Genetic and physiological analysis of biofilm formation on different plastic surfaces by Sphingomonas sp. strain S2M10 reveals an essential function of sphingan biosynthesis

The hind information: Exploring the impact of physical damage on mask microbial composition in the aquatic environment

Due to poor management and the lack of environmental awareness, lots of masks (an emerging form of plastic pollution) are discarded into the environment during the COVID-19, thereby jeopardizing the health of humans and the environment. Our study introduces a novel perspective by examining the impact of physical damage on the microbial composition of masks in the water environment. We focus on the variations in biofilm formation on each layer of both damaged and undamaged masks, which allows us to understand more about the biofilm on each layer and the significant changes that occur when masks are physically damaged. Research has shown that the community structure of microorganisms on discarded masks can be altered in just ten days, showing an evolution from undifferentiated pioneer colonizing species ("non-picky") to adaptive dominant species ("picky"). Especially, considering that discarded masks were inevitably damaged, we found that the biomass on the damaged samples is 1.62-2.38 times higher than that of the undamaged samples, respectively. Moreover, the microbial community structure on it was also significantly different. Genes involved in biogeochemical cycles of nutrients are more enriched in damaged masks. When damaged, the colonization process and community structure in the middle layer significantly differ from those in the inner and outer layers and even enrich more pathogenic bacteria. Based on the above, it is evident that the environmental risk of masks cannot be assessed as a whole, and the middle layer carries a higher risk.

Bacterial community succession and the enrichment of antibiotic resistance genes on microplastics in an oyster farm

Microplastics can be colonized by microorganisms and form plastisphere. However, knowledge of bacterial community succession and the enrichment of antibiotic resistance genes (ARGs) and pathogens on microplastics in aquaculture environments is limited. Here, we conducted a 30-day continuous exposure experiment at an oyster farm. Results showed that the alpha-diversity of communities on most microplastics continuously increased and was higher than in planktonic communities after 14 days. Microplastics could selectively enrich certain bacteria from water which can live a sessile lifestyle and promote colonization by other bacteria. The composition and function of plastisphere communities were distinct from those in the surrounding water and influenced by polymer type and exposure time. Microplastics can enrich ARGs (sul1, qnrS and blaTEM) and harbor potential pathogens (e.g., Pseudomonas aeruginosa). Therefore, microplastic pollution may pose a critical threat to aquaculture ecosystems and human health. Our study provides further insight into the ecological risks of microplastics.

Microplastics influence the fate of antibiotics in freshwater environments: Biofilm formation and its effect on adsorption behavior

Microplastics (MPs) are substrates available for biofilms colonization in natural water environments. The biofilms formation may enhance the ability of MPs to adsorb harmful contaminants. Herein, we investigated the biofilms formation of three different MPs (PVC, PA and HDPE) in simulated natural environment, and observed the chemical structure, charge property, hydrophobicity and other properties of MPs affect microbial biomass and community composition. More importantly, potential pathogens were found in all three MPs biofilms. Furthermore, the adsorption capacities of original MPs and biological aging MPs for norfloxacin (NOR) was compared. HDPE has the largest adsorption capacity for NOR, while PA has the smallest adsorption capacity for NOR. It was concluded that the formation of biofilms enhanced the adsorption of NOR by 50.60 %, 24.17 % and 46.02 % for PVC, PA and HDPE, respectively. In addition, hydrogen-bond interaction, electrostatic interaction and hydrophobic interaction were found to dominate the adsorption of NOR by MPs. Our study contributed to improve the understanding of the interactions between aging MPs and contaminants in the natural water environments, and provided essential information for ecological risk assessment of MPs.

Biofilm Structural and Functional Features on Microplastic Surfaces in Greenhouse Agricultural Soil

Microplastics (MPs) enter the soil through a variety of pathways, including plastic mulching, sludge, and organic manure application. In recent years, domestic and foreign experts and scholars have been concerned about the residues and contamination of MPs in the soil of greenhouse agriculture. In this investigation, five types of MPs including low-density polyethylene (LDPE), high-density polyethylene (HDPE), polystyrene (PS), polypropylene (PP), and polyethylene terephthalate (PET), and two concentrations (1% and 5%, w/w) were used in a 30-day external exposure test. Evidence of microbial enrichment was found on the surface of the MPs. The total amount of biofilm on the surface of MPs increased dramatically with increasing exposure time and MP concentrations. The polysaccharide content of extracellular polymers (EPS) in biofilms was significantly different, and the maximum PS1 (1% (w/w) PS) concentration was 50.17 mg/L. However, EPS protein content did not change significantly. The dominant bacteria on the surface of MPs with different types and concentrations were specific, and the relative abundance of Patescibacteria was significantly changed at the phylum level. At the genus level, Methylophaga, Saccharimonadales, and Sphingomonas dominated the flora of LDPE1 (1% (w/w) LDPE), PS1, and PET5 (5% (w/w) PET). The dominant bacteria decompose organic materials and biodegrade organic contaminants. According to the FAPROTAX functional prediction study, chemoheterotrophy and aerobic chemoheterotrophyplay a role in ecosystem processes such as carbon cycle and climate regulation. The application of LDPE1 has a greater impact on the carbon cycle. Plant development and soil nutrients in greenhouse agriculture may be influenced by the interaction between MPs and microorganisms in the growing area, while MP biofilms have an impact on the surrounding environment and pose an ecological hazard.

Hybrid Histidine Kinase WelA of Sphingomonas sp. WG Contributes to WL Gum Biosynthesis and Motility

Sphingomonas sp. WG produced WL gum with commercial utility potential in many industries. A hybrid sensor histidine kinase/response regulator WelA was identified to regulate the WL gum biosynthesis, and its function was evaluated by gene deletion strategy. The WL gum production and broth viscosity of mutant ΔwelA was only 44% and 0.6% of wild type strain at 72 h. The transcriptomic analysis of differentially expressed genes showed that WelA was mapped to CckA; ChpT, and CtrA in the CckA-ChpT-CtrA pathway was up-regulated. One phosphodiesterase was up-regulated by CtrA, and the intracellular c-di-GMP was decreased. Most genes involved in WL gum biosynthesis pathway was not significantly changed in ΔwelA except the up-regulated atrB and atrD and the down-regulated pmm. Furthermore, the up-regulated regulators ctrA, flaEY, flbD, and flaF may participate in the regulation of flagellar biogenesis and influenced motility. These results suggested that CckA-ChpT-CtrA pathway and c-di-GMP were involved in WL gum biosynthesis regulation. This work provides useful information on the understanding of molecular mechanisms underlying WL gum biosynthesis regulation.

Causes, Factors, and Control Measures of Opportunistic Premise Plumbing Pathogens—A Critical Review

This review critically analyses the chemical and physical parameters that influence the occurrence of opportunistic pathogens in the drinking water distribution system, specifically in premise plumbing. A comprehensive literature review reveals significant impacts of water age, disinfectant residual (type and concentration), temperature, pH, and pipe materials. Evidence suggests that there is substantial interplay between these parameters; however, the dynamics of such relationships is yet to be elucidated. There is a correlation between premise plumbing system characteristics, including those featuring water and energy conservation measures, and increased water quality issues and public health concerns. Other interconnected issues exacerbated by high water age, such as disinfectant decay and reduced corrosion control efficiency, deserve closer attention. Some common features and trends in the occurrence of opportunistic pathogens have been identified through a thorough analysis of the available literature. It is proposed that the efforts to reduce or eliminate their incidence might best focus on these common features.

Bifunctional nanomaterials for simultaneously improving cell adhesion and affecting bacterial biofilm formation on silicon-based surfaces

In the biomedical field, silicon-based materials are widely used as implants, biomedical devices, and drug delivery systems. Although these materials show promise for implant technologies and clinical applications, many of them fail to simultaneously possess key properties, such as mechanical stability, biostability, stretchability, cell adhesiveness, biofilm inhibition, and drug delivery ability. Therefore, there is considerable need for the development and improvement of new biomaterials with improved properties. In this context, we describe the synthesis of a new hybrid nanocomposite material that is prepared by incorporating bifunctional nanomaterials onto glass and polydimethylsiloxane surfaces. The results show that our hybrid nanocomposite material is elastic, stretchable, injectable, biostable, has pH-controlled drug delivery ability, and display improved cell adhesion and proliferation and, at the same time, impacted bacterial biofilm formation on the respective surfaces.

Wastewater treatment alters microbial colonization of microplastics

Microplastics are ubiquitous contaminants in aquatic habitats globally, and wastewater treatment plants (WWTPs) are point sources of microplastics. Within aquatic habitats microplastics are colonized by microbial biofilms, which can include pathogenic taxa and taxa associated with plastic breakdown. Microplastics enter WWTPs in sewage and exit in sludge or effluent, but the role that WWTPs play in establishing or modifying microplastic bacterial assemblages is unknown. We analyzed microplastics and associated biofilms in raw sewage, effluent water, and sludge from two WWTPs. Both plants retained >99% of influent microplastics in sludge, and sludge microplastics showed higher bacterial species richness and higher abundance of taxa associated with bioflocculation (e.g. Xanthomonas) than influent microplastics, suggesting that colonization of microplastics within the WWTP may play a role in retention. Microplastics in WWTP effluent included significantly lower abundances of some potentially pathogenic bacterial taxa (e.g. Campylobacteraceae) compared to influent microplastics; however, other potentially pathogenic taxa (e.g. Acinetobacter) remained abundant on effluent microplastics, and several taxa linked to plastic breakdown (e.g. Klebsiella, Pseudomonas, and Sphingomonas) were significantly more abundant on effluent compared to influent microplastics. These results indicate that diverse bacterial assemblages colonize microplastics within sewage and that WWTPs can play a significant role in modifying the microplastic-associated assemblages, which may affect the fate of microplastics within the WWTPs and the environment.