Microfluidic channel sensory system for electro-addressing cell location, determining confluency, and quantifying a general number of cells

Microfluidics is a highly useful platform for culturing, monitoring, and testing biological cells. The integration of electrodes into microfluidic channels extends the functionality, sensing, and testing capabilities of microfluidic systems. By employing an electrochemical impedance spectroscopy (EIS) technique, the non-invasive, label-free detection of the activities of cells in real-time can be achieved. To address the movement toward spatially resolving cells in cell culture, we developed a sensory system capable of electro-addressing cell location within a microfluidic channel. This simple system allows for real-time cell location, integrity monitoring (of barrier producing cells), and confluency sensing without the need for frequent optical evaluation—saving time. EIS results demonstrate that cells within microfluidic channels can be located between various pairs of electrodes at different positions along the length of the device. Impedance spectra clearly differentiates between empty, sparse, and confluent microfluidic channels. The system also senses the level of cell confluence between electrode pairs—allowing for the relative quantification of cells in different areas of the microfluidic channel. The system’s electrode layout can easily be incorporated into other devices. Namely, organ-on-a-chip devices, that require the monitoring of precise cell location and confluency levels for understanding tissue function, modeling diseases, and for testing therapeutics.

Bioimpedance Spectroscopy: Basics and Applications

In this review, we aim to introduce the reader to the technique of electrical impedance spectroscopy (EIS) with a focus on its biological, biomaterials, and medical applications. We explain the theoretical and experimental aspects of the EIS with the details essential for biological studies, i.e., interaction of metal electrodes with biological matter and liquids, strategies of measurement rate increasing, noise reduction in bio-EIS experiments, etc. We also give various examples of successful bio-EIS practical implementations in science and technology, from whole-body health monitoring and sensors for vision prosthetic care to single living cell examination platforms, virus disease research, biomolecules detection, and implementation of novel biomaterials. The present review can be used as a bio-EIS tutorial for students as well as a handbook for scientists and engineers because of the extensive references covering the contemporary research papers in the field.

Extending In-Plane Impedance Measurements from 2D to 3D Cultures: Design Considerations

Three-dimensional (3D) cell cultures have recently emerged as tools for biologically modelling the human body. As 3D models make their way into laboratories there is a need to develop characterisation techniques that are sensitive enough to monitor the cells in real time and without the need for chemical labels. Impedance spectroscopy has been shown to address both of these challenges, but there has been little research into the full impedance spectrum and how the different components of the system affect the impedance signal. Here we investigate the impedance of human fibroblast cells in 2D and 3D collagen gel cultures across a broad range of frequencies (10 Hz to 5 MHz) using a commercial well with in-plane electrodes. At low frequencies in both 2D and 3D models it was observed that protein adsorption influences the magnitude of the impedance for the cell-free samples. This effect was eliminated once cells were introduced to the systems. Cell proliferation could be monitored in 2D at intermediate frequencies (30 kHz). However, the in-plane electrodes were unable to detect any changes in the impedance at any frequency when the cells were cultured in the 3D collagen gel. The results suggest that in designing impedance measurement devices, both the nature and distribution of the cells within the 3D culture as well as the architecture of the electrodes are key variables.

In-air EIS sensor for in situ and real-time monitoring of in vitro epithelial cells under air-exposure

This paper reports in-air monitoring of in vitro monolayer cells under air-exposure utilizing electrochemical impedance spectroscopy (EIS). In-air impedance measurement was performed by placing integrated electrodes laterally, instead of vertically, to a cell membrane, avoiding electrical disconnection, unlike conventional transepithelial-electrical-resistance (TEER). The in-air EIS sensor platform mainly consisted of two chambers, separated by a porous membrane where cells were cultured, that enabled cell exposure to both air (apical side) and liquid (basal side) for long-term measurement. On top of the membrane, EIS interdigitated electrodes were patterned and lung epithelial cells (A549 type II) were cultured with air exposure on one side. The fabricated in-air EIS sensor successfully demonstrated in situ real-time measurement of cell populations in confluency in the range of 7.8 × 104 and 9.6 × 105 cells per cm2 at a sensitivity of 3.0 × 10-2 Ω per cell in impedance and in the range of 1.0 × 104 and 9.6 × 105 cells per cm2 at a sensitivity of 0.17 × 10-15 F per cell in capacitance under AC frequencies of 100 kHz and 1 MHz, respectively. It also successfully monitored transient modulation of tight-junctions that collectively began to open in 30 minutes after the injection of 100 ng ml-1 TNF-α (a relaxation agent), reached maximum relaxation with a 12.6% increase in impedance value and a 12% decrease in capacitance in 60 minutes, and recovered back to its original junction status after 720 minutes, which confirmed the observation in animal models in the literature. Note that the opposite trends in impedance and capacitance allowed the in-air EIS sensor to distinguish cell population changes from tight junction modulation. It was concluded that the developed in-air EIS sensor in an in vitro platform can enable in situ and real-time monitoring of the population of the 'air-exposed' cells as well as the modulation of tight-junctions, which has not been demonstrated yet.

The benefits of carbon black, gold and magnetic nanomaterials for point-of-harvest electrochemical quantification of domoic acid

Gold nanostars (GNST), gold nanospheres (GNP) and carbon black (CB) are chosen as alternative nanomaterials to modify carbon screen-printed electrodes (c-SPEs). The resulting three kinds of modified c-SPEs (GNP-SPE, CB-SPE and GNSP-SPE) were electrochemically and microscopically characterized and compared with standardized c-SPEs after pretreatment with phosphate buffer by pre-anodization (pre-SPE). The results show outstanding electrochemical performance of the carbon black-modified SPEs which show low transient current, low capacitance and good porosity. A competitive chronoamperometric immunoassay for the shellfish toxin domoic acid (DA) is described. The performances of the CB-SPE, GNP-SPE and pre-SPE were compared. Hapten-functionalized magnetic beads were used to avoid individual c-SPE functionalization with antibody while enhancing the signal by creating optimum surface proximity for electron transfer reactions. This comparison shows that the CB-SPE biosensor operated best at a potential near - 50 mV (vs. Ag/AgCl) and enables DA to be determined with a detection limit that is tenfold lower compared to pre-SPE (4 vs. 0.4 ng mL-1). These results show very good agreement with HPLC data when analysing contaminated scallops, and the LOD is 0.7 mg DA kg-1 of shellfish. Graphical abstractSchematic representation of the magnetic bead-based immunoassay for the quantification of domoic acid (DA) in shellfish with nanomaterial-modified screen-printed electrodes. CB, carbon black; GNP, gold nanospheres; GNST, gold nanostars; MB, magnetic beads; DA-mAb, anti-DA monoclonal mouse antibody; HRP-pAb, horseradish conjugated polyclonal goat anti-mouse antibody; DA-BSA, bovine serum albumin conjugated DA; HQ, hydroquinone; BQ, benzoquinone.

Endothelial Permeability Assays In Vitro

The endothelium is a thin layer of squamous cells that acts as a semipermeable barrier regulating vascular permeability to let molecules pass through it thereby maintaining tissue fluid homeostasis. Physiological increase in endothelial or vascular permeability is transient, transpired by post-tissue injury during the initial phases of healing, whereas pathological permeability is persistent commonly witnessed in conditions such as atherosclerosis, chronic inflammation, tumor growth, and diabetic retinopathy. The in vivo or in situ use of animal models in the assessment of permeability not only raises inevitable ethical concerns but also confers difficulty to apply to high-throughput screening. Therefore, there is an ever-increasing dependency on in vitro studies to assess drug permeability, and various research programs have suffered to develop appropriate in vitro assays for measurement and prediction. In vitro models that both mimic in vivo microvascular endothelium and can be utilized to record changes in endothelial permeability are vital in delineating the mechanisms involved in the prevention and treatment of disorders related to vascular permeability. The Transwell^® and the electric cell-substrate impedance sensing (ECIS) assays are extensively used to assess the trans-endothelial permeability of solutes such as albumin, dextrans, and sucrose across endothelial monolayers and based on electrical resistance, etc. These models have several advantages such as the ease to perform and avoid the complexities of using a live animal.

Bioimpedance Analysis of Epithelial Monolayers after Exposure to Nanosecond Pulsed Electric Fields

Exposures to pulsed electric fields (PEFs) are known to affect cell membranes and consequently also cell-cell interactions as well as associated characteristics. Bioimpedance analysis offers direct and non-invasive insights into structural and functional changes of cell membranes and extracellular matrices through a rigorous evaluation of electrical parameters. Accordingly, the multi-frequency impedance of confluent monolayers of rat liver epithelial WB-F344 cells was monitored in situ before and after exposure to nanosecond PEFs (nsPEFs). The results were fitted by two Cole models in series to obtain the Cole parameters for the monolayer. For an interpretation of the results, dielectric parameters, were correlated with changes of the TJ protein zonula occludens (ZO-1) and the paracellular permeability of the monolayer Cole parameters in general change as a function of pulse number and time. The findings demonstrate that impedance analysis is an effective method to monitor changes of TJs cell-cell contacts and paracellular permeability and relate them to exposure parameters.

An orbital shear platform for real-time, in vitro endothelium characterization

Electrical impedance techniques have been used to characterize endothelium morphology, permeability, and motility in vitro. However, these impedance platforms have been limited to either static endothelium studies and/or induced laminar fluid flow at a constant, single shear stress value. In this work, we present a microfabricated impedance sensor for real-time, in vitro characterization of human umbilical vein endothelial cells (HUVECs) undergoing oscillatory hydrodynamic shear. Oscillatory shear was applied with an orbital shaker and the electrical impedance was measured by a microfabricated impedance chip with discrete electrodes positioned at radial locations of 0, 2.5, 5.0, 7.5, 10.0, and 12.5 mm from the center of the chip. Depending on their radial position within the circular orbital platform, HUVECs were exposed to shear values ranging between 0.6 and 6.71 dyne/cm(2) (according to numerical simulations) for 22 h. Impedance spectra were fit to an equivalent circuit model and the trans-endothelial resistance and monolayer's capacitance were extracted. Results demonstrated that, compared to measurements acquired before the onset of shear, cells at the center of the platform that experienced low steady shear stress (∼2.2 dyne/cm(2) ) had an average change in trans-endothelial resistance of 6.99 ± 4.06% and 1.78 ± 2.40% change in cell capacitance after 22 hours of shear exposure; cells near the periphery of the well (r = 12.5 mm) experienced transient shears (2.5-6.7 dyne/cm(2) ) and exhibited a greater change in trans-endothelial resistance (24.2 ± 10.8%) and cell capacitance (4.57 ± 5.39%). This study, demonstrates that the orbital shear platform provides a simple system that can capture and quantify the real-time cellular morphology as a result of induced shear stress. The orbital shear platform presented in this work, compared to traditional laminar platforms, subjects cells to more physiologically relevant oscillatory shear as well as exposes the sample to several shear values simultaneously. Biotechnol. Bioeng. 2016;113: 1336-1344. © 2015 Wiley Periodicals, Inc.

Evaluation of single cell electrical parameters from bioimpedance of a cell suspension

The present study introduces a simple and detailed analysis technique to extract the electrical properties of a single cell from impedance spectroscopy data from a group of cells in suspension, leading to a more reliable and cost effective diagnosis process for disease detection.

Dielectric spectroscopy as a viable biosensing tool for cell and tissue characterization and analysis

The use of dielectric spectroscopy to carry out real time observations of cells and to extract a wealth of information about their physiological properties has expanded in recent years. This popularity is due to the simple, easy to use, non-invasive and real time nature of dielectric spectroscopy. The ease of integrating dielectric spectroscopy with microfluidic devices has allowed the technology to further expand into biomedical research. Dielectric spectra are obtained by applying an electrical signal to cells, which is swept over a frequency range. This review covers the different methods of interpreting dielectric spectra and progress made in applications of impedance spectroscopy for cell observations. First, methods of obtaining specific electrical properties of cells (cell membrane capacitance and cytoplasm conductivity) are discussed. These electrical properties are obtained by fitting the dielectric spectra to different models and equations. Integrating models to reduce the effects of the electrical double layer are subsequently covered. Impedance platforms are then discussed including electrical cell substrate impedance sensing (ECIS). Categories of ECIS systems are divided into microelectrode arrays, interdigitated electrodes and those that allow differential ECIS measurements. Platforms that allow single cell and sub-single cell measurements are then discussed. Finally, applications of impedance spectroscopy in a range of cell observations are elaborated. These applications include observing cell differentiation, mitosis and the cell cycle and cytotoxicity/cell death. Future applications such as drug screening and in point of care applications are then covered.

Bioimpedance rise in response to histone deacetylase inhibitor is a marker of mammary cancer cells within a mixed culture of normal breast cells

Detection of a few cancer cells within a complex cellular mixture is a key challenge presented by clinical human biopsy samples. We have designed and tested a microfabricated bioimpedance device that can detect a few human MDA-MB-231 breast cancer cells in a mixed cell culture model of a breast tissue sample. The normal tissue components were modelled using non-cancerous MCF10A human breast epithelial cells and normal human HS68 fibroblasts. The sensor is a silicon chip 0.5 cm in diameter that contains one counter electrode and four 40 μm-wide multi-branched sensing electrodes. The cells' bioimpedances were characterized in pure monocultures and in mixed cell cultures following a brief cultivation on the sensor. After cell seeding, a stable bioimpedance signal was achieved indicative of cell attachment. A cancer-selective bioimpedance signal was elicited by addition of suberoylanilide hydroxamic acid (SAHA), a histone deacetylase inhibitor with selective actions on the cytoskeleton in breast cancer cells. SAHA elicited a 50% rise in peak bioimpedance in MDA-MB-231 breast cancer cells by 15 h. In mixed cultures of MDA-MB-231, MCF10A, and HS68 cells, the contribution of cancer cells present in the mixture dominated impedance response to SAHA. A single adherent cancer cell on any one of four electrodes in a background of ∼100 normal cells resulted in ≥5% increase in bioimpedance. The estimated sensitivity of this device is therefore one cancer cell among a background of 400 normal cells or the equivalent of 25 cancer cells in a biopsy sample of 10 000 cells.

Breast tumor cell detection at single cell resolution using an electrochemical impedance technique

Gold micro-electrodes with various diameters (25, 50, 75, 100 and 250 μm) were manufactured using standard micro-fabrication techniques and optimized for counting of MCF-7 cells (breast tumor cells) with single cell resolution. For specific cell capture, anti-EpCAM was immobilized on 11-mercaptoundecanoic acid (11-MUA)-3-mercaptopropionic acid (3-MPA) mixed self-assembled monolayer (SAM) modified gold surface of micro-electrodes. Electrodes were characterized using optical, cyclic voltammetry and electrochemical impedance spectroscopic (EIS) techniques. Cell capture response recorded using EIS suggested that optimum electrode dimensions should be analogous to desired cell size. For MCF-7 cells with an average diameter of 18 ± 2 μm, an electrode with 25 μm diameter was established as the optimum electrode size for precise single cell recognition and enumeration. In EIS investigation, the 25 μm electrode exhibited an impedance change of ~2.2 × 10(7) Ω in response to a single tumor cell captured on its surface. On the other hand other electrodes (250, 100, 75 and 50 μm) showed much less response for a single tumor cell. In future, the use of high density arrays of such electrodes with surface modifications will result in miniaturized lab on a chip devices for precise counting of MCF-7 cells with single cell resolution.

A vertically aligned carbon nanotube-based impedance sensing biosensor for rapid and high sensitive detection of cancer cells

A novel vertically aligned carbon nanotube based electrical cell impedance sensing biosensor (CNT-ECIS) was demonstrated for the first time as a more rapid, sensitive and specific device for the detection of cancer cells. This biosensor is based on the fast entrapment of cancer cells on vertically aligned carbon nanotube arrays and leads to mechanical and electrical interactions between CNT tips and entrapped cell membranes, changing the impedance of the biosensor. CNT-ECIS was fabricated through a photolithography process on Ni/SiO(2)/Si layers. Carbon nanotube arrays have been grown on 9 nm thick patterned Ni microelectrodes by DC-PECVD. SW48 colon cancer cells were passed over the surface of CNT covered electrodes to be specifically entrapped on elastic nanotube beams. CNT arrays act as both adhesive and conductive agents and impedance changes occurred as fast as 30 s (for whole entrapment and signaling processes). CNT-ECIS detected the cancer cells with the concentration as low as 4000 cells cm(-2) on its surface and a sensitivity of 1.7 × 10(-3)Ω cm(2). Time and cell efficiency factor (TEF and CEF) parameters were defined which describe the sensor's rapidness and resolution, respectively. TEF and CEF of CNT-ECIS were much higher than other cell based electrical biosensors which are compared in this paper.

An in vitro system for modeling brain reactive responses and changes in neuroprosthetic device impedance

Currently available methods for analyzing the structural properties of neural tissue are limited by the frequency at which data can be collected and by the need to sacrifice the specimen to correlate histology with other data. Electrical impedance spectroscopy (EIS) can be used to complement conventional histological and imaging-based methods by measuring real-time electrical data that can be ascribed to changes in tissue composition and structure. This report describes an impedance-based method for the analysis and modeling of the electrical properties of three-dimensional neural tissue constructs in vitro. This model system was used to assess the effects of cell density, type and organization on neuroprosthetic device electrode performance.