Initial Solvent-Driven Nonequilibrium Effect on Structure, Properties, and Dynamics of Polymer Nanocomposites

Intensified Nonequilibrium Effect of Polymer Nanocomposites with Decreasing Nanoparticle Size

What are the most important and decisive parameters that determine the structure and the property of polymer nanocomposites (PNCs)? Previous studies answered that controlling the nanoparticle interface is critical, which can be achieved with a choice of a compatible nanoparticle, a proper surface modification, and a change in the polymer chain length. In addition to these parameters, the processing condition of PNCs has recently emerged as an influential parameter for controlling PNC properties, suggesting the existence of the nonequilibrium effect of PNCs. In this regard, we chose the solvent as a main change in the processing condition and investigated the initial solvent-driven nonequilibrium effect of PNCs with varied nanoparticle (NP) sizes. We found that the type of the initial solvent is indeed crucial in determining the ultimate properties of the PNCs, and this becomes more influential as the size of NPs decreases. The decreasing size of NPs causes a conformational change in the adsorbed polymers from tightly packed layers to loosely dangling chains. This results in much greater differences in NP microstructures and rheological properties of PNCs, indicating a stronger nonequilibrium effect with smaller NPs.

Polymer solution structure and dynamics within pores of hexagonally close-packed nanoparticles

Using coarse-grained molecular dynamics simulations, we examine structure and dynamics of polymer solutions under confinement within the pores of a hexagonally close-packed (HCP) nanoparticle system with nanoparticle diameter fifty times that of the polymer Kuhn segment size. We model a condition where the polymer chain is in a good solvent (i.e., polymer-polymer interaction is purely repulsive and polymer-solvent and solvent-solvent interactions are attractive) and the polymer-nanoparticle and solvent-nanoparticle interactions are purely repulsive. We probe three polymer lengths (N = 10, 114, and 228 Kuhn segments) and three solution concentrations (1, 10, and 25%v) to understand how the polymer chain conformations and chain center-of-mass diffusion change under confinement within the pores of the HCP nanoparticle structure from those seen in bulk. The known trend of bulk polymer R_g² decreasing with increasing concentration no longer holds when confined in the pores of HCP nanoparticle structure; for example, for the 114-mer, the HCP 〈R_g²〉 at 1%v concentration is lower than HCP 〈R_g²〉 at 10%v concentration. The 〈R_g²〉 of the 114-mer and 228-mer exhibit the largest percent decline going from bulk to HCP at the 1%v concentration and the smallest percent decline at the 25%v concentration. We also provide insight into how the confinement ratio (CR) of polymer chain size to pore size within tetrahedral and octahedral pores in the HCP arrangement of nanoparticles affects the chain conformation and diffusion at various concentrations. At the same concentration, the N = 114 has significantly more movement between pores than the N = 228 chains. For the N = 114 polymer, the diffusion between pores (i.e., inter-pore diffusion) accelerates the overall diffusion rate for the confined HCP system while for the N = 228 polymer, the polymer diffusion in the entire HCP is dominated by the diffusion within the tetrahedral or octahedral pores with minor contributions from inter-pore diffusion. These findings augment the fundamental understanding of macromolecular diffusion through large, densely packed nanoparticle assemblies and are relevant to research focused on fabrication of polymer composite materials for chemical separations, storage, optics, and photonics. We perform coarse-grained molecular dynamics simulations to understand structure and dynamics of polymer solutions under confinement within hexagonal close packed nanoparticles with radii much larger than the polymer chain's bulk radius of gyration.

Dynamics of Polymer Chains in Poly(ethylene oxide)/Silica Nanocomposites via a Combined Computational and Experimental Approach

The dynamics of polymer chains in poly(ethylene oxide)/silica (PEO/SiO₂) nanoparticle nanohybrids have been investigated via a combined computational and experimental approach involving atomistic molecular dynamics simulations and dielectric relaxation spectroscopy (DRS) measurements. The complementarity of the approaches allows us to study systems with different polymer molecular weights, nanoparticle radii, and compositions across a broad range of temperatures. We study the effects of spatial confinement, which is induced by the nanoparticles, and chain adsorption on the polymer's structure and dynamics. The investigation of the static properties of the nanocomposites via detailed atomistic simulations revealed a heterogeneous polymer density layer at the vicinity of the PEO/SiO₂ interface that exhibited an intense maximum close to the inorganic surface, whereas the bulk density was reached for distances ∼1-1.2 nm away from the nanoparticle. For small volume fractions of nanoparticles, the polymer dynamics, probed by the atomistic simulations of low-molecular-weight chains at high temperatures, are consistent with the presence of a thin adsorbed layer that exhibits slow dynamics, with the dynamics far away from the nanoparticle being similar to those in the bulk. However, for high volume fractions of nanoparticles (strong confinement), the dynamics of all polymer chains were predicted slower than that in the bulk. On the other hand, similar dynamics were found experimentally for both the local β-process and the segmental dynamics for high-molecular-weight systems measured at temperatures below the melting temperature of the polymer, which were probed by DRS. These differences can be attributed to various parameters, including systems of different molecular weights and nanoparticle states of dispersion, the different temperature range studied by the different methods, the potential presence of a reduced-mobility PEO/SiO₂ interfacial layer that does not contribute to the dielectric spectrum, and the presence of amorphous-crystalline interfaces in the experimental samples that may lead to a different dynamical behaviors of the PEO chains.

Processing method determines the long-term stability of particle dispersions in concentrated nanoparticle/polymer suspensions

Since the degree of particle dispersion can determine the physical properties of polymer nanocomposites (PNCs), plenty of studies have focused on the intrinsic parameters of PNCs such as the concentration/size/chemistry of nanoparticles/polymers relevant to the particle microstructure. While the consideration of these parameters is based on PNCs being in their equilibrium states, PNCs can be kinetically trapped in a nonequilibrium state during the multiple steps of processing. In other words, processing conditions can contribute more significantly to particle dispersion and the properties of PNCs beyond the effects of the intrinsic parameters. Hence, a systematic understanding of the nonequilibrium behaviour of PNCs is required to achieve the desired properties. In this work, we prepared concentrated suspensions with two different preparation pathways. The two different pathways yield different polymer conformations particularly near the particle surface despite the same composition of particles/polymers as the systems are trapped in a nonequilibrium state. Accordingly, the particle microstructures are also greatly changed by the preparation pathway. We found that even in the presence of solvents, these preparation pathway-dependent nonequilibrium effects on particle microstructures persist after several months of aging and ultimately determine the long-term stability of the particle dispersion.

Network structure of swollen iodine-doped poly(vinyl alcohol) amorphous domain as characterized by low field NMR

The network structure in the amorphous domain of swollen iodine-doped poly(vinyl alcohol) (PVA) was systematically investigated by low-field (LF) NMR techniques to reveal the PVA-iodine complex formation mechanism. Three PVA-iodine complexes were obtained under different iodine concentrations (c_iodine) of KI/I₂ solution: (i) c_iodine < 0.1 M: PVA-I₃^-/I₅^- complex only exists in the non-crystalline region, (ii) 0.1 M < c_iodine < 1 M: formation of PVA-I₃^- complex I, and (iii) c_iodine > 1 M: formation of PVA-I₃^- complex II. It was found that there is no intermediate-magnitude chain motion of PVA under dyeing conditions to induce the substance exchange, as evidenced by the unchanged second moment M₂ (∼1.2 × 10⁴ m s^-2) at elevated temperature (<380 K). The introduction of iodine ions can affect the chain mobility of the interphase and mobile regions. With increasing c_iodine, the chain dynamics become more restricted, as detected by the faster decay of the T₂ relaxometry results, which further accelerates the complexation process. The residual dipolar coupling strength, D_res, obtained by the more quantitative double-quantum (DQ) NMR, increases abruptly at c_iodine > 1 M. This suggests more constraints form in the amorphous network for the PVA-I₃^- complex II system. The constant defects fraction further reveals that the complexation prefers to happen along the tie chains. These results supply a possible formation pathway for the PVA-iodine complexes.

Role of Adsorbed Polymers on Nanoparticle Dispersion in Drying Polymer Nanocomposite Films

Polymers adsorbed on nanoparticles (NPs) are important elements that determine the dispersion of NPs in polymer nanocomposite (PNC) films. While previous studies have shown that increasing the number of adsorbed polymers on NPs can improve their dispersion during the drying process, the exact mechanism remained unclear. In this study, we investigated the role of adsorbed polymers in determining the microstructure and dispersion of NPs during the drying process. Investigation of the structural development of NPs using the synchrotron vertical-small-angle X-ray scattering technique revealed that increasing polymer adsorption suppresses bonding between the NPs at later stages of drying, when they approach each other and come in contact. On the particle length scale, NPs with large amounts of adsorbed polymers form loose clusters, whereas those with smaller amounts of adsorbed polymers form dense clusters. On the cluster length scale, loose clusters of NPs with large amounts of adsorbed polymers build densely packed aggregates, while dense clusters of NPs with small amounts of adsorbed polymers become organized into loose aggregates. The potential for the quantitative control of NP dispersion in PNC films via modification of polymer adsorption was established in this study.

Direct Structural Evidence for Interfacial Gradients in Asymmetric Polymer Nanocomposite Blends

Understanding the complex structure of polymer blends filled with nanoparticles (NPs) is key to design their macroscopic properties. Here, the spatial distribution of hydrogenated (H) and deuterated (D) polymer chains asymmetric in mass is studied by small-angle neutron scattering. Depending on the chain mass, a qualitatively new large-scale organization of poly(vinyl acetate) chains beyond the random-phase approximation is evidenced in nanocomposites with attractive polymer-silica interactions. The silica is found to systematically induce bulk segregation. Only with long H-chains, a strong scattering signature is observed in the q range of the NP size: it is the sign of interfacial isotopic enrichment, that is, of contrasted polymer shells close to the NP surface. A quantitative model describing both the bulk segregation and the interfacial gradient (over ca. 10-20 nm depending on the NP size) is developed, showing that both are of comparable strength. In all cases, NP surfaces trap the polymer blend in a non-equilibrium state, with preferential adsorption around NPs only if the chain length and isotopic preference toward the surface combine their entropic and enthalpic driving forces. This structural evidence for interfacial polymer gradients will open the road for quantitative understanding of the dynamics of many-chain nanocomposite systems.

Effect of Molecular Architecture on Conformational Relaxation of Polymer Chains at Interfaces

Dynamics of polymer chains near an interface with an inorganic material are believed to strongly affect the physical properties of polymers in nanocomposites and thin films. An effect of molecular architecture on the conformational relaxation behavior of polystyrene (PS) chains at the quartz interface using sum-frequency generation spectroscopy is reported here. The relaxation dynamics of chains in direct contact with the quartz interface is slower with a star-shaped architecture than that with its linear counterpart. The extent of the delay becomes more pronounced with increasing number of arms. This can be explained in terms of the superior interfacial activity to the quartz surface for the star-shaped PS.