Influence of Maxillary Sinus Width on New Bone Formation After Transcrestal Sinus Floor Elevation: A Proof-of-Concept Prospective Cohort Study

A nomogram prediction of implant apical non-coverage on bone-added transcrestal sinus floor elevation: A retrospective cohort study

OBJECTIVES

To identify the risk indicators and develop and validate a nomogram prediction model of implant apical non-coverage by comprehensively analyzing clinical and radiographic factors in bone-added transcrestal sinus floor elevation (TSFE).

MATERIAL AND METHODS

A total of 260 implants in 195 patients receiving bone-added TSFE were included in the study. The population was divided into a development (180 implants) and a validation (80 implants) cohort. According to 6 months post-surgery radiographic images, implants were categorized as "apical non-coverage" or "apical covered." The association of risk factors including clinical and radiographic parameters with implant apical non-coverage was assessed using regression analyses. A nomogram prediction model was developed, and its validation and discriminatory ability were analyzed.

RESULTS

The nomogram predicting bone-added TSFE's simultaneously placed implant's apex non-coverage after 6 months. This study revealed that sinus angle, endo-sinus bone gain, implant protrusion length, graft contact walls, and distal angle were predictors of implant apical non-coverage. The generated nomogram showed a strong predictive capability (area under the curve [AUC] = 0.845), confirmed by internal validation using 10-fold cross-validation (Median AUC of 0.870) and temporal validation (AUC = 0.854). The calibration curve and decision curve analysis demonstrated good performance and high net benefit of the nomogram, respectively.

CONCLUSIONS

The clinical implementation of the present nomogram is suitable for predicting the apex non-coverage of implants placed simultaneously with bone-added TSFE after 6 months.

Sinus floor augmentation using crestal approach in conjunction with hydroxyapatite/cross-linked collagen sponge: A pilot study

BACKGROUND

Different biomaterials were suggested for sinus floor augmentation (SFA). Recently, new materials were launched showing true bone formation without remnants.

PURPOSE

The aim of this prospective study was to evaluate an hydroxyapatite-based, sugar cross-linked collagen sponge (OSSIX™ Bone) in transcrestal SFA (t-SFA).

MATERIALS AND METHODS

Twenty-four patients with edentulous posterior maxilla and residual bone height (RBH) >4 mm underwent t-SFA with OSSIX™ Bone as grafting material and simultaneous implant placement. The implant Stability Quotient (ISQ) was measured by resonance frequency analysis (RFA) directly after implant insertion and at 6 months. Differences in bone height (BH) and volume were determined in CBCT and x-rays at baseline versus 1 year of follow-up. Graft volume was evaluated by tridimensional reconstructions. Linear regression analysis was used to evaluate the effect of bucco-palatal sinus dimension, RBH, and length of the implant protruding (PIL) into the sinus, on the graft height (GH) changes up to 1 year, and on the graft volume at 1 year. Autocorrelation between time lag and augmented bone volume was evaluated through time series analysis correlograms. Health-related quality-of-life outcomes were captured.

RESULTS

Twenty-two patients completed the study. The mean RBH measured at baseline was 5.81 ± 2.2 mm. The mean graft volume was 1085.8 ± 733.4 mm3 . The mean GH, measured in the immediate post-operative period, at 6 and 12 months respectively, was 7.24 mm ±1.94; 6.57 mm ± 2.30; 5.46 mm ± 2.04. The mean ISQ measured after the implant placement was 62.19 ± 8.09, and 6 months later was 76.91 ± 4.50. There was a significant correlation between buccolingual dimension and graft volume at 1 year. Neither buccolingual volume nor RBH had a significant effect on GH change, while the PIL showed a significant positive correlation (P = 0.02 and P = 0.03 at 6 and 12 months, respectively). The correlograms indicated no significant correlation, meaning that there is no tendency for graft volume to increase or decrease over time, therefore suggesting graft stability, at least up to one year of follow-up. 86% of patients had no chewing interference.

CONCLUSION

Within the limitations of the study, OSSIX™ Bone could be considered a valid material for SFA due to its manageability and its positive results in promoting new bone formation with long-term stability. T-SFA is confirmed as a less invasive and less painful method.

Maxillary sinus floor augmentation: a review of current evidence on anatomical factors and a decision tree

Maxillary sinus floor augmentation using lateral window and crestal technique is considered as predictable methods to increase the residual bone height; however, this surgery is commonly complicated by Schneiderian membrane perforation, which is closely related to anatomical factors. This article aimed to assess anatomical factors on successful augmentation procedures. After review of the current evidence on sinus augmentation techniques, anatomical factors related to the stretching potential of Schneiderian membrane were assessed and a decision tree for the rational choice of surgical approaches was proposed. Schneiderian membrane perforation might occur when local tension exceeds its stretching potential, which is closely related to anatomical variations of the maxillary sinus. Choice of a surgical approach and clinical outcomes are influenced by the stretching potential of Schneiderian membrane. In addition to the residual bone height, clinicians should also consider the stretching potential affected by the membrane health condition, the contours of the maxillary sinus, and the presence of antral septa when evaluating the choice of surgical approaches and clinical outcomes.

Six-year extension results of a randomized trial comparing transcrestal and lateral sinus floor elevation at sites with 3-6 mm of residual bone

OBJECTIVES

To comparatively evaluate the 6-year outcomes of transcrestal and lateral sinus floor elevation (tSFE and lSFE, respectively).

METHODS

The 54 patients representing the per-protocol population of a randomized trial comparing implant placement with simultaneous tSFE versus lSFE at sites with a residual bone height of 3-6 mm were invited to participate in the 6-year follow-up visit. Study assessments included: peri-implant marginal bone level at the mesial (mMBL) and distal (dMBL) aspects of the implant, proportion of the entire implant surface in direct contact with the radiopaque area (totCON%), probing depth, bleeding on probing, suppuration on probing, and modified plaque index. Also, the conditions of the peri-implant tissues at 6-year visit were diagnosed according to the case definitions of peri-implant health, mucositis, and peri-implantitis from the 2017 World Workshop.

RESULTS

Forty-three patients (21 treated with tSFE and 22 treated with lSFE) participated in the 6-year visit. Implant survival was 100%. At 6 years, totCON% was 96% (IR: 88%-100%) in tSFE group and 100% (IR: 98%-100%) in lSFE group (p = .036). No significant intergroup difference in patient distribution according to the diagnosis of peri-implant health/disease was observed. Median dMBL was 0.3 mm in tSFE group and 0 mm in lSFE group (p = .024).

CONCLUSIONS

At 6 years following placement concomitantly with tSFE and lSFE, implants showed similar conditions of peri-implant health. Peri-implant bone support was high in both groups and was slightly but significantly lower in tSFE group.

Clinical and radiographic outcomes following transcrestal maxillary sinus floor elevation with injectable xenogenous bone substitute in gel form: a prospective multicenter study

Purpose

To investigate clinical and radiographic outcomes of transcrestal maxillary sinus floor elevation performed with an injectable xenograft in gel form, analyzing general, local and surgical variables possibly influencing the results.

Methods

Patients with residual crestal height < 5 mm underwent transcrestal sinus floor elevation with xenograft in gel form to allow the placement of a single implant. Simultaneous implant placement was performed when primary stability was ≥ 15 Ncm. Graft height was measured immediately after surgery (T0) and after 6 months of healing (T1). Univariate and multivariate regression models were built to assess associations between clinical variables with implant survival and graft height at T1.

Results

71 patients underwent transcrestal sinus floor elevation and 54 implants were simultaneously placed. Delayed implant placement (at T1) was possible in 5 cases out of 17 (29.4%), whereas in 12 patients (70.6%) implant insertion was not possible or required additional sinus grafting. Implant survival rate, with a follow-up varying from 12 to 32 months after loading, was 100%. Mean pre-operative bone height was 3.8 ± 1.0 mm, at T0 was 13.9 ± 2.2 mm and at T1 was 9.9 ± 2.8 mm. Bone height at T1 was negatively influenced by membrane perforation at surgery (p = 0.004) and positively influenced by immediate implant insertion (p < 0.001).

Conclusions

Transcrestal sinus floor elevation performed with injectable xenograft gel resulted in 100% implant survival rate. However, immediate implant insertion seems a crucial factor to preserve vertical bone gain: one-stage technique seems to be the most predictable approach to optimize clinical outcomes with this approach.

Trial registration clinicaltrials.gov, NCT05305521. Registered 31 March 2022—Retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT05305521.

Intraoperative complications and early implant failure after transcrestal sinus floor elevation with residual bone height ≤5 mm: A retrospective multicenter study

OBJECTIVE

Clinical indications for maxillary sinus floor elevation with transcrestal techniques have increased in recent years even in sites with minimal residual bone height (RBH). Nevertheless, limited information is currently available on incidence of intraoperative complications and early implant failure in these cases.

MATERIAL AND METHODS

This retrospective multicenter study was performed on anonymized clinical and radiographic records of patients who underwent transcrestal sinus floor elevation in seven clinical centers. Influence of different factors related to patient, sinus anatomy and surgical technique on the incidence of intraoperative complications and early implant failure rate after transcrestal sinus lift were investigated.

RESULTS

A total of 430 patients treated with transcrestal sinus floor elevation for single implant insertion in sites with RBH ≤5 mm were included in the final analysis. After one year of loading, 418 implants out of 430 were satisfactorily in function. Early implant failure was recorded in 12 cases (2.8%), resulting significantly associated with the presence of large sinus cavities and with the occurrence of membrane perforation. The following adverse events were recorded: membrane perforation (7.2%), acute sinusitis (0.9%), implant displacement into the sinus cavity (0.7%), oro-antral fistula (0.2%) and benign paroxysmal positional vertigo (0.5% of osteotome cases). A strong direct correlation between sinus membrane perforation and bucco-palatal sinus width (p=0.000) was demonstrated.

CONCLUSIONS

Early implant failure after transcrestal sinus elevation showed significant direct correlation with bucco-palatal maxillary sinus width and the presence of membrane perforation. Sinus membrane perforation was strongly associated with bucco-palatal sinus width (extremely low perforation rate in narrow and much higher incidence in wide sinuses).

Does new bone formation vary in different sites within the same maxillary sinus after lateral augmentation? A prospective histomorphometric study

OBJECTIVE

The aim of this study was to evaluate histomorphometric outcomes of lateral maxillary sinus augmentation in different areas of the same cavity and to correlate results to bucco-palatal sinus width (SW) and residual bone height (RBH).

MATERIAL AND METHODS

Patients needing maxillary sinus floor elevation (RBH <5 mm) to insert two nonadjacent implants were treated with lateral augmentation using a composite graft. Six months later, two bone-core biopsies (mesial/distal) were retrieved in implant insertion sites. SW and RBH were measured on cone beam computed tomography, and correlations between histomorphometric and anatomical parameters were evaluated by multivariate linear regression analysis.

RESULTS

Twenty patients underwent sinus augmentation, and eighteen were included in the final analysis (two dropouts for membrane perforation). Mean newly formed mineralized tissue percentage (%NFMT) after 6 months in mesial and distal sites was 17.5 ± 4.7 and 11.6 ± 4.7, respectively (p = .0004). Multivariate linear regression showed a strong negative correlation between SW and %NFMT (β coefficient=-.774, p < .0001) and no correlation between RBH and %NFMT (β coefficient =-.038, p = .825).

CONCLUSIONS

The present study confirms that %NFMT after lateral sinus augmentation occurs at different rates in different anatomical areas of the same maxillary sinus, showing a strong negative correlation with SW, whereas no influence of RBH was observed. Clinicians should regard SW as a guide for graft selection and to decide duration of the healing period. Researchers should consider SW as a predictor variable, when comparing regenerative outcomes of different biomaterials by using maxillary sinus as an experimental model.

Influence of anatomical factors related to maxillary sinus on outcomes of transcrestal sinus floor elevation

Background/purpose

Graft bone maturation and remodeling in the maxillary sinus require adequate angiogenesis and osteoprogenitor cells migration from the surrounding bony walls and Schneiderian membrane. This study aimed to evaluate the influence of anatomical factors related to maxillary sinus on the outcomes of transcrestal sinus floor elevation using cone-beam computed tomography (CBCT).

Materials and methods

Forty-five patients (63 elevated sites) were included in this study. CBCT were obtained preoperatively, immediately and 6 months after surgery. The anatomical features of residual bone height, maxillary sinus width, maxillary sinus angle and Schneiderian membrane thickness were measured on preoperative CBCT. Descriptive statistics and correlation analysis were conducted to evaluate the influence of anatomical factors on outcome parameters, including sinus lift height, graft bone resorption and marginal bone loss.

Results

The results showed that there was a positive correlation between sinus width and graft bone resorption. A significantly positive correlation between sinus angle and graft bone resorption was also found.

Conclusion

Our findings indicate that the anatomical factors of maxillary sinus (sinus width and sinus angle) have influence on the linear change of bone grafts after transcrestal sinus floor elevation.

The effect of anatomy on osteogenesis after maxillary sinus floor augmentation: a radiographic and histological analysis

OBJECTIVES

To assess how anatomy and osteogenesis correlated with results of maxillary sinus floor augmentation (MSFA).

MATERIALS AND METHODS

Patients with partial edentulism and advanced atrophy of the posterior maxillae (≤ 4 mm residual bone height, RBH) underwent MSFA with sole deproteinized bovine bone matrix (DBBM) through a lateral approach. After a 6 to 9-month healing period, bone core biopsies were obtained from the sites of implant insertion for histological evaluation. The correlations between anatomical and histomorphometric variables were analyzed in a multiple regression model.

RESULTS

Forty-nine patients were recruited. One biopsy per patient was obtained from the augmented sinus. Thirty-seven bone core biopsies were intact and met the requirement for histomorphometry analysis. The mean (± standard deviation) percentages of vital bone (VB), remaining DBBM, and non-mineralized tissue were 18.25 ± 4.76%, 27.74 ± 6.68%, and 54.08 ± 6.07%, respectively. No statistically significant correlations were found between RBH and VB% (p = 0.44) or between sinus contour and VB% (p = 0.33). However, there was an inverse correlation between the sinus width (SW) and VB % (SW₁: R² = 0.13, p = 0.03; SW₂: R² = 0.15, p = 0.02).

CONCLUSIONS

After a healing period of 6-9 months, wider sinuses augmented with DBBM alone tended to have a lower proportion of new bone formation, while RBH and sinus contour did not appear to affect osteogenesis after MSFA.

CLINICAL RELEVANCE

This study emphasized the effect of anatomy on osteogenesis after MSFA. The result of the study may have an indication to the clinician that SW is a consideration when selecting the bone grafting material and deciding the healing period of MSFA.

[Effect of anatomical parameters of maxillary sinus on the outcomes of transcrestal sinus lift]

OBJECTIVE

To investigate the effect of three anatomical parameters (maxillary sinus width, maxillary sinus angle, and residual bone height) on the outcomes of transcrestal sinus lift with simultaneous implant placement.

METHODS

A total of 60 maxillary sinuses in 42 patients were included in this study. All patients were treated with transcrestal sinus lift procedure associated with simultaneous implant placement using a composite graft material of autogenous bone and Bio-Oss. For each patient, beam computed tomography (CBCT) scans were performed preoperatively, immediately after surgery, and 6 months after surgery. The parameters were measured on the preoperative and postoperative CBCT images. The correlation of three anatomical parameters with graft resorption was analyzed using Pearson's correlation test.

RESULTS

The average residual bone height was (4.46±1.55) mm. The average width of maxillary sinus was (13.86±2.71) mm. The average sinus angle was 78.09°±10.27°. A significant positive correlation was observed between maxillary sinus width and graft resorption (P<0.01). A positive association was also found between sinus angle and graft resorption (P<0.01).

CONCLUSIONS

The findings show that graft bone resorption in elevated sinus has a positive correlation with the sinus width and sinus angle.

The comparative evaluation of transcrestal and lateral sinus floor elevation in sites with residual bone height ≤6 mm: A two-year prospective randomized study

OBJECTIVES

To compare clinical and radiographic outcomes between transcrestal sinus floor elevation (TSFE) and lateral sinus floor elevation (LSFE) approaches of simultaneous implant placement in atrophic maxilla.

MATERIALS AND METHODS

Patients with a residual bone height (RBH) ≤6 mm were enrolled and randomly assigned to TSFE and LSFE groups. Patients in both groups simultaneously underwent sinus floor elevation with bovine-derived xenograft and implant placement. Clinical and radiographic results were evaluated immediately after surgery and after 6, 12, 18, and 24 months. The endo-sinus bone gain (ESBG), apical implant bone height (ABH), endo-sinus bone-implant contact rate (EBICR), and crestal bone level (CBL) were assessed using panoramic radiographs.

RESULTS

Forty-one implants (TSFE: 21, LSFE: 20) were placed in cases with a mean RBH of 3.77 ± 1.16 mm. All implants obtained clinical success and satisfactory ESBG at 24 months. No significant differences were found in ESBG and ABH between two groups immediately after surgery, but LSFE group showed significantly higher values than TSFE group thereafter. Grafts in TSFE group reached stability 6 months earlier than that in LSFE group. In both groups, EBICR was almost 100%, and CBL showed no detectable changes.

CONCLUSIONS

LSFE can achieve higher ESBG 2 years after surgery. Otherwise, TSFE could be an alternative to LSFE, when the access for lateral window preparation is limited. Both approaches were highly predictable for RBH ≤6 mm during 24-month observation period for the implants placed simultaneously.

Three-Dimensional Radiographic Evaluation of the Malar Bone Engagement Available for Ideal Zygomatic Implant Placement

Zygomatic implant rehabilitation is a challenging procedure that requires an accurate prosthetic and implant plan. The aim of this study was to evaluate the malar bone available for three-dimensional zygomatic implant placement on the possible trajectories exhibiting optimal occlusal emergence. After a preliminary analysis on 30 computed tomography (CT) scans of dentate patients to identify the ideal implant emergencies, we used 80 CT scans of edentulous patients to create two sagittal planes representing the possible trajectories of the anterior and posterior zygomatic implants. These planes were rotated clockwise on the ideal emergence points and three different hypothetical implant trajectories per zygoma were drawn for each slice. Then, the engageable malar bone and intra- and extra-sinus paths were measured. It was possible to identify the ideal implant emergences via anatomical landmarks with a high predictability. Significant differences were evident between males and females, between implants featuring anterior and those featuring posterior emergences, and between the different trajectories. The use of internal trajectories provided better bone engagement but required a higher intra-sinus path. A significant association was found between higher intra-sinus paths and lower crestal bone heights.

A reduced healing protocol for sinus floor elevation in a staged approach with deproteinized bovine bone mineral alone: A randomized controlled clinical trial of a 5-month healing in comparison to the 8-month healing

PURPOSE

To investigate the feasibility of reducing the healing time of maxillary sinus floor elevation (MSFE) by a two-stage approach using deproteinized bovine bone mineral (DBBM) alone, based on clinical, histomorphometric, and microradiographic evaluations.

MATERIALS AND METHODS

Twenty consecutive cases with an atrophic posterior edentulous maxilla were randomly assigned to two groups at a ratio of 1:1. The lateral window approach to MSFE with DBBM alone was followed by an 8-month bone-healing period in the control group compared to 5 months in the test group. During implant placement, bone biopsies were harvested from implant osteotomy sites for micro-computed tomography (CT), histological, and histomorphometric evaluations. Cone beam CT (CBCT) scans were performed before and immediately after MSFE and after the bone-healing periods. The implant stability quotient (ISQ) was measured sequentially at implant placement and 1, 3, and 6 months thereafter.

RESULTS

The histomorphometric and microradiographic results showed no significant differences in new bone formation on the augmented sinus floor between the two groups (all Ps > .05), except that trabecular thickness was significantly reduced and trabecular separation significantly increased in the test group (both Ps < .05). The ISQs of both groups increased continuously after implant placement, but the difference was not significant between the groups at each time point. CBCT analyses showed that the extent of volumetric loss was comparable after bone healing for 5 and 8 months (P > .05).

CONCLUSIONS

Within the limitations of this study, the bone-healing time of MSFE with DBBM alone for staged implant placement could be reduced to 5 months instead of 8 or 9 months, based on the histomorphometric, microradiographic, and clinical outcomes; however, impact on long-term implant survival remains unknown and needs further investigation with long-term follow-ups.

Grafted bone remodeling following transcrestal sinus floor elevation: A cone-beam computed tomography study

Background

Transcrestal sinus floor elevation is a reliable procedure when additional bone height is needed for maxillary implant placement. However, the grafted bone undergoes remodeling and the dimensional stability of grafted bone height may be affected by several clinical factors, including graft material, sinus anatomy and the morphology of grafted space.

Methods

This retrospective study examined patients who had undergone transcrestal sinus floor elevation with synthetic biphasic calcium phosphate and single implant placement. The reduction of sinus graft height (GHR) after 6–8 months healing period was measured with cone-beam computed tomography (CBCT) images. Correlating factors, including vertical amount of implant protrusion (IP), sinus width, and the morphology of grafted space were analyzed by Spearman's correlation test.

Results

A total of 25 implant sites were analyzed. The mean GHR was 0.57 ± 0.49 mm, which was positively correlated with IP, vertical elevation height (VEH), and the ratio of vertical to horizontal elevation of the grafted space. However, GHR was not correlated with sinus width and mesial-distal or buccal-palatal width of the grafted space.

Conclusions

Synthetic biphasic calcium phosphate used in transcrestal sinus floor elevation underwent shrinkages and graft remodeling. Grafted height reduction was associated with IP, VEH, and the ratio of vertical to horizontal elevation of the grafted space.

Maxillary Sinus Floor Augmentation With or Without Barrier Membrane Coverage of the Lateral Window: a Systematic Review and Meta-Analysis

Objectives

Test the hypothesis of no difference in implant treatment outcomes after maxillary sinus floor augmentation with or without barrier membrane coverage of the lateral window.

Material and Methods

A MEDLINE (PubMed), Embase and Cochrane library search in combination with a hand-search of relevant journals was conducted. Human studies published in English until the 5th of July, 2019 were included. Randomised controlled trials and controlled trials with an observation period of minimum six months were included. Primary outcomes included survival of suprastructures and implants. Secondary outcomes included implant stability quotient, peri-implant marginal bone loss, bone regeneration, patient-reported outcome measures, biologic and mechanical complications.

Results

The electronic search and hand-searching resulted in 1068 entries. Six randomised controlled trials characterised by low to high risk of bias and one controlled trial with high risk of bias fulfilled the inclusion criteria. High implant survival rate was reported with both treatment modalities. Meta-analyses disclosed a mean difference of newly formed bone of 6.4% (confidence interval = 0 to 12.9) and non-mineralised tissue of -1.1% (confidence interval = -2.7 to 0.5), indicating more newly formed bone and diminished non-mineralised with barrier membrane coverage.

Conclusions

There seem to be no statistically significant differences in implant treatment outcomes after maxillary sinus floor augmentation with or without barrier membrane coverage of the lateral window. However, barrier membrane coverage increases percentage of newly formed bone and diminishes proliferation of non-mineralised tissue. Thus, barrier membrane coverage seems to be beneficial and also preventing displacement of the grafting material.

A Critical Review on the Production of Electrospun Nanofibres for Guided Bone Regeneration in Oral Surgery

Nanofibre-based membranes or scaffolds exhibit high surface-to-volume ratio, which allows an improved cell adhesion, representing an attractive subgroup of biomaterials due to their unique properties. Among several techniques of nanofiber production, electrospinning is a cost-effective technique that has been, to date, attractive for several medical applications. Among these, guided bone regeneration is a surgical procedure in which bone regeneration, due to bone atrophy following tooth loss, is "guided" by an occlusive barrier. The membrane should protect the initial blood clot from any compression, shielding the bone matrix during maturation from infiltration of soft tissues cells. This review will focus its attention on the application of electrospinning (ELS) in oral surgery bone regeneration. Despite the abundance of published papers related to the electrospinning technique applied in the field of bone regeneration of the jaws, to the authors' knowledge, no articles report clinical application of these structures. Moreover, only a few records can be found with in vivo application. Therefore, no human studies have to date been detectable. New approaches such as multifunctional multilayering and coupling with bone promoting factors or antimicrobial agents, makes this technology very attractive. However, greater efforts should be made by researchers and companies to turn these results into clinical practice.

The impact of graft remodeling on peri-implant bone support at implants placed concomitantly with transcrestal sinus floor elevation: A multicenter, retrospective case series

OBJECTIVES

To evaluate the impact on peri-implant bone support (as assessed on periapical radiographs) of the remodeling dynamics of varying graft biomaterials used for transcrestal sinus floor elevation (tSFE).

METHODS

The study is a multicenter, retrospective series of cases undergone tSFE (performed according to the Smart Lift technique) and concomitant implant placement. At operator's discretion, tSFE was performed with bone core (BC) alone or supplemented by deproteinized bovine or porcine bone mineral (DBBM and DPBM, respectively), synthetic hydroxyapatite in a collagen matrix (S-HA), or ß-tricalcium phosphate (ß-TCP). Immediately after surgery, at 6-12 months post-surgery, and at later (≥24 months) follow-up intervals, the percentage proportion of the implant surface in direct contact with the radiopaque area was calculated for the entire implant surface (totCON%). Also, the height of the graft apical to the implant apex (aGH) was assessed.

RESULTS

At 6-12 months following tSFE, median totCON% was 100%, with a median aGH of 1.4 mm. A tendency of aGH to decrease in height was observed at later follow-up intervals for sites treated with all grafting procedures. In all treatment groups, the majority of the implant surface was still surrounded by the radiopaque area at the longest follow-up visits.

CONCLUSIONS

Although the height of the peri-implant radiopaque area apical to the implant apex tends to reduce overtime at sites which have received tSFE, the peri-implant bone support seems to be maintained long term irrespective of the graft material used.

Management of Schneiderian Membrane Perforations during Sinus Augmentation Procedures: A Preliminary Comparison of Two Different Approaches

BACKGROUND

The aim of this study was to retrospectively analyze two different sealing techniques for sinus membrane perforations produced during sinus floor augmentation by a lateral approach.

METHODS

A total of 172 lateral-approach sinus floor augmentation surgeries were performed on 130 patients. Sixty-one membrane perforations (35%) were reported. Most of the perforations were caused by accidental membrane tearing and 16 (26%) were caused by deliberate incision for mucocele removal. In 31 perforation cases (51%), the Schneiderian membrane was sealed by suturing, while the remaining 30 cases (49%) were sealed using a low-resorption collagen membrane coverage.

RESULTS

Out of the 31 cases treated with a suture-sealing techniques, 26 (84%) were successful, presenting graft integration. Failure occurred in the other five (16%) cases. Out of the 30 perforations sealed with low-resorption collagen membranes, 28 (93%) presented successful graft integration, while two (7%) failed.

CONCLUSIONS

Both surgical techniques yielded therapeutic success.

Fresh Frozen Allogeneic Bone Block in Maxillary Sinus Floor Elevation: Histomorphometric Analysis of a Bone Specimen Retrieved 15 Years after Grafting Procedure

Nowadays implant-prosthetic rehabilitations are one of the best solutions for rehabilitating our patients. These allow obtaining rehabilitations with optimal functional and aesthetic performances. Often patients, who undergo implant-prosthetic therapy, have the conditions of edentulias, single or multiple, that have been going on for some time. This, according to the literature, produces resorption of the alveolar bone, a process that is complicated in the posterior area of the upper arch by a pneumatization of the maxillary sinuses. The loss of vertical height, so that the implant fixtures can be inserted, requires a maneuver called maxillary sinus floor elevation. This procedure, now safely performed with piezoelectric instruments, allows increasing bone height through bone grafting. In this study, the tissue obtained from a patient, after 15 years from the intervention, was evaluated by histological and SEM analyses. The bone healing in the patient has led to a perfect integration between the patient’s bone and the fresh frozen allograft used, however still present and detectable after 15 years.

Variation in bucco-palatal maxillary sinus width does not permit a meaningful sinus classification

OBJECTIVES

The bucco-palatal sinus width (SW) appears as relevant factor for graft consolidation after maxillary sinus (MS) floor augmentation. The present study aimed to assess (a) SW at different height levels of posterior teeth, (b) possible factors influencing SW, and (c) whether a simple/meaningful sinus classification based on SW is possible.

METHODS

The following parameters were recorded on computed tomographies of 76 edentulous and 86 partially edentulous maxillary quadrants displaying 383 tooth sites in total: (a) alveolar ridge height, (b) -area, (c) -width 2 mm apical to the alveolar crest, (d) -width at the sinus floor, and (e) SW and sinus area at a level 2, 4, 6, 8, and 10 mm above the sinus floor. The possible influence of gender, tooth position [i.e., premolar (PM); molar (M)], tooth-gap extent, and residual alveolar ridge dimensions on SW was assessed. Further, based on percentiles of average values or on the frequency distribution of SW <10, 10-15, or >15 mm, it was attempted to classify the sinus at each given site into narrow, average, or wide.

RESULTS

Gender and tooth-gap extent presented no relevant impact on MS dimensions; however, significant differences were observed among the various tooth positions regarding all evaluated parameters. The lower the residual alveolar ridge, the wider the MS at 4-10 mm height, while the wider the residual alveolar ridge, the wider the MS. Large variation in SW classes among the different height levels within the same tooth position and among tooth positions within the same person was observed, irrespective of the threshold applied. Further, at a MS height of 10 mm at PM1, PM2, M1, and M2, SW was <10 mm in 68%, 33%, 0%, and 7% of the cases, respectively, while in 3%, 21%, 65%, and 57%, respectively, SW was >15 mm.

CONCLUSIONS

There is a large variation in SW depending on the height level within the sinus and on tooth position, which does not permit a simple/meaningful classification of each sinus as "narrow," "average," or "wide." Nevertheless, narrow sinuses (<10 mm) are rather prevalent in the premolar region, while wide sinuses (>15 mm) in the molar region; further, a wider and shorter residual alveolar ridge is associated with a wider SW.

Lateral Sinus Floor Elevation Performed with Trapezoidal and Modified Triangular Flap Designs: A Randomized Pilot Study of Post-Operative Pain Using Thermal Infrared Imaging

Purpose: Post-operative pain and swelling are frequently observed after sinus lift procedures. The aim of the present study was the clinical evaluation of swelling and pain of two different sinus flap lift techniques using a visual analogue scale (VAS), verbal rating scale (VRS), and infrared thermal imaging (i.e., thermography). Materials Methods: A randomized controlled trial was conducted with 15 patients (30 sinuses in total) randomly allocated into two groups. For the sinuses of Group I a trapezoidal flap was used, while for Group II a modified triangular flap without anterior release was utilized. Postoperative pain was scored by means of a 100-mm VAS ranging from 0 (no pain) to 100 (worst pain imaginable), and was recorded at 2, 4, 6 and 14 days after surgery. Swelling was recorded by a verbal rating scale (VRS) and was classified into four categories: a score of 1 referred the absence of swelling, patients with intra-oral swelling in the surgical zone scored 2, any extra-oral swelling in the surgical zone scored 3, and intense swelling exhibited by extra-oral swelling extending beyond the surgical zone scored 4. The facial temperature was recorded before and after sinus augmentation, and at 2, 4, 6, and 14 days post-surgery to check the course of healing. Results: In Group I pain intensity was recorded at 2 days after surgery with a mean score of 38.67 ± 6.4 mm. Swelling was greater at 2 and 4 days, and was absent at day 6. The facial temperature difference before and after the procedure was 4.737 &deg;C ± 0.37. In Group II the pain score were lower than in Group I (p < 0.05). The score for swelling was 2 on the first and second days, and was reduced on day 4. After the second day the difference in temperature was significantly reduced as compared to the day of surgery (0.77 &deg;C); at 2 and 4 days no difference was registered. Conclusions: The results of this clinical study show the significant effectiveness of the modified triangular flap in the sinus lift procedure for reducing pain and swelling.

New classification of maxillary sinus contours and its relation to sinus floor elevation surgery

BACKGROUND

It is complicated to select an appropriate sinus floor elevation and the procedure for sinus floor elevation lacks of consensus. Sinus contour plays an important role in choosing a surgery approach. But there are still no published articles revealing the influence of sinus contours to sinus floor elevation surgery.

PURPOSE

We propose a new classification depending on sinus contours from cone-beam computed tomography (CBCT), analyze clinical characters of different types, and investigate the relationship between sinus contours and sinus floor elevation.

MATERIALS AND METHODS

We divide sinus into five categories: narrow tapered, tapering, ovoid, square, and irregular. For the first four types, subtypes are classified into three categories: without recess, with buccal-sinus-recess (BSR), and with palate-nasal-recess (PNR). For irregular type, subtypes are classified into three categories: tooth protruding into sinus floor, irregular floor, and septa/exostosis on sinus floor. Then the distribution features of sinuses of 698 patients are described. Sinus widths are measured at second premolar, first and second molar on both sides, and are compared among different types and subtypes.

RESULTS

Narrow tapered sinus occupies 88% at second premolar sites, while tapered sinus occupies almost 50% at first and second molar sites. At second premolar and first molar sites, 62% are without recess types. While 92% are without recess types at second molar. Sinuses with BSR present in only three of 3765 sites. There is an increasing trend of sinus width from narrow tapered to irregular type. Sinus width of the group with recesses is significantly higher than the one without recess. At the end, we provide corresponding treatment recommendations for each sinus types and subtypes.

CONCLUSION

This is the first classification system that gives treatment recommendations for sinus floor elevation surgery based on sinus contours. The classification system is consistent, easy to visualize, and practicable.

New bone formation after transcrestal sinus floor elevation was influenced by sinus cavity dimensions: A prospective histologic and histomorphometric study

OBJECTIVE

The aim of this multicenter prospective study was to analyze clinically and histologically the influence of sinus cavity dimensions on new bone formation after transcrestal sinus floor elevation (tSFE).

MATERIAL AND METHODS

Patients needing maxillary sinus augmentation (residual crest height <5 mm) were treated with tSFE using xenogeneic granules. Six months later, bone-core biopsies were retrieved for histological analysis in implant insertion sites. Bucco-palatal sinus width (SW) and contact between graft and bone walls (WGC) were evaluated on cone beam computed tomography, and correlations between histomorphometric and anatomical parameters were quantified by means of forward multiple linear regression analysis.

RESULTS

Fifty consecutive patients were enrolled and underwent tSFE procedures, and forty-four were included in the final analysis. Mean percentage of newly formed bone (NFB) at 6 months was 21.2 ± 16.9%. Multivariate analysis showed a strong negative correlation between SW and NFB (R²  = .793) and a strong positive correlation between WGC and NFB (R²  = .781). Furthermore, when SW was stratified into three groups (<12 mm, 12 to 15 mm, and >15 mm), NFB percentages (36%, 13% and 3%, respectively) resulted significantly different.

CONCLUSIONS

This study represented the first confirmation based on histomorphometric data that NFB after tSFE was strongly influenced by sinus width and occurred consistently only in narrow sinus cavities (SW <12 mm, measured between buccal and palatal walls at 10-mm level, comprising the residual alveolar crest).