Extraction of inulin from Burdock root (Arctium lappa) using high intensity ultrasound

Pulsed Electric Field-Assisted Extraction of Inulin from Ecuadorian Cabuya (Agave americana)

Inulin is a carbohydrate that belongs to fructans; due to its health benefits, it is widely used in the food and pharmaceutical industries. In this research, cabuya (Agave americana) was employed to obtain inulin by pulsed electric field-assisted extraction (PEFAE) and FTIR analysis confirmed its presence. The influence of PEFAE operating parameters, namely, electric field strength (1, 3 and 5 kV/cm), pulse duration (0.1, 0.2 and 0.5 ms), number of pulses (10,000, 20,000 and 40,000) and work cycle (20, 50 and 80%) on the permeabilization index and energy expenditure were tested. Also, once the operating conditions for PEFAE were set, the temperature for conventional extraction (CE) and PEFAE were defined by comparing extraction kinetics. The cabuya meristem slices were exposed to PEFAE to obtain extracts that were quantified, purified and concentrated. The inulin was isolated by fractional precipitation with ethanol to be characterized. The highest permeabilization index and the lowest energy consumption were reached at 5 kV/cm, 0.5 ms, 10,000 pulses and 20%. The same extraction yield and approximately the same amount of inulin were obtained by PEFAE at 60 °C compared to CE at 80 °C. Despite, the lower amount of inulin obtained by PEFAE in comparison to CE, its quality was better because it is mainly constituted of inulin of high average polymerization degree with more than 38 fructose units. In addition, TGA analyses showed that inulin obtained by PEFAE has a lower thermal degradation rate than the obtained by CE and to the standard.

Innovative application of a novel and thermostable inulin fructotransferase from Arthrobacter sp. ISL-85 to fructan inulin in burdock root to improve nutrition

Inulin fructotransferase converts prebiotic polysaccharide inulin to difructose anhydride III, known for its numerous beneficial physiological effects. While previous studies focused on using inulin extracts under optimal conditions, this study delves into the enzyme's behavior when dealing with more complex food materials, inulin-rich burdock root, which possesses greater nutritional value but may influence the enzymatic reaction. An inulin fructotransferase from Arthrobacter sp. ISL-85 was identified and characterized, which has the highest activity of 783 U mg-1 at pH 6.5 and 65 °C and remains stable even up to 80 °C. When applied to inulin-rich burdock root (pH 4.7) at 80 °C for 2 h, the enzyme yielded 4.1 g of difructose anhydride III, concurrently increasing fructo-oligosaccharides. This study demonstrates the potential of this enzyme as a valuable tool for efficiently processing inulin within whole food materials under high temperatures. Such an approach could pave the way for enhancing nutrition and promoting health benefits.

Innovative application of a novel di-D-fructofuranose 1,2':2,3'-dianhydride hydrolase (DFA-IIIase) from Duffyella gerundensis A4 to burdock root to improve nutrition

Burdock is native to Europe and Asia and rich in many functional ingredients, including biomacromolecule polysaccharide inulin. The prebiotic fructan inulin can provide energy to organisms via several pathways. One pathway is that inulin fructotransferase (IFTase) first converts inulin to III-type difructose anhydride (DFA-III), which has many beneficial physiological functions. Then, DFA-III is hydrolyzed to inulobiose, which is a Fn-type prebiotic fructo-oligosaccharide, via difructose anhydride hydrolase (DFA-IIIase). However, there has been no study on the application of IFTase or DFA-IIIase to process burdock to increase DFA-III or inulobiose. Moreover, only five DFA-IIIases have been reported to date and all of them are from the Arthrobacter genus. Whether other microbes except for the Arthrobacter genus can utilize DFA-III through DFA-IIIase is unknown. In this work, a DFA-IIIase from Duffyella gerundensis A4 (D. gerundensis A4), abbreviated as DgDFA-IIIase, was identified and characterized in detail. DgDFA-IIIase is a bifunctional enzyme, that is, besides its hydrolytic ability to DFA-III, it has the same catalytic ability as IFTase to inulin. The enzyme was applied to the burdock root aiming at inulin and DFA-III, and inulobiose was produced with an increase in Gn-type fructo-oligosaccharide. The work verifies that microorganisms of the non-Arthrobacter genus also have the potential ability to use DFA-III by DFA-IIIase, and DFA-IIIase is feasible to increase functional substances of burdock root instead of IFTase and endo-inulinase, which paves the way for the production of functional food utilizing the polysaccharide inulin to improve nutrition and health.

Effect of extraction methods on the chemical, structural, and rheological attributes of fructan derived from Arctium lappa L. roots

The focus of this study was the evaluation of how extraction techniques impact the chemical, structural, and rheological attributes of fructans extracted from Arctium lappa L. roots. Three distinct extraction procedures were used, utilizing water as solvent, infusion extraction conducted at ambient temperature (25 °C for 5 min), thermal extraction employing reflux (100 °C for 2 h), and ultrasound-assisted extraction (50 °C for 1.38 h with a 158 W output). Chemical characterization by Nuclear Magnetic Resonance (NMR) and colorimetric analyses revealed the obtaining of inulin-type fructans (yield 83 %). The degree of polymerization (DP) was found to be the lowest for ultrasound-assisted extraction (14.38), followed by the room-temperature (20.41) and thermal (21.14) extraction techniques. None of the extraction techniques appeared to modify the molecular structure of the isolated compounds. In X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analyses, distinct crystallization patterns were observed for the room-temperature and thermal extraction techniques, though all fractions consistently exhibited characteristic bands of inulin-type fructan. Rheological assessments indicated a viscoelastic nature of the fractions, with those extracted thermally demonstrating a greater viscosity. This study shows that the choice of extraction method can influence the structural characteristics of inulin-type fructans derived from the burdock root.

Extraction, Physicochemical Properties, Functional Activities and Applications of Inulin Polysaccharide: a Review

Inulin is a naturally soluble dietary fiber that is widely distributed and primarily derived from plants. As a reserve biopolysaccharide in plants, inulin is considered an indigestible carbohydrate of fructan because of its unique β-(2,1)-glycosidic bond structure. Numerous recent animal and human experimental studies have shown that functional inulin possesses multiple bioactivities, including immunomodulatory, antioxidant, antitumor, hepatoprotective, hypoglycemic, and gastrointestinal protective activities. Due to its increasing popularity, people tend to consume foods containing inulin. Moreover, inulin holds promise as a bioactive compound for use in the development of various food products. Therefore, this paper provides a detailed review of the extraction method, physicochemical properties, functional activity, and application development of inulin polysaccharides, to provide a theoretical foundation for further advancements in the fields of preparation and application of functional foods.

Inulin: properties and health benefits

Inulin, a soluble dietary fiber, is widely found in more than 36 000 plant species as a reserve polysaccharide. The primary sources of inulin, include Jerusalem artichoke, chicory, onion, garlic, barley, and dahlia, among which Jerusalem artichoke tubers and chicory roots are often used as raw materials for inulin production in the food industry. It is universally acknowledged that inulin as a prebiotic has an outstanding effect on the regulation of intestinal microbiota via stimulating the growth of beneficial bacteria. In addition, inulin also exhibits excellent health benefits in regulating lipid metabolism, weight loss, lowering blood sugar, inhibiting the expression of inflammatory factors, reducing the risk of colon cancer, enhancing mineral absorption, improving constipation, and relieving depression. In this review paper, we attempt to present an exhaustive overview of the function and health benefits of inulin.

Ultrasound-Assisted Aqueous Extraction of Chlorogenic Acid and Cynarin with the Impact of Inulin from Burdock (Arctium lappa L.) Roots

The ultrasound-assisted aqueous extraction of chlorogenic acid (CGA) and cynarin with the impact of inulin from burdock (Arctium lappa L.) roots was investigated. Three extraction modes, ultrasound at 40 kHz/300 W (U-40), ultrasound at 120 kHz/300 W (U-120), and shaking at 120 rpm (S-120), were compared. The effects of process parameters on the extraction of polyphenols, CGA, cynarin, inulin, and antioxidant activity using U-40 were evaluated. In 10 min, 50 °C, and 1/30 (g/mL-water) of solid-to-liquid ratio, the order of CGA content in the dried burdock root powder (DBR) was U-40 (484.65 μg/g-DBR) > U-120 (369.93 μg/g-DBR) > S-120 (176.99 μg/g-DBR), while the order of cynarin content in DBR was U-120 (376.47 μg/g-DBR) > U-40 (341.54 μg/g-DBR) > S-120 (330.44 μg/g-DBR), showing the selective extraction of CGA and cynarin between using 40 and 120 kHz of ultrasound. The profiles of increase and then decrease in free CGA and cynarin concentrations against time revealed their degradation, including their interactions with the abundant inulin. The kinetic model, considering extraction followed by degradation, was proposed to describe the variations of free CGA and cynarin against time. This study provides an effective method using water to extract CGA, cynarin, and inulin from burdock roots.

Optimization of Aqueous Extraction Conditions of Inulin from the Arctium lappa L. Roots Using Ultrasonic Irradiation Frequency

Ultrasound-assisted extraction is a promising technique to obtain active compounds from plants with high efficiency. The present study was conducted in two sections. In the first phase, the effect of solvent type (methanol, ethanol, water, and water-ethanol (50 : 50, v/v)) on inulin extraction yield from burdock roots (Arctium lappa L.) was investigated by the conventional method. The second phase aim was to optimize the condition of inulin and phenolic compounds including sonication time (10–40 min), sonication temperature (40–70°C), and solid/solvent ratio (1 : 20–1:40 g/ml) using response surface methodology (RSM). The results demonstrated that the highest inulin efficiency was extracted by water in the conventional method, which is equal to 10.32%. The optimum conditions of ultrasound-assisted water extraction for independent variables including sonication time and temperature as well as solid/water ratio were 36.65 min, 55.48°C, and 1 : 35 g/ml, respectively, which were determined on the maximization of inulin and total phenol content and minimization of IC50. At this optimum condition, inulin yield, phenolic compounds, and IC50 were found to be 12.46%, 18.85 mg GA/g DW, and 549.85 µg/ml, respectively. Regarding the results of this research, ultrasound-assisted extraction can be used as an alternative to the conventional extraction methods in extracting bioactive compounds from medicinal plants because it may improve the mass transfer, reducing the extraction time and the solvent used.

Burdock (Arctium lappa L) roots as a source of inulin-type fructans and other bioactive compounds: Current knowledge and future perspectives for food and non-food applications

The roots and tubers of the Asteraceae family are known as a source of various oligosaccharides, and chicory roots and Jerusalem artichoke have stood out for its commercial viability. However burdock root (Arctium lappa L.), which is adapted to temperate climate, moist, and sandy soil, is still unknown as health food in the western world. This review showed the potential of burdock roots as a source of prebiotic fibers, chlorogenic acids, cinnarine, lignans, and quercetin. The extraction methods of burdock functional compounds are made with water, temperature and time variations only. Biological assays showed antioxidant activity, anti-inflammatory, and hypolipidemic properties, and gastric mucosal defense mechanisms, among others. Therefore, the use of burdock roots as functional food should be encouraged in countries that have imported products derived from other roots of the same family for health benefits.

Inulin from Pachyrhizus erosus root and its production intensification using evolutionary algorithm approach and response surface methodology

•

The ultrasound assisted extraction of inulin from Pachyrhizus erosus roots.

•

Compared with microwave assisted and conventional extraction technique.

•

Optimization the extraction by RSM and genetic algorithm.

•

Purity profiling and degree of polymerization of extracted inulin.

•

Significant prebiotic activity recorded using Lactobacillus fermentum.

Production of inulin from yam bean tubers by ultrasonic assisted extraction (UAE) was optimized by using response surface methodology (RSM) and genetic algorithms (GA). Yield of inulin was obtained between 11.97%–12.15% for UAE and 11.21%–11.38% for microwave assisted extraction (MAE) using both the methodologies, significantly higher than conventional method (9.9 %) using optimized conditions. Under such optimized condition, SEM image of root tissues before and extraction showed disruption and microfractures over surface. UAE provided a shade better purity of extracted inulin than other two techniques. Degree of polymerization in inulin was also recorded to be better, might be due lesser degradation during extraction. Significant prebiotic activity was recorded while evaluation using Lactobacillus fermentum and it was 36 % more than glucose treatment. Energy density by UAE was few fold lesser than MAE. Carbon emission was far more less in both these methods than the conventional one.

Extraction of Inulin from Andean Plants: An Approach to Non-Traditional Crops of Ecuador

Inulin is a polysaccharide of fructose widely used in the food and pharmaceutical industry due to its physicochemical properties and technological applications. Inulin from jicama (Smallanthus sonchifolius) and cabuya (Agave americana) was obtained. The steps for inulin obtention were: raw material preparation, extraction and purification. The extraction conditions were determined using a random design with three levels of stirring speed (0, 130 and 300 rpm), and a 3² factorial experimental design with three levels of temperature (40, 60 and 80 °C) and solid:liquid ratio (1:2, 1:3 and 1:5 S:L). The results showed that the best extractions conditions for jicama were 130 rpm, 75 °C, 1:5 S:L and 25 min; while for cabuya were 80 °C, 300 rpm, 1:5 S-L and 100 min. The weight average molecular weight of inulin from jicama and cabuya were 5799.9 and 4659.75 g/mol, respectively. The identity of the obtained inulin from jicama and cabuya were confirmed by infrared (IR) and Raman spectroscopy. In addition, scanning electron microscopy, differential scanning calorimetry and thermogravimetry analyses were performed to characterize both inulins.

Arctium Species Secondary Metabolites Chemodiversity and Bioactivities

Arctium species are known for a variety of pharmacological effects due to their diverse volatile and non-volatile secondary metabolites. Representatives of Arctium species contain non-volatile compounds including lignans, fatty acids, acetylenic compounds, phytosterols, polysaccharides, caffeoylquinic acid derivatives, flavonoids, terpenes/terpenoids and volatile compounds such as hydrocarbons, aldehydes, methoxypyrazines, carboxylic and fatty acids, monoterpenes and sesquiterpenes. Arctium species also possess bioactive properties such as anti-cancer, anti-diabetic, anti-oxidant, hepatoprotective, gastroprotective, antibacterial, antiviral, antimicrobial, anti-allergic, and anti-inflammatory effects. This review aims to provide a complete overview of the chemistry and biological activities of the secondary metabolites found in therapeutically used Arctium species. Summary of pharmacopeias and monographs contents indicating the relevant phytochemicals and therapeutic effects are also discussed, along with possible safety considerations.

Phytotoxic activity of crop residues from Burdock and an active substance

Problems related to weed management such as outbreaks of herbicide-resistant weeds have recently increased. An interesting approach to such problems is to use plant materials with phytotoxic activity. Burdock (Arctium lappa L.) is a biennial herb belonging to Asteraceae and is cultivated in several countries. The present study investigated the phytotoxic activity of burdock and its active substances. Extracts of both burdock leaves and roots inhibited the shoot and root growth of cress and barnyard grass, where the level of inhibition increased with increasing extract concentration. The leaf extracts had 2.0-2.5 times higher activity than the root extracts. Bioassay-guided separations of the leaf extracts led to isolation of a phytotoxic substance, onopordopicrin. Onopordopicrin significantly inhibited the shoot and root growth of cress and barnyard grass. The concentrations of the substance required for 50% growth inhibition were 0.27 and 0.26 mM for cress shoots and roots, respectively, and 1.86 and 0.35 mM for barnyard grass shoots and roots, respectively. The present results suggest that burdock leaves have high phytotoxic activity and onopordopicrin may play a major role in the activity. Burdock leaves may be a good resource for weed management.

Inulin rich carbohydrates extraction from Jerusalem artichoke (Helianthus tuberosus L.) tubers and application of different drying methods

In this study the operational extraction variables to obtain higher yields of inulin from Jerusalem artichoke tubers (JAT), as well as the optimal conditions to obtain a stable and dispersible powdered product by either spray or freeze drying, were studied. With this purpose, the powder yield, moisture content, water activity and flowability or products obtained by different experimental conditions were analyzed. Inulin rich carbohydrates (IRC) extraction was performed from lyophilized and ground tubers employing distilled hot water as solvent. It was proved that the solid:solvent ratio (S:S) was the critical variable in the extraction process, followed by temperature. Thus, the IRC extraction was optimal without ultrasound assistance, at 76°C, employing a S:S of 1:16, during 90min. In addition, the powder obtained by freeze-drying of the IRC extract showed advantages respect to powders obtained by spray-drying regarding the yield and considering that maltodextrin was not necessary as encapsulation agent. In another hand, spray drying process provided IRC powered materials with appropriate flow properties, and taking into account cost and time of production, this method should be considered as an alternative of freeze-drying.

Functional and therapeutic potential of inulin: A comprehensive review

Inulin as a heterogeneous blend of fructose polymers is diversely found in nature primarily as storage carbohydrates in plants. Besides, inulin is believed to induce certain techno-functional and associated properties in food systems. Inulin owing to its foam forming ability has been successfully used as fat replacer in quite a wide range of products as dairy and baked products. Furthermore, it is known to impart certain nutritional and therapeutic benefits that extend apart to improve health and reduce the risk of many lifestyle related diseases. Additionally, as a functional ingredient, Inulin has been adopted in various efficacy studies involving animal and human studies to function as a prebiotic, in promoting good digestive health, influencing lipid metabolism and has some beneficial roles in ensuring optimum levels of glucose and insulin. This review article is an attempt to present a comprehensive overview on both techno-functional and therapeutic potential of inulin.

Preparation of Inulin Powder from Jerusalem Artichoke (Helianthus tuberosus L.) Tuber

The complete procedure for the production of inulin powder from Jerusalem artichoke tubers (JAT) was investigated. The procedure consists of isolation of inulin from JAT, elimination of color from the inulin extract and solidification. Washed tubers were first sliced, dried in a 60 °C oven for 10 h and then milled and sieved into a powder. Inulin was isolated from the JAT powder by hot water extraction using an accelerated solvent extractor (ASE). The effects of temperature and time for the extraction were investigated. The highest extraction efficiency was obtained at the extraction temperature of 80 °C for 20 min. The color of the extract was eliminated using ion exchange process with diethylaminoethyl cellulose as the sorbent. The inulin powder was subsequently obtained by freeze drying. Inulin content and inulin profiles were monitored to evaluate the efficiencies of the complete procedure. The inulin content was indirectly determined by spectrophotometry from free and total fructose measurements using potassium iodide. The inulin profile was monitored using high performance anion exchange chromatography equipped with integrated pulse amperometric detection (HPAEC-PAD). The proposed method provided the inulin production yield of 92.5%. The present procedure is fast, simple and effective for production of inulin powder from JAT. In addition, infrared spectra and some physico-chemical properties of the obtained inulin powder were determined and compared with the standard inulin.

Characterization of fructan extracted from Eremurus spectabilis tubers: a comparative study on different technical conditions

The fructans, inulin and oligofructose, were known to possess many physiologic properties. In the present study, the Box-Behnken design was used to determine the optimum extraction conditions of fructan from Eremurus spectabilis root powder (Serish) with water extraction, direct and indirect ultrasound assisted extraction methods that gave the maximum yield. Sonication amplitude (20-100 %), sonication temperature (30-70 °C) and sonication time (5-40 min) were considered variables of direct and indirect ultrasound extractions while for conventional extraction the following variables were water to solid ratio (30-50 v/w), temperature (40-90 °C) and time (5-40 min). A second-order polynomial model was fitted to each response and the regression coefficients were determined using least square method. There was a good agreement between the experimental data and their predicted counterparts. In addition to establishing the difference of these extraction methods, the scanning electron microscopy, Fourier-transform infrared spectroscopy, zeta potential and particle size analysis have been shown to be useful tools to investigate, approximate and predict characteristics of extracted fructan. Moreover, comparison of conventional extraction, direct sonication extraction, indirect sonication extraction showed the indirect sonication extraction is a suitable method for fructan extraction.

Liquid phase adsorption behavior of inulin-type fructan onto activated charcoal

This study describes liquid phase adsorption characteristics of inulin-type fructan onto activated charcoal. Batch mode experiments were conducted to study the effects of pH, contact time, temperature and initial concentration of inulin. Nearly neutral solution (pH 6-8) was favorable to the adsorption and the equilibrium was attained after 40 min with the maximum adsorption Qmax 0.182 g/g (adsorbate/adsorbent) at 298 K. The experimental data analysis indicated that the adsorption process fitted well with the pseudo-second-order kinetic model (R(2) = 1) and Langmuir isotherms model (R(2) > 0.99). Thermodynamic parameters revealed that the adsorption process was spontaneous and exothermic with a physical nature. Inulin desorption could reach 95.9% using 50% ethanol solution and activated charcoal could be reused without significant losses in adsorption capacity. These results are of practical significance for the application of activated charcoal in the production and purification of inulin-type fructan.

Box-Behnken design for optimum extraction of biogenetic chemicals from P. lanceolata with an energy audit (thermal × microwave × acoustic): a case study of HPTLC determination with additional specificity using on-line/off-line coupling with DAD/NIR/ESI-MS

INTRODUCTION

The genus Pluchea comprises about 80 species distributed worldwide, out of them, only Pluchea lanceolata (DC.) Oliv. & Hiern, is used extensively in the traditional system of India. No chromatographic method is available for its quality.

OBJECTIVES

To perform the energy audit for the extraction of biogenetic pentacyclic triterpene, its acetate and sterol from P. lanceolata utilising organic and four alternative solvents. Additionally to resolve the uncertainty of TLC determination, on-line/off-line coupling with a diode-array detector (DAD), and near-infrared (NIR) and electrospray ionisation (ESI) MS was introduced.

METHODS

The extraction of taraxasterol (Tx), taraxasterol acetate (TxAc) and stigmasterol (St) from P. lanceolata was performed using three energy modes. The effects of different operating parameters were studied for optimum extraction yield using the design of experiments, that is, the central composite design and Box-Behnken design. In addition to the retention factor (Rf ) and visible spectral matching, two additional optical spectroscopic techniques, that is, NIR and ESI-MS, were applied for extended specificity.

RESULTS

The method was developed for Tx, TxAc and St determination using HPTLC at 645 nm. The optimum extraction yield of targeted compounds was found to be higher with organic solvents than eco-friendly surfactants. The pulse ultrasonic assisted extraction (PUAE) has resulted in optimum extraction of compounds comparable to hot extraction. Both NIR and ESI-MS provided extended specificity in determination.

CONCLUSION

The 5/1-PUAE was determined to be effective, reproducible, simple and energy efficient for the determination of Tx, TxAc and St in P. lanceolata. The offline coupling of NIR and ESI-MS with HPTLC led to considerable improvement in specificity.

Determination of inulin-type fructooligosaccharides in edible plants by high-performance liquid chromatography with charged aerosol detector

Fructooligosaccharides (FOS), which are regarded as functional ingredients, are commonly classified as dietary fibers in many countries. However, few analytical methods for separation and analysis of individual FOS in plants, crops, and food products have been developed. In this study, a simple, rapid, and sensitive high performance liquid chromatography with charged aerosol detector (HPLC-CAD) method was developed for simultaneous determination of 11 inulin-type FOS with degree of polymerization (DP) 3-13 in different samples. The separation was performed on a Waters XBridge Amide column (4.6 × 250 mm i.d., 3.5 μm) with gradient elution. All calibration curves for investigated analytes showed good linear regression (R(2) > 0.9962). Their limits of detection (LOD) and quantification (LOQ) were in the ranges 0.4-0.6 μg/mL and 1.4-2.3 μg/mL, respectively. The recoveries ranged from 94.0% to 114.4%. A liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was applied to qualitative analysis of FOS in different samples. The developed method was successfully applied to analysis of 11 FOS in different samples of plants from Compositae, Campanulaceae, and Rubiaceae families. The developed HPLC-CAD nethod with microwave-assisted extraction can be used for quantitative analysis of FOS and is helpful for quality control of plants containing FOS.

In vitro and in vivo antioxidant activity of a fructan from the roots of Arctium lappa L

To explore new antioxidant resource from food, a water-soluble polysaccharide (ALP1) was extracted and purified from the roots of Arctium lappa L. (A. lappa L.) through hot water extraction followed by ethanol precipitation, ion-exchange chromatography and gel filtration. The antioxidant activity of ALP1 was then evaluated in vitro and in vivo. ALP1 was characterized as a fructan composed of fructose and glucose in the ratio of 13.0:1.0, with an average molecular weight of 4600 Da. The linkages in ALP1 were →1)-Fruf-(2→, Fruf-(2→ and Glcp-(1→. In vitro antioxidant assays demonstrated that ALP1 possessed moderate ABTS(+) scavenging activity, strong hydroxyl radical scavenging activity and strong ferrous ion chelating activity. In in vivo antioxidant assays, ALP1 administration significantly enhanced antioxidant enzyme activities and total antioxidant capacity, as well as decreased the levels of malondialdehyde (MDA) in both the serum and liver of aging mice. These results suggest that ALP1 has potential as a novel natural antioxidant in food industry and pharmaceuticals.

Determination of fructooligosaccharides in burdock using HPLC and microwave-assisted extraction

The root of burdock ( Arctium lappa L.) is a commonly used vegetable in Asia. Fructooligosaccharides (FOS) are usually considered as its main bioactive components. Thus, quantitative analysis of these components is very important for the quality control of burdock. In this study, an HPLC-ELSD and microwave-assisted extraction method was developed for the simultaneous determination of seven FOS with degrees of polymerization (DP) between 3 and 9, as well as fructose, glucose, and sucrose in burdock from different regions. The separation was performed on a Waters XBridge Amide column (4.6 × 250 mm i.d., 3.5 μm) with gradient elution. All calibration curves for investigated analytes showed good linear regression (r > 0.9990). Their LODs and LOQs were lower than 3.63 and 24.82 μg/mL, respectively. The recoveries ranged from 99.2 to 102.6%. The developed method was successfully applied to determination of ten sugars in burdock from different locations of Asia. The results showed that the contents of FOS in different samples of burdock collected at appropriate times were similar, and the developed HPLC-ELSD with microwave-assisted extraction method is helpful to control the quality of burdock.