Platelet activation due to hemodynamic shear stresses: damage accumulation model and comparison to in vitro measurements

Influence of LVAD Cannula Outflow Graft Flow Rate and Location on Fluid-Particle Interactions and Thrombi Distribution: A Primary Numerical Study

A left ventricular assist device (LVAD) supports hemodynamics in heart failure patients. To deepen the understanding of hemodynamic changes and the movement of thrombi in the aorta, we examined three distinct LVAD blood flow rates across two implantation sites using the theory of computational fluid dynamics. Our findings revealed the complex dynamics of blood flow during cardiac systole under various scenarios. We also analyzed thrombi residence time and flow probabilities into aortic branches. Simulation results indicate that thrombi distribution in the aorta is significantly influenced by the location of the LVAD outflow graft and the flow rate. When the LVAD outflow graft is implanted into the ascending aorta, higher flow rates may reduce the risk of cerebral thrombosis. However, lower flow rates may reduce the risk of cerebral thrombosis while it is implanted into the descending aorta. The study may offer valuable insights into the LVAD implantation about the risk of cerebrovascular embolism.

Manufacturing, Processing, and Characterization of Self-Expanding Metallic Stents: A Comprehensive Review

This paper aims to review the State of the Art in metal self-expanding stents made from nitinol (NiTi), showing shape memory and superelastic behaviors, to identify the challenges and the opportunities for improving patient outcomes. A significant contribution of this paper is its extensive coverage of multidisciplinary aspects, including design, simulation, materials development, manufacturing, bio/hemocompatibility, biomechanics, biomimicry, patency, and testing methodologies. Additionally, the paper offers in-depth insights into the latest practices and emerging trends, with a special emphasis on the transformative potential of additive manufacturing techniques in the development of metal stents. By consolidating existing knowledge and highlighting areas for future innovation, this review provides a valuable roadmap for advancing nitinol stents.

Shear Stress Promotes Remodeling of Platelet Glycosylation via Upregulation of Platelet Glycosidase Activity: One More Thing

BACKGROUND

 Mechanical circulatory support (MCS) is a mainstay of therapy for advanced and end-stage heart failure. Accompanied by systemic anticoagulation, contemporary MCS has become less thrombogenic, with bleeding complications emerging as a major cause of readmission and 1-year mortality. Shear-mediated platelet dysfunction and thrombocytopenia of undefined etiology are primary drivers of MCS-related bleeding. Recently, it has been demonstrated that deprivation of platelet surface glycosylation is associated with the decline of hemostatic function, microvesiculation, and premature apoptosis. We test the hypothesis that shear stress induces remodeling of platelet surface glycosylation via upregulation of glycosidase activity, thus facilitating platelet count decline and intense microvesiculation.

METHODS

 Human gel-filtered platelets were exposed to continuous shear stress in vitro. Platelets and platelet-derived microparticles (PDMPs) were quantified via flow cytometry using size standard fluorescent nanobeads. Platelet surface glycosylation and NEU1 expression were evaluated using lectin- or immune-staining and multicolor flow cytometry; lectin blotting was utilized to verify glycosylation of individual glycoproteins. Platelet neuraminidase, galactosidase, hexosaminidase, and mannosidase activities were quantified using 4-methylumbelliferone-based fluorogenic substrates.

RESULTS

 We demonstrate that shear stress promotes selective remodeling of platelet glycosylation via downregulation of 2,6-sialylation, terminal galactose, and mannose, while 2,3-sialylation remains largely unchanged. Shear-mediated deglycosylation is partially attenuated by neuraminidase inhibitors, strongly suggesting the involvement of platelet neuraminidase in observed phenomena. Shear stress increases platelet NEU1 surface expression and potentiates generation of numerous NEU1+ PDMPs. Platelets exhibit high basal hexosaminidase and mannosidase activities; basal activities of platelet neuraminidase and galactosidase are rather low and are significantly upregulated by shear stress. Shear stress of increased magnitude and duration promotes an incremental decline of platelet count and immense microvesiculation, both being further exacerbated by neuraminidase and partially attenuated by neuraminidase inhibition.

CONCLUSION

 Our data indicate that shear stress accumulation, consistent with supraphysiologic conditions of device-supported circulation, promotes remodeling of platelet glycosylation via selective upregulation of platelet glycosidase activity. Shear-mediated platelet deglycosylation is associated with platelet count drop and increased microvesiculation, thus offering a direct link between deglycosylation and thrombocytopenia observed in device-supported patients. Based on our findings, we propose a panel of molecular markers to be used for reliable detection of shear-mediated platelet deglycosylation in MCS.

The relation between aortic morphology and transcatheter aortic heart valve thrombosis: Particle tracing and platelet activation in larger aortic roots with and without neo-sinus

Transcatheter aortic heart valve thrombosis (THVT) affects long-term valve durability, transvalvular pressure gradient and leaflet mobility. In this study, we conduct high-fidelity fluid-structure interaction simulations to perform Lagrangian particle tracing in a generic model with larger aortic diameters (THVT model) with and without neo-sinus which is compared to a model of unaffected TAVI patients (control model). Platelet activation indices are computed for each particle to assess the risk of thrombus formation induced by high shear stresses followed by flow stagnation. Particle tracing indicates that fewer particles contribute to sinus washout of the THVT model with and without neo-sinus compared to the control model (-34.9%/-34.1%). Stagnating particles in the native sinus of the THVT model show higher platelet activation indices than for the control model (+39.6% without neo-sinus, +45.3% with neo-sinus). Highest activation indices are present for particles stagnating in the neo-sinus of the larger aorta representing THVT patients (+80.2% compared to control). This fluid-structure interaction (FSI) study suggests that larger aortas lead to less efficient sinus washout in combination with higher risk of platelet activation among stagnating particles, especially within the neo-sinus. This could explain (a) a higher occurrence of thrombus formation in transcatheter valves compared to surgical valves without neo-sinus and (b) the neo-sinus as the prevalent region for thrombi in TAV. Pre-procedural identification of larger aortic roots could contribute to better risk assessment of patients and improved selection of a patient-specific anti-coagulation therapy.

A Fibrin-Thrombin Based In Vitro Perfusion System to Study Flow-Related Prosthetic Heart Valves Thrombosis

Prosthetic heart valve (PHV) replacement has increased the survival rate and quality of life for heart valve-diseased patients. However, PHV thrombosis remains a critical problem associated with these procedures. To better understand the PHV flow-related thrombosis problem, appropriate experimental models need to be developed. In this study, we present an in vitro fibrin clot model that mimics clot accumulation in PHVs under relevant hydrodynamic conditions while allowing real-time imaging. We created 3D-printed mechanical aortic valve models that were inserted into a transparent glass aorta model and connected to a system that simulates human aortic flow pulse and pressures. Thrombin was gradually injected into a circulating fibrinogen solution to induce fibrin clot formation, and clot accumulation was quantified via image analysis. The results of valves positioned in a normal versus a tilted configuration showed that clot accumulation correlated with the local flow features and was mainly present in areas of low shear and high residence time, where recirculating flows are dominant, as supported by computational fluid dynamic simulations. Overall, our work suggests that the developed method may provide data on flow-related clot accumulation in PHVs and may contribute to exploring new approaches and valve designs to reduce valve thrombosis.

Investigation of the role of von Willebrand factor in shear-induced platelet activation and functional alteration under high non-physiological shear stress

BACKGROUND

von Willebrand factor (vWF) plays a crucial role in physiological hemostasis through platelet and subendothelial collagen adhesion. However, its role in shear-induced platelet activation and functional alteration under non-physiological conditions common to blood-contacting medical devices (BCMDs) is not well investigated.

METHODS

Fresh healthy human blood was treated with an anti-vWF antibody to block vWF-GPIbα interaction. Untreated blood was used as a control. They were exposed to three levels of non-physiological shear stress (NPSS) (75, 125, and 175 Pa) through a shearing device with an exposure time of 0.5 s to mimic typical shear conditions in BCMDs. Flow cytometric assays were used to measure the expression levels of PAC-1 and P-Selectin and platelet aggregates for platelet activation and the expression levels of GPIbα, GPIIb/IIIa, and GPVI for receptor shedding. Collagen/ristocetin-induced platelet aggregation capacity was characterized by aggregometry.

RESULTS

The levels of platelet activation and aggregates increased with increasing NPSS in the untreated blood. More receptors were lost with increasing NPSS, resulting in a decreased capacity of collagen/ristocetin-induced platelet aggregation. In contrast, the increase in platelet activation and aggregates after exposure to NPSS, even at the highest level of NPSS, was significantly lower in treated blood. Nevertheless, there was no notable difference in receptor shedding, especially for GPIIb/IIIa and GPVI, between the two blood groups at the same level of NPSS. The block of vWF exacerbated the decreased capacity of collagen/ristocetin-induced platelet aggregation.

CONCLUSIONS

High NPSS activates platelets mainly by enhancing the vWF-GPIbα interaction. Platelet activation and receptor shedding induced by high NPSS likely occur through different pathways.

Shear Histories Alter Local Shear Effects on Thrombus Nucleation and Growth

Our goal was to determine the impact of physiological and pathological shear histories on platelet nucleation and thrombus growth at various local shear rates. We designed and characterized a microfluidic device capable of subjecting platelets to shear histories reaching as high as 6700 s- 1 in a single passage. Time-lapse videos of platelets and thrombi are captured using fluorescence microscopy. Thrombi are tracked, and the degree of thrombosis is evaluated through surface coverage, platelet nucleation maps, and ensemble-averaged aggregate areas and intensities. Surface coverage rates were the lowest when platelets deposited at high shear rates following a pathological shear history and were highest at low shear rates following a pathological shear history. Early aggregate area growth rates were significantly larger for thrombi developing at high shear following physiological shear history than at high shear following a pathological shear history. Aggregate vertical growth was restricted when depositing at low shear following a pathological shear history. In contrast, thrombi grew faster vertically following physiological shear histories. These results show that physiological shear histories pose thrombotic risks via volumetric growth, and pathological shear histories drastically promote nucleation. These findings may inform region-based geometries for biomedical devices and refine thrombosis simulations.

Tailoring left ventricular assist device cannula implantation using coupled multi-scale multi-objective optimization

BACKGROUND

The frequent occurrence of thromboembolic cerebral events continues to limit the widespread implementation of Ventricular Assist Devices (VAD) despite continued advancements in VAD design and anti-coagulation treatments. Recent studies point to the optimal positioning of the outflow graft (OG) as a potential mitigator of post implantation thromboembolism.

OBJECTIVE

This study aims to examine the tailoring of the OG implantation orientation with the goal of minimizing the number of thrombi reaching the cerebral vessels by means of a formal shape optimization scheme incorporated into a multi-scale hemodynamics analysis.

METHODS

A 3-D patient-specific computational fluid dynamics model is loosely coupled in a two-way manner to a 0-D lumped parameter model of the peripheral circulation. A Lagrangian particle-tracking scheme models and tracks thrombi as non-interacting solid spheres. The loose coupling between CFD and LPM is integrated into a geometric shape optimization scheme which aims to optimize an objective function that targets a drop in cerebral embolization, and an overall reduction in particle residence times.

RESULTS

The results elucidate the importance of OG anastomosis orientation and placement particularly in the case that studied particle release from the OG, as a fivefold decrease in cerebral embolization was observed between the optimal and non-optimal implantations. Another case considered particle release from the ventricle and aortic root walls, in which optimal implantation was achieved with a shallow insertion angle. Particle release from all three origins was investigated in the third case, demonstrating that the optimal configurations were generally characterized by VAD flow directed along the central lumen of the aortic arch. Because optimal configurations depended on the anatomic origin of the thrombus, it is important to determine, in clinical studies, the most likely sites of thrombus formation in VAD patients.

Comparative effectiveness and safety among different tip-design hemodialysis long-term catheters: A meta-analysis

PURPOSE

The aim of this meta-analysis is to compare effectiveness and safety among different tip-design long-term hemodialysis (HD) catheters.

MATERIALS AND METHODS

PubMed, Embase, and Cochrane Library databases were searched until 8 December 2021 to identify randomized controlled trials (RCTs) and cohort studies comparing step-tip, split-tip, or symmetrical-tip design catheters in patients undergoing HD will be included. The Cochrane Risk of Bias tool and the Newcastle-Ottawa Scale were used to evaluate the quality of RCTs and cohort studies. Data extracted from the articles were integrated to determine mean effective blood pump velocity (Qb), blood recirculation rates, secondary patency, catheter-related infection, catheter-related blood stream infection (CRBSI), thrombosis rates, and all-cause mortality for the three tip-designs. We performed meta-analysis on dichotomous outcomes using a random-effects model to evaluate risk ratios (RRs) and 95% confidence intervals (Cls). The effect sizes of continuous outcomes were reported as the mean difference (MD). Sensitivity and subgroup analyses were also performed. The study was registered in the PROSPERO (CRD42021297069).

RESULTS

Six RCTs and 11 cohort studies of 2617 individuals were included in our meta-analysis, of which 1088 individuals inserted split-tip catheters, 897 individuals inserted step-tip catheters and 650 received symmetrical-tip design catheters. Sym-tip performed better in mean Qb (MD = 43.85, 95% Cl = 18.13-69.56, p = 0.0008) than step-tip. Split-tip had better outcomes vs step-tip in blood recirculation (RR = 3.44, 95% Cl = 2.49-4.39, p < 0.00001). Sym-tip had significantly better outcomes compared with step-tip (RR = 0.28, 95%Cl = 0.09-0.81, Z = 2.34, p = 0.02) and split-tip (RR = 0.19, 95% Cl = 0.09-0.43, p < 0.0001) in thrombotic events. No significant difference was found in secondary patency, infection rates, CRBSI, and all-cause mortality among the three tip-designs.

CONCLUSION

The sym-tip of tunneled cuffed catheters performed better mean Qb, lower thrombotic events, and lower blood recirculation when blood line reversed, which may have an advantage over other two catheter-tips.

A streamlined controlled-expansion covered tapered stent for TIPS in the treatment of PHT

Transjugular intrahepatic portosystemic shunt (TIPS) relieves cirrhotic complications by reducing portacaval pressure gradient (PCG), but it lacks precision in achieving a targeted post-TIPS PCG simply through diameter adjustment of equal diameter stents. This study aimed to present a controlled-expansion, streamlined, and covered tapered stent, and examined its effects on pressure reduction compared with equal- diameter stents. Twenty-four patients who underwent standardized 8-mm stent TIPS implantation at West China Hospital from December 2017 to February 2021 were included in the current study. Virtual equal-diameter stent graft with different diameter and streamlined tapered stents were created in the post-TIPS 3-dimentional models reconstructed based on computed tomography angiography data. The numerical simulation showed that only two patients achieved targeted post-TIPS PCG consistent with the clinical invasive measurement. When 6-mm and 10-mm equal-diameter stents were employed, simulated post-TIPS PCGs for most patients remained outside the safe range, and recirculating flow was observed at the stent-portal vein anastomosis. In contrast, the use of the new streamlined taper stent resulted in post-TIPS PCGs within the 10-12 mmHg range for 17 out of 24 patients, with no recirculating flow observed at the anastomotic sites. In conclusion, the streamlined tapered stent could pose an effective solution to the problem that the big jump depressurization between two different equal-diameter stents and it would improve the hemodynamics in the region near the PV-stent anchorage. Therefore, the streamlined tapered stent may present a superior alternative for TIPS procedure.

Vibro-Acoustic Platelet Activation: An Additive Mechanism of Prothrombosis with Applicability to Snoring and Obstructive Sleep Apnea

Introduction: Obstructive sleep apnea (OSA) and loud snoring are conditions with increased cardiovascular risk and notably an association with stroke. Central in stroke are thrombosis and thromboembolism, all related to and initiaing with platelet activation. Platelet activation in OSA has been felt to be driven by biochemical and inflammatory means, including intermittent catecholamine exposure and transient hypoxia. We hypothesized that snore-associated acoustic vibration (SAAV) is an activator of platelets that synergizes with catecholamines and hypoxia to further amplify platelet activation. Methods: Gel-filtered human platelets were exposed to snoring utilizing a designed vibro-acoustic exposure device, varying the time and intensity of exposure and frequency content. Platelet activation was assessed via thrombin generation using the Platelet Activity State assay and scanning electron microscopy. Comparative activation induced by epinephrine and hypoxia were assessed individually as well as additively with SAAV, as well as the inhibitory effect of aspirin. Results: We demonstrate that snore-associated acoustic vibration is an independent activator of platelets, which is dependent upon the dose of exposure, i.e., intensity x time. In snoring, acoustic vibrations associated with low-frequency sound content (200 Hz) are more activating than those associated with high frequencies (900 Hz) (53.05% vs. 22.08%, p = 0.001). Furthermore, SAAV is additive to both catecholamines and hypoxia-mediated activation, inducing synergistic activation. Finally, aspirin, a known inhibitor of platelet activation, has no significant effect in limiting SAAV platelet activation. Conclusion: Snore-associated acoustic vibration is a mechanical means of platelet activation, which may drive prothrombosis and thrombotic risk clinically observed in loud snoring and OSA.

Shear-Mediated Platelet Microparticles Demonstrate Phenotypic Heterogeneity as to Morphology, Receptor Distribution, and Hemostatic Function

Implantable Cardiovascular Therapeutic Devices (CTD), while lifesaving, impart supraphysiologic shear stress to platelets, resulting in thrombotic and bleeding coagulopathy. We previously demonstrated that shear-mediated platelet dysfunction is associated with downregulation of platelet GPIb-IX-V and αIIbβ3 receptors via generation of Platelet-Derived MicroParticles (PDMPs). Here, we test the hypothesis that sheared PDMPs manifest phenotypical heterogeneity of morphology and receptor surface expression and modulate platelet hemostatic function. Human gel-filtered platelets were exposed to continuous shear stress. Alterations of platelet morphology were visualized using transmission electron microscopy. Surface expression of platelet receptors and PDMP generation were quantified by flow cytometry. Thrombin generation was quantified spectrophotometrically, and platelet aggregation was measured by optical aggregometry. Shear stress promotes notable alterations in platelet morphology and ejection of distinctive types of PDMPs. Shear-mediated microvesiculation is associated with the remodeling of platelet receptors, with PDMPs expressing significantly higher levels of adhesion receptors (αIIbβ3, GPIX, PECAM-1, P-selectin, and PSGL-1) and agonist receptors (P2Y12 and PAR1). Sheared PDMPs promote thrombin generation and inhibit platelet aggregation induced by collagen and ADP. Sheared PDMPs demonstrate phenotypic heterogeneity as to morphology and defined patterns of surface receptors and impose a bidirectional effect on platelet hemostatic function. PDMP heterogeneity suggests that a range of mechanisms are operative in the microvesiculation process, contributing to CTD coagulopathy and posing opportunities for therapeutic manipulation.

Advanced risk prediction for aortic dissection patients using imaging-based computational flow analysis

Patients with either a repaired or medically managed aortic dissection have varying degrees of risk of developing late complications. High-risk patients would benefit from earlier intervention to improve their long-term survival. Currently serial imaging is used for risk stratification, which is not always reliable. On the other hand, understanding aortic haemodynamics within a dissection is essential to fully evaluate the disease and predict how it may progress. In recent decades, computational fluid dynamics (CFD) has been extensively applied to simulate complex haemodynamics within aortic diseases, and more recently, four-dimensional (4D)-flow magnetic resonance imaging (MRI) techniques have been developed for in vivo haemodynamic measurement. This paper presents a comprehensive review on the application of image-based CFD simulations and 4D-flow MRI analysis for risk prediction in aortic dissection. The key steps involved in patient-specific CFD analyses are demonstrated. Finally, we propose a workflow incorporating computational modelling for personalised assessment to aid in risk stratification and treatment decision-making.

Evaluation of the Efficacy and Safety of Antiplatelet Therapeutics in Rabbits

Hemostasis is a multifactorial process that involves vasoconstriction of blood vessels, activation of the coagulation cascade, and platelet aggregation. Inappropriate activation of hemostatic processes can result in thrombosis and tissue ischemia. In patients at risk for thrombotic events, antiplatelet therapeutic agents inhibit platelet activation, thereby reducing the incidence of pathologic clot formation. Platelets are activated by several endogenous chemical mediators, including adenosine diphosphate, thrombin, and thromboxane. These activation pathways serve as attractive drug targets. The protocols described in this article are designed to evaluate the preclinical efficacy and safety of novel antiplatelet therapeutics in rabbits. Here, we provide two protocols for blood collection, two for determining platelet activation, and one for assessing bleeding safety. Together, these protocols can be used to characterize the efficacy and safety of antiplatelet agents for hemostasis. © 2023 The Authors. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Blood collection via the central ear artery Alternative Protocol 1: Blood collection via the jugular vein Basic Protocol 2: Platelet aggregation assessment via light transmission aggregometry Alternative Protocol 2: Platelet activation assessment via flow cytometry Basic Protocol 3: Determination of tongue bleeding time.

The loss of helical flow in the thoracic aorta might be an identifying marker for the risk of acute type B aortic dissection

BACKGROUND AND OBJECTIVE

The occurrence of acute type B aortic dissection (TBAD) remained unclear. This study aimed to investigate the association between flow features and hemodynamic parameters in aortas that demonstrated the risk of TBAD occurrence.

METHODS

The geometries of 15 hyperacute TBAD and 12 control patients (with healthy aorta) were reconstructed from computed tomography angiography images. Pre-TBAD models were then obtained by eliminating the dissection flaps. Flow features and hemodynamic parameters, including wall shear stress-related parameters and helicities, were compared between pre-TBAD and control models using computational fluid dynamics.

RESULTS

There were no significant differences in baseline characteristics and anatomical parameters between the two groups. Significant contralateral helical blood flow was present in the healthy thoracic aorta, while almost no helical flow was observed in the pre-TBAD group. In addition, the mean normal transverse wall shear stress (NtransWSS) was significantly higher in the pre-TBAD group (aortic arch 0.49±0.09 vs. 0.40±0.05, P = 0.04; descending aorta: 0.46±0.05 vs. 0.33±0.02, P<0.01). Moreover, a significantly negative correlation was found between helicity and NtransWSS in the descending aorta. Moreover, the location of primary tears in 12 pre-TABD subjects matched well with regions of high NtransWSS.

CONCLUSIONS

Loss of helical flow in the aortic arch and descending aorta may be a major flow feature in patients with underlying TBAD, resulting in increased flow disturbance and wall lesions.

Shear-Mediated Platelet Microparticles Demonstrate Phenotypic Heterogeneity as to Morphology, Receptor Distribution, and Hemostatic Function

Objective

Implantable cardiovascular therapeutic devices (CTD) including stents, percutaneous heart valves and ventricular assist devices, while lifesaving, impart supraphysiologic shear stress to platelets resulting in thrombotic and bleeding device-related coagulopathy. We previously demonstrated that shear-mediated platelet dysfunction is associated with downregulation of platelet GPIb-IX-V and αIIbβ3 receptors via generation of platelet-derived microparticles (PDMPs). Here, we test the hypothesis that shear-generated PDMPs manifest phenotypical heterogeneity of their morphology and surface expression of platelet receptors, and modulate platelet hemostatic function.

Approach and Results

Human gel-filtered platelets were exposed to continuous shear stress and sonication. Alterations of platelet morphology were visualized using transmission electron microscopy. Surface expression of platelet receptors and PDMP generation were quantified by flow cytometry. Thrombin generation was quantified spectrophotometrically, and platelet aggregation in plasma was measured by optical aggregometry. We demonstrate that platelet exposure to shear stress promotes notable alterations in platelet morphology and ejection of several distinctive types of PDMPs. Shear-mediated microvesiculation is associated with the differential remodeling of platelet receptors with PDMPs expressing significantly higher levels of both adhesion (α _IIb β ₃ , GPIX, PECAM-1, P-selectin, and PSGL-1) and agonist-evoked receptors (P ₂ Y ₁₂ & PAR1). Shear-mediated PDMPs have a bidirectional effect on platelet hemostatic function, promoting thrombin generation and inhibiting platelet aggregation induced by collagen and ADP.

Conclusions

Shear-generated PDMPs demonstrate phenotypic heterogeneity as to morphologic features and defined patterns of surface receptor alteration, and impose a bidirectional effect on platelet hemostatic function. PDMP heterogeneity suggests that a range of mechanisms are operative in the microvesiculation process, contributing to CTD coagulopathy and posing opportunities for therapeutic manipulation.

Shear stimulated red blood cell microparticles: Effect on clot structure, flow and fibrinolysis

BACKGROUND

Microparticles (MPs) have activity in thrombus promotion and generation. Erythrocyte microparticles (ErMPs) have been reported to accelerate fibrinolysis in the absence of permeation. We hypothesized that shear induced ErMPs would affect fibrin structure of clots and change flow with implications for fibrinolysis.

OBJECTIVE

To determine the effect of ErMPs on clot structure and fibrinolysis.

METHODS

Plasma with elevated ErMPs was isolated from whole blood or from washed red blood cells (RBCs) resuspended in platelet free plasma (PFP) after high shear. Dynamic light scattering (DLS) provided size distribution of ErMPs from sheared samples and unsheared PFP controls. Clots were formed by recalcification for flow/lysis experiments and examined by confocal microscopy and SEM. Flow rates through clots and time-to-lysis were recorded. A cellular automata model showed the effect of ErMPs on fibrin polymerization and clot structure.

RESULTS

Coverage of fibrin increased by 41% in clots formed from plasma of sheared RBCs in PFP over controls. Flow rate decreased by 46.7% under a pressure gradient of 10 mmHg/cm with reduction in time to lysis from 5.7 ± 0.7 min to 12.2 ± 1.1 min (p < 0.01). Particle size of ErMPs from sheared samples (200 nm) was comparable to endogenous microparticles.

CONCLUSIONS

ErMPs alter the fibrin network in a thrombus and affect hydraulic permeability resulting in decelerated delivery of fibrinolytic drugs.

Hemodynamic Analysis of the Geometric Features of Side Holes Based on GDK Catheter

Hemodialysis is an important means to maintain life in patients with end-stage renal disease (ESRD). Approximately 76.8% of patients who begin hemodialysis do so through catheters, which play vital roles in the delivery of hemodialysis to patients. During the past decade, the materials, structures, and surface-coating technologies of catheters have constantly been evolving to ameliorate catheter-related problems, such as recirculation, thrombosis, catheter-related infections, and malfunction. In this study, based on the commercial GDK catheter, six catheter models (GDK, GDK1, GDK2, GDK3, GDK4, and GDK5) with different lumen diameters and different geometric features of side holes were established, and computational flow dynamics (CFD) were used to measure flow rate, shear stress, residence time (RT), and platelet lysis index (PLI). These six catheters were then printed with polycarbonate PC using 3D printing technology to verify recirculation rates. The results indicated that: (1) the catheter with a 5.5 mm outer diameter had the smallest average shear stress in the arterial lumen and the smallest proportion of areas with shear stress > 10 pa. With increasing catheter diameter, the shear stress in the tip volume became lower, the average RT increased, and the PLI decreased due to larger changes in shear stress; (2) the catheters with oval-shaped side holes had smaller shear stress levels than those with circular-shaped holes, indicating that the oval design was more effective; (3) the catheter with parallel dual side holes had uniformly distributed flow around side holes and exhibited lower recirculation rates in both forward and reverse connections, while linear multi-side holes had higher shear stress levels due to the large differences in flow around side holes. The selection of the material and the optimization of the side holes of catheters have significant impacts on hemodynamic performances and reduce the probability of thrombosis, thus improving the efficiency of dialysis. This study would provide some guidance for optimizing catheter structures and help toward the commercialization of more efficient HD catheters.

Patient specific approach to analysis of shear-induced platelet activation in haemodialysis arteriovenous fistula

Shear-induced platelet activation (SIPAct) is an important mechanism of thrombosis initiation under high blood flow. This mechanism relies on the interaction of platelets with the von Willebrand factor (VWF) capable of unfolding under high shear stress. High shear stress occurs in the arteriovenous fistula (AVF) commonly used for haemodialysis. A novel patient-specific approach for the modelling of SIPAct in the AVF was proposed. This enabled us to estimate the SIPAct level via computational fluid dynamics. The suggested approach was applied for the SIPAct analysis in AVF geometries reconstructed from medical images. The approach facilitates the determination of the SIPAct level dependence on both biomechanical (AVF flow rate) and biochemical factors (VWF multimer size). It was found that the dependence of the SIPAct level on the AVF flow rate can be approximated by a power law. The critical flow rate was a decreasing function of the VWF multimer size. Moreover, the critical AVF flow rate highly depended on patient-specific factors, e.g., the vessel geometry. This indicates that the approach may be adopted to elucidate patient-specific thrombosis risk factors in haemodialysis patients.

Fluid-Structure Interaction Simulations of Repaired Type A Aortic Dissection: a Comprehensive Comparison With Rigid Wall Models

This study aimed to evaluate the effect of aortic wall compliance on intraluminal hemodynamics within surgically repaired type A aortic dissection (TAAD). Fully coupled two-way fluid-structure interaction (FSI) simulations were performed on two patient-specific post-surgery TAAD models reconstructed from computed tomography angiography images. Our FSI model incorporated prestress and different material properties for the aorta and graft. Computational results, including velocity, wall shear stress (WSS) and pressure difference between the true and false lumen, were compared between the FSI and rigid wall simulations. It was found that the FSI model predicted lower blood velocities and WSS along the dissected aorta. In particular, the area exposed to low time-averaged WSS ( ≤ 0.2   P a ) was increased from 21 cm2 (rigid) to 38 cm2 (FSI) in patient 1 and from 35 cm2 (rigid) to 144 cm2 (FSI) in patient 2. FSI models also produced more disturbed flow where much larger regions presented with higher turbulence intensity as compared to the rigid wall models. The effect of wall compliance on pressure difference between the true and false lumen was insignificant, with the maximum difference between FSI and rigid models being less than 0.25 mmHg for the two patient-specific models. Comparisons of simulation results for models with different Young's moduli revealed that a more compliant wall resulted in further reduction in velocity and WSS magnitudes because of increased displacements. This study demonstrated the importance of FSI simulation for accurate prediction of low WSS regions in surgically repaired TAAD, but a rigid wall computational fluid dynamics simulation would be sufficient for prediction of luminal pressure difference.

Models of Shear-Induced Platelet Activation and Numerical Implementation With Computational Fluid Dynamics Approaches

Shear-induced platelet activation is one of the critical outcomes when blood is exposed to elevated shear stress. Excessively activated platelets in the circulation can lead to thrombus formation and platelet consumption, resulting in serious adverse events such as thromboembolism and bleeding. While experimental observations reveal that it is related to the shear stress level and exposure time, the underlying mechanism of shear-induced platelet activation is not fully understood. Various models have been proposed to relate shear stress levels to platelet activation, yet most are modified from the empirically calibrated power-law model. Newly developed multiscale platelet models are tested as a promising approach to capture a single platelet's dynamic shape during activation, but it would be computationally expensive to employ it for a large-scale analysis. This paper summarizes the current numerical models used to study the shear-induced platelet activation and their computational applications in the risk assessment of a particular flow pattern and clot formation prediction.

Is Implantable Cardioverter Defibrillator surgery in patients with an implanted left ventricular assist device safe under uninterrupted oral anticoagulation?

BACKGROUND

Implantable Cardioverter-Defibrillator (ICD) surgery in patients with implanted left ventricular assist devices (LVAD) is associated with an increased risk of bleeding complications because of the need to ensure that these patients are adequately anticoagulated. Our study aimed to evaluate the safety of our new strategy of uninterrupted oral anticoagulation compared to heparin-bridging during the surgical interval.

METHODS

Between 01/2009 and 01/2020, 116 patients with LVAD underwent ICD surgery. Since 01/2015, 60 patients were operated under continued sufficient oral anticoagulation with a vitamin k antagonist (VKA group). Fifty-six patients underwent a heparin-bridging regimen (heparin group). Demographics, perioperative data, complications, and mortality were analyzed.

RESULTS

Bleeding complications attributable to the surgical intervention occurred more often (19.6% vs. 10.0%, p=0.142) and at a higher rate of re-exploratory surgery (14.3 % vs. 5.0%, p=0.088) in the heparin group without reaching statistical significance. Moreover, the heparin group patients' postoperative total length of stay was 10 days longer. (17.8 ± 23.8 days vs. 8.3 ± 9.5 days, p=0.007). There were no procedure-related deaths, no thromboembolic events, and no LVAD-related thrombosis.

CONCLUSION

Our strategy of uninterrupted oral anticoagulation is safe and results in a reduction by more than half the number of days in hospital without an increase in adverse events.

Trends in Transfemoral Aortic Valve Implantation Related Thrombocytopenia

Background: TAVI related thrombocytopenia (TAVI-rTP) is still very common. The aim of this study was to compare the incidence, characteristics and impact of reduced platelet counts (RPC) after TAVI between an earlier and contemporary period. Methods: the patients enrolled were those experiencing severe symptomatic aortic stenosis who underwent TAVI between January 2010 and December 2019. The exclusion criteria were no available blood tests and periprocedural death. Results: 334 patients (mean age 81.9 ± 6.7 years) were enrolled. For the earlier period, the mean RPC was 33 ± 15%, and in the contemporary period (2016–2019) it was 26 ± 14%. In the early group, we found that 62% of the patients had decreased platelet counts of more or equal to 30% in comparison to 33% in the contemporary period. The time of the procedure and the amount of the contrast that had been used in the later period were associated with significant RPCs (p value = 0.002 and 0.028, respectively). An RPC of 30% or more was associated with the increased risks of life-threatening bleeding, vascular complications and death within 30 days. Conclusion: contemporary TAVI-rTP continued to be a common phenomenon in our cohort. However, severe thrombocytopenia was significantly less frequent. An RPC of 30% or more is associated with a poor 30-day outcome.

Ramifications of Vorticity on Aggregation and Activation of Platelets in Bi-Leaflet Mechanical Heart Valve: Fluid-Structure-Interaction Study

Bileaflet Mechanical Heart Valves (BMHV) are widely implanted to replace diseased heart valves. Despite many improvements in design, these valves still suffer from various complications, such as valve dysfunction, tissue overgrowth, hemolysis, and thromboembolism. Thrombosis and thromboembolism are believed to be initiated by platelet activation due to contact with foreign surfaces and non-physiological flow patterns. The implantation of the valve causes non-physiological patterns of vortex shedding behind the leaflets. The present study signifies the importance of vorticity in platelet activation and aggregation in BMHV implants. A two-phase model with the first Eulerian phase for blood and the second Discrete phase for platelets are used here. The generalized cross model of viscosity has been used to simulate the non-Newtonian viscosity of blood. A Fluid-Structure-Interaction model has been used to simulate the motion of leaflets. The present study has also estimated Platelet Activation State (PAS), which is the mathematical estimation of the degree of activation of platelets due to flow-induced shear stresses that cause thrombus formation. The regions in the fluid domain with a higher vorticity field have been found to contain platelets with relatively higher PAS than regions with relatively lower vorticity fields. Also, this study has quantitatively reported the effect of vorticity on platelet aggregation. The densities of platelets in the fluid areas with higher vorticity fields are higher than densities in the fluid regions with relatively lower vorticity fields, which indicate aggregation of highly activated platelets in areas with somewhat higher vorticity.

An Accelerated Thrombosis Model for Computational Fluid Dynamics Simulations in Rotary Blood Pumps

Purpose

Thrombosis ranks among the major complications in blood-carrying medical devices and a better understanding to influence the design related contribution to thrombosis is desirable. Over the past years many computational models of thrombosis have been developed. However, numerically cheap models able to predict localized thrombus risk in complex geometries are still lacking. The aim of the study was to develop and test a computationally efficient model for thrombus risk prediction in rotary blood pumps.

Methods

We used a two-stage approach to calculate thrombus risk. The first stage involves the computation of velocity and pressure fields by computational fluid dynamic simulations. At the second stage, platelet activation by mechanical and chemical stimuli was determined through species transport with an Eulerian approach. The model was compared with existing clinical data on thrombus deposition within the HeartMate II. Furthermore, an operating point and model parameter sensitivity analysis was performed.

Results

Our model shows good correlation (R² > 0.93) with clinical data and identifies the bearing and outlet stator region of the HeartMate II as the location most prone to thrombus formation. The calculation of thrombus risk requires an additional 10–20 core hours of computation time.

Conclusion

The concentration of activated platelets can be used as a surrogate and computationally low-cost marker to determine potential risk regions of thrombus deposition in a blood pump. Relative comparisons of thrombus risk are possible even considering the intrinsic uncertainty in model parameters and operating conditions.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13239-021-00606-y.

Continuum modeling of thrombus formation and growth under different shear rates

Obstruction of blood flow due to thrombosis is a major cause of ischemic stroke, myocardial infarction, and in severe cases, mortality. In particular, in blood wetting medical devices, thrombosis is a common reason for failure. The prediction of thrombosis by understanding signaling pathways using computational models, lead to identify the risk of thrombus formation in blood-contacting devices and design improvements. In this study, a mathematical model of thrombus formation and growth is presented. A biochemical model of platelet activation and aggregation is developed to predict thrombus size and shape at the site of vascular injury. Computational fluid dynamics using the finite volume method is employed to compute the velocity and pressure fields which are influenced by the growing thrombi. The passive transport of platelets, agonists, the platelet activation kinetics, their adhesion to the growing thrombi and embolization of platelets are solved by a fully coupled set of convection-diffusion-reaction equations. The thrombogenic surface representing blood-contacting material or injured blood vessel was incorporated into the model as a surface flux boundary condition to initiate thrombus formation. The blood is considered as a Newtonian fluid, while the thrombus is treated as a porous medium. The results are compared with in vitro experiments of a microfluidic chamber at an initial inlet venous shear rate of 200s^-1 using a pressure-inlet boundary condition. The thrombus development due to agonist concentrations and change in the shear rate as well as thromboembolism for this benchmark problem is successfully computed. Furthermore, to extend the current model to a physiologically relevant configuration, thrombus formation in a blood tube is simulated. Two different heterogeneous reaction rates for platelet aggregation are used to simulate thrombus growth under a constant inlet flow rate. The findings show that the thrombus shape can be substantially altered by the hemodynamic conditions, increase in the shear rate and due to the combined effects of shear induced platelet activation and the heterogeneous reaction rates. It is also concluded that the model is able to predict thrombus formation in different physiological and pathological hemodynamics.

Novel, Emerging Chip Models of the Blood-Brain Barrier and Future Directions

The use of microfluidic chips is now allowing for more advanced modelling of the blood-brain barrier (BBB) in vitro, recapitulating heterotypic interactions, 3D architecture, and physiological flow. This chapter will give an introduction to these new technologies and how they are being applied to model the BBB and neurovascular unit (NVU). A foundational understanding of the fluid dynamics germane to the effective use of these chips will be set and an overview of how physical phenomena at the microscale can be exploited to enable new possibilities to control the cell culture environment. The four main approaches to construct microfluidic blood vessel mimetics will be discussed with examples of how these techniques are being applied to model the BBB and more recently to study specific neurovascular disease processes. Finally, practical guidance will be given for researchers wishing to adopt these new techniques along with a summary of the challenges, limitations faced, and new opportunities opened up by these advanced cell culture systems.

Blood Pumps for Extracorporeal Membrane Oxygenation: Platelet Activation During Different Operating Conditions

Extracorporeal membrane oxygenation (ECMO) is a therapy used in severe cardiopulmonary failure. Blood is pumped through an artificial circuit exposing it to nonphysiologic conditions, which promote platelet activation and coagulation. Centrifugal pumps used at lower flow rates than their design point may lose pump efficiency and increase the risk of hemolysis. In this study, thrombogenic properties of two ECMO pumps designed for adult and neonatal use were evaluated using simulations in different flow scenarios. Three scenarios, adult pump in adult mode (4 L/min), adult pump in baby mode (300 ml/min), and neonatal pump used in its design point (300 ml/min), were simulated using computational fluid dynamics. The flow was numerically seeded with platelets, whose activation state was computed considering the stress history that acted along their respective path lines. Statistical distributions of activation state and residence time were drawn. The results showed that using the adult pump in baby mode increased the fraction of platelets with higher activation state confirming that low-pump flow rate impacts thrombogenicity. The neonatal pump showed a backflow at the inlet, which carried platelets in a retrograde motion contributing to an increased thrombogenic potential compared with the adult mode scenario.

Discrete responses of erythrocytes, platelets, and von Willebrand factor to shear

Despite decades of technological advancements in blood-contacting medical devices, complications related to shear flow-induced blood trauma are still frequently observed in clinic. Blood trauma includes haemolysis, platelet activation, and degradation of High Molecular Weight von Willebrand Factor (HMW vWF) multimers, all of which are dependent on the exposure time and magnitude of shear stress. Specifically, accumulating evidence supports that when blood is exposed to shear stresses above a certain threshold, blood trauma ensues; however, it remains unclear how various constituents of blood are affected by discrete shears experimentally. The aim of this study was to expose blood to discrete shear stresses and evaluate blood trauma indices that reflect red cell, platelet, and vWF structure. Citrated human whole blood (n = 6) was collected and its haematocrit was adjusted to 30 ± 2% by adding either phosphate buffered saline (PBS) or polyvinylpyrrolidone (PVP). Viscosity of whole blood was adjusted to 3.0, 12.5, 22.5 and 37.5 mPa·s to yield stresses of 3, 6, 9, 12, 50, 90 and 150 Pa in a custom-developed shearing system. Blood samples were exposed to shear for 0, 300, 600 and 900 s. Haemolysis was measured using spectrophotometry, platelet activation using flow cytometry, and HMW vWF multimer degradation was quantified with gel electrophoresis and immunoblotting. For tolerance to 300, 600 and 900 s of exposure time, the critical threshold of haemolysis was reached after blood was exposed to 90 Pa for 600 s (P < 0.05), platelet activation and HMW vWF multimer degradation were 50 Pa for 600 s and 12 Pa for 300 s respectively (P < 0.05). Our experimental results provide simultaneous comparison of blood trauma indices and thus also the relation between shear duration and magnitude required to induce damage to red cells, platelets, and vWF. Our results also demonstrate that near-physiological shear stress (<12 Pa) is needed in order to completely avoid any form of blood trauma. Therefore, there is an urgent need to design low shear-flow medical devices in order to avoid blood trauma in this blood-contacting medical device field.

Shear-Mediated Platelet Activation is Accompanied by Unique Alterations in Platelet Release of Lipids

INTRODUCTION

Platelet activation by mechanical means such as shear stress exposure, is a vital driver of thrombotic risk in implantable blood-contacting devices used in the treatment of heart failure. Lipids are essential in platelets activation and have been studied following biochemical activation. However, little is known regarding lipid alterations occurring with mechanical shear-mediated platelet activation.

METHODS

Here, we determined if shear-activation of platelets induced lipidome changes that differ from those associated with biochemically-mediated platelet activation. We performed high-resolution lipidomic analysis on purified platelets from four healthy human donors. For each donor, we compared the lipidome of platelets that were non-activated or activated by shear, ADP, or thrombin treatment.

RESULTS

We found that shear activation altered cell-associated lipids and led to the release of lipids into the extracellular environment. Shear-activated platelets released 21 phospholipids and sphingomyelins at levels statistically higher than platelets activated by biochemical stimulation.

CONCLUSIONS

We conclude that shear-mediated activation of platelets alters the basal platelet lipidome. Further, these alterations differ and are unique in comparison to the lipidome of biochemically activated platelets. Many of the released phospholipids contained an arachidonic acid tail or were phosphatidylserine lipids, which have known procoagulant properties. Our findings suggest that lipids released by shear-activated platelets may contribute to altered thrombosis in patients with implanted cardiovascular therapeutic devices.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s12195-021-00692-x.

Mathematical and Computational Modeling of Device-Induced Thrombosis

Given the extensive and routine use of cardiovascular devices, a major limiting factor to their success is the thrombotic rate that occurs. This both poses direct risk to the patient and requires counterbalancing with anticoagulation and other treatment strategies, contributing additional risks. Developing a better understanding of the mechanisms of device-induced thrombosis to aid in device design and medical management of patients is critical to advance the ubiquitous use and durability. Thus, mathematical and computational modelling of device-induced thrombosis has received significant attention recently, but challenges remain. Additional areas that need to be explored include microscopic/macroscopic approaches, reconciling physical and numerical timescales, immune/inflammatory responses, experimental validation, and incorporating pathologies and blood conditions. Addressing these areas will provide engineers and clinicians the tools to provide safe and effective cardiovascular devices.

In-silico analysis of outflow graft implantation orientation and cerebral thromboembolism incidence for full LVAD support

We investigate tailoring cannula implantation angles of left ventricle assist devices (LVAD) to reduce cerebral embolism risk for full LVAD support. We resolve pulsatile hemodynamics with a multi-scale computational fluid dynamics model coupled to a Lagrangian scheme tracking 2-5 mm particles for three cannula implantations. Blood is modeled as non-Newtonian. Cerebral flow distribution is altered depending on anastomosis angle and comparison of means embolization rates between steady and unsteady flow models show that unsteady modeling is more accurate even in the full LVAD support case. Intermediate angle implantation yields lowest cerebral embolization incidence of 11% vs 29% for normal and 36% for shallow implantation.

The effect of turbulence modelling on the assessment of platelet activation

Pathological platelet activation by abnormal shear stresses is regarded as a main clinical complication in recipients of cardiovascular mechanical devices. In order to improve their performance computational fluid dynamics (CFD) are used to evaluate flow fields and related shear stresses. CFD models are coupled with mathematical models that describe the relation between fluid dynamics variables, and in particular shear stresses, and the platelet activation state (PAS). These models typically use a Lagrangian approach to compute the shear stresses along possible platelet trajectories. However, in the case of turbulent flow, the choice of the proper turbulence closure is still debated for both concerning its effect on shear stress calculation and Lagrangian statistics. In this study different numerical simulations of the flow through a mechanical heart valve were performed and then compared in terms of Eulerian and Lagrangian quantities: a direct numerical simulation (DNS), a large eddy simulation (LES), two Reynolds-averaged Navier-Stokes (RANS) simulations (SST k-ω and RSM) and a "laminar" (no turbulence modelling) simulation. Results exhibit a large variability in the PAS assessment depending on the turbulence model adopted. "Laminar" and RSM estimates of platelet activation are about 60% below DNS, while LES is 16% less. Surprisingly, PAS estimated from the SST k- ω velocity field is only 8% less than from DNS data. This appears more artificial than physical as can be inferred after comparing frequency distributions of PAS and of the different Lagrangian variables of the mechano-biological model of platelet activation. Our study indicates how much turbulence closures may affect platelet activation estimates, in comparison to an accurate DNS, when assessing blood damage in blood contacting devices.

Thrombosis and Hemodynamics: external and intrathrombus gradients

Distinct from dilute, isotropic, and homogeneous reaction systems typically used in laboratory kinetic assays, blood is concentrated, two-phase, flowing, and highly anisotropic when clotting on a surface. This review focuses on spatial gradients that are generated and can dictate thrombus structure and function. Novel experimental and computational tools have recently emerged to explore reaction-transport coupling during clotting. Multiscale simulations help bridge tissue length scales (the coronary arteries) to millimeter scales of a growing clot to the microscopic scale of single-cell signaling and adhesion. Microfluidic devices help create and control pathological velocity profiles, albeit at a low Reynolds number. Since rate processes and force loading are often coupled, this review highlights prevailing convective-diffusive transport physics that modulate cellular and molecular processes during thrombus formation.

A 1D-3D Hybrid Model of Patient-Specific Coronary Hemodynamics

PURPOSE

Coronary flow is affected by evolving events such as atherosclerotic plaque formation, rupture, and thrombosis, resulting in myocardial ischemia and infarction. Highly resolved 3D hemodynamic data at the stenosis is essential to model shear-sensitive thrombotic events in coronary artery disease.

METHODS

We developed a hybrid 1D-3D simulation framework to compute patient-specific coronary hemodynamics efficiently. A 1D model of the coronary flow is coupled to an image-based 3D model of the region of interest. This framework affords the advantages of reduced-order modeling, decreasing the global computational cost, without sacrificing the accuracy of the quantities of interest.

RESULTS

We validated our 1D-3D model against full 3D coronary simulations in healthy and diseased conditions. Our results showed good agreement between the 3D and the 1D-3D models while reducing the computational cost by 40-fold compared to the 3D simulation. The 1D-3D model predicted left/right coronary flow distribution within 3% and provided an accurate estimation of fractional flow reserve and wall shear stress distribution at the stenosis comparable to the 3D simulation.

CONCLUSION

Savings in computational cost may be significant in situations with changing geometry, such as growing thrombosis. Also, this approach would allow quantifying the time-dependent effect of thrombotic growth and occlusion on the global coronary circulation.

Computational modeling of blood component transport related to coronary artery thrombosis in Kawasaki disease

Coronary artery thrombosis is the major risk associated with Kawasaki disease (KD). Long-term management of KD patients with persistent aneurysms requires a thrombotic risk assessment and clinical decisions regarding the administration of anticoagulation therapy. Computational fluid dynamics has demonstrated that abnormal KD coronary artery hemodynamics can be associated with thrombosis. However, the underlying mechanisms of clot formation are not yet fully understood. Here we present a new model incorporating data from patient-specific simulated velocity fields to track platelet activation and accumulation. We use a system of Reaction-Advection-Diffusion equations solved with a stabilized finite element method to describe the evolution of non-activated platelets and activated platelet concentrations [AP], local concentrations of adenosine diphosphate (ADP) and poly-phosphate (PolyP). The activation of platelets is modeled as a function of shear-rate exposure and local concentration of agonists. We compared the distribution of activated platelets in a healthy coronary case and six cases with coronary artery aneurysms caused by KD, including three with confirmed thrombosis. Results show spatial correlation between regions of higher concentration of activated platelets and the reported location of the clot, suggesting predictive capabilities of this model towards identifying regions at high risk for thrombosis. Also, the concentration levels of ADP and PolyP in cases with confirmed thrombosis are higher than the reported critical values associated with platelet aggregation (ADP) and activation of the intrinsic coagulation pathway (PolyP). These findings suggest the potential initiation of a coagulation pathway even in the absence of an extrinsic factor. Finally, computational simulations show that in regions of flow stagnation, biochemical activation, as a result of local agonist concentration, is dominant. Identifying the leading factors to a pro-coagulant environment in each case—mechanical or biochemical—could help define improved strategies for thrombosis prevention tailored for each patient.

Computational studies aiming to model thrombosis often rely on an arterial wall injury. Collagen and other extracellular matrix components are exposed to the bloodstream, which facilitates platelet adhesion to the wall and subsequent clot formation. However, these models are not adequate to explain thrombosis in other settings where even in the absence of a focal lesion, clots may still form under certain flow conditions. Coronary artery aneurysm thrombosis following KD is an example of the need to understand the mechanisms of thrombus initiation in the absence of an extrinsic factor. This study provides a new framework to investigate thrombus initiation in KD from a patient-specific perspective, which integrates fluid mechanics and biochemistry and which could help quantify the pro-coagulant environment induced by the aneurysm and become a predictive tool. The work presented here has broad relevance to other clinical situations where flow stagnation and transport are driving factors in thrombus formation.

Computational Fluid Dynamics Study of Cerebral Thromboembolism Risk in Ventricular Assist Device Patients: Effects of Pulsatility and Thrombus Origin

This study investigates the hypothesis that by surgically manipulating the outflow graft (OG) implantation during ventricle assist device placement, it may be possible to reduce the risk of cerebral embolism. We investigate this hypothesis using a computational approach on a patient-specific basis under fully pulsatile hemodynamics with a multiscale computational fluid dynamics model incorporating a coupled Eulerian-Lagrangian scheme that effectively tracks emboli in the fluid domain. Blood is modeled as a non-Newtonian fluid based on the hematocrit level. Preliminary flow analysis shows that depending on the anastomosis angle the left ventricular assist device (LVAD) can enhance the flow to the cerebral circulation by nearly 31%. Z-test results suggest that unsteady-flow modeling ought to be an integral part of any cardiovascular simulation with residual ventricular function. Assuming unsteady-flow conditions, a shallow LVAD outflow graft anastomosis angle is the most optimal if thrombi are released from the aortic-root reducing cerebral embolization incidence to 15.5% and from the ventricle to 17%, while a more pronounced anastomosis angle becomes advantageous when particles originate from the LVAD with an embolization rate of 16.9%. Overall, computations suggest that a pronounced LVAD anastomosis angle is the better implementation. Unsteady modeling is shown to be necessary for the presence of significant antegrade aortic-root flow which induces cyclical flow patterns due to residual pulsatility. On the other hand, depending on thrombus origin and ventricular assist devices (VAD) anastomosis angle there is a strong tradeoff in embolization rates.

Development of New Hemodialysis Catheter Using Numerical Analysis and Experiments

A hemodialysis (HD) catheter, especially one with a symmetric tip design, plays an important role in the long-term treatment of patients with renal failure. It is well known that the design of the HD catheter has a considerable effect on blood recirculation and thrombus formation around it, which may cause inefficiencies or malfunctions during HD. However, hemodynamic analyses through parametric studies of its designs have been rarely performed; moreover, only comparisons between the existing models have been reported. In this study, we numerically analyzed the design of the HD catheter's side hole and distal tip for evaluating their effects on hemodynamic factors such as recirculation rate (RR), shear stress, and blood damage index (BDI). The results indicated that a larger side hole and a nozzle-shaped distal tip can significantly reduce the RR and shear stress around the HD catheter. Furthermore, based on these hemodynamic insights, we proposed three new HD catheter designs and compared their performances with existing catheters using numerical and in vitro methods. These new designs exhibited lower RRs and BDI values, thus providing better performance than the existing models. These results can help toward commercialization of more efficient HD catheters.

Contemporary transcatheter aortic valve implantation related thrombocytopenia

BACKGROUND

Transcatheter aortic valve implantation related thrombocytopenia (TAVI-rTP) is an inevitable phenomenon. However, no study has been performed on TAVI-rTP in the current setting of extended clinical indications combined with technology improvements.

METHODS

Patients with severe symptomatic aortic stenosis who underwent transfemoral TAVI, from January 2016 to December 2019 were enrolled.

RESULTS

Two-hundred and one consecutive patients (mean age 81.1 ± 7.1 years, 96 men) enrolled. Platelet count was recorded before and after aortic valve implantation. Dropped platelet count (DPC) occurred in all but 11 patients who were included. Two groups were created: DPC <30 and DPC ≥30%. DPC was compared with in-hospital major adverse cardiovascular events. The mean DPC was 26 ± 14%. We found that 67 patients (33.3%) had DPC of more or equal to 30%. In the univariable analysis, the time of the procedure (94.4 ± 32.7 vs 79.4 ± 21.9, p = .002), the amount of the contrast used (125.4 ± 55.4 vs 108.4 ± 44.1, p = .02) and the residual AV gradient (13.3 ± 7.2 vs 14.7, p = .05) were related to a DCP ≥30%. A DPC ≥30% was associated with increased risk of life-threatening/major bleeding (11.9% vs 1.5%, p = .001), major vascular complications (16.4% vs 5.2% p = .009) and death (3.0% vs 0%, p = .044) at 30 days. After multivariable analysis, the factors associated with a higher DPC were time and contrast.

CONCLUSION

Contemporary TAVI-rTP in this cohort of patients continues to be a common phenomenon but severe thrombocytopenia is less frequent. Patients developing a DPC ≥30% are associated with poor outcomes at 30 days.

Tethered Liquid Perfluorocarbon Coating for 72 Hour Heparin-Free Extracorporeal Life Support

Coagulopathic complications during extracorporeal life support (ECLS) result from two parallel processes: 1) foreign surface contact and shear stress during blood circulation and 2) administration of anticoagulant drugs to prevent circuit thrombosis. To address these problems, biocompatible surfaces are developed to prevent foreign surface-induced coagulopathy, reducing or eliminating the need for anticoagulants. Tethered liquid perfluorocarbon (TLP) is a nonadhesive coating that prevents adsorption of plasma proteins and thrombus deposition. We examined application of TLP to complete ECLS circuits (membranes, tubing, pumps, and catheters) during 72 hours of ECLS in healthy swine (n = 5/group). We compared TLP-coated circuits used without systemic anticoagulation to standard of care: heparin-coated circuits with continuous heparin infusion. Coagulopathic complications, device performance, and systemic effects were assessed. We hypothesized that TLP reduces circuit thrombosis and iatrogenic bleeding, without impeding gas exchange performance or causing untoward effects. No difference in bleeding or thrombotic complication rate was observed; however, circuit occlusion occurred in both groups (TLP = 2/5; CTRL = 1/5). TLP required elevated sweep gas rate to maintain normocapnia during ECLS versus CTRL (10-20 vs. 5 L/min; p = 0.047), suggesting impaired gas exchange. Thrombus deposition and protein adhesion on explanted membranes were comparable, and TLP did not preserve platelet or blood cell counts relative to controls. We conclude that neither TLP nor standard of care is an efficacious solution to prevent coagulation disturbances during ECLS. Further testing of promising biomaterials for ECLS utilizing the model outlined here is warranted.

Platelet adhesion potential estimation in a normal and diseased coronary artery model: effects of shear stress magnitude versus shear stress history

Platelets play a salient role in the pathogenesis of coronary diseases; primarily through their adhesion to other platelets, endothelial cells and plasma proteins. It is necessary for platelets to activate in order for them to adhere to these different substrates. One of the key regulatory mechanical factors in platelet activation is shear stress, which has been shown to alter multiple platelet functions through the activation of mechanoreceptors. Our goal was to investigate how different numerical shear stress tracking techniques affect platelet adhesion estimates within physiologically relevant computational models. Previously, we developed a physiological coronary artery computational fluid dynamics model. Shear stress waveforms, obtained from these models, were used to monitor in vitro platelet and endothelial cell adhesion marker expression. In this work, the adhesion marker expression data was regressed to obtain numerical functions for receptor expression predictions. These functions were input into a customized adhesion model utilizing different shear stress tracking techniques. For the normal vascular conditions and minimal pathological disease models, shear stress tracking did not significantly affect the adhesion estimates. However, for the severe pathological model, the two shear stress tracking methods had vastly different estimates. Therefore, shear stress tracking methods must be chosen accurately to predict platelet adhesion potentials for accurate modeling techniques.

Shear-mediated platelet activation in the free flow II: Evolving mechanobiological mechanisms reveal an identifiable signature of activation and a bi-directional platelet dyscrasia with thrombotic and bleeding features

Shear-mediated platelet activation (SMPA) in the "free flow" is the net result of a range of cell mechanobiological mechanisms. Previously, we outlined three main groups of mechanisms including: 1) mechano-destruction - i.e. additive platelet (membrane) damage; 2) mechano-activation - i.e. activation of shear-sensitive ion channels and pores; and 3) mechano-transduction - i.e. "outside-in" signaling via a range of transducers. Here, we report on recent advances since our original report which describes additional features of SMPA. A clear "signature" of SMPA has been defined, allowing differentiation from biochemically-mediated activation. Notably, SMPA is characterized by mitochondrial dysfunction, platelet membrane eversion, externalization of anionic phospholipids, and increased thrombin generation on the platelet surface. However, SMPA does not lead to integrin αIIbβ3 activation or P-selectin exposure due to platelet degranulation, as is commonly observed in biochemical activation. Rather, downregulation of GPIb, αIIbβ3, and P-selectin surface expression is evident. Furthermore, SMPA is accompanied by a decrease in overall platelet size coupled with a concomitant, progressive increase in microparticle generation. Shear-ejected microparticles are highly enriched in GPIb and αIIbβ3. These observations indicate the enhanced diffusion, migration, or otherwise dispersion of platelet adhesion receptors to membrane zones, which are ultimately shed as receptor-rich PDMPs. The pathophysiological consequence of this progressive shear accumulation phenomenon is an associated dyscrasia of remaining platelets - being both reduced in size and less activatable via biochemical means - a tendency to favor bleeding, while concomitantly shed microparticles are highly prothrombotic and increase the tendency for thrombosis in both local and systemic milieu. These mechanisms and observations offer direct clinical utility in allowing measurement and guidance of the net balance of platelet driven events in patients with implanted cardiovascular therapeutic devices.

Mathematical models for shear-induced blood damage based on vortex platform

Non-physiological shear stress in Ventricular Assist Device (VAD) is considered to be an important trigger of blood damage, which has become the biggest shackle for clinical application. The researches on blood damage in literature were limited to qualitative but did not make much quantitative analysis. The purpose of this study was to investigate the quantitative influence of two flow-dependent parameters: shear stress (rotational speed) and exposure time on the shear-induced damage of red blood cells and von Willebrand Factor (vWF). A vortex blood-shearing platform was constructed to conduct in vitro experiments. Free hemoglobin assay and vWF molecular weight analysis were then performed on the sheared blood samples. MATLAB was used for regression fitting of original experimental data. The quantitative correlations between the hemolysis index, the degradation of high molecular weight vWF and the two flow-dependent parameters were found both following the power law model. The mathematic models indicated that the sensitivity of blood damage on red blood cells and vWF to exposure time was both greater than that of shear stress. Besides, the damage of vWF was more serious than that of red blood cells at the same flow condition. The models could be used to predict blood damage in blood-contacting medical devices, especially for the slow even stagnant blood flow regions in VAD, thus may provide useful guidance for VAD development and improvement. It also indicated that the vortex platform can be used to study the law of blood damage for the simple structure and easy operation.

Flow Dynamics and Mixing in Extracorporeal Support: A Study of the Return Cannula

Cannulation strategies in medical treatment such as in extracorporeal life support along with the associated cannula position, orientation and design, affects the mixing and the mechanical shear stress appearing in the flow field. This in turn influences platelet activation state and blood cell destruction. In this study, a co-flowing confined jet similar to a return cannula flow configuration found in extracorporeal membrane oxygenation was investigated experimentally. Cannula diameters, flow rate ratios between the jet and the co-flow and cannula position were studied using Particle Image Velocimetry and Planar Laser Induced Fluorescence. The jet was turbulent for all but two cases, in which a transitional regime was observed. The mixing, governed by flow entrainment, shear layer induced vortices and a backflow along the vessel wall, was found to require 9–12 cannula diameters to reach a fully homogeneous mixture. This can be compared to the 22–30 cannula diameters needed to obtain a fully developed flow. Although not significantly affecting mixing characteristics, cannula position altered the development of the flow structures, and hence the shear stress characteristics.

Advances in extracorporeal membrane oxygenator design for artificial placenta technology

Extreme prematurity, defined as a gestational age of fewer than 28 weeks, is a significant health problem worldwide. It carries a high burden of mortality and morbidity, in large part due to the immaturity of the lungs at this stage of development. The standard of care for these patients includes support with mechanical ventilation, which exacerbates lung pathology. Extracorporeal life support (ECLS), also called artificial placenta technology when applied to extremely preterm (EPT) infants, offers an intriguing solution. ECLS involves providing gas exchange via an extracorporeal device, thereby doing the work of the lungs and allowing them to develop without being subjected to injurious mechanical ventilation. While ECLS has been successfully used in respiratory failure in full-term neonates, children, and adults, it has not been applied effectively to the EPT patient population. In this review, we discuss the unique aspects of EPT infants and the challenges of applying ECLS to these patients. In addition, we review recent progress in artificial placenta technology development. We then offer analysis on design considerations for successful engineering of a membrane oxygenator for an artificial placenta circuit. Finally, we examine next-generation oxygenators that might advance the development of artificial placenta devices.

Platelet Dysfunction During Mechanical Circulatory Support: Elevated Shear Stress Promotes Downregulation of αIIbβ3 and GPIb via Microparticle Shedding Decreasing Platelet Aggregability

[Figure: see text].

Thrombocytopenia: Perioperative Considerations for Patients Undergoing Cardiac Surgery

The etiologies of thrombocytopenia in patients presenting for cardiac surgery are extensive, but clinically relevant conditions generally can be categorized by those related to decreased platelet production or increased platelet destruction. Many causes require mere acknowledgment and availability of allogeneic platelet transfusion; others have unique considerations for which providers should be familiar. The purpose of this review is to provide an overview of the common causes of thrombocytopenia, summarize the literature, and discuss perioperative considerations for patients undergoing cardiac surgery.

Shear-Induced Platelet Activation is Sensitive to Age and Calcium Availability: A Comparison of Adult and Cord Blood

INTRODUCTION

Antiplatelet therapy for neonates and infants is often extrapolated from the adult experience, based on limited observation of agonist-induced neonatal platelet hypoactivity and poor understanding of flow shear-mediated platelet activation. Therefore, thrombotic events due to device-associated disturbed flow are inadequately mitigated in critically ill neonates with indwelling umbilical catheters and infants receiving cardiovascular implants.

METHODS

Whole blood (WB), platelet-rich plasma (PRP), and gel-filtered platelets (GFP) were prepared from umbilical cord and adult blood, and exposed to biochemical agonists or pathological shear stress of 70 dyne/cm2. We evaluated α-granule release, phosphatidylserine (PS) scrambling, and procoagulant response using P-selectin expression, Annexin V binding, and thrombin generation (PAS), respectively. Activation modulation due to depletion of intracellular and extracellular calcium, requisite second messengers, was also examined.

RESULTS

Similar P-selectin expression was observed for sheared adult and cord platelets, with concordant inhibition due to intracellular and extracellular calcium depletion. Sheared cord platelet Annexin V binding and PAS activity was similar to adult values in GFP, but lower in PRP and WB. Annexin V on sheared cord platelets was calcium-independent, with PAS slightly reduced by intracellular calcium depletion.

CONCLUSIONS

Increased PS activity on purified sheared cord platelets suggest that their intrinsic function under pathological flow conditions is suppressed by cell-cell or plasmatic components. Although secretory functions of adult and cord platelets retain comparable calcium-dependence, PS exposure in sheared cord platelets is uniquely calcium-independent and distinct from adults. Identification of calcium-regulated developmental disparities in shear-mediated platelet function may provide novel targets for age-specific antiplatelet therapy.

Predictors of short-term thrombocytopenia after transcatheter aortic valve implantation: a retrospective study at a single Japanese center

OBJECTIVE

Thrombocytopenia is common after transcatheter aortic valve implantation (TAVI) and is associated with mortality and major complications, although the underlying mechanisms are unclear. This retrospective single-center study aimed to identify factors associated with the decrease in platelet count (DPC) after TAVI in Japanese patients. Patients with severe aortic valve stenosis who underwent transfemoral TAVI between March 2014 and August 2019 were grouped according to DPC values of < 50% or ≥ 50% (DPC = 100% × [baseline platelet count-nadir platelet count]/[baseline platelet count]). Multivariable logistic regression analysis was performed to identify factors associated with a DPC of ≥ 50%.

RESULTS

Among the 131 patients who underwent transfemoral TAVI, 74 patients (56%) had a DPC of ≥ 50%, and 57 patients (44%) had a DPC of < 50%. Significant risk factors for a DPC of ≥ 50% were older age, lower body mass index (BMI), and use of balloon-expandable valves (BEV). The multivariable analysis revealed that a DPC of ≥ 50% was independently predicted by low BMI (adjusted odds ratio: 0.884, 95% confidence interval: 0.785-0.997; P = 0.039) and BEV use (adjusted odds ratio: 3.014, 95% confidence interval: 1.003-9.056; P = 0.045). Platelet count monitoring after TAVI, especially when using BEV devices, is essential for Japanese patients with low BMI.