The biotechnological potential of marine bacteria in the novel lineage of Pseudomonas pertucinogena

Marine Pseudomonas: diving into the waves of blue biotechnology

From marine to terrestrial environments, Pseudomonas spp. exhibit a remarkable ability not only to adapt but also thrive even amidst adverse conditions. This fact turns Pseudomonas spp. into one of the most prominent candidates for novel biotechnological solutions. Even though terrestrial isolates have been extensively studied, there is still an almost untapped source to be explored in marine Pseudomonas. Harnessing such strains offers an opportunity to discover novel bioactive compounds that could address current global challenges in healthcare and sustainable development. Therefore, this minireview aimed to provide an overview of the main recent discoveries regarding antimicrobials, antifouling, enzymes, pigments, and bioremediation strategies derived from marine isolates of Pseudomonas spp. Future research perspectives will also be discussed to foster forthcoming endeavors to explore the marine counterparts of such a prolific bacterial genus.

Pseudomonas huanghezhanensis sp. nov. and Pseudomonas fjordensis sp. nov., two novel species isolated from seawater of Arctic Kongsfjorden in the Ny-Ålesund area, Svalbard

Two Gram-stain-negative bacterial strains, BSw22131T and DMSP-1T, were isolated from seawater of Arctic Kongsfjorden in the Ny-Ålesund area, Svalbard. Strains BSw22131T and DMSP-1T were within the genus Pseudomonas and presented 98.1 and 99.8% 16S rRNA gene sequence similarity to Pseudomonas piscicola P50T and Pseudomonas paracarnis V5/DAB/2/5T, respectively. However, the results of multilocus sequence analysis (concatenated 16S rRNA, gyrB, rpoB and rpoD gene sequences) and whole-genome sequence analysis indicated that BSw22131T and DMSP-1T were most closely related to Pseudomonas petrae P2653T and Pseudomonas lactis DSM 29167T, respectively. The genome G+C contents of strains BSw22131T and DMSP-1T were 58.2 and 60.0%, respectively. The two isolates presented digital DNA-DNA hybridization and average nucleotide identity values of less than 70 and 96%, respectively, with type strain genomes of their close relatives. BSw22131T contained summed feature 3 (C16 : 1  ω6c/C16 : 1  ω7c), C16 : 0 and summed feature 8 (C18 : 1  ω6c/C18 : 1  ω7c) as the major cellular fatty acids, whereas DMSP-1T contained an additional C17 : 0-cyclo as the major fatty acid. The major quinones of both strains were Q-9 (57.5-77.2%) and Q-8 (22.8-37.2%), and their major cellular polar lipids were diphosphatidylglycerol, phosphatidylethanolamine and phosphatidylglycerol. BSw22131T could be differentiated from its related species by positive ornithine decarboxylase, esterase (C8) and l-rhamnose and d-fructose-6-PO4 utilization, whereas DMSP-1T could be differentiated by positive acid phosphatase but negative p-hydroxyphenylacetic acid utilization. The two strains were negative for the reduction of nitrates but contained genes related to dimethylsulfoniopropionate catabolism. The results of the polyphasic taxonomy analysis revealed that strains BSw22131T and DMSP-1T represent two novel species of the genus Pseudomonas, for which the names Pseudomonas huanghezhanensis sp. nov. (type strain BSw22131T = CCTCC AB 2019135T = JCM 36635T = DSM 117336T) and Pseudomonas fjordensis sp. nov. (type strain DMSP-1T = CCTCC AB 2019124T = JCM 36636T = DSM 117337T) are proposed.

Evaluation of the Robustness Under Alkanol Stress and Adaptability of Members of the New Genus Halopseudomonas

Many species of the genus Pseudomonas are known to be highly tolerant to solvents and other environmental stressors. Based on phylogenomic and comparative genomic analyses, several Pseudomonas species were recently transferred to a new genus named Halopseudomonas. Because of their unique enzymatic machinery, these strains are being discussed as novel biocatalysts in biotechnology. In order to test their growth parameters and stress tolerance, five Halopseudomonas strains were assessed regarding their tolerance toward different n-alkanols (1-butanol, 1-hexanol, 1-octanol, 1-decanol), as well as to salt stress and elevated temperatures. The toxicity of the solvents was investigated by their effects on bacterial growth rates and presented as EC50 concentrations. Hereby, all Halopseudomonas strains showed EC50 values up to two-fold lower than those previously detected for Pseudomonas putida. In addition, the activity of the cis-trans isomerase of unsaturated fatty acids (Cti), which is an urgent stress response mechanism known to be present in all Pseudomonas species, was monitored in the five Halopseudomonas strains. Although several of the tested species were known to contain the cti gene, no significant phenotypic activity could be detected in the presence of the assayed stressors. A bioinformatic analysis of eight cti-carrying Halopseudomonas strains examining promotor binding sites, binding motifs and signal peptides showed that most of the cti genes have a lipoprotein signal peptide and promotor regions and binding motifs that do not coincide with those of Pseudomonas. These insights represent putative reasons for the absence of the expected Cti activity in Halopseudomonas, which in turn has always been observed in cti-carrying Pseudomonas. The lack of Cti activity under membrane stress conditions when the cti gene is present has never been documented, and this could represent potential negative implications on the utility of the genus Halopseudomonas for some biotechnological applications.

Plastic-Degrading Enzymes from Marine Microorganisms and Their Potential Value in Recycling Technologies

Since the 2005 discovery of the first enzyme capable of depolymerizing polyethylene terephthalate (PET), an aromatic polyester once thought to be enzymatically inert, extensive research has been undertaken to identify and engineer new biocatalysts for plastic degradation. This effort was directed toward developing efficient enzymatic recycling technologies that could overcome the limitations of mechanical and chemical methods. These enzymes are versatile molecules obtained from microorganisms living in various environments, including soil, compost, surface seawater, and extreme habitats such as hot springs, hydrothermal vents, deep-sea regions, and Antarctic seawater. Among various plastics, PET and polylactic acid (PLA) have been the primary focus of enzymatic depolymerization research, greatly enhancing our knowledge of enzymes that degrade these specific polymers. They often display unique catalytic properties that reflect their particular ecological niches. This review explores recent advancements in marine-derived enzymes that can depolymerize synthetic plastic polymers, emphasizing their structural and functional features that influence the efficiency of these catalysts in biorecycling processes. Current status and future perspectives of enzymatic plastic depolymerization are also discussed, with a focus on the underexplored marine enzymatic resources.

A comparative genomic study of a hydrocarbon-degrading marine bacterial consortium

Ocean oil pollution has a large impact on the environment and the health of living organisms. Bioremediation cleaning strategies are promising eco-friendly alternatives for tackling this problem. Previously, we designed and reported a hydrocarbon (HC) degrading microbial consortium of four marine strains belonging to the species Alloalcanivorax xenomutans, Halopseudomonas aestusnigri, Paenarthrobacter sp., and Pseudomonas aeruginosa. However, the knowledge about the metabolic potential of this bacterial consortium for HC bioremediation is not yet well understood. Here, we analyzed the complete genomes of these marine bacterial strains accompanied by a phylogenetic reconstruction along with 138 bacterial strains. Synteny between complete genomes of the same species or genus, revealed high conservation among strains of the same species, covering over 91% of their genomic sequences. Functional predictions highlighted a high abundance of genes related to HC degradation, which may result in functional redundancy within the consortium; however, unique and complete gene clusters linked to aromatic degradation were found in the four genomes, suggesting substrate specialization. Pangenome gain and loss analysis of genes involved in HC degradation provided insights into the evolutionary history of these capabilities, shedding light on the acquisition and loss of relevant genes related to alkane and aromatic degradation. Our work, including comparative genomic analyses, identification of secondary metabolites, and prediction of HC-degrading genes, enhances our understanding of the functional diversity and ecological roles of these marine bacteria in crude oil-contaminated marine environments and contributes to the applied knowledge of bioremediation.

Biodegradation of poly(ester-urethane) coatings by Halopseudomonas formosensis

Impranil® DLN-SD is a poly(ester-urethane) (PEU) that is widely used as coating material for textiles to fine-tune and improve their properties. Since coatings increase the complexity of such plastic materials, they can pose a hindrance for sustainable end-of-life solutions of plastics using enzymes or microorganisms. In this study, we isolated Halopseudomonas formosensis FZJ due to its ability to grow on Impranil DLN-SD and other PEUs as sole carbon sources. The isolated strain was exceptionally thermotolerant as it could degrade Impranil DLN-SD at up to 50°C. We identified several putative extracellular hydrolases of which the polyester hydrolase Hfor_PE-H showed substrate degradation of Impranil DLN-SD and thus was purified and characterized in detail. Hfor_PE-H showed moderate temperature stability (Tm = 53.9°C) and exhibited activity towards Impranil DLN-SD as well as polyethylene terephthalate. Moreover, we revealed the enzymatic release of monomers from Impranil DLN-SD by Hfor_PE-H using GC-ToF-MS and could decipher the associated metabolic pathways in H. formosensis FZJ. Overall, this study provides detailed insights into the microbial and enzymatic degradation of PEU coatings, thereby deepening our understanding of microbial coating degradation in both contained and natural environments. Moreover, the study highlights the relevance of the genus Halopseudomonas and especially the novel isolate and its enzymes for future bio-upcycling processes of coated plastic materials.

The metagenome-derived esterase PET40 is highly promiscuous and hydrolyses polyethylene terephthalate (PET)

Polyethylene terephthalate (PET) is a widely used synthetic polymer and known to contaminate marine and terrestrial ecosystems. Only few PET-active microorganisms and enzymes (PETases) are currently known, and it is debated whether degradation activity for PET originates from promiscuous enzymes with broad substrate spectra that primarily act on natural polymers or other bulky substrates, or whether microorganisms evolved their genetic makeup to accepting PET as a carbon source. Here, we present a predicted diene lactone hydrolase designated PET40, which acts on a broad spectrum of substrates, including PET. It is the first esterase with activity on PET from a GC-rich Gram-positive Amycolatopsis species belonging to the Pseudonocardiaceae (Actinobacteria). It is highly conserved within the genera Amycolatopsis and Streptomyces. PET40 was identified by sequence-based metagenome search using a PETase-specific hidden Markov model. Besides acting on PET, PET40 has a versatile substrate spectrum, hydrolyzing δ-lactones, β-lactam antibiotics, the polyester-polyurethane Impranil® DLN, and various para-nitrophenyl ester substrates. Molecular docking suggests that the PET degradative activity is likely a result of the promiscuity of PET40, as potential binding modes were found for substrates encompassing mono(2-hydroxyethyl) terephthalate, bis(2-hydroxyethyl) terephthalate, and a PET trimer. We also solved the crystal structure of the inactive PET40 variant S178A to 1.60 Å resolution. PET40 is active throughout a wide pH (pH 4-10) and temperature range (4-65 °C) and remarkably stable in the presence of 5% SDS, making it a promising enzyme as a starting point for further investigations and optimization approaches.

Halopseudomonas species: Cultivation and molecular genetic tools

The Halopseudomonas species, formerly classified as Pseudomonas pertucinogena lineage, form a unique phylogenetic branch within the Pseudomonads. Most strains have recently been isolated from challenging habitats including oil- or metal-polluted sites, deep sea, and intertidal zones, suggesting innate resilience to physical and chemical stresses. Despite their comparably small genomes, these bacteria synthesise several biomolecules with biotechnological potential and a role in the degradation of anthropogenic pollutants has been suggested for some Halopseudomonads. Until now, these bacteria are not readily amenable to existing cultivation and cloning methods. We addressed these limitations by selecting four Halopseudomonas strains of particular interest, namely H. aestusnigri, H. bauzanensis, H. litoralis, and H. oceani to establish microbiological and molecular genetic methods. We found that C4 -C10 dicarboxylic acids serve as viable carbon sources in both complex and mineral salt cultivation media. We also developed plasmid DNA transfer protocols and assessed vectors with different origins of replication and promoters inducible with isopropyl-β-d-thiogalactopyranoside, l-arabinose, and salicylate. Furthermore, we have demonstrated the simultaneous genomic integration of expression cassettes into one and two attTn7 integration sites. Our results provide a valuable toolbox for constructing robust chassis strains and highlight the biotechnological potential of Halopseudomonas strains.

A review on cutinases enzyme in degradation of microplastics

From the surface of the earth to the depths of the ocean, microplastics are a hazard for both aquatic and terrestrial habitats. Due to their small size and vast expanse, they can further integrate into living things. The fate of microplastics in the environment depends upon the biotic components such as microorganisms which have potential enzymes to degrade the microplastics. As a result, scientists are interested in using microorganisms like bacteria, fungi, and others to remediate microplastic. These microorganisms release the cutinase enzyme, which is associated with the enzymatic breakdown of microplastics and plastic films. Yet, numerous varieties of microplastics exist in the environment and their contaminants act as a significant challenge in degrading microplastics. The review discusses the cutinases enzyme degradation strategies and potential answers to deal with existing and newly generated microplastic waste - polyethylene (PE), polyethylene terephthalate (PET), poly-ε-caprolactone (PCL), polyurethanes (PU), and polybutylene succinate (PBS), along with their degradation pathways. The potential of cutinase enzymes from various microorganisms can effectively act to remediate the global problem of microplastic pollution.

Review on impacts of micro- and nano-plastic on aquatic ecosystems and mitigation strategies

The rapid proliferation of microplastics (MPs) and nanoplastics (NPs) in our environment presents a formidable hazard to both biotic and abiotic components. These pollutants originate from various sources, including commercial production and the breakdown of larger plastic particles. Widespread contamination of the human body, agroecosystems, and animals occurs through ingestion, entry into the food chain, and inhalation. Consequently, the imperative to devise innovative methods for MPs and NPs remediation has become increasingly apparent. This review explores the current landscape of strategies proposed to mitigate the escalating threats associated with plastic waste. Among the array of methods in use, microbial remediation emerges as a promising avenue for the decomposition and reclamation of MPs and NPs. In response to the growing concern, numerous nations have already implemented or are in the process of adopting regulations to curtail MPs and NPs in aquatic habitats. This paper aims to address this gap by delving into the environmental fate, behaviour, transport, ecotoxicity, and management of MPs and NPs particles within the context of nanoscience, microbial ecology, and remediation technologies. Key findings of this review encompass the intricate interdependencies between MPs and NPs and their ecosystems. The ecological impact, from fate to ecotoxicity, is scrutinized in light of the burgeoning environmental imperative. As a result, this review not only provides an encompassing understanding of the ecological ramifications of MPs and NPs but also highlights the pressing need for further research, innovation, and informed interventions.

Revealing the Host-Dependent Nature of an Engineered Genetic Inverter in Concordance with Physiology

Broad-host-range synthetic biology is an emerging frontier that aims to expand our current engineerable domain of microbial hosts for biodesign applications. As more novel species are brought to "model status," synthetic biologists are discovering that identically engineered genetic circuits can exhibit different performances depending on the organism it operates within, an observation referred to as the "chassis effect." It remains a major challenge to uncover which genome-encoded and biological determinants will underpin chassis effects that govern the performance of engineered genetic devices. In this study, we compared model and novel bacterial hosts to ask whether phylogenomic relatedness or similarity in host physiology is a better predictor of genetic circuit performance. This was accomplished using a comparative framework based on multivariate statistical approaches to systematically demonstrate the chassis effect and characterize the performance dynamics of a genetic inverter circuit operating within 6 Gammaproteobacteria. Our results solidify the notion that genetic devices are strongly impacted by the host context. Furthermore, we formally determined that hosts exhibiting more similar metrics of growth and molecular physiology also exhibit more similar performance of the genetic inverter, indicating that specific bacterial physiology underpins measurable chassis effects. The result of this study contributes to the field of broad-host-range synthetic biology by lending increased predictive power to the implementation of genetic devices in less-established microbial hosts.

Genomic diversity and metabolic potential of marine Pseudomonadaceae

Recent changes in the taxonomy of the Pseudomonadaceae family have led to the delineation of three new genera (Atopomonas, Halopseudomonas and Stutzerimonas). However, the genus Pseudomonas remains the most densely populated and displays a broad genetic diversity. Pseudomonas are able to produce a wide variety of secondary metabolites which drives important ecological functions and have a great impact in sustaining their lifestyles. While soilborne Pseudomonas are constantly examined, we currently lack studies aiming to explore the genetic diversity and metabolic potential of marine Pseudomonas spp. In this study, 23 Pseudomonas strains were co-isolated with Vibrio strains from three marine microalgal cultures and rpoD-based phylogeny allowed their assignment to the Pseudomonas oleovorans group (Pseudomonas chengduensis, Pseudomonas toyotomiensis and one new species). We combined whole genome sequencing on three selected strains with an inventory of marine Pseudomonas genomes to assess their phylogenetic assignations and explore their metabolic potential. Our results revealed that most strains are incorrectly assigned at the species level and half of them do not belong to the genus Pseudomonas but instead to the genera Halopseudomonas or Stutzerimonas. We highlight the presence of 26 new species (Halopseudomonas (n = 5), Stutzerimonas (n = 7) and Pseudomonas (n = 14)) and describe one new species, Pseudomonas chaetocerotis sp. nov. (type strain 536^T = LMG 31766^T = DSM 111343^T). We used genome mining to identify numerous BGCs coding for the production of diverse known metabolites (i.e., osmoprotectants, photoprotectants, quorum sensing molecules, siderophores, cyclic lipopeptides) but also unknown metabolites (e.g., ARE, hybrid ARE-DAR, siderophores, orphan NRPS gene clusters) awaiting chemical characterization. Finally, this study underlines that marine environments host a huge diversity of Pseudomonadaceae that can drive the discovery of new secondary metabolites.

Toxicity of the antiparasitic lipopeptide biosurfactant SPH6 to green algae, cyanobacteria, crustaceans and zebrafish

A lipopeptide with biosurfactant properties produced by the bacterium Pseudomonas H6 (SPH6) has antiparasitic effects and may serve as an alternative to chemotherapeutants against aquatic pathogens in aquaculture. We have elucidated its ecotoxicological potential by short-term standardized tests, including a growth rate inhibition test with algae (Raphidocelis subcapitata), a lethality test on the cyanobacteria Phormidium autumnale, a lethality test using crustaceans (Daphnia magna), a fish embryo acute toxicity test and a fish acute toxicity test using zebrafish (Danio rerio). The decrease of the biosurfactant concentration in zebrafish test water during 24 h was measured. The toxicity for crustaceans was highest (LC₅₀ = 20 mg/L), followed by the test with the zebrafish embryo (LC₅₀ = 27 mg/L). The juvenile zebrafish fish (complete mortality occurred between 40 and 80 mg/L), the cyanobacteria (LC₅₀ = 80 mg/L) and the green algae (EC₅₀ = 170 mg/L) showed higher tolerance. The determination of SPH6 concentrations in fish tank (up to 50% elimination over 24 h) suggested that the compound may become adsorbed to tank walls, absorbed by fish or degraded. Further studies should determine its impact under different environmental settings (e.g. temperature) relevant for different branches of the aquaculture sector.

Removal of heavy oil from contaminated surfaces with a detergent formulation containing biosurfactants produced by Pseudomonas spp

Industrial plants powered by heavy oil routinely experience problems with leaks in different parts of the system, such as during oil transport, the lubrication of equipment and mechanical failures. The surfactants, degreasing agents and solvents that make up detergents commonly used for cleaning grease-covered surfaces are synthetic, non-biodegradable and toxic, posing risks to the environment as well as the health of workers involved in the cleaning process. To address this problem, surfactant agents of a biodegradable nature and low toxicity, such as microbial surfactants, have been widely studied as an attractive, efficient solution to replace chemical surfactants in decontamination processes. In this work, the bacterial strains Pseudomonas cepacia CCT 6659, Pseudomonas aeruginosa UCP 0992, Pseudomonas aeruginosa ATCC 9027 and Pseudomonas aeruginosa ATCC 10145 were evaluated as biosurfactant producers in media containing different combinations and types of substrates and under different culture conditions. The biosurfactant produced by P. aeruginosa ATCC 10145 cultivated in a mineral medium composed of 5.0% glycerol and 2.0% glucose for 96 h was selected to formulate a biodetergent capable of removing heavy oil. The biosurfactant was able to reduce the surface tension of the medium to 26.40 mN/m, with a yield of approximately 12.00 g/L and a critical micelle concentration of 60.00 mg/L. The biosurfactant emulsified 97.40% and dispersed 98.00% of the motor oil. The detergent formulated with the biosurfactant also exhibited low toxicity in tests involving the microcrustacean Artemia salina and seeds of the vegetable Brassica oleracea. The detergent was compared to commercial formulations and removed 100% of the Special B1 Fuel Oil (OCB1) from different contaminated surfaces, demonstrating potential as a novel green remover with industrial applications.

Marine organisms: Pioneer natural sources of polysaccharides/proteins for green synthesis of nanoparticles and their potential applications

Current innovations in the marine bionanotechnology arena are supporting and stimulating developments in other fields, including nanomedicine, pharmaceuticals, sensors, environmental trends, food, and agriculture aspects. Many oceanic creatures, particularly algae, plants, bacteria, yeast, fungi, cyanobacteria, actinomyces, invertebrates, animals and sponges can survive under extreme circumstances. They can biogenerate a broad spectrum of phytochemicals/metabolites, including proteins, peptides, alkaloids, flavonoids, polyphenols, carbohydrate polymers, polysaccharides, sulfated polysaccharides, polysaccharide-protein complexes such as carrageenan, fucoidanase, fucoidan, carboxymethyl cellulose, poly-γ-glutamic acid, sugar residues with proteins, melanin, haemocyanin, etc). These products exhibit exclusive advantages that offer pioneering roles in the eco-friendly fabrication of several nanoparticles (NPs) i.e., Ag, Au, Ru, Fe₂O₃, Cobalt (III) Oxide (Co₂O₃), ZnO and Ag@AgCl within a single phase. Importantly, marine organisms can biosynthesize NPs in two modes, namely extracellular and intracellular. Biosynthesized NPs can be characterized using various methodologies among them, ultraviolet-visible spectroscopy, fourier transform infrared spectroscopy, transmission electron microscopy, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Taken together, this review focuses on the green synthesis of metallic, metallic oxides and nonmetallic NPs utilizing extracts/derivatives from marine organisms based on eco-friendly green biogenic procedures. Moreover, significant attention is given to the medicinal and industrial importance of such marine organisms mediated NPs.

Perspectives on the Role of Enzymatic Biocatalysis for the Degradation of Plastic PET

Plastics are highly durable and widely used materials. Current methodologies of plastic degradation, elimination, and recycling are flawed. In recent years, biodegradation (the usage of microorganisms for material recycling) has grown as a valid alternative to previously used methods. The evolution of bioengineering techniques and the discovery of novel microorganisms and enzymes with degradation ability have been key. One of the most produced plastics is PET, a long chain polymer of terephthalic acid (TPA) and ethylene glycol (EG) repeating monomers. Many enzymes with PET degradation activity have been discovered, characterized, and engineered in the last few years. However, classification and integrated knowledge of these enzymes are not trivial. Therefore, in this work we present a summary of currently known PET degrading enzymes, focusing on their structural and activity characteristics, and summarizing engineering efforts to improve activity. Although several high potential enzymes have been discovered, further efforts to improve activity and thermal stability are necessary.

Towards robust Pseudomonas cell factories to harbour novel biosynthetic pathways

Biotechnological production in bacteria enables access to numerous valuable chemical compounds. Nowadays, advanced molecular genetic toolsets, enzyme engineering as well as the combinatorial use of biocatalysts, pathways, and circuits even bring new-to-nature compounds within reach. However, the associated substrates and biosynthetic products often cause severe chemical stress to the bacterial hosts. Species of the Pseudomonas clade thus represent especially valuable chassis as they are endowed with multiple stress response mechanisms, which allow them to cope with a variety of harmful chemicals. A built-in cell envelope stress response enables fast adaptations that sustain membrane integrity under adverse conditions. Further, effective export machineries can prevent intracellular accumulation of diverse harmful compounds. Finally, toxic chemicals such as reactive aldehydes can be eliminated by oxidation and stress-induced damage can be recovered. Exploiting and engineering these features will be essential to support an effective production of natural compounds and new chemicals. In this article, we therefore discuss major resistance strategies of Pseudomonads along with approaches pursued for their targeted exploitation and engineering in a biotechnological context. We further highlight strategies for the identification of yet unknown tolerance-associated genes and their utilisation for engineering next-generation chassis and finally discuss effective measures for pathway fine-tuning to establish stable cell factories for the effective production of natural compounds and novel biochemicals.

Together Is Better: The Rumen Microbial Community as Biological Toolbox for Degradation of Synthetic Polyesters

Identfication of plastics degradation and microbial community analysis of Rumen.

Collapse

Biosurfactants and Their Applications in the Oil and Gas Industry: Current State of Knowledge and Future Perspectives

Surfactants are a group of amphiphilic chemical compounds (i.e., having both hydrophobic and hydrophilic domains) that form an indispensable component in almost every sector of modern industry. Their significance is evidenced from the enormous volumes that are used and wide diversity of applications they are used in, ranging from food and beverage, agriculture, public health, healthcare/medicine, textiles, and bioremediation. A major drive in recent decades has been toward the discovery of surfactants from biological/natural sources-namely bio-surfactants-as most surfactants that are used today for industrial applications are synthetically-manufactured via organo-chemical synthesis using petrochemicals as precursors. This is problematic, not only because they are derived from non-renewable resources, but also because of their environmental incompatibility and potential toxicological effects to humans and other organisms. This is timely as one of today's key challenges is to reduce our reliance on fossil fuels (oil, coal, gas) and to move toward using renewable and sustainable sources. Considering the enormous genetic diversity that microorganisms possess, they offer considerable promise in producing novel types of biosurfactants for replacing those that are produced from organo-chemical synthesis, and the marine environment offers enormous potential in this respect. In this review, we begin with an overview of the different types of microbial-produced biosurfactants and their applications. The remainder of this review discusses the current state of knowledge and trends in the usage of biosurfactants by the Oil and Gas industry for enhancing oil recovery from exhausted oil fields and as dispersants for combatting oil spills.

Microbial and Enzymatic Degradation of Synthetic Plastics

Synthetic plastics are pivotal in our current lifestyle and therefore, its accumulation is a major concern for environment and human health. Petroleum-derived (petro-)polymers such as polyethylene (PE), polyethylene terephthalate (PET), polyurethane (PU), polystyrene (PS), polypropylene (PP), and polyvinyl chloride (PVC) are extremely recalcitrant to natural biodegradation pathways. Some microorganisms with the ability to degrade petro-polymers under in vitro conditions have been isolated and characterized. In some cases, the enzymes expressed by these microbes have been cloned and sequenced. The rate of polymer biodegradation depends on several factors including chemical structures, molecular weights, and degrees of crystallinity. Polymers are large molecules having both regular crystals (crystalline region) and irregular groups (amorphous region), where the latter provides polymers with flexibility. Highly crystalline polymers like polyethylene (95%), are rigid with a low capacity to resist impacts. PET-based plastics possess a high degree of crystallinity (30-50%), which is one of the principal reasons for their low rate of microbial degradation, which is projected to take more than 50 years for complete degraded in the natural environment, and hundreds of years if discarded into the oceans, due to their lower temperature and oxygen availability. The enzymatic degradation occurs in two stages: adsorption of enzymes on the polymer surface, followed by hydro-peroxidation/hydrolysis of the bonds. The sources of plastic-degrading enzymes can be found in microorganisms from various environments as well as digestive intestine of some invertebrates. Microbial and enzymatic degradation of waste petro-plastics is a promising strategy for depolymerization of waste petro-plastics into polymer monomers for recycling, or to covert waste plastics into higher value bioproducts, such as biodegradable polymers via mineralization. The objective of this review is to outline the advances made in the microbial degradation of synthetic plastics and, overview the enzymes involved in biodegradation.

The Variety and Inscrutability of Polar Environments as a Resource of Biotechnologically Relevant Molecules

The application of an ever-increasing number of methodological approaches and tools is positively contributing to the development and yield of bioprospecting procedures. In this context, cold-adapted bacteria from polar environments are becoming more and more intriguing as valuable sources of novel biomolecules, with peculiar properties to be exploited in a number of biotechnological fields. This review aims at highlighting the biotechnological potentialities of bacteria from Arctic and Antarctic habitats, both biotic and abiotic. In addition to cold-enzymes, which have been intensively analysed, relevance is given to recent advances in the search for less investigated biomolecules, such as biosurfactants, exopolysaccharides and antibiotics.

MapA, a Second Large RTX Adhesin Conserved across the Pseudomonads, Contributes to Biofilm Formation by Pseudomonas fluorescens

Mechanisms by which cells attach to a surface and form a biofilm are diverse and differ greatly among organisms. The Gram-negative gammaproteobacterium Pseudomonas fluorescens attaches to a surface through the localization of the large type 1-secreted RTX adhesin LapA to the outer surface of the cell. LapA localization to the cell surface is controlled by the activities of a periplasmic protease, LapG, and an inner membrane-spanning cyclic di-GMP-responsive effector protein, LapD. A previous study identified a second, LapA-like protein encoded in the P. fluorescens Pf0-1 genome: Pfl01_1463. Here, we identified specific growth conditions under which Pfl01_1463, here called MapA (medium adhesion protein A) is a functional adhesin contributing to biofilm formation. This adhesin, like LapA, appears to be secreted through a Lap-related type 1 secretion machinery, and its localization is controlled by LapD and LapG. However, differing roles of LapA and MapA in biofilm formation are achieved, at least in part, through the differences in the sequences of the two adhesins and different distributions of the expression of the lapA and mapA genes within a biofilm. LapA-like proteins are broadly distributed throughout the Proteobacteria, and furthermore, LapA and MapA are well conserved among other Pseudomonas species. Together, our data indicate that the mechanisms by which a cell forms a biofilm and the components of a biofilm matrix can differ depending on growth conditions and the matrix protein(s) expressed.IMPORTANCE Adhesins are critical for the formation and maturation of bacterial biofilms. We identify a second adhesin in P. fluorescens, called MapA, which appears to play a role in biofilm maturation and whose regulation is distinct from the previously reported LapA adhesin, which is critical for biofilm initiation. Analysis of bacterial adhesins shows that LapA-like and MapA-like adhesins are found broadly in pseudomonads and related organisms, indicating that the utilization of different suites of adhesins may be broadly important in the Gammaproteobacteria.

Reliable Identification of Environmental Pseudomonas Isolates Using the rpoD Gene

The taxonomic affiliation of Pseudomonas isolates is currently assessed by using the 16S rRNA gene, MultiLocus Sequence Analysis (MLSA), or whole genome sequencing. Therefore, microbiologists are facing an arduous choice, either using the universal marker, knowing that these affiliations could be inaccurate, or engaging in more laborious and costly approaches. The rpoD gene, like the 16S rRNA gene, is included in most MLSA procedures and has already been suggested for the rapid identification of certain groups of Pseudomonas. However, a comprehensive overview of the rpoD-based phylogenetic relationships within the Pseudomonas genus is lacking. In this study, we present the rpoD-based phylogeny of 217 type strains of Pseudomonas and defined a cutoff value of 98% nucleotide identity to differentiate strains at the species level. To validate this approach, we sequenced the rpoD of 145 environmental isolates and complemented this analysis with whole genome sequencing. The rpoD sequence allowed us to accurately assign Pseudomonas isolates to 20 known species and represents an excellent first diagnostic tool to identify new Pseudomonas species. Finally, rpoD amplicon sequencing appears as a reliable and low-cost alternative, particularly in the case of large environmental studies with hundreds or thousands of isolates.

A Novel Polyester Hydrolase From the Marine Bacterium Pseudomonas aestusnigri - Structural and Functional Insights

Biodegradation of synthetic polymers, in particular polyethylene terephthalate (PET), is of great importance, since environmental pollution with PET and other plastics has become a severe global problem. Here, we report on the polyester degrading ability of a novel carboxylic ester hydrolase identified in the genome of the marine hydrocarbonoclastic bacterium Pseudomonas aestusnigri VGXO14^T. The enzyme, designated PE-H, belongs to the type IIa family of PET hydrolytic enzymes as indicated by amino acid sequence homology. It was produced in Escherichia coli, purified and its crystal structure was solved at 1.09 Å resolution representing the first structure of a type IIa PET hydrolytic enzyme. The structure shows a typical α/β-hydrolase fold and high structural homology to known polyester hydrolases. PET hydrolysis was detected at 30°C with amorphous PET film (PETa), but not with PET film from a commercial PET bottle (PETb). A rational mutagenesis study to improve the PET degrading potential of PE-H yielded variant PE-H (Y250S) which showed improved activity, ultimately also allowing the hydrolysis of PETb. The crystal structure of this variant solved at 1.35 Å resolution allowed to rationalize the improvement of enzymatic activity. A PET oligomer binding model was proposed by molecular docking computations. Our results indicate a significant potential of the marine bacterium P. aestusnigri for PET degradation.

Agar plate-based screening methods for the identification of polyester hydrolysis by Pseudomonas species

Hydrolases acting on polyesters like cutin, polycaprolactone or polyethylene terephthalate (PET) are of interest for several biotechnological applications like waste treatment, biocatalysis and sustainable polymer modifications. Recent studies suggest that a large variety of such enzymes are still to be identified and explored in a variety of microorganisms, including bacteria of the genus Pseudomonas. For activity-based screening, methods have been established using agar plates which contain nanoparticles of polycaprolactone or PET prepared by solvent precipitation and evaporation. In this protocol article, we describe a straightforward agar plate-based method using emulsifiable artificial polyesters as substrates, namely Impranil® DLN and liquid polycaprolactone diol (PLD). Thereby, the currently quite narrow set of screening substrates is expanded. We also suggest optional pre-screening with short-chain and middle-chain-length triglycerides as substrates to identify enzymes with lipolytic activity to be further tested for polyesterase activity. We applied these assays to experimentally demonstrate polyesterase activity in bacteria from the P. pertucinogena lineage originating from contaminated soils and diverse marine habitats.

The biotechnological potential of marine bacteria in the novel lineage of Pseudomonas pertucinogena

Marine habitats represent a prolific source for molecules of biotechnological interest. In particular, marine bacteria have attracted attention and were successfully exploited for industrial applications. Recently, a group of Pseudomonas species isolated from extreme habitats or living in association with algae or sponges were clustered in the newly established Pseudomonas pertucinogena lineage. Remarkably for the predominantly terrestrial genus Pseudomonas, more than half (9) of currently 16 species within this lineage were isolated from marine or saline habitats. Unlike other Pseudomonas species, they seem to have in common a highly specialized metabolism. Furthermore, the marine members apparently possess the capacity to produce biomolecules of biotechnological interest (e.g. dehalogenases, polyester hydrolases, transaminases). Here, we summarize the knowledge regarding the enzymatic endowment of the marine Pseudomonas pertucinogena bacteria and report on a genomic analysis focusing on the presence of genes encoding esterases, dehalogenases, transaminases and secondary metabolites including carbon storage compounds.

Plastics: Environmental and Biotechnological Perspectives on Microbial Degradation

Plastics are widely used in the global economy, and each year, at least 350 to 400 million tons are being produced. Due to poor recycling and low circular use, millions of tons accumulate annually in terrestrial or marine environments. Today it has become clear that plastic causes adverse effects in all ecosystems and that microplastics are of particular concern to our health. Therefore, recent microbial research has addressed the question of if and to what extent microorganisms can degrade plastics in the environment. This review summarizes current knowledge on microbial plastic degradation. Enzymes available act mainly on the high-molecular-weight polymers of polyethylene terephthalate (PET) and ester-based polyurethane (PUR). Unfortunately, the best PUR- and PET-active enzymes and microorganisms known still have moderate turnover rates. While many reports describing microbial communities degrading chemical additives have been published, no enzymes acting on the high-molecular-weight polymers polystyrene, polyamide, polyvinylchloride, polypropylene, ether-based polyurethane, and polyethylene are known. Together, these polymers comprise more than 80% of annual plastic production. Thus, further research is needed to significantly increase the diversity of enzymes and microorganisms acting on these polymers. This can be achieved by tapping into the global metagenomes of noncultivated microorganisms and dark matter proteins. Only then can novel biocatalysts and organisms be delivered that allow rapid degradation, recycling, or value-added use of the vast majority of most human-made polymers.