Wetting and contact lines of micrometer-sized ellipsoids

Characterization of Particle Transport and Deposition Due to Heterogeneous Dewetting on Low-Cost Inkjet-Printed Devices

This work investigates the deposition patterns left by evaporating particle-laden droplets on heterogeneous surfaces with spatially varying wettability. Spatial differences in receding contact angles give rise to scalloped-shaped contact lines. During evaporation, the contact line recedes in one location and remains pinned in another. This nonuniform contact line recession results in particle self-assembly above areas where the contact line remains pinned but not where it recedes. This behavior is fairly robust across a variety of particle sizes, concentrations, and device geometries. We hypothesize that particle self-assembly in these cases is due to the competition between particle diffusion and evaporative-driven advective flow. Diffusion appears to be more pronounced in regions where the contact line recedes, while advection appears to be more pronounced near the pinned portion of the contact line. As such, particles appear to diffuse away from receding areas and toward pinned areas, where advection transports them to the contact line. The distribution of particle deposition above the pinned regions was influenced by the particle size and the concentration of particles in the droplet. Similar to homogeneous surfaces, deposition was more prevalent at the pinned portion of the contact line for smaller particles and lower concentrations and more uniformly distributed across the entire pinned region for larger particles and higher concentrations. A better understanding of this process may be beneficial in a wide variety of particle separation applications, such as printing, cell patterning, biosensing, and anti-icing.

Nanoscale Porosity in Microellipsoids Cloaks Interparticle Capillary Attraction at Fluid Interfaces

Anisotropic particles pinned at fluid interfaces tend toward disordered multiparticle configurations due to large, orientationally dependent, capillary forces, which is a significant barrier to exploiting these particles to create functional self-assembled materials. Therefore, current interfacial assembly methods typically focus on isotropic spheres, which have minimal capillary attraction and no dependence on orientation in the plane of the interface. In order to create long-range ordered structures with complex configurations via interfacially trapped anisotropic particles, control over the interparticle interaction energy via external fields and/or particle engineering is necessary. Here, we synthesize colloidal ellipsoids with nanoscale porosity and show that their interparticle capillary attraction at a water-air interface is reduced by an order of magnitude compared to their smooth counterparts. This is accomplished by comparing the behavior of smooth, rough, and porous ellipsoids at a water-air interface. By monitoring the dynamics of two particles approaching one another, we show that the porous particles exhibit a much shorter-range capillary interaction potential, with scaling intriguingly different than theory describing the behavior of smooth ellipsoids. Further, interferometry measurements of the fluid deformation surrounding a single particle shows that the interface around porous ellipsoids does not possess the characteristic quadrupolar symmetry of smooth ellipsoids, and quantitatively confirms the decrease in capillary interaction energy. By engineering nanostructured surface features in this fashion, the interfacial capillary interactions between particles may be controlled, informing an approach for the self-assembly of complex two-dimensional microstructures composed of anisotropic particles.

Three-Dimensional Coffee-Ring Effect Induced Deposition on Foam Surface for Enhanced Photothermal Conversion

Uniformly depositing a thin layer of functional constituents on porous foam is attractive to realize their concentrated interfacial application. Here, a simple but robust polyvinyl alcohol (PVA)-mediated evaporation drying strategy to achieve uniform surface deposition on melamine foam (MF) is introduced. Solutes can be accumulated homogeneously to the surface periphery of MF due to the enhanced coffee-ring effect of PVA and its stabilizing effect on various functional constituents, including molecules and colloidal particles. The deposition thickness is positively correlated with the feeding amounts of PVA but seems to be independent of drying temperature. 3D outward capillary flow driven by the combination of contact surface pinning and continual interfacial evaporation induces the forming of core-shell foams. The enhanced interfacial photothermal effect and solar desalination performance using PVA/polypyrrole-coated MF as a Janus solar evaporator are demonstrated.

Capillary Assembly of Anisotropic Particles at Cylindrical Fluid-Fluid Interfaces

The unique behavior of colloids at liquid interfaces provides exciting opportunities for engineering the assembly of colloidal particles into functional materials. The deformable nature of fluid-fluid interfaces means that we can use the interfacial curvature, in addition to particle properties, to direct self-assembly. To this end, we use a finite element method (Surface Evolver) to study the self-assembly of rod-shaped particles adsorbed at a simple curved fluid-fluid interface formed by a sessile liquid drop with cylindrical geometry. Specifically, we study the self-assembly of single and multiple rods as a function of drop curvature and particle properties such as shape (ellipsoid, cylinder, and spherocylinder), contact angle, aspect ratio, and chemical heterogeneity (homogeneous and triblock patchy). We find that the curved interface allows us to effectively control the orientation of the rods, allowing us to achieve parallel, perpendicular, or novel obliquely orientations with respect to the cylindrical drop. In addition, by tuning particle properties to achieve parallel alignment of the rods, we show that the cylindrical drop geometry favors tip-to-tip assembly of the rods, not just for cylinders, but also for ellipsoids and triblock patchy rods. Finally, for triblock patchy rods with larger contact line undulations, we can achieve strong spatial confinement of the rods transverse to the cylindrical drop due to the capillary repulsion between the contact line undulations of the particle and the pinned contact lines of the sessile drop. Our capillary assembly method allows us to manipulate the configuration of single and multiple rod-like particles and therefore offers a facile strategy for organizing such particles into useful functional materials.

Retardation of Capillary Force between Janus Particles at the Oil-Water Interface

Interactions among colloidal particles govern the hierarchical microstructure and its physical properties. Here, optical laser tweezers and Monte Carlo simulations are used to evaluate the effects of azimuthal rotation of Janus particles at the oil-water interface on interparticle interactions. We find that the capillary-induced attractive force between two Janus particles at the interface can be relaxed by azimuthal rotation around the critical separation region, at which the capillary force is ∼0.053 pN. Force relaxation leads to a decrease in capillary force around the critical separation region, resulting in a slight increase in the scaling exponent, compared to the theoretical prediction.

Recent Advances on Pickering Emulsions Stabilized by Diverse Edible Particles: Stability Mechanism and Applications

Pickering emulsions, which are stabilized by particles, have gained considerable attention recently because of their extreme stability and functionality. A food-grade particle is preferred by the food or pharmaceutical industries because of their noteworthy natural benefits (renewable resources, ease of preparation, excellent biocompatibility, and unique interfacial properties). Different edible particles are reported by recent publications with distinct shapes resulting from the inherent properties of raw materials and fabrication methods. Furthermore, they possess distinct interfacial properties and functionalities. Therefore, this review provides a comprehensive overview of the recent advances in the stabilization of Pickering emulsions using diverse food-grade particles, as well as their possible applications in the food industry.

Using adsorption kinetics to assemble vertically aligned nanorods at liquid interfaces for metamaterial applications

Vertically aligned monolayers of metallic nanorods have a wide range of applications as metamaterials or in surface enhanced Raman spectroscopy. However the fabrication of such structures using current top-down methods or through assembly on solid substrates is either difficult to scale up or have limited possibilities for further modification after assembly. The aim of this paper is to use the adsorption kinetics of cylindrical nanorods at a liquid interface as a novel route for assembling vertically aligned nanorod arrays that overcomes these problems. Specifically, we model the adsorption kinetics of the particle using Langevin dynamics coupled to a finite element model, accurately capturing the deformation of the liquid meniscus and particle friction coefficients during adsorption. We find that the final orientation of the cylindrical nanorod is determined by their initial attack angle when they contact the liquid interface, and that the range of attack angles leading to the end-on state is maximised when nanorods approach the liquid interface from the bulk phase that is more energetically favorable. In the absence of an external field, only a fraction of adsorbing nanorods end up in the end-on state (≲40% even for nanorods approaching from the energetically favourable phase). However, by pre-aligning the metallic nanorods with experimentally achievable electric fields, this fraction can be effectively increased to 100%. Using nanophotonic calculations, we also demonstrate that the resultant vertically aligned structures can be used as epsilon-near-zero and hyperbolic metamaterials. Our kinetic assembly method is applicable to nanorods with a range of diameters, aspect ratios and materials and therefore represents a versatile, low-cost and powerful platform for fabricating vertically aligned nanorods for metamaterial applications.

Photothermally responsive Pickering emulsions stabilised by polydopamine nanobowls

Pickering emulsions with stimuli responsive properties have attracted mounting research attention owing to their potential for on-demand destabilisation of emulsions. However, a combination of biocompatibility and long-term stability are essential to efficiently apply such systems in biomedical applications, and this remains a significant challenge. To address current limitations, here we report the formation of photothermally responsive oil-in-water (o/w) Pickering emulsions fabricated using biocompatible stabilisers and showing prolonged stability. For the first time, we explore polydopamine (PDA) bowl-shaped mesoporous nanoparticles (PDA nanobowls) as a Pickering stabiliser without any surface modification or other stabiliser present. As-prepared PDA nanobowl-stabilised Pickering emulsions are shown to be pH responsive, and more significantly show high photothermal efficiency under near-infrared illumination due the incorporation of PDA into the system, which has remarkable photothermal response. These biocompatible, photothermally responsive o/w Pickering emulsion systems show potential in controlled drug release applications stimulated by NIR illumination.

Photoswitchable Surfactant-Driven Reversible Shape- and Color-Changing Block Copolymer Particles

Polymer particles that switch their shape and color in response to light are of great interest for the development of programmable smart materials. Herein, we report block copolymer (BCP) particles with reversible shapes and colors activated by irradiation with ultraviolet (UV) and visible lights. This shape transformation of the BCP particles is achieved by a spiropyran-dodecyltrimethylammoium bromide (SP-DTAB) surfactant that changes its amphiphilicity upon photoisomerization. Under UV light (365 nm) irradiation, the hydrophilic ring-opened merocyanine form of the SP-DTAB surfactant affords the formation of spherical, onion-like BCP particles. In contrast, when exposed to visible light, surfactants with the ring-closed form yield prolate or oblate BCP ellipsoids with axially stacked nanostructures. Importantly, the change in BCP particle morphology between spheres and ellipsoids is reversible over multiple UV and visible light irradiation cycles. In addition, the shape- and color-switchable BCP particles are integrated to form a composite hydrogel, demonstrating their potential as high-resolution displays with reversible patterning capabilities.

Robust Hydrogen Production via Pickering Interfacial Catalytic Photoreforming of n-Octanol-Water Biphasic System

Pickering emulsion offers a promising platform for conducting interfacial reactions between immiscible reagents; it is particularly suitable for hydrogen production by photoreforming of non-water soluble biomass liquid and water. Herein, Pt-promoted (001)-facet-dominated anatase TiO2 nanosheets were synthesized by a hydrothermal route associated with microfluidic technology for high activity and metal dispersion, and selective surface modification was carried out for preparing Janus particles. Photoreforming hydrogen production through n-octanol and water that formed O/W microemulsion with an average diameter of 540 µm was achieved to obtain amphiphilic catalyst. The as-prepared 2D Janus-type catalysts exhibited remarkably stable emulsification performance as well as photocatalytic activity. This finding indicates that triethoxyfluorosilane had negligible impact on the catalytic performance, yet provided a remarkable benefit to large specific surface area at microemulsion interface, thereby enhancing the H2 yield up to 2003 μmol/g. The cyclic experiments indicate that the decrease in cyclic performance was more likely to be caused by the coalescence of the microemulsion rather than the decrease in catalytic activity, and the microemulsion could be easily recovered by simply hand shaking to more than 96% of the initial performance.

Equilibrium distances for the capillary interaction between floating objects

When small objects are placed at a water-air interface, attractive and repulsive interactions appear due to liquid deformations. Although it is commonly admitted that two floating objects deforming the liquid interface in the same way are only attracting, we show that in the case of objects whose height does not vary during the interaction, the situation is much more complex than expected. In fact, attraction and repulsion can coexist at different ranges, so that equilibrium distances are observed. A 1D model based on the capillary interaction between vertical plates immersed in water is used to illustrate and calculate these situations, giving a picture of capillary interactions. We show that the wetting condition plays a determinant role in the behaviour of the interaction between floating objects. We also demonstrate that the equilibrium distance is given by the logarithm of the capillary charge ratio, using the right capillary charge definition. We also discuss the particular case of the existence of an interaction with a zero-capillary charge. A general equation of the equilibrium distance is proposed. An experimental confirmation of this relation is also given.

Adsorption trajectories of nonspherical particles at liquid interfaces

The adsorption of colloidal particles at liquid interfaces is of great importance scientifically and industrially, but the dynamics of the adsorption process is still poorly understood. In this paper we use a Langevin model to study the adsorption dynamics of ellipsoidal colloids at a liquid interface. Interfacial deformations are included by coupling our Langevin dynamics to a finite element model while transient contact line pinning due to nanoscale defects on the particle surface is encoded into our model by renormalizing particle friction coefficients and using dynamic contact angles relevant to the adsorption timescale. Our simple model reproduces the monotonic variation of particle orientation with time that is observed experimentally and is also able to quantitatively model the adsorption dynamics for some experimental ellipsoidal systems but not others. However, even for the latter case, our model accurately captures the adsorption trajectory (i.e., particle orientation versus height) of the particles. Our study clarifies the subtle interplay between capillary, viscous, and contact line forces in determining the wetting dynamics of micron-scale objects, allowing us to design more efficient assembly processes for complex particles at liquid interfaces.

Capillary force on an 'inert' colloid: a physical analogy to dielectrophoresis

"Inert" colloids are μm-scale particles that create no distortion when trapped at a planar fluid-fluid interface. When placed in a curved interface, however, such colloids can create interfacial distortions of quadrupolar symmetry - so-called "induced capillary quadrupoles." The present work explores the analogy between capillary quadrupoles and electric dipoles, and the forces exerted on them by a symmetry-breaking gradient. In doing so, we weigh in on an outstanding debate as to whether a curvature gradient can induce a capillary force on an inert colloid. We argue that this force exists, for the opposite would imply that all dielectrophoretic forces vanish in two dimensions (2D). We justify our claim by solving 2D Laplace problems of electrostatics and capillary statics involving a single particle placed within a large circular shell with an imposed gradient. We show that the static boundary condition on the outer shell must be considered when applying the principle of virtual work to compute the force on the particle, as verified by a direct calculation of this force through integration of the particle stresses. Our investigation highlights some of the subtleties that emerge in virtual work calculations of capillary statics and electrostatics, thereby clarifying and extending previous results in the field. The broader implication of our results is that inert particles - including particles with planar, pinned contact lines and equilibrium contact angles - interact through interparticle capillary forces that scale quadratically with the deviatoric curvature of the host interface, contrary to recent claims made in the literature.

Marangoni circulation in evaporating droplets in the presence of soluble surfactants

HYPOTHESIS

Soluble surfactants in evaporating sessile droplets can cause a circulatory Marangoni flow. However, it is not straightforward to predict for what cases this vortical flow arises. It is hypothesized that the occurrence of Marangoni circulation can be predicted from the values of a small number of dimensionless parameters.

SIMULATIONS

A numerical model for the drop evolution is developed using lubrication theory. Surfactant transport is implemented by means of convection-diffusion-adsorption equations. Results are compared to literature.

FINDINGS

It is shown that stronger evaporation, slower adsorption kinetics and lower solubility of the surfactants all tend to increasingly suppress Marangoni circulation. These results are found to be consistent with both experimental and numerical results from literature and can explain qualitative differences in flow behavior of surfactant-laden droplets. Furthermore, diffusion also tends to counteract Marangoni flow, where bulk diffusion has a more significant influence than surface diffusion. Also, the formation of micelles is found to slightly suppress Marangoni circulation. Experimental results from literature, however, show that in some cases circulatory behavior is enhanced by micelles, possibly even resulting in qualitative changes in the flow. Potential explanations for these differences are given and extensions to the model are suggested to improve its consistency with experiments.

Controllable Capillary Assembly of Magnetic Ellipsoidal Janus Particles into Tunable Rings, Chains and Hexagonal Lattices

Colloidal assembly at fluid interfaces has a great potential for the bottom-up fabrication of novel structured materials. However, challenges remain in realizing controllable and tunable assembly of particles into diverse structures. Herein, the capillary assembly of magnetic ellipsoidal Janus particles at a fluid-fluid interface is reported. Depending on their tilt angle, that is, the angle the particle main axis forms with the fluid interface, these particles deform the interface and generate capillary dipoles or hexapoles. Driven by capillary interactions, multiple particles thus assemble into chain-, hexagonal-lattice-, and ring-like structures, which can be actively controlled by applying an external magnetic field. A field-strength phase diagram is predicted in which various structures are present as stable states. Owing to the diversity, controllability, and tunability of assembled structures, magnetic ellipsoidal Janus particles at fluid interfaces could therefore serve as versatile building blocks for novel materials.

Pickering Emulsifiers Based on Block Copolymer Nanoparticles Prepared by Polymerization-Induced Self-Assembly

Block copolymer nanoparticles prepared via polymerization-induced self-assembly (PISA) represent an emerging class of organic Pickering emulsifiers. Such nanoparticles are readily prepared by chain-extending a soluble homopolymer precursor using a carefully selected second monomer that forms an insoluble block in the chosen solvent. As the second block grows, it undergoes phase separation that drives in situ self-assembly to form sterically stabilized nanoparticles. Conducting such PISA syntheses in aqueous solution leads to hydrophilic nanoparticles that enable the formation of oil-in-water emulsions. Alternatively, hydrophobic nanoparticles can be prepared in non-polar media (e.g., n-alkanes), which enables water-in-oil emulsions to be produced. In this review, the specific advantages of using PISA to prepare such bespoke Pickering emulsifiers are highlighted, which include fine control over particle size, copolymer morphology, and surface wettability. This has enabled various fundamental scientific questions regarding Pickering emulsions to be addressed. Moreover, block copolymer nanoparticles can be used to prepare Pickering emulsions over various length scales, with mean droplet diameters ranging from millimeters to less than 200 nm.

Synthesis and applications of anisotropic nanoparticles with precisely defined dimensions

Shape and size play powerful roles in determining the properties of a material; controlling these aspects with precision is therefore an important, fundamental goal of the chemical sciences. In particular, the introduction of shape anisotropy at the nanoscale has emerged as a potent way to access new properties and functionality, enabling the exploration of complex nanomaterials across a range of applications. Recent advances in DNA and protein nanotechnology, inorganic crystallization techniques, and precision polymer self-assembly are now enabling unprecedented control over the synthesis of anisotropic nanoparticles with a variety of shapes, encompassing one-dimensional rods, dumbbells and wires, two-dimensional and three-dimensional platelets, rings, polyhedra, stars, and more. This has, in turn, enabled much progress to be made in our understanding of how anisotropy and particle dimensions can be tuned to produce materials with unique and optimized properties. In this Review, we bring these recent developments together to critically appraise the different methods for the bottom-up synthesis of anisotropic nanoparticles enabling exquisite control over morphology and dimensions. We highlight the unique properties of these materials in arenas as diverse as electron transport and biological processing, illustrating how they can be leveraged to produce devices and materials with otherwise inaccessible functionality. By making size and shape our focus, we aim to identify potential synergies between different disciplines and produce a road map for future research in this crucial area.

Motion of micro- and nano- particles interacting with a fluid interface

In this article, we review both theoretical models and experimental results on the motion of micro- and nano- particles that are close to a fluid interface or move in between two fluids. Viscous drags together with dissipations due to fluctuations of the fluid interface and its physicochemical properties affect strongly the translational and rotational drags of colloidal particles, which are subjected to Brownian motion in thermal equilibrium. Even if many theoretical and experimental investigations have been carried out, additional scientific efforts in hydrodynamics, statistical physics, wetting and colloid science are still needed to explain unexpected experimental results and to measure particle motion in time and space scales, which are not accessible so far.

Vorticity-Aligned Droplet Bands in Sheared Immiscible Polymer Blends Induced by Solid Particles

The spatiotemporal organization of complex fluids under flow can be strongly affected by incorporating solid particles. Here, we report that a monolayer of interfacially active microspheres preferentially wetted by the matrix phase can bridge droplets into vorticity-aligned bands in immiscible polymer blends at intermediate particle concentrations and low shear rates. Strong particle bridging ability and the formation of rigid anisotropic droplet bands with a negligible inertia effect in the Newtonian matrix are suggested to be responsible for the vorticity orientation of droplet bands during slow shear flow, which could be understood based on Jeffery orbit theory in the framework of fluid mechanics and strong confinement effect acted by shear walls and adjacent bands. However, increasing the aspect ratio of particles could restrain the formation of anisotropic bands because of reduced particle coverage and promoted droplet coalescence induced by sharp particle corners, increased and uneven distribution of particle aggregates in the matrix phase, and weakened particle bridging ability.

Interactions between polystyrene particles with diameters of several tens to hundreds of micrometers at the oil-water interface

HYPOTHESIS

The charged spherical colloidal particles at the fluid-fluid interface experience considerably strong and long-ranged electrostatic and capillary interactions. The contribution of capillary force becomes more significant as the particle size increases beyond a certain limit. The relative strengths of the two competing interactions between the spherical polystyrene particles at the oil-water interface are quantified depending on their size.

EXPERIMENTS

The studied particles, obtained using the microfluidic method, have diameters of tens to hundreds of micrometers. The scaling behaviors of the commercially available colloidal particles with diameters of ~3 μm are also compared. An optical laser tweezer apparatus is used to directly or indirectly measure the interparticle force. Subsequently, the capillary force that can be attributed to the gravity-induced interface deformation and contact line undulation is calculated and compared with the measured interaction force.

FINDINGS

Regardless of the particle diameter (~3-330 μm), the measured force is observed to decay as r^-4, where r denotes the center-to-center separation, demonstrating that the dipolar electrostatic interaction is important and that the gravity-induced capillary interaction is negligible. Furthermore, numerical calculations with respect to the undulated meniscus confirm that the magnitude of capillary interaction is significantly smaller than that of the measured electrostatic interaction.

Interference Provides Clarity: Direct Observation of 2D Materials at Fluid-Fluid Interfaces

Monolayer particles of two-dimensional (2D) materials represent a scientifically and technologically interesting class of anisotropic particles with colloidal-scale lateral sizes but sub-nanometer thicknesses. This atomic-scale thickness leads to interesting phenomena that can be exploited in next-generation thin-film technologies, and fluid-fluid interfaces provide a potentially scalable platform to confine, assemble, and deposit functional thin films of 2D materials. However, directly observing how these materials interact and assemble into a given film morphology is experimentally challenging because of their sub-nanometer thicknesses. Here, we demonstrate the ability to directly observe graphene, molybdenum disulfide (MoS₂), and hexagonal boron nitride (h-BN) particles at fluid-fluid interfaces using interference reflection microscopy (IRM). Monolayer MoS₂ and graphene particles demonstrated >10% optical contrast at an air-water interface, which allowed us to quantitatively analyze in situ images of self-assembled MoS₂ particles and to map trajectories of interacting graphene particles. Additionally, the Brownian motion of a graphene particle was tracked and analyzed in the context of passive microrheology theory for 2D particle probes. Our results demonstrate how IRM can be used to obtain quantitative spatiotemporal information regarding the self-assembly and dynamics of 2D materials at fluid-fluid interfaces. It will have a significant impact on our ability to investigate systems of atomically thin particles at fluid-fluid interfaces, an area that has fundamental scientific importance and materials science applications but has suffered from a lack of direct, in situ observation techniques.

Molecularly Designed Interfacial Viscoelasticity by Dendronized Polymers: From Flexible Macromolecules to Colloidal Objects

The thermodynamic and rheological properties of densely packed dendronized polymers (DPs) at water-air interfaces were studied here for first- and fourth-generation DPs (PG1, PG4) with both small (P_n ≈ 50) and large (P_n ≈ 500) backbone degrees of polymerization. The excellent control over the structural characteristics of these polymers enabled us to investigate how the interfacial properties change as we go from thin, flexible macromolecules toward thicker molecular objects that display colloidal features. The effects of the dendron generation, affecting the persistence length, as well as the degree of polymerization and surface pressure on the formation of DP layers at the water-air interface were studied. Surface pressure measurements and interfacial rheology suggest the existence of significant attractive interactions between the molecules of the higher generation DPs. While all DPs featured reproducible Π-A diagrams, successive compression-expansion cycles and surface pressure relaxation experiments revealed differences in the stability of the formed films, which are consistent with the variations in shape persistence and interactions between the studied DPs. Atomic force microscopy after Langmuir-Blodgett transfer of the films displayed a nanostructuring that can be attributed to the increase in attractive forces with increasing polymer generation and anisotropy. The importance of such structures on the surface properties was probed by interfacial shear rheology, which validated the existence of strong albeit brittle structures for fourth-generation DPs. Ultimately, we demonstrate how in particular rod-like DPs can be used as robust foam stabilizers.

Building Reconfigurable Devices Using Complex Liquid-Fluid Interfaces

Liquid-fluid interfaces provide a platform both for structuring liquids into complex shapes and assembling dimensionally confined, functional nanomaterials. Historically, attention in this area has focused on simple emulsions and foams, in which surface-active materials such as surfactants or colloids stabilize structures against coalescence and alter the mechanical properties of the interface. In recent decades, however, a growing body of work has begun to demonstrate the full potential of the assembly of nanomaterials at liquid-fluid interfaces to generate functionally advanced, biomimetic systems. Here, a broad overview is given, from fundamentals to applications, of the use of liquid-fluid interfaces to generate complex, all-liquid devices with a myriad of potential applications.

Shape and Color Switchable Block Copolymer Particles by Temperature and pH Dual Responses

Herein, we report a simple and robust strategy for preparing dual-responsive shape-switchable block copolymer (BCP) particles, which respond to subtle temperature and pH changes near physiological conditions (i.e., human body temperature and neutral pH). The shape transition of polystyrene- b-poly(4-vinylpyridine) BCP particles between lens and football shapes occurs in very narrow temperature and pH ranges: no temperature-based transition for pH 6.0, 40-50 °C transition for pH 6.5, and 25-35 °C for pH 7.0. To achieve these shape transitions, temperature/pH-responsive polymer surfactants of poly( N-(2-(diethylamino)ethyl)acrylamide- r- N-isopropylacrylamide) are designed to induce dramatic changes in relative solubility and their location in response to temperature and pH changes near physiological conditions. In addition, the BCP particles exhibit reversible shape-transforming behavior according to orthogonal temperature and pH changes. Colorimetric measurements of temperature and pH changes are enabled by shape-transforming properties combined with selective positioning of dyes, suggesting promising potential for these particles in clinical and biomedical applications.

Mapping Anisotropic and Heterogeneous Colloidal Interactions via Optical Laser Tweezers

Heterogeneity among particles is an inherent feature that allows nondeterministic prediction of the properties of assembled structures and materials composed of many particles. Here, we report a promising strategy to quantify the heterogeneous and anisotropic interactions between ellipsoid particles using optical laser tweezers. The configuration and separation between two particles at an oil-water interface were optically controlled, and the capillary interaction behaviors were directly observed and measured. As a result, the optimal particle configurations at energetically favorable states were obtained, and the interaction forces between the particles were identified accurately by determining the trap stiffness in the direction of major and minor axes of the particle. Visualization of the capillary field around individual particles confirmed that the capillary interactions were quadrupolar, anisotropic, and heterogeneous. The measurement method presented here can be widely used to quantify interaction fields for various types of anisotropic particles.

Super-resolution microscopy on single particles at fluid interfaces reveals their wetting properties and interfacial deformations

Solid particles adsorbed at fluid interfaces are crucial for the mechanical stability of Pickering emulsions. The key parameter which determines the kinetic and thermodynamic properties of these colloids is the particle contact angle, θ. Several methods have recently been developed to measure the contact angle of individual particles adsorbed at liquid-liquid interfaces, as morphological and chemical heterogeneities at the particle surface can significantly affect θ. However, none of these techniques enables the simultaneous visualization of the nanoparticles and the reconstruction of the fluid interface to which they are adsorbed, in situ. To tackle this challenge, we utilize a newly developed super-resolution microscopy method, called iPAINT, which exploits non-covalent and continuous labelling of interfaces with photo-activatable fluorescent probes. Herewith, we resolve with nanometer accuracy both the position of individual nanoparticles at a water-octanol interface and the location of the interface itself. First, we determine single particle contact angles for both hydrophobic and hydrophilic spherical colloids. These experiments reveal a non-negligible dependence of θ on particle size, from which we infer an effective line tension, τ. Next, we image elliptical particles at a water-decane interface, showing that the corresponding interfacial deformations can be clearly captured by iPAINT microscopy.

Probing the Colloidal Particle Dynamics in Drying Sessile Droplets

Particle deposition and assembly in the vicinity of contact lines of evaporative sessile droplets have been intensively investigated during the past decade. Yet little is known about particle arrangement in the contact-line region initiated by the self-assembled particles at the air-liquid interface and how the particle pinning behaves differently compared with that when particles are transported from the bulk of the sessile droplet to the three-phase contact line. We utilized the dual-droplet inkjet printing process to elucidate the versatility in particle deposition and assembly generated near the contact-line region and demonstrated the influence of such printing technique on particle pinning at the contact line after solvent evaporation. Wetting droplets containing sulfate-functionalized polystyrene (sulfate-PS) nanoparticles were jetted over the supporting droplets with carboxyl-PS nanoparticles, where the interplay between the solvent evaporation and particle transport dictates the final morphology of particle deposition. Depending on the particle size and concentration used in the supporting droplet, different morphologies of particle depositions near the periphery of the supporting droplet have been obtained such as stratified rings, blended rings, and rings of particles mainly from the air-liquid interface. Three characteristic times are considered in this study, namely, total time for solvent evaporation ( t_evp), time required for the colloidal particles in the supporting droplet to reach the contact line and form the first layers of deposition ( t_ps), and time needed for the particles at the interface to reach the contact line ( t_pw). The ratios of characteristic times ( t_ps/ t_evp) and ( t_ps/ t_pw) determine the final particle assembly near the contact-line region. The ability to control such particle deposition and assembly could have a direct implication on developing facile, cost-effective technologies essential for patterning heterogeneous structured coatings and devices.

Shape-Anisotropic Colloids at Interfaces

Research in the 1980s demonstrated the formation of monolayers of particles achieved by interfacial particle trapping as a model system for investigating colloids in two dimensions. Since then, microscopy visualization of two-dimensional particle monolayers and quantification of the microstructure have led to significant fundamental understanding of a number of phenomena such as crystallization, freezing and melting transitions, dislocation dynamics, aggregation kinetics, and others. On the application front, particles at curved interfaces, as often the case in particle-stabilized emulsions and foams, have received considerable attention in the last few decades. The growing interest in the search for novel particles and new strategies to effect emulsion stabilization stems from their application in several disciplines. Moreover, particle-stabilized Pickering emulsions and foams can also be used to derive a number of advanced functional materials. Compared to several accounts of research on spherical colloids at fluid-fluid interfaces, investigations of the behavior of shape-anisotropic particles at interfaces, albeit receiving considerable attention in recent years, are still in a nascent stage. The objective of this feature article is to highlight our recent work in this area. In particular, the adsorption of shape-anisotropic particles to interfaces, wetting behavior, interfacial self-assembly, the response of nonspherical-particle-coated interfaces to compression and shear, and their ability to stabilize emulsions are discussed.

Capillary Interaction and Self-Assembly of Tilted Magnetic Ellipsoidal Particles at Liquid Interfaces

Magnetic ellipsoidal particles adsorbed at a liquid interface provide exciting opportunities for creating switchable functional materials, where self-assembly can be switched on and off using an external field [Davies et al., Adv. Mater., 2014, 26, 6715]. In order to gain a deeper understanding of this novel system in the presence of an external field, we study the capillary interaction and self-assembly of tilted ellipsoids using analytical theory and finite element simulations. We derive an analytical expression for the dipolar capillary interaction between tilted ellipsoids in elliptical polar coordinates, which exhibits a 1/r ² power law dependence in the far field (i.e., large particle separations r) and correctly captures the orientational dependence of the capillary interactions in the near field. Using this dipole potential and finite element simulations, we further analyze the energy landscape of particle clusters consisting of up to eight tilted ellipsoids in contact. For clusters of two particles, we find that the side-to-side configuration is stable, whereas the tip-to-tip configuration is unstable. However, for clusters of more than three particles, we find that circular loops of side-to-side particles become globally stable, whereas linear chains of side-to-side particles become metastable. Furthermore, the energy barrier for the linear-to-loop transition decreases with increasing particle number. Our results explain both thermodynamically and kinetically why tilted ellipsoids assemble side-to-side locally but have a strong tendency to form loops on larger length scales.

Detection and tracking of anisotropic core-shell colloids

Optical microscopy techniques with three dimensional (3D) resolution are powerful tools for the real-space imaging of the structure and dynamics of colloidal systems. While real-space imaging of spherical particles is well established, the observation of shape anisotropic particles has only recently met a lot of interest. Apart from translation, shape anisotropic particles also possess additional rotational degrees of freedom. In this manuscript, we introduce a novel technique to find the position and the orientation of anisotropic particles in 3D. It is based on an algorithm which is applicable to core-shell particles consisting of a spherical core and a shell with arbitrary shape. We demonstrate the performance of this algorithm using PMMA/PMMA (polymethyl methacrylate) core-shell ellipsoids. The algorithm is tested on artificial images and on experimental data. The correct identification of particle positions with subpixel accuracy and of their orientations with high angular precision in dilute and dense systems is shown. In addition, we developed an advanced particle tracking algorithm that takes both translational and rotational movements of the anisotropic particles into account. We show that our 3D detection and tracking technique is suitable for the accurate and reliable detection of large and dense colloidal systems containing several thousands of particles.

Physico-chemical foundations of particle-laden fluid interfaces

Particle-laden interfaces are ubiquitous nowadays. The understanding of their properties and structure is essential for solving different problems of technological and industrial relevance; e.g. stabilization of foams, emulsions and thin films. These rely on the response of the interface to mechanical perturbations. The complex mechanical response appearing in particle-laden interfaces requires deepening on the understanding of physico-chemical mechanisms underlying the assembly of particles at interface which plays a central role in the distribution of particles at the interface, and in the complex interfacial dynamics appearing in these systems. Therefore, the study of particle-laden interfaces deserves attention to provide a comprehensive explanation on the complex relaxation mechanisms involved in the stabilization of fluid interfaces.

Solvent-Induced Shape Recovery of Anisotropic Polymer Particles Prepared by a Modified Thermal Stretching Method

Anisotropic polymer particles have attracted great attention because of their unique properties and potential applications in various areas, such as microelectronics, drug delivery, and medical imaging. The fabrication and morphology control, especially the shape recovery, of anisotropic polymer particles, however, remains a challenging task. In this work, we develop a novel strategy to fabricate anisotropic polymer particles by thermally stretching poly(vinyl alcohol) (PVA) films embedding polystyrene (PS) microspheres using a weight. Depending on the preannealing condition, anisotropic PS particles with two different shapes, sharp-headed and blunt-headed PS particles, can be obtained. The PVA films can be selectively removed by isopropanol/water, releasing the anisotropic PS particles. By adding tetrahydrofuran (THF), a good solvent for PS, into the PS particle-containing solutions, the anisotropic particles gradually transform back to spheres to reduce the total interfacial energies. The shape recovery rates of the polymer particles can be controlled by the amount of the added THF. This work not only provides a simple and feasible route to fabricate anisotropic polymer particles but also contributes to a deeper understanding in the solvent-induced shape recovery process from anisotropic polymer particles to polymer spheres.

Critical Impact of Solvent Evaporation on the Resolution of Inkjet Printed Nanoparticles Film

We first verify the critical role of solvent evaporation on the resolution of inkjet printing. To confirm our hypothesis, we adjusted the evaporation rate gradient along the surface of adjacent droplets by controlling the drying microenvironment. Uneven solvent evaporation flux caused thermocapillary surface flow inward the space of micrometer-sized droplets and increase the air pressure, which prevented the neighboring droplets from coalescence. When reducing the droplet distance by the solvent evaporation-based method, a uniform profile could be obtained at the same time. This work brings us a step closer to resolving one of the critical bottlenecks to commercializing printed electronic goods.

Magnetocapillary self-assemblies: Locomotion and micromanipulation along a liquid interface

This paper presents an overview and discussion of magnetocapillary self-assemblies. New results are presented, in particular concerning the possible development of future applications. These self-organizing structures possess the notable ability to move along an interface when powered by an oscillatory, uniform magnetic field. The system is constructed as follows. Soft magnetic particles are placed on a liquid interface, and submitted to a magnetic induction field. An attractive force due to the curvature of the interface around the particles competes with an interaction between magnetic dipoles. Ordered structures can spontaneously emerge from these conditions. Furthermore, time-dependent magnetic fields can produce a wide range of dynamic behaviours, including non-time-reversible deformation sequences that produce translational motion at low Reynolds number. In other words, due to a spontaneous breaking of time-reversal symmetry, the assembly can turn into a surface microswimmer. Trajectories have been shown to be precisely controllable. As a consequence, this system offers a way to produce microrobots able to perform different tasks. This is illustrated in this paper by the capture, transport and release of a floating cargo, and the controlled mixing of fluids at low Reynolds number.

Mechanisms of pattern formation from dried sessile drops

The formation of patterns after the evaporation of colloidal droplets deposited on a solid surface is an everyday natural phenomenon. During the past two decades, this topic has gained broader audience due to its numerous applications in biomedicine, nanotechnology, printing, coating, etc. This paper presents a detailed review of the experimental studies related to the formation of various deposition patterns from dried droplets of complex fluids (i.e., nanofluids, polymers). First, this review presents the fundamentals of sessile droplet evaporation including evaporation modes and internal flow fields. Then, the most observed dried patterns are presented and the mechanisms behind them are discussed. The review ends with the categorisation and exhaustive investigation of a wide range of factors affecting pattern formation.

Wetting, meniscus structure, and capillary interactions of microspheres bound to a cylindrical liquid interface

Wetting, meniscus structure, and capillary interactions for polystyrene microspheres deposited on constant curvature cylindrical liquid interfaces, constructed from nonvolatile ionic or oligomeric liquids, were studied by optical interferometry and optical microscopy. The liquid interface curvature resulted from the preferential wetting of finite width lines patterned onto planar silicon substrates. Key variables included sphere diameter, nominal (or average) contact angle, and deviatoric interfacial curvature. Menisci adopted the quadrupolar symmetry anticipated by theory, with interfacial deformation closely following predicted dependences on sphere diameter and nominal contact angle. Unexpectedly, the contact angle was not constant locally around the contact line, the nominal contact angle varied among seemingly identical spheres, and the maximum interface deviation did not follow the predicted dependence on deviatoric interfacial curvature. Instead, this deviation was up to an order-of-magnitude larger than predicted. Trajectories of neighboring microspheres visually manifested quadrupole-quadrupole interactions, eventually producing square sphere packings that foreshadow interfacial assembly as a potential route to hierarchical 2D particle structures.

Heterogeneous Capillary Interactions of Interface-Trapped Ellipsoid Particles Using the Trap-Release Method

Heterogeneous capillary interactions between ellipsoid particles at the oil-water interface were measured via optical laser tweezers. Two trapped particles were aligned in either tip-to-tip (tt) or side-to-side (ss) configurations via the double-trap method and were released from the optical traps, leading to particle-particle attractions due to the capillary forces caused by quadrupolar interface deformation. On the basis of image analysis and calculations of the Stokes drag force, the capillary interactions between two ellipsoid particles with the same aspect ratio (E) were found to vary with the particle pairs that were measured, indicating that the interactions were nondeterministic or heterogeneous. Heterogeneous capillary interactions could be attributed to undulation of the interface meniscus due to chemical and/or geometric particle heterogeneity. The power law exponent for the capillary interaction U_cap ≈ r^-β was found to be β ≈ 4 and was independent of the aspect ratio and particle configuration in long-range separations. Additionally, with regard to the tt configuration, the magnitude of the capillary force proportionally increased with the E value (E > 1) when two ellipsoid particles approached each other in the tt configuration.

Self-assembly of smart mesoscopic objects

Self-assembly due to capillary forces is a common method for generating 2D mesoscale structures made of identical particles floating at some liquid-air interface. We show herein how to create soft entities that deform or not the liquid interface as a function of the strength of some applied magnetic field. These smart floating objects self-assemble or not depending on the application of an external field. Moreover, we show that the self-assembling process can be reversed opening ways to rearrange structures.

Deformation of the contact line around spherical particles bound at anisotropic fluid interfaces

When a particle adsorbs at a liquid interface, the 3-phase contact line geometry depends on the shape of the particle and of the liquid interface. The shape of the contact line is the key to controlling capillary forces among particles, and is therefore a useful means to direct assembly of interfacial particles. We measured the shape of the contact line around millimeter-sized PDMS-coated glass spheres at water/air interfaces with anisotropic shapes. We studied the advancing and receding conditions separately. We focused on interfaces with a cylindrical shape, where the predominant deformation of the meniscus and the contact line both have quadrupolar cos(2ϕ) symmetry. We related the measured magnitude of the quadrupolar deformation to the applied vertical force on the sphere and the interface's deviatoric curvature, D₀. For modest curvature (D₀ < 0.1 × sphere radius), our results agree with the theoretical prediction for free particles. At higher curvature, the measurements exceed the theory. The theory appears to apply even when there is contact-angle hysteresis, as long as the measured contact angle is used rather than the equilibrium (Young-Dupré) angle. The magnitude of the quadrupolar deformation depends on the applied force. Together, these results show the range of validity of the theory.

Controlling the Orientation of Droplets in Ellipsoid-Filled Polymeric Emulsions with Particle Parameters and Flow Conditions

The effect of particle parameters [aspect ratio (AR) and concentration] and flow conditions (gap spacing and shear rate) on droplet orientation deformation behavior in polystyrene (PS) particle-filled binary polymeric emulsions is investigated by using a rheo-optical technique and confocal microscopy. Interesting vorticity orientation behavior is achieved by tailoring experimental conditions to yield rigid anisotropic droplets during slow confined shear flow. PS ellipsoids with a high AR are found to reside both at the fluid interface in a monolayer side-on state and inside droplets, leading to the formation of rigid anisotropic droplets because of the interfacial/bulk jamming effect at appropriate particle concentrations. In unconfined bulk samples, droplets with a vorticity orientation can also be observed under the wall migration effect and confinement effect arising from nearby droplets. However, the overly strong wall confinement effect remarkably facilitates the coalescence of vorticity-aligned droplets during slow shear, eventually leading to the formation of a long stringlike phase aligning along the flow direction. High shear rates generate refined droplets with lower particle coverage and weak rigidity, which restrain the formation of anisotropic droplets and thus suppress the droplet vorticity orientation.

Nano- and microparticles at fluid and biological interfaces

Systems with interfaces are abundant in both technological applications and biology. While a fluid interface separates two fluids, membranes separate the inside of vesicles from the outside, the interior of biological cells from the environment, and compartmentalize cells into organelles. The physical properties of interfaces are characterized by interface tension, those of membranes are characterized by bending and stretching elasticity. Amphiphilic molecules like surfactants that are added to a system with two immiscible fluids decrease the interface tension and induce a bending rigidity. Lipid bilayer membranes of vesicles can be stretched or compressed by osmotic pressure; in biological cells, also the presence of a cytoskeleton can induce membrane tension. If the thickness of the interface or the membrane is small compared with its lateral extension, both can be described using two-dimensional mathematical surfaces embedded in three-dimensional space. We review recent work on the interaction of particles with interfaces and membranes. This can be micrometer-sized particles at interfaces that stabilise emulsions or form colloidosomes, as well as typically nanometer-sized particles at membranes, such as viruses, parasites, and engineered drug delivery systems. In both cases, we first discuss the interaction of single particles with interfaces and membranes, e.g. particles in external fields, non-spherical particles, and particles at curved interfaces, followed by interface-mediated interaction between two particles, many-particle interactions, interface and membrane curvature-induced phenomena, and applications.

Dynamical theory of the inverted cheerios effect

Recent experiments have shown that liquid drops on highly deformable substrates exhibit mutual interactions. This is similar to the Cheerios effect, the capillary interaction of solid particles at a liquid interface, but now the roles of solid and liquid are reversed. Here we present a dynamical theory for this inverted Cheerios effect, taking into account elasticity, capillarity and the viscoelastic rheology of the substrate. We compute the velocity at which droplets attract, or repel, as a function of their separation. The theory is compared to a simplified model in which the viscoelastic dissipation is treated as a localized force at the contact line. It is found that the two models differ only at small separation between the droplets, and both of them accurately describe experimental observations.

Stimuli-Responsive, Shape-Transforming Nanostructured Particles

Development of particles that change shape in response to external stimuli has been a long-thought goal for producing bioinspired, smart materials. Herein, the temperature-driven transformation of the shape and morphology of polymer particles composed of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) block copolymers (BCPs) and temperature-responsive poly(N-isopropylacrylamide) (PNIPAM) surfactants is reported. PNIPAM acts as a temperature-responsive surfactant with two important roles. First, PNIPAM stabilizes oil-in-water droplets as a P4VP-selective surfactant, creating a nearly neutral interface between the PS and P4VP domains together with cetyltrimethylammonium bromide, a PS-selective surfactant, to form anisotropic PS-b-P4VP particles (i.e., convex lenses and ellipsoids). More importantly, the temperature-directed positioning of PNIPAM depending on its solubility determines the overall particle shape. Ellipsoidal particles are produced above the critical temperature, whereas convex lens-shaped particles are obtained below the critical temperature. Interestingly, given that the temperature at which particle shape change occurs depends solely on the lower critical solution temperature (LCST) of the polymer surfactants, facile tuning of the transition temperature is realized by employing other PNIPAM derivatives with different LCSTs. Furthermore, reversible transformations between different shapes of PS-b-P4VP particles are successfully demonstrated using a solvent-adsorption annealing with chloroform, suggesting great promise of these particles for sensing, smart coating, and drug delivery applications.

Trace Analysis and Chemical Identification on Cellulose Nanofibers-Textured SERS Substrates Using the "Coffee Ring" Effect

Surface-enhanced Raman scattering (SERS) has the theoretical possibility of detecting chemicals at the single molecular level. This potential is frequently limited, however, by the critical requirements of the surface morphology and mechanical stability of SERS substrates. In this paper, we report a new method for fabricating a SERS substrate with a significantly improved mechanical stability and analytical sensitivity, using cellulose nanofibers (CNFs) and gold nanoparticles (AuNPs). We constructed a uniformly CNFs-textured substrate on a glass surface by means of suppressing the "coffee ring" effect of the CNF sessile drop and then introduced an AuNP suspension onto the CNFs-textured substrate by taking advantage of the "coffee ring" effect. A widened detection zone is formed by AuNPs on the CNFs-textured glass, producing a stable SERS substrate for trace analysis and chemical identification. Microscopic and spectroscopic characterizations of the CNF-AuNPs SERS substrate show that the CNFs enhance the stability of both the AuNP clusters and the SERS activity. The CNF-AuNPs SERS substrate is significantly more stable and sensitive than the SERS substrate fabricated by directly depositing the AuNP suspension on a smooth glass surface.

Structures in the meniscus of smectic membranes: the role of dislocations?

We report an experimental investigation of the structure of periodic patterns observed in the meniscus of free-standing smectic films. Combination of polarizing optical microscopy and phase shifting interferometry enabled us to obtain new information on the structure of the meniscus, and in particular, on the topography of the smectic-air interface. We investigate the profile of the undulations in the striped structure in the thin part of the meniscus, change of the stripe period with the meniscus thickness and subsequent transition into a two-dimensional structure. It is shown that the two-dimensional structure has an unusual complex profile of "egg-box" type. The striped texture occurs upon cooling from the nontilted smectic-A to the smectic-C* phase, whereas the two-dimensional pattern is present in both phases. We discuss the possible origin of the modulated structures, the role of the dislocations in the meniscus, the elasticity of smectic layers, and the mechanical stress induced by dislocations.