Correlation of extracellular polymeric substances and microbial community structure in denitrification biofilm exposed to adverse conditions

Redox mediator chlorophyll accelerates low-temperature biological denitrification with responses of extracellular polymers and changes in microbial community composition

Low temperatures limit the denitrification wastewater in activated sludge systems, but this can be mitigated by addition of redox mediators (RMs). Here, the effects of chlorophyll (Chl), 1,2-naphthoquinone-4-sulfonic acid (NQS), humic acid (HA), and riboflavin (RF), each tested at three concentrations, were compared for denitrification performance at low temperature, by monitoring the produced extracellular polymeric substances (EPS), and characterizing microbial communities and their metabolic potential. Chl increased the denitrification rate most, namely 4.12-fold compared to the control, followed by NQS (2.62-fold increase) and HA (1.35-fold increase), but RF had an inhibitory effect. Chl promoted the secretion of tryptophan-like and tyrosine-like proteins in the EPS and aided the conversion of protein from tightly bound EPS into loosely bound EPS, which improved the material transfer efficiency. NQS, HA, and RF also altered the EPS components. The four RMs affected the microbial community structure, whereby both conditionally abundant taxa (CAT) and conditionally rare or abundant taxa (CRAT) were key taxa. Among them, CRAT members interacted most with the other taxa. Chl promoted Flavobacterium enrichment in low-temperature activated sludge systems. In addition, Chl promoted the abundance of nitrate reduction genes narGHI and napAB and of nitrite reduction genes nirKS, norBC, and nosZ. Moreover, Chl increased abundance of genes involved in acetate metabolism and in the TCA cycle, thereby improving carbon source utilization. This study increases our understanding of the enhancement of low-temperature activated sludge by RMs, and demonstrates positive effects, in particular by Chl.

PHA and EPS production from industrial wastewater by conventional activated sludge, membrane bioreactor and aerobic granular sludge technologies: A comprehensive comparison

The present study has focused on the mainstream integration of polyhydroxyalkanoate (PHA) production with industrial wastewater treatment by exploiting three different technologies all operating in sequencing batch reactors (SBR): conventional activated sludge (AS-SBR), membrane bioreactor (AS-MBR) and aerobic granular sludge (AGS). A full aerobic feast/famine strategy was adopted to obtain enrichment of biomass with PHA-storing bacteria. All the systems were operated at different organic loading (OLR) rate equal to 1-2-3 kgCOD/m3∙d in three respective experimental periods. The AS-MBR showed the better and stable carbon removal performance, whereas the effluent quality of the AS-SBR and AGS deteriorated at high OLR. Biomass enrichment with PHA-storing bacteria was successfully obtained in all the systems. The AS-MBR improved the PHA productivity with increasing OLR (max 35% w/w), whereas the AS-SBR reduced the PHA content (max 20% w/w) above an OLR threshold of 2 kgCOD/m3∙d. In contrast, in the AGS the increase of OLR resulted in a significant decrease in PHA productivity (max 14% w/w) and a concomitant increase of extracellular polymers (EPS) production (max 75% w/w). Results demonstrated that organic carbon was mainly driven towards the intracellular storage pathway in the AS-SBR (max yield 51%) and MBR (max yield 61%), whereas additional stressors in AGS (e.g., hydraulic selection pressure, shear forces) induced bacteria to channel the COD into extracellular storage compounds (max yield 50%) necessary to maintain the granule's structure. The results of the present study indicated that full-aerobic feast/famine strategy was more suitable for flocculent sludge-based technologies, although biofilm-like systems could open new scenarios for other biopolymers recovery (e.g., EPS). Moreover, the AS-MBR resulted the most suitable technology for the integration of PHA production in a mainstream industrial wastewater treatment plant, considering the greater process stability and the potential reclamation of the treated wastewater.

Modelling biofilm development: The importance of considering the link between EPS distribution, detachment mechanisms and physical properties

In industry, treatments against biofilms need to be optimized and, in the wastewater treatment field, biofilm composition needs to be controlled. Therefore, describing the biochemical and physical structures of biofilms is now required to better understand the influence of operating parameters and treatment on biofilms. The present study aims to investigate how growth conditions influence EPS composition, biofilm physical properties and volume detachment using a 1D biofilm model. Two types of EPS are considered in the present model, proteins and polysaccharides. The main hypotheses are that: (i) the production of polysaccharides occurs mainly under strong nutrient limitation(s) while the production of proteins is coupled to both the substrate uptake rate and the lysis process; (ii) the local biofilm porosity depends on the local biofilm composition. Both volume and surface detachment occur in biofilms and volume detachment extent depends on the biofilm local cohesion and thus on the local composition of biofilms for a given shear stress. The model is based on experimental trends and aims to represent these observations on the basis of biochemical and physical processes. Four case studies covering a wide range of contrasting growth conditions such as different COD/N ratios, applied SOLR and shear stresses are investigated. The model predicts how the biochemical and physical biofilm structures change as a result of contrasting growth conditions. More precisely simulation results are in good agreement with the main experimental observations reported in the literature, such as: (i) a strong nitrogen limitation of growth induces an important accumulation of polysaccharides leading to a more porous and homogenous biofilm, (ii) a high applied surface organic loading load allows to obtain a high biofilm thickness, (iii) a strong shear stress applied during the biofilm growth leads to a reduction of the biofilm thickness and to a consolidation of the biofilm structure. Overall, this model represents a relevant decision tool for the selection of appropriate enzymatic treatments in the context of negative biofilm control. From our results, it appears that protease based treatments should be more appropriate for biofilms developed under low COD/N ratios (about 20 gCOD/gN) whereas both glucosidases and proteases based treatments should be more appropriate for biofilms developed under high COD/N ratio (about 70 gCOD/gN). In addition, the model could be useful for other applications such as resource recovery in biofilms or granules, and help to better understand biological membrane fouling.

Insights into biofilm development on polyhydroxyalkanoate biofilm carrier for anoxic azo dye decolourization of acid orange 7

Polyhydroxyalkanoates (PHAs) are promising alternatives to non-degradable polymers in various applications. This study explored the use of biologically recovered PHA as a biofilm carrier in a moving bed biofilm reactor for acid orange 7 treatment. The PHA was comprised of 86 ± 1 mol% of 3-hydroxybutyrate and 14 ± 1 mol% of 3-hydroxyhexanoate and was melt-fused at 140 °C into pellets. The net positive surface charge of the PHA biocarrier facilitated attachment of negatively charged activated sludge, promoting biofilm formation. A 236-µm mature biofilm developed after 26 days. The high polysaccharides-to-protein ratio (>1) in the biofilm's extracellular polymeric substances indicated a stable biofilm structure. Four main microbial strains in the biofilm were identified as Leclercia adecarboxylata, Leuconostoc citreum, Bacillus cereus, and Rhodotorula mucilaginosa, all of which exhibited decolourization abilities. In conclusion, PHA holds promise as an effective biocarrier for biofilm development, offering a sustainable alternative in wastewater treatment applications.

Weak magnetic carriers reduce nitrite accumulation and boost denitrification at high nitrate concentrations by enriching functional bacteria and enhancing electron transfer

Biological denitrification is the dominant method for NO3- removal from wastewater, while high NO3- leads to NO2- accumulation and inhibits denitrification performance. In this study, different weak magnetic carriers (0, 0.3, 0.6, 0.9 mT) were used to enhance biological denitrification at NO3- of 50-2400 mg/L. The effect of magnetic carriers on the removal and mechanism of denitrification of high NO3- was investigated. The results showed that 0.6 and 0.9 mT carriers significantly enhanced the TN removal efficiency (>99%) and reduced the accumulation of NO2- (by > 97%) at NO3- of 1200-2400 mg/L 0.6 and 0.9 mT carriers stimulated microbial electron transport by improving the abundances of coenzyme Q-cytochrome C reductase (by 4.44-23.30%) and cytochrome C (by 2.90-16.77%), which contributed to the enhanced elimination of NO3- and NO2-. 0.6 and 0.9 mT carriers increased the activities of NAR (by 3.74-37.59%) and NIR (by 5.01-8.24%). The abundance of narG genes in 0.6 and 0.9 mT was 1.47-2.35 and 1.38-1.75 times that of R1, respectively, and the abundance of nirS genes was 1.49-2.83 and 1.55-2.39 times that of R1, respectively. Denitrifying microorganisms, e.g., Halomonas, Thauera and Pseudomonas were enriched at 0.6 and 0.9 mT carriers, which benefited to the advanced denitrification performance. This study suggests that weak magnetic carriers can help to enhance the biological denitrification of high NO3- wastewater.

Non-filamentous sludge bulking induced by exopolysaccharide variation in structure and properties during aerobic granulation

The forming mechanism of non-filamentous sludge bulking during aerobic granulation were investigated basing on three feeding strategies (R1 direct aeration after fast feeding, R2 anaerobic stirring after fast feeding and R3 anaerobic plug-flow slow feeding). Results showed that strong selection stress (shortening settling time) led to a sharp flocs washout and the subsequent increase of food to microorganisms (F/M) in R1 and R3 reactors, but not found in R2 due to the different strategies of feeding modes. With the increase of F/M, zeta potential and hydrophobicity of sludge surfaces significantly decreased and thus leading to an enhanced repulsive force and energy barriers for sludge aggregation. Particularly, when F/M exceeded 1.2 kgCOD/(kgMLSS·d), non-filamentous sludge bulking was ultimately triggered in R1 and R3. Further analysis showed that massive extracellular exopolysaccharide (PS) accumulated on the surfaces of non-filamentous bulking sludge due to the increased abundance of the microorganisms related to PS secretion during sludge bulking. In addition, significantly increased intracellular second messenger (c-di-GMP), a key substance regulating PS biosynthesis, was confirmed via its concentration determination as well as microbial function prediction analysis, which played a critical role in sludge bulking. Combing with the systematic detection from surface plasmon resonance system, rheometer and size-exclusion chromatography-multiangle laser light detection-refractive index system, higher molecular weight, compact conformation, higher viscosity and higher hydrophilicity was determined in sludge bulking PS relative to PS extracted from non-filamentous bulking sludge. Clearly, the changes of PS (content, structures and properties) driven by c-di-GMP are the dominant mechanism for the formation of non-filamentous sludge bulking during aerobic granulation. This work could provide theoretical support for successful start-up and application of aerobic granular sludge technology.

Insight into the Cold Adaptation Mechanism of an Aerobic Denitrifying Bacterium: Bacillus simplex H-b

Psychrophilic bacteria with aerobic denitrification ability have promising potential for application in nitrogen-contaminated wastewater treatment, especially under cold conditions. A better understanding of the cold adaptation mechanism during aerobic denitrification would be beneficial for the practical application of this type of functional bacterium. In this study, Bacillus simplex H-b with good denitrification performance at 5°C was used to investigate the corresponding cold tolerance mechanism. Transcriptomics and nitrogen removal characterization experiments were conducted at different temperatures (5°C, 20°C, and 30°C). At low temperatures, more nitrogen was utilized for assimilation, accompanied by the accumulation of ATP and extracellular polymeric substances (EPS), rather than transforming inorganic nitrogen in the dissimilation pathway. In addition, the proportion of unsaturated fatty acids was higher in strains cultured at low temperatures. At the molecular level, the adjustment of membrane transport, synthesis of cofactors and vitamins, and transcriptional regulators might contribute to the survival of the strain under cold conditions. Moreover, nucleotide precursor synthesis, translation, and oxidative and temperature stress response mechanisms also enhanced the resistance of strain H-b to low temperatures. The results suggest that combining multiple regulatory mechanisms and synergistic adaptation to cold stress enabled the growth and relatively high nitrogen removal rate (27.22%) of strain H-b at 5°C. By clarifying the mechanism of regulation and cold resistance of strain H-b, a theoretical foundation for enhancing the application potential of this functional bacterium for nitrogen-contaminated wastewater treatment was provided. IMPORTANCE The newly isolated aerobic denitrifying bacterium Bacillus simplex H-b removed various forms of inorganic nitrogen (nitrate, nitrite, and ammonium) from wastewater, even when the temperature was as low as 5°C. Although this environmentally functional bacterium has been suggested as a promising candidate for nitrogen-contaminated water treatment at low temperatures, understanding its cold adaptation mechanism during aerobic denitrification is limited. In this study, the cold tolerance mechanism of this strain was comprehensively explained. Furthermore, a theoretical basis for the practical application of this type of functional bacterium for nitrogen removal in cold regions is provided. The study expands our understanding of the survival strategy of psychrophilic bacteria and hence supports their further utilization in wastewater treatment applications.

pH-Dependent Hydrogenotrophic Denitratation Based on Self-Alkalization

Producing stable nitrite is a necessity for anaerobic ammonium oxidation (anammox) but remains a huge challenge. Here, we describe the design and operation of a hydrogenotrophic denitratation system that stably reduced >90% nitrate to nitrite under self-alkaline conditions of pH up to 10.80. Manually lowering the pH to a range of 9.00-10.00 dramatically decreased the nitrate-to-nitrite transformation ratio to <20%, showing a significant role of high pH in denitratation. Metagenomics combined with metatranscriptomics indicated that six microorganisms, including a Thauera member, dominated the community and encoded the various genes responsible for hydrogen oxidation and the complete denitrification process. During denitratation at high pH, transcription of periplasmic genes napA, nirS, and nirK, whose products perform nitrate and nitrite reduction, decreased sharply compared to that under neutral conditions, while narG, encoding a membrane-associated nitrate reductase, remained transcriptionally active, as were genes involved in intracellular proton homeostasis. Together with no reduction in only nitrite-amended samples, these results disproved the electron competition between reductions of nitrate and nitrite but highlighted a lack of protons outside cells constraining biological nitrite reduction. Overall, our study presents a stably efficient strategy for nitrite production and provides a major advance in the understanding of denitratation.

Influence of salinity on biofilm formation and COD removal efficiency in anaerobic moving bed biofilm reactors

Anaerobic digestion is widely used for wastewater treatment, but this approach often relies on microbial communities that are adversely affected by high-salinity conditions. This study investigated the applicability of an anaerobic moving bed biofilm reactor (AMBBR) to treating high-salinity wastewater. The removal performance and microbial community were examined under salinity conditions of 1000-3000 mg/L, and a soluble chemical oxygen demand (sCOD) removal efficiency of up to 8% ± 2.74% was achieved at high-salinity. Scanning electron microscopy showed that microorganisms successfully attached onto the polyvinyl alcohol gel carrier, and the extracellular polymeric substances on the biofilm increased at higher salt concentrations. The AMBBR also maintained traditionally accepted levels of total alkalinity and volatile fatty acids for stable wastewater processing under these operating conditions. High-throughput sequencing indicated that Desulfomicrobium and three methanogenic groups were the dominant contributors to sCOD removal. Overall, the results showed that the AMBBR can successfully treat fish factory wastewater under varying salinity conditions.

Bifunctional lighting/supporting substrate for microalgal photosynthetic biofilm to bio-remove ammonia nitrogen from high turbidity wastewater

Treatment technologies based on microalgal biofilms have an enormous potential for dealing with water pollution because they can efficiently redirect nutrients from wastewater to renewable biomass feedstock. However, poor light transmittance is caused by the high turbidity of wastewater, which hinders the commercial application of microalgal biofilm-based wastewater treatment. Here, a bifunctional substrate with lighting and biofilm support functions was constructed using a light guide plate. In a biofilm photobioreactor (bPBR) with a bifunctional lighting/supporting substrate (BL/S substrate), light can directly irradiate the biofilm to avoid attenuation by the turbid wastewater. Direct irradiation of light onto the biofilm led to a 93.0% enhancement of microalgal photoconversion efficiency when compared to that of a supporting substrate without lighting (SO substrate). Meanwhile, the maximum growth rate of the microalgal biofilm on the BL/S substrate was 8.7 g m^-2 d^-1, which was increased by 60.3%. The removal rate of ammonia nitrogen (NH₄⁺-N) from the digested wastewater contributed by the microalgal biofilm reached 22.6 mg L^-1 d^-1, which was higher than the previously reported that of NH₄⁺-N from turbid digested wastewater by the biofilms. Furthermore, the BL/S substrate can facilitate the secretion of abundant extracellular polymeric substrates, which results in the stable adhesion of the biofilm onto the BL/S substrate. The optical density of the microalgae cells at the outlet of the bPBR with BL/S substrate was below 0.1, which was 94% lower than that of the bPBR with the SO substrate. The results indicated the BL/S substrate may avoid the loss of microalgal biomass, and almost all biomass could be easily harvested from the biofilm for algae-based biomass resources. Consequently, this study can offer a promising alternative with efficient treatment technologies for wastewater with high turbidity.

Polyhydroxyalkanoate-driven current generation via acetate by an anaerobic methanotrophic consortium

Anaerobic oxidation of methane (AOM) is an important microbial process mitigating methane (CH₄) emission from natural sediments. Anaerobic methanotrophic archaea (ANME) have been shown to mediate AOM coupled to the reduction of several compounds, either directly (i.e. nitrate, metal oxides) or in consortia with syntrophic bacterial partners (i.e. sulfate). However, the mechanisms underlying extracellular electron transfer (EET) between ANME and their bacterial partners or external electron acceptors are poorly understood. In this study, we investigated electron and carbon flow for an anaerobic methanotrophic consortium dominated by 'Candidatus Methanoperedens nitroreducens' in a CH₄-fed microbial electrolysis cell (MEC). Acetate was identified as a likely intermediate for the methanotrophic consortium, which stimulated the growth of the known electroactive genus Geobacter. Electrochemical characterization, stoichiometric calculations of the system, along with stable isotope-based assays, revealed that acetate was not produced from CH₄ directly. In the absence of CH₄, current was still generated and the microbial community remained largely unchanged. A substantial portion of the generated current in the absence of CH₄ was linked to the oxidation of the intracellular polyhydroxybutyrate (PHB) and the breakdown of extracellular polymeric substances (EPSs). The ability of 'Ca. M. nitroreducens' to use stored PHB as a carbon and energy source, and its ability to donate acetate as a diffusible electron carrier expands the known metabolic diversity of this lineage that likely underpins its success in natural systems.

Diagnostic Method for Enhancing Nitrogen and Phosphorus Removal in Cyclic Activated Sludge Technology (CAST) Process Wastewater Treatment Plant

Ensuring the stable operation of urban wastewater treatment plants (WWTPs) and achieving energy conservation and emission reduction have become serious problems with the improvement of national requirements for WWTP effluent. Based on a wastewater quality analysis, identification of the contaminant removal, and a simulation and optimization of the wastewater treatment process, a practical engineering diagnosis method for the cyclic activated sludge technology process of WWTPs in China and an optimal control scheme are proposed in this study. Results showed that exceeding the standard of effluent nitrogen and phosphorus due to unreasonable process cycle setting and insufficient influent carbon source is dangerous. The total nitrogen removal rate increased by 9.5% and steadily increased to 67% when agitation was added to the first 40 min of the cycle. Additionally, the total phosphorus (TP) was reduced to 0.27 mg/L after replacing the phosphorus removal agent polyferric sulfate with polyaluminum iron. The corresponding increase in the TP removal rate to 97% resulted in a reduction in the treatment cost by 0.008 CNY/t.

A new inoculation method of sulfur autotrophic denitrification reactor for accelerated start-up and better low-temperature adaption

Elemental sulfur (S⁰) autotrophic denitrification (SAD) has been proved feasible for nitrate removal from aquatic environments. The long start-up period up to weeks of the SAD reactor impedes its industrial application. To accelerate the start-up process, this study employed S⁰ powder packed sequencing batch reactor operated for 10 days to obtain a seed biofilm, which was inoculated into a regular S⁰ flake packed bed reactor afterwards. Merely two days after inoculation, the reactor inoculated with seed biofilm was well started up and outperformed the control reactor, which was inoculated with regular anaerobic sludge and operated for more than 10 days, delivering much increased denitrification rate of 126 ± 0.68 mg N/(L·d) and a high nitrate removal efficiency of 93.0%. Batch tests during the start-up period showed that the seed biofilm developed well on S⁰ flakes and delivered improved nitrate removal performance than the control. Extracellular polymeric substance (EPS) analysis revealed an abundant content of protein in tightly bound EPS in the biofilm developed from the seed biofilm, which was recognized as a major contributor to facilitate the biofilm's attachment and growth onto S⁰ flakes. After operating under moderate temperature, the reactors were tested at a reduced temperature of 15 °C. Results indicated that the reactor inoculated with seed biofilm showed stronger adaptation ability towards low temperature and sustained better denitrification performance than the control, which was attributed to increased protein content in tightly bound EPS produced by the microbes against low-temperature. Determination of the microbial communities in tested reactors when the whole experiment was closing found that sulfur-related genera were dominating in the packed-bed reactor inculcated with seed biofilm, which played an important role in the S⁰-based denitrification process.

Lysozyme regulates the extracellular polymer of activated sludge and promotes the formation of electroactive biofilm

The formation of electroactive biofilm from activated sludge on electrode surface is a key step to construct a bio-electrochemical system, yet it is greatly limited by the poor affinity between the bacteria and the electrode interface. Herein, we report a new method to promote the formation of electroactive biofilm by regulating the extracellular polymeric substance (EPS) content in activated sludge with lysozyme. The investigation of the effect of lysozyme treatment on the content of extracellular polymers and the biofilm formation of electroactive bacteria suggests that lysozyme can improve the permeability of the positive bacterial cell membrane and thus increase the EPS content in the activated sludge. The characterizations of electrochemical activity, surface morphology and community structure of the anode biofilm indicate that increasing EPS content promotes the adhesion of the mixed bacteria in the activated sludge on the electrode and results in denser biofilms with better conductivities. The microbial fuel cell (MFC) inoculated with the sludge of high EPS content exhibits the power density up to 2.195 W/m², much higher than that inoculated with the untreated sludge (1.545 W/m²). The strategy of adjusting EPS content in activated sludge with a biological enzyme can effectively enhance the ability of the bacterial community to form biofilms and exhibits great application potentials in the construction of high efficiency bio-electrochemical systems.

The metabolic patterns of the complete nitrates removal in the biofilm denitrification systems supported by polymer and water-soluble carbon sources as the electron donors

In this study, two denitrification bio-filters adopted polycaprolactone (PCL) and sodium acetate (NaAc) as polymer and water-soluble carbon sources respectively. With the increasing influent nitrate concentrations, NaAc bio-filter always had shorter HRT to achieve complete nitrate removal. Furthermore, the optimal volumetric denitrification rate in NaAc bio-filter was 0.728 g N/(L·d), which was higher than 0.561 g N/(L·d) in PCL bio-filter. For nitrates removal, the costs of bio-filters supported by NaAc and PCL were 24.93 and 120.25 CNY/kg N respectively. Although Proteobacteria in PCL bio-filter was abundant with 83.98%, NaAc bio-filter had better denitrification performance, due to the appropriate ratio of nitrate removal microorganisms and organic matters degradation organisms. The total abundance value of the denitrification genera is NaAc (16.06%) < PCL (41.19%). However, PCL bio-filter had poor denitrification performance, due to the lower adequacy of PCL depolymerization enzymes and the low expression of the key genes for denitrification.

The promotion and inhibition effect of graphene oxide on the process of microbial denitrification at low temperature

This study found that graphene oxide (GO) improved microbial denitrification at low temperatures (~12 °C), and the optimal concentration was 10 mg/L as the removal rate of NO₃-N increased by 17%. At the optimal concentration, GO improved the electron transport system activity of the microbes and enhanced the activity of nitrate reductase and nitrite reductase while exhibited low microbial toxicity. The addition of GO increased the content of tightly bound extracellular polymeric substances (EPS). The results of fluorescence spectrometer indicated that GO accelerated the renewal of bound EPS (B-EPS). Fourier Transform infrared spectroscopy (FTIR) results showed that GO affected the secondary structure of the protein in B-EPS, making B-EPS more hydrophobic and promoting microbial aggregation. B-EPS affected by GO can promote the electron transfer process of microorganisms. However, high concentration (>25 mg/L) of GO may inhibit denitrification by competing for electrons, which was not conducive to denitrification thermodynamically.

Using stable isotope probing and fluorescence spectroscopy to examine the roles of substrate and soluble microbial products in extracellular polymeric substance formation in activated sludge process

In this study, we used stable isotope-labeled soluble microbial products (SMP) and substrates to explore their assimilation into the formation of new biological products (i.e., extracellular polymeric substances and biomass) in two adjacent sequencing batch reactors. The isotope labeling approach along with fluorescence spectroscopy allowed us to distinguish between refractory and labile portions of SMP constituents as well as their roles in the formation of extracellular polymeric substances (EPS). Comparison of SMP fluorescence and the specific UV absorbance values between the two reactors revealed the presence of humic-like aromatic substances in the non-consumable part of SMP, which can be ultimately released as effluent organic matter. Parallel factor analysis modeling of fluorescence spectra showed that the hydrolysis of EPS contents mostly resulted in humic-like components in SMP rather than protein-like components, which were initially abundant in EPS (>80%). From variations in carbon and nitrogen isotopic contents in EPS and biomass, it was found that carbon-containing substrates were enriched faster than their nitrogenous counterparts. The contributions to new EPS formation reached 87.5% for carbon and 60.5% for nitrogen. Meanwhile, the isotopic tracking of the labeled SMP revealed that only 11.0% and 11.9% of carbon and 13.3% and 11.6% of nitrogen from the influent SMP were finally assimilated into EPS and biomass, respectively. In contrast, the isotopic enrichment in SMP was higher (~50%) than that of EPS and biomass, indicating the low bioavailability and refractory nature of the feed SMP. This study proposed a promising approach for estimating the relative contributions of different forms of labile substrate and SMP to the formation of EPS in activated sludge processes. This approach could be suggested as a versatile method for establishing the kinetics, substrate element flow, mass balance on organic substrates and nutrients, as well as for tracking the consumption and uptake pathways of hazardous materials.

Methane in wastewater treatment plants: status, characteristics, and bioconversion feasibility by methane oxidizing bacteria for high value-added chemicals production and wastewater treatment

Methane is a type of renewable fuel that can generate many types of high value-added chemicals, however, besides heat and power production, there is little methane utilization in most of the wastewater treatment plants (WWTPs) all round the world currently. In this review, the status of methane production performance from WWTPs was firstly investigated. Subsequently, based on the identification and classification of methane oxidizing bacteria (MOB), the key enzymes and metabolic pathway of MOB were presented in depth. Then the production, extraction and purification process of high value-added chemicals, including methanol, ectoine, biofuel, bioplastic, methane protein and extracellular polysaccharides, were introduced in detail, which was conducive to understand the bioconversion process of methane. Finally, the use of methane in wastewater treatment process, including nitrogen removal, emerging contaminants removal as well as resource recovery was extensively explored. These findings could provide guidance in the development of sustainable economy and environment, and facilitate biological methane conversion by using MOB in further attempts.

The nitrogen removal characterization of a cold-adapted bacterium: Bacillus simplex H-b

The removal efficacy of biological nitrogen removal process is inhibited by low temperatures. Herein, a psychrotrophic bacterium strain, Bacillus simplex H-b, was isolated and identified with the potential to conduct heterotrophic nitrification and aerobic denitrification in the temperature range from 5 to 37 °C. At 10 °C, the removal efficiencies of initial nitrate-N (63 mg/L), nitrite-N (10 mg/L) and ammonium-N (60 mg/L) were 67.29%, 78.69% and 82.16%, with the maximum removal rate of 0.56, 0.18 and 0.74 mg/L/h, respectively. Additionally, both the accumulation level of ATP (adenosine triphosphate) and the formation of extracellular polymeric substances was found to increase with the decrease of temperature from 37 °C to 10 °C, indicating strain H-b might resist low temperature stress through its cellular extreme environment resistant mechanism and further suggesting the newly isolated strain could serve as a promising candidate for nitrogen contaminated wastewater treatment, especially under low-temperature condition.

Multi-omics analysis reveals structure and function of biofilm microbial communities in a pre-denitrification biofilter

The highly complex microbial communities in biofilm play crucial roles in the pollutant removal performance of wastewater treatment plants (WWTPs). In the present study, using multi-omics analysis, we studied microbial structure, key enzymes, functional traits, and key metabolic pathways of pre-denitrification biofilter in an urban WWTP in China. The analysis results of metagenomic and metaproteomic showed that Betaproteobacteria and Flavobacteriia were dominant in biofilms. The integrated metagenomic and metaproteomic data showed that the expression of nitrogen metabolism genes was high, and the high proportion of denitrification module indicating that denitrification was the main nitrogen removal pathway. The most abundant denitrifying bacterial genera were: Dechloromonas, Acidovorax, Bosea, Polaromonas, and Chryseobacterium. And microorganisms with denitrification potential may not be able to denitrify in the actual operation of the filter. The integrated analysis of metaproteomic and metabolomic showed that there was a correlation between biofilm microorganisms and metabolites. Metabolomic analysis indicated that metabolic profiles of biofilms varied with layer height. This study provides the first detailed microbial communities and metabolic profiles in a full-scale pre-denitrification biofilter and clarifies the mechanism of denitrification.