X-ray studies of the structure and electronic behavior of alkanethiolate-capped gold nanoparticles: the interplay of size and surface effects

Orchestration of ferro- and anti-ferromagnetic ordering in gold nanoclusters

The unpaired electron in the gold clusters (Aun, n = no. of Au atoms) with an odd number of total electrons is solely responsible for the magnetic properties in the small-sized Au nano-clusters. However, no such unpaired electron is available due to pairing in the even number of atom gold clusters and behaving as a diamagnetic entity similar to bulk gold. In this work, we unveiled the spin-density distribution of odd Aun clusters with n = 1 to 19 that reveals that a single unpaired electron gets distributed non-uniformly among all Au-atoms depending on the cluster size and morphology. The delocalization of the unpaired electron leads to the spin dilution approaching a value of ∼1/n spin moments on each atom for the higher clusters. Interestingly, small odd-numbered gold clusters possess spin-magnetic moments similar to the delocalized spin moments as of organic radicals. Can cooperative magnetic properties be obtained by coupling these individual magnetic gold nanoparticles? In this work, by applying state-of-the-art computational methodologies, we have demonstrated ferromagnetic or anti-ferromagnetic couplings between such magnetic nanoclusters upon designing suitable organic spacers. These findings will open up a new avenue of nanoscale magnetic materials combining organic spacers and odd-electron nano-clusters.

In Vivo Toxicology of Metabolizable Atomically Precise Au25 Clusters at Ultrahigh Doses

Ultrasmall Au25(MPA)18 clusters show great potential in biocatalysts and bioimaging due to their well-defined, tunable structure and properties. Hence, in vivo pharmacokinetics and toxicity of Au nanoclusters (Au NCs) are very important for clinical translation, especially at high dosages. Herein, the in vivo hematological, tissue, and neurological effects following exposure to Au NCs (300 and 500 mg kg-1) were investigated, in which the concentration is 10 times higher than in therapeutic use. The biochemical and hematological parameters of the injected Au NCs were within normal limits, even at the ultrahigh level of 500 mg kg-1. Meanwhile, no histopathological changes were observed in the Au NC group, and immunofluorescence staining showed no obvious lesions in the major organs. Furthermore, real-time near-infrared-II (NIR-II) imaging showed that most of the Au25(MPA)18 and Au24Zn1(MPA)18 can be metabolized via the kidney. The results demonstrated that Au NCs exhibit good biosafety by evaluating the manifestation of toxic effects on major organs at ultrahigh doses, providing reliable data for their application in biomedicine.

Chemistry of the Au-Thiol Interface through the Lens of Single-Molecule Flicker Noise Measurements

Chemistry of the Au-S interface at the nanoscale is one of the most complex systems to study, as the nature and strength of the Au-S bond change under different experimental conditions. In this study, using mechanically controlled break junction technique, we probed the conductance and analyzed Flicker noise for several aliphatic and aromatic thiol derivatives and thioethers. We demonstrate that Flicker noise can be used to unambiguously differentiate between stronger chemisorption (Au-SR) and weaker physisorption (Au-SRR') type interactions. The Flicker noise measurements indicate that the gold rearrangement in chemisorbed Au-SR junctions resembles that of the Au rearrangement in pure Au-Au metal contact breaking, which is independent of the molecular backbone structure and the resulting conductance. In contrast, thioethers showed the formation of a weaker physisorbed Au-SRR' type bond, and the Flicker noise measurement indicates the changes in the Au-anchoring group interface but not the Au-Au rearrangement like that in the Au-SR case. Additionally, by employing single-molecular conductance and Flicker noise analysis, we have probed the interfacial electric field-catalyzed ring-opening reaction of cyclic thioether under mild environmental conditions, which otherwise requires harsh chemical conditions for cleavage of the C-S bond. All of our conductance measurements are complemented by NEGF transport calculations. This study illustrates that the single-molecule conductance, together with the Flicker noise measurements can be used to tune and monitor chemical reactions at the single-molecule level.

Dynamics of Pd Subsurface Hydride Formation and Their Impact on the Selectivity Control for Selective Butadiene Hydrogenation Reaction

Structure-sensitive catalyzed reactions can be influenced by a number of parameters. So far, it has been established that the formation of Pd-C species is responsible for the behavior of Pd nanoparticles employed as catalysts in a butadiene partial hydrogenation reaction. In this study, we introduce some experimental evidence indicating that subsurface Pd hydride species are governing the reactivity of this reaction. In particular, we detect that the extent of formation/decomposition of PdHx species is very sensitive to the Pd nanoparticle aggregate dimensions, and this finally controls the selectivity in this process. The main and direct methodology applied to determine this reaction mechanism step is time-resolved high-energy X-ray diffraction (HEXRD).

In Situ Spectroscopy and Microscopy Insights into the CO Oxidation Mechanism on Au/CeO2(111)

In this work, we prepared and investigated in ultra-high vacuum (UHV) two stoichiometric CeO₂(111) surfaces containing low and high amounts of step edges decorated with 0.05 ML of gold using synchrotron-radiation photoelectron spectroscopy (SRPES) and scanning tunneling microscopy (STM). The UHV study helped to solve the still unresolved puzzle on how the one-monolayer-high ceria step edges affect the metal-substrate interaction between Au and the CeO₂(111) surface. It was found that the concentration of ionic Au⁺ species on the ceria surface increases with increasing number of ceria step edges and is not correlated with the concentration of Ce³⁺ ions that are supposed to form on the surface after its interaction with gold nanoparticles. We associated this with an additional channel of Au⁺ formation on the surface of CeO₂(111) related to the interaction of Au atoms with various peroxo oxygen species formed at the ceria step edges during the film growth. The study of CO oxidation on the highly stepped Au/CeO₂(111) model sample was performed by combining near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS), UHV-STM, and near-ambient-pressure STM (NAP-STM). This powerful combination provided comprehensive information on the processes occurring on the Au/CeO₂(111) surface during the interaction with CO, O₂, and CO + O₂ (1:1) mixture at conditions close to the real working conditions of CO oxidation. It was found that the system demonstrates high stability in CO. However, the surface undergoes substantial chemical and morphological changes as the O₂ is added to the reaction cell. Already at 300 K, gold nanoparticles begin to grow using a mechanism that involves the disintegration of small gold nanoparticles in favor of the large ones. With increasing temperature, the model catalyst quickly transforms into a system of primarily large Au particles that contains no ionic gold species.

Renally Excretable Silver Telluride Nanoparticles as Contrast Agents for X-ray Imaging

The use of nanoparticles in the biomedical field has gained much attention due to their applications in biomedical imaging, drug delivery, and therapeutics. Silver telluride nanoparticles (Ag₂Te NPs) have been recently shown to be highly effective computed tomography (CT) and dual-energy mammography contrast agents with good stability and biocompatibility, as well as to have potential for many other biomedical purposes. Despite their numerous advantageous properties for diagnosis and treatment of disease, the clinical translation of Ag₂Te NPs is dependent on achieving high levels of excretion, a limitation for many nanoparticle types. In this work, we have synthesized and characterized a library of Ag₂Te NPs and identified conditions that led to 3 nm core size and were renally excretable. We found that these nanoparticles have good biocompatibility, strong X-ray contrast generation, and rapid renal clearance. Our CT data suggest that renal elimination of nanoparticles occurred within 2 h of administration. Moreover, biodistribution data indicate that 93% of the injected dose (%ID) has been excreted from the main organs in 24 h, 95% ID in 7 days, and 97% ID in 28 days with no signs of acute toxicity in the tissues studied under histological analysis. To our knowledge, this renal clearance is the best reported for Ag₂Te NP, while being comparable to the highest renal clearance reported for any type of nanoparticle. Together, the results herein presented suggest the use of GSH-Ag₂Te NPs as an X-ray contrast agent with the potential to be clinically translated in the future.

Restructuring of the gold-carbide interface for low-temperature water-gas shift

A passivated Au/α-MoC catalyst, containing 2-4 layered Au clusters of 1.6 nm, was re-activated by CH₄/H₂ at 590 °C, during which the structure of the gold-carbide interface changed considerably. The partially-oxidized surface Mo species were carburized to MoC, while the Au clusters dispersed into smaller ones, accompanied by the coating of carbide thin layers on Au. This restructuring promoted charge transfer from Au to MoC and extended the Au-MoC interfacial perimeter, which was largely responsible for the activity in the low-temperature water-gas shift reaction.

Identification and Characterization of a Au(III) Reductase from Erwinia sp. IMH

Microorganisms contribute to the formation of secondary gold (Au) deposits through enzymatic reduction of Au(III) to Au(0). However, the enzyme that catalyzes the reduction of Au(III) remains enigmatic. Here, we identified and characterized a previously unknown Au reductase (GolR) in the cytoplasm of Erwinia sp. IMH. The expression of golR was strongly up-regulated in response to increasing Au(III) concentrations and exposure time. Mutant with in-frame deletion of golR was incapable of reducing Au(III), and the capability was rescued by reintroducing wild-type golR into the mutant strain. The Au(III) reduction was determined to occur in the cytoplasmic space by comparing the TEM images of the wild-type, mutant, and complemented strains. In vitro assays of the purified GolR protein confirmed its ability to reduce Au(III) to Au nanoparticles. Molecular dynamic simulations demonstrated that the hydrophobic cavity of GolR may selectively bind AuCl₂(OH)₂ ^-, the predominant auric chloride species at neutral pH. Density functional theory calculations revealed that AuCl₂(OH)₂ ^- may be coordinated at the Fe-containing active site of GolR and is probably reduced via three consecutive proton-coupled electron transfer processes. The new class of reductase, GolR, opens the chapter for the mechanistic understanding of Au(III) bioreduction.

Nanoparticle classification, physicochemical properties, characterization, and applications: a comprehensive review for biologists

Interest in nanomaterials and especially nanoparticles has exploded in the past decades primarily due to their novel or enhanced physical and chemical properties compared to bulk material. These extraordinary properties have created a multitude of innovative applications in the fields of medicine and pharma, electronics, agriculture, chemical catalysis, food industry, and many others. More recently, nanoparticles are also being synthesized ‘biologically’ through the use of plant- or microorganism-mediated processes, as an environmentally friendly alternative to the expensive, energy-intensive, and potentially toxic physical and chemical synthesis methods. This transdisciplinary approach to nanoparticle synthesis requires that biologists and biotechnologists understand and learn to use the complex methodology needed to properly characterize these processes. This review targets a bio-oriented audience and summarizes the physico–chemical properties of nanoparticles, and methods used for their characterization. It highlights why nanomaterials are different compared to micro- or bulk materials. We try to provide a comprehensive overview of the different classes of nanoparticles and their novel or enhanced physicochemical properties including mechanical, thermal, magnetic, electronic, optical, and catalytic properties. A comprehensive list of the common methods and techniques used for the characterization and analysis of these properties is presented together with a large list of examples for biogenic nanoparticles that have been previously synthesized and characterized, including their application in the fields of medicine, electronics, agriculture, and food production. We hope that this makes the many different methods more accessible to the readers, and to help with identifying the proper methodology for any given nanoscience problem.

The synergistic effect of Hf-O-Ru bonds and oxygen vacancies in Ru/HfO2 for enhanced hydrogen evolution

Ru nanoparticles have been demonstrated to be highly active electrocatalysts for the hydrogen evolution reaction (HER). At present, most of Ru nanoparticles-based HER electrocatalysts with high activity are supported by heteroatom-doped carbon substrates. Few metal oxides with large band gap (more than 5 eV) as the substrates of Ru nanoparticles are employed for the HER. By using large band gap metal oxides substrates, we can distinguish the contribution of Ru nanoparticles from the substrates. Here, a highly efficient Ru/HfO₂ composite is developed by tuning numbers of Ru-O-Hf bonds and oxygen vacancies, resulting in a 20-fold enhancement in mass activity over commercial Pt/C in an alkaline medium. Density functional theory (DFT) calculations reveal that strong metal-support interaction via Ru-O-Hf bonds and the oxygen vacancies in the supported Ru samples synergistically lower the energy barrier for water dissociation to improve catalytic activities.

Although ruthenium nanomaterials have proven to be effective catalysts for H₂ evolution, there is still room for activity improvements. Here, authors develop an efficient Ru/HfO₂ electrocatalyst with tuned Ru-O-Hf bonds and oxygen vacancies that shows high activities for alkaline H₂ evolution.

Science-society-policy interface for microplastic and nanoplastic: Environmental and biomedical aspects

The global concern over the possible consequences of the downsizing of plastic to microplastics (MPs) and nano plastics (NPs) needs to be addressed with a new conceptual framework. The transformation of plastics to MPs and NPs can be discussed in terms of fundamental physics principles applicable to micro and nanophase matter and colloidal science principles. Further, accurate and reliable detection and characterization of MPs and NPs are crucial for an extensive understanding of their environmental and ecological impacts. The other decisive factor that can classify MPs and NPs as hazardous to existing nanomaterials is discussing the cytotoxicity study on human cell lines. The human health risk assessment that might arise from the ingestion of MPs and NPs can be addressed about contrast agents used for medical imaging. However, the lack of standard analytical techniques for MPs and NPs measurement is an emerging challenge for analytical scientists due to their complex physicochemical properties, especially in environmental samples. This review article navigates readers through the point of origin of MPs and NPs and their interdisciplinary aspects. Biomedical applications of plastics and concerns over the toxicity of MPs and NPs are further analyzed. Moreover, the analytical challenges of MPs and NPs have been discussed with critical inputs. Finally, the worldwide efforts being made for creating a common platform of discussion on a different aspect of plastic pollution were taken into account.

All Hydroxyl-Thiol-Protected Gold Nanoclusters with Near-Neutral Surface Charge

Hydrophilic gold nanoclusters (Au NCs) whose physical and chemical properties are not susceptible to large changes in pH are greatly desired for diverse applications. Here, we design Au NCs protected by a hydroxyl-thiol ligand (e.g., 1-thioglycerol (TG)) with a molecular formula of Au₃₄(TG)₂₂ as a proof-of-concept for a Au NC model with near-neutral surface charge. Unlike hydrophilic thiols with charged functional groups (e.g., carboxylate-thiol) that are usually used for hydrophilic Au NCs, this type of Au NCs is protected by hydroxyl-thiols, which are less susceptible to the prevailing pH conditions as the hydroxyl group is less acidic than water. More interestingly, the resulting Au NCs also possess pH-independent fluorescence intensity, making them suitable for applications under strong acidic conditions, which are currently not available in the reported hydrophilic Au NCs.

Modification of Gold Zeolitic Supports for Catalytic Oxidation of Glucose to Gluconic Acid

Activity of gold supported catalysts strongly depends on the type and composition of support, which determine the size of Au nanoparticles (Au NPs), gold-support interaction influencing gold properties, interaction with the reactants and, in this way, the reaction pathway. The aim of this study was to use two types of zeolites: the three dimensional HBeta and the layered two-dimensional MCM-36 as supports for gold, and modification of their properties towards the achievement of different properties in oxidation of glucose to gluconic acid with molecular oxygen and hydrogen peroxide. Such an approach allowed establishment of relationships between the activity of gold catalysts and different parameters such as Au NPs size, electronic properties of gold, structure and acidity of the supports. The zeolites were modified with (3-aminopropyl)-trimethoxysilane (APMS), which affected the support features and Au NPs properties. Moreover, the modification of the zeolite lattice with boron was applied to change the strength of the zeolite acidity. All modifications resulted in changes in glucose conversion, while maintaining high selectivity to gluconic acid. The most important findings include the differences in the reaction steps limiting the reaction rate depending on the nature of the oxidant applied (oxygen vs. H₂O₂), the important role of porosity of the zeolite supports, and accumulation of negative charge on Au NPs in catalytic oxidation of glucose.

Inverse heavy-atom effect in near infrared photoluminescent gold nanoclusters

Fluorophores functionalized with heavy elements show enhanced intersystem crossing due to increased spin-orbit coupling, which in turn shortens the fluorescence decay lifetime (τPL). This phenomenon is known as the heavy-atom effect (HAE). Here, we report the observation of increased τPL upon functionalisation of near-infrared photoluminescent gold nanoclusters with iodine. The heavy atom-mediated increase in τPL is in striking contrast with the HAE and referred to as inverse HAE. Femtosecond and nanosecond transient absorption spectroscopy revealed overcompensation of a slight decrease in lifetime of the transition associated with the Au core (ps) by a large increase in the long-lived triplet state lifetime associated with the Au shell, which contributed to the observed inverse HAE. This unique observation of inverse HAE in gold nanoclusters provides the means to enhance the triplet excited state lifetime.

Single-atom level determination of 3-dimensional surface atomic structure via neural network-assisted atomic electron tomography

Functional properties of nanomaterials strongly depend on their surface atomic structures, but they often become largely different from their bulk structures, exhibiting surface reconstructions and relaxations. However, most of the surface characterization methods are either limited to 2D measurements or not reaching to true 3D atomic-scale resolution, and single-atom level determination of the 3D surface atomic structure for general 3D nanomaterials still remains elusive. Here we demonstrate the measurement of 3D atomic structure at 15 pm precision using a Pt nanoparticle as a model system. Aided by a deep learning-based missing data retrieval combined with atomic electron tomography, the surface atomic structure was reliably measured. We found that <\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$100$$\end{document}100> and <\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$111$$\end{document}111> facets contribute differently to the surface strain, resulting in anisotropic strain distribution as well as compressive support boundary effect. The capability of single-atom level surface characterization will not only deepen our understanding of the functional properties of nanomaterials but also open a new door for fine tailoring of their performance.

Precise determination of surface atomic structure of metallic nanoparticles is key to unlock their surface/interface properties. Here the authors introduce a neural network-assisted atomic electron tomography approach that provides a three-dimensional reconstruction of metallic nanoparticles at individual atom level.

Tuning the Photothermal Effect of Carboxylated-Coated Silver Nanoparticles through pH-Induced Reversible Aggregation

The photothermal response of mercaptoundecanoic acid (MUA)-coated Ag nanoparticles (Ag@MUA NPs) in both aqueous dispersions and paper substrates was determined as a function of pH when irradiated with a green laser or a blue LED source. Aqueous dispersions of Ag@MUA NPs showed an aggregation behavior by acidification that was used for the formation of NPs clusters of variable sizes. Aggregation was induced by changing the pH across the apparent pK_a of the acid, higher than the pK_a of the free acid. Formation of these aggregates was completely reversible allowing the return to the well-dispersed initial state by simply increasing the pH by the addition of a base. Aggregation produced a shift of the plasmon band that changed the spectra of the dispersions and their ability to be remotely heated when irradiated with visible light. These aggregates could be transferred to paper by simple impregnation of the substrates with the dispersion. On the solid substrate, a higher photothermal response than in the liquid medium was observed. A high local increase of up to 75 °C could be recorded on paper after only 30 s of irradiation with a green laser, whereas a blue LED array was enough for inducing the melting of a solid paraffin (T_m = 36-38 °C) deposited on it. This work demonstrates that photothermal heating can be controlled by the reversible aggregation of NPs to induce different thermal responses in liquid and solid media.

Direct Observation of a Plasmon-Induced Hot Electron Flow in a Multimetallic Nanostructure

Plasmon hot carriers are interesting for photoredox chemical synthesis but their direct utilization is limited by their ultrafast thermalization. Therefore, they are often transferred to suitable accepting materials that expedite their lifetime. Solid-state photocatalysts are technologically more suitable than their molecular counterparts, but their photophysical processes are harder to follow due to the absence of clear optical fingerprints. Herein, the journey of hot electrons in a solid-state multimetallic photocatalyst is revealed by a combination of ultrafast visible and infrared spectroscopy. Dynamics showed that electrons formed upon silver plasmonic excitation reach the gold catalytic site within 700 fs and the electron flow could also be reversed. Gold is the preferred site until saturation of its 5d band occurs. Silver-plasmon hot electrons increased the rate of nitrophenol reduction 16-fold, confirming the preponderant role of hot electrons in the overall catalytic activity and the importance to follow hot carriers' journeys in solid-state photosystems.

Ultrathin Quasibinary Heterojunctioned ReS2/MoS2 Film with Controlled Adhesion from a Bimetallic Co-Feeding Atomic Layer Deposition

Heterojunctioned transition-metal dichalcogenide (TMD) films with regulatable interface adhesion have shown broad application prospects in the design of advanced materials and the manufacturing of novel functional devices. To date, the controlled fabrication of TMD heterojunctions or heterojunction-rich films with tailorable thickness and composition has proved challenging. Herein, a bimetallic co-feeding atomic layer deposition (ALD) system was developed capable of fulfilling these requirements. In the co-feeding ALD fabrication, by adjusting the Re/Mo ratio, 3-layered quasibinary heterojunctioned ReS₂/MoS₂ films with adjustable composition and grain size were prepared. Moreover, the measurements between atomic force microscopy Si tip coated with the ReS₂/MoS₂ films and films on the substrate indicate that the adhesion force can be regulated from 13.5 to 136.3 nN. Further experimental data and theoretical analysis show that the adhesion force between the coated tip and films possesses a positive correlation with the "tip-film unanimity" in composition.

Site-Dependent Spin Delocalization and Evidence of Ferrimagnetism in Atomically Precise Au25(SR)180 Clusters as Seen by Solution 13C NMR Spectroscopy

We report a simple but detailed solution ¹³C nuclear magnetic resonance spectroscopic study of atomically precise neutral Au₂₅(SR)₁₈⁰ (SR = alkyl thiolate) clusters. The paramagnetic ¹³C Knight shift of alkyl chain carbons, which is proportional to the local electron spin density, exhibits an electron spin delocalization that exponentially decays along the alkyl chain. The magnitude and decay constant of the observed electron spin delocalization, although largely independent of alkyl chain length, depend on where, that is, "in" versus "out" (vide infra) position, the alkyl chain is bound, in agreement with density functional theory calculations. Notably, the determined position-dependent decay constants, 1.70/Å and 0.41/Å for "in" and "out" ligands, respectively, not only could have important ramifications in molecular spintronics but are also comparable to measured decay constants in molecular electrical conductance of alkyl chains, potentially offering an alternative, simple method for estimating the latter. Moreover, the negative intercept temperatures of linear fits of reciprocal ¹³C (as well its bound ¹H) Knight shift versus temperature strongly suggest the existence of local ferrimagnetism in individual Au₂₅(SR)₁₈⁰ clusters.

A facile approach for rapid on-site screening of nicotine in natural tobacco

Nicotine (Nic) exposed to the environment which comes from tobacco products is the main addictive agent and specific classes of hazardous compound that merit concern. In this study, we have established a fast and reliable method to achieve specific detection of Nic in natural nicotiana tabacum within 30 s through a miniaturized platform based on screen printed gold electrode (SPE). A simple electrochemical pretreatment mean was employed on gold surface that led to the exposure of Au (111) facet and a convenient sample pretreatment method was adopted to realize the extraction of Nic in tobacco. The present electrochemical sensor exhibits an ample range of sensing from 10 μg/g to 200 μg/g, which is able to compliance with tobacco industry testing standards of actual samples. Over 60 sampling points from different origins in China or other countries were performed with direct analysis using this method and satisfactory results have been obtained. The proposed approach was demonstrated to be a very promising platform for significantly improving analytical efficiency in laboratories as well as for monitoring the source reduction control of Nic in the environment.

Enhanced Ferromagnetism from Organic-Cerium Oxide Hybrid Ultrathin Nanosheets

Room-temperature ferromagnetism in two-dimensional (2D) oxide materials is an intriguing phenomenon for spintronic applications. Here, we report significantly enhanced room-temperature ferromagnetism observed from ultrathin cerium oxide nanosheets hybridized with organic surfactant molecules. The hybrid nanosheets were synthesized by ionic layer epitaxy over a large area at the water-air interface. The nanosheets exhibited a saturation magnetization of 0.149 emu/g as their thickness reduced to 0.67 nm. This value was 5 times higher than that for CeO₂ thin films and more than 20 times higher than that for CeO₂ nanoparticles. The magnetization was attributed to the high concentration (15.5%) of oxygen vacancies stabilized by surfactant hybridization as well as electron transfer between organic and oxide layers. This work brings an effective strategy of introducing strong ferromagnetism to functional oxide materials, which leads to a promising route toward exploring new physical properties in 2D hybrid nanomaterials.

Negative Thermal Expansion in Nanosolids

Nanosolids usually exhibit a variety of peculiar physical features due to the size effect. The unique surface electronic states and coordination structures of nanosolids make them particularly important as promising functional materials. After several decades of research effort on the preparation processes and formation mechanisms of nanomaterials, the attention of nanoscience has been shifted to their functionalization and utilization. In the development of nanodevices, the thermal expansion matching between nanosized components is becoming increasingly important for the selection of units and design of nanodevices. In nanosolids, particularities of bonding features and coordination environments lead to size-dependent thermal expansion behavior that is significantly different from the behavior of their bulk counterparts. Thus, size tuning becomes one of the most efficient techniques in tailoring lattice thermal expansion. Unlike the traditional tailoring methods like chemical doping, the modification of chemical bonds and lattice vibration modes mainly contributing to the abnormal thermal expansion of nanosolids can be realized by adjustment of local coordination on the surface and surface/interface lattice strain. With the introduction of the nanosizing effect, the functional properties of nanosolids can be thoroughly remolded, which provides a huge space for functional applications of negative thermal expansion (NTE) nanosolids. However, understanding the origin of novel thermal expansion in nanosolids remains a challenging issue because of the lack of knowledge of precise atomic arrangements at both long-range and local structure levels. In this Account, by virtue of various advanced characterization techniques, we provide a comprehensive understanding at the atomic level of the abnormal thermal expansion behaviors in nanosized PbTiO₃-based compounds, oxides, fluorides, and bimetallic alloys. Our results demonstrate that nanoscale structural features can be used to alter the spontaneous polarization, surficial/interfacial coordination, local lattice symmetry, and elemental distribution, resulting in the crossover of thermal expansion from the bulk and the generation of zero thermal expansion (ZTE). Furthermore, structural peculiarities in nanosolids, e.g., the lack of long-range coherence, abnormal surficial/interfacial bonding, lattice imperfection, and distribution of local phases, open the door for local-scale manipulations of the physical properties of electronic structure and lattice vibration during adjustment of thermal expansion. For the development of nanodevices with high thermostability, atomic-level information on the nanostructure thermal evolution provides a guideline for intelligent designs of the functional components and matrix. Understanding of the structural transformation in nanosolids will help future exploration of functional nanomaterials based on short-range atomistic design and optimization.

Octahedral gold-silver nanoframes with rich crystalline defects for efficient methanol oxidation manifesting a CO-promoting effect

Three-dimensional bimetallic nanoframes with high spatial diffusivity and surface heterogeneity possess remarkable catalytic activities owing to their highly exposed active surfaces and tunable electronic structure. Here we report a general one-pot strategy to prepare ultrathin octahedral Au₃Ag nanoframes, with the formation mechanism explicitly elucidated through well-monitored temporal nanostructure evolution. Rich crystalline defects lead to lowered atomic coordination and varied electronic states of the metal atoms as evidenced by extensive structural characterizations. When used for electrocatalytic methanol oxidation, the Au₃Ag nanoframes demonstrate superior performance with a high specific activity of 3.38 mA cm⁻², 3.9 times that of the commercial Pt/C. More intriguingly, the kinetics of methanol oxidation on the Au₃Ag nanoframes is counter-intuitively promoted by carbon monoxide. The enhancement is ascribed to the altered reaction pathway and enhanced OH⁻ co-adsorption on the defect-rich surfaces, which can be well understood from the d-band model and comprehensive density functional theory simulations.

Direct methanol fuel cells are promising for clean, sustainable energy, but catalysts should be optimized. Here the authors construct ultrathin nanoframes with rich crystalline defects to increase electrocatalytic activity of gold for methanol oxidation, which is surprisingly promoted by carbon monoxide.

Ultrasensitive Detection of Hepatotoxic Microcystin Production from Cyanobacteria Using Surface-Enhanced Raman Scattering Immunosensor

Microcystin-LR (MC-LR) is considered the most common hazardous toxin produced during harmful algal blooms. In addition to potential risk of long-term exposure to low concentrations in drinking water, acute toxicity due to MC-LR resulting from algal blooms could result in fatalities in rare cases. Although several methods are currently available to detect MC-LR, development of a low-cost, ultrasensitive measurement method would help limit exposure by enabling early detection and continuous monitoring of MC-LR. Here, we develop a surface-enhanced Raman scattering (SERS) spectroscopic immunosensor for detection and quantification of the hepatotoxic MC-LR toxin in aquatic settings with excellent robustness, selectivity, and sensitivity. We demonstrate that the developed SERS sensor can reach a limit of detection (0.014 μg/L) at least 1 order of magnitude lower and display a linear dynamic detection range (0.01 μg/L to 100 μg/L) 2 orders of magnitude wider in comparison to the commercial enzyme-linked immunosorbent assay test. The superior analytical performance of this SERS immunosensor enables monitoring of the dynamic production of MC-LR from a Microcystis aeruginosa culture. We believe that the present method could serve as a useful tool for detection of hepatotoxic microcystin toxins in various aquatic settings such as drinking water, lakes, and reservoirs. Further development of this technique could result in single-cell microcystin resolution or real-time monitoring to mitigate the associated toxicity and economic loss.

An ultra-stable gold-coordinated protein cage displaying reversible assembly

Symmetrical protein cages have evolved to fulfil diverse roles in nature, including compartmentalization and cargo delivery¹, and have inspired synthetic biologists to create novel protein assemblies via the precise manipulation of protein-protein interfaces. Despite the impressive array of protein cages produced in the laboratory, the design of inducible assemblies remains challenging^2,3. Here we demonstrate an ultra-stable artificial protein cage, the assembly and disassembly of which can be controlled by metal coordination at the protein-protein interfaces. The addition of a gold (I)-triphenylphosphine compound to a cysteine-substituted, 11-mer protein ring triggers supramolecular self-assembly, which generates monodisperse cage structures with masses greater than 2 MDa. The geometry of these structures is based on the Archimedean snub cube and is, to our knowledge, unprecedented. Cryo-electron microscopy confirms that the assemblies are held together by 120 S-Auⁱ-S staples between the protein oligomers, and exist in two chiral forms. The cage shows extreme chemical and thermal stability, yet it readily disassembles upon exposure to reducing agents. As well as gold, mercury(II) is also found to enable formation of the protein cage. This work establishes an approach for linking protein components into robust, higher-order structures, and expands the design space available for supramolecular assemblies to include previously unexplored geometries.

Low-Temperature Magnetism in Nanoscale Gold Revealed through Variable-Temperature Magnetic Circular Dichroism Spectroscopy

The low-temperature (0.35-4.2 K) steady-state electronic absorption of the monolayer-protected cluster (MPC) Au₁₀₂( pMBA)₄₄ was studied using magnetic circular dichroism (MCD) spectroscopy to investigate previously reported low-temperature (<50 K) magnetism in d¹⁰ nanogold systems. Variable-temperature variable-field analysis of resolvable MCD extinction components revealed two distinct magnetic anisotropic behaviors. A low-energy, diamagnetic component was correlated to excitation from states localized to the passivating ligands. A high-energy, paramagnetic component was attributed to excitation from the d-band of the Au core. The temperature dependence of the magnetic anisotropy for each component is discussed in terms of previously reported structural parameters of the atomically precise Au₁₀₂( pMBA)₄₄ MPC. It is concluded that temperature-sensitive structure-dependent Au d-d orbital interactions result in the promotion of 5d-band electrons to the 6sp-band via orbital rehybridization, inducing a 15× increase in the Landé g-factor over the temperature range spanning from 0.35 to 4.2 K.

Continuous synthesis of gold nanoparticles in micro- and millifluidic systems

Gold nanomaterials have diverse applications ranging from healthcare and nanomedicine to analytical sciences and catalysis. Microfluidic and millifluidic reactors offer multiple advantages for their synthesis and manufacturing, including controlled or fast mixing, accurate reaction time control and excellent heat transfer. These advantages are demonstrated by reviewing gold nanoparticle synthesis strategies in flow devices. However, there are still challenges to be resolved, such as reactor fouling, particularly if robust manufacturing processes are to be developed to achieve the desired targets in terms of nanoparticle size, size distribution, surface properties, process throughput and robustness. Solutions to these challenges are more effective through a coordinated approach from chemists, engineers and physicists, which has at its core a qualitative and quantitative understanding of the synthesis processes and reactor operation. This is important as nanoparticle synthesis is complex, encompassing multiple phenomena interacting with each other, often taking place at short timescales. The proposed methodology for the development of reactors and processes is generic and contains various interconnected considerations. It aims to be a starting point towards rigorous design procedures for the robust and reproducible continuous flow synthesis of gold nanoparticles.

Graphical Abstract:

The structure and bonding properties of tiopronin-protected silver nanoparticles as studied by X-ray absorption spectroscopy

Thiolate-protected Ag nanoparticles (NPs) exhibit interesting physical and chemical properties which may lead to various sensing, diagnostic, and therapeutic applications. Further, understanding structure–property relationships of Ag NPs is of great interest to optimize their application. Herein, we used TEM, UV–vis, and a series of synchrotron X-ray spectroscopy techniques to probe the local structure and chemical bonding properties of thiolate-stabilized Ag NPs. Compared with other Ag nanostructures prepared under slightly modified conditions, the Ag NPs were found to have pronounced structural changes, which led to immensely different optical properties. Notably, the NPs were also found to have similar surface structure to recently elucidated Ag nanoclusters prepared with different thiolates. These findings suggest that the NP structure and optical properties can be sensitively tailored by controlling the synthetic conditions. The multi-element, multi-core excitation approach (i.e., Ag K-, Ag L3-, and S K-edges) employed in the X-ray absorption spectroscopy measurements was also demonstrated as an effective tool to uncover the NP structure from both the metal core and the ligand shell perspectives.

Sputter Deposition toward Short Cationic Thiolated Fluorescent Gold Nanoclusters: Investigation of Their Unique Structural and Photophysical Characteristics Using High-Performance Liquid Chromatography

We herein present the preparation of short, bulky cationic thiolate (thiocholine)-protected fluorescent Au nanoclusters via sputter deposition over a liquid polymer matrix. The obtained Au nanoclusters showed near-infrared fluorescence and had an average core diameter of 1.7 ± 0.6 nm, which is too large compared to that of the reported fluorescent Au nanoclusters prepared via chemical means. We revealed the mechanism of formation of this unique material using single-particle electron microscopy, optical measurements, X-ray photoelectron spectroscopy (XPS), and high-performance liquid chromatography fractionations. The noncrystallized image was observed via single-particle high-angle annular dark-field scanning transmission electron microscopy observations and compared with chemically synthesized crystalline Au nanoparticle with the same diameter, which demonstrated the unique structural characteristic speculated via XPS. The size fractionation and size-dependent fluorescence measurement, together with other observations, indicated that the nanoclusters most probably contained a mixture of very small fluorescent species in their aggregated form and were derived from the sputtering process itself and not from the interaction between thiol ligands.

Monitoring Thiol-Ligand Exchange on Au Nanoparticle Surfaces

Surface functionalization of nanoparticles (NPs) plays a crucial role in particle solubility and reactivity. It is vital for particle nucleation and growth as well as for catalysis. This raises the quest for functionalization efficiency and new approaches to probe the degree of surface coverage. We present an (in situ) proton nuclear magnetic resonance (¹H NMR) study on the ligand exchange of oleylamine by 1-octadecanethiol as a function of the particle size and repeated functionalization on Au NPs. Ligand exchange is an equilibrium reaction associated with Nernst distribution, which often leads to incomplete surface functionalization following "standard" literature protocols. Here, we show that the surface coverage with the ligand depends on the (i) repeated exchange reactions with large ligand excess, (ii) size of NPs, that is, the surface curvature and reactivity, and (iii) molecular size of the ligand. As resonance shifts and extensive line broadening during and after the ligand exchange impede the evaluation of ¹H NMR spectra, one- and two-dimensional ¹⁹F NMR techniques (correlation spectroscopy and diffusion ordered spectroscopy) with 1H,1H,2H,2H-perfluorodecanthiol as the fluorinated thiol ligand were employed to study the reactions. The enhanced resolution associated with the spectral range of the ¹⁹F nucleus allowed carrying out a site-specific study of thiol chemisorption. The widths and shifts of the resonance signals of the different fluorinated carbon moieties were correlated with the distance to the thiol anchor group. In addition, the diffusion analysis revealed that moieties closer to the NP surface are characterized by a broader diffusion coefficient distribution as well as slower diffusion.

Synergistic Effects in CNTs-PdAu/Pt Trimetallic Nanoparticles with High Electrocatalytic Activity and Stability

We present a straightforward physical approach for synthesizing multiwalled carbon nanotubes (CNTs)-PdAu/Pt trimetallic nanoparticles (NPs), which allows predesign and control of the metal compositional ratio by simply adjusting the sputtering targets and conditions. The small-sized CNTs-PdAu/Pt NPs (~3 nm, Pd/Au/Pt ratio of 3:1:2) act as nanocatalysts for the methanol oxidation reaction (MOR), showing excellent performance with electrocatalytic peak current of 4.4 A mgPt -1 and high stability over 7000 s. The electrocatalytic activity and stability of the PdAu/Pt trimetallic NPs are much superior to those of the corresponding Pd/Pt and Au/Pt bimetallic NPs, as well as a commercial Pt/C catalyst. Systematic investigation of the microscopic, crystalline, and electronic structure of the PdAu/Pt NPs reveals alloying and charge redistribution in the PdAu/Pt NPs, which are responsible for the promotion of the electrocatalytic performance.

Local Structural Distortion Induced Uniaxial Negative Thermal Expansion in Nanosized Semimetal Bismuth

The corrugated layer structure bismuth has been successfully tailored into negative thermal expansion along c axis by size effect. Pair distribution function and extended X-ray absorption fine structure are combined to reveal the local structural distortion for nanosized bismuth. The comprehensive method to identify the local structure of nanomaterials can benefit the regulating and controlling of thermal expansion in nanodivices.