Metal-on-metal total hip arthroplasty: the concerns

Clinical, functional and radiographic long-term follow-up (7-12 years) of Birmingham Hip Resurfacing, including metal ions evaluation: a single surgeon series

Hip resurfacing arthroplasty (HRA) has been advocated as an attractive therapy for a younger, more demanding patient population with debilitating hip osteoarthritis. Controversies surrounding metal-on-metal (MoM) hip resurfacing have, however, led to a significant decline in the popularity of the HRA. Despite this, substantial evidence supports the use of specific implants in a selected group of patients. This is a continued retrospective analysis of a single surgeon series of the Birmingham Hip Resurfacing (BHR). Initial medium-term analysis was done in 2011 and published by Van der Bracht et al.13. This analysis includes a long-term follow-up of 7 to 12 years, including functional scoring (HHS, HOOS and UCLA activity score), metal ion evaluation and survival analysis. Failure was defined as revision for any cause. A total of 267 resurfacing procedures with the BHR were included in 247 patients. We had a mean follow-up of 8.3 years. Overall survival at ten years was 94.8%(97.2% for males and 90.1% for females). There was a statistically significant increase in mean HHS score at follow-up (56.03 - IQR 47-65 to 96.07 - IQR 96-100). Elevated metal ions were correlated with a statistically significant increase in the probability of complications. This cohort study further proved that hip resurfacing arthroplasty with the Birmingham Hip Resurfacing implant provides a good alternative to conventional total hip arthroplasty in young patients. There was a significant increase in functional scores at follow-up. There is further evidence of less favorable outcomes in female patients.

Total Hip Arthroplasty: An Update on Navigation, Robotics, and Contemporary Advancements

While total hip arthroplasty (THA) remains effective for improvement of pain and function in patients with osteoarthritis and avascular necrosis, there remain areas of continued pursuit of excellence, including decreasing rates of dislocation, leg length discrepancy, implant loosening, and infection. This review article covers several bearing surfaces and articulations, computer-assisted navigation and robotic technology, and minimally invasive surgical approaches that have sought to improve such outcomes. Perhaps the most significant improvement to THA implant longevity has been the broad adoption of highly cross-linked polyethylene, with low wear rates. Similarly, navigation and robotic technology has proven to more reproducibly achieve intraoperative component positioning, which has demonstrated clinical benefit with decreased risk of dislocation in a number of studies. Given the projected increase in THA over the coming decades, continued investigation of effective incorporation of technology, soft tissue-sparing approaches, and durable implants is imperative to continued pursuit of improved outcomes in THA.

An overview of the tribological and mechanical properties of PEEK and CFR-PEEK for use in total joint replacements

Poly-ether-ether-ketone (PEEK) and PEEK composites are outstanding candidates for biomedical applications, such as orthopedic devices, where biocompatibility and modulus match with surrounding tissue are requisite for long-term success. The mechanical properties can be optimized by incorporating fillers such as continuous and chopped carbon fibers. While much is known about the mechanical and tribological behavior of PEEK composites, there are few articles that summarize the viability of using PEEK reinforced with carbon fibers in orthopedic implants. This paper reviews biocompatibility, tribological, and mechanical studies on PEEK and their composites with carbon fibers, notably PEEK reinforced with polyacrylonitrile (PAN)-based carbon fibers and PEEK reinforced with pitch-based carbon fibers, for application in orthopedics and total joint replacements (TJRs). The main objectives of this review are two-fold. Firstly, this paper aims to assist designers in making informed decisions on the suitability of using PEEK and PEEK composites in orthopedic applications; as it is not well understood how these materials perform on the whole in orthopedics and TJRs. Secondly, this paper aims to serve as a centralized paper in which researchers can gain information on the tribological and mechanical advancements of PEEK and PEEK composites.

Hypersensitivity and lymphocyte activation after total hip arthroplasty

In the last decades total hip arthroplasty (THA) has become a standard procedure with many benefits but also a few still unsolved complications, which can lead to surgical revision in 19-23% of cases. Thus, aseptic loosening and metal hypersensitivity remain challenges. The phenomenon of wear debris causes chronic inflammation, which produces osteolysis and aseptic loosening. Wear debris promotes osteoclast production and inhibits osteoblasts by secretion of pro-inflammatory cytokines. Micro-abrasions can be induced by abrasive, adhesive and fatigue wear and cause a liberation of metal ions, which lead to another immune response elicited mostly by macrophages. Another reaction in the neocapsule can be a type IV hypersensitivity reaction to various alloys, containing metals such as nickel, cobalt and chromium. Patch testing and the lymphocyte transformation test (LTT) are not the best diagnostic possibilities to exclude a postoperative hypersensitivity reaction, because of the different alignment of the epicutaneous cells compared to the periprosthetic deep tissue. This hypersensitivity reaction is mostly induced by cytokines, which are secreted by macrophages rather than lymphocytes. In cell cultures and in animal studies, multipotent mesenchymal stem cells (MSC) have been shown to play a role in improving initial implant integration, to limit periprosthetic osteolysis and also to reconstitute peri-implant bone stock during implant revision. Thus, MSC might be used in the future to prolong the durability of THA. A better understanding of the interactions between primary chronic inflammation, corrosion, osteolysis and hypersensitivity is mandatory to develop new therapeutic strategies, aiming at the reduction of the incidence of implant failures. In this article the underlying immunological mechanisms to aseptic loosening are presented.

Midterm results of the Birmingham hip resurfacing: a single-surgeon series

INTRODUCTION

Birmingham hip resurfacing (BHR) is readily used as alternative to total hip replacement in younger patients. The current study aims to compare outcomes in terms of adverse local tissue reactions (ALTR), elevated metal ion levels and survival rates between low-risk (femoral component size ≥ 48 mm) and high-risk (femoral component size < 48 mm) BHR patients at a minimum 5-year follow-up (FU).

MATERIALS AND METHODS

We report the minimum 5-year, single surgeon outcome results of 183 BHRs, performed between 2007 and 2012. 154 patients, 18 women (20 hips) and 136 men (163 hips) were included in the study. Patients were grouped in 149 low-risk cases (femoral component size ≥ 48 mm) and in 34 high-risk cases (18 female/12 male) patients with a femoral head size < 48 mm).

RESULTS

At a minimum of 5-years FU time, 91% of the patients were available for FU. The overall survival rate was 91.8%. There were five revisions (survival rate 96.6%) in the low-risk group and ten revisions (survival rate 70.6%) in the high-risk group. In the low-risk group, six patients (6.5%) showed elevated metal ion levels (> 7 μg/l), compared to five patients (20.8%) in the high risk-group (p = 0.03).

CONCLUSION

Including the surgeon's initial learning curve, the BHR shows very good mid-term survival rates in the low-risk group but should, as previously demonstrated, not be considered for patients with less than 48 mm femoral head size.

LEVEL OF EVIDENCE

Level III: retrospective cohort study.

A systematic review of metal ion concentrations following instrumented spinal fusion

PURPOSE

Metallic spinal implants undergo wear and corrosion which liberates ionic or particulate metal debris. The purpose of this study was to identify and review studies that report the concentration of metal ions following multi-level spinal fusion and to evaluate the impact on clinical outcomes.

METHODS

Databases (PubMed, EBSCO MEDLINE) were searched up to August 2019 for studies in English-language assessing metal ion levels [chromium (Cr), titanium (Ti), nickel (Ni)] in whole blood, serum, or plasma after spinal fusion using a specific search string. Study, patient, and implant characteristics, method of analysis, metal ion concentration, as well as clinical and radiographic results was extracted.

RESULTS

The systematic search yielded 18 studies encompassing 653 patients. 9 studies reported Ti ions, eight reported Cr, and six reported Ni. Ti levels were elevated compared to controls/reference range/preoperative baseline in seven studies with the other two reporting no difference. Cr levels were elevated compared to controls/reference range in seven studies with one reporting no difference. Ni levels showed no difference from controls/reference range in four studies with one reporting above normal and another elevated compared to controls. Radiographic evidence of corrosion, implant failure, pseudarthrosis, revision surgery and adverse reaction reporting was highly variable.

CONCLUSION

Metal ions are elevated after instrumented spinal fusion; notably Cr levels from stainless steel implants and Ti from titanium implants. The association between clinical and radiographic outcomes remain uncertain but is concerning. Further research with standardized reporting over longer follow-up periods is indicated to evaluate the clinical impact and minimizing risk.

Quality, but not quantity of physical activity is associated with metal ion concentrations in unilateral hip resurfacing

Little is known about the influence of physical activity (PA) on metal ion concentrations in subjects with metal-on-metal hip arthroplasty. Implant wear is thought to be a function of use and thus of patient activity levels. It is hypothesized that daily habitual PA of patients with hip resurfacing arthroplasty (HRA) is associated with metal ion concentrations. Therefore a study was conducted in patients with a unilateral HRA at 10-years follow-up. Blood metal ion concentrations were determined. An acceleration-based activity monitor was used to measure PA in daily life. The cohort consisted of 12 males (75%) and 4 females (25%) with a median age at surgery of 55.5 ± 9.7 years [43.0-67.9] and a median follow-up of 9.9 ± 1.0 years [9.1-10.9]. The median cobalt and chromium ion concentrations were 25 ± 13 and 38 ± 28 nmol/L. A significant association between sit-stand transfers and high-intensity peaks with cobalt ion concentrations were found. Regarding PA and metal ion concentrations as a proxy of wear in HRA, specific activities like transfers or qualitative aspects of activity behavior like intensity, seem to matter more than the quantity of low-intensity activities like walking or cycling. This suggests that patients may safely engage in such activities to achieve important general health benefits and quality of life.

Does the Femoral Head Size in Hip Arthroplasty Influence Lower Body Movements during Squats, Gait and Stair Walking? A Clinical Pilot Study Based on Wearable Motion Sensors

A hip prosthesis design with larger femoral head size may improve functional outcomes compared to the conventional total hip arthroplasty (THA) design. Our aim was to compare the range of motion (RoM) in lower body joints during squats, gait and stair walking using a wearable movement analysis system based on inertial measurement units (IMUs) in three age-matched male groups: 6 males with a conventional THA (THAC), 9 with a large femoral head (LFH) design, and 8 hip- and knee-asymptomatic controls (CTRL). We hypothesized that the LFH design would allow a greater hip RoM, providing movement patterns more like CTRL, and a larger side difference in hip RoM in THAC when compared to LFH and controls. IMUs were attached to the pelvis, thighs and shanks during five trials of squats, gait, and stair ascending/descending performed at self-selected speed. THAC and LFH participants completed the Hip dysfunction and Osteoarthritis Outcome Score (HOOS). The results showed a larger hip RoM during squats in LFH compared to THAC. Side differences in LFH and THAC groups (operated vs. non-operated side) indicated that movement function was not fully recovered in either group, further corroborated by non-maximal mean HOOS scores (LFH: 83 ± 13, THAC: 84 ± 19 groups, vs. normal function 100). The IMU system may have the potential to enhance clinical movement evaluations as an adjunct to clinical scales.

Total Hip Arthroplasty Bearing Surface Trends in the United States From 2007 to 2014: The Rise of Ceramic on Polyethylene

BACKGROUND

Wear of the bearing surface is a critical element in determining the longevity of a total hip arthroplasty (THA). Over the past decade, concerns related to modern metal-on-metal (MoM) bearings and corrosion at the femoral head-neck interface have influenced surgeon selection of bearing surfaces. The purpose of this study is to analyze trends in THA bearing surface selection from 2007 through 2014 using a large national database.

METHODS

The Nationwide Inpatient Sample database was used to extract bearing surface data from patients who underwent a primary THA between 2007 and 2014. Patients were grouped by bearing surface type: metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), MoM, and ceramic-on-ceramic (CoC) bearings. Descriptive statistics were employed to describe trends. Univariate and multivariate analyses were performed to identify differences between bearing surface groups.

RESULTS

During the study period, 2,460,640 THA discharges were identified, of which 1,059,825 (43.1%) had bearing surface data. A total of 496,713 (46.9%) MoP, 307,907 (29.1%) CoP, 210,381 (19.9%) MoM, and 44,823 (4.2%) CoC cases were identified. MoM utilization peaked in 2008 representing 40.1% of THAs implanted that year and steadily declined to 4.0% in 2014. From 2007 to 2014, the use of CoP bearing surfaces increased from 11.1% of cases in 2007 to 50.8% of cases in 2014. In 2014, CoP utilization surpassed MoP which represented 42.1% of bearing surfaces that year.

CONCLUSION

During the study period, MoM bearing surfaces decreased precipitously, while CoP surpassed MoP as the most popular bearing surface used in a THA.

Femoral offset found not to affect metal ion levels in metal-on-metal total hip arthroplasty

BACKGROUND

Failure to restore femoral offset in metal on polyethylene total hip arthroplasty (THA) causes polyethylene wear and aseptic loosening. To our knowledge, no study to date has investigated the relationship between femoral offset and wear in metal-on-metal (MOM) THA.

AIMS

In this study, we investigated the relationship between femoral offset and wear by measuring circulating metal ion levels in MOM THA.

METHODS

In this retrospective study, we identified patients who had undergone MOM THA with the ASR XL system (DePuy International Ltd., Leeds, UK). Femoral offset was measured using anteroposterior radiographs, and circulating metal ion levels (cobalt and chromium) were recorded.

RESULTS

In total, 95 patients were included (68 males and 27 females). The mean age at the time of surgery was 64.9. Mean time from surgery to blood sampling was 15.4 months. No statistically significant relationship was found between femoral offset and cobalt (p = 0.313) or chromium (p = 0.401) ions.

CONCLUSION

It is known that failure to restore femoral offset during THA can lead to high rates of wear in metal-on-polyethylene articulations. In our study, no statistically significant relationship was found between femoral offset and serum cobalt or chromium ions. This study adds to the information available to surgeons regarding factors that increase wear in metal-on-metal total hip arthroplasty.

Environmental Factors Impacting Bone-Relevant Chemokines

Chemokines play an important role in normal bone physiology and the pathophysiology of many bone diseases. The recent increased focus on the individual roles of this class of proteins in the context of bone has shown that members of the two major chemokine subfamilies-CC and CXC-support or promote the formation of new bone and the remodeling of existing bone in response to a myriad of stimuli. These chemotactic molecules are crucial in orchestrating appropriate cellular homing, osteoblastogenesis, and osteoclastogenesis during normal bone repair. Bone healing is a complex cascade of carefully regulated processes, including inflammation, progenitor cell recruitment, differentiation, and remodeling. The extensive role of chemokines in these processes and the known links between environmental contaminants and chemokine expression/activity leaves ample opportunity for disruption of bone healing by environmental factors. However, despite increased clinical awareness, the potential impact of many of these environmental factors on bone-related chemokines is still ill defined. A great deal of focus has been placed on environmental exposure to various endocrine disruptors (bisphenol A, phthalate esters, etc.), volatile organic compounds, dioxins, and heavy metals, though mainly in other tissues. Awareness of the impact of other less well-studied bone toxicants, such as fluoride, mold and fungal toxins, asbestos, and chlorine, is also reviewed. In many cases, the literature on these toxins in osteogenic models is lacking. However, research focused on their effects in other tissues and cell lines provides clues for where future resources could be best utilized. This review aims to serve as a current and exhaustive resource detailing the known links between several classes of high-interest environmental pollutants and their interaction with the chemokines relevant to bone healing.

The induction of CXCR4 expression in human osteoblast-like cells (MG63) by CoCr particles is regulated by the PLC-DAG-PKC pathway

BACKGROUND

Osteolysis which leads to aseptic loosening of implants is a fundamental problem in joint replacement surgery (arthroplasty) and the leading cause for implant failure and revision surgery. Metal (CoCr) particles separated from implants by wear cause osteolysis and the failure of orthopedic implants, but the molecular mechanism is not clear. The chemokine receptor CXCR4 has been shown to play a pivotal role in periprosthetic osteolysis. The aim of this study was to determine which signal transduction pathway (PLC-DAG-PKC or MAPK/ERK) induces CXCR4 expression in osteoblast-like cells (MG63) cells.

METHODS

MG63 and Jurkat cells were stimulated with different amounts of particles (10⁷ , 10⁶ , and 10⁵ ) for different time periods (30 min to 24 h), in the presence and absence of specific inhibitors (chelerythrine for the PLC-DAG-PKC pathway and PD98059 for the MAPK/ERK pathway). The expression of CXCR4-specific mRNA was determined by real-time polymerase chain reaction (PCR), and the PKC activity was measured by Western Blot using an antibody specific for PKC-related phosphorylation.

RESULTS

Real-time PCR data showed that CXCR4 mRNA expression in MG63 cells induced by CoCr particles was significantly diminished by the PKC-specific inhibitor chelerythrine. This effect was not observed with the MAPK/ERK inhibitor PD98059. The involvement of PKC was also confirmed by an intensified phosphorylation pattern after stimulation with CoCr particles. In Jurkat cells, none of the inhibitors exhibited any effect.

CONCLUSION

The induction of CXCR4-specific mRNA expression in MG63 cells after stimulation with CoCr particles is regulated by the PLC-DAG-PKC pathway and not by the MAPK/ERK pathway. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2326-2332, 2017.

Hip arthroplasty for treatment of advanced osteonecrosis: comprehensive review of implant options, outcomes and complications

Surgical treatment for late stage (post-collapse) osteonecrosis of the femoral head is controversial. In these situations, the outcome of joint preservation procedures is poor. There are several arthroplasty options for late-stage disease. The clinical outcomes of hemiarthroplasty and hemiresurfacing are unpredictable because of progressive acetabular cartilage degeneration. Total hip resurfacing may be associated with further vascular insult to the femoral head and early failure of the implant. Total hip replacement with metal-on-conventional polyethylene bearing surfaces has been the gold standard, but implant survivorship is limited in young active patients due to wear and osteolysis. Newer alternative bearing surfaces may have improved wear characteristics, but their durability must be confirmed in longer-term studies.

Birmingham hip resurfacing in patients who are seventy years of age or older

There is no published literature to support mid to long term results of hip resurfacing (HR) arthroplasty in patients over the age of 70 years. The purpose of our study was to evaluate the function HR in this age group (70 or older at the time of surgery) at medium to long term follow-up. Between July 1997 and November 2002, the Oswestry Outcome Centre independently and prospectively collected data on 5000 Birmingham Hip Resurfacings (BHRs). 106 had been implanted in elderly patients who were 70 years of age or older. The post-operative Harris and Merle D'Aubigné and Postel (MDP) hip scores and causes for revision were used to ascertain function and implant survival. Hip scores for the older BHR patients were compared with those from younger patients. The average age at surgery of the elderly BHR cohort was 73.2 years (range, 70.0 to 87.9 years) with a mean follow-up of 7.1 years (range, 0.5 to 10.9 years). Four patients had a femoral neck fracture and required conversion to a conventional total hip replacement. There were no patients lost to follow-up and no dislocations in this series. The median Harris hip score (HHS) was significantly better in the younger BHR group compared with the elderly BHR group, (96 vs. 94 p=0.008). There was no significant difference in recovery rates after surgery. There was a significantly higher rate of revision in women than men among the elderly patients (male= 1 of 65 (1.5%); women = 3 of 19 (15.8%), p=0.03). At latest follow-up the elderly patients continued to function well when compared with the younger BHR patients. There was a high mid to long term success rate after HR in patients who were 70 years of age or older, without the failure burden possibly anticipated. Elderly patients had a poorer functional outcome, but a difference in HHS of two points may be of only minor clinical significance.

Crowe Type I and II DDH managed by large diameter metal-on-metal total hip arthroplasty

Large bearing metal-on-metal (MOM) total hip arthroplasty (THA) may offer advantages relating to stability and range of motion in patients with Crowe Type I and II developmental dysplasia of the hip (DDH). The purpose of this study was to provide an analysis of the clinical and radiological results of MOM THA in this context and compare the results with a cohort of patients treated with metal-on-polyethylene (MOP) bearing surfaces. 75 hips in 65 patients were treated with cementless MOM THA using large femoral heads (36-56 mm). The mean age of the patients was 47.4 years (29 to 59) and 54 were female. A group of 47 hips (41 patients) treated with conventional THA (screwed cup-polyethylene insert-28 mm head) was used for comparison. The study group was followed up for a mean of 62.1 months (32 to 76). No difference was found between the two groups in relation to improvement in Harris hip score (HHS) (43.1 to 90.3 points in the study group, 42.6 to 89.5 points in the control group, p>0.05). Although the preoperative range of motion in all planes were similar in both groups, the large head group demonstrated greater motion in all planes postoperatively, which was significant (all p=0.001). Additionally, there was a significant difference between groups in relation to the necessity for acetabular structural graft (8% and 31.9%, respectively; p=0.001). No major complications or adverse reactions to metal debris (ARMD) were observed in the study group. The results of large head MOM THA in young and active patients with DDH are similar to conventional THA at early follow-up, but the former offers the advantages of secure acetabular fixation without screws, greater range of motion, and lower risk of dislocation.

Adverse Reactions to Metal on Metal Are Not Exclusive to Large Heads in Total Hip Arthroplasty

BACKGROUND

There is some suggestion that smaller diameter heads in metal-on-metal total hip arthroplasty (MoM THA) may be less prone to the adverse reactions to metal debris (ARMD) seen with large-diameter heads.

QUESTIONS/PURPOSES

We reviewed our population of patients with small head (≤ 32 mm) MoM THA to determine (1) the frequency of ARMD; (2) potential risk factors for ARMD in this population; and (3) the etiology of revision and Kaplan-Meier survivorship with revision for all causes.

METHODS

Small-diameter head MoM devices were used in 9% (347 of 3753) of primary THAs during the study period (January 1996 to March 2005). We generally used these implants in younger, more active, higher-demand patients. Three hundred hips (258 patients) had MoM THA using a titanium modular acetabular component with a cobalt-chromium tapered insert and were available for review with minimum 2-year followup (mean, 10 years; range, 2-19 years). Complete followup was available in 86% of hips (300 of 347). Clinical records and radiographs were reviewed to determine the frequency and etiology of revision. Kaplan-Meier survivorship analysis was performed.

RESULTS

ARMD frequency was 5% (14 of 300 hips) and represented 70% (14 of 20) of revisions performed. Using multivariate analysis, no variable tested, including height, weight, body mass index, age, cup diameter, cup angle, use of screws, stem diameter, stem type, head diameter, preoperative clinical score, diagnosis, activity level, or sex, was significant as a risk factor for revision. Twenty hips have been revised: two for infection, four for aseptic loosening, and 14 for ARMD. Kaplan-Meier analysis revealed survival free of component revision for all causes was 95% at 10 years (95% confidence interval [CI], 91%-97%), 92% at 15 years (95% CI, 87%-95%), and 72% at 19 years (95% CI, 43%-90%), and survival free of component revision for aseptic causes was 96% at 10 years (95% CI, 92%-98%), 92% at 15 years (95% CI, 88%-95%), and 73% at 19 years (95% CI, 43%-90%).

CONCLUSIONS

The late onset and devastating nature of metal-related failures is concerning with this small-diameter MoM device. Although the liner is modular, it cannot be exchanged and full acetabular revision is required. Patients with all MoM THA devices should be encouraged to return for clinical and radiographic followup, and clinicians should maintain a low threshold to perform a systematic evaluation. Symptomatic patients should undergo thorough investigation and vigilant observation for ARMD.

LEVEL OF EVIDENCE

Level IV, therapeutic study.

Cobalt to Chromium Ratio is Not a Key Marker for Adverse Local Tissue Reaction (ALTR) in Metal on Metal Hips

The diagnosis of adverse local tissue reaction (ALTR) after metal-on-metal total hip arthroplasty (MoMTHA) presents a significant challenge. No single biomarker is specific for ALTR. The purpose of this study was to determine if the ratio of cobalt to chromium ions is useful for diagnosing ALTR in MoMTHA. In 89 bearing-related revision THAs, preoperative cobalt and chromium ion levels were compared to an intraoperative soft tissue damage grading scale. The average cobalt to chromium ratio was 2.96 (0-20). There was no correlation between the tissue scale and the cobalt to chromium ratio (R=0.095; P=0.41). Many variables affecting ion production/excretion mitigate the use of the ion ratio. The cobalt to chromium ratio is not a predictive biomarker for ALTR in MoMTHA.

Metal ion levels and functional results following resurfacing hip arthroplasty versus conventional small-diameter metal-on-metal total hip arthroplasty; a 3 to 5year follow-up of a randomized controlled trial

We present an update of a randomized controlled trial on 71 patients (<65 years) who received either a resurfacing hip arthroplasty (RHA) (n=38) or cementless 28-mm metal-on-metal (MoM) total hip arthroplasty (THA) (n=33). Metal ion levels and functional outcome scores were analyzed with a mean follow-up of 58 months (SD 8.1). No clear shifts in relatively good outcome was encountered between RHA and THA. Metal ion levels appear to equalize between groups after 3 years. Median cobalt and chromium remained below 1.3 μg/L throughout follow-up in both groups. Six revisions were performed, of which three for pseudotumor formation (one THA, two RHA). In conclusion there were no clinical differences between the two groups and metal ion levels were lower than other series remained low, however, pseudotumor formation was not eliminated.

Metallic debris from metal-on-metal total hip arthroplasty regulates periprosthetic tissues

The era of metal-on-metal (MoM) total hip arthroplasty has left the orthopaedic community with valuable insights and lessons on periprosthetic tissue reactions to metallic debris. Various terms have been used to describe the tissue reactions. Sometimes the nomenclature can be confusing. We present a review of the concepts introduced by Willert and Semlitsch in 1977, along with further developments made in the understanding of periprosthetic tissue reactions to metallic debris. We propose that periprosthetic tissue reactions be thought of as (1) gross (metallosis, necrosis, cyst formation and pseudotumour); (2) histological (macrophage-dominated, lymphocyte-dominated or mixed); and (3) molecular (expression of inflammatory mediators and cytokines such as interleukin-6 and tumor necrosis factor-alpha). Taper corrosion and modularity are discussed, along with future research directions to elucidate the antigen-presenting pathways and material-specific biomarkers which may allow early detection and intervention in a patient with adverse periprosthetic tissue reactions to metal wear debris.

Metallic wear debris may regulate CXCR4 expression in vitro and in vivo

CXCR4, the chemokine receptor for CXCL12, also known as SDF-1 (stromal cell derived factor-1), has been shown to play a pivotal role in bone metastasis, inflammatory, and autoimmune conditions but has not been investigated in periprosthetic osteolysis. We co-cultured osteoblast-like cells with increasing concentrations of metallic (Co-35Ni-20Cr-10Mo and Co-28Cr-6Mo) and Co-ions simulating wear debris. Real-time polymerase chain reaction (RT-PCR) and Western blotting were used to quantify gene and protein expression of CXCR4. The expression of tumor necrosis factor-alpha (TNF-α) and the effects of AMD3100 (bicyclam) on both CXCR4 and TNF-α expression among these cells was investigated. RT-PCR showed an increase in CXCR4 mRNA (7.5-fold for MG63 and 4.0-fold for SaOs-2 cells) among cells co-cultured with metal alloy particles. Western blotting showed a time-dependent increase in protein expression of CXCR4. The attempted blockade of CXCR4 by its known competitive receptor agonist AMD3100 led to a significant inhibition TNF-α mRNA expression. Immunohistochemistry showed CXCR4 positivity among patients with failed metal-on-metal hip replacements and radiographic evidence of osteolysis. Our data collectively suggest that the CXCR4 chemokine is upregulated in a dose- and time-dependent manner in the presence of metallic wear debris.

Comparison of synovial fluid, urine, and serum ion levels in metal-on-metal total hip arthroplasty at a minimum follow-up of 18 years

Diagnosis of adverse reactions to metal debris in metal-on-metal hip arthroplasty is a multifactorial process. Systemic ion levels are just one factor in the evaluation and should not be relied upon solely to determine the need for revision surgery. Furthermore, the correlation between cobalt or chromium serum, urine, or synovial fluid levels and adverse local tissue reactions is still incompletely understood. The hypothesis was that elevated serum and urine metal-ion concentrations are associated with elevated local metal-ion concentrations in primary total hip arthroplasties (THA) and with failure of metal-on-metal articulations in the long-term. In our present study, we evaluated these concentrations in 105 cementless THA with metal-on-metal articulating surfaces with small head diameter at a minimum of 18 years postoperatively. Spearman correlation showed a high correlation between the joint fluid aspirate concentration of cobalt and chromium with the serum cobalt (r = 0.81) and chromium level (r = 0.77) in patients with the THA as the only source of metal-ions. In these patients serum metal-ion analysis is a valuable method for screening. In patients with more than one source of metal or renal insufficiency additional investigations, like joint aspirations are an important tool for evaluation of wear and adverse tissue reactions in metal-on-metal THA.

Metal ion levels: how can they help us?

Ion levels have been shown to reliably predict abnormal function of the bearing surface with increased wear, but ion levels should not be used alone as a trigger for when to proceed with revision surgery with metal-metal articulations. Risk stratification strategies help determine which patients should be monitored more closely with serial ion levels, cross-sectional imaging with a MARS MRI, or proceed on to revision. Based on the current data available, an ion level greater than 4.5 ppb (Cr or Co) may serve as a threshold for when abnormal wear is occurring, and is suggested as a trigger for a MARS MRI scan.

On the inflammatory response in metal-on-metal implants

Background

Metal-on-metal implants are a special form of hip endoprostheses that despite many advantages can entail serious complications due to release of wear particles from the implanted material. Metal wear particles presumably activate local host defence mechanisms, which causes a persistent inflammatory response with destruction of bone followed by a loosening of the implant. To better characterize this inflammatory response and to link inflammation to bone degradation, the local generation of proinflammatory and osteoclast-inducing cytokines was analysed, as was systemic T cell activation.

Methods

By quantitative RT-PCR, gene expression of cytokines and markers for T lymphocytes, monocytes/macrophages and osteoclasts, respectively, was analysed in tissue samples obtained intraoperatively during exchange surgery of the loosened implant. Peripheral T cells were characterized by cytofluorometry before surgery and 7 to 10 days thereafter.

Results

At sites of osteolysis, gene expression of cathepsin K, CD14 and CD3 was seen, indicating the generation of osteoclasts, and the presence of monocytes and of T cells, respectively. Also cytokines were highly expressed, including CXCL8, IL-1ß, CXCL2, MRP-14 and CXCL-10. The latter suggest T cell activation, a notion that could be confirmed by detecting a small, though conspicuous population of activated CD4+ cells in the peripheral blood T cells prior to surgery.

Conclusion

Our data support the concept that metallosis is the result of a local inflammatory response, which according to histomorphology and the composition of the cellular infiltrate classifies as an acute phase of a chronic inflammatory disease. The proinflammatory environment, particularly the generation of the osteoclast-inducing cytokines CXCL8 and IL1-ß, promotes bone resorption. Loss of bone results in implant loosening, which then causes the major symptoms of metallosis, pain and reduced range of motion.

The effect of acetabular inclination on metal ion levels following metal-on-metal hip arthroplasty

Acetabular inclination angles have been suggested as a principal determinant of circulating metal ion levels in metal-on-metal hip arthroplasties. We aimed to determine whether inclination angle correlates with ion levels in arthroplasties using the Articular Surface Replacement (ASR) system. Patients undergoing ASR arthroplasties had blood metal ion levels and radiograph analysis performed a mean of 3.2 years after surgery. Inclination angle showed only a weak correlation with cobalt (r=0.21) and chromium (r=0.15) levels. The correlation between inclination angle and cobalt levels was significant only with small femoral components, although it was still weak. Multiple regression showed a complex interaction of factors influencing ion levels but inclination angle accounted for little of this variation. We conclude that the acetabular inclination angle is not a meaningful determinant of metal ion levels in ASR arthroplasties.

Chronic inflammation in biomaterial-induced periprosthetic osteolysis: NF-κB as a therapeutic target

Biomaterial-induced tissue responses in patients with total joint replacement are associated with the generation of wear particles, which may lead to chronic inflammation and local bone destruction (periprosthetic osteolysis). Inflammatory reactions associated with wear particles are mediated by several important signaling pathways, the most important of which involves the transcription factor NF-κB. NF-κB activation is essential for macrophage recruitment and maturation, as well as the production of pro-inflammatory cytokines and chemokines such as TNF-α, IL-1β, IL-6 and MCP1. In addition, NF-κB activation contributes to osteoclast differentiation and maturation via RANK/RANKL signaling, which increases bone destruction and reduces bone formation. Targeting individual downstream cytokines directly (such as TNF-α or IL-1β) may not effectively prevent wear particle induced osteolysis. A more logical upstream therapeutic approach may be provided by direct modulation of the core IκB/IKKα/β/NF-κB signaling pathway in the local environment. However, the timing, dose and strategy for administration should be considered. Suppression of chronic inflammation via inhibition of NF-κB activity in patients with malfunctioning joint replacements may be an effective strategy to mitigate wear particle induced periprosthetic osteolysis.

Hip resurfacing arthroplasty versus large-diameter head metal-on-metal total hip arthroplasty: comparison of three Designs from the Finnish Arthroplasty Register

Background and Aims:

Large headed metal-on-metal total hip arthroplasty may produce more metal ions than hip resurfacing arthroplasty. Increased metal-ion levels may be associated with higher revision rates due to adverse reaction to metal debris. The purpose of our study was to compare the survivorship of three hip resurfacing arthroplasty designs with their analogous cementless large-diameter head metal-on-metal total hip arthroplasties.

Material and Methods:

Based on data obtained from the Finnish Arthroplasty Register, the revision risks of three metal-on-metal hip resurfacing arthroplasty/total hip arthroplasty design couples performed during 2001–2011 were analyzed using the Cox regression model.

Results:

In the Cox regression analysis for compared design pairs adjusted for age, gender, operated side, head size, diagnosis, and implant, there was no statistically significant difference in revision risk between ReCap hip resurfacing arthroplasty and Bimetric/ReCap total hip arthroplasty (risk ratio = 1.43, confidence interval = 0.95–2.14, p = 0.09) or between Birmingham hip resurfacing arthroplasty and Synergy/Birmingham hip resurfacing total hip arthroplasty (risk ratio = 1.35, confidence interval = 0.75–2.43, p = 0.31). However, the revision risk of Corail and Summit/articular surface replacement total hip arthroplasty (ASR HRA) was significantly increased compared to ASR HRA. (risk ratio = 0.73, confidence interval = 0.54–0.98, p = 0.04).

Conclusion:

We conclude that the short-term revision risk of large headed metal-on-metal total hip arthroplasties was not increased compared to analogous hip resurfacing arthroplasties in two out of three devices studied at a nationwide level. There may be implant-related factors having an effect on the success of single manufacturer devices. However, more information on the incidence of adverse soft-tissue reactions in these patient cohorts is needed.

Clinical failure analysis of contemporary ceramic-on-ceramic total hip replacements

The present study investigates the performance of ceramic-on-ceramic total hip replacements by combining a retrieval analysis with a survivorship analysis to elucidate mechanisms that led to clinical failure. Semiquantitative surface damage assessment, contact profilometry, contour measurements, and scanning electron microscopy were performed to characterize the types and quantify the extent of surface damage on the retrieved ceramic components. The implantation period was positively correlated with both damage scores of the femoral heads (R = 0.573, p < 0.001) and the acetabular cups (R = 0.592, p < 0.001). Increased maximal out-of-roundness values of the femoral heads correlated with both increased metal transfer damage score (R = 0.384, p = 0.023) and increased stripe damage score (R = 0.729, p ≤ 0.001) of the acetabular liners. The damage rate (damage score/year) for both the retrieved heads and acetabular liners was at least 2.2-fold greater at inclination angles of >45° than the damage rate at inclination angles of ≤45°. For the retrieved femoral heads only, the linear wear rate of 25.5 ± 21.3 µm/year at inclination angles of >45° was 6-fold greater than the linear wear rate of 4.2 ± 2.3 µm/year at inclination angles of ≤45°. Metal transfer on the ceramic bearing surface could possibly contribute to fluid-film starvation and, in combination with an increased inclination angle, may facilitate an adhesive wear mechanism associated with stripe surface damage. At our institution, the clinical survivorship of ceramic-on-ceramic total hip replacements was 98.9% (a total of 9 out of 815 patients were revised within 10 years after total hip arthroplasty) with revision as the end point, suggesting their safe use in younger patients.

The effect of femoral head size on functional outcome in primary total hip arthroplasty: a single-blinded randomised controlled trial

We conducted a prospective single-blinded randomised controlled trial to compare the functional and quality of life outcomes in two groups of patients between 60 and 80 years of age undergoing THR; the first receiving a small head (28-32 mm) metal on polyethylene (MoP) articulation, and the second receiving a large head (44-54 mm) metal on metal (MoM) articulation. We recruited 49 patients and randomised them into one of the two groups (22 MoP and 27 MoM). The results demonstrated no statistical difference in any of the assessed functional outcomes at any follow-up point (p>0.05). There were no dislocations or revisions in either group. Although it has been suggested that large head MoM articulations in THA offer superior stability and function, our results suggest that small head MoP articulations can achieve comparable ROM, function and quality of life at short-term follow-up.

Recovery of function following hip resurfacing arthroplasty: a randomized controlled trial comparing an accelerated versus standard physiotherapy rehabilitation programme

Objective:

To identify if a tailored rehabilitation programme is more effective than standard practice at improving function in patients undergoing metal-on-metal hip resurfacing arthroplasty.

Design:

Randomized controlled trial.

Setting:

Specialist orthopaedic hospital.

Subjects:

80 men with a median age of 56 years.

Interventions:

Tailored post-operative physiotherapy programme compared with standard physiotherapy.

Main Outcomes:

Primary outcome – Oxford Hip Score (OHS), Secondary outcomes: Hip disability and Osteoarthritis Outcome Score (HOOS), EuroQol (EQ-5D-3L) and UCLA activity score. Hip range of motion, hip muscle strength and patient selected goals were also assessed.

Results:

At one year the mean (SD) Oxford Hip Score of the intervention group was higher, 45.1 (5.3), than the control group, 39.6 (8.8). This was supported by a linear regression model, which detected a 5.8 unit change in Oxford Hip Score ( p < 0.001), effect size 0.76. There was a statistically significant increase in Hip disability and Osteoarthritis Outcome Score of 12.4% ( p < 0.0005), effect size 0.76; UCLA activity score differed by 0.66 points ( p < 0.019), effect size 0.43; EQ 5D showed an improvement of 0.85 ( p < 0.0005), effect size 0.76. A total of 80% (32 of 40) of the intervention group fully met their self-selected goal compared with 55% (22 of 40) of the control group. Hip range of motion increased significantly; hip flexion by a mean difference 17.9 degrees ( p < 0.0005), hip extension by 5.7 degrees ( p < 0.004) and abduction by 4 degrees ( p < 0.05). Muscle strength improved more in the intervention group but was not statistically significant.

Conclusions:

A tailored physiotherapy programme improved self-reported functional outcomes and hip range of motion in patients undergoing hip resurfacing.

Large-diameter metal-on-metal total hip arthroplasties: a page in orthopedic history?

Large-diameter metal-on-metal (MoM) bearings evolved from the success of hip resurfacing. These implants were used in revision surgery in cases with well-fixed acetabular cups but loose or failed femoral stems, to avoid cup revision. Early data showed low rates of dislocation and potentially low wear profiles due to better fluid film lubrication. The risk of impingement was also thought to be low due to the increased head-neck ratio. Subsequently large-diameter MoM heads gained popularity in primary hip replacement. Recent data has emerged on the unacceptably high revision rates among patients with large-diameter MoM total hip arthroplasties (THAs), high blood levels of metal ions, and adverse tissue reactions. The head-neck (cone-taper) modular interface probably represents the weak link in large metal heads that have been used on conventional tapers. Increased torque of the large head, micromotion, and instability at the cone-taper interface, synergistic interactions between corrosion and wear, edge loading, low clearance, and psoas impingement are the likely causes for early failure of these prostheses.

The biomechanical effect of notch size, notch location, and femur orientation on hip resurfacing failure

For hip resurfacing, this is the first biomechanical study to assess anterior and posterior femoral neck notching and femur flexion and extension. Forty-seven artificial femurs were implanted with the Birmingham hip resurfacing (BHR) using a range of notch sizes (0, 2, and 5 mm), notch locations (superior, anterior, and posterior), and femur orientations (neutral stance, flexion, and extension). Implant preparation was done using imageless computer navigation, and mechanical tests measured stiffness and strength. For notch size and location, in neutral stance the unnotched group had 1.9 times greater strength than the 5-mm superior notch group (4539 N versus 2423 N, p=0.047), and the 5-mm anterior notch group had 1.6 times greater strength than the 5-mm superior notch group, yielding a borderline statistical difference (3988 N versus 2423 N, p = 0.056). For femur orientation, in the presence of a 5-mm anterior notch, femurs in neutral stance had 2.2 times greater stiffness than femurs in 25° flexion (1542 N/mm versus 696 N/mm, p = 0.000). Similarly, in the presence of a 5-mm posterior notch, femurs in neutral stance had 2.8 times greater stiffness than femurs in 25° extension (1637 N/mm versus 575 N/mm, p = 0.000). No other statistical differences were noted. All femurs failed through the neck. The results have implications for BHR surgical techniques and recommended patient activities.

Evaluation of the method for analyzing chromium, cobalt and titanium ion levels in the blood following hip replacement with a metal-on-metal prosthesis

High-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) can be used to measure metal ion levels in whole blood, although the accuracy and repeatability of this method is not yet known in the clinical setting. In this study, chromium, cobalt and titanium ion levels were measured in three whole blood samples, each collected at the same moment from 101 patients undergoing total hip arthroplasty with a metal-on-metal (MoM) bearing. The first sample (purge sample) had direct contact with the metal needle used during insertion of the catheter, whereas the second sample (reference sample) and the third sample (reserve sample) did not. The absolute difference between reference samples and reserve samples was greater than the limit of quantification of the HR-ICP-MS device for all three ions (0.84 versus 0.35 µg/L for chromium, 0.74 versus 0.07 for cobalt, and 0.88 versus 0.70 µg/L for titanium), although the levels were very small in most cases, they exceeded the clinical significant threshold in 19 to 31% of the cases. No clinically significant difference was observed between reference samples and purge samples. Therefore, HR-ICP-MS is a clinically acceptable method to evaluate metal ion levels in blood following hip replacement with an MoM prosthesis, and it is not necessary to discard the purge sample to obtain repeatable results.

Delayed sciatic nerve palsy following resurfacing hip arthroplasty caused by metal debris

The rapid rise in the incidence of failed metal-on-metal hip articulations in recent years has led to many patients requiring complex revision surgery. These failed metal prostheses may produce local metallic debris, which promotes both local and systemic adverse effects. We report an unusual case of failed metal-on-metal resurfacing hip arthroplasty presenting with ipsilateral buttock pain and foot drop 6 months after surgery. After thorough investigations, the metal-on-metal bearing was revised to a metal-on-polyethylene total hip replacement. This resulted in marked improvement in the systemic symptoms, inflammatory marke and metal ion levels postoperatively. However, neither clinical nor neurophysiological sciatic nerve recovery followed. The patient eventually required tendon transfer surgery for her persistent foot drop.

Have the media influenced the use of hip resurfacing arthroplasty? A review of UK print media

INTRODUCTION

The aim of this study was to look at the different claims made about hip resurfacing arthroplasty in the popular UK print media and how this relates to findings in the scientific literature.

METHODS

A review of UK popular print media from January 1992 to June 2011 was performed using the Lexis(®) Library online news database. Only articles discussing the clinical results of hip resurfacing arthroplasty were included. After excluding duplicates, 49 newspaper articles were found suitable for this study. The main outcome measure was the claims made in popular UK print media about hip resurfacing. These were compared with the scientific publication. We reviewed the trend of use of hip resurfacing prostheses during the same period as reported in the National Joint Registry.

RESULTS

A disparity was found between the claims in the newspapers and published scientific literature. The initial newspaper articles highlighted only the positive aspects of hip resurfacing arthroplasty, without definitive contemporary evidence backing the claims. Most of these claims were refuted by future scientific publications. The initial positive media reports coincided with an increase in the use of hip resurfacing but the decline coincided with negative reports in the scientific literature.

CONCLUSIONS

The trend of the newspaper articles and that of the number of hip resurfacing prostheses implanted suggests that the media may have been partly responsible for the increased use of this prosthesis. The subsequent decrease was initiated by the scientific literature.

Deformation of the Durom acetabular component and its impact on tribology in a cadaveric model--a simulator study

BACKGROUND

Recent studies have shown that the acetabular component frequently becomes deformed during press-fit insertion. The aim of this study was to explore the deformation of the Durom cup after implantation and to clarify the impact of deformation on wear and ion release of the Durom large head metal-on-metal (MOM) total hips in simulators.

METHODS

Six Durom cups impacted into reamed acetabula of fresh cadavers were used as the experimental group and another 6 size-paired intact Durom cups constituted the control group. All 12 Durom MOM total hips were put through a 3 million cycle (MC) wear test in simulators.

RESULTS

The 6 cups in the experimental group were all deformed, with a mean deformation of 41.78 ± 8.86 µm. The average volumetric wear rate in the experimental group and in the control group in the first million cycle was 6.65 ± 0.29 mm(3)/MC and 0.89 ± 0.04 mm(3)/MC (t = 48.43, p = 0.000). The ion levels of Cr and Co in the experimental group were also higher than those in the control group before 2.0 MC. However there was no difference in the ion levels between 2.0 and 3.0 MC.

CONCLUSIONS

This finding implies that the non-modular acetabular component of Durom total hip prosthesis is likely to become deformed during press-fit insertion, and that the deformation will result in increased volumetric wear and increased ion release.

CLINICAL RELEVANCE

This study was determined to explore the deformation of the Durom cup after implantation and to clarify the impact of deformation on wear and ion release of the prosthesis. Deformation of the cup after implantation increases the wear of MOM bearings and the resulting ion levels. The clinical use of the Durom large head prosthesis should be with great care.

Are metal ion levels a useful trigger for surgical intervention?

The purpose of this study was to determine if cobalt and chromium ion levels can predict soft tissue damage at total hip revision. This study included 90 metal-on-metal total hip patients with preoperative cobalt and chromium ion levels. Tissue damage noted at revision surgery was graded on a 4-point scale. Sensitivity, specificity, and predictive values were calculated for various threshold values. Receiver operating characteristic analysis was conducted. Using 7 ppb as a threshold, cobalt and chromium ion levels had poor sensitivity and specificity (Co, 65% and 56%; Cr, 29% and 75%). Positive predictive values for cobalt and chromium were only 48% and 26% respectively. The area under the curve was 0.37 for cobalt and 0.44 for chromium. The length of time to revision significantly correlated with tissue damage (P = .001). Ion levels are unreliable predictors of periarticular soft tissue damage and should not be used in isolation as surgical intervention triggers.

Early results of large head metal-on-metal hip arthroplasties

BACKGROUND AND AIMS

Total hip arthroplasty significantly improves patient's life quality. However, total joint replacement is associated with possible complications, such as dislocations, infections, fractures and periprosthetic osteolysis. The goal of this study was to evaluate a large head metal-on-metal total hip arthroplasties and analyse short term complications related to them.

MATERIAL AND METHODS

Between 9/2005 and 6/2009, a total of 691 hip replacements were performed on 635 patients with the use of Magnum M2 large head cementless metal-on-metal prosthesis in Turku University Hospital. All patients had a scheduled follow-up at two to three months, and at one year. The results were evaluated using X-rays, Harris Hip Score (HHS), and evaluating post-operative complications and reasons for re-operations.

RESULTS

During our follow-up the HHS median raised from its preoperative value of 59.8 to 86.4 two to three months after the operation, and to 93.9 one year after the operation. As a complication we had five infections requiring single open debridement (early infection) or a two stage revision. Seven patients had a periprosthetic femoral fracture that was operated and 11 patients were reoperated because of acetabular component malposition, fracture or early loosening. We did not observe any dislocations, n. ischiadicus damages, squeeking or complications related to high metal ion release (ALVAL-reactions (Aseptic Lymphocyte-dominated Vasculitis-Associated Lesion) or pseudotumours).

CONCLUSIONS

The metal-on-metal bearing pair allows large femoral head size, which decreases the risk for dislocation. It may also decrease the risk for osteolysis and aseptic loosening in a long run. Early complication rate related to the bearing surface is minimal. Metal-on-metal prosthesis is a good choice for young and active patients with good bone quality.

ELIGIBILITY FOR THE HIP-RESURFACING ARTHROPLASTY PROCEDURE: AN EVALUATION ON 592 HIPS

Objective: To investigate the percentage of ideal patients who would be eligible for hip-resurfacing surgery at a reference service for hip arthroplasty. Methods: Out of all the cases of hip arthroplasty operated at Hospital do Servidor Público Estadual de São Paulo (HSPE) between January 2009 and December 2010, we assessed a total of 592 procedures that would fit the criteria for indication for resurfacing arthroplasty, after clinical and radiological evaluation according to the criteria established by the Food and Drug Administration (FDA) and by Seyler et al. Results: Among the total number of hip replacement arthroplasty cases, 5.74% of the patients were eligible. Among the patients who underwent primary arthroplasty, we found that 8.23% presented ideal conditions for this procedure. Conclusion: The study demonstrated that this type of surgery still has a limited role among hip surgery methods.

Metal-on-metal total hip arthroplasty: causes and high incidence of early failure

Early failures of metal-on-metal total hip arthroplasty (THA) occur due to aseptic loosening, metal hypersensitivity reactions, pseudotumor formation, and component seizing. The purpose of this study was to investigate the timing, common modes of failure, clinical outcomes, and incidence of metal-on-metal THA revisions. A review was performed of 80 patients who underwent revision of a failed metal-on-metal THA for any reason. The most common reason for metal-on-metal failure was aseptic acetabular loosening, with a rate of 56.25% (45/80 patients). Early failure of metal-on-metal THAs was noted, with 78% of these revisions being performed within 2 years of the index operation and 92.5% within 3 years. Furthermore, 13% of patients experienced significant localized soft tissue reactions. Mean preoperative Harris Hip Score was 42.35 ± 14.24 and mean postoperative Harris Hip Score was 66.5 ± 23.2 (range, 9.55-95.4), with an average follow-up of 438 ± 492 days (range, 40-2141), or 1.2 years.It is imperative that clinicians be cognizant of the fact that the proposed advantages of metal-on-metal THA are not without potential detrimental sequelae. This article proposes an algorithm to aid in diagnosing the etiology of a painful metal-on-metal THA, as well as 2 classification schemes regarding metal-on-metal THA complications to help direct treatment.

One-year prospective comparative study of three large-diameter metal-on-metal total hip prostheses: serum metal ion levels and clinical outcomes

INTRODUCTION

The good clinical outcomes and low wear obtained with 28-mm metal-on-metal implants for total hip replacement prompted the development of large-diameter heads that more closely replicated the normal hip anatomy, with the goal of improving prosthesis stability. However, the blood release of metal ions due to wear at the bearing surfaces and the high rate of groin pain seen with large-diameter implants are causing concern. To determine whether these events are related to the geometry and metal composition of the prosthesis components, we conducted a prospective study of clinical outcomes and serum chromium and cobalt levels 1 year after implantation of three different acetabular cups.

HYPOTHESIS

Serum levels of metal ions are comparable with different types of large-diameter metal-on-metal total hip prostheses.

PATIENTS AND METHODS

We compared 24 Durom™ cups (D), 23 M2a Magnum™ cups (M2a), and 20 Conserve Total™ (C) cups regarding serum chromium and cobalt levels, Postel-Merle d'Aubigné (PMA) scores and Oxford Hip Scores (OHS), as well as radiographic cup orientation and position at 1-year follow-up. Mean age was 66 years (45-85 years), mean body mass index was 28 Kg/m(2) (18-45), patients were almost equally divided between males and females, and the reason for hip replacement was primary hip osteoarthritis in 65 patients and avascular necrosis in two. Metal ions were assayed in serum from blood drawn through non-metallic catheters, using mass spectrometry.

RESULTS

Dislocation occurred in two patients (one D and one M2a) and revision to change the bearing couple was required in two patients in the D group. Serum cobalt levels in the C group were significantly higher (P=0. 0003) than in the two other groups (7.5 μg/L versus 2. 7 μg/L with D and 2. 2 μg/L with M2a). Clinical outcomes were better in the M2a group (PMA, 17.7 [16-18]; and OHS, 15.2 [12-30]; P<0.05). The PMA score and OHS were 17.5 (16-18) and 18.2 (12-42), respectively, with D; and 16.75 (10-18) and 22. 2 (12-42), respectively, with C cups. When all three cup models were pooled, serum ion levels were higher in patients with pain than without pain (chromium, 7.1 μg/L versus 2.1 μg/L [P=0.002], and cobalt, 8 μg/L versus 2.6 μg/L [P=0.0004]).

DISCUSSION

Serum chrome and cobalt levels increased after metal-on-metal total hip replacement, and the increase was greater with large-diameter implants than previously reported with 28-mm implants. Persistent pain was significantly associated with higher metal ion levels, with a probable cobalt cut-off of about 8 μg/L. Differences in modular head-neck concepts may explain the observed variations.

Total joint replacement in adolescents: literature review and case examples

PURPOSE OF REVIEW

The current review summarizes the recent studies of total knee and hip replacement outcomes in adolescent patients, as well as highlights current replacement strategies and bearing options.

RECENT FINDINGS

The survival rates of total knee and hip replacements in adolescents are lower compared with those in the elderly adults. Adolescent patients almost inevitably require revision surgery in their lifetime. Cementless arthroplasty is a promising replacement strategy in adolescents because, theoretically, if bone ingrowth occurs, then implant survival should improve; further, if revision is required, the surgeon does not have the burden of removing cement. However, recent data suggest no difference in survival rates between cementless and cemented implants in the short-term. The advantages and disadvantages between various bearing surfaces in this population also remain controversial and survival data are limited.

SUMMARY

Total knee and hip replacement, although rare in the adolescent population, is successful at alleviating pain and restoring mobility in end-stage arthritic disease in the short-term. Numerous replacement strategies and bearing options are currently available; however, there is currently no standard of care or implants specifically designed for the adolescent population. Long-term studies looking at the survival of the various prostheses is essential to determine the efficacy and safety in the adolescent population with different causes of end-stage arthritic disease.

Cushion bearings versus large diameter head metal-on-metal bearings in total hip arthroplasty: a short-term metal ion study

INTRODUCTION

Metal-on-metal total hip arthroplasty (MOM THA) has the advantage of replicating the femoral head size, but the postoperative elevation of serum metal ion levels is a cause for concern. Metal-on-polycarbonate-urethane is a new cushion bearing featuring a large diameter metal head coupled with a polycarbonate-urethane liner.

AIM

The aim of this study was to assess and compare serum cobalt (Co) and chromium (Cr) levels in a group of 15 patients treated with a cushion bearing THA system (Group A) and a group of 15 patients treated with a MOM THA system (Group B) at short-term. At a mean follow-up of 27.3 months (18-35 months), in Group A the median Cr and Co serum levels were significantly lower than in Group B, measuring 0.24 μg/L (0.1-2.1 μg/L) and 0.6 μg/L (0.29-2.3 μg/L) compared to 1.3 μg/L (0.1-9 μg/L, p < 0.001) and 2.9 μg/L (0.85-13.8 μg/L, p < 0.001) respectively.

RESULTS

All patients demonstrated an excellent clinical result, as shown by the Harris and Oxford hip scores. The cushion bearing THA studied in this paper showed clinical outcomes similar to the MOM THA bearing, with the advantage of no significant metal ion elevation in the serum.

CONCLUSION

These findings warrant the continued clinical study of compliant bearing options.

An analysis of stably fixed femoral components retained during revision total hip arthroplasty

This study was conducted to analyze the clinical and radiographic results of isolated acetabular revisions during which intact femoral stems were retained. Twenty-nine hips of 26 patients who were followed up for a minimum of 3 years were examined. The average time from primary operation to revision surgery was 9.2 years, and the average follow-up time after revision was 5 years. The average Harris hip scores improved from 56.4 to 89.8 points after revision surgery, and in all cases, the acetabular components and femoral stems were assessed as stable at the final follow-up. The average length of service of the femoral components was 14.2 years. In conclusion, we recommend that isolated acetabular revision be considered in cases with an acetabular component failure and a stable femoral component.

Serum metal ion concentrations after unilateral vs bilateral large-head metal-on-metal primary total hip arthroplasty

It is unknown if the presence of bilateral well-functioning large-head metal-on-metal (MOM) total hip arthroplasties (THAs) leads to higher serum metal ion concentrations than unilateral MOM THA. Elevated levels (chromium, 17 μg/L; cobalt, 19 μg/L) have been associated with poorly functioning MOM THA with metallosis. Fourteen patients having undergone bilateral and 25 patients having undergone unilateral large-head primary MOM THA were compared. Harris Hip Scores, University of California Los Angeles activity scores, radiographs, serum creatinine, and serum cobalt and chromium levels were obtained. Only cobalt ion levels were significantly higher in the bilateral group than in the unilateral group (1.8 μg/L vs 1.0 μg/L, P = .029). Comparatively, this magnitude is clinically rather low because ion levels did not approach those associated with metallosis in either group. We conclude that although patients with well-functioning bilateral MOM THA may have slightly higher cobalt levels, neither cobalt nor chromium levels approach those seen in poorly functioning MOM THA with metallosis.

Serum metal ion concentration: comparison between small and large head metal-on-metal total hip arthroplasty

The purpose of this study was to compare serum metal ion concentrations (chromium and cobalt) in 3 groups, 2 with metal-on-metal articulations and a control metal-on-polyethylene group. Forty-six patients with good to well-functioning hips were recruited for the study. Serum ion levels of all patients were drawn, and Harris Hip Score, University of California, Los Angeles activity score, and radiographs were performed. Serum chromium concentrations were significantly lower in the large head group compared with the small head group (P = .013). There was no difference in the cobalt concentrations between the 2 groups (P = .087). There was a significant difference between both metal-on-metal groups when compared with controls for both chromium and cobalt levels (P = .0005 and P = .0004, control vs small; P = .001 and P = .0001, control vs large, respectively).

Early to mid-term results of ceramic-on-ceramic total hip replacement: analysis of bearing-surface-related complications

Ceramic-on-ceramic bearings in hip replacement have low rates of wear and are increasingly being used in young adults. Our aim was to determine the incidence of audible phenomena or other bearing-related complications. We retrospectively analysed 250 ceramic-on-ceramic hip replacements in 224 patients which had been implanted between April 2000 and December 2007. The mean age of the patients at operation was 44 years (14 to 83) and all the operations were performed using the same surgical technique at a single centre. At a mean follow-up of 59 months (24 to 94), the mean Oxford hip score was 40.89 (11 to 48). There were six revisions, three of which were for impingement-related complications. No patient reported squeaking, but six described grinding or clicking, which was usually associated with deep flexion. No radiological evidence of osteolysis or migration of the components was observed in any hip. The early to mid-term results of contemporary ceramic-on-ceramic hip replacement show promising results with few concerns in terms of noise and squeaking. Positioning of the acetabular component remains critical in regard to the reduction of other impingement-related complications.