Thermal management of micro-scale inorganic light-emittng diodes on an orthotropic substrate for biointegrated applications

The orthotropic material with the in-plane thermal conductivity much larger than the off-plane one can control the heat flow direction. This feature provides unique benefits in thermal management of micro-scale inorganic light-emitting diodes (μ-ILEDs) device for biointegrated applications by helping the heat dissipation from μ-ILEDs along the in-plane directions to lower the μ-ILED temperature and prevent the heat dissipation to the tissue along the off-plane direction to ensure a low tissue temperature. Three-dimensional analytical models, accounting for the coupling between the Fourier heat conduction in the μ-ILED device and the Pennes bioheat transfer in the human skin, are established to investigate the thermal behaviors of μ-ILEDs on an orthotropic substrate integrated with the human skin. Both the operations of μ-ILEDs in a constant mode and pulsed mode are studied. The maximum temperature increases of μ-ILED and in the tissue are derived and their dependences on various parameters such as the thermal conductivities of the orthotropic substrate, substrate thickness, and loading parameters (e.g., duty cycle, pulse period) are investigated. These results pave the theoretical foundation for the thermal management of μ-ILED devices for biointegrated applications.

A finite deformation model of planar serpentine interconnects for stretchable electronics

Lithographically defined interconnects with filamentary, serpentine configurations have been widely used in various forms of stretchable electronic devices, owing to the ultra-high stretchability that can be achieved and the relative simple geometry that facilitates the design and fabrication. Theoretical models of serpentine interconnects developed previously for predicting the performance of stretchability were mainly based on the theory of infinitesimal deformation. This assumption, however, does not hold for the interconnects that undergo large levels of deformations before the structural failure. Here, an analytic model of serpentine interconnects is developed starting from the finite deformation theory of planar, curved beams. Finite element analyses (FEA) of the serpentine interconnects with a wide range of geometric parameters were performed to validate the developed model. Comparisons of the predicted stretchability to the estimations of linear models provide quantitative insights into the effect of finite deformation. Both the theoretical and numerical results indicate that a considerable overestimation (e.g., > 50% relatively) of the stretchability can be induced by the linear model for many representative shapes of serpentine interconnects. Furthermore, a simplified analytic solution of the stretchability is obtained by using an approximate model to characterize the nonlinear effect. The developed models can be used to facilitate the designs of serpentine interconnects in future applications.

Mechanics and thermal management of stretchable inorganic electronics

Stretchable electronics enables lots of novel applications ranging from wearable electronics, curvilinear electronics to bio-integrated therapeutic devices that are not possible through conventional electronics that is rigid and flat in nature. One effective strategy to realize stretchable electronics exploits the design of inorganic semiconductor material in a stretchable format on an elastomeric substrate. In this review, we summarize the advances in mechanics and thermal management of stretchable electronics based on inorganic semiconductor materials. The mechanics and thermal models are very helpful in understanding the underlying physics associated with these systems, and they also provide design guidelines for the development of stretchable inorganic electronics.

Miniaturized optogenetic neural implants: a review

Optogenetics is an exciting new technology that allows targetable fast control and readout of specific neural populations in complex brain circuits. With the rapid development of light-sensitive microbial opsins, substantial gains in understanding the causal relationships between neural activity and behavior in both healthy and diseased brains have been achieved during the last decade. However, the intricate and complex interactions between different neural populations in mammalian brains require novel, implantable, neural interfaces that are capable of manipulating and probing targeted neurons at multiple sites and with high spatiotemporal resolution. Advanced microtechnology has offered the highest potential to meet these demands of optogenetic applications. In this paper, we review a variety of miniaturized optogenetic neural implants developed in recent years, based on different light sources, including lasers, laser diodes, and light-emitting diodes. We then summarize the specifications of these microimplants and their related microfabrication approaches and discuss the major challenges of current techniques and the vision for the future of the field.

Closed-loop and activity-guided optogenetic control

Advances in optical manipulation and observation of neural activity have set the stage for widespread implementation of closed-loop and activity-guided optical control of neural circuit dynamics. Closing the loop optogenetically (i.e., basing optogenetic stimulation on simultaneously observed dynamics in a principled way) is a powerful strategy for causal investigation of neural circuitry. In particular, observing and feeding back the effects of circuit interventions on physiologically relevant timescales is valuable for directly testing whether inferred models of dynamics, connectivity, and causation are accurate in vivo. Here we highlight technical and theoretical foundations as well as recent advances and opportunities in this area, and we review in detail the known caveats and limitations of optogenetic experimentation in the context of addressing these challenges with closed-loop optogenetic control in behaving animals.

Fabrication and application of flexible, multimodal light-emitting devices for wireless optogenetics

The rise of optogenetics provides unique opportunities to advance materials and biomedical engineering, as well as fundamental understanding in neuroscience. This protocol describes the fabrication of optoelectronic devices for studying intact neural systems. Unlike optogenetic approaches that rely on rigid fiber optics tethered to external light sources, these novel devices carry wirelessly powered microscale, inorganic light-emitting diodes (μ-ILEDs) and multimodal sensors inside the brain. We describe the technical procedures for construction of these devices, their corresponding radiofrequency power scavengers and their implementation in vivo for experimental application. In total, the timeline of the procedure, including device fabrication, implantation and preparation to begin in vivo experimentation, can be completed in ~3-8 weeks. Implementation of these devices allows for chronic (tested for up to 6 months) wireless optogenetic manipulation of neural circuitry in animals navigating complex natural or home-cage environments, interacting socially, and experiencing other freely moving behaviors.