Filamentous Fungi and Mycotoxins in Cheese: A Review

In silico bioprospecting of receptors associated with the mechanism of action of Rondonin, an antifungal peptide from spider Acanthoscurria rondoniae haemolymph

Multiple drug-resistant fungal species are associated with the development of diseases. Thus, more efficient drugs for the treatment of these aetiological agents are needed. Rondonin is a peptide isolated from the haemolymph of the spider Acanthoscurria rondoniae. Previous studies have shown that this peptide has antifungal activity against Candida sp. and Trichosporon sp. strains, acting on their genetic material. However, the molecular targets involved in its biological activity have not yet been described. Bioinformatics tools were used to determine the possible targets involved in the biological activity of Rondonin. The PharmMapper server was used to search for microorganismal targets of Rondonin. The PatchDock server was used to perform the molecular docking. UCSF Chimera software was used to evaluate these intermolecular interactions. In addition, the I-TASSER server was used to predict the target ligand sites. Then, these predictions were contrasted with the sites previously described in the literature. Molecular dynamics simulations were conducted for two promising complexes identified from the docking analysis. Rondonin demonstrated consistency with the ligand sites of the following targets: outer membrane proteins F (id: 1MPF) and A (id: 1QJP), which are responsible for facilitating the passage of small molecules through the plasma membrane; the subunit of the flavoprotein fumarate reductase (id: 1D4E), which is involved in the metabolism of nitrogenous bases; and the ATP-dependent Holliday DNA helicase junction (id: 1IN4), which is associated with histone proteins that package genetic material. Additionally, the molecular dynamics results indicated the stability of the interaction of Rondonin with 1MPF and 1IN4 during a 10 ns simulation. These interactions corroborate with previous in vitro studies on Rondonin, which acts on fungal genetic material without causing plasma membrane rupture. Therefore, the bioprospecting methods used in this research were considered satisfactory since they were consistent with previous results obtained via in vitro experimentation.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40203-024-00224-1.

Occurrence, Risk Implications, Prevention and Control of CIT in Monascus Cheese: A Review

Monascus is a filamentous fungus that has been used in the food and pharmaceutical industries. When used as an auxiliary fermenting agent in the manufacturing of cheese, Monascus cheese is obtained. Citrinin (CIT) is a well-known hepatorenal toxin produced by Monascus that can harm the kidneys structurally and functionally and is frequently found in foods. However, CIT contamination in Monascus cheese is exacerbated by the metabolic ability of Monascus to product CIT, which is not lost during fermentation, and by the threat of contamination by Penicillium spp. that may be introduced during production and processing. Considering the safety of consumption and subsequent industrial development, the CIT contamination of Monascus cheese products needs to be addressed. This review aimed to examine its occurrence in Monascus cheese, risk implications, traditional control strategies, and new research advances in prevention and control to guide the application of biotechnology in the control of CIT contamination, providing more possibilities for the application of Monascus in the cheese industry.

Cytotoxic Effects of Major and Emerging Mycotoxins on HepaRG Cells and Transcriptomic Response after Exposure of Spheroids to Enniatins B and B1

Mycotoxins, produced by fungi, frequently occur at different stages in the food supply chain between pre- and postharvest. Globally produced cereal crops are known to be highly susceptible to contamination, thus constituting a major public health concern. Among the encountered mycotoxigenic fungi in cereals, Fusarium spp. are the most frequent and produce both regulated (i.e., T-2 toxin, deoxynivalenol -DON-, zearalenone -ZEA-) and emerging (i.e., enniatins -ENNs-, beauvericin -BEA-) mycotoxins. In this study, we investigated the in vitro cytotoxic effects of regulated and emerging fusariotoxins on HepaRG cells in 2D and 3D models using undifferentiated and differentiated cells. We also studied the impact of ENN B1 and ENN B exposure on gene expression of HepaRG spheroids. Gene expression profiling pinpointed the differentially expressed genes (DEGs) and overall similar pathways were involved in responses to mycotoxin exposure. Complement cascades, metabolism, steroid hormones, bile secretion, and cholesterol pathways were all negatively impacted by both ENNs. For cholesterol biosynthesis, 23/27 genes were significantly down-regulated and could be correlated to a 30% reduction in cholesterol levels. Our results show the impact of ENNs on the cholesterol biosynthesis pathway for the first time. This finding suggests a potential negative effect on human health due to the essential role this pathway plays.

The Microbial Diversity on the Surface of Smear-Ripened Cheeses and Its Impact on Cheese Quality and Safety

Smear-ripened cheeses are characterized by a viscous, red-orange surface smear on their rind. It is the complex surface microbiota on the cheese rind that is responsible for the characteristic appearance of this cheese type, but also for the wide range of flavors and textures of the many varieties of smear-ripened cheeses. The surface smear microbiota also represents an important line of defense against the colonization with undesirable microorganisms through various types of interaction, such as competitive exclusion or production of antimicrobial substances. Predominant members of the surface smear microbiota are salt-tolerant yeast and bacteria of the phyla Actinobacteria, Firmicutes, and Proteobacteria. In the past, classical culture-based approaches already shed light on the composition and succession of microorganisms and their individual contribution to the typicity of this cheese type. However, during the last decade, the introduction and application of novel molecular approaches with high-resolution power provided further in-depth analysis and, thus, a much more detailed view of the composition, structure, and diversity of the cheese smear microbiota. This led to abundant novel knowledge, such as the identification of so far unknown community members. Hence, this review is summarizing the current knowledge of the diversity of the surface smear microbiota and its contribution to the quality and safety of smear-ripened cheese. If the succession or composition of the surface-smear microbiota is disturbed, cheese smear defects might occur, which may promote food safety issues. Hence, the discussion of cheese smear defects in the context of an increased understanding of the intricate surface smear ecosystem in this review may not only help in troubleshooting and quality control but also paves the way for innovations that can lead to safer, more consistent, and higher-quality smear-ripened cheeses.

New colours for old in the blue-cheese fungus Penicillium roqueforti

Penicillium roqueforti is used worldwide in the production of blue-veined cheese. The blue-green colour derives from pigmented spores formed by fungal growth. Using a combination of bioinformatics, targeted gene deletions, and heterologous gene expression we discovered that pigment formation was due to a DHN-melanin biosynthesis pathway. Systematic deletion of pathway genes altered the arising spore colour, yielding white to yellow-green to red-pink-brown phenotypes, demonstrating the potential to generate new coloured strains. There was no consistent impact on mycophenolic acid production as a result of pathway interruption although levels of roquefortine C were altered in some deletants. Importantly, levels of methyl-ketones associated with blue-cheese flavour were not impacted. UV-induced colour mutants, allowed in food production, were then generated. A range of colours were obtained and certain phenotypes were successfully mapped to pathway gene mutations. Selected colour mutants were subsequently used in cheese production and generated expected new colourations with no elevated mycotoxins, offering the exciting prospect of use in future cheese manufacture.

Strategies to control mycotoxins and toxigenic fungi contamination by nano-semiconductor in food and agro-food: a review

Mycotoxins are toxic secondary metabolites generated from toxigenic fungi in the contaminated food and agro-food, which have been regarded as a serious threat to the food safety and human health. Therefore, the control of mycotoxins and toxigenic fungi contamination is of great significance and has attracted the increasing attention of researchers. As we know, nano-semiconductors have many unique properties such as large surface area, structural stability, good biocompatibility, excellent photoelectrical properties, and low cost, which have been developed and applied in many research fields. Recently, nano-semiconductors have also been promisingly applied in mitigating or controlling mycotoxins and toxigenic fungi contaminations in food and agro-food. In this review, the type, occurrence, and toxicity of main mycotoxins in food and agro-food were introduced. Then, a variety of strategies to mitigate the mycotoxin contamination based on nano-semiconductors involving mycotoxins detection, inhibition of toxigenic fungi, and mycotoxins degradation were summarized. Finally, the outlook, opportunities, and challenges have prospected in the future for the mitigation of mycotoxins and toxigenic fungi based on nano-semiconductors.

Prevalence and concentration of aflatoxin M1 and ochratoxin A in cheese: a global systematic review and meta-analysis and probabilistic risk assessment

Exposure to mycotoxins such as aflatoxins can endanger human health, especially infants and children. In this study, an attempt was made to retrieved studies related to the concentration of aflatoxin M1 (AFM1) and ochratoxin A (OTA). Search was performed in international databases such as Embase, PubMed, Scopus, and Web of Science for the period 1 January 2010 to 20 February 2023. Then, the pooled concentration in the defined subgroups was calculated using meta-analysis and the health risk assessment was conducted by margin of exposure (MOEs). Thirty-one scientific papers with 34 data reports (Sample size=2,277) were included in our study. The lowest and highest prevalence of AFM1 in cheese was related to El Salvador (12.18 %) and Serbia (100.00 %). The pooled prevalence of AFM1 was 49.85 %, 95 %CI (37.93-61.78 %). The lowest and highest prevalence of OTA in cheese was related to Türkiye (6.67 %) and Italy (44.21 %). The pooled prevalence of OTA was 35.64 %, 95 %CI (17.16-56.44 %). Health risk of AFM1 revealed that except Pakistan and Iran, MOE in the other countries was lower than 10,000 for adults and also except Pakistan, MOE for other countries was lower than 10,000 for children. Health risk of OTA revealed that except Greece, MOE in the other countries was higher than 10,000 for adults and also except Germany and Greece, MOE for other countries was higher than 10,000 for children. Therefore, it is recommended to conduct control plans to reduce the concentration of mycotoxins in cheese, especially AFM1.

Impact of carbon dioxide on the radial growth of fungi isolated from dairy environment

In dairy industry, filamentous fungi are used as adjunct cultures in fermented products for their technological properties but they could also be responsible for food spoilage and mycotoxin production. The consumer demands about free-preservative products has increased in recent years and lead to develop alternative methods for food preservation. Modified Atmosphere Packaging (MAP) can inhibit fungal growth and therefore increase the food product shelf-life. This study aimed to evaluate radial growth as a function of CO2 and more particularly carbonic acid for fourteen adjuncts and/or fungal spoiler isolated from dairy products or dairy environment by using predictive mycology tools. The impact of the different chemical species linked to CO2 (notably carbonic acid) were study because it was reported previously that undissociated carbonic acid impacted bacterial growth and bicarbonates ions were involved in modifications of physiological process of fungal cells. A significant diversity in the responses of selected strains was observed. Mucor circinelloides had the fastest growth rates (μ > 11 mm. day-1) while Bisifusarium domesticum, Cladosporium herbarum and Penicillium bialowiezense had the slowest growth rates (μ < 1 mm. day-1). Independently of the medium pH, the majority of strains were sensitive to total carbonic acid. In this case, it was not possible to conclude if CO2 active form was gaseous or aqueous so modeling were performed as a function of CO2 percentage. Only Geotrichum candidum and M. circinelloides strains were sensitive to undissociated carbonic acid. Among the fourteen strains, P. bialowiezense was the less sensitive strain to CO2, no growth was observed at 50% of CO2 only for this strain. M. lanceolatus was the less sensitive strain to CO2, the CO250 which reduce the growth rates by 50% was estimated at 138% of CO2. Low CO2 percentage improved the growth of Penicillium expansum, Penicillium roqueforti and Paecilomyces niveus. Mathematical models (without and with optimum) were suggested to describe the impact of CO2 percentage or undissociated carbonic acid concentration on fungal growth rate.

Survey of knowledge, and attitudes to storage practices preempting the occurrence of filamentous fungi and mycotoxins in some Ghanaian staple foods and processed products

Mycotoxigenic fungi can infect and produce potent mycotoxins in foodstuffs prior to harvest, during harvest (field fungi), and in storage after harvest (storage fungi), which when ingested, can result in adverse health effects. This study was aimed at assessing the knowledge, attitudes, and practices adopted by the Ghanaian populace to help mitigate the occurrence of molds and mycotoxins in foods. A cross-sectional survey involving a structured questionnaire was conducted with 642 respondents from twelve regions of Ghana. Descriptive statistics and analyses of variance were calculated. Correct Classification Rate (CCR) was measured to assess the utility of a logistic regression model. The results of the study showed that the majority of 299 (46.6%) of the respondents were between the ages of 18-25. Age and educational level were related to knowledge about the occurrence of fungi and mycotoxins in foods (p < 0.05). More than half the respondents, 50% indicated that they knew of aflatoxins as a major mycotoxin present in food. Higher education directly influenced on the knowledge of mycotoxicosis and the management of stored food to present intoxication by fungal metabolites. 502 (32.9%) knew that consuming foods with toxins could cause stomach aches. The most commonly consumed food commodity despite the presence of visible growth of fungi was bread (35.3%). The average KAP score for knowledge showed that, out of 100%, there was adequate knowledge (63.8%) among the members of the Ghanaian populace. Favorable environmental conditions of high humidity (> 85% ERH) and temperature (> 28-32 °C) enhance the proliferation of fungi in most foods and the attendant production of mycotoxins such as aflatoxins, ochratoxins, and fumonisins are associated with several severe human and animal health conditions; mycotoxicosis was associated with high fever, pain, vomiting, suppression of immunity, cancer, etc. when these foods are consumed on regular basis for a prolonged length of time. Future examination of the food items used for the School Feeding Programme in Ghana will offer opportunities to examine the risks of feeding youth with fungal-contaminated food preparations from providers.

Detection of mycotoxins in cheese using an optimized analytical method based on a QuEChERS extraction and UHPLC-MS/MS quantification

Mycotoxins can produce toxic effects on humans; hence, it is of high importance to determine their presence in food products. This work presents a reliable method for the quantification of 32 mycotoxins in cheese. The analysis procedure was optimized based on a QuEChERS extraction process and the ultra-high performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS) detection. The analysis method was validated for four cheese varieties (emmental, blue, brie and camembert) in terms of linearity, sensitivity, matrix effect, accuracy and precision. Satisfactory precision and accuracy values were achieved, with recoveries above 70% for most mycotoxins. The developed method was applied to the analysis of 38 commercial cheese samples. A high occurrence of beauvericin and enniatins were found, ranging from 31% for enniatin A to 100% for enniatin B. The ochratoxin A was detected in three samples at concentrations that may pose a risk to human health.

Filamentous fungi in artisanal cheeses: A problem to be avoided or a market opportunity?

The microbial diversity of artisanal cheeses has been ever more extensively explored over recent years. Many new studies have been particularly focused on the detection and identification of fungi associated with cheese rinds. This is not surprising given that the composition and abundance of fungi on the cheese surface can significantly contribute to desirable sensory qualities, while also contributing to defects, particularly during ripening, and risks associated with the production of mycotoxins. Here we critically review the impact of fungi on the quality of artisanal cheeses, as well as the risks associated with the presence of particular species or strains with specific phenotypes. Ultimately, we address the question; should fungi be predominantly considered villains when it comes to artisanal cheese safety or could their presence be better exploited by producers in order to generate innovative products with greater added value? Such discussions will be increasingly important from the perspective of the future commercialization and regulation of artisanal cheeses that frequently contain a high abundance of moulds.

Prevention of Fungal Contamination in Semi-Hard Cheeses by Whey–Gelatin Film Incorporated with Levilactobacillus brevis SJC120

Cheese whey fermented by lactic acid bacteria (LAB) was used to develop an edible film with antifungal properties. Five LAB strains isolated from artisanal cheeses were screened for antifungal activity and incorporated into a whey–gelatin film. Of the strains tested, Levilactobacillus brevis SJC120 showed the strongest activity against five filamentous fungi isolated from cheese and cheese-making environment, at both 10 °C and 20 °C. The cell-free supernatant from L. brevis inhibited fungal growth by more than 80%. Incorporation of bacterial cells into the film did not alter the moisture content, water vapor permeability, or mechanical and optical properties. The whey–gelatin film was also able to maintain the viability of L. brevis cells at 107 log CFU/g after 30 days at 10 °C. In cheeses wrapped with L. brevis film, the size of fungal colonies decreased by 55% to 76%. Furthermore, no significant differences (p > 0.05) were observed in cheese proteolysis or in the moisture, fat, and protein content of the cheese wrapped with films. The results showed that whey–gelatin film with L. brevis SJC120 can reduce the contamination of cheese with filamentous fungi and could be used as an alternative to conventional cheese preservation and packaging.

Impact of environmental factors on ochratoxin A: From natural occurrence to control strategy

Ochratoxin A (OTA) contamination and the associated issues of food security, food safety and economic loss are widespread throughout the world. The occurrence of OTA depends on ochratoxigenic fungi, foodstuffs and their environment. In this review, natural occurrence and control strategy of OTA, with a focus on the impact of environmental factors, are summarized. First, this manuscript introduces potentially contaminated foodstuffs, including the emerging ones which are not regulated in international legislation. Secondly, it gives an update of native producers based on foodstuffs and OTA biosynthesis. Thirdly, complicated environmental regulation is disassembled into individual factors in order to clarify their regulatory effect and mechanism. Finally, to emphasize control OTA at all stages of foodstuffs from farm to table, strategies used at crop planting, harvest, storage and processing stages are discussed.

Diversity of Filamentous Fungi Associated with Dairy Processing Environments and Spoiled Products in Brazil

Few studies have investigated the diversity of spoilage fungi from the dairy production chain in Brazil, despite their importance as spoilage microorganisms. In the present study, 109 filamentous fungi were isolated from various spoiled dairy products and dairy production environments. The isolates were identified through sequencing of the internal transcribed spacer (ITS) region. In spoiled products, Penicillium and Cladosporium were the most frequent genera of filamentous fungi and were also present in the dairy environment, indicating that they may represent a primary source of contamination. For dairy production environments, the most frequent genera were Cladosporium, Penicillium, Aspergillus, and Nigrospora. Four species (Hypoxylon griseobrunneum, Rhinocladiella similis, Coniochaeta rosae, and Paecilomyces maximus) were identified for the first time in dairy products or in dairy production environment. Phytopathogenic genera were also detected, such as Montagnula, Clonostachys, and Riopa. One species isolated from the dairy production environment is classified as the pathogenic fungi, R. similis. Regarding the phylogeny, 14 different families were observed and most of the fungi belong to the Ascomycota phylum. The understanding of fungal biodiversity in dairy products and environment can support the development of conservation strategies to control food spoilage. This includes the suitable use of preservatives in dairy products, as well as the application of specific cleaning and sanitizing protocols designed for a specific group of target microorganisms.

Metabolic and pharmacological profiling of Penicillium claviforme by a combination of experimental and bioinformatic approaches

BACKGROUND

Penicillium produces a wide range of structurally diverse metabolites with significant pharmacological impacts in medicine and agriculture. For the first time, a complete metabolome of Penicillium claviforme (P. claviforme) (FBP-DNA-1205) was studied alongside pharmacological research in this study.

METHODS

The metabolic profile of P. claviforme fermented on Potato Dextrose Broth (PDB) was investigated in this work. The complete metabolomics studies of fungus were performed using GC-MS and LC-MS-QTOF techniques. An in vitro model was utilised to study the cytotoxic and antioxidant activities, while an in vivo model was employed to investigate the antinociceptive and acute toxicity activities. Molecular Operating Environment (MOE) software was used for molecular docking analysis.

RESULTS

GC-MS study showed the presence of alkanes, fatty acids, esters, azo and alcoholic compounds. Maculosin, obtain, phalluside, quinoline, 4,4'-diaminostilbene, funaltrexamine, amobarbital, and fraxetin were among the secondary metabolites identified using the LC-MS-QTOF technique. The n-hexane fraction of P. claviforme displayed significant cytotoxic activity in vitro, with an LD50 value of 92.22 µgml^-1. The antinociceptive effects in vivo were dose-dependent significantly (p < .001). Interestingly, during the 72 h of investigation, no acute toxicity was demonstrated. In addition, a docking study of tentatively identified metabolites against the inflammatory enzyme (COX-2) supported the antinociceptive effect in an in silico model.

CONCLUSION

Metabolic profile of P. claviforme shows the presence of biologically relevant compounds in ethyl acetate extract. In addition, P. claviforme exhibits substantial antioxidant and cytotoxic activities in an in vitro model as well as antinociceptive activity in an in vivo model. The antinociceptive action is also supported by a molecular docking study. This research has opened up new possibilities in the disciplines of mycology, agriculture, and pharmaceutics. Key messagesThe first time explored complete metabolome through GC-MS and LC-MS-QTOF.Both in vivo & in vitro pharmacological investigation of P. claviforme.In silico molecular docking of LC-MS-QTOF metabolites.

Fungal community and physicochemical profiles of ripened cheeses from the Canastra of Minas Gerais, Brazil

Canastra's Minas artisanal cheese [QMA (Minas artisanal cheese)] is a protected geographical indication traditional food. The influence of fungi on the cheese ripening process is of great importance. This study aimed to apply culture-dependent and -independent methods to determine the mycobiota of QMA produced in the Canastra region, as well as to determine its physicochemical characteristics. Illumina-based amplicon sequencing and matrix-assisted laser desorption ionization time-of-flight mass spectrometry were the culture-independent methods used. The physicochemical analysis results showed that the QMA has a moisture content ranging 18.4-28.2%, fat content ranging 20.5-40%, sodium chloride percentage of approximately 0.9%, and pH ranging 5.2-5.5. The population of fungi ranged between 6.3 and 8 log colony-forming unit/g. Fusarium spp., Geotrichum candidum, Paecilomyces spp., Trichosporon coremiiforme, Candida catenulata, Aspergillus spp., Trichosporon japonicum, Aspergillus oryzae, Kluyveromyces spp., Torulaspora spp., and Debaryomyces spp. were the most prevalent fungi. The methods used to evaluate the mycobiota provide a better understanding of which species are present in the final product and eventually contribute to the characteristics of QMA. Geotrichum candidum and C. catenulata were identified as promising species for future studies on product quality.

Lactic Acid Bacteria in Raw-Milk Cheeses: From Starter Cultures to Probiotic Functions

Traditional cheeses produced from raw milk exhibit a complex microbiota, characterized by a sequence of different microorganisms from milk coagulation and throughout maturation. Lactic acid bacteria (LAB) play an essential role in traditional cheese making, either as starter cultures that cause the rapid acidification of milk or as secondary microbiota that play an important role during cheese ripening. The enzymes produced by such dynamic LAB communities in raw milk are crucial, since they support proteolysis and lipolysis as chief drivers of flavor and texture of cheese. Recently, several LAB species have been characterized and used as probiotics that successfully promote human health. This review highlights the latest trends encompassing LAB acting in traditional raw milk cheeses (from cow, sheep, and goat milk), and their potential as probiotics and producers of bioactive compounds with health-promoting effects.

Detection of Potential Microbial Contaminants and Their Toxins in Fermented Dairy Products: a Comprehensive Review

Fermented dairy products are dominant constituents of daily diets around the world due to their desired organoleptic properties, long shelf life, and high nutritional value. Probiotics are often incorporated into these products for their health and technological benefits. However, the safety and possible contamination of fermented dairy products during the manufacturing process could have significant deleterious health and economic impacts. Pathogenic microorganisms and toxins from different sources in fermented dairy products contribute to outbreaks and toxicity cases. Although the health and nutritional benefits of fermented dairy products have been extensively investigated, safety hazards due to contamination are relatively less explored. As a preventive measure, it is crucial to accurately identify and determine the associated microbiota or their toxins. It is noteworthy to highlight the importance of detecting not only the pathogenic microbiota but also their toxic metabolites so that putative outbreaks can thereby be prevented or detected even before they cause harmful effects to human health. In this context, this review focuses on describing techniques designed to detect potential contaminants; also, the advantages and disadvantages of these techniques were summarized. Moreover, this review compiles the most recent and efficient analytical methods for detecting microbial hazards and toxins in different fermented dairy products of different origins. Causative agents behind contamination incidences are also discussed briefly to aid in future prevention measures, as well as detection approaches and technologies employed. Such approach enables the elucidation of the best strategies to control contamination in fermented dairy product manufacturing processes.

Analysis of Mycotoxin and Secondary Metabolites in Commercial and Traditional Slovak Cheese Samples

Cheese represents a dairy product extremely inclined to fungal growth and mycotoxin production. The growth of fungi belonging to Aspergillus, Penicillium, Fusarium, Claviceps, Alternaria, and Trichoderma genera in or on cheese leads to undesirable changes able to affect the quality of the final products. In the present investigation, a total of 68 types of commercial and traditional Slovak cheeses were analyzed to investigate the occurrence of fungal metabolites. Altogether, 13 fungal metabolites were identified and quantified. Aflatoxin M1, the only mycotoxin regulated in milk and dairy products, was not detected in any case. However, the presence of metabolites that have never been reported in cheeses, such as tryptophol at a maximum concentration level from 13.4 to 7930 µg/kg (average: 490 µg/kg), was recorded. Out of all detected metabolites, enniatin B represents the most frequently detected mycotoxin (0.06–0.71 µg/kg) in the analyzed samples. Attention is drawn to the lack of data on mycotoxins’ origin from Slovak cheeses; in fact, this is the first reported investigation. Our results indicate the presence of fungal mycotoxin contamination for which maximum permissible levels are not established, highlighting the importance of monitoring the source and producers of contamination in order to protect consumers’ health.

The control of fungi and mycotoxins by food active packaging: a review

Conventionally used petrochemical-based plastics are poorly degradable and cause severe environmental pollution. Alternatively, biopolymers (e.g., polysaccharides, proteins, lipids, and their blends) are biodegradable and environment-friendly, and thus their use in packaging technologies has been on the rise. Spoilage of food by mycotoxigenic fungi poses a severe threat to human and animal health. Hence, because of the adverse effects of synthetic preservatives, active packaging as an effective technique for controlling and decontaminating fungi and related mycotoxins has attracted considerable interest. The current review aims to provide an overview of the prevention of fungi and mycotoxins through active packaging. The impact of different additives on the antifungal and anti-mycotoxigenic functionality of packaging incorporating active films/coatings is also investigated. In addition, active packaging applications to control and decontaminate common fungi and mycotoxins in bakery products, cereal grains, fruits, nuts, and dairy products are also introduced. The results of recent studies have confirmed that biopolymer films and coatings incorporating antimicrobial agents provide great potential for controlling common fungi and mycotoxins and enhancing food quality and safety.

Lactic Acid Bacteria as Biopreservation Against Spoilage Molds in Dairy Products - A Review

Mold spoilage of dairy products such as yogurt is a concern in dairy industry. Not only does it lead to substantial food waste, economic losses, and even brand image damage, but it may also cause public health concern due to the potential production of mycotoxin. Good hygiene practices are necessary to prevent contamination, but contamination may nevertheless occur at the production site and, not least, at the site of the consumer. In recent years, there has been a growing interest from consumers for "clean label" food products, which are natural, less-processed, and free of added, chemical preservatives, and a wish for shelf lives of considerable length in order to minimize food waste. This has sparked an interest in using lactic acid bacteria (LAB) or their metabolites as biopreservatives as a way to limit the growth of spoilage organisms in dairy products. A range of compounds produced by LAB with potential antifungal activity have been described as contributing factors to the inhibitory effect of LAB. More recently, growth inhibition effects caused by specific competitive exclusion have been elucidated. It has also become clear that the sensitivity toward both individual antifungal compounds and competition mechanisms differ among molds. In this review, the main spoilage molds encountered in dairy products are introduced, and an overview of the antifungal activity of LAB against different spoilage molds is presented including the main antifungal compounds derived from LAB cultures and the sensitivity of the spoilage molds observed toward these compounds. The recent findings of the role of competitive exclusion with emphasis on manganese depletion and the possible implications of this for biopreservation are described. Finally, some of the knowledge gaps, future challenges, and trends in the application of LAB biopreservation in dairy products are discussed.

Omics Approaches to Assess Flavor Development in Cheese

Cheese is characterized by a rich and complex microbiota that plays a vital role during both production and ripening, contributing significantly to the safety, quality, and sensory characteristics of the final product. In this context, it is vital to explore the microbiota composition and understand its dynamics and evolution during cheese manufacturing and ripening. Application of high-throughput DNA sequencing technologies have facilitated the more accurate identification of the cheese microbiome, detailed study of its potential functionality, and its contribution to the development of specific organoleptic properties. These technologies include amplicon sequencing, whole-metagenome shotgun sequencing, metatranscriptomics, and, most recently, metabolomics. In recent years, however, the application of multiple meta-omics approaches along with data integration analysis, which was enabled by advanced computational and bioinformatics tools, paved the way to better comprehension of the cheese ripening process, revealing significant associations between the cheese microbiota and metabolites, as well as their impact on cheese flavor and quality.

Serbian Traditional Goat Cheese: Physico-Chemical, Sensory, Hygienic and Safety Characteristics

This research project aimed to investigate the physico-chemical, sensory, hygienic and safety characteristics of raw goat milk, whey, brine and traditional goat cheese during the ripening period of 28 days. Physico-chemical parameters included the determination of dry matter, fat, ash, protein, pH, water activity and NaCl content. The presence of Enterobacteriaceae and fungi was estimated on milk and cheese samples, and a sensory panel evaluated the products' features and acceptability during ripening. The results show that the cheese under study belongs to the acid full-fat cheese group. A consumer panel attributed high scores to the goat cheese, until the 21st day of ripening. After this period, the overall features altered significantly, including augmented bitterness, odor intensification and the development of molds on the surface. The presence of fungi, associated with Enterobacteriaceae, suggests that the hygiene of the production processes needs to be improved. Regarding microbial safety, the detection of putative pathogens and antibiotic resistances recommend an active surveillance of traditional foods to avoid foodborne infections and/or the dissemination of resistant microorganisms along the food chain.

Microbial Ecology of French Dry Fermented Sausages and Mycotoxin Risk Evaluation During Storage

Dry fermented sausages are produced worldwide by well-controlled fermentation processes involving complex microbiota including many bacterial and fungal species with key technological roles. However, to date, fungal diversity on sausage casings during storage has not been fully described. In this context, we studied the microbial communities from dry fermented sausages naturally colonized or voluntarily surface inoculated with molds during storage using both culture-dependent and metabarcoding methods. Staphylococci and lactic acid bacteria largely dominated in samples, although some halotolerant genera (e.g., Halomonas, Tetragenococcus, and Celerinatantimonas spp.) were also frequently observed. Fungal populations varied from 7.2 to 9.8 log TFU/cm² sausage casing during storage, suggesting relatively low count variability among products. Fungal diversity identified on voluntarily inoculated casings was lower (dominated by Penicillium nalgiovense and Debaryomyces hansenii) than naturally environment-inoculated fermented sausages (colonized by P. nalgiovense, Penicillium nordicum, and other Penicillium spp. and sporadically by Scopulariopsis sp., D. hansenii, and Candida zeylanoïdes). P. nalgiovense and D. hansenii were systematically identified, highlighting their key technological role. The mycotoxin risk was then evaluated, and in situ mycotoxin production of selected mold isolates was determined during pilot-scale sausage productions. Among the identified fungal species, P. nalgiovense was confirmed not to produce mycotoxins. However, some P. nordicum, Penicillium chrysogenum, Penicillium bialowienzense, Penicillium brevicompactum, and Penicillium citreonigrum isolates produced one or more mycotoxins in vitro. P. nordicum also produced ochratoxin A during pilot-scale sausage productions using “worst-case” conditions in the absence of biotic competition. These data provide new knowledge on fermented sausage microbiota and the potential mycotoxin risk during storage.

In-Depth Investigation of the Safety of Wooden Shelves Used for Traditional Cheese Ripening

The main goal of this research was to characterize the bacterial diversity of the wooden boards used for aging traditional Sicilian cheeses and to evaluate whether pathogenic bacteria are associated with these surfaces. Eighteen cheese dairy factories producing three traditional cheese typologies (PDO Pecorino Siciliano, PDO Piacentinu Ennese, and Caciocavallo Palermitano) were selected within the region of Sicily. The wooden shelf surfaces were sampled by a destructive method to detach wood splinters as well as by a nondestructive brushing to collect microbial cells. Scanning electron microscopy showed the presence of almost continuous bacterial formations on the majority of the shelves analyzed. Yeasts and fungal hyphae were also visualized, indicating the complexity of the plank communities. The amplicon library of the 16S rRNA gene V3-V4 region was paired-end sequenced using the Illumina MiSeq system, allowing the identification of 14 phyla, 32 classes, 52 orders, 93 families, and 137 genera. Staphylococcus equorum was identified from all wooden surfaces, with a maximum abundance of 64.75%. Among cheese-surface-ripening bacteria, Brevibacterium and Corynebacterium were detected in almost all samples. Several halophilic (Halomonas, Tetragenococcus halophilus, Chromohalobacter, Salimicrobium, Marinococcus, Salegentibacter, Haererehalobacter, Marinobacter, and Idiomarinaceae) and moderately halophilic (Salinicoccus, Psychrobacter, and Salinisphaera) bacteria were frequently identified. Lactic acid bacteria (LAB) were present at low percentages in the genera Leuconostoc, Lactococcus, Lactobacillus, Pediococcus, and Streptococcus. The levels of viable microorganisms on the wooden shelves ranged between 2.4 and 7.8 log CFU/cm2. In some cases, LAB were counted at very high levels (8.2 log CFU/cm2). Members of the Enterobacteriaceae family were detected in a viable state for only six samples. Coagulase-positive staphylococci, Salmonella spp., and Listeria monocytogenes were not detected. Seventy-five strains belonged to the genera Leuconostoc, Lactococcus, Pediococcus, Enterococcus, Lactobacillus, and Weissella. IMPORTANCE This study provides evidence for the lack of pathogenic bacteria on the wooden shelves used to ripen internal bacterially ripened semihard and hard cheeses produced in Sicily. These three cheeses are not inoculated on their surfaces, and surface ripening is not considered to occur or, at least, does not occur at the same extent as surface-inoculated smear cheeses. Several bacterial groups identified from the wooden shelves are typically associated with smear cheeses, strongly suggesting that PDO Pecorino Siciliano, PDO Piacentinu Ennese, and Caciocavallo Palermitano cheese rind contributes to their final organoleptic profiles.

Mycotoxigenic and phylogenetic perspective to the yeasts and filamentous moulds in mould-matured Turkish cheese

This study was conducted to determine the diversity of yeasts and filamentous moulds in mould-matured cheese (MMC) consumed in Turkey. Overall, 120 samples were collected from 12 different geographical locations between March 2016 and April 2017. The morphological observation was applied in combination with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and molecular analyses to determine yeasts and filamentous moulds in the cheeses. High-performance liquid chromatography (HPLC) technique was used to evaluate the ability of mycotoxins production of fungal isolates and the presence of mycotoxins in cheese samples. A total of 241 fungi (81 filamentous moulds and 160 yeast) were recovered, and Penicillium roqueforti and Debaryomyces hansenii were the most frequently isolated species in all cheese samples. The rep-PCR results indicated a high level of genetic diversity among fungal isolates, regardless of isolation source or geographical origin. Filamentous mould strains isolated from MMC were found to synthesize at least one mycotoxin (Aflatoxin B₁, B₂, G₁ and G₂, citrinine, cyclopiazonic acid, mycophenolic acid, ochratoxin A, penicillic acid and roquefortine C). Although mycotoxin producing ability was observed from all isolates, none of the cheese samples were found positive for these mycotoxins. AFM₁ was detected in 8 (6.6%) MMC samples from which 2 (1.6%) were above the legal limits (0.05 μg/kg) set by the Turkish Food Codex (TFC) and European Commission (EC). In conclusion, Turkish MMCs were found to be contaminated with toxigenic fungi, so a potential public health risk, while low, exists. Therefore, the selection of nontoxigenic filamentous mould strains for cheese manufacturing and control of the ripening conditions is a critical need to ensure the quality and safety of Turkish MMC.

Knowledge and Behavioral Habits to Reduce Mycotoxin Dietary Exposure at Household Level in a Cohort of German University Students

Mycotoxins pose a health concern for humans. Therefore, strategies at pre- and post-harvest and maximum levels for food have been implemented, aimed to minimize the risk of dietary exposure. Yet, consumers’ dietary habits and life style play a substantial role in overall exposure. The aim of this study was to investigate knowledge of mycotoxins and accordance to behavioral practices or habits that may affect the risk of mycotoxin dietary exposure at the household level or when food commodities are obtained from non-regulated trade markets. For this purpose, an online survey was applied to a university student cohort (n = 186). The survey consisted of 23 questions grouped in five categories: Socio-demographic and income data, general life style and habits, knowledge about mycotoxins, compliance with the “17 golden rules to prevent mycotoxin contamination” of the German Federal Institute for Risk Assessment (BfR), and measures towards reducing health risks. We paid particular attention to knowledge and compliance of a group acquiring food items in markets outside regulation and surveillance, namely, adherents of food movements such as food sharing or dumpster diving. The results of our study indicate a generally rather low level of knowledge about mycotoxins in the investigated cohort, as well as a weak perception of their associated risks compared to similar studies; around half of the cohort was unfamiliar with the term “mycotoxin” and the health risks of mycotoxins were considered comparable to those of pesticides, heavy metals, microplastics and food additives. We observed, in general, a relatively high degree of compliance with the proposed golden rules. The rules with the highest compliance related to deteriorated foods with visible signs of fungal infestation, probably because these are already considered as food waste. Rules that were less followed included those that require a specific knowledge of food storage and early fungal contamination stages, namely preventive measures related to storage of bread. Adherents of food movements did not differ significantly with the control group in terms of knowledge, risk perception and compliance with the 17 golden rules. This may be due to the homogeneity of the cohort in terms of demography, age and educational level. However, significant low compliance in the food movements group was observed with the rules “Buy fruit and vegetables that are as intact as possible, i.e., without injuries and bruises” and “Rotten fruit should neither be eaten nor further processed into compote or jam”, possibly because of ideological convictions around reducing food waste. In conclusion, mycotoxin prevention strategies should not end at the retail level; in particular, clarification and information regarding health risk from mycotoxins are suggested in order to reduce the risk of exposure in private households or in informal trade markets. The results of this study should, however, be interpreted with caution due to the specific characteristics of the cohort in terms of age and educational level and the disparity in size between the control and the food movement group. This study is a starting point for evaluating and understanding the consumer perspective on mycotoxins.

Occurrence of Ochratoxin A in Different Types of Cheese Offered for Sale in Italy

The detection of Ochratoxin A (OTA) in the milk of ruminants occurs infrequently and at low levels, but its occurrence may be higher in dairy products such as cheese. The aim of this study was to investigate the presence of OTA in cheeses purchased in the metropolitan city of Bologna (Italy) and the surrounding area. For the analysis, a LC-MS/MS method with a limit of quantification (LOQ) of 1 µg/kg was used. OTA was detected in seven out of 51 samples of grated hard cheese (concentration range 1.3-22.4 µg/kg), while it was not found in the 33 cheeses of other types which were also analysed. These data show a low risk of OTA contamination for almost all types of cheese analysed. To improve the safety of cheese marketed in grated form, more regulations on cheese rind, which is the part most susceptible to OTA-producing moulds, should be implemented or, alternatively, producers should consider not using the rind as row material for grated cheese. It would be interesting to continue these investigations particularly on grated hard cheeses to have more data to update the risk assessment of OTA in cheese, as also suggested by EFSA in its 2020 scientific opinion on OTA.

Biological Activity of Extracts from Aromatic Plants as Control Agents against Spoilage Molds Isolated from Sheep Cheese

The aim of this work was to assess the antifungal and antioxidant activity of essential oils and ethanolic extracts from distilled solid by-products from aromatic plants (Artemisia dracunculus, Hyssopus officinalis, Lavandula stoechas, Origanum vulgare and Satureja montana) against 14 fungi strains isolated from sheep cheese and identified at species level using DNA barcoding based on β-tubulin sequence analysis. In addition, capacity of fungi to produce ochratoxin A, patulin, cyclopiazonic acid and sterigmatocystin was analyzed. Of the isolates, 85.7% belonged to Penicillium (P. commune/biforme, P. crustosum) and 14.3% to Aspergillus (A. puulaauensis and A. jensenii), the first time that these Aspergillus species have been found in sheep's cheese. All P. commune isolates were producers of cyclopiazonic acid, and the two Aspergillus strains produced sterigmatocystin, but the others did not produce any tested mycotoxin. Among the essential oils tested, oregano, savory and tarragon had a significant antifungal activity against all the isolated strains, but no ethanolic extract showed antifungal activity. By contrast, ethanolic extracts showed great potential as antioxidants. The identification of new molds in cheese will help the dairy industry to know more about those molds affecting the sector, and the use of aromatic plants in the control of fungal spoilage could be a suitable alternative to chemical preservatives used in the agri-food industry.

Impact of granite irradiation on aflatoxin reduction in pistachio

In this research with the effect of radioactive granite gamma radiation, the reduction of aflatoxin B1 in pistachios was examined in three steps. In the first step, the aflatoxin reduction in small packets by granite bed was tested. In this step, the aflatoxin level of 300 g pistachios packets was reduced up to 81.3 ± 1.5 percent by 4 kg granite bed after 4 days. After observation of aflatoxin reduction by granite bed, the second step was done with increasing the granite and pistachio mass and irradiation time. In this step, the aflatoxin level of 1 kg pistachios was reduced up to 4949 ± 2.6 percent by 6 kg granite after 9 days. According to the results, the aflatoxin reduction of 1 kg pistachios by 1 kg granite after 1 days (as aflatoxin Reduction Coefficient (ARC)) was calculated as ARC = 0.0090 ± 0.0025 (kg. day)^-1. The aflatoxin types of detected in this research were B1 and B2 types that AFB2 level was much less than one. Therefore the effect of granite irradiation on AFB2 reduction wasn't considered. The final step was designed for testing the aflatoxin Reduction Coefficient (ARC). This step was shown that the confidence level between practical result and aflatoxin Reduction Coefficient (ARC) result is about 97 percent. The results indicated that the level of fat and protein of pistachios by granite gamma radiation did not change after 9 days. Therefore the granite irradiation can be used for aflatoxin reduction of pistachios.

An overview of Trichoderma reesei co-cultures for the production of lignocellulolytic enzymes

Biorefineries are core facilities for implementing a sustainable circular bioeconomy. These facilities rely on microbial enzymes to hydrolyze lignocellulosic substrates into fermentable sugars. Fungal co-cultures mimic the process of natural biodegradation and have been shown to increase certain enzyme activities. Trichoderma reesei and its many mutant strains are major cellulase producers and are heavily utilized as a source of carbohydrate-active enzymes. Several reports have demonstrated that T. reesei co-cultures present higher enzyme activities compared with its monocultures, especially in the context of β-glucosidase activity. The performance of T. reesei during co-culturing has been assessed with several fungal partners, including Aspergillus niger, one of the most recurrent partners. Various aspects of co-cultivation still need further investigation, especially regarding the molecular interactions between fungi in controlled environments and the optimization of the resulting enzyme cocktails. Since plenty of genetic and physiological data on T. reesei is available, the species is an outstanding candidate for future co-culture investigations. Co-cultures are still a developing field for industrial enzyme production, and many aspects of the technique need further improvement before real applications. KEY POINTS: • T. reesei co-cultures are an alternative for producing lignocellulolytic enzymes. • Several reports suggest an increase in certain enzyme activities in co-cultures. • More in-depth investigations of co-cultures are necessary for advancing this field.

Microbiological quality and safety of Brazilian artisanal cheeses

The establishment of norms that regulates the production and trade of Brazilian Artisanal Cheeses (BAC) has been stimulating many small farmers for this activity. The predominance of lactic acid bacteria (LAB) is a typical characteristic of BAC, which confers desirable attributes to artisanal cheeses. However, these products can be contaminated by other microbial groups, including those that indicate hygienic failures during production and may cause spoilage, or even microorganisms that pose risks to consumers' health. A systematic review of the literature published from January 1996 to November 2020 was carried out to identify scientific data about production characteristics and microbiological aspects of BAC, with a major focus on quality and safety status of these traditional products. Studies that fulfilled the inclusion criteria indicated that artisanal chesses produced in Brazil still do not satisfactorily meet the microbiological criteria established by the national laws, mainly due to the high counts of coagulase-positive Staphylococcus and coliforms. Despite low prevalence, pathogens such as Salmonella and Listeria monocytogenes were isolated in some BAC. This review contributed to better understanding microbiological aspects of BAC, the data compiled by the authors highlight the need to improve hygiene practices along the production chain of these traditional cheeses.

Nanoencapsulated Essential Oils with Enhanced Antifungal Activity for Potential Application on Agri-Food, Material and Environmental Fields

Nanotechnology is a new frontier of this century that finds applications in various fields of science with important effects on our life and on the environment. Nanoencapsulation of bioactive compounds is a promising topic of nanotechnology. The excessive use of synthetic compounds with antifungal activity has led to the selection of resistant fungal species. In this context, the use of plant essential oils (EOs) with antifungal activity encapsulated in ecofriendly nanosystems could be a new and winning strategy to overcome the problem. We prepared nanoencapsules containing the essential oils of Origanum vulgare (OV) and Thymus capitatus (TC) by the nanoprecipitation method. The colloidal suspensions were characterized for size, polydispersity index (PDI), zeta potential, efficiency of encapsulation (EE) and loading capacity (LC). Finally, the essential oil nanosuspensions were assayed against a panel of fourteen fungal strains belonging to the Ascomycota and Basidiomycota phyla. Our results show that the nanosystems containing thyme and oregano essential oils were active against various fungal strains from natural environments and materials. In particular, the minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) values were two to four times lower than the pure essential oils. The aqueous, ecofriendly essential oil nanosuspensions with broad-spectrum antifungal activity could be a valid alternative to synthetic products, finding interesting applications in the agri-food and environmental fields.

Fermentative Foods: Microbiology, Biochemistry, Potential Human Health Benefits and Public Health Issues

Fermented foods identify cultures and civilizations. History, climate and the particulars of local production of raw materials have urged humanity to exploit various pathways of fermentation to produce a wide variety of traditional edible products which represent adaptations to specific conditions. Nowadays, industrial-scale production has flooded the markets with ferments. According to recent estimates, the current size of the global market of fermented foods is in the vicinity of USD 30 billion, with increasing trends. Modern challenges include tailor-made fermented foods for people with special dietary needs, such as patients suffering from Crohn's disease or other ailments. Another major challenge concerns the safety of artisan fermented products, an issue that could be tackled with the aid of molecular biology and concerns not only the presence of pathogens but also the foodborne microbial resistance. The basis of all these is, of course, the microbiome, an aggregation of different species of bacteria and yeasts that thrives on the carbohydrates of the raw materials. In this review, the microbiology of fermented foods is discussed with a special reference to groups of products and to specific products indicative of the diversity that a fermentation process can take. Their impact is also discussed with emphasis on health and oral health status. From Hippocrates until modern approaches to disease therapy, diet was thought to be of the most important factors for health stability of the human natural microbiome. After all, to quote Pasteur, "Gentlemen, the microbes will have the last word for human health." In that sense, it is the microbiomes of fermented foods that will acquire a leading role in future nutrition and therapeutics.

Biotechnological approaches for the production of designer cheese with improved functionality

Cheese is a product of ancient biotechnological practices, which has been revolutionized as a functional food product in many parts of the world. Bioactive compounds, such as peptides, polysaccharides, and fatty acids, have been identified in traditional cheese products, which demonstrate functional properties such as antihypertensive, antioxidant, immunomodulation, antidiabetic, and anticancer activities. Besides, cheese-making probiotic lactic acid bacteria (LAB) exert a positive impact on gut health, aiding in digestion, and improved nutrient absorption. Advancement in biotechnological research revealed the potential of metabolite production with prebiotics and bioactive functions in several strains of LAB, yeast, and filamentous fungi. The application of specific biocatalyst producing microbial strains enhances nutraceutical value, resulting in designer cheese products with multifarious health beneficial effects. This review summarizes the biotechnological approaches applied in designing cheese products with improved functional properties.

Domestication of the Emblematic White Cheese-Making Fungus Penicillium camemberti and Its Diversification into Two Varieties

Domestication involves recent adaptation under strong human selection and rapid diversification and therefore constitutes a good model for studies of these processes. We studied the domestication of the emblematic white mold Penicillium camemberti, used for the maturation of soft cheeses, such as Camembert and Brie, about which surprisingly little was known, despite its economic and cultural importance. Whole-genome-based analyses of genetic relationships and diversity revealed that an ancient domestication event led to the emergence of the gray-green P. biforme mold used in cheese making, by divergence from the blue-green wild P. fuscoglaucum fungus. Another much more recent domestication event led to the generation of the P. camemberti clonal lineage as a sister group to P. biforme. Penicillium biforme displayed signs of phenotypic adaptation to cheese making relative to P. fuscoglaucum, in terms of whiter color, faster growth on cheese medium under cave conditions, lower amounts of toxin production, and greater ability to prevent the growth of other fungi. The P. camemberti lineage displayed even stronger signs of domestication for all these phenotypic features. We also identified two differentiated P. camemberti varieties, apparently associated with different kinds of cheeses and with contrasted phenotypic features in terms of color, growth, toxin production, and competitive ability. We have thus identified footprints of domestication in these fungi, with genetic differentiation between cheese and wild populations, bottlenecks, and specific phenotypic traits beneficial for cheese making. This study has not only fundamental implications for our understanding of domestication but can also have important effects on cheese making.

Characterisation of fungal contamination sources for use in quality management of cheese production farms in Korea

OBJECTIVE

This study was conducted to determine the composition and diversity of the fungal flora at various control points in cheese ripening rooms of 10 dairy farms from six different provinces in the Republic of Korea.

METHODS

Floor, wall, cheese board, room air, cheese rind and core were sampled from cheese ripening rooms of ten different dairy farms. The molds were enumerated using YM petrifilm, while isolation was done on yeast extract glucose chloramphenicol agar plates. Morphologically distinct isolates were identified using sequencing of internal transcribed spacer region.

RESULTS

The fungal counts in 8 out of 10 dairy farms were out of acceptable range, as per hazard analysis critical control point regulation. A total of 986 fungal isolates identified and assigned to the phyla Ascomycota (14 genera) and Basidiomycota (3 genera). Of these Penicillium, Aspergillus, and Cladosporium were the most diverse and predominant. The cheese ripening rooms was overrepresented in 9 farms by Penicillium (76%), while Aspergillusin a single farm. Among 39 species, the prominent members were Penicillium commune, P. oxalicum, P. echinulatum, and Aspergillus versicolor. Most of the mold species detected on surfaces were the same found in the indoor air of cheese ripening rooms.

CONCLUSION

The environment of cheese ripening rooms persuades a favourable niche for mold growth. The fungal diversity in the dairy farms were greatly influenced by several factors (exterior atmosphere, working personnel etc.,) and their proportion varied from one to another. Proper management of hygienic and production practices and air filtration system would be effective to eradicate contamination in cheese processing industries.

Aflatoxins: Producing-Molds, Structure, Health Issues and Incidence in Southeast Asian and Sub-Saharan African Countries

This review aims to update the main aspects of aflatoxin production, occurrence and incidence in selected countries, and associated aflatoxicosis outbreaks. Means to reduce aflatoxin incidence in crops were also presented, with an emphasis on the environmentally-friendly technology using atoxigenic strains of Aspergillus flavus. Aflatoxins are unavoidable widespread natural contaminants of foods and feeds with serious impacts on health, agricultural and livestock productivity, and food safety. They are secondary metabolites produced by Aspergillus species distributed on three main sections of the genus (section Flavi, section Ochraceorosei, and section Nidulantes). Poor economic status of a country exacerbates the risk and the extent of crop contamination due to faulty storage conditions that are usually suitable for mold growth and mycotoxin production: temperature of 22 to 29 °C and water activity of 0.90 to 0.99. This situation paralleled the prevalence of high liver cancer and the occasional acute aflatoxicosis episodes that have been associated with these regions. Risk assessment studies revealed that Southeast Asian (SEA) and Sub-Saharan African (SSA) countries remain at high risk and that, apart from the regulatory standards revision to be more restrictive, other actions to prevent or decontaminate crops are to be taken for adequate public health protection. Indeed, a review of publications on the incidence of aflatoxins in selected foods and feeds from countries whose crops are classically known for their highest contamination with aflatoxins, reveals that despite the intensive efforts made to reduce such an incidence, there has been no clear tendency, with the possible exception of South Africa, towards sustained improvements. Nonetheless, a global risk assessment of the new situation regarding crop contamination with aflatoxins by international organizations with the required expertise is suggested to appraise where we stand presently.

Detection Methods for Aflatoxin M1 in Dairy Products

Mycotoxins are toxic compounds produced mainly by fungi of the genera Aspergillus, Fusarium and Penicillium. In the food chain, the original mycotoxin may be transformed in other toxic compounds, reaching the consumer. A good example is the occurrence of aflatoxin M1 (AFM1) in dairy products, which is due to the presence of aflatoxin B1 (AFB1) in the animal feed. Thus, milk-based foods, such as cheese and yogurts, may be contaminated with this toxin, which, although less toxic than AFB1, also exhibits hepatotoxic and carcinogenic effects and is relatively stable during pasteurization, storage and processing. For this reason, the establishment of allowed maximum limits in dairy products and the development of methodologies for its detection and quantification are of extreme importance. There are several methods for the detection of AFM1 in dairy products. Usually, the analytical procedures go through the following stages: sampling, extraction, clean-up, determination and quantification. For the extraction stage, the use of organic solvents (as acetonitrile and methanol) is still the most common, but recent advances include the use of the Quick, Easy, Cheap, Effective, Rugged, and Safe method (QuEChERS) and proteolytic enzymes, which have been demonstrated to be good alternatives. For the clean-up stage, the high selectivity of immunoaffinity columns is still a good option, but alternative and cheaper techniques are becoming more competitive. Regarding quantification of the toxin, screening strategies include the use of the enzyme-linked immunosorbent assay (ELISA) to select presumptive positive samples from a wider range of samples, and more reliable methods-high performance liquid chromatography with fluorescence detection or mass spectroscopy-for the separation, identification and quantification of the toxin.

The Occurrence and Dietary Exposure Assessment of Mycotoxins, Biogenic Amines, and Heavy Metals in Mould-Ripened Blue Cheeses

The occurrence and dietary exposure assessment of 16 mycotoxins, 6 biogenic amines (BAs), and 13 metallic elements in blue-veined cheeses (n = 46) is reported. Co-occurrence of mycophenolic acid (≤599 µg·kg-1) with roquefortine C (≤5454 µg·kg-1) was observed in 63% of the tested cheeses, while BAs were frequently present at concentrations between 0.2 and 717 mg kg-1. The concentrations of heavy metals in cheeses were very low. Chronic/acute exposure assessment based on consumption data from different European populations indicated that the levels of mycotoxins and heavy metals are safe to consumers, whereas, rather high hazard indexes (HI up to 0.77) were determined for BAs according to the worst-case scenario based on high consumption and 95th percentile occurrence. A more detailed acute dietary intake study indicated that histamine and tyramine were predominant among these BAs, reaching 27 and 41% of the acute oral intake reference doses.

Toxicological and Medical Aspects of Aspergillus-Derived Mycotoxins Entering the Feed and Food Chain

Due to Earth's changing climate, the ongoing and foreseeable spreading of mycotoxigenic Aspergillus species has increased the possibility of mycotoxin contamination in the feed and food production chain. These harmful mycotoxins have aroused serious health and economic problems since their first appearance. The most potent Aspergillus-derived mycotoxins include aflatoxins, ochratoxins, gliotoxin, fumonisins, sterigmatocystin, and patulin. Some of them can be found in dairy products, mainly in milk and cheese, as well as in fresh and especially in dried fruits and vegetables, in nut products, typically in groundnuts, in oil seeds, in coffee beans, in different grain products, like rice, wheat, barley, rye, and frequently in maize and, furthermore, even in the liver of livestock fed by mycotoxin-contaminated forage. Though the mycotoxins present in the feed and food chain are well documented, the human physiological effects of mycotoxin exposure are not yet fully understood. It is known that mycotoxins have nephrotoxic, genotoxic, teratogenic, carcinogenic, and cytotoxic properties and, as a consequence, these toxins may cause liver carcinomas, renal dysfunctions, and also immunosuppressed states. The deleterious physiological effects of mycotoxins on humans are still a first-priority question. In food production and also in the case of acute and chronic poisoning, there are possibilities to set suitable food safety measures into operation to minimize the effects of mycotoxin contaminations. On the other hand, preventive actions are always better, due to the multivariate nature of mycotoxin exposures. In this review, the occurrence and toxicological features of major Aspergillus-derived mycotoxins are summarized and, furthermore, the possibilities of treatments in the medical practice to heal the deleterious consequences of acute and/or chronic exposures are presented.