Geometric control of bacterial surface accumulation

Accumulation and depletion of E. coli in surfaces mediated by curvature

Can topography be used to control bacteria accumulation? We address this question in the model system of smooth-swimming and run-and-tumble Escherichia coli swimming near a sinusoidal surface, and show that the accumulation of bacteria is determined by the characteristic curvature of the surface. For low curvatures, cells swim along the surface due to steric alignment and are ejected from the surface when they reach the peak of the sinusoid. Increasing curvature enhances this effect and reduces the density of bacteria in the curved surface. However, for curvatures larger than κ^{*}≈0.25µm^{-1}, bacteria become trapped in the valleys, where they can remain for long periods of time. Minimal simulations considering only steric interactions with the surface reproduce these results and give insights into the physical mechanisms defining the critical curvature, which is found to scale with the inverse of the bacterial length. We show that for curvatures larger than κ^{*}, the otherwise stable alignment with the wall becomes unstable while the stable orientation is now perpendicular to the wall, thus predicting accurately the onset of trapping at the valleys.

Bacterial accumulation in intestinal folds induced by physical and biological factors

BACKGROUND

The gut microbiota, vital for host health, influences metabolism, immune function, and development. Understanding the dynamic processes of bacterial accumulation within the gut is crucial, as it is closely related to immune responses, antibiotic resistance, and colorectal cancer. We investigated Escherichia coli behavior and distribution in zebrafish larval intestines, focusing on the gut microenvironment.

RESULTS

We discovered that E. coli spread was considerably suppressed within the intestinal folds, leading to a strong physical accumulation in the folds. Moreover, a higher concentration of E. coli on the dorsal side than on the ventral side was observed. Our in vitro microfluidic experiments and theoretical analysis revealed that the overall distribution of E. coli in the intestines was established by a combination of physical factor and bacterial taxis.

CONCLUSIONS

Our findings provide valuable insight into how the intestinal microenvironment affects bacterial motility and accumulation, enhancing our understanding of the behavioral and ecological dynamics of the intestinal microbiota.

Role of tumbling in bacterial scattering at convex obstacles

Active propulsion, as performed by bacteria and Janus particles, in combination with hydrodynamic interaction results in the accumulation of bacteria at a flat wall. However, in microfluidic devices with cylindrical pillars of sufficiently small radius, self-propelled particles can slide along and scatter off the surface of a pillar, without becoming trapped over long times. This nonequilibrium scattering process has been predicted to result in large diffusivities, even at high obstacle density, unlike particles that undergo classical specular reflection. Here, we test this prediction by experimentally studying the nonequilibrium scattering of pusherlike swimmers in microfluidic obstacle lattices. To explore the role of tumbles in the scattering process, we microscopically tracked wild-type (run and tumble) and smooth-swimming (run only) mutants of the bacterium Escherichia coli scattering off microfluidic pillars. We quantified key scattering parameters and related them to previously proposed models that included a prediction for the diffusivity, discussing their relevance. Finally, we discuss potential interpretations of the role of tumbles in the scattering process and connect our work to the broader study of swimmers in porous media.

Hydrodynamics-Induced Long-Range Attraction between Plates in Bacterial Suspensions

We perform optical-tweezers experiments and mesoscale fluid simulations to study the effective interactions between two parallel plates immersed in bacterial suspensions. The plates are found to experience a long-range attraction, which increases linearly with bacterial density and decreases with plate separation. The higher bacterial density and orientation order between plates observed in the experiments imply that the long-range effective attraction mainly arises from the bacterial flow field, instead of the direct bacterium-plate collisions, which is confirmed by the simulations. Furthermore, the hydrodynamic contribution is inversely proportional to the squared interplate separation in the far field. Our findings highlight the importance of hydrodynamics on the effective forces between passive objects in active baths, providing new possibilities to control activity-directed assembly.

Curvature in Biological Systems: Its Quantification, Emergence, and Implications across the Scales

Surface curvature both emerges from, and influences the behavior of, living objects at length scales ranging from cell membranes to single cells to tissues and organs. The relevance of surface curvature in biology is supported by numerous experimental and theoretical investigations in recent years. In this review, first, a brief introduction to the key ideas of surface curvature in the context of biological systems is given and the challenges that arise when measuring surface curvature are discussed. Giving an overview of the emergence of curvature in biological systems, its significance at different length scales becomes apparent. On the other hand, summarizing current findings also shows that both single cells and entire cell sheets, tissues or organisms respond to curvature by modulating their shape and their migration behavior. Finally, the interplay between the distribution of morphogens or micro-organisms and the emergence of curvature across length scales is addressed with examples demonstrating these key mechanistic principles of morphogenesis. Overall, this review highlights that curved interfaces are not merely a passive by-product of the chemical, biological, and mechanical processes but that curvature acts also as a signal that co-determines these processes.

Bacterial mobility and motility in porous media mimicked by microspheres

Bacterial motion in porous media is essential for their survival, proper functioning, and various applications. Here we investigated the motion of Escherichia coli bacteria in microsphere-mimicked porous media. We observed reduced bacterial velocity and enhanced directional changes of bacteria as the density of microspheres increased, while such changes happened mostly around the microspheres and due to the collisions with the microspheres. More importantly, we established and quantified the correlation between the bacterial trapping in porous media and the geometric confinement imposed by the microspheres. In addition, numerical simulations showed that the active Brownian motion model in the presence of microspheres resulted in bacterial motion that are consistent with the experimental observations. Our study suggested that it is important to distinguish the ability of bacteria to move easily - bacterial mobility - from the ability of bacteria to move independently - bacteria motility. Our results showed that bacterial motility remains similar in porous media, but bacterial mobility was significantly affected by the pore-scale confinement.

Cervix chip mimicking cervical microenvironment for quantifying sperm locomotion

As the gate for sperm swimming into the female reproductive tract, cervix is full of cervical mucus, which plays an important role in sperm locomotion. The fact that sperm cannot pass through the cervical mucus-cervix microenvironment will cause the male infertility. However, how the sperm swim across the cervix microenvironment remains elusive. We used hyaluronic acid (HA), a substitute of cervical mucus to mimic cervix microenvironment and designed a cervix chip to study sperm selection and behavior. An accumulation of sperm in HA confirmed that HA served as a reservoir for sperm, similar to cervical mucus. We found that sperm escaping from HA exhibited higher motility than the sperm accessing into HA, suggesting that HA functions as a filter to select sperm with high activity. Our findings construct a practical platform to explore the sophisticated interaction of sperm with cervix microenvironment, with elaborate swimming indicators thus provide a promising cervix chip for sperm selection with kinematic features on-demand. What's more, the cervix chip allows the convenient use in clinical infertility diagnosis, owing to the advantage of simple, fast and high efficiency.

Correlated escape of active particles across a potential barrier

We study the dynamics of one-dimensional active particles confined in a double-well potential, focusing on the escape properties of the system, such as the mean escape time from a well. We first consider a single-particle both in near and far-from-equilibrium regimes by varying the persistence time of the active force and the swim velocity. A non-monotonic behavior of the mean escape time is observed with the persistence time of the activity, revealing the existence of an optimal choice of the parameters favoring the escape process. For small persistence times, a Kramers-like formula with an effective potential obtained within the unified colored noise approximation is shown to hold. Instead, for large persistence times, we developed a simple theoretical argument based on the first passage theory, which explains the linear dependence of the escape time with the persistence of the active force. In the second part of the work, we consider the escape on two active particles mutually repelling. Interestingly, the subtle interplay of active and repulsive forces may lead to a correlation between particles, favoring the simultaneous jump across the barrier. This mechanism cannot be observed in the escape process of two passive particles. Finally, we find that in the small persistence regime, the repulsion favors the escape, such as in passive systems, in agreement with our theoretical predictions, while for large persistence times, the repulsive and active forces produce an effective attraction, which hinders the barrier crossing.

Surface Design for Antibacterial Materials: From Fundamentals to Advanced Strategies

Healthcare-acquired infections as well as increasing antimicrobial resistance have become an urgent global challenge, thus smart alternative solutions are needed to tackle bacterial infections. Antibacterial materials in biomedical applications and hospital hygiene have attracted great interest, in particular, the emergence of surface design strategies offer an effective alternative to antibiotics, thereby preventing the possible development of bacterial resistance. In this review, recent progress on advanced surface modifications to prevent bacterial infections are addressed comprehensively, starting with the key factors against bacterial adhesion, followed by varying strategies that can inhibit biofilm formation effectively. Furthermore, "super antibacterial systems" through pre-treatment defense and targeted bactericidal system, are proposed with increasing evidence of clinical potential. Finally, the advantages and future challenges of surface strategies to resist healthcare-associated infections are discussed, with promising prospects of developing novel antimicrobial materials.

Curved ratchets improve bacteria rectification in microfluidic devices

We study how bacteria rectification in microfluidics devices can be optimized by performing experiments with eight ratchets of different shape and size. Results show that curved ratchets perform best and that their radius of curvature influences how well they perform, as it affects the time bacteria spend on the ratchet surface. We find that the optimal bacterial ratchet is a 60μm radius semicircle witch 15μm concavities. We also show that the angle at which bacteria leave the ratchets can play an important role in their efficiency. Lastly, we reproduce our experimental conditions in a simple numerical simulation to confirm our findings.

Branching random graph model of rough surfaces describes thermal properties of the effective molecular potential

Fluid properties near rough surfaces are crucial in describing fundamental surface phenomena and modern industrial material design implementations. One of the most powerful approaches to model real rough materials is based on the surface representation in terms of random geometry. Understanding the influence of random solid geometry on the low-temperature fluid thermodynamics is a cutting-edge problem. Therefore, this work extends recent studies bypassing high-temperature expansion and small heterogeneity scale. We introduce random branching trees whose topology reflects the hierarchical properties of a random solid geometry. This mathematical representation allows us to obtain averaged free energy using a statistical model of virtual clusters interacting through random ultrametric pairwise potentials. Our results demonstrate that a significant impact to fluid-solid interface energy is induced by the hierarchical structure of random geometry at low temperature. These calculations coincide with direct Monte Carlo simulations. Due to the study's interdisciplinary nature, the developed approach can be applied to a wide range of quenched disorder systems on random graphs.

Steric scattering of rod-like swimmers in low Reynolds number environments

Microbes form integral components of all natural ecosystems. In most cases, the surrounding micro-environment has physical variations that affect the movements of micro-swimmers, including solid objects of varying size, shape and density. As swimmers move through viscous environments, a combination of hydrodynamic and steric forces are known to significantly alter their trajectories in a way that depends on surface curvature. In this work, our goal was to clarify the role of steric forces when rod-like swimmers interact with solid objects comparable to cell size. We imaged hundreds-of-thousands of scattering interactions between swimming bacteria and micro-fabricated pillars with radii from ∼1 to ∼10 cell lengths. Scattering interactions were parameterized by the angle of the cell upon contact with the pillar, and primarily produced forward-scattering events that fell into distinct chiral distributions for scattering angle - no hydrodynamic trapping was observed. The chirality of a scattering event was a stochastic variable whose probability smoothly and symmetrically depended on the contact angle. Neglecting hydrodynamics, we developed a model that only considers contact forces and torques for a rear-pushed thin-rod scattering from a cylinder - the model predictions were in good agreement with measured data. Our results suggest that alteration of bacterial trajectories is subject to distinct mechanisms when interacting with objects of different size; primarily steric for objects below ∼10 cell lengths and requiring incorporation of hydrodynamics at larger scales. These results contribute to a mechanistic framework in which to examine (and potentially engineer) microbial movements through natural and synthetic environments that present complex steric structure.

The effect of flow on swimming bacteria controls the initial colonization of curved surfaces

The colonization of surfaces by bacteria is a widespread phenomenon with consequences on environmental processes and human health. While much is known about the molecular mechanisms of surface colonization, the influence of the physical environment remains poorly understood. Here we show that the colonization of non-planar surfaces by motile bacteria is largely controlled by flow. Using microfluidic experiments with Pseudomonas aeruginosa and Escherichia coli, we demonstrate that the velocity gradients created by a curved surface drive preferential attachment to specific regions of the collecting surface, namely the leeward side of cylinders and immediately downstream of apexes on corrugated surfaces, in stark contrast to where nonmotile cells attach. Attachment location and rate depend on the local hydrodynamics and, as revealed by a mathematical model benchmarked on the observations, on cell morphology and swimming traits. These results highlight the importance of flow on the magnitude and location of bacterial colonization of surfaces.

Bacterial colonization of surfaces has a profound environmental, technological and medical impact. Here, Secchi et al. show how fluid flow affects the magnitude and location of bacterial colonization on curved surfaces through its coupling with cell morphology and motility.

Patterning non-equilibrium morphologies in stimuli-responsive gels through topographical confinement

Stimuli-responsive "smart" polymers have generated significant interest for introducing dynamic control into the properties of antifouling coatings, smart membranes, switchable adhesives and cell manipulation substrates. Switchable surface morphologies formed by confining stimuli-responsive gels to topographically structured substrates have shown potential for a variety of interfacial applications. Beyond patterning the equilibrium swelling behavior of gels, subjecting stimuli-responsive gels to topographical confinement could also introduce spatial gradients in the various timescales associated with gel deformation, giving rise to novel non-equilibrium morphologies. Here we show how by curing poly(N-isopropylacrylamide) (pNIPAAm)-based gel under confinement to a rigid, bumpy substrate, we can not only induce the surface curvature to invert with temperature, but also program the transient, non-equilibrium morphologies that emerge during the inversion process through changing the heating path. Finite element simulations show that the emergence of these transient morphologies is correlated with confinement-induced gradients in polymer concentration and position-dependent hydrostatic pressure within the gel. To illustrate the relevance of such morphologies in interfacial applications, we show how they enable us to control the gravity-induced assembly of colloidal particles and microalgae. Finally, we show how more complex arrangements in particle assembly can be created through controlling the thickness of the temperature-responsive gel over the bumps. Patterning stimuli-responsive gels on topographically-structured surfaces not only enables switching between two invertible topographies, but could also create opportunities for stimuli ramp-dependent control over the local curvature of the surface and emergence of unique transient morphologies. Harnessing these features could have potential in the design of multifunctional, actuatable materials for switchable adhesion, antifouling, cell manipulation, and liquid and particle transport surfaces.