Structural and physicochemical properties of soya bean protein isolate/maltodextrin mixture and glycosylation conjugates

Comprehensive structural and functional characterization of a new protein-polysaccharide conjugate between grass pea protein (Lathyrus sativus) and xanthan gum produced by wet heating

The purpose of this work was to use a controlled wet-heating process to promote Maillard reaction (MR) between grass pea protein (GPPI) and xanthan gum (XG), and then analyse structural, functional and antioxidant properties of the conjugate (GPPI-XGCs). During heating, the degree of glycation of all conjugated samples was raised (up to 37.43 %) and, after heating for 24 h, the lightness of the samples decreased by 24.75 %. Circular dichroism showed changes in secondary structure with lower content of α-helix and random coil in conjugates. XRD patterns showed that MR destroyed the crystalline structure of the protein. In addition, Lys and Arg content of the produced conjugates decreased by 16.94 % and 6.17 %, respectively. Functional properties including foaming capacity and stability were increased by 45.17 % and 37.17 %, and solubility reached 98.88 %, due to the protein unfolding driven by MR. GPPI-XGCs showed significantly higher antioxidant activities with maximum ABTS-RS value of 49.57 %. This study revealed how MR can improve GPPI's properties, which can aid the food industry in producing a wide range of plant-based foods. Especially, among other characteristics, the foaming properties were significantly improved and the final product can be introduced as a promising foaming agent to be used in food formulation.

3D printable vegan plant-based meat analogue: Fortification with three different mushrooms, investigation of printability, and characterization

In this study, a meat analogue formulation prepared using different protein sources as a printable ink for 3D printers and fortified with three different mushroom cultivars (reishi, Ganoderma lucidum (GL); saffron milk-cap, Lactarius deliciosus (LD); and oyster, Pleurotus ostreatus (PO)). 3D printing performance of the prepared inks was evaluated by factorial design in terms of nozzle height, printing speed, and flow compensation. New methods of maximum layer height and reprintability of plant-based meat analogues were conducted for the first time. Inks were characterized by analyzing rheological properties, microstructure, color characteristics, texture profile, cooking loss, amino acid content, and sensory evaluation. Results showed that the nozzle height and printing speed were found to be most effective on accuracy of prints and smoothness of layers. All inks (C, GL, LD and PO) represented shear-thinning and gel-like viscoelastic behavior (G' > G″) with predominant elasticity (tan δ < 1). Therefore they were suited for 3D printing and possessed supporting the following layers for additive manufacturing as well as meeting the criteria for a stable structure. Meat analogue was printed successfully without perceived defects in all formulations, except the GL was looking linty. LD and PO inks brought the advantage of recycling as a result of their re-printability whereas GL could not. Moreover, mushroom fortification reduced hardness, stiffness, springiness, and chewiness properties of the meat analogues whereas it increased the juiciness with reasonable overall acceptance. Mushroom fortification also enhanced the nutritional value and improved release of umami amino acids. The findings of the study demonstrated that mushrooms could be a functional and nutritious candidate for 3D printable plant-based meat analogues.

Modified Structural and Functional Properties of Fish Gelatin by Glycosylation with Galacto-Oligosaccharides

This study aimed to investigate the effects of galacto-oligogalactose (GOS) glycosylation on the structural and functional properties of fish gelatin (FG). Results showed that with the increase of glycosylation time, grafting degree and browning increased, and new protein bands with increased molecular weight were observed by SDS-PAGE. Structural analysis showed that glycosylation reduced intrinsic fluorescence intensity and increased surface hydrophobicity of FG. FTIR analysis showed α-helix content decreased while random coil content increased in glycosylated FG. Emulsion activity index and emulsion stability index along with foam activity and foam stability were significantly elevated in GOS-4 and GOS-8, but FG glycosylated longer than 12 h exhibited less pronounced improvement. Glycosylated FG showed lower gel strength than control. The results indicate that moderate glycosylation could be applied to improve interfacial properties of FG.

A novel approach for the development of edible oleofoams using double network oleogelation systems

Whipped oleogels (oleofoams) are commonly stabilized by crystalline particles. Still, external factors like temperature fluctuations could change the state of the crystals (phase transitions), leading to the destabilization and disruption of oleofoams. Herein, a double network oleogelation system comprised of a primary crystalline network (using glycerol monostearate) and a secondary colloidal network (stabilized by soy protein isolate-anionic polysaccharides Mailard conjugates) is proposed as a novel strategy to overcome these challenges. It was observed that the incorporation of the secondary network resulted in a lower over-run, but a higher melting point, elasticity, foam stability, and more uniform bubble size distribution. This was explained by the strong interfacial stabilization provided by the colloidal network that can protect the crystalline particle against coarsening and oil drainage. These double network oleofoams, which could retain 41-48 % air (oleogel-based), display great potential for utilization in low-calorie lipid-based products.

Interactions of soy protein isolate with common and waxy corn starches and their effects on acid-induced cold gelation properties of complexes

Soy protein isolate (SPI) was mixed with different concentrations of common starch (CS) and waxy starch (WS) from corn. The interactions of SPI with CS or WS and their effects on the acid-induced cold gelation properties of complexes were investigated. Compared with WS, SPI could bind to CS more strongly and formed a tighter SPI-CS non-covalent complex, which resulted in the increased β-sheet and a more ordered secondary structure. The gel strength, water holding capacity (WHC), viscoelasticity, hydrophobic interactions and thermal stability of SPI-CS complex gels were enhanced as increasing CS concentration, and the complex with 2% of CS had the best gelation properties. Although adding WS reduced the gel strength, rheological properties and hydrophobic interactions of SPI-WS complex gels, it improved the WHC and thermal stability of the complex gels. Therefore, CS had a broader effect on improving acid-induced cold gelation properties of SPI than WS.

Improving Pea Protein Emulsifying Capacity by Glycosylation to Prepare High-Internal-Phase Emulsions

Pea protein has been extensively studied because of its high nutritional value, low allergenicity, environmental sustainability, and low cost. However, the use of pea protein in some food products is hindered due to the low functionality of pea protein, especially as an emulsifier. High-internal-phase emulsions (HIPEs) are attracting attention because of their potential application in the replacement of hydrogenated plastic fats in foods. In this study, the use of glycated pea protein isolate (PPI) as an emulsifier to prepare HIPEs is proposed. The functionalization of a commercial PPI in two ratios of maltodextrin (MD) (1:1 and 1:2) via glycosylation (15 and 30 min), to act as an emulsifier in HIPEs, is investigated. HIPE properties, such as oil loss and texture, were evaluated and related to microstructural properties. Glycated-PPI-stabilized HIPEs showed high consistency, firmness, viscosity, and cohesiveness values; a tight and homogeneous structure; and physical stability throughout storage. The results showed that emulsions were more stable when using a 1:2 ratio and 30 min of heat treatment. However, the reaction time was more determinant for improving the textural properties when a 1:1 ratio was used for glycosylation than when a 1:2 ratio was used. Glycosylation with MD via the Maillard reaction is a suitable method to enhance the emulsifying and stabilizing properties of PPI.

Changes in partial properties of glycosylated egg white powder during storage

BACKGROUND

Glycosylation is an effective method to modify protein. However, there is a lack of research on the property changes of glycosylated protein during storage. In the present study, the changes in the physicochemical, functional, and structural properties of xylo-oligosaccharide (XOS) glycosylated egg white powder (EWP) (XOS-EWP conjugates) prepared with different glycosylation conditions (XOS/EWP ratio and reaction time) were investigated when stored at 25 °C and 60% relative humidity.

RESULTS

In the 12 weeks of storage, the degree of grafting, browning, and the formation of Maillard reaction products of XOS-EWP conjugates increased. The increase in XOS/EWP ratio and reaction time led to an increase in protein aggregation, though a decrease in solubility, due to increased degree of glycosylation and structural changes. Furthermore, improved gel hardness of XOS-EWP conjugates deteriorated, while improved emulsification ability was kept stable during storage. For the sample with a lower XOS/EWP ratio and reaction time, the gel hardness and emulsifying properties underwent little or no deterioration even improving during storage. The results could be attributed to the limited degree of glycosylation, further unfolding of the protein structure, increased surface hydrophobicity of protein, and improved thermal characteristics.

CONCLUSION

During storage, the Maillard reaction would continue to occur in the glycosylated EWP, further affecting the performance of modified EWP. Modified EWP prepared under different glycosylation conditions performed differently during storage. Modified EWP with a larger XOS/EWP ratio and reaction time meant it was harder to maintain good performance. Modified EWP with a smaller XOS/EWP ratio and reaction time changed significantly to better performances. © 2022 Society of Chemical Industry.

Dissecting the essential role of N-glycosylation in catalytic performance of xanthan lyase

Modified xanthan produced by xanthan lyase has broad application prospects in the food industry. However, the catalytic performance of xanthan lyase still needs to be improved through rational design. To address this problem, in this work, the glycosylation and its influences on the catalytic performance of a xanthan lyase (EcXly), which was heterologously expressed in Escherichia coli, were reported. Liquid chromatography coupled to tandem mass spectrometry analysis revealed that the N599 site of EcXly was modified by a single N-glycan chain. Based on sequence alignment and three-dimensional structure prediction, it could be deduced that the N599 site was located in the catalytic domain of EcXly and in close proximity to the catalytic residues. After site-directed mutagenesis of N599 with alanine, aspartic acid and glycine, respectively, the EcXly and its mutants were characterized and compared. The results demonstrated that elimination of the N-glycosylation had diminished the specific activity, pH stability, and substrate affinity of EcXly. Fluorescence spectra further revealed that the glycosylation could significantly affect the overall tertiary structure of EcXly. Therefore, in prokaryotic hosts, the N-glycosylation could influence the catalytic performance of the enzyme by changing its structure. To the best of our knowledge, this is the first report about the post-translational modification of xanthan lyase in prokaryotes. Overall, our work enriched research on the role of glycan chains in the functional performance of proteins expressed in prokaryotes and should be valuable for the rational design of xanthan lyase to produce modified xanthan for industrial application.

Ultra-stable high internal phase emulsions stabilized by protein-anionic polysaccharide Maillard conjugates

This paper reports the production of O/W high internal phase emulsions (HIPEs) using protein-anionic polysaccharide Maillard conjugates. First, Maillard conjugates were prepared from soy protein isolate (SPI) or sodium caseinate (SC) proteins and Alyssum homolocarpum seed gum (AHSG) or kappa-carrageenan (kC) polysaccharides. The conjugation process was confirmed and monitored by UV spectrophotometry, Fourier transform infrared, circular dichroism, fluorescence spectroscopies, and differential scanning calorimetry. Under the optimized reaction conditions, SC-AHSG conjugates exhibited the highest glycation degree and emulsifying properties. Next, HIPEs were made using the optimized conjugates, and their microstructure, droplet size, and physical stability were evaluated. The emulsion stabilized by SC-AHSG conjugate had the lowest mean droplet size (363.07 ± 34.56 nm), orderly-packed oil droplets with monomodal distribution, the highest zeta potential (-27.70 ± 0.70 mV), high storage stability (no creaming or oil-off) and was ultra-stable against environmental stresses. Results of this research are helpful for development of emulsion-based foods with novel functionality.

Gellan gum conjugation with soy protein via Maillard-driven molecular interactions and subsequent clustering lead to conjugates with tuned technological functionality

•

Soy protein isolate (SPI) was conjugated to low acyl gellan gum (LAGG).

•

Conjugate formation was confirmed by glycation degree (DG) and structural changes.

•

SPI-LAGG conjugates were classified into low, medium, and high DG clusters.

•

A low DG was enough to enhance the techno-functional properties of SPI.

Soy proteins are frequently used in the food industry; however, they have rigid and compact structure with relatively poor interfacial properties and solubility. This study was therefore aimed to modify techno-functional characteristics of soy protein isolate (SPI; 0.1% w/v) by conjugating to low acyl gellan gum (LAGG; 0.1, 0.2, and 0.3% w/v), through the Maillard reaction (at 90 °C for 90 min). The SPI-LAGG conjugates were confirmed by changes in pH, glycation degree (DG; up to 48%), Fourier transform infrared spectroscopy, and sodium dodecyl sulphate polyacrylamide electrophoresis. The conjugates were then classified into three clusters of low, medium, and high DG, via K-means clustering method. The low DG conjugate had lower surface hydrophobicity and foaming capacity, and higher thermal stability, solubility, emulsifying properties, foam stability, and antioxidant activity compared to the other clusters. This indicated that a low DG is required to enhance the functional properties of proteins.

Effects of Different Amounts of Corn Silk Polysaccharide on the Structure and Function of Peanut Protein Isolate Glycosylation Products

Covalent complexes of peanut protein isolate (PPI) and corn silk polysaccharide (CSP) (PPI-CSP) were prepared using an ultrasonic-assisted moist heat method to improve the functional properties of peanut protein isolate. The properties of the complexes were affected by the level of corn silk polysaccharide. By increasing the polysaccharide addition, the grafting degree first increased, and then tended to be flat (the highest was 38.85%); the foaming, foam stability, and solubility were also significantly improved. In a neutral buffer, the solubility of the sample with a protein/polysaccharide ratio of 2:1 was 73.69%, which was 1.61 times higher than that of PPI. As compared with PPI, the complexes had higher thermal stability and lower surface hydrophobicity. High addition of CSP could made the secondary structure of PPI change from ordered α-helix to disordered β-sheet, β-turn, and random coil structure, and the complex conformation become more flexible and loose. The results of multiple light scattering showed that the composite solution exhibited high stability, which could be beneficial to industrial processing, storage, and transportation. Therefore, the functional properties of peanut protein isolate glycosylation products could be regulated by controlling the amount of polysaccharide added.

Impact of glycation on physical properties of composite gluten/zein nanofibrous films fabricated by blending electrospinning

In this study, the gluten/zein nanofibrous films were fabricated by blending electrospinning and then glycated with xylose via Maillard reaction. The average fiber diameter of the gluten film decreased from 551 to 343 nm with the increasing ratio of zein, but increased significantly to a range of 717-521 nm after glycation, which induced a higher thermal stability of the nanofibers with an order to disorder transition. The glycated composite films showed the reduced water vapor permeability and improved water stability with a stiffer and more elastic network structure, due to the enhanced intermolecular entanglements and interactions between polymer chains. The results from this work suggested that the composite gluten/zein electrospun films may be glycated via Maillard reaction to obtain desirable physical properties for active food-packaging applications.