical indices induced in the liver of titanium dioxide nanoparticles (TiO2 NPs) intoxicated mice. Nano-anatase TiO2 (21 nm) was administered (150 mg/kg/day) for 2 weeks followed by the aforementioned antioxidants either alone or in combination for 1 month. TiO2 NPs significantly increased serum liver function enzyme activities, liver coefficient and malondialdehyde levels in hepatic tissue. They also suppressed hepatic glutathione level and triggered an inflammatory response via the activation of macrophages and the enhancement of tumor necrosis factor-α and interleukin-6 levels. Moreover, the mRNA expression of nuclear factor-erythroid-2-related factor 2, nuclear factor kappa B and Bax was up-regulated whereas that of Bcl-2 was down-regulated following TiO2 NPs. Additionally, these NPs effectively activated caspase-3 and caused liver DNA damage. Oral administration of idebenone (200mg/kg), carnosine (200mg/kg) and vitamin E (100mg/kg) alleviated the hazards of TiO2 NPs with the combination regimen showing a relatively higher effect. The histopathological examination reinforced these findings. In conclusion, oxidative stress could be regarded as a key player in TiO2 NPs-induced liver injury. The study also highlights the anti-inflammatory and the anti-apoptotic potentials of these antioxidants against the detrimental effects of TiO2 NPs.

Local and systemic metal ion release occurs intraoperatively during correction and instrumented spinal fusion for scoliosis

STUDY DESIGN

Prospective pilot study.

OBJECTIVES

The aim of this study was to measure titanium, niobium and aluminium levels in various intraoperative and postoperative samples to determine patterns of metal ion release that occur within the first month following instrumented spinal fusion. Raised serum metal ion levels are reported following instrumented spinal fusion in adolescent idiopathic scoliosis. The exact topological origin and chronology of metal ion release remains conjectural. Recent literature suggests an immediate rise in serum metal levels within the first postoperative week.

METHODS

Titanium, niobium and aluminium levels were measured before, during and after surgery in serum and local intraoperative fluid samples obtained from two pediatric patients undergoing posterior correction and instrumentation for scoliosis.

RESULTS

Measurable metal ion levels were detected in all local samples obtained from wound irrigation fluid, cell saver blood, and fluid that immersed metal universal reduction screw tabs. Postoperative serum metal ion levels were elevated compared to baseline preoperative levels. In general, metal ion levels were considerably higher in the intraoperative fluid samples compared to those observed in the serum levels.

CONCLUSION

Our findings of contextually high metal ion concentrations in intraoperative and early postoperative samples provide further empirical support of a 'putting-in' phenomenon of metal ion release following instrumented spinal fusion. This challenges existing beliefs that metal ion release occurs during an intermediate 'wearing-in' phase. We recommend thorough irrigation of the operative site prior to wound closure to dilute and remove intraoperative metal ion debris. Possibilities of filtering trace metal ions from cell saver content may be considered.

Metal hypersensitivity in patient with posterior lumbar spine fusion: a case report and its literature review

BACKGROUND

Metal hypersensitivity, mostly documented in prosthesis implantation, is a rare complication after arthroplasty. Such cases become rarer and more difficult to diagnose when it comes to lumbar surgery.

CASE PRESENTATION

We present the case of a 52-year-old female patient with reoccured low back pain and sciatica after posterior lumbar decompression and fusion (PLDF) for her lumbar disc herniation. The initial clinical and radiological examinations showed no pathologies. Further imaging and histopathological studies in later period revealed an aseptic loosening of the hardware and an aseptic inflammatory response which was diagnosed to be metal hypersensitivity. To our knowledge, few allergic cases in the matter of spinal fusion were reported so far.

CONCLUSIONS

Metal hypersensitivity after spinal fusion should be considered in patients with representation of postoperative back pain. And elaborate history taking would conduce a lot to it's diagnose.

Mega-granuloma After Using the Universal Clamp for Adolescent Idiopathic Scoliosis: What Is It and Can It Be Prevented?

STUDY DESIGN

Clinical case series.

OBJECTIVE

To characterize the postoperative course and histopathology of peri-implant tissue of adolescent idiopathic scoliosis patients who experienced postoperative development of an aseptic soft tissue reaction, with granulomas adjacent to the sublaminar polyethylene terephthalate strap-titanium clamp used in Zimmer's Universal Clamp (UC) spinal fixation system after spinal surgery.

BACKGROUND SUMMARY

The UC was designed for use with spinal deformity procedures in place of pedicle screws, hooks, or sublaminar wiring in fusion constructs. Recent studies of the UC lack emphasis on implant-related postoperative complications.

METHODS

A total of 26 consecutive patients who underwent spinal deformity correction for scoliosis were reviewed for implant-related postoperative complications. Histology, scanning electron microscopy with energy-dispersive X-ray spectroscopy, fractional culture/biopsy, and Gram stain examination of the peri-implant tissue of patients with complications was performed.

RESULTS

The authors reviewed 26 cases for correction of scoliosis. Two patients with adolescent idiopathic scoliosis who used the UC experienced implant-related complications with development of an aseptic soft tissue reaction with granulomas adjacent to the sublaminar polyethylene terephthalate straps-titanium clamp mechanism of the UC 8 months after AIS correction surgery. There were no signs or symptoms of wound infection. Gram stain revealed no organisms. There were many neutrophils and the surface of the wound revealed rare Staphylococcus aureus but the deep portions of the wounds were negative for organisms. Histopathology revealed extensive granulation tissue and histiocytes with engulfed birefringent particles or debris, and scanning electron microscopy with energy-dispersive X-ray spectroscopy analysis revealed macrophages containing many particles identified as titanium.

CONCLUSIONS

adolescent idiopathic scoliosis patients who use the novel UC construct may develop postoperative foreign-body reaction.

Levels of heavy metals and trace elements in umbilical cord blood and the risk of adverse pregnancy outcomes: a population-based study

To better understand the relationship between prenatal exposure to heavy metals and trace elements and the risk of adverse pregnancy outcomes, we investigated the status of heavy metals and trace elements level in a Chinese population by collecting umbilical cord blood. Umbilical cord blood heavy metals and trace elements concentrations were determined by inductively coupled plasma-mass spectrometry. No differences with statistical significance in the median arsenic (As), cadmium (Cd), cobalt (Co), chromium (Cr), copper (Cu), manganese (Mn), nickel (Ni), lead (Pb), strontium (Sr), thallium (Tl), vanadium (V), and zinc (Zn) concentrations were observed between the adverse pregnancy outcome group and the reference group. Titanium (Ti) and antimony (Sb) were found at higher levels with statistical significance in the cord blood samples with adverse pregnancy group when compared to the ones in the reference group. The association between Ti levels and the risk of adverse pregnancy outcomes remained significant after adjusting for potential confounding factors, including newborn weight. These results indicated that environmental exposure to Ti may increase the risk of adverse pregnancy outcomes in Chinese women without occupational exposure.

In vitro age dependent response of macrophages to micro and nano titanium dioxide particles

As a result of corrosion, microparticles (MP) and/or nanoparticles (NP) can be released from the metallic implants surface into the bioenvironment. The biological response to these particles depends not only on the physico-chemical properties of the particles but also on host factors, such as age. Macrophages have attracted wide concern in biomedicine. The aim of this investigation was to study the age related biological response of macrophages to TiO2 -MP and NP in vitro. Alveolar macrophages (AM) obtained from young and senescent rats were cultured and exposed to TiO2 -MP and NP. Cell metabolism, superoxide anion (O2 (-) ) and nitric oxide (NO) generation, and cytokine release (IL-6, TNFα, IL-10) were measured. Cell metabolism was not affected by particle exposure. O2 (-) and NO generation increased in a dose dependent manner. A marked increase on IL-6 release was found in the young-AM subpopulation exposed to TiO2 -MP. Conversely, both particle sizes induced a dose dependent release of TNFα in senescent-AM. Only the highest concentration of TiO2 -particles caused a significant increase in IL-10 release in AM-cultures. These observations lend strong support to the suggestion that cellular response of macrophages to TiO2 -particles is age dependent. The biological effect of the particles would seem to be more deleterious in the senescent age-group.

Factors influencing arthrodesis rates in a rabbit posterolateral spine model with iliac crest autograft

PURPOSE

The rabbit posterolateral intertransverse spine arthrodesis model has been widely used to evaluate spinal biologics. However, to date, the validity and reproducibility of performance of iliac crest bone graft, the most common and critical control group, has not been firmly established. We evaluated original research publications that utilized this model, identified which experimental conditions affected fusion rates, and developed an algorithm to predict fusion rates for future study designs.

METHODS

A MEDLINE search was performed for publications through December, 2011 that utilized this model to evaluate fusion rates elicited by iliac crest autograft. All study parameters were recorded, and logistic regression analyses were performed to determine the effects of these variables on fusion rates as determined by either manual palpation or radiographs.

RESULTS

Seventy studies with 959 rabbits in 102 groups met the inclusion criteria. Excluding studies that measured fusion at 4 or fewer weeks or intentionally tried to decrease the fusion rate, the overall fusion rate for autograft was 58.3 ± 16.3 % (mean ± SD) as determined by manual palpation and 66.4 ± 17.8 % by plain radiographs. Regression analysis demonstrated a difference between these outcome measures with a trend towards significance (p = 0.09). Longer time points and larger volumes of autograft resulted in significantly greater reported fusion rates (p < 0.0001 and p < 0.05, respectively). Neither strain, age, weight, nor vertebral level significantly affected fusion rates.

CONCLUSIONS

Although experimental conditions varied across studies, time point evaluation and autograft volume significantly affected fusion rates. Despite some variability demonstrated across certain studies, we demonstrated that when the time point and volume of autograft were controlled for, the iliac crest control group of the rabbit posterolateral spinal arthrodesis model is both reliable and predictably affected by different experimental conditions.

Rods in spinal surgery: a review of the literature

BACKGROUND CONTEXT

Spinal instrumentation has been used for more than five decades. Since the introduction of the Harrington rod in 1962, new rod materials and concepts have been developed. Rigid rod fixation has achieved higher fusion rates than previous methods. Recently, semirigid rod fixation devices have been used for both dynamic stabilization and fusion fixation. Memory rods, which have an interesting ability to return to their pre-bent shape when the temperature increases, are expected to be used for scoliosis correction.

PURPOSE

To review the previous literature regarding biofunctionality and biocompatibility of rods in spinal surgery.

CONCLUSION

The properties of each type of rod need to be taken into consideration when performing spinal instrumentation surgery.

Epidural application of spinal instrumentation particulate wear debris: a comprehensive evaluation of neurotoxicity using an in vivo animal model

Object

The introduction and utilization of motion-preserving implant systems for spinal reconstruction served as the impetus for this basic scientific investigation. The effect of unintended wear particulate debris resulting from micromotion at spinal implant interconnections and bearing surfaces remains a clinical concern. Using an in vivo rabbit model, the current study quantified the neural and systemic histopathological responses following epidural application of 11 different types of medical-grade particulate wear debris produced from spinal instrumentation.

Methods

A total of 120 New Zealand White rabbits were equally randomized into 12 groups based on implant treatment: 1) sham (control), 2) stainless steel, 3) titanium alloy, 4) cobalt chromium alloy, 5) ultra–high molecular weight polyethylene (UHMWPe), 6) ceramic, 7) polytetrafluoroethylene, 8) polycarbonate urethane, 9) silicone, 10) polyethylene terephthalate, 11) polyester, and 12) polyetheretherketone. The surgical procedure consisted of a midline posterior approach followed by resection of the L-6 spinous process and L5–6 ligamentum flavum, permitting interlaminar exposure of the dural sac. Four milligrams of the appropriate treatment material (Groups 2–12) was then implanted onto the dura in a dry, sterile format. All particles (average size range 0.1–50 μm in diameter) were verified to be endotoxin free prior to implantation. Five animals from each treatment group were sacrificed at 3 months and 5 were sacrificed at 6 months postoperatively. Postmortem analysis included epidural cultures and histopathological assessment of local and systemic tissue samples. Immunocytochemical analysis of the spinal cord and overlying epidural fibrosis quantified the extent of proinflammatory cytokines (tumor necrosis factor–α, tumor necrosis factor–β, interleukin [IL]–1α, IL-1β, and IL-6) and activated macrophages.

Results

Epidural cultures were negative for nearly all cases, and there was no evidence of particulate debris or significant histopathological changes in the systemic tissues. Gross histopathological examination demonstrated increased levels of epidural fibrosis in the experimental treatment groups compared with the control group. Histopathological evaluation of the epidural fibrous tissues showed evidence of a histiocytic reaction containing phagocytized inert particles and foci of local inflammatory reactions. At 3 months, immunohistochemical examination of the spinal cord and epidural tissues demonstrated upregulation of IL-6 in the groups in which metallic and UHMWPe debris were implanted (p < 0.05), while macrophage activity levels were greatest in the stainless-steel and UHMWPe groups (p < 0.05). By 6 months, the levels of activated cytokines and macrophages in nearly all experimental cases were downregulated and not significantly different from those of the operative controls (p > 0.05). The spinal cord had no evidence of lesions or neuropathology. However, multiple treatments in the metallic groups exhibited a mild, chronic macrophage response to particulate debris, which had diffused intrathecally.

Conclusions

Epidural application of spinal instrumentation particulate wear debris elicits a chronic histiocytic reaction localized primarily within the epidural fibrosis. Particles have the capacity to diffuse intrathecally, eliciting a transient upregulation in macrophage/cytokine activity response within the epidural fibrosis. Overall, based on the time periods evaluated, there was no evidence of an acute neural or systemic histopathological response to the materials included in the current project.

Assessment of epidural versus intradiscal biocompatibility of PEEK implant debris: an in vivo rabbit model

PURPOSE

To understand the relative histopathological effects of PEEK particulate debris when applied within the epidural versus the intervertebral disc space. We hypothesized that due to the avascular nature of the intervertebral disc acting as a barrier to immune cells, the intradiscal response would be less than the epidural response.

METHODS

The inflammatory effects of clinically relevant doses (3 mg/5-kg rabbit) and sizes (1.15 µm diameter) of PEEK implant debris were assed when placed dry on epidural and intradiscal tissues in an in vivo rabbit model. The size of the particulate was based on wear particulate analysis of wear debris generated from simulator wear testing of PEEK spinal disc arthroplasty devices. Local and systemic gross histology was evaluated at the 3- and 6-month time points. Quantitative immunohistochemistry of local tissues was used to quantify the common inflammatory mediators TNF-α, IL-1β, and IL-6.

RESULTS

Both treatments did not alter the normal appearance of the dura mater and vascular structures; however, limited epidural fibrosis was observed. Epidural challenge of PEEK particles resulted in a significant (30 %) increase (p < 0.007) in TNF-α and IL-1β at both 3 and 6 months compared to that of controls, and IL-6 at 6 months (p < 0.0001). Intradiscal challenge of PEEK particles resulted in a significant increase in IL-1β, IL-6 and TNF-α at 6-months post-challenge (p ≤ 0.03). However, overall there were only moderate increases in the relative amount of these cytokines when compared with surgical controls (10-20 %). In contrast, epidural challenge resulted in a 50-100 % increase.

CONCLUSIONS

The results of this study are similar to past investigations of PEEK, whose results have not been shown to elicit an aggressive immune response. The degree to which these results will translate to the clinical environment remains to be established, but the pattern of subtle elevations in inflammatory cytokines indicated both a mild persistence of responses to PEEK debris, and that intradiscal implant debris will likely result in less inflammation than epidural implant debris.

Serum titanium, niobium, and aluminum levels after instrumented spinal arthrodesis in children

STUDY DESIGN

A prospective cohort study.

OBJECTIVE

To determine serum titanium, niobium, and aluminum levels in pediatric patients within the first postoperative year after instrumented spinal arthrodesis.

SUMMARY OF BACKGROUND DATA

Instrumented spinal arthrodesis is a common procedure to correct scoliosis and kyphosis. Titanium-based instrumentation is increasingly favored due to enhanced biomechanical properties, but concerns have arisen regarding metal debris release and the potential for local and systemic complications.

METHODS

The pattern of systemic metal release over time was evaluated by measuring serum titanium, niobium, and aluminum levels preoperatively and 1 week, 1 month, 6 months, and 12 months after instrumented spinal arthrodesis using a titanium alloy. Serum metal levels were measured using high-resolution inductively coupled plasma mass spectrometry.

RESULTS

Thirty-two patients were included in the study group. Mean age at surgery was 14.7 years. Preoperative and postoperative concentrations of serum titanium and niobium were significantly different (P = 0.0001). Median postoperative serum concentrations of titanium and niobium were elevated 2.4- and 5.9-fold above the normal range respectively with 95% and 99% of samples elevated postoperatively. A significant and rapid rise in serum titanium and niobium levels was observed within the first postoperative week, after which elevated serum levels persisted up to 12 months.

CONCLUSION

We report abnormally elevated serum titanium and niobium levels in patients with titanium-based spinal instrumentation up to 12 months. The long-term systemic consequences of debris generated by wear and corrosion of spinal instrumentation is unclear but concerning, particularly as these implants inserted into the pediatric population may remain in situ for beyond 6 decades.

Aseptic loosening of pedicle screw as a result of metal wear debris in a pediatric patient

STUDY DESIGN

This is a case report.

OBJECTIVE

To report a case of soft-tissue reaction to wear debris and osteolysis around a pedicle screw after posterior spine fusion in a pediatric patient.

SUMMARY OF BACKGROUND DATA

Posterior spine fusion with instrumentation is a standard procedure for stabilization and curve correction in patients with scoliosis. Late operative site pain accounts for the highest frequency of reoperation. Debris accumulation for steel and titanium constructs occurs at the pedicle screw-rod junction. Cellular reaction to metal wear may be responsible for osteolysis and aseptic loosening around spinal implants.

METHODS

A 14-year-old male patient with neurofibromatosis and right thoracic scoliosis of 50° underwent posterior spine fusion from T2 to T10. The postoperative course was complicated by continuous pain, and imaging studies demonstrated hardware failure, requiring a revision and subsequent development of a perihilar opacity of unknown origin. Further studies demonstrated hypermobility with adjacent soft-tissue reactivity and inflammation surrounding the right T5 transpedicle screw.

RESULTS

After hardware removal, the patient's recovery was uneventful. Six months later, a repeated computed tomographic scan demonstrated resolution of the previously described soft-tissue mass and a satisfactory fusion of the thoracic spine.

CONCLUSION

Metal wear debris can form in pediatric patients during the healing process after spinal fusions or when pseudarthrosis is present. Clinically, this manifests as back pain with a possible aseptic inflammatory abscess. Hardware removal can achieve resolution of symptoms and regression of inflammation.

Erythropoietin augments bone formation in a rabbit posterolateral spinal fusion model

We tested the hypothesis that erythropoietin (EPO) enhances bone formation after posterolateral spinal fusion (PLF) in a rabbit model. Thirty-four adult rabbits underwent posterolateral intertransverse arthrodesis at the L5-L6 level using 2.0 g autograft per side. The animals were randomly divided into two groups receiving subcutaneous daily injections of either EPO or saline for 20 days. Treatment commenced 2 days preoperatively. Hemoglobin was monitored at baseline and 2, 4, and 6 weeks after fusion surgery. After euthanasia 6 weeks postoperatively, manual palpation, radiographic, and histomorphometric examinations were performed. Bone volume of the fusion mass was estimated by CT after 6 weeks. EPO increased bone fusion volume to 3.85 ccm (3.66-4.05) compared with 3.26 ccm (2.97-3.55) in the control group (p<0.01). EPO treatment improved vascularization of the fusion mass and increased hemoglobin levels (p<0.01). Fusion rate tended to be higher in the EPO group based on manual palpation, CT, and radiographic examinations. For the first time EPO has shown to augment bone formation after autograft PLF in a rabbit model. Increased vascularization provides a partial explanation for the efficacy of EPO as a bone autograft enhancer.

Quantifying subtle but persistent peri-spine inflammation in vivo to submicron cobalt-chromium alloy particles

PURPOSE

We evaluated the consequences of cobalt-chromium alloy (CoCr) wear debris challenge in the peri-spine region to determine the inflammation and toxicity associated with submicron particulates of CoCr-alloy and nickel on the peri-spine.

METHODS

The lumbar epidural spaces of (n = 50) New Zealand white rabbits were challenged with: 2.5 mg CoCr, 5.0 mg CoCr, 10.0 mg CoCr, a positive control (20.0 mg of nickel) and a negative control (ISOVUE-M-300). The CoCr-alloy and Ni particles had a mean diameter of 0.2 and 0.6 μm, respectively. Five rabbits per dose group were studied at 12 and 24 weeks. Local and distant tissues were analyzed histologically and quantitatively analyzed immunohistochemically (TNF-α and IL-6).

RESULTS

Histologically, wear particles were observed in all animals. There was no evidence of toxicity or local irritation noted during macroscopic observations in any CoCr-dosed animals. However, Ni-treated control animals experienced bilateral hind leg paralysis and were euthanized at Day 2. Histopathology of the Ni particle-treated group revealed severe neuropathy. Quantitative immunohistochemistry demonstrated a CoCr-alloy dose-dependent increase in cytokines (IL-6, TNF-α, p < 0.05) at 12 and 24 weeks.

CONCLUSIONS

Subtle peri-spine inflammation associated with CoCr-alloy implant particles was dose dependent and persistent. Neuropathy can be induced by highly reactive Ni particles. This suggests peri-spine challenge with CoCr-alloy implant debris (e.g., TDA) is consistent with past reports using titanium alloy particles, i.e., mild persistent inflammation.

Titanium dioxide nanoparticles induced cytotoxicity, oxidative stress and DNA damage in human amnion epithelial (WISH) cells

Titanium dioxide nanoparticles (TiO(2)-NPs) induced cytotoxicity and DNA damage have been investigated using human amnion epithelial (WISH) cells, as an in vitro model for nanotoxicity assessment. Crystalline, polyhedral rutile TiO(2)-NPs were synthesized and characterized using X-ray diffraction (XRD), UV-Visible spectroscopy, Fourier transform infra red (FTIR) spectroscopy, and transmission electron microscopic (TEM) analyses. The neutral red uptake (NRU) and [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] (MTT) assays revealed the concentration dependent cytotoxic effects of TiO(2)-NPs (30.6nm) in concentration range of 0.625-10μg/ml. Cells exposed to TiO(2)-NPs (10μg/ml) exhibited significant reduction (46.3% and 34.6%; p<0.05) in catalase activity and glutathione (GSH) level, respectively. Treated cells showed 1.87-fold increase in intracellular reactive oxygen species (ROS) generation and 7.3% (p<0.01) increase in G(2)/M cell cycle arrest, as compared to the untreated control. TiO(2)-NPs treated cells also demonstrated the formation of DNA double strand breaks with 14.6-fold (p<0.05) increase in Olive tail moment (OTM) value at 20μg/ml concentration, vis-à-vis untreated control, under neutral comet assay conditions. Thus, the reduction in cell viability, morphological alterations, compromised antioxidant system, intracellular ROS production, and significant DNA damage in TiO(2)-NPs exposed cells signify the potential of these NPs to induce cyto- and genotoxicity in cultured WISH cells.

Postoperative spinal infection mimicking systemic vasculitis with titanium-spinal implants

BACKGROUND

Secondary systemic vasculitis after posterior spinal fusion surgery is rare. It is usually related to over-reaction of immune-system, to genetic factors, toxicity, infection or metal allergies.

CASE DESCRIPTION

A 14 year-old girl with a history of extended posterior spinal fusion due to idiopathic scoliosis presented to our department with diffuse erythema and nephritis (macroscopic hemuresis and proteinuria) 5 months post surgery. The surgical trauma had no signs of inflammation or infection. The blood markers ESR and CRP were increased. Skin tests were positive for nickel allergy, which is a content of titanium alloy. The patient received corticosteroids systematically (hydrocortisone 10 mg) for 6 months, leading to total recess of skin and systemic reaction. However, a palpable mass close to the surgical wound raised the suspicion of a late infection. The patient had a second surgery consisting of surgical debridement and one stage revision of posterior spinal instrumentation. Intraoperative cultures were positive to Staphylococcus aureus. Intravenous antibiotics were administered. The patient is now free of symptoms 24 months post revision surgery without any signs of recurrence of either vasculitis or infection.

LITERATURE REVIEW

Systemic vasculitis after spinal surgery is exceptionally rare. Causative factors are broad and sometimes controversial. In general, it is associated with allergy to metal ions. This is usually addressed with metal on metal total hip bearings. In spinal surgery, titanium implants are considered to be inert and only few reports have presented cases with systemic vasculitides. Therefore, other etiologies of immune over-reaction should always be considered, such as drug toxicity, infection, or genetic predisposition.

PURPOSES AND CLINICAL RELEVANCE

Our purpose was to highlight the difficulties during the diagnostic work-up for systemic vasculitis and management in cases of posterior spinal surgery.

Index radial collateral ligament repair with titanium mini-suture anchor: osteolysis complication of an underreported injury

We are reporting on a case of an index radial collateral ligament tear repaired with a titanium Mitek bone suture anchor. The development of cystic radiographic changes and increased pain and weakness led to suture anchor removal at 10 months post-repair. Periprosthetic osteolysis due to titanium-induced osteoclastogenesis and micromotion was suspected to be the cause. This case report provides a dual focus by stressing the importance of the diagnosis and treatment of this underreported ligament tear and highlighting our osteolysis complication via the mechanism of titanium-induced osteoclastogenesis for future therapeutic preventive measures.

Complications of Bryan cervical disc replacement

The primary goals of cervical disc replacement are to avoid fusion in the affected segment, maintain the mobility and function of the involved cervical segments, allow patients to quickly return to routine activities and reduce or eliminate adjacent-segment disease. A large number of patients have already undergone, and more and more patients will in the future undergo, cervical disc replacement. The cervical device which best preserves movement, and has therefore been the device of choice, has been the Bryan cervical disc. Although a safe surgical technique has been demonstrated and favorable results of using the Bryan disc reported, some complications have also accompanied this arthroplasty. Complications of Bryan cervical disc replacement include those related to the operative approach and decompression process, loosening and failure of the device, postoperative kyphosis, heterotopic ossification, and loss of movement due to spontaneous fusion. In order to avoid these complications, strict patient selection criteria and a meticulous knowledge of anatomy are necessary.

A review of the biologic effects of spine implant debris: Fact from fiction

BACKGROUND

Biologic-reactivity to implant-debris is the primary determinant of long-term clinical performance. The following reviews: 1) the physical aspects of spinal-implant debris and 2) the local and systemic biologic responses to implant debris.

METHODS

Methods included are: 1) gravimetric wear analysis; 2) SEM and LALLS; 3) metal-ion analysis; 4) ELISA, toxicity testing, patch testing; and 5) metal-lymphocyte transformation testing (metal-LTT).

RESULTS

Wear and corrosion of spine-implants produce particles and ions. Particles (0.01-1000 μm) are generally submicron ( <1 µm). Wear rates of metal-on-polymer and metal-on-metal disc arthroplasties are approximately 2-20 and 1 mm(3)/yr, respectively. Metal-on-metal total disc replacement components have significant increases in circulating metal (less than 10-fold that of controls at 4 ppb-Co and 3 ppb-Cr or ng/mL). Debris reactivity is local and systemic. Local inflammation is caused primarily by ingestion of debris by local macrophages, which produce pro-inflammatory cytokines TNFα, IL-1β, IL-6, and PGE2. Systemic responses associated with implant-debris have been limited to hypersensitivity reactions. Elevated amounts of in the liver, spleen, etc of patients with failed TJA have not been associated with remote toxicological or carcinogenic pathology to date. Implant debris are differentially bioreactive. Greater numbers are pro-inflammatory; the smaller-sized debris are more bioreactive by virtue of their greater numbers (dose) for a given amount of implant mass loss (one 100-μm-diameter particle is equivalent in mass to 1 million 1-μm-diameter particles). Elongated particles are pro-inflammatory (ie, aspect ratio of greater than 3). Metal particles are more proinflammatory than polymers, ceteris paribus.

CONCLUSION

Spinal arthroplasty designs have been in use for more than 20 years internationally; therefore, concerns about neuropathology, toxicity, and carcinogenicity are mitigated. Debris-induced inflammation still depends on the individual and the type of debris. The consequence of debris-induced inflammation is continued; vigilance by physicians is recommended monitoring of spinal implants using physical exams and testing of metal content and bioreactivity, as is planning for the likelihood of revision in younger individuals.

Cervical spinal disc replacement

Cervical spinal disc replacement is used in the management of degenerative cervical disc disease in an attempt to preserve cervical spinal movement and to prevent adjacent disc overload and subsequent degeneration. A large number of patients have undergone cervical spinal disc replacement, but the effectiveness of these implants is still uncertain. In most instances, degenerative change at adjacent levels represents the physiological progression of the natural history of the arthritic disc, and is unrelated to the surgeon. Complications of cervical disc replacement include loss of movement from periprosthetic ankylosis and ossification, neurological deficit, loosening and failure of the device, and worsening of any cervical kyphosis. Strict selection criteria and adherence to scientific evidence are necessary. Only prospective, randomised clinical trials with long-term follow-up will establish any real advantage of cervical spinal disc replacement over fusion.

Induction of cell death by TiO2 nanoparticles: studies on a human monoblastoid cell line

The cellular responses to degradation products from titanium (Ti) implants are important indicators for the biocompatibility of these widely used implantable medical devices. The potential toxicity of nanoparticulate matter released from implants has been scarcely studied. The aim of this study was to investigate the potential of TiO2 nanoparticles to induce modifications characteristic for death by apoptosis and/or necrosis in U937 human monoblastoid cells. Suspensions of TiO2 nanoparticles with a diameter <100nm were prepared in RPMI cell culture medium at concentrations that covered a range (0.005-4mg/ml) corresponding to concentrations found in blood, plasma, or in tissues surrounding Ti implants. The cells were exposed to the nanoparticulate suspensions for 24 and 48h and the responses were evaluated by flow cytometry and transmission electron microscopy. TiO2 nanoparticles induced both apoptotic and necrotic modifications in U937 cells.