Rock phosphate solubilization by abiotic and fungal-produced oxalic acid: reaction parameters and bioleaching potential

New approaches for solubilization of phosphate rocks through solid-state fermentation by optimization of oxalic acid production

This study explores the enhancement of phosphate rock (PR) solubilization through solid-state fermentation (SSF) by optimizing oxalic acid production using Aspergillus niger. Key process parameters, including the use of agro-industrial by-products (sugarcane bagasse (SCB), wheat bran (WB), soybean bran (SB)), pH levels, sucrose supplementation, and methanol addition, were systematically evaluated through sequential experimental designs. The results identified SCB and SB in a 1:1 ratio as the most effective substrate. Remarkably, the inclusion of methanol (7 %) and sucrose (0.5 %) resulted in a 3-fold increase in oxalic acid production. Under these optimized conditions, significant phosphorus solubilization of Bayóvar, Itafós, and Registro PRs was achieved, with Bayóvar rock releasing up to 12.1 g/kgds of soluble P (63.8 % efficiency). Additionally, the SSF process effectively released organic phosphorus from the agro-industrial substrates. These findings hold promise for advancing the bio-based economy and developing future industrial biofertilizers.

"Synthesis and characterization of mesoporous V-Mo-MCM-41 nanocatalysts: Enhancing efficiency in oxalic acid synthesis"

Mesoporous V-Mo-MCM-41 nano molecular sieves were synthesized via the direct hydrothermal method, employing tetraethyl orthosilicate (TEOS) as a silica source and cetyltrimethylammonium bromide (CTAB) as a surfactant template. Comprehensive characterization through N2-adsorption (BET), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX) confirmed the mesoporous nature of the catalysts, revealing variations in specific surface area and a significant pore diameter of 6.3 nm, enhancing their versatility for various chemical transformations. The nanoscale structure was further validated through XRD analysis and SEM images. The catalytic efficiency of V-Mo-MCM-41 was demonstrated by synthesizing oxalic acid from molasses, and a response surface methodology (RSM) study on four key variables revealed a maximum yield of 83 % within 1 h using minimal sulfuric acid, showcasing the effectiveness of the prepared catalysts.

Extraction and application of extracellular polymeric substances from fungi

Extracellular polymeric substances (EPS) are extracellular metabolites of microorganisms, highly associated with microbial function, adaptation, and growth. The main compounds in EPS have been revealed to be proteins, polysaccharides, nucleic acids, humic substances, lipids, etc. EPS are not only biomass, but also a biogenic material. EPS have high specific surface, abundant functional groups, and excellent degradability. In addition, they are more extensible to the environment than the microbial cells themselves, which exhibits their huge advantages. Therefore, they have been applied in many fields, such as the environment, ecosystem, basic commodities, and medicine. However, the functions of EPS highly depend on the suitable extraction process, as different extraction methods have different effects on their composition, structure, and function. There are many types of EPS extraction methods, in which physical and chemical methods have been widely utilized. This review summarizes the extraction methods and applications of EPS. In addition, it considers some important gaps in current knowledge, and indicates perspectives of EPS for their future study.

Current overview and future perspective in fungal biorecovery of metals from secondary sources

Microorganisms are intimately involved in many biogeochemical processes that underpin the transformation of metals and cycling of related substances, such as metalloids and radionuclides. Many processes determine the mobility and bioavailability of metals, thereby influencing their transfer to the environment and living organisms. These processes are closely related to global phenomena such as soil formation and bioweathering. In addition to environmental significance, microbial metal transformations play an essential role in both in situ and ex situ bioremediation processes for solid and liquid wastes. The solubilization of heavy metals from industrial waste and soil is commonly used in bioremediation. Moreover, immobilization processes are applicable to bioremediation of metals and radionuclides from aqueous solutions. This review provides an overview of critical metal extraction and recovery from secondary sources, applied microorganisms and methods, metal-microbe interactions, as well as a detailed description of known metal recovery mechanisms.

Oxalic acid: recent developments for cost-effective microbial production

Organic acids are the important compounds that have found numerous applications in various industries. Oxalic acid is one of the important organic acids with different industrial applications. Different microbes have been reported as important sources of various organic acids. Majority of studies have been carried on fungal sources for oxalic acid production. Aspergillus sp. has been found efficient oxalic acid producer. Microbial productions of metabolites including organic acids are considered cost effective and eco-friendly approach over chemical synthesis. Fermentative production of microbial oxalic acid seems to be a good alternative as compared to chemical methods. Microbial production of oxalic acid still requires the extensive and elaborated research for its commercial production from efficient microbes using cost effective substrates. The present text summarizes the production of oxalic acid, its applications and recent developments in the direction of fermentative production of microbial oxalic acid.

Synthesis and characterization of rod-like amino acids/nanohydroxyapatite composites to inhibit osteosarcoma

In this study, rod-like hydroxyapatite (HA) with uniform morphology and controllable particle size modified by doping with two different amino acids (alanine and threonine) was synthesized by a microwave hydrothermal method. The physical and chemical properties of the composites were tested by utilizing X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), general thermogravimetric analysis (TG) and scanning electron microscopy (SEM). The SEM and XRD results show that the presence of amino acids (especially threonine) can significantly reduce the aspect ratio and crystallinity of hydroxyapatite. Pure hydroxyapatite and modified hydroxyapatite doped with two different proportions of amino acids were cultured with mouse osteoblasts (MC3T3-E1) for 1, 3 and 5 days, respectively, nanohydroxyapatite modified by threonine has better biocompatibility compared with pure hydroxyapatite. The amino acid-modified hydroxyapatite samples were co-cultured with osteosarcoma cells (MG63) for 1, 4 and 7 days, respectively, and showed better inhibitory effects on osteosarcoma cells. The nanohydroxyapatite doped with amino acids could be used as a potential drug that promotes bone repair and inhibits the growth of osteosarcoma cells.

Field evaluation of the effect of Aspergillus niger on lettuce growth using conventional measurements and a high-throughput phenotyping method based on aerial images

Plant microbiome engineering is a promising tool to unlock crop productivity potential and exceed the yield obtained with conventional chemical inputs. We studied the effect of Aspergillus niger inoculation on in-field lettuce (Lactuca sativa) growth in soils with limiting and non-limiting P concentrations. Lettuce plants originating from inoculated seeds showed increased plant diameter (6.9%), number of leaves (8.1%), fresh weight (23.9%), and chlorophyll content (3.8%) as compared to non-inoculated ones. Inoculation of the seedling substrate just before transplanting was equally efficient to seed inoculation, while application of a granular formulation at transplanting did not perform well. Plant response to P addition was observed only up to 150 kg P2O5 ha-1, but A. niger inoculation allowed further increments in all vegetative parameters. We also employed a high-throughput phenotyping method based on aerial images, which allowed us to detect changes in plants due to A. niger inoculation. The visible atmospherically resistant index (VARI) produced an accurate prediction model for chlorophyll content, suggesting this method might be used to large-scale surveys of croplands inoculated with beneficial microorganisms. Our findings demonstrate that A. niger inoculation surpasses the yield obtained with conventional chemical inputs, allowing productivity gains not reached by just increasing P doses.

Solubilization of struvite and biorecovery of cerium by Aspergillus niger

Cerium has many modern applications such as in renewable energies and the biosynthesis of nanomaterials. In this research, natural struvite was solubilized by Aspergillus niger and the biomass-free struvite leachate was investigated for its ability to recover cerium. It was shown that struvite was completed solubilized following 2 weeks of fungal growth, which released inorganic phosphate (Pi) from the mineral by the production of oxalic acid. Scanning electron microscopy (SEM) showed that crystals with distinctive morphologies were formed in the natural struvite leachate after mixing with Ce3+. Energy-dispersive X-ray analysis (EDXA), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) confirmed the formation of cerium phosphate hydrate [Ce(PO4)·H2O] at lower Ce concentrations and a mixture of phosphate and cerium oxalate decahydrate [Ce2(C2O4)3·10H2O] at higher Ce concentrations. The formation of these biogenic Ce minerals leads to the removal of > 99% Ce from solution. Thermal decomposition experiments showed that the biogenic Ce phosphates could be transformed into a mixture of CePO4 and CeO2 (cerianite) after heat treatment at 1000 °C. These results provide a new perspective of the fungal biotransformation of soluble REE species using struvite leachate, and also indicate the potential of using the recovered REE as biomaterial precursors with possible applications in the biosynthesis of novel nanomaterials, elemental recycling and biorecovery. KEY POINTS: • Cerium was recovered using a struvite leachate produced by A. niger. • Oxalic acid played a major role in struvite solubilization and Ce phosphate biorecovery. • Resulting nanoscale mineral products could serve as a precursor for Ce oxide synthesis.