Using Cellulose Nanofibers and Its Palm Oil Pickering Emulsion as Fat Substitutes in Emulsified Sausage

Replacing the animal fat in Bologna sausages using high internal phase emulsion stabilized with lentil protein isolate (Lens culinaris)

High internal phase emulsions (HIPEs) are promising techniques that can replace saturated fat in food without reducing the product's texture, sensory attributes, water-holding capacity, and cooking loss. In the current investigation, 100% pork back fat was replaced by HIPEs formed with lentil protein isolate (LPI) in Bologna sausages. HIPEs were prepared by 25% LPI dispersion (2, 4, 6, and 8%, w/w) and 75% (w/w) soybean oil. HIPEs with higher LPI concentration (4, 6, and 8%, w/w) showed lower droplet size, firmer appearance, and better rheology behavior than 2% LPI. The concentrations LPI (2%, 4%, 6%, and 8%, w/w) led to increased moisture in sausages (FH2, FH4, FH6, and FH8, respectively) compared to the FC. These LPI levels resulted in sausage values for pressed juice similar to the FC and lower energy values than sausages with soybean oil (FO) and pork back fat (FC). Besides, these LPI concentrations (4%, 6%, and 8%, w/w) resulted in a lower oil oxidation level in sausages with HIPEs (FH4, FH6, and FH8, respectively) compared to the control sausage formulation with pork back fat (FC). Bologna sausages elaborated with HIPEs showed emulsion stability values higher than 97%, without significance difference between them. The texture and sensory properties of sausages made with HIPEs were comparable to those made with pork back fat. HIPEs may improve the oxidation stability of the Bologna sausages. These results highlight the effectiveness of HIPEs structured with lentil protein in successfully substituting pork back fat in Bologna sausages with a better nutritional appeal.

Diversified Techniques for Restructuring Meat Protein-Derived Products and Analogues

Accompanied by the rapid growth of the global population and increasing public awareness of protein-rich foods, the market demand for protein-derived products is booming. Utilizing available technologies to make full use of meat by-products, such as scraps, trimmings, etc., to produce restructured meat products and explore emerging proteins to produce meat analogues can be conducive to alleviating the pressure on supply ends of the market. The present review summarizes diversified techniques (such as high-pressure processing, ultrasonic treatment, edible polysaccharides modification, enzymatic restructuring, etc.) that have been involved in restructuring meat protein-derived products as well as preparing meat analogues identified so far and classifying them into three main categories (physical, chemical and enzymatic). The target systems, processing conditions, effects, advantages, etc., of the included techniques, are comprehensively and systemically summarized and discussed, and their existing problems or developing trends are also briefly prospected. It can be concluded that a better quality of restructured products can be obtained by the combination of different restructuring technologies. This review provides a valuable reference both for the research and industrial production of restructured meat protein-derived products and analogues.

Study of the effect of canola proteins-xanthan based Pickering emulsion as animal fat replacer in a food matrix produced from mechanically separated meat

Pickering emulsions stabilized by protein microgel, and hydrocolloid have shown desirable properties to be used as animal fat replacers. However, the potential applications of these structures as animal fat replacers in meat systems formulations have not been explored yet. Therefore, novel Pickering emulsions stabilized by canola proteins microgels and xanthan gum were developed, and their potential as animal fat replacer in meat systems was assessed for the first time. In the present study, 25, 50, 75, and 100% animal fat content were replaced by Pickering emulsion. Moreover, the obtained results revealed that complete fat replacement with canola proteins-based Pickering emulsion in meat emulsion improved its nutritional value by significantly enhancing the percentage of protein, monounsaturated and polyunsaturated fatty acid composition, and reduction of saturated fatty acid content compared to control (100% animal fat). Reformulation with PEs enhanced the meat systems' technological behavior such as emulsion stability and cooking loss, and oxidative stability. Also, significant total color difference (ΔE *) was observed only in samples with 100% fat replacement. Meat systems containing fat replacement ≤50% showed the closest texture parameters to the control sample. This study provides a promising alternative to replace animal fat with plant-based ingredients in meat systems.

Improved antioxidant properties of pork patties by replacing fat with resveratrol-loaded MP-CS complex stabilized pickering emulsion

The characterization and antioxidant ability of Res-loaded MP-CS stabilized Pickering emulsion, and its effects of fat reduction (25%, 50%, 75%, and 100%) in meat patties on pH, color, texture, cooking yield and antioxidant activity were investigated. Fat substitute using emulsion had no significant effect on pH and cooking yield. The addition of emulsion increased L* value and reduced a* value. a* value of meat patties with resveratrol added were higher than those without resveratrol group. Hardness and chewiness of meat patties with 25% and 100% fat replacement was lower than 50% and 75% fat replacement. The addition of emulsion could improve the network structure of meat patties and enhance oxidative stability. Oxidative stability of meat patties was improved by Res-loaded MP-CS stabilized Pickering emulsion. The results showed that MP-CS stabilized Pickering emulsion had great potential to be used as fat substitute for developing low-fat meat products, and the addition of resveratrol can improve the antioxidant ability of substitute fat meat products.

Plant-based meat analogs and fat substitutes, structuring technology and protein digestion: A review

There is currently an increasing trend in the consumption of meat analogs and fat substitutes due to the health hazards by excessive consumption of meat. Simulating the texture and mouthfeel of meat through structured plant-derived polymers has become a popular processing method. In this review, the mechanical structuring technology of plant polymers for completely replacing real meat is mainly introduced in this review, which mainly focuses on the parameters and principles of mechanical equipment for the production of vegan meat. The difference in composition between plant meat and real meat is mainly reflected in the protein, and particular attention should be paid to the digestive characteristics of plant meat protein in the gastrointestinal tract. Therefore, the differences in the protein digestibility properties of meat analogs and real meat is discussed in this review, focusing primarily on protein digestibility and peptide/amino acid composition of mechanically structured vegan meats. In terms of fat substitutes for meat products, the types of plant polymer colloidal systems used for meat fat substitutes is comprehensively introduced, including emulsion, hydrogel and oleogel.

Nanocellulose-stabilized Pickering emulsions: Fabrication, stabilization, and food applications

Pickering emulsions have been widely studied due to their good stability and potential applications. Nanocellulose including cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and bacterial cellulose nanofibrils (BCNFs) has emerged as sustainable stabilizers/emulsifiers in food-related Pickering emulsions due to their favorable properties such as renewability, low toxicity, amphiphilicity, biocompatibility, and high aspect ratio. Nanocellulose can be widely obtained from different sources and extraction methods and can effectively stabilize Pickering emulsions via the irreversible adsorption onto oil-water interface. The synergistic effects of nanocellulose and other substances can further enhance the interfacial networks. The nanocellulose-based Pickering emulsions have potential food-related applications in delivery systems, food packaging materials, and fat substitutes. Nanocellulose-based Pickering emulsions as 3D printing inks exhibit good injectable and gelling properties and are promising to print spatial architectures. In the future, the utilization of biomass waste and the development of "green" and facile extraction methods for nanocellulose production deserve more attention. The stability of nanocellulose-based Pickering emulsions in multi-component food systems and at various conditions is an utmost challenge. Moreover, the case-by-case studies on the potential safety issues of nanocellulose-based Pickering emulsions need to be carried out with the standardized assessment procedures. In this review, we highlight key fundamental work and recent reports on nanocellulose-based Pickering emulsion systems. The sources and extraction of nanocellulose and the fabrication of nanocellulose-based Pickering emulsions are briefly summarized. Furthermore, the synergistic stability and food-related applications of nanocellulose-stabilized Pickering emulsions are spotlighted.

Chitosan-based Pickering emulsion: A comprehensive review on their stabilizers, bioavailability, applications and regulations

BACKGROUND

Chitosan-based particles are one of the most promising Pickering emulsions stabilizers due to its cationic properties, cost-effective, biocompatibility, biodegradability. However, there are currently no comprehensive reviews analyzing the role of chitosan to develop Pickering emulsions, and the bioavailability and multiple uses of these emulsions.

SCOPE AND APPROACH

This review firstly summarizes the types, preparation and functional properties of chitosan-based Pickering emulsion stabilizers, followed by in vivo and in vitro bioavailability, main regulations, and future application and trends.

KEY FINDINGS AND CONCLUSIONS

Stabilizers used in chitosan-based Pickering emulsions include 6 categories: chitosan self-aggregating particles and 5 types of composites (chitosan-protein, chitosan-polysaccharide, chitosan-fatty acid, chitosan-polyphenol, and chitosan-inorganic). Chitosan-based Pickering emulsions improved the bioavailability of different compounds compared to traditional emulsions. Current applications include hydrogels, microcapsules, food ingredients, bio-based films, cosmeceuticals, porous scaffolds, environmental protection agents, and interfacial catalysis systems. However, due to current limitations, more research and development are needed to be extensively explored to meet consumer demand, industrial manufacturing, and regulatory requirements. Thus, optimization of stabilizers, bioavailability studies, 3D4D printing, fat substitutes, and double emulsions are the main potential development trends or research gaps in the field which would contribute to increase adoption of these promising emulsions at industrial level.

Pickering emulsion stabilized by modified pea protein-chitosan composite particles as a new fat substitute improves the quality of pork sausages

Pickering emulsion is a potential substitute for animal fat due to high stability and solid-like properties. Therefore, the effect of replacing 25%-100% pork backfat with Pickering emulsion (75% corn oil volume fraction) stabilized by modified pea protein-chitosan composite particles on the quality of sausages was studied. All meat pastes exhibited a strong gel-like rheological character (G' > G"). The incorporation of Pickering emulsion in sausages enhanced the textural properties (hardness, springiness, chewiness, cohesiveness and resilience) and the uniformity and compactness of micromorphology, as well as suppressed the cooking loss and TBARS content. In particular, the sausages with a backfat substitution ratio of 100%, showing a similar overall sensory acceptability to the backfat sausage, revealed the best rheological properties, texture properties and micromorphology and the lowest cooking loss and fat oxidation (P < 0.05). The results showed that Pickering emulsion stabilized by modified pea protein-chitosan composite particles is a potential fat substitute for meat products with the desirable characteristics.

Six weeks effect of different nanocellulose on blood lipid level and small intestinal morphology in mice

AIMS

Cellulose nanofibrils (CNF, or NFC), cellulose nanocrystals (CNC, or NCC), and Tempo (2,2,6,6-tetramethylpiperidine-1-oxyl radical) oxidized CNF (Tempo-CNF) were compared for the short-term effect on mice fed with a high-fat and high-sugar (Western diet, WD) to investigate their effect when combined with a sub-optimal diet.

SCOPE

Thirty C57B/C female mice (10 weeks old; 5-6 mice/group) were given water, cellulose, or three types of nanocellulose once daily in a dose of 30 mg/kg body weight by oral gavage. After six weeks, weight changes, fecal output, glucose homeostasis, and gut permeability showed no significant among groups. Serum analysis including triglycerides, cholesterol and total bile acids and small intestinal morphology including villus length, villus width, crypt depth, goblet cell count and goblet cell density were no difference for all groups. Only CNC group had higher excretion of bile acids in the feces.

CONCLUSIONS

These results suggest that current treated dose using three types of nanocellulose had no detrimental effects on blood lipid level and small intestinal morphology.

Effect of Palm-Based Shortenings of Various Melting Ranges as Animal Fat Replacers on the Physicochemical Properties and Emulsion Stability of Chicken Meat Emulsion

This study evaluated the effects of palm shortenings (PS) with varying melting ranges (MR) on the physicochemical, emulsion stability, rheological, thermal, textural, and microtextural properties of chicken meat emulsions. Six emulsions were developed: control (chicken skin), sample A (PS at MR of 33-36 °C), sample B (PS at MR of 38-42 °C), sample C (PS at MR of 44-46 °C), sample D (PS at MR of 45-49 °C), and sample E (PS at MR of 55-60 °C). There were no significant differences in cooking loss, pH, and water-holding capacity between the meat emulsions, with sample E providing a more stable emulsion with the lowest fat content and highest moisture content. The colour profiles and protein thermal stabilities of the fat-replaced meat emulsions were not significantly different from the control. The hardness, shear force, storage, and loss moduli increased when palm shortenings with higher melting range were used, with sample E having the highest values. Sample E also exhibited a smaller pore size and more compact structure, and thus was well-emulsified compared to the other samples. Overall, palm shortenings-particularly those with a melting range of 55-60 °C-have the potential to replace chicken skin in meat emulsions.

Effects of Concentration of Soybean Protein Isolate and Maltose and Oil Phase Volume Fraction on Freeze-Thaw Stability of Pickering Emulsion

There is growing interest in enhancing the freeze-thaw stability of a Pickering emulsion to obtain a better taste in the frozen food field. A Pickering emulsion was prepared using a two-step homogenization method with soybean protein and maltose as raw materials. The outcomes showed that the freeze-thaw stability of the Pickering emulsion increased when prepared with an increase in soybean protein isolate (SPI) and maltose concentration. After three freeze-thaw treatments at 35 mg/mL, the Turbiscan Stability Index (TSI) value of the emulsion was the lowest. At this concentration, the surface hydrophobicity (H₀) of the composite particles was 33.6 and the interfacial tension was 44.34 mN/m. Furthermore, the rheological nature of the emulsions proved that the apparent viscosity and viscoelasticity of Pickering emulsions grew with a growing oil phase volume fraction and concentration. The maximum value was reached in the case of the oil phase volume fraction of 50% at a concentration of 35 mg/mL, the apparent viscosity was 18 Pa·s, the storage modulus of the emulsion was 575 Pa, and the loss modulus was 152 Pa. This research is significant for the production of freeze-thaw resistant products, and improvement of protein-stabilized emulsion products with high freeze-thaw stability.

Balancing functional and health benefits of food products formulated with palm oil as oil sources

Palm oil (PO) is widely utilised in the food industry and consumed in large quantities by humans. Owing to its bioactive components, such as fatty acids, carotenoids, vitamin E, and phenolic compounds, PO has been utilised for generations. However, public concern about their adverse effects on human health is growing. A literature search was conducted to identify fractionated palm oil processing techniques, proof of their health advantages, and potential food applications. Refined palm oil (RPO) is made from crude palm oil (CPO) and can be fractionated into palm olein (POl) and palm stearin (PS). Fractional crystallisation, dry fractionation, and solvent fractionation are the three basic fractionation procedures used in the PO industry. The composition of triacylglycerols and fatty acids in refined and fractionated palm oil and other vegetable oils is compared to elucidate the triacylglycerols and fatty acids that may be important in product development. It is well proven that RPO, POl, and PS extends the oil's shelf life in the food business. These oils have a more significant saturated fat content and antioxidant compounds than some vegetable oils, such as olive and coconut oils, making them more stable. Palm olein and stearin are also superior shortening agents and frying mediums for baking goods and meals. Furthermore, when ingested modestly daily, palm oils, especially RPO and POl, provide health benefits such as cardioprotective, antidiabetic, anti-inflammatory, and antithrombotic effects. Opportunities exist for fractionated palm oil to become a fat substitute; however, nutrition aspects need to be considered in further developing the market.

Main animal fat replacers for the manufacture of healthy processed meat products

The technological, sensory, and nutritional characteristics of meat products are directly related to their animal fat content. Adding animal fat to meat products significantly influences their sensory properties, such as color, taste, and aroma. In addition, the physicochemical properties of fat decisively contribute to the texture of meat products, playing a fundamental role in improving the properties of viscosity, creaminess, chewiness, cohesiveness, and hardness. However, meat products' high animal fat content makes them detrimental to a healthy diet. Therefore, reducing the fat content of meat products is an urgent need, but it is a challenge for researchers and the meat industry. The fat reduction in meat products without compromising the product's quality and with minor impacts on the production costs is not a simple task. Thus, strategies to reduce the fat content of meat products should be studied with caution. During the last decades, several fat replacers were tested, but among all of them, the use of flours and fibers, hydrocolloids, mushrooms, and some animal proteins (such as whey and collagen) presented promising results. Additionally, multiple strategies to gel oils of vegetable origin are also a current topic of study, and these have certain advantages such as their appearance (attempts to imitate animal fat), while also improving the nutritional profile of the lipid fraction of the products meat. However, each of these fat substitutes has both advantages and limitations in their use, which will be discussed in subsequent sections. Therefore, due to the growing interest in this issue, this review focuses on the main substitutes for animal fat used in the production of meat products, offering detailed and updated information on the latest discoveries and advances in this area.

The Potential Application of Pickering Multiple Emulsions in Food

Emulsions stabilized by adsorbed particles—Pickering particles (PPs) instead of surfactants and emulsifiers are called Pickering emulsions. Here, we review the possible uses of Pickering multiple emulsions (PMEs) in the food industry. Food-grade PMEs are very complex systems with high potential for application in food technology. They can be prepared by traditional two-step emulsification processes but also using complex techniques, e.g., microfluidic devices. Compared to those stabilized with an emulsifier, PMEs provide more benefits such as lower susceptibility to coalescence, possible encapsulation of functional compounds in PMEs or even PPs with controlled release, etc. Additionally, the PPs can be made from food-grade by-products. Naturally, w/o/w emulsions in the Pickering form can also provide benefits such as fat reduction by partial replacement of fat phase with internal water phase and encapsulation of sensitive compounds in the internal water phase. A possible advanced type of PMEs may be stabilized by Janus particles, which can change their physicochemical properties and control properties of the whole emulsion systems. These emulsions have big potential as biosensors. In this paper, recent advances in the application of PPs in food emulsions are highlighted with emphasis on the potential application in food-grade PMEs.

Myofibrillar protein composite gels: effect of esterified potato starch, lard and peanut oil on the gel properties

BACKGROUND

Heat-induced composite gels were prepared with 20 g kg^-1 myofibrillar protein (MP) sol, 20 g kg^-1 modified starch and 100 g kg^-1 lipid pre-emulsified by MP in 0.6 mol L^-1 NaCl, at pH 6.2. The effects of esterified potato starch (EPS) and emulsified lipid (lard or peanut oil) on the rheology, texture properties and nuclear magnetic resonance characterization of MP gel were evaluated.

RESULTS

The addition of starch and lipid significantly improved the gel strength and water holding capacity (WHC) of the MP gel. Analysis of the relaxation time compared with the WHC tests showed that the variation range of the transverse T₂₂ relaxation time of a gel was positively proportional to changes in WHC of the composite gel, and the lower the T₂₂ relaxation time, the better the WHC of composite gel. Moreover, MP gel with starch and emulsified lard added at the same time has the lowest T₂ relaxation time, and also the best WHC of the gel. Environmental scanning electron microscopy showed that emulsified oil droplets embedded the gaps in the protein network, and the gelatinized starch contributed to restrict the oil droplet size, resulting in thicker MP gel.

CONCLUSION

Emulsified lipid and modified starch have an important influence on the rheology and microstructure of MP gels, indicating the subtle interaction between starch, lipid and protein. The results suggest the potential feasibility of modified starch and vegetable oil to improve the textural properties in comminuted meat products. © 2021 Society of Chemical Industry.

The Effects of Adding a Gel-Alike Curcuma longa L. Suspension as Color Agent on Some Quality and Sensory Properties of Yogurt

Color is an important characteristic of food products. This characteristic is related to consumer acceptability. To use the entire rhizome of Curcuma longa (CL) as a food colorant, a novel gel alike stable suspension (CLS) was previously developed using cellulose nanofibers (CNFs). Therefore, the present study was conducted to evaluate the CLS as a color additive on a stirred yogurt. Three concentrations of CLS were studied (0.1, 0.125, and 0.15 wt. %) and compared to yogurt without CLS. The obtained yogurts were characterized through the determination of pH, titratable acidity, syneresis, color and curcumin content after 1, 7, 14, and 21 days of storage. Additionally, rheological and sensory measurements were performed on the samples after one day of storage. Results show that the addition of CLS does not affect the pH and titratable acidity of the samples, but all the yogurts showed an increase in their syneresis during the storage time, showing a breakdown of the gel structure. Furthermore, the CLS suspension has the ability to impart a yellow color to yogurts, a characteristic that was stable during storage. Finally, the addition of 1 wt. % or 1.25 wt. % of CLS allows the development of a yogurt with adequate sensory perception.

Advances in nanotechnology and the benefits of using cellulose nanofibers in animal nutrition

The production of cellulose nanofibers promotes the utilization of plant residues that are generated in agro-industries during food processing. The utilization of these plant by-products reduces environmental contamination. Cellulose nanofibers are used in several sectors, including the drug, food, and animal nutrition industries. Many sources of nanofibers used in animal diets can be used as potential fiber substitutes after being processed to improve efficiency. For instance, including nanometric particles of plant fibers (<100 nm) in animal feed may provide excellent physical properties such as high reactivity, a large surface area, and improved nutrient absorption from the diet. Nanotechnology improves the characteristics of fibers that are important for gastrointestinal transit and their utilization as energy sources and substrates for microbial fermentation in the digestive tract of animals. Nanofibers can improve the synthesis of volatile fatty acids and the blood lipid profile, with positive effects on the intestinal health of animals. Moreover, in vitro and in vivo studies have demonstrated promising effects in reducing blood glucose levels without toxic effects on the body. Supplying nanofibers in the diet improve animal performance, increase productivity, and work toward a more sustainable economic development of agribusinesses. The quality of animal products such as meat, milk, and eggs is also reported to be improved with the inclusion of nanominerals in the feed. Overall, the application of nanotechnology to harness the by-products of agro-industries can increase economic viability and sustainability in animal production systems. Therefore, this review presents a current survey on the main research and advances in the utilization of nanotechnology, focusing on cellulose nanofibers in animal feed to improve animal performance.

Influence of a Non-Ionic Surfactant in the Microstructure and Rheology of a Pickering Emulsion Stabilized by Cellulose Nanofibrils

Emulsion stabilization is a broad and relevant field with applications in oil, polymer and food industries. In recent years, the use of solid particles to stabilize emulsions or Pickering emulsions have been studied for their kinetic and physical properties. Nanomaterials derived from natural sources are an interesting alternative for this application. Cellulose nanofibrils (CNFs) have been widely explored as a Pickering emulsifier with potential food applications, however, in some cases the presence of surfactants is unavoidable, and the literature is devoid of an evaluation of the effect of a non-ionic food-grade surfactant, such as polysorbate 80, in the stabilization of a vegetable oil by CNFs. To better assess the possible interactions between CNFs and this surfactant emulsions containing coconut oil, an emerging and broadly used oil, were processed with and without polysorbate 80 and evaluated in their qualitative stability, morphological and physical properties. Fluorescence microscopy, dynamic light scattering and rheology were used for this assessment. Results indicate in absence of the surfactant, emulsion stability increased at higher CNFs content, creaming was observed at 0.15 and 0.3 wt.% of CNFs, while it was not evidenced when 0.7 wt.% was used. After the addition of surfactant, the droplets are covered by the surfactant, resulting in particles with a smaller diameter, entrapped in the cellulosic structure. Rheology indicates a lower network stiffness after adding polysorbate 80.

Cinnamon Essential Oil Nanocellulose-Based Pickering Emulsions: Processing Parameters Effect on Their Formation, Stabilization, and Antimicrobial Activity

This work aimed to prepare nanocellulose-based Pickering emulsions using cinnamon essential oil. Different formulations were investigated by varying the preparation time, homogenization speed, oil and nanocellulose concentration, and morphology. The emulsions were first characterized by droplet size, morphologies, and storage stability. The Design of Experiments (DoE) was used to evaluate the parameter’s effects on the emulsions’ stability, and the emulsions with optimum particle size and stability were evaluated by antimicrobial activity. The more stable emulsions required higher energy in the system to obtain efficient emulsification. The cellulose nanocrystal (CNC) emulsions showed a 30% oil volume as a constant to obtain a low creaming index (34.4% and 42.8%) and zeta potential values around −29 mV, indicating an electrostatic stabilization. The cellulose nanofiber (CNF) emulsions showed 100% stability after a month using a 20% oil volume as a constant and Zeta potential values around −15 mV, indicating a steric stabilization. CNF-emulsions’ inhibition halos for Bacilus subtilis were 30.1 ± 3.7% smaller than those found in CNC-emulsions (65 ± 2.9 mm), while Pseudomonasaeruginosas almost do not present differences in the inhibition halos. These results suggest that the nanocellulose morphology may promote a regulation on the EO migration to the medium, as well that this migration ratio does not affect the bacteria.

Strategies to Increase the Biological and Biotechnological Value of Polysaccharides from Agricultural Waste for Application in Healthy Nutrition

Nowadays, there is a growing interest in the extraction and identification of new high added-value compounds from the agro-food industry that will valorize the great amount of by-products generated. Many of these bioactive compounds have shown beneficial effects for humans in terms of disease prevention, but they are also of great interest in the food industry due to their effect of extending the shelf life of foods by their well-known antioxidant and antimicrobial activity. For this reason, an additional research objective is to establish the best conditions for obtaining these compounds from complex by-product structures without altering their activity or even increasing it. This review highlights recent work on the identification and characterization of bioactive compounds from vegetable by-products, their functional activity, new methodologies for the extraction of bioactive compounds from vegetables, possibly increasing their biological activity, and the future of the global functional food and nutraceuticals market.

Rice bran oil emulgel as a pork back fat alternate for semi-dried fish sausage

The objective of this study was to investigate the effects of rice bran oil emulsion filled gels (EG) substitution for pork back fat on the characteristics of Chinese style semi-dried tilapia sausage (CFS). EG prepared using different gelling agents and processing conditions were used as pork back fat alternate in the CFS. From the results, physical, chemical and microstructural qualities of CFS were governed by the type of EG incorporated. Regarding the overall quality, CFS formulated with carrageenan-EG was classified as an optimal formula. CFS added with carrageenan-EG showed a superior oxidative stability, color preservation, and water holding capacity compared to the control during vacuum packaged storage at room temperature for 20 days. Thiobarbituric acid reactive substances (TBARS) and microbial quality of both formulae remained in the acceptable level (TBARS < 1 mg/kg and total plate count < 4 log CFU/g) throughout the storage. Therefore, the carrageenan based EG substitution for pork back fat is a promising avenue for the production of the CFS where a high saturated animal fat was substituted by vegetable oil.

A novel cholesterol-free mayonnaise made from Pickering emulsion stabilized by apple pomace particles

Yolk-based mayonnaise is widely used to enhance the flavor of daily food. In view of health concerns on dietary cholesterol, novel mayonnaises (NMs) were made from Pickering emulsions stabilized by apple pomace particles using micro-jet (MJ-NM), ultrasonic (US-NM), and high-speed-shear homogenizer (HSS-NM), respectively. NMs and commercial mayonnaise (CM) were comparatively investigated in appearance, droplet size, rheological, tribological, and stability properties. NMs presented almost identical appearances to CM except for color. The droplets' size in NMs were larger than CM. Both NMs and CM demonstrated shear-thinning behavior and solid-like properties. Among mayonnaises, MJ-NM was demonstrated the most rapid thixotropy recovery with its storage modulus recovered within 51 s. Although both NMs and CM were of mixed tribology nature, NMs presented lower oral lubricity. Upon 210-day storage, both NMs and CM exhibited excellent stabilities without any oil-water separation occurred. Overall, the Pickering emulsions are promising and health alternatives for traditional mayonnaise.

Cellulose and cellulose derivatives: Different colloidal states and food-related applications

Development of new sources and isolation processes has recently enhanced the production of cellulose in many different colloidal states. Even though cellulose is widely used as a functional ingredient in the food industry, the relationship between the colloidal states of cellulose and its applications is mostly unknown. This review covers the recent progress on illustrating various colloidal states of cellulose and the influencing factors with special emphasis on the correlation between the colloidal states of cellulose and its applications in food industry. The associated unique colloidal states of cellulose like high aspect ratio, crystalline structure, surface charge, and wettability not only promote the stability of colloidal systems, but also help improve the nutritional aspects of cellulose by facilitating its interactions with digestive system. Further studies are required for the rational control and improvement of the colloidal states of cellulose and producing food systems with enhanced functional and nutritional properties.

Self-assembled lipids for food applications: A review

Lipids play an important role in human nutrition. Several foodstuffs can be manufactured from the simple, compound and derived lipids. In particular, the use of self-assembled lipids (SLs, e.g. self-assembled L-α-lecithin) has brought great attention for the development of tailored, tuned and targeted colloidal structures loading degradation-sensitive substances with valuable antimicrobial, antioxidant and nutraceutical properties for food applications. For example, polyunsaturated fatty acids (PUFAs) and essential oils can be protected from degradation, thus improving their bioavailability in general terms in consumers. From a nanotechnological point of view, SLs allow the development of advanced and multifaceted architectures, in which each molecule of them are used as building blocks to obtain designed and ordered structures. It is important to note before beginning this review, that simple and compound lipids are the main SLs, while essential fatty acids and derived lipids in general have been considered by many research groups as the bulk loaded substances within several structures from self-assembled carbohydrates, proteins and lipids. However, this review paper is addressed on the analysis of the lipid-lipid self-assembly. Lipids can be self-assembled into various structures (micelles, vesicular systems, lyotropic liquid crystals, oleogels and films) to be used in different food applications: coatings, controlled and sustained release materials, emulsions, functional foods, etc. SLs can be obtained via non-covalent chemical interactions, primarily by hydrogen, hydrophilic and ionic bonding, which are influenced by the conditions of ionic strength, pH, temperature, among others. This manuscript aims to give an analysis of the specific state-of-the-art of SLs for food applications, based primarily on the literature reported in the past five years.

Effect of bamboo shoot dietary fiber on gel properties, microstructure and water distribution of pork meat batters

OBJECTIVE

To develop healthier comminuted meat products to meet consumer demand, the gel properties, rheological properties, microstructure and water distribution of pork meat batters formulated with various amounts of bamboo shoot dietary fiber (BSDF) were investigated.

METHODS

Different levels of BSDF (0% to 4%) were added to pork batters, and the pH, color, water-holding capacity, texture and rheological properties of pork batters were determined. Then, pork batters were analyzed for their microstructure and water distribution using scanning electron microscopy (SEM) and low-field nuclear magnetic resonance (LF-NMR).

RESULTS

Compared with the control, BSDF addition into meat batters showed a significant reduction in L*-value and a significant increase in b*-value (p<0.05). BSDF addition of up to 4% reduced the pH value of pork batters by approximately 0.15 units; however, the cooking loss and expressible water loss decreased significantly (p<0.05) with the increased addition of BSDF. The hardness and gel strength were noticeably enhanced (p<0.05) as the content of BSDF increased. The rheological results showed that BSDF added into pork batters produced higher storage modulus (G') and loss modulus (G″) values. The SEM images suggested that the addition of BSDF could promote pork batters to form a more uniform and compact microstructure. The proportion of immobilized water increased significantly (p<0.05), while the population of free water was decreased (p<0.05), indicating that BSDF improved the water-holding capability of pork batters by decreasing the fraction of free water.

CONCLUSION

BSDF could improve the gel properties, rheological properties and water distribution of pork meat batters and decrease the proportion of free water, suggesting that BSDF has great potential as an effective binder in comminuted meat products.