Generation of mouse conditional knockout alleles in one step using the i-GONAD method

Electrotransfer for nucleic acid and protein delivery

Electrotransfer of nucleic acids and proteins has become crucial in biotechnology for gene augmentation and genome editing. This review explores the applications of electrotransfer in both ex vivo and in vivo scenarios, emphasizing biomedical uses. We provide insights into completed clinical trials and successful instances of nucleic acid and protein electrotransfer into therapeutically relevant cells such as immune cells and stem and progenitor cells. In addition, we delve into emerging areas of electrotransfer where nanotechnology and deep learning techniques overcome the limitations of traditional electroporation.

Approaches for timeline reductions in pathogenesis studies using genetically modified mice

Although genetically modified mouse models have long been a powerful tool for microbiology research, the manipulation of the mouse genome is expensive, time consuming, and has historically remained the domain of dedicated animal facilities. The recent use of in vivo clustered regularly interspaced short palindromic repeats (CRISPR)-based editing technology has been reported to reduce the expertise, cost, and time required to generate novel mouse lines; it has remained unclear, however, if this new technology could meaningfully alter experimental timelines. Here, we report the optimization of an in oviduct murine genetic manipulation technique for use by microbiologists. We use this approach to generate a series of knockout mice and detail a protocol using an influenza A virus infection model to test the preliminary importance of a host factor in as short as 11 weeks (with a fully backcrossed knockout line in ~22 weeks) from initiation of the study. Broader use of this approach by the microbiology community will allow for more efficient, and rapid, definition of novel pathogenic mechanisms in vivo. IMPORTANCE Clustered regularly interspaced short palindromic repeats (CRISPR)-based technologies have already begun to revolutionize biomedical science. An emerging application of this technology is in the development of genetically modified model organisms to study the mechanisms underlying infectious disease. Here, we describe a protocol using an in vivo CRISPR-based approach that can be used to test the importance of a candidate host factor for microbial pathogenesis in less than 3 months and before complete establishment of a new mouse line. Adoption of this approach by the broader microbiology community will help to decrease the resources and time required to understand how pathogens cause disease which will ultimately speed up the development of new clinical interventions and therapies.

The Past, Present, and Future of Genetically Engineered Mouse Models for Skeletal Biology

The ability to create genetically engineered mouse models (GEMMs) has exponentially increased our understanding of many areas of biology. Musculoskeletal biology is no exception. In this review, we will first discuss the historical development of GEMMs and how these developments have influenced musculoskeletal disease research. This review will also update our 2008 review that appeared in BONEKey, a journal that is no longer readily available online. We will first review the historical development of GEMMs in general, followed by a particular emphasis on the ability to perform tissue-specific (conditional) knockouts focusing on musculoskeletal tissues. We will then discuss how the development of CRISPR/Cas-based technologies during the last decade has revolutionized the generation of GEMMs.

Evidence-Based Guide to Using Artificial Introns for Tissue-Specific Knockout in Mice

Up until recently, methods for generating floxed mice either conventionally or by CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats)-Cas9 (CRISPR-associated protein 9) editing have been technically challenging, expensive and error-prone, or time-consuming. To circumvent these issues, several labs have started successfully using a small artificial intron to conditionally knockout (KO) a gene of interest in mice. However, many other labs are having difficulty getting the technique to work. The key problem appears to be either a failure in achieving correct splicing after the introduction of the artificial intron into the gene or, just as crucial, insufficient functional KO of the gene's protein after Cre-induced removal of the intron's branchpoint. Presented here is a guide on how to choose an appropriate exon and where to place the recombinase-regulated artificial intron (rAI) in that exon to prevent disrupting normal gene splicing while maximizing mRNA degradation after recombinase treatment. The reasoning behind each step in the guide is also discussed. Following these recommendations should increase the success rate of this easy, new, and alternative technique for producing tissue-specific KO mice.

Multiple and Consecutive Genome Editing Using i-GONAD and Breeding Enrichment Facilitates the Production of Genetically Modified Mice

Genetically modified (GM) mice are essential tools in biomedical research. Traditional methods for generating GM mice are expensive and require specialized personnel and equipment. The use of clustered regularly interspaced short palindromic repeats (CRISPR) coupled with improved-Genome editing via Oviductal Nucleic Acids Delivery (i-GONAD) has highly increased the feasibility of producing GM mice in research laboratories. However, genetic modification in inbred mouse strains of interest such as C57BL/6 (B6) is still challenging because of their low fertility and embryo fragility. We have successfully generated multiple novel GM mouse strains in the B6 background while attempting to optimize i-GONAD. We found that i-GONAD reduced the litter size in superovulated pregnant females but did not impact pregnancy rates. Natural mating or low-hormone dose did not increase the low fertility rate observed in superovulated B6 females. However, diet enrichment had a positive effect on pregnancy success. We also optimized breeding conditions to increase the survival of small litters by co-housing i-GONAD-treated pregnant B6 females with synchronized pregnant FVB/NJ companion mothers. Thus, GM mice generation was increased by an enriched diet and shared pup rearing with highly fertile females such as FVB/NJ. In the present study, we generated 16 GM mice using a CRISPR/Cas system to target individual and multiple loci simultaneously or consecutively. We also compared homology-directed repair efficiency using different methods for LoxP insertion for conditional knockout mouse production. We found that a two-step serial LoxP insertion, in which each LoxP sequence was inserted individually in different i-GONAD procedures, was a low-risk high-efficiency method for generating floxed mice.

Progress in and Prospects of Genome Editing Tools for Human Disease Model Development and Therapeutic Applications

Programmable nucleases, such as zinc finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), and clustered regularly interspaced short palindromic repeats (CRISPR)/Cas, are widely accepted because of their diversity and enormous potential for targeted genomic modifications in eukaryotes and other animals. Moreover, rapid advances in genome editing tools have accelerated the ability to produce various genetically modified animal models for studying human diseases. Given the advances in gene editing tools, these animal models are gradually evolving toward mimicking human diseases through the introduction of human pathogenic mutations in their genome rather than the conventional gene knockout. In the present review, we summarize the current progress in and discuss the prospects for developing mouse models of human diseases and their therapeutic applications based on advances in the study of programmable nucleases.

Genetic and Molecular Quality Control of Genetically Engineered Mice

Genetically engineered mice are used as avatars to understand mammalian gene function and develop therapies for human disease. During genetic modification, unintended changes can occur, and these changes may result in misassigned gene-phenotype relationships leading to incorrect or incomplete experimental interpretations. The types of unintended changes that may occur depend on the allele type being made and the genetic engineering approach used. Here we broadly categorize allele types as deletions, insertions, base changes, and transgenes derived from engineered embryonic stem (ES) cells or edited mouse embryos. However, the methods we describe can be adapted to other allele types and engineering strategies. We describe the sources and consequ ences of common unintended changes and best practices for detecting both intended and unintended changes by screening and genetic and molecular quality control (QC) of chimeras, founders, and their progeny. Employing these practices, along with careful allele design and good colony management, will increase the chance that investigations using genetically engineered mice will produce high-quality reproducible results, to enable a robust understanding of gene function, human disease etiology, and therapeutic development.

Improved Genome Editing via Oviductal Nucleic Acids Delivery (i-GONAD): Protocol Steps and Additional Notes

The clustered regularly interspaced short palindromic repeats (CRISPR) technology has made it possible to produce genome-edited (GE) animals more easily and rapidly than before. In most cases, GE mice are produced by microinjection (MI) or by in vitro electroporation (EP) of CRISPR reagents into fertilized eggs (zygotes). Both of these approaches require ex vivo handling of isolated embryos and their subsequent transfer into another set of mice (called recipient or pseudopregnant mice). Such experiments are performed by highly skilled technicians (especially for MI). We recently developed a novel genome editing method, called "GONAD (Genome-editing via Oviductal Nucleic Acids Delivery)," which can completely eliminate the ex vivo handling of embryos. We also made improvements to the GONAD method, termed "improved-GONAD (i-GONAD)." The i-GONAD method involves injection of CRISPR reagents into the oviduct of an anesthetized pregnant female using a mouthpiece-controlled glass micropipette under a dissecting microscope, followed by EP of the entire oviduct allowing the CRISPR reagents to enter into the zygotes present inside the oviduct, in situ. After the i-GONAD procedure, the mouse recovered from anesthesia is allowed to continue the pregnancy to full term to deliver its pups. The i-GONAD method does not require pseudopregnant female animals for embryo transfer, unlike the methods relying on ex vivo handling of zygotes. Therefore, the i-GONAD method can reduce the number of animals used, compared to the traditional methods. In this chapter, we describe some newer technical tips about the i-GONAD method. Additionally, even though the detailed protocols of GONAD and i-GONAD have been published elsewhere (Gurumurthy et al., Curr Protoc Hum Genet 88:15.8.1-15.8.12, 2016 Nat Protoc 14:2452-2482, 2019), we provide all the protocol steps of i-GONAD in this chapter so that the reader can find most of the information, needed for performing i-GONAD experiments, in one place.

Introduction of loxP sites by electroporation in the mouse genome; a simple approach for conditional allele generation in complex targeting loci

Background

The discovery of the CRISPR-Cas9 system and its applicability in mammalian embryos has revolutionized the way we generate genetically engineered animal models. To date, models harbouring conditional alleles (i.e. two loxP sites flanking an exon or a critical DNA sequence of interest) are amongst the most widely requested project type that are challenging to generate as they require simultaneous cleavage of the genome using two guides in order to properly integrate the repair template. An approach, using embryo sequential electroporation has been reported in the literature to successfully introduce loxP sites on the same allele. Here, we describe a modification of this sequential electroporation procedure that demonstrated the production of conditional allele mouse models for eight different genes via one of two possible strategies: either by consecutive sequential electroporation (strategy A) or non-consecutive sequential electroporation (strategy B). This latest strategy originated from using the by-product produced when using consecutive sequential electroporation (i.e. mice with a single targeted loxP site) to complete the project.

Results

By using strategy A, we demonstrated successful generation of conditional allele models for three different genes (Icam1, Lox, and Sar1b), with targeting efficiencies varying between 5 and 13%. By using strategy B, we generated five conditional allele models (Loxl1, Pard6a, Pard6g, Clcf1, and Mapkapk5), with targeting efficiencies varying between 3 and 25%.

Conclusion

Our modified electroporation-based approach, involving one of the two alternative strategies, allowed the production of conditional allele models for eight different genes via two different possible paths. This reproducible method will serve as another reliable approach in addition to other well-established methodologies in the literature for conditional allele mouse model generation.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12896-022-00744-8.

High-throughput Genetically Modified Animal Experiments Achieved by Next-generation Mammalian Genetics

Animal models are essential tools for modern scientists to conduct biological experiments and investigate their hypotheses in vivo. However, for the past decade, raising the throughput of such animal experiments has been a great challenge. Conventionally, in vivo high-throughput assay was achieved through large-scale mutagen-driven forward genetic screening, which took years to find causal genes. In contrast, reverse genetics accelerated the causal gene identification process, but its throughput was also limited by 2 barriers, that is, the genome modification step and the time-consuming crossing step. Defined as genetics without crossing, next-generation genetics is able to produce gene-modified animals that can be analyzed at the founder generation (F0). This method is or can be accomplished through recent technological advances in gene editing and virus-based efficient gene modifications. Notably, next-generation genetics has accelerated the process of cross-species studies, and it will be a useful technique during animal experiments as it can provide genetic perturbation at an individual level without crossing. In this review, we begin by introducing the history of animal-based high-throughput analysis, with a specific focus on chronobiology. We then describe ways that gene modification efficiency during animal experiments was enhanced and why crossing remained a barrier to reaching higher efficiency. Moreover, we mention the Triple CRISPR as a critical technique for achieving next-generation genetics. Finally, we discuss the potential applications and limitations of next-generation mammalian genetics.

Highly reliable creation of floxed alleles by electroporating single-cell embryos

BACKGROUND

Floxed (flanked by loxP) alleles are a crucial portion of conditional knockout mouse models. However, an efficient and reliable strategy to flox genomic regions of any desired size is still lacking.

RESULTS

Here, we demonstrate that the method combining electroporation of fertilized eggs with gRNA/Cas9 complexes and single-stranded oligodeoxynucleotides (ssODNs), assessing phasing of loxP insertions in founders using an in vitro Cre assay and an optional, highly specific and efficient second-round targeting ensures the generation of floxed F1 animals in roughly five months for a wide range of sequence lengths (448 bp to 160 kb reported here).

CONCLUSIONS

Floxed alleles can be reliably obtained in a predictable timeline using the improved method of electroporation of two gRNA/Cas9 ribonucleoprotein particles (RNPs) and two ssODNs.

Nanoscale delivery of phytochemicals targeting CRISPR/Cas9 for cancer therapy

BACKGROUND

With growing global prevalence, cancer is a major cause of disease-related deaths. The understanding of the fundamental tumor pathology has contributed to the development of agents targeting oncogenic signaling pathways. Although these agents have increased survival for defined cancers, the therapeutic choices are still limited due to the development of drug resistance. CRISPR/Cas9 is a powerful new technology in cancer therapy by facilitating the identification of novel treatment targets and development of cell-based treatment strategies.

PURPOSE

We focused on applications of the CRISPR/Cas9 system in cancer therapy and discuss nanoscale delivery of cytotoxic phytochemical targeting the CRISPR/Cas9 system.

RESULTS

Genome engineering has been significantly accelerated by the advancement of the CRISPR/Cas9 technique. Phytochemicals play a key role in treating cancer by targeting various mechanisms and pathways.

CONCLUSIONS

The use of CRISPR/Cas9 for nanoscale delivery of phytochemicals opens new avenues in cancer therapy. One of the main obstacles in the clinical application of CRISPR/Cas9 is safe and efficient delivery. As viral delivery methods have certain drawbacks, there is an urgent need to develop non-viral delivery systems for therapeutic applications.

LETMD1 is required for mitochondrial structure and thermogenic function of brown adipocytes

Obesity and metabolic disorders caused by energy surplus pose an increasing concern within the global population. Brown adipose tissue (BAT) dissipates energy through mitochondrial non-shivering thermogenesis, thus representing a powerful agent against obesity. Here we explore the novel role of a mitochondrial outer membrane protein, LETM1-domain containing 1 (LETMD1), in BAT. We generated a knockout (Letmd1KO ) mouse model and analyzed BAT morphology, function and gene expression under various physiological conditions. While the Letmd1KO mice are born normally and have normal morphology and body weight, they lose multilocular brown adipocytes completely and have diminished mitochondrial abundance, DNA copy number, cristae structure, and thermogenic gene expression in the intrascapular BAT, associated with elevated reactive oxidative stress. In consequence, the Letmd1KO mice fail to maintain body temperature in response to acute cold exposure without food and become hypothermic within 4 h. Although the cold-exposed Letmd1KO mice can maintain body temperature in the presence of food, they cannot upregulate expression of uncoupling protein 1 (UCP1) and convert white to beige adipocytes, nor can they respond to adrenergic stimulation. These results demonstrate that LETMD1 is essential for mitochondrial structure and function, and thermogenesis of brown adipocytes.

Rapid generation of conditional knockout mice using the CRISPR-Cas9 system and electroporation for neuroscience research

The Cre/LoxP-based conditional knockout technology is a powerful tool for gene function analysis that allows region- and time-specific gene manipulation. However, inserting a pair of LoxP cassettes to generate conditional knockout can be technically challenging and thus time- and resource-consuming. This study proposes an efficient, low-cost method to generate floxed mice using in vitro fertilization and the CRISPR-Cas9 system over two consecutive generations. This method allowed us to produce floxed mice targeting exons 5 and 6 of CaMK1 in a short period of 125 days, using only 16 mice. In addition, we directly edited the genome of fertilized eggs of mice with our target genetic background, C57BL/6 N, to eliminate additional backcrossing steps. We confirmed that the genome of the generated floxed mice was responsive to the Cre protein. This low-cost, time-saving method for generating conditional knockout will facilitate comprehensive, tissue-specific genome analyses.