Use of cone-beam computed tomography to evaluate root and canal morphology of mandibular molars in Chinese individuals

Autophagy regulates bone loss via the RANKL/RANK/OPG axis in an experimental rat apical periodontitis model

AIM

Autophagy is involved in human apical periodontitis (AP). However, it is not clear whether autophagy is protective or destructive in bone loss via the receptor activator of nuclear factor-κB ligand (RANKL)/RANK/osteoprotegerin (OPG) axis. This study aimed to investigate the involvement of autophagy via the RANKL/RANK/OPG axis during the development of AP in an experimental rat model.

METHODOLOGY

Twenty-four female Sprague-Dawley rats were divided into control, experimental AP (EAP) + saline, and EAP + 3-methyladenine (An autophagy inhibitor, 3-MA) groups. The control group did not receive any treatment. The EAP + saline group and the EAP + 3-MA group received intraperitoneal injections of saline and 3-MA, respectively, starting 1 week after the pulp was exposed. Specimens were collected for microcomputed tomography (micro-CT) scanning, histological processing, and immunostaining to examine the expression of light chain 3 beta (LC3B), RANK, RANKL, and OPG. Data were analysed using one-way analysis of variance (p < .05).

RESULTS

Micro-CT showed greater bone loss in the EAP + 3-MA group than in the EAP + saline group, indicated by an elevated trabecular space (Tb.Sp) (p < .05). Inflammatory cell infiltration was observed in the EAP + saline and EAP + 3-MA groups. Compared with EAP + saline group, the EAP + 3-MA group showed weaker expression of LC3B (p < .01) and OPG (p < .05), more intense expression of RANK (p < .01) and RANKL (p < .01), and a higher RANKL/OPG ratio (p < .05).

CONCLUSION

Autophagy may exert a protective effect against AP by regulating the RANKL/RANK/OPG axis, thereby inhibiting excessive bone loss.

Root canal widths of mandibular molars in predicting the legal age threshold 18 years in a sample of juveniles and sub-adults of south-indian origin: an orthopantomographic study

Pursuing a proficient age estimation methodology introducing novel radiographic methods remains an ongoing and demanding aspect of forensic and medicolegal research. In 2017, Roberts GJ et al. (J Forensic Sci 62(2):351-4, 2017) described a new radiographic method, i.e., root canal width (RCW) patterns to assign a subject to above 18-year-age threshold. Since then, few researchers have investigated the validity of this radiographic method in other populations. The present study aimed to test the usefulness of these RCW patterns in predicting 18 years in a sample of South Indian juveniles and sub-adults aged between 16 and 23. Descriptive analysis revealed that pattern-A was initially observed at a minimum age of 16.08 and 16.22 years in males and females. Pattern-B at 16.31 years in males and 16.22 years in females, while pattern-C was initially recorded at 18.73 years in males and 19.01 years in females, respectively. In summary, if an individual, regardless of sex, exhibits a fully-formed (apex closed) mandibular first, second, and third molars and concurrently displays RCW-C, there is a strong likelihood that the person has exceeded the legally relevant age of 18 years. However, due to higher rate of technically unacceptable errors (adults wrongly identified as individuals below 18 years), reliance on this method alone should be restricted, and it is advisable to combine it with other methods.

The Assessment of C-shaped Canal Prevalence in Mandibular Second Molars Using Endodontic Microscopy and Cone Beam Computed Tomography: An In Vivo Investigation

Background Understanding root canal anatomy variations, particularly C-shaped canals, is crucial for successful endodontic treatment. This study used clinical and radiographic methods to assess the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Materials and methods This prospective study was conducted in the western region of Maharashtra, India. The samples included patients requiring endodontic treatment for mandibular second molars. Clinical evaluation was conducted using a surgical endodontic microscope and cone beam computed tomography (CBCT) imaging. Inclusion and exclusion criteria ensured the selection of a focused and homogeneous sample. Data analysis included assessment of unilateral/bilateral occurrence, canal distribution, and cross-sectional characteristics. Results Out of 200 mandibular second molars, 7.5% exhibited C-shaped root canals, with no significant gender differences. Canal distribution varied across coronal, middle, and apical levels, with prevalent configurations being C1, C2, C3, and C4. No significant differences were observed in canal distribution based on root levels. No significant gender differences were found in the presence of grooves on the root surfaces. Conclusion This study provides valuable insights into the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Further research into histological and genetic aspects can enhance our understanding, leading to improved treatment strategies for complex root canal anatomy variations.

Application of personalized templates in minimally invasive management of coronal dens invaginatus: a report of two cases

BACKGROUND

Treating the coronal dens invaginatus (CDI) with pulp infection commonly involves the removal of invagination, which increases the risk of perforation and fracture, and compromises the tooth structure. Minimally invasive endodontic management of CDI is highly recommended. This report describes two cases of type II CDI with the application of personalized templates.

CASE PRESENTATION

Two cases of type II CDI, affecting the main root canal in a maxillary canine and a lateral incisor, were diagnosed. A guided endodontics (GE) approach was applied. Cone-beam computed tomography and intraoral scans were imported and aligned in a virtual planning software to design debridement routes and templates. The MICRO principle (which involves the aspects of Mechanical (M) debridement, Irrigation (I), Access cavities (C), Rectilinear routes (R), and Obstruction (O)) was proposed for designing optimal debridement routes for future applications. The templates were innovatively personalized and designed to preserve the tooth structure maximally while effectively debriding the root canal. Root canal treatment with supplementary disinfection was then performed. The follow-up of the two patients revealed favorable clinical and radiographic outcomes.

CONCLUSIONS

The GE approach could be a feasible method for preserving healthy dental structure while effectively debriding the root canal, thereby achieving successful and minimally invasive endodontic treatment for CDI.

A systematic review and meta-analysis of the prevalence and global distribution of middle mesial canals in mandibular molars identified by CBCT

OBJECTIVES

This systematic review and meta-analysis aimed to evaluate the prevalence of middle mesial canal (MMC) in permanent mandibular molars of different populations and regions based on cone-beam computed tomography (CBCT) studies.

MATERIALS AND METHODS

PubMed, Scopus, Embase, Web of Science, and Open-Grey were searched up to October 2023 according to specific keywords. A hand search was conducted on the references of the included studies and articles from three peer-reviewed journals in endodontics. The main variable of interest was the prevalence of MMC. Additional data such as the total number of included cases, age and country of the population, CBCT device information, voxel size, and field of view details were also extracted. Extracted data were analyzed qualitatively with the JBI quality assessment checklist and quantitatively with STATA software.

RESULTS

Of 32,793 studied teeth, the cumulative prevalence of MMC in both mandibular 1st and 2nd molars was 3.11% (95% CI: 2.00-4.44%). The subgroup analysis reveals a prevalence of 4.15% (95% CI: 2.69-5.89%) for mandibular 1st molars and 1.2% (95% CI: 0.2-2.83%) for mandibular 2nd molars. The highest prevalence of MMC in 1st molar was attributed to South Asia (11.24%) and Africa (6.61%).

CONCLUSIONS

The prevalence of MMC varies among regions. Clinicians should be aware of the potential prevalence of MMC, particularly in mandibular first molars, as a missed MMC could result in endodontic failure.

CLINICAL RELEVANCE

The presence of MMCs varies in different geographic regions (0% to 29.7%). Clinicians should always look for MMC when doing an endodontic treatment on mandibular molars, as the presence of this canal is not uncommon. We suggest searching for this canal as if searching for the second mesiobuccal canal of maxillary 1st molars.

Radix entomolaris and radix paramolaris: A cone-beam computed tomography study of permanent mandibular molars in a large sample from Slovenia

OBJECTIVES

To investigate the prevalence, unilateral/bilateral concurrency, and external morphology of permanent mandibular molars (PMMs) with radix entomolaris (RE) and radix paramolaris (RP) in a sample from Slovenia.

DESIGN

Medium field-of-view cone-beam computed tomography images of 1315 participants (681 males, 634 females) aged 13-90 years (mean age 45.5) were retrospectively examined. A total of 1363 first, 1824 second, and 1314 third PMMs were evaluated. The external morphology of the affected teeth was categorized according to Carlsen and Alexandersen's classifications.

RESULTS

The individual-level RE frequencies in the first, second, and third PMMs were 1.6%, 1.9%, and 10.1%, respectively. The respective RP frequencies were 0%, 1.8%, and 3.2%. The first PMMs exclusively exhibited type A RE morphology, whereas in the second and third PMMs, types B and AC morphologies predominated. Bilateral concurrence rates were low (0-7.1%), with the exception of type A RE in first PMMs (62.5%). RE occurrences in the first and second PMMs were correlated (odds ratio = 70.2; 95% confidence interval 17.4 -282.7; P < 0.001). In concurrent cases, the second PMM followed its anterior neighbor in expressing type A morphology, and conversely, all affected second PMMs standing next to a two-rooted first PMM exhibited non-type A morphology.

CONCLUSIONS

In this sample, the first and second PMMs exhibited low supernumerary root frequencies comparable to those of other European samples. The third PMM was most often affected. The presence of RE on the first PMM increased the possibility of its presence on the adjacent second PMM and vice versa.

Pudilan Keyanning mouthwash inhibits dextran-dependent aggregation and biofilm organization of Streptococcus mutans

AIMS

This research aimed to investigate the inhibitory effects of Pudilan mouthwash (PDL) on Streptococcus mutans (S. mutans) biofilms and identify its chemical components.

METHODS AND RESULTS

The impacts of 100% concentrated PDL on S. mutans biofilm were detected by colony-forming unit (CFU) assays, crystal violet staining, confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and quantitative real-time PCR (qRT‒PCR). The biocompatibility with human gingival fibroblasts (HGFs) was evaluated by Cell-Counting-Kit-8 (CCK-8) assay. And chemical components were identified by UPLC-HRMS. PBS and 0.12% chlorhexidine were used as negative and positive controls, respectively. Results indicate early 8-h S. mutans biofilms are sensitive to PDL. Additionally, it leads to a decrease in bacterial activities and dextran-dependent aggregation in 24-h S. mutans biofilms. PDL significantly downregulates the gene expression of gtfB/C/D and smc. And 114 components are identified.

CONCLUSIONS

PDL has an inhibitory effect on S. mutans and favorable biocompatibility. It has potential to be exploited as a novel anti-biofilm agent.

A Cone Beam Computed Tomography-Based Investigation of the Frequency and Pattern of Radix Entomolaris in the Saudi Arabian Population

Background and Objectives: An understanding of the anatomical complexity of teeth is a significant factor for a successful endodontic treatment outcome. The aim of this study was to explore the frequency and pattern of distribution of radix entomolaris (RE) in mandibular first molars (MFMs) of a Saudi Arabian subpopulation using CBCT scans. Materials and Methods: This study was conducted at dental clinics of Qassim University from February to May 2023 by evaluating CBCT scans that were previously obtained for diagnostic purposes. Scans of Saudi national patients with bilaterally present MFMs and fully formed root apices were included. Conversely, scans with one/or two missing MFMs, MFMs with incomplete root apices, full- or partial-coverage prosthesis, endodontic treatment, and associated radicular resorption were excluded from study. A total of 303 CBCT scans with 606 bilateral MFMs were analyzed by two calibrated evaluators for the presence of, and type according to Song's typolgy of RE. The data were analyzed using SPPS-24. The descriptive variables were documented as frequencies and percentages. The chi-square test was used to determine the association between the prevalence of RE with the gender, jaw side and age group. Both inter-rater and intra-rater agreements were estimated for detecting and classifying RE using Cohen's kappa test. Results: The sample had 63.7% males and 36.3% females. The prevalence of RE was 6.6%, with Song's type III (57.5%) as the most common variant. Absolute agreement was noted between the raters about the presence of RE and very strong agreement was noted for the classification of the RE. Conclusions: RE is an uncommon finding among the mandibular first molars of the Saudi population without any gender and quadrant predilection. The clinicians' knowledge of the presence and Song's type of RE may contribute towards the enhancement of endodontic treatment outcomes.

Assessment of the root filling volume in C-shaped root canal on cone-beam CT and micro-CT in relation to nano-CT

AIM

To assess the observed volume of filled C-shaped root canals from different CBCT and micro-CT having nano-CT as a reference.

MATERIALS AND METHODS

Twelve extracted mandibular molars with C-shaped root canals were endodontically treated using Reciproc Blue R25 (VDW GMBH, Munich, Germany) in a reciprocating system and filled with gutta-percha (Dentsply Maillefer) and AH Plus sealer (Dentsply DeTrey, Konstanz, Germany). CBCT scans were performed using 3 units-3D Accuitomo 170 (J. Morita, Kyoto, Japan), ProMax 3D Max (Planmeca, Helsinki, Finland), and NewTom VGi EVO (Cefla QR, Verona, Italy)-at two resolution modes: standard and high. Micro-CT and nano-CT scans were also obtained. The volume of all filled C-shaped root canals was obtained using CTAn software (Bruker, Kontich, Belgium), and the blooming artifact, in relation to nano-CT volume, was calculated. The data were evaluated by the Bland-Altman plots and ANOVA two-way for repeated measures (α = 0.05).

RESULTS

All CBCT units and micro-CT showed significantly larger observed volume of root canal filling when compared to nano-CT. The blooming artifact of root canal filling in standard resolution was significantly larger than that in high resolution (p < 0.05) in all CBCT units.

CONCLUSIONS

Endodontic filling material with AH Plus sealer causes blooming artifacts in CBCT units and micro-CT.

CLINICAL RELEVANCE

Considering the anatomical complexity of C-shaped root canals and the challenges associated with endodontic treatment, CBCT is frequently recommended for follow-up evaluations. However, the presence of endodontic filling material can result in blooming artifacts that may potentially impact the accurate diagnosis of endodontic complications.

Prevalence and Morphology of C-Shaped Canals in Mandibular First and Second Molars of an Iranian Population: A Cone-Beam Computed Tomography Assessment

Objectives

The complex anatomy of C-shaped canals poses challenges for clinicians compared to teeth with normal root canal anatomy. This study is aimed at evaluating the frequency and morphology of C-shaped canals in the mandibular first and second molars among an Iranian population using cone-beam computed tomography (CBCT).

Materials and Methods

This cross-sectional study evaluated 369 CBCT scans from the archives of a radiology clinic in Ardabil, Iran. The sample included 248 mandibular first molars and 478 mandibular second molars. The presence of C-shaped canals and their classification, according to Fan et al., were evaluated at four levels: orifice, coronal, middle, and apical. Prevalence based on gender and tooth type was also assessed.

Results

A total of 199 (53.9%) males and 170 (46.1%) females were evaluated. C-shaped canals were found in 11 (8 males/3 females) out of 248 (4.4%) first molars and in 20 (11 males/9 females) out of 478 (3.7%) second molars. The C2 configuration was most prevalent in the orifice, coronal, and middle levels of both molar types, while C3 and C4 morphologies were most commonly found apically in the second and first molars, respectively. A significant difference in configuration was found only at the coronal level between molar types. A significant association between gender and configuration was observed only at the orifice level of the second molars. No other significant differences were found (P > 0.05).

Conclusion

C-shaped canal configurations should be expected in 4.4% of mandibular first molars and 3.7% of the second molars in this Iranian population, with a predominance of the C2 configuration in the orifice, coronal, and middle levels.

Prevalence of C-shaped canals and three-rooted mandibular molars in the Iranian population by using cone-beam computed tomography

OBJECTIVES

This study aimed to evaluate the prevalence of C-shaped canals and three-rooted mandibular molars in the Iranian population using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

This study evaluated mandibular teeth on 292 CBCT scans of patients referred to the Department of Radiology, Faculty of Dentistry, Islamic Azad University, Isfahan, Iran. All CBCT scans were obtained with the same three-dimensional CBCT scanner, and sections were reconstructed in all three planes (sagittal, axial, and coronal) with 1 mm slice thickness. A total of 291,402, and 200 first, second, and third molars, respectively, were evaluated. Data were analyzed using SPSS software (version 26.0).

RESULTS

Of 291 mandibular first molars, 0.7% were single-rooted, 96.6% were two-rooted, and 2.7% were three-rooted. The prevalence of C-shaped canals was 1.7% in mandibular first molars. Of 402 mandibular second molars, 8.5% were single-rooted, 90.5% were two-rooted, and 1% were three-rooted. The prevalence of C-shaped canals was 2% in mandibular second molars. Of 200 mandibular third molars, 21.5% were single-rooted, 77.5% were two-rooted, and 1% were three-rooted. The prevalence of C-shaped canals was 2% in mandibular third molars.

CONCLUSION

In the present study, the majority of mandibular molars were two-rooted, and three-rooted mandibular molars were less common. The third and second mandibular molars both had an increased prevalence of C-shaped canals. Mandibular first molars had the highest prevalence of three-rooted molars.

Investigation of mandibular second molar root and canal morphology in a Black South African population using cone-beam computed tomography and two classification systems

PURPOSE

To investigate the root and canal morphology of mandibular second molars, including anatomical variations, in a Black South African population using two classification systems.

METHODS

Cone-beam computed tomography images of 386 teeth were evaluated. The number of roots and canal configurations were categorized using the classifications of Vertucci (with modifications by Sert and Bayirli) and Ahmed et al. (including the modified Melton classification). Relationships between variables were assessed using Fisher's exact test (P < 0.05).

RESULTS

Mandibular second molars were predominantly two-rooted (91.7%). The majority of teeth had three canals including Type IV mesial (41.2%) and Type I (75.1%) distal (Ahmed et al. configuration: 2MDM M2 D1). Three or more canals were present in almost one-fifth of mesial (n = 72/386, 18.6%) and a small number of distal (n = 21/386, 5.4%) roots. Males displayed additional canals more frequently in the distal root (P = 0.02). C-shaped anatomy was found in 5.7%. Among the C-shapes, the most common was Melton's Type III in the coronal (50%), middle (81%) and apical (72%) thirds.

CONCLUSION

In this population, mandibular second molar teeth exhibited diverse morphology, which would have clinical significance for endodontic practitioners. The Ahmed et al. classification provided a better description than the Vertucci classification.

Root and canal anatomy of mandibular first molars using micro-computed tomography: a systematic review

BACKGROUND

A thorough understanding of root and canal anatomy is crucial for successful root canal treatment outcomes. This systematic review aims to explore the published micro-CT studies investigated the anatomy of root and canal system in permanent mandibular first molars.

METHOD

An electronic search was performed on Web of science, PubMed, and Scopus. Micro-CT journal studies investigated the root and canal anatomy of permanent double-rooted mandibular first molars were included. Data on study characteristics, objectives of interest, specifications of the studies, and micro-CT specifications were extracted. Risk of bias assessment (ROB) of the included studies was performed using Anatomical Quality Assessment (AQUA) tool. The extracted data were presented in tables and figures to present and synthesise the results. A meta-analysis was performed for the studies related to the prevalence of Vertucci's canal configurations, middle mesial canal (MMC) configurations, and Fan's isthmus types.

RESULTS

Amongst 1358 identified studies, thirty met the inclusion criteria. In terms of the objectives, the selected studies showed high anatomical variability in mandibular first molars. Twenty-two (73%), 25 (83%), and 12 (40%) of the studies reported the population/ethnicity, micro-CT specifications, and ethical approval, respectively. 28 (93%) studies did not disclose the method of sample size estimation. In only 6 (20%) of the studies, the authors had calibrated the assessment approaches. Mostly, a potential ROB was reported in domain 1 (objective(s) and subject characteristics) and domain 3 (methodology characterization). Whilst, low risk was reported in domains 2 (study design), 4 (descriptive anatomy), and 5 (reporting of results). The overall ROB was reported to be ''moderate'' in the vast majority of the studies (27/30). Meta-analysis results showed high levels of heterogeneity among the studies related to MMCs (I² = 86%) and Fan's isthmus (I² = 87%). As for the root canal configuration, pooled prevalence showed that Vertucci type IV and type I were the most prevalent in mesial and distal root canals, respectively.

CONCLUSION

Based on moderate risk of bias level of evidence, micro-CT studies have shown wide range of qualitative and quantitative data presentations of the roots and canals in mandibular first molars. Protocol and registration. The protocol of this systematic review was prospectively registered in the Open Science Framework database ( https://osf.io ) on 2022-06-20 with the registration number 10.17605/OSF.IO/EZP7K.

Evaluation of root and canal morphology of mandibular premolar amongst Saudi subpopulation using the new system of classification: a CBCT study

BACKGROUND

The clinician should have complete knowledge of the normal anatomy of the root as well as complexities in the root canal configuration for a better outcome, as missed or improper handling of the canal system can lead to the failure of an entire endodontic procedure. The present study aims to assess the morphology of roots and canals in permanent mandibular premolars in the Saudi subpopulation with a new classification system.

METHODS

The present study includes 1230 mandibular premolars (645 first premolars and 585-second premolars) from 500 CBCT images of the patients, including retrospective data. iCAT scanner system (Imaging Sciences International, Hatfield, PA, USA) was used to obtain the images; scanning of 8 × 8 cm images was performed at 120 KVp and 5-7 mA with a voxel size of 0.2 mm. The new method of classification presented by Ahmed et al. 2017 was used to record and classify the root canal morphology, followed by recording the differences regarding the age and gender of the patients. Comparison of canal morphology in lower permanent premolars and its association with gender and age of the patients was done by Chi-square test/ Fisher exact test; the significance level was set at 5% (p ≤ 0.05).

RESULTS

The left mandibular 1st and 2nd premolars with one root were 47.31%, with two roots were 2.19%. However, three roots (0.24%) and C-shaped canals (0.24%) were reported only in the left mandibular 2nd premolar. The right mandibular 1st and 2nd premolars with one root were 47.56%, with two roots were 2.03%. The overall percentage of the number of roots and canals in the first and second premolars ¹ PM ¹ (88.38%), ² PM ¹ B ¹ L ¹ (3.5%), ² PM B ¹ L ¹ (0.65%), ¹ PM ^1-2-1 (3.08%), ¹ PM ^1-2 (3.17%), ¹ PM ^1-2-1-2 (0.24%), ³ PMMB ¹ DB ¹ L¹ (0.48%). However, the C-shaped canals (0.40%) were reported in right and left mandibular second premolars. No statistically significant difference was reported between mandibular premolars and gender. A statistically significant difference was reported between mandibular premolars and the age of the study subjects.

CONCLUSION

Type I (¹ TN ¹) was the major root canal configuration in permanent mandibular premolars, which was higher among males. The CBCT imaging provides thorough details about the root canal morphology of lower premolars. These findings could support diagnosis, decision-making, and root canal treatment, for dental professionals.

The global prevalence of middle mesial canal in mandibular first and second molars assessed by cone beam computed tomography: A systematic review and meta-analysis

BACKGROUND

This meta-analysis sought to identify the in vivo prevalence and influencing factors of middle mesial canal (MMC) in mandibular first and second molars based on cone-beam computed tomography (CBCT) scans.

METHODS

MEDLINE/PubMed, Web of Science, Scopus, SciELO, Google Scholar databases/search engines were searched in period between 15^th and 21^st November 2022, to retrieve the in vivo CBCT-based studies that assessed the prevalence of MMC in mandibular first and/or second molars. The studies were strictly assessed using pre-defined inclusion and exclusion criteria for relevancy and eligibility through screening the title and abstract, and then assessed through reading the full texts using the same criteria. Subsequently, the fulfilled studies were assessed qualitatively using the Newcastle-Ottawa Quality Assessment Scale, and quantitatively using meta-analysis to calculate the pooled prevalence rates of MMC. The publication bias was assessed using funnel plot and Egger's test.

RESULTS

Out of 1,122 studies, 33 studies comprised 13,349 and 7,624 mandibular first and second molars, respectively, were eligible for inclusion. Twenty studies scored high quality, while thirteen scored moderate quality. The global prevalence of MMC in the first molar was 4.4% (95% CI = 0.035-0.053, P<0.001), significantly higher than that of the second molar which was 1.3% (95%, CI = 0.008-0.018, P<0.001). Gender, molar side, and age were not influencing factors of MMC prevalence.

CONCLUSION

The prevalence of MMC is not uncommon, being higher in the mandibular first molar compared to the mandibular second molar. The prevalence of MMC is not influenced by age, molar's side, and gender.

Root and canal morphology of mandibular second molars in an Egyptian subpopulation: a cone-beam computed tomography study

BACKGROUND

This study was using Cone beam computed tomography (CBCT) to examine the anatomical variations in mandibular second molars in an Egyptian sub-population.

METHODS

A total of 350 CBCT images (215 females and 135 males, aged 15-65 years) of mandibular second molars were evaluated. Samples were evaluated in terms of: number of roots, number of root canals, roots' cross section as well as prevalence and configurations of C-shaped canals. Statistical analysis was done to highlight differences between different categories and their prevalence among genders (significance level was set at p < 0.05). Data were presented as frequency and percentage values and were analyzed using chi square test followed by pairwise comparisons utilizing multiple Fisher's exact tests with Bonferroni correction. The significance level was set at p < 0.05 within all tests.

RESULTS

Of the 350 mandibular second molars evaluated, 87.2% were non-C-shaped while 12.8% were C-shaped with no gender-based statistically significant differences (χ2 = 0.19, p = 0.656). Most samples had three root canals (80%) followed by two (16%), then one (3.2%), and finally four (0.8%) root canals. Among the non-C-shaped molars, presence of two roots was most common (83.4%) followed by presence of a single root (16.2%), and only one sample (0.2%) had three roots, and this had no correlation with gender (χ2 = 1.86, p = 0.431). In the mesial roots Type IV Vertucci was the most common configuration found (68.8%), while Type I was the most prevalent in the distal roots (91.8%). The long oval configuration was the most commonly found cross section in mesial roots while "oval" was the most prevalent in distal roots.

CONCLUSION

Egyptian sub-population shows highly variable morphological features in mandibular second molars, hence, CBCT is highly recommended on case-to-case conditions.

Characterizations of three-dimensional root morphology and topological location of mandibular third molars by cone-beam computed tomography

PURPOSE

This study aimed to delineate three-dimensional (3D) root morphology and topological locations of mandibular third molars (MTMs) by cone-beam computed tomography (CBCT) in a Chinese adult dental population.

METHODS

Adult patients with MTMs were retrospectively screened based on CBCT images at our institution between January 2018 and December 2019. Root morphology and spatial locations of these teeth were defined based on CBCT 3D images. Potential associations with epidemiological and clinical/radiological parameters were analyzed using Chi-square or Fisher exact test. Two-tailed P values less than 0.05 were considered statistically significant.

RESULTS

A total number of 2680 eligible patients (male/female:0.74; 35 ± 10 years old) with 4180 MTMs were enrolled. The majority of MTMs had 2 roots 3064 (73.30%), followed by 800 (19.14%) 1 root, 302 (7.22%) 3 roots, and 14 (0.33%) 4 roots. More than half of one-rooted MTMs were convergent, followed by club-shaped and C-shaped. Among MTMs with 2 roots, 2860 (93.34%) were M-D (mesio-distal) types. Most MTMs with 3 roots were M-2D (one root in mesial, two roots in distal) types, followed by 2M-D (two roots in mesial, one root in distal) types, and B-2L (one root in buccal, two roots in lingual) types. The presence of root configurations was significantly associated with the angulation, depth, and width classification in two-rooted MTMs (P < 0.05).

CONCLUSIONS

Although the morphology and spatial locations of MTMs vary greatly, our results from a large dental population reconfirm that most MTMs have two roots with mesial-distal type of spatial distribution.

A Chinese herb preparation, honokiol, inhibits Streptococcus mutans biofilm formation

OBJECTIVE

This study aimed to investigate the antibiofilm and anticariogenic effects of honokiol, a traditional Chinese medicine, on the cariogenic bacterium Streptococcus mutans (S. mutans).

DESIGN

The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of honokiol on S. mutans UA159 were measured. Then, S. mutans were treated with honokiol at concentrations of 1/2 MIC and 1/4 MIC. Extracellular polysaccharide (EPS) synthesis was assessed with confocal laser scanning microscopy (CLSM) and the anthrone-sulfuric method. Crystal violet staining and scanning electron microscopy (SEM) were used to demonstrate the characteristics and morphology of S. mutans biofilms. Colony-forming unit (CFU) assay was performed to observe the antibacterial effect of honokiol. Lactic acid production of 24-h biofilms was measured by the lactic acid assay. The expression level of caries-related genes (gtfB/C/D, comD/E and ldh) was identified by quantitative real-time PCR (qRTPCR) to explore the relevant mechanism. And the cytotoxic effect on human gingival fibroblasts (HGFs) was evaluated by the Cell Counting Kit-8 (CCK-8) assay.

RESULTS

The MIC and MBC of honokiol on S. mutans were 30 μg/mL and 60 μg/mL, respectively. Honokiol inhibited biofilm formation, EPS synthesis and lactic acid production. It also decreased the expression of glucosyltransferases (Gtfs) and quorum sensing (QS) system encoding genes. Moreover, honokiol showed favorable biocompatibility with HGFs.

CONCLUSIONS

Honokiol has an inhibitory effect on S. mutans and favorable biocompatibility, with application potential as a novel anticaries agent.

Prevalence of Second Root and Root Canal in Mandibular and Maxillary Premolars Based on Two Classification Systems in Sub-Population of Northern Region (Saudi Arabia) Assessed Using Cone Beam Computed Tomography (CBCT): A Retrospective Study

The objective of this paper is to assess the prevalence of a second canal in maxillary and mandibular premolars based on two classification systems of root canal morphology using Cone beam computed tomography (CBCT) images. A total of 286 CBCT scans from the archive of the Radiology department of a hospital were assessed for the presence of a second canal in maxillary and mandibular premolars. The canal configuration and its assessment was undertaken using Vertucci and Ahmed's classification. A Chi-square test was used to test the significance of the difference between gender and age. A total of 286 premolars were examined (217 mandibular premolars and 69 maxillary premolars); of these, 173 teeth (60.5%) were from males and 113 were from females (39.5%). Some 62% of maxillary left first premolars had two roots, followed by maxillary right first premolars (47%), and then maxillary left second premolars (30%) and maxillary right ones (27%), respectively. Type IV Vertucci were seen in maxillary premolars, while type I were ordinarily seen in the included mandibular premolars. Surprisingly, Vertucci type III was only found in mandibular left first premolars at a frequency of 2%. One orifice with two separate canals and two orifices of two distinct canals with two portals of exit were predominantly noticed with maxillary first premolars (² FP B¹ P¹) in 73% and 81%, respectively, followed by (¹ FP ²) 19%. The prevalence of a second canal in maxillary and mandibular premolars was low in the investigated premolars in comparison to the premolars that had just one root and canal, as assessed based on Vertucci and Ahmed's root canal system classification.

Radix molaris is a hidden truth of mandibular first permanent molars: A descriptive- analytic study using cone beam computed tomography

BACKGROUND

Cone-beam computed tomography (CBCT) could be more beneficial in clinical situations that involve the determination of root canal morphology.

AIM

The aim of the study was to ascertain the prevalence of radix molaris (paramolaris-RP and entomolaris-RE) in a subpopulation of Saudi Arabia using CBCT.

METHOD

A total of 700 CBCT scans of mandibular permanent first molars were included in this study. All CBCT scans were interpreted by two trained dentists and an endodontist. Mandibular permanent first molars with fully developed roots and closed apices were only included. Computed Tomography scans were obtained from the dental college record. The anatomic characteristics which were checked included: the prevalence of radix molaris in both RE and RP and the prevalence of radix molaris according to the patient's gender and age. All CBCT images were processed and reconstructed using OnDemand3DTM imaging software.

RESULTS

Of the 700 patients included, 651 (93.0%) did not have radix molaris, 46 (6.6%) had radix entomolaris and 3 (0.4%) had radix paramolaris in the study group. There was no statistically significant difference between the genders and age in the incidence of RE and RP (P-value < 0.05).

CONCLUSION

The study showed that RE prevalence is more compared to RP in the first lower molars in the population studied. It is important to identify extra roots and associated canals to perform successful root canal treatment and avoid failure.

Cone-beam computed tomographic evaluation of the root canal anatomy of the lower premolars and molars in a Brazilian sub-population

Purpose

This study evaluated anatomical variations in the root canals of the lower premolars and molars in a Brazilian sub-population using cone-beam computed tomography (CBCT).

Materials and Methods

In total, 121 CBCT images of patients were selected from a database. All images contained lower first and second premolars and molars on both sides of the arch, fully developed roots, and no treatment, resorption, or calcifications. In each image, the root canals of the lower premolars and molars were evaluated according to the Vertucci classification in On-Demand 3D software in the multiplanar reconstruction with dynamic navigation. Twenty-five percent of the images were re-assessed to analyze intraobserver confidence with the kappa test. Data were statistically evaluated with linear regression to evaluate the correlations of anatomic variations with age and sex, and the Wilcoxon test to analyze the laterality of variations, with a significance level of 5%.

Results

The intraobserver agreement (0.94) was excellent. In general, the root canals of lower premolars and molars showed a higher prevalence of type I than other Vertucci classification types, followed by type V in premolars and type II in molars. When the molar roots were evaluated separately, type II was more frequent in mesial roots and type I in distal roots. Although age showed no correlations with the results, sex and laterality showed correlations with tooth 45 and the lower second premolars, respectively.

Conclusion

The lower premolars and molars of a Brazilian sub-population showed a wide range of root canal anatomic variations.

The morphology of the pulp chamber floor of permanent mandibular first and second molars in an Indian subpopulation-a descriptive cross-sectional study employing Pawar and Singh classification

Background

Mandibular molars are multi-rooted teeth with a complex and strenuous root canal anatomy. Because there is relatively negligible literature describing the pulp chamber floor anatomy, predicting the exact anatomical layout and its variations is daunting. A thorough comprehension and knowledge of the same is required for efficacious endodontic treatment consequence. The purpose of this study was to characterise and ascertain the pulp chamber floor anatomy of permanent mandibular first (ManFMs) and second (ManSMs) molars in an Indian population.

Methods

On 2,134 extracted human mandibular first (ManFMs = 1,067) and second molars (ManSMs = 1,067), a descriptive cross-sectional investigation was executed. Cleaning and removal of hard and soft tissue debris were performed, followed by flattening the anatomical crown until the pupal architecture was uncovered. A stereomicroscope with a magnification of 4.5 magnification was used to investigate the pulpal anatomy. Statistical analysis was carried out using chi square test, with 95% confidence intervals and a p value of 0.05 considered statistically significant.

Results

The majority of the ManFMs showed presence of three canal orifices in 57.73%, followed by four orifices 31.31%, five orifices 8.81%, and six orifices 2.15%. For ManSMs, majorly three orifices were found in 39.83% specimens, followed by two orifices in 37.39%, four orifices in 16.31%, and single root canal orifice was observed in 6.47%. The mesio-buccal, mesio-lingual, disto-buccal, disto-lingual canal orifices exhibited round and oval shapes in both ManFMs and ManSMs. The shape was predominantly oval with a single distal canal orifice (84.25% ManFMs and 74.16% ManSMs). In ManSMs, among the single root canal orifice, 66.66% were round in shape and 33.34% were C-shaped. In ManSMs with two root canal orifices, mesially 79.44% exhibited oval and 20.56% round shape. Distally, 74.16% were oval and 25.84% were round. The shapes of the access cavities for ManFMs were rectangular in 46.67% and triangular in 53.33%. For the ManSMs, the access cavities were triangular in 39.83%, rectangular in 16.31% and non-classified (others) in 43.86% of specimen. In both ManFMs and ManSMs, the pulp chamber floor morphology was predominately Y shaped (57.73% and 39.83%) according to the Pawar and Singh classification© of pulp chamber floor anatomy.

Conclusion

Our study indicated that the orifices on the pulp chamber floor are arranged in a typical manner, supporting the proposed categorization. Furthermore, description of the anatomical patterns of the pulp chamber guides the clinicians in chair-side treatment decisions.

Prevalence and correlation of C-shaped root canals of mandibular premolars and molars in Eastern Chinese individuals

The aim of this study was to investigate the prevalence, correlation, and differences of C-shaped root canals (CSRCs) morphology in permanent mandibular premolars and molars in Eastern Chinese individuals using cone-beam computed tomography (CBCT). A total of 8000 mandibular first premolars (MFPs), mandibular second premolars (MSPs), mandibular first molars (MFMs), and mandibular second molars (MSMs) CBCT images from 1000 patients (692 females and 308 males) were collected. The prevalence, correlation, bilateral/unilateral presence, the morphology of CSRCs, level of canal bifurcation, gender differences, and location of radicular grooves (RGs) were evaluated. The prevalence of CSRCs in MFPs, MSPs, MFMs and MSMs were 10.25%, 0.25%, 0.55% and 47.05%, respectively. The prevalence of CSRCs in MFPs of males was higher than that in females, while the prevalence of CSRCs in MSMs of females was higher than that in males (P < 0.05). The bilateral symmetry presence of CSRCs in MSMs was significant but not in MFPs, MSPs, and MFMs. RGs were predominantly found on the mesiolingual (ML) surface of premolars and the lingual surface of molars. There was a high prevalence of CSRCs in MFPs and MSMs in the Eastern Chinese population, but there was no correlation. The prevalence of CSRCs in MFPs and MSMs differ significantly by gender (P < 0.05).

A lightweight convolutional neural network model with receptive field block for C-shaped root canal detection in mandibular second molars

Rapid and accurate detection of a C-shaped root canal on mandibular second molars can assist dentists in diagnosis and treatment. Oral panoramic radiography is one of the most effective methods of determining the root canal of teeth. There are already some traditional methods based on deep learning to learn the characteristics of C-shaped root canal tooth images. However, previous studies have shown that the accuracy of detecting the C-shaped root canal still needs to be improved. And it is not suitable for implementing these network structures with limited hardware resources. In this paper, a new lightweight convolutional neural network is designed, which combined with receptive field block (RFB) for optimizing feature extraction. In order to optimize the hardware resource requirements of the model, a lightweight, multi-branch, convolutional neural network model was developed in this study. To improve the feature extraction ability of the model for C-shaped root canal tooth images, RFB has been merged with this model. RFB has achieved excellent results in target detection and classification. In the multiscale receptive field block, some small convolution kernels are used to replace the large convolution kernels, which allows the model to extract detailed features and reduce the computational complexity. Finally, the accuracy and area under receiver operating characteristics curve (AUC) values of C-shaped root canals on the image data of our mandibular second molars were 0.9838 and 0.996, respectively. The results show that the deep learning model proposed in this paper is more accurate and has lower computational complexity than many other similar studies. In addition, score-weighted class activation maps (Score-CAM) were generated to localize the internal structure that contributed to the predictions.

A CBCT based cross sectional study on the prevalence and anatomical feature of C shaped molar among Jordanian

The prevalence and anatomical features of C-Shaped Mandibular Second Molars (MSMs) are rarely studied in Jordanian sub-population. This study then took a part to evaluate the prevalence of C-shaped in MSMs using cone-beam computed tomography (CBCT) in the Jordanian sub-population. It used a cross-sectional design and three thousand scans collected over eight years between 2011 and 2019. The data were then reviewed for whether they were fully formed of MSMs. A total of 2037 cases that had 2845 MSMs were evaluated to identify C-shaped canals at coronal, middle, and apical sites. An oblique slicing module perpendicular to the long axis of MSMs was used to evaluate the teeth. The type and frequency of C-shaped canals, as well as the correlations between sex and side (right/left) and between sex and groove direction (buccal/lingual) were measured using the chi-square test on SPSS software at the significance level of 95%. A total of 342 teeth of 243 patients were C-shaped molars, which comprised 12% of the patient's teeth and 99 of them as a bilateral C-shaped canal with mean age of 40 years and sex ratio of 2:1 between female and male. With the limitations of this study, the lingual groove and type 3 were the most common properties of MSM. Besides, the Jordanian population mostly had C-shaped canals.

RNase III coding genes modulate the cross-kingdom biofilm of Streptococcus mutans and Candida albicans

Streptococcus mutans constantly coexists with Candida albicans in plaque biofilms of early childhood caries (ECC). The progression of ECC can be influenced by the interactions between S. mutans and C. albicans through exopolysaccharides (EPS). Our previous studies have shown that rnc, the gene encoding ribonuclease III (RNase III), is implicated in the cariogenicity of S. mutans by regulating EPS metabolism. The DCR1 gene in C. albicans encodes the sole functional RNase III and is capable of producing non-coding RNAs. However, whether rnc or DCR1 can regulate the structure or cariogenic virulence of the cross-kingdom biofilm of S. mutans and C. albicans is not yet well understood. By using gene disruption or overexpression assays, this study aims to investigate the roles of rnc and DCR1 in modulating the biological characteristics of dual-species biofilms of S. mutans and C. albicans and to reveal the molecular mechanism of regulation. The morphology, biomass, EPS content, and lactic acid production of the dual-species biofilm were assessed. Quantitative real-time polymerase chain reaction (qRT-PCR) and transcriptomic profiling were performed to unravel the alteration of C. albicans virulence. We found that both rnc and DCR1 could regulate the biological traits of cross-kingdom biofilms. The rnc gene prominently contributed to the formation of dual-species biofilms by positively modulating the extracellular polysaccharide synthesis, leading to increased biomass, biofilm roughness, and acid production. Changes in the microecological system probably impacted the virulence as well as polysaccharide or pyruvate metabolism pathways of C. albicans, which facilitated the assembly of a cariogenic cross-kingdom biofilm and the generation of an augmented acidic milieu. These results may provide an avenue for exploring new targets for the effective prevention and treatment of ECC.

Root canal width as a mandibular maturity marker at the 18-year threshold in the Maltese population

INTRODUCTION

The determination of age of majority (the 18-year-old threshold) using the popular Demirjian tooth staging method is unreliable, so other maturity markers are required. This study examines whether the ratio of the root canal widths (RCW) of the mandibular first, second and third molars is a useful indicator of age.

METHODS

Nine hundred eighteen dental panoramic radiographs (DPT) were examined and the ratio of the mid-points of the distal roots of the left mandibular first, second and third molars assessed according to the RCW stages as described by Roberts (J Forensic Sci 62:351-354, 2017).

RESULTS

Individuals who had reached stages RCW-A and RCW-B were represented in a wide range of ages spanning the 18-year-old threshold. Individuals who had reached Stage RCW-C were all above the 18-year-old threshold. It was not possible to analyse a large number of DPTs for various reasons.

DISCUSSION

Individuals categorised as stage RCW-C may be deemed to have reached the 18-year-old threshold. These results are consistent with other published studies. Variation in root morphology and in the rate of development of the third molar limits the applicability of this method.

CONCLUSIONS

RCW staging is an accurate method of determining the 18-year-old threshold. Its limited applicability requires the use of substitute markers in a large number of cases.

Evaluation of Radix Entomolaris and Middle Mesial Canal in Mandibular Permanent First Molars in an Iraqi Subpopulation Using Cone-Beam Computed Tomography

The aim of this study was to evaluate the radix entomolaris (RE) and middle mesial canal (MMC) in mandibular permanent first molars in an Iraqi subpopulation using cone-beam computed tomography (CBCT). Their prevalence and types were investigated in 201 patients (301 tooth subjects), among which 156 were of the right side, and 145 of the left side mandibular first molars (MFM), using CBCT scans. The effects of gender, age, and unilateral/bilateral on the presence of both RE and MMC were evaluated. Chi-square and Fisher's exact tests were used to determine the level of significance (p ≤ 0.05), and the kappa value was used to check reliability of results of the research. In MFM, the prevalence of right and left RE was 4.5% and 4.1%, respectively, and it was significantly higher in males than females (p = 0.006) based on the Chi-square test. No significant difference was identified in the prevalence of RE in relation to age and tooth position. MMC was found in 14.7% of teeth in the right side and 19.3% in the left side, with no significant differences for age or gender. MMC merged with mesiolingual canal presented with higher prevalence compared to other types of MMC (8.3% right side and 7.6% left side), again with no significant differences for age or gender. Within the limits of this study, no significant association was detected between the prevalence of MMC and RE in MFM.

Variations of root and canal morphology of mandibular second molars in Chinese individuals: a cone-beam computed tomography study

BACKGROUND

The mandibular second molars demonstrate variations on root and canal morphology. The aim of this study was to investigate all the root canal morphology of mandibular second molars and analyze the morphological variations in patients by gender and age in a Chinese population use CBCT imaging.

METHODS

Cone-beam computed tomographic images of 1200 bilateral mandibular second molars were obtained from 600 patients (300 females and 300 males) who required a preoperative assessment for implant surgery, surgical removal of impacted teeth, orthodontic treatment, surgery of maxillofacial tumour and cysts or LeFort I osteotomy. CBCT images were divided into 5 groups according to age: "15-24 years", "25-34 years", "35-44 years", "45-54 years" and "≥ 55 years"; and 2 groups by gender: "females" and "males". The following information were recorded: the number of roots and canals and their morphology, the frequency and configuration of C-shaped canals by gender, age and position (left and right). The chi-square test was used to analyse differences between groups. P value of < 0.05 was considered statistically significant.

RESULTS

Of the 1200 teeth, 61% had two separate roots located mesiodistally, 35.6% had one C-shaped root. The 45.3% teeth had three canals in two-rooted mandibular second molars. The mesial root showed a Vertucci type II configuration in 28.9% cases followed by type IV(24.4%). While the distal root showed a significant higher prevalence of type I configuration in 95.6%. In the examined 1200 teeth, 430 teeth (35.8%) had C-shaped root canals. The prevalence of C-shaped root canal systems was significantly higher in females (42.5%) than in males (29.1%) (P = 0.000), and did not differ with age (P = 0.126). The 80.4% C-shaped canals were bilateral (P = 0.000) and did not differ with side (left and right) (P = 0.758).

CONCLUSIONS

The most commonly observed root morphology for the mandibular second molars was 2 separate roots with three canals.The prevalence of C-shaped root canal is 35.8% and is more higher in females than in males.

Comprehensive evaluation of root and root canal morphology of mandibular second molars in a Saudi subpopulation evaluated by cone-beam computed tomography

BACKGROUND

The study's goal was to use Cone Beam Computed Tomography (CBCT) to assess the root and root canal anatomy of mandibular second molars with C-shaped root canal configurations in residents of the Hail district. The impact of gender and side on the frequency of root canal morphology was considered.

METHODS

The sample size for this study was 304 untreated mandibular second molars with completely developed roots on the right and left sides. Using CBCT on the teeth, the root form and canal morphology for each root are based on Vertucci's classification. The occurrence of canals in the shape of a C. The prevalence and resemblance of the left and right sides or men and females were investigated. The Chi-square test was performed to evaluate the findings.

RESULTS

Of the 304 mandibular second molars studied, 286 teeth had two roots (94.1%), whilst 13 (4.3%) were C-shaped root canal systems. 77 molars (25.3%) had two canal orifices, 219 (72.0%) had three canal orifices, and six (2.0%) and one (0.3%) had four and five root canal orifices, respectively. Type IV was the most common for mesial root, accounting for 57.7% of the sample (n = 176). For distal root, the most common occurrence was type I, which occurred 282 times (96.60%). The most prevalent root canal morphology was the presence of two canals in the mesial root and one canal in the distal root of teeth with two distinct roots (variant 3). (69.4%). The overall prevalence of C-shaped root canal systems is (4.3%) (n = 13).

CONCLUSIONS

The patient's race is an undeniable factor that influences root canal anatomy. The root canal morphology of mandibular second molars revealed significant differences between Saudi subpopulations. The majority of mandibular second molars had two roots and three root canals. When treating these molars, the presence of a C-shaped root canal system must be taken into account.

Radiographic Investigation of Root Canal Morphology of Permanent Mandibular Molars in Makkah Population (Saudi Arabia) Using Cone-Beam Computed Tomography

Objectives

This study aimed to analyze the root canal morphology of first and second permanent mandibular molars among Makkah population by using cone-beam computed tomography (CBCT).

Materials and Methods

CBCT images of two hundred eight patients were obtained from the Faculty of Dentistry, Umm Al-Qura University, Makkah, Saudi Arabia. In all images, mandibular first and second molars were evaluated for the number of roots and their morphology, number of root canals, canal configuration in each root according to Vertucci's classification, and the presence of a C-shaped canal.

Results

Most of the mandibular first molars had two roots (96.5%) and three root canals (77.7%). Type IV canal configuration prevailed (75.6%) in the mesial roots, and type I canal configuration prevailed (71.7%) in the distal roots. For the mandibular second molars, the majority had two roots (96.3%) and three root canals (82.7%). Type IV canal configuration prevailed (48%) in the mesial roots and type I (99.1%) in the distal roots. C-shaped canals were detected in 5.7% of the mandibular first molars and 4% of the mandibular second molars. There was no statistical difference between the mandibular first and second molars (P > 0.05) in the shape of the roots and the presence of the C-shaped canals.

Conclusion

Most of the mandibular molars in Makkah population presented with two roots and three root canals. The incidence of three-rooted mandibular molars was low, and it was higher in the first molars than second molars. The type IV root canal system prevailed in mesial roots and type I in distal roots.

Three-Rooted Permanent Mandibular First Molars: A Meta-Analysis of Prevalence

Introduction

Although numerous amounts of high-level evidence were present, they solely emphasized the tooth-level prevalence of three-rooted permanent mandibular first molar. Global patient-level prevalence and bilateral symmetrical distribution of this type of teeth were needed to be tackled across the world. The research question was “What is the global prevalence of three-rooted permanent mandibular first molars?”

Materials and Methods

In vivo epidemiological studies undergone with Cone Beam Computed Tomography (CBCT) were eligible. The proportions of the prevalence of three-rooted permanent mandibular first molars were presented in the forest plots by random effect model. The calculation was performed with MetaXL version 5.3. Subgroup analysis, sensitivity analysis, and publication bias method were also calculated.

Results

Seventy-two studies from 31 countries were selected for both qualitative and quantitative analyses. 26302 patients and 37994 permanent mandibular first molars were included in the analysis. 9% of permanent mandibular first molars all over the world demonstrated 3 roots. These three-rooted teeth were found in 10% of the world population, more than 45% of which revealed bilateral symmetry of that anatomy. Right-side dominance and no sexual dimorphism were seen in the distribution of three-rooted permanent mandibular first molars. Global tooth-level prevalence of Radix Entomolaris and Radix Paramolaris was 12% and 0.1%, respectively.

Conclusion

The prevalence of three-rooted permanent mandibular first molars (PMFMs) was influenced by different geographical locations across the world and also by widespread habitation of the Mongoloid descent. The authors postulate that globalization, together with blending among ethnicities, may have a great impact on the reduction or accentuation of the anatomical significance in some populations.

Three-dimensional analysis of coronal root canal morphology of 136 permanent mandibular first molars by micro-computed tomography

Background/purpose

Minimally invasive endodontic approach become a research hotspot and may prevent the fracture of endodontically-treated teeth. This research aims to measure the coronal root canal morphology of permanent mandibular first molars in 3D and propose a new minimally invasive endodontic approach based on this measurement.

Materials and methods

Data of 136 permanent mandibular first molars were involved and reconstructed in 3D models with canals. Then, the morphology characteristics of the coronal root canal were measured.

Results

Overall, the distribution of root canal orifices was more centralized than other landmarks. The landmarks were located more mesiobuccally to the center of the occlusal plane of molars. Specifically, the measurements of the maximum curvature of coronal root canals in the axial direction were: in 3-canals 2-rooted teeth, the average angles of curvatures were 23°,25°,11° for mesiobuccal (MB), mesiolingual (ML) and distobuccal (DB) canals, respectively; in 4-canals 2-rooted teeth were 23°,25°,12°,16°for MB, ML, DB, and distolingual (DL) canals, respectively; in 4-canals 3-rooted teeth were 25°,27°,17°,39° for MB, ML, DB, and DL canals, respectively. The degrees of coronal root canal curvatures in the horizontal direction were: in 3-canals teeth, the average angles of curvatures were −1°,47°,-2° for MB, ML and DB canals, respectively; in 4-canals 2-rooted teeth were −4°,41°,-25°,48° for MB, ML, DB, and DL canals, respectively; in 4-canals 3-rooted teeth were −3°,33°,-43°,79° for MB, ML, DB, and DL canals, respectively.

Conclusion

The results of this study are similar to those previously obtained using CBCT and can help us design endodontic approaches.

Evaluation of mesial root canal configuration of mandibular first molars using micro-computed tomography

Purpose

The aim of this study was to evaluate the root canal morphology of mesial roots of mandibular first molars.

Materials and Methods

Forty extracted mandibular first molars were used in this study. The morphological examination of root canals was conducted in accordance with the Vertucci classification using micro-computed tomography (micro-CT). Any aberrant root canal configurations not included in the Vertucci classification were recorded, and their frequency was established using descriptive statistics. Intra-observer reliability was assessed using the Wilcoxon signed-rank test, while inter-observer reliability was assessed using the Cohen kappa test. Significance was evaluated at the P<0.05 level.

Results

The mesial roots of mandibular first molars had canal configurations of type I (15%), type II (7.5%), type III (25%), type IV (10%), type V (2.5%), type VI (7.5%), and type VII (7.5%). The images showed 10 (25%) additional configuration types that were not included in the Vertucci classification. These types were 1-3-2-3, 1-2-3-2-3, 2-3-1, 2-3, 1-2-3-1, 2-1-2-3, 3-2-1, 1-2-3-1, 2-3-2-3, and 1-2-1-2-1. The intra-observer differences were not statistically significant (P>0.05) and the kappa value for inter-observer agreement was found to be 0.957.

Conclusion

Frequent variations were detected in mesial roots of mandibular first molars. Clinicians should take into consideration the complex structure of the root canal morphology before commencing root canal treatment procedures to prevent iatrogenic complications. Micro-CT was a highly suitable method to provide accurate 3-dimensional visualizations of root canal morphology.

Atypical Radicular Anatomy in Permanent Human Teeth: A Systematic Review

The aim of the present study is to classify and quantify the anatomical variations of teeth in terms of form and number of root canals reported in human teeth employing the classification systems proposed previously. An electronic (PubMed) and manual search were performed to identify case reports noting any of the anatomical variations. Each alteration was studied independently. The electronic search was performed using the following keywords: anatomical aberration, root canal, permanent Dentition, case report, c-shaped canal, dens invaginatus, palato-radicular groove, palato-radicular groove, palato-gingival groove, radix entomolaris, dental fusion, dental gemination, taurodontism, dilaceration. The initial search revealed 1497 papers, of which 938 were excluded after analyzing the titles and abstracts. Therefore, 559 potential papers were considered. Of those, 140 articles did not meet the inclusion criteria. For the final revision, 419 papers were considered. We found that the mandibular first premolar had the highest prevalence of C-shaped canals. Dens invaginatus was more frequently found in the mandibular lateral incisor. Taurodontism was more prevalent in the maxillary first molar and in the mandibular first molar. Dilaceration was not clearly associated with a particular tooth. The classifications systems used in this review allowed for the better understanding and analysis of the many anatomical variations present in teeth. The variations in shape most found were dens invaginatus and radix entomolaris. The most frequently reported anatomical variation was in the number of canals.

Worldwide Assessment of the Mandibular First Molar Second Distal Root and Root Canal: A Cross-sectional Study with Meta-analysis

INTRODUCTION

This study assessed the prevalence of radix entomolaris and 2 canals at the distal aspect of mandibular first molars among different geographic regions by means of cone-beam computed tomographic imaging.

METHODS

Precalibrated observers from 23 worldwide geographic locations followed a standardized screening protocol to assess 5750 cone-beam computed tomographic images of mandibular first molars (250 per region), gathering demographic data and recording the presence of radix entomolaris and a second canal at the distal aspect of teeth. Intra- and interrater reliability tests were conducted and comparisons among groups were performed using proportions and odds ratio forest plots. The significance level was set at 5%.

RESULTS

The results of intra- and interrater tests were above 0.79. The prevalence of radix entomolaris varied from 0.9% in Venezuela (95% confidence interval [CI], 0%-1.9%) to 22.4% in China (95% CI, 17.2%-27.6%). Regarding the proportion of a second distal canal, it ranged from 16.4% in Venezuela (95% CI, 11.8%-21.0%) to 60.0% in Egypt (95% CI, 53.9%-66.1%). The East Asia subgroup was associated with a significantly higher prevalence of an extra distolingual root, whereas the American subgroup, the American native ethnic group, and elderly patients were linked to significantly lower percentages of a second canal at the distal aspect of teeth. No significant differences were noted between male or female patients.

CONCLUSIONS

The overall worldwide prevalence rates of radix entomolaris and a second canal at the distal aspect of the mandibular first molar were 5.6% and 36.9%, respectively. The East Asia geographic region and Asian ethnic group had a higher prevalence of a second distal root.

Root form and canal anatomy of maxillary first premolars: a cone-beam computed tomography study

The aim of this study was to evaluate the root and canal morphology of permanent maxillary first premolars in a Polish population using cone-beam computed tomography scanning (CBCT) and to compare the classifications by Vertucci and Ahmed et al. Images of 350 maxillary first premolars were analyzed. Scans were obtained from 226 patients: 131 women and 95 men. The root canal configurations were classified according to Vertucci and a new system by Ahmed et al. In addition, the number of roots and the level where roots bifurcated were identified. The results were submitted to statistical analysis. Most maxillary first premolars had two roots (69.1%). Most bifurcations were located in the coronal part of the root (44.2%) and the least in the apical part (15.3%). Bifurcation in the coronal part of the root was observed more often in the teeth of men than women. In turn, bifurcation in the central or apical part was significantly more common in women than in men. The most common canal configuration of the maxillary first premolars was type IV (78.2%) according to Vertucci and ²FPB¹P¹ (65.4%) according to the new classification. Among the remaining cases, almost all types of canals described by Vertucci, and many combinations of codes given in the new classification were demonstrated. The maxillary first premolars displayed a wide range of root and canal anatomical variations. The new system for classifying canal morphology based on Ahmed et al. is more accurate than the Vertucci classification.

A quick method of determining the age of 8 years old: Based on the first premolars on Eastern Chinese population

BACKGROUND

Whether an individual is over 8 years old is of great significance in clinical medicine and law. The Demirjian, Willems and Cameriere methods are one of the most widely used methods of dental age estimation, but neither method was suitable in Eastern China. And all of them are time-consuming for clinical work. A new and time-saving method for judging whether an individual is 8 years old is yet to be proposed on Eastern Chinese population.

AIM

The paper proposes a method for judging whether an individual is 8 years old based on the relationship between age and the first premolar maturity index (I_1PM), which is related to the measurement of the open apices of the first premolar.

SUBJECTS & METHODS

It is a retrospective study where orthopantomograms of 748 children (356 female and 392male) aged 5-13 years were collected and analyzed. Linear regression was used to infer the value of I_1PM for eastern China. Furthermore, this method was compared to those based on Demirjian's stages F.

RESULTS AND CONCLUSIONS

A cutoff value of I_1PM = 0.35 was taken. The sensitivity of this test was 90.0% and specificity was 93.3%. Furthermore, the proportion of individuals with a correct classification was 90.9%. The results of the test showed that Demirjian's stage F performance was lightly better than I_1pm < 0.35. However, the sensitivity, specificity, and overall accuracy of both are greater than or equal to 90.0%, and the differences are not very significant.

Evaluation of C-shaped canals in mandibular second molars of a selected patient group using cone beam computed tomography: prevalence, configuration and radicular groove types

The aim of the present study was to examine the prevalence, symmetry and configurations of C-shaped canals and radicular groove types in mandibular second molars according to age and sex in a Turkish sub-population using cone beam computed tomography (CBCT). In total, 674 CBCT images (368 females and 306 males, aged 18-76 years) of 1348 mandibular second molars were evaluated. The symmetry, configuration of C-shaped root canals, radicular groove types with age and sex were noted. One sample chi-square test and chi-square test were used to determine statistically significant differences. The statistical significance level was set at p < 0.05. Of the 1348 mandibular second molars evaluated, 10.7% had C-shaped root canals. C-shaped root canals appeared to be significantly more common in females than in males (p < 0.05). C1 (44.4%) was the most frequent configuration in the coronal third, and C2 (44.4%), and C4 (31.9%) were the most frequent configurations in middle and apical thirds, respectively. Type 2 (45.1%) was the most common radicular groove type (p < 0.05). The frequency of C-shaped root canals in mandibular second molars in a Turkish sub-population was considerably high (10.7%). CBCT can aid the detection of C-shaped canals and their configurations. Dentists should consider the possibility of C-shaped canals in root canal treatment of mandibular second molars, as these configurations have implications for biomechanical preparation and filling methods.

Anatomical Evaluation of Mandibular Molars in a Saudi Population: An In Vivo Cone-Beam Computed Tomography Study

Objective

This study assessed the canal configuration of mandibular molars according to Vertucci's classification of a Saudi population using cone-beam computed tomography (CBCT).

Methods

A total of 290 first and 367 second mandibular molars were analyzed. The CBCT images were evaluated in three sections to inspect the number of roots and canals and canal system. The data are presented as frequencies and percentages. The chi-squared test was used to assess differences between both sides. SPSS was used for analysis, with a significance level of α ≤ 0.05.

Results

Among the first molars, 95.4% of the teeth had two roots, and 64.5% had three canals. Approximately 57.9% showed Vertucci type IV mesial roots. Between the second molars, 89.6% of teeth had two roots and 80.4% had three canals. The frequency of Vertucci type IV (39.4%) was the highest in mesial roots. The first molars showed a high prevalence of 3-rooted teeth (5.5%). Both the right and left sides showed teeth with similar external and internal anatomy (p < 0.05).

Conclusion

Most of the mandibular first and second molars had two roots and three canals. In the first mandibular molars, similar to the second mandibular molars, the majority of the mesial canals had Vertucci type IV, while the distal canals had Vertucci type I.

Root dentine thickness in C-shaped lower second molars after instrumentation: A CBCT and micro-CT study

Stripping perforation is a possible complication in instrumentation of C-shaped canals. This study evaluated the minimum thickness of the root canal wall in C-shaped teeth after instrumentation. Twelve extracted C-shaped mandibular second molars (four teeth of type I, II and III each) were examined by CBCT (voxel size 90 μm) before and after instrumentation with WOG primary file. Micro-CT scans (voxel size 30 μm) were obtained after instrumentation. Percentage of canal wall area touched by the file and minimum thickness of dentine were measured and compared between CBCT and micro-CT. In type I C-shape canals, less than 10% of the canal wall area was touched by the instrument. In ten teeth, the shortest distance to root surface was from the instrumented area; no perforations occurred. CBCT and micro-CT measurements were in good agreement in ten cases; in two teeth, micro-CT revealed considerably shorter distance to root surface. The two shortest distances were 0.27 and 0.41 mm.

Interpretation of Root Canal Anatomy of Maxillary and Mandibular Permanent Canines in Saudi Subpopulation: A Cone-Beam Computed Tomography (CBCT) Study

The objective of this investigation was to evaluate the root canal anatomy of permanent canines in a Saudi subpopulation utilizing CBCT. A total of 1328 CBCT images of maxillary (634) and mandibular (694) permanent canines were collected from Saudi patients who visited the College of Dentistry at King Saud University in Riyadh. The images were analyzed for root and canal numbers, canal configuration types, and symmetry between the bilateral canine teeth in each arch. Gender, age, and tooth position were recorded. The Kappa test was used for both inter- and intraexaminer reliabilities. Data were analyzed with the chi-square test at a P value ≤ 0.05. There were no two-rooted teeth in maxillary canines, and 1.89% had two canals. Double roots and double canals in mandibular canines were found in 2.88% and 9.94% of the teeth, respectively. Type I canal configuration was more common in maxillary canines (97.94%) compared to mandibular canines (92.07%). Maxillary canines showed higher bilateral symmetries of root and canal numbers and canal configuration types (100%, 98.1%, and 97.9%, resp.) compared to mandibular canines (97.1%, 90.1%, and 92.1%, respectively). The majority of maxillary and mandibular canines had a single root with a single canal and type I canal configuration. Mandibular canines are characterized by having more than one root and canal and alterations in root canal configurations compared to maxillary canines.

Root canal morphology of South Asian Indian mandibular first, second, and third molar: A dye penetration and clearing study

Context:

Studying in detail the root canal morphology specific to the Indian mandibular molars will help discern whether the root canal anatomy patterns resemble those reported internationally or are different from it.

Aim:

The aim is to study the root canal anatomy of Indian permanent mandibular first, second, and third molar teeth using a tooth clearing technique.

Methods:

The root canals of a total of 300 extracted Indian mandibular molars consisting of 100 first, second, and third molars each were accessed and injected with India ink, after which they were subjected to the clearing technique.

Statistical Analysis:

Data was analyzed using descriptive statistics for the computation of percentages using SPSS version 21.

Results:

Of the hundred first molars, 90% of teeth were two rooted with three canals, 79% had two apical foramina. 70% mesial roots of the three-rooted type showed Type I, whereas 100% distal roots and distolingual roots showed Type I Vertucci’s anatomy. About 70% mesial roots of two roots showed Type II and 90% distal canals showed Type I configuration. Among the second molars, five (5%) were single-rooted, ninety-one (91%) teeth were two rooted and four (4%) had three roots. Among the mandibular third molars, fifteen (15%) teeth had one root, sixty-three (63%) teeth had two roots, eighteen (18%) teeth had three roots, and four (4%) teeth had four roots.

Conclusions:

The root canal anatomic features of mandibular molars showed differences in the frequency of particular anatomic types as compared to mandibular molars from other racial backgrounds. Further comparative studies on inter-racial anatomic characteristics from various geographic locations would be beneficial.

Root and Canal Morphology of Mandibular Second Molars in a Yemeni Population: A Cone-beam Computed Tomography

Objective:

This study aimed to identify and characterize root and canal morphology and the prevalence of C-shaped canals of mandibular second molars (MSMs) in a Yemeni population using cone-beam computed tomography (CBCT).

Methods:

Three-dimensional digital images of 500 MSMs with mature roots were taken from 250 Yemeni individuals and analyzed for the following features: number of roots, shape and type of roots, type of canal configuration in each root, prevalence of C-shaped canal, and primary variations in the morphology of root and canal systems. Chi square and Fisher’s exact tests were employed for statistical analysis.

Results:

89.6% of MSMs had two separate roots, 9% had two fused roots, 0.6% had three separate roots and 0.8% had one root. Mesial root was mostly ribbon-shaped (60.5%) and distal root was mostly kidney-shaped (50.7%). Type II and Type I canal configurations were the most frequent in mesial (56.9%) and distal (91.3%) roots, respectively. C-shaped canals were found in 9%. Six variants were found with variant 3 being the most common (71%).

Conclusion:

Yemeni MSMs are mainly two-rooted. The prevalence of three- and one-rooted MSMs was relatively low. Various canals configurations were found in MSMs among this sample of Yemeni population. The clinicians should consider C-shaped roots and canals when treating Yemeni MSMs and should be aware of their morphological variations to ensure successful root canal treatment. Although bilateral similarity of many anatomical features of MSMs was found, individual evaluation of each MSM is necessary while performing endodontic treatment on both sides.

C-Shaped canal system in mandibular premolars evaluated by cone-beam computed tomography in a population of the Autonomous City of Buenos Aires, Argentina

OBJECTIVE

To evaluate cone-beam computed tomography images in an Argentine population in order to determine the presence of mandibular premolars with C-shaped canal system and classify them.

METHODS

697 images were observed, 170 of them fulfilling the selection criteria. Once established the presence of a C-shaped canal system, premolars were classified using Fan's criteria. Data description was made by frequencies and percentages rates, with a 95% confidence interval according to the score method. Comparisons were assessed by means of the Chi-square test with a significance level equal to 5%.

RESULTS

Of 269 first premolars, 27 teeth showed C-shaped canal system, i.e. 10%, and of 231 second premolars, 4 presented C-shaped canal system, i.e. 2%. Out of 17 patients presenting first premolars in both sides, 6 showed a bilateral C-shaped canal system pattern and 11 did not present this condition. When the condition was unilateral (n = 15), 7 patients showed C-shaped canal in the tooth 3.4 and 8 patients showed C-shaped canal in the tooth 4.4. The second premolars showed C-shaped canals unilaterally. Along the canal, configuration variations at the three-thirds have been observed for the first and second mandibular premolars.

CONCLUSION

The C-shaped canal system pattern prevalence in mandibular first and second premolars was estimated for the first time in an Argentine population, in vivo. The present report contributes to the epidemiological understanding of the anatomical variable of the inner dental configuration and its extrapolation to the clinical practice.

Prevalence and Morphology of C-Shaped Canals: A CBCT Analysis in a Korean Population

This retrospective study of roots with C-shaped canals investigated their prevalence, configuration type, and lingual wall thickness, as well as the panoramic radiographic features of roots in permanent mandibular second molars confirmed to have C-shaped canals on cone-beam computed tomography (CBCT) in a Korean population. In total, 1884 CBCT images of mandibular second molars were examined by two endodontists to analyze the presence of C-shaped canals according to age and sex. The bilateral occurrence of C-shaped roots and their morphology on panoramic radiography were assessed and statistically analyzed using the chi-square test. The classification of Fan et al. was applied to categorize the configurations of C-shaped canals. The lingual wall thickness was calculated in the mesial, middle, and distal areas at the orifice and at 5 mm from the apex. The Mann-Whitney U test was used to analyze the mean difference of lingual wall thickness between the apex and orifice level. A P value of 0.05 was considered to indicate statistical significance in the statistical analyses. Of 2508 mandibular second molars, 924 (36.8%) had C-shaped root canals. The prevalence was significantly lower in the over 61 age group (24.08%) than in the 21-30-year age group (40.02%) and was higher in women (42.32%). Most cases were bilateral (85.9%). The C1 type was the most common (35.3%). The prevalence of C1 type canals decreased, while that of C3b type canals increased with age. In 75.2% of teeth having C-shaped root canals on CBCT, fused roots were observed on panoramic views. The difference in the lingual wall thickness at the orifice and 5 mm from the apex was significant in the middle area in all configurations of C-shaped root canals. When performing nonsurgical or surgical endodontic procedures of the mandibular second molars, clinicians should consider age, sex, ethnicity, and anatomical variations.

Root anatomy and canal configuration of human permanent mandibular second molar: A systematic review

The objective of the study was to review the literature on root anatomy and canal configuration in permanent mandibular second molar based on Vertucci classification. Online electronic databases such as PubMed-Medline, Embase, Scopus, and Cochrane Library were searched using appropriate keywords from the earliest available date till 10^th February 2021 restriction on language. Additional sources such as Google Scholar, major journals, unpublished studies, conference proceedings, and cross-references were explored. Information curated for data extraction included methodology, population, sample size (number of teeth), number of root canals, and type of root canal configuration (RCC). Thirty-seven articles were selected with a total of 12,393 permanent mandibular second molar teeth. In the mesial root, Type IV canal configuration with 37.3% was more frequent, having two canals with 70.4%. In the distal roots, one canal was more prevalent with 77% occurrence, and Type I canal configuration was more frequent with 85.2%. Comprehensive knowledge of tooth anatomy and root canal morphology is crucial to root canal treatment. Therefore, an understanding of the canal configuration and anatomy is necessary for the dentist to enhance successful endodontic treatment. Our systematic review findings reveal a wide variety of possible canal configurations among permanent mandibular second molar, while the number of canals ranged from 1 to 5 in number. The evidence is intended to help dental practitioners to avoid mishaps such as perforation and missing canals and anticipation of potential complications during treatment.