Antibacterial activities of zinc oxide nanoparticles against Escherichia coli O157:H7

Development of ZnO-NPs reinforced chitosan nanofiber mats with improved antibacterial and biocompatibility properties

This paper studied the possibility of fabricating a nano-composite based on chitosan incorporated with ZnO-NPs as a promising textile for wound dressing purposes. The nanofiber mat was obtained from dispersions of ZnO-NPs in chitosan-based solution blended with PVA (Cs/PVA/ZnO-NPs scaffold). The extracted chitosan was characterized using FTIR, FE-SEM, XRD, and TGA analysis. The electrospinning optimization process was successfully done for Cs and PVA mixture and a good combination of polymers, solvent, and the ratios developed through an optimization process (10wt.% PVA and 1wt.% CS in AcAcetic 80%). The nanofibers had an average diameter below 200 nm, while the incorporation of ZnO-NPs decreased their average diameter below 150 nm. FTIR, FE-SEM, XRD analysis were used to evaluate the scaffold structure. The FE-SEM analysis proved the smooth and bead-free morphology of the fibers. Elemental analysis of the mat revealed a good distribution of ZnO-NPs along nanofibers. Cell culture studies with L929 mouse fibroblast cells revealed good viability of the cell on the Cs/PVA/ZnO-NPs scaffold. The nanoparticles improved capability of the mat for growth inhibition rate of bacterial colonies and also its wettability. The results also showed the nontoxicity of CS/PVA/ZnO-NPs composite and its considerable potential for future application in wound dressing.

ZnO Nanoparticle-Infused Vaterite Coatings: A Novel Approach for Antimicrobial Titanium Implant Surfaces

Loss of implant function is a common complication in orthopaedic and dental surgery. Among the primary causes of implant failure are peri-implant infections which often result in implant removal. This study demonstrates the development of a new antimicrobial titanium coating with ZnO nanoparticles of various sizes and morphologies immobilised in poly(allylamine hydrochloride) and alginate multilayers, combined with epitaxially grown vaterite crystals. The coated samples were characterised with various methods (FTIR, XRD, SEM) and surface properties were evaluated via water contact angle and surface charge measurements. Zinc ion release was quantified using ICP-MS. The antimicrobial efficacy of the coatings was tested against Staphylococcus aureus, Staphylococcus epidermidis, and Candida albicans while the biocompatibility was tested with preosteoblast cells (MC3T3-E1). Results demonstrated the successful preparation of a calcium carbonate/ZnO composite coating with epitaxially grown vaterite on titanium surfaces. The Zn ions released from ZnO nanoparticles dramatically influenced the morphology of vaterite where a new flower-like morphology was observed. The coated titanium surfaces exhibited robust antimicrobial activity, achieving over 90% microbial viability reduction for Staphylococcus aureus, Staphylococcus epidermidis, and Candida albicans. Importantly, the released Zn2+ concentrations remained below the cytotoxicity limit for MC3T3-E1 cells, showing potential for safe and effective implant applications.

"Harnessing green synthesized zinc oxide nanoparticles for dual action in wound management: Antibiotic delivery and healing Promotion"

Wound infections are characterized by the invasion of microorganisms into bodily tissues, leading to inflammation and potentially affecting any type of wound, including surgical incisions and chronic ulcers. If left untreated, they can delay recovery and cause tissue damage. Healthcare providers face challenges in treating these infections, which necessitate efficient treatment plans involving microbiological testing and clinical evaluation. The effectiveness of conventional treatments like antibiotics is limited by resistance. Various forms of nanotechnology have been developed, each exhibiting unique properties that address particular issues with conventional therapies. Among all the Nanocarriers, zinc oxide nanoparticles (ZnO NPs), offer promising treatments for persistent wound infections. ZnO NPs possess strong antibacterial, antioxidant, anti-inflammatory, and anti-diabetic properties, making them suitable for wound care applications. These nanoparticles can be produced economically and environmentally using green synthesis techniques that minimize toxicity and are biocompatible. While chemical and physical techniques offer precise control over nanoparticle characteristics, they often involve hazardous substances and energy-intensive procedures. The antibacterial qualities, low toxicity, and biological compatibility of green-synthesized ZnO NPs make them a promising treatment for wound infections. Their use in scaffolds, drug delivery systems, and wound dressings provides a viable approach to combat antibiotic resistance and enhance wound treatment outcomes. Furthermore research is necessary to fully realize the benefits of ZnO NPs in clinical practice.

Time-Dependent Growth of ZnO Nanowires: Unveiling Antibacterial and Photocatalytic Properties

This study investigates the synthesis, characterization, and functional properties of well-aligned zinc oxide (ZnO) nanowires (NWs) obtained by a two-step hydrothermal method. ZnO NWs were grown on silicon substrates precoated with a ZnO seed layer. The growth process was conducted at 90 °C for different durations (2, 3, and 4 h) to examine the time-dependent evolution of the nanowire properties. A comprehensive characterization of the ZnO NWs was performed using several analytical techniques. Scanning electron microscopy (SEM) revealed the morphological progression, specifically tracking changes in length and diameter as a function of the growth time. Ultraviolet (UV)-visible spectroscopy was employed to determine the optical band gap, while photoluminescence (PL) analysis provided insight into the concentration of structural defects and its evolution as a function of nanowire growth. The photocatalytic efficiency of the ZnO NWs was evaluated through the degradation of the organic dye methylene blue (MB) under UV light irradiation (365 nm). The kinetic of MB degradation was monitored for each growth time, with non-purgeable organic carbon (NPOC) analysis providing a detailed perspective on the photocatalytic activity over time. The antibacterial properties were tested against Pseudomonas putida, a Gram-negative bacterium, to determine the efficiency of the synthesized ZnO NWs as antimicrobial agents. The release of zinc ions (Zn2+), a key factor in the antibacterial mechanism, was quantified using inductively coupled plasma (ICP) analysis for each sample. By exploration of the relationship between the growth time, nanostructure morphology, and functional properties, this study provides insights into optimizing the synthesis of ZnO NWs for enhanced photocatalytic and antibacterial applications. These findings contribute to the development of advanced materials for environmental and biomedical applications.

Engineering antibacterial plasma-polymerized polyethylene glycol-ZnO nanocomposite coatings for extending pork sausage shelf life

Recently, interest in eco-friendly techniques for producing antibacterial food packaging films has surged. Within this context, plasma polymerization is emerging as a promising approach for applying degradable antibacterial coatings on various plastic films. This research therefore employs an atmospheric pressure aerosol-assisted plasma deposition technique to create polyethylene glycol (PEG)-like coatings embedding zinc oxide nanoparticles (ZnO NPs) of varying sizes on polyethylene (PE) substrates. The antimicrobial efficacy of these plasma-polymerized PEG-ZnO coatings against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) is assessed, demonstrating a robust antibacterial effect, particularly when using smaller ZnO NPs (35-45 nm). The deposition of uniform, conformal PEG-ZnO nanocomposites with a chemical composition akin to standard PEG polymers has been achieved. In addition, ZnO NPs are homogeneously dispersed within the PEG matrix, up to a concentration of 1 wt%. To assess the antibacterial performance in contact with real food, pasteurized pork sausages inoculated with a mixture of L. monocytogenes or LAB strains are wrapped in plasma-coated PE and vacuum-packed. Bacterial growth is monitored during storage at 7 °C over time, demonstrating that the developed plasma-polymerized PEG-ZnO nanocomposite effectively inhibits bacterial growth during refrigerated storage, with a more pronounced effect on LAB. The release of Zn from the developed PEG-ZnO nanocomposite into various food simulants also remains below the specific migration limit (5 mg kg-1 or L-1 food), confirming coating safety. Overall, plasma-polymerized PEG-ZnO nanocomposite coatings thus show great promise as effective degradable antimicrobial films for food packaging applications.

Hexagonal zinc oxide nanoparticles: a novel approach to combat multidrug-resistant Enterococcus faecalis biofilms in feline urinary tract infections

Introduction

Enterococcus faecalis, a common inhabitant of the feline gastrointestinal tract, has emerged as a significant pathogen causing urinary tract infections (UTIs) in domestic cats. The rise of multidrug-resistant E. faecalis strains and their propensity to form biofilms pose significant challenges in treatment. This study investigated the antibacterial and antibiofilm activities of hexagonal zinc oxide nanoparticles (ZnONPs) alone and in combination with streptomycin and Moringa oleifera leaf extract (MOLe) against multidrug-resistant E. faecalis isolates from feline UTIs.

Methods

Antimicrobial susceptibility testing was performed using the Kirby-Bauer disk diffusion method. Biofilm formation was assessed using the crystal violet assay, and biofilm-associated genes (sprE, gelE, fsrABC) were detected by PCR. ZnONPs, Str/ZnONPs (streptomycin-loaded ZnONPs), and Str/MOLe@ZnONPs (streptomycin and MOLe-loaded ZnONPs) were characterized using FTIR, DLS, TEM, and SEM. The antibacterial and antibiofilm activities of the synthesized nanoparticles were evaluated through time-kill assays, well diffusion assays, and gene expression analysis.

Results

A high prevalence of multidrug resistance was observed among the E. faecalis isolates, with significant resistance to ampicillin, vancomycin, and streptomycin. Characterization studies revealed the successful encapsulation of streptomycin and MOLe within the ZnONPs.In vitro assays demonstrated that Str/MOLe@ZnONPs exhibited potent antibacterial and antibiofilm activities against the tested E. faecalis strains, significantly reducing bacterial growth and biofilm formation.

Discussion

The emergence of multidrug-resistant E. faecalis strains necessitates the development of novel therapeutic strategies. This study demonstrates the promising potential of ZnONPs, particularly those loaded with streptomycin and MOLe, in combating biofilm-forming E. faecalis. The synergistic effects of the combined formulation may offer a novel approach to overcome antibiotic resistance and improve the treatment outcomes of E. faecalis UTIs in domestic cats.

Films of polylactic acid with graphene oxide-zinc oxide hybrid and Mentha longifolia essential oil: Effects on quality of refrigerated chicken fillet

This study was conducted to investigate the morphological, thermal, mechanical, FTIR, physicochemical (thickness, humidity, solubility in water and water vapor permeability) and antimicrobial properties of polylactic acid film (PLA) containing hybrid graphene oxide‑zinc oxide (GO-ZnO: 1.5 % w/v) and Mentha longifolia essential oil (ML:1 % v/v) on chicken fillet kept in the refrigerator. The studied groups were microbially (total count of mesophilic aerobic bacteria, psychrotrophic bacteria, Enterobacteriaceae, Staphylococcus aureus, and lactic acid bacteria), chemically (pH, TVB-N) and sensory (color, odor, and taste) evaluated at 8-day interval (0, 2, 5 and 8). In the examination of the morphological characteristics, the PLA film had a smooth and uniform surface and the addition of ML essential oil created a discontinuous structure and the addition of GO-ZnO led to the production of a denser and more homogeneous film. The presence of GO-ZnO increased the thickness, decreased moisture content and solubility in water, and added ML essential oil increased moisture content and decreased solubility in water (p˂0.05). The results of the mechanical evaluation showed that the addition of ML essential oil and GO-ZnO reduced elongation at break and tensile strength (p˂0.05). The addition of ML essential oil increased the thermal resistance and the addition of GO-ZnO decreased the thermal resistance compared to the film containing ML essential oil. The antimicrobial effect of films containing ML essential oil was confirmed in this study (p˂0.05). The addition of GO-ZnO did not change the count of any of the microbial groups. TVB-N showed that groups containing ML essential oil had lower levels of volatile nitrogenous bases than the control group (p˂0.05). Sensory evaluation of the studied groups showed that chicken fillets packed with films containing ML essential oil had the highest score in terms of color, smell and taste. The results of the present study showed that PLA film containing GO-ZnO and ML essential oil can be used to increase the shelf life and maintain the sensory characteristics of chicken fillets, and it can be used as a suitable packaging to increase the shelf life of food products.

Lighting the Path: Raman Spectroscopy's Journey Through the Microbial Maze

The rapid and precise identification of microorganisms is essential in environmental science, pharmaceuticals, food safety, and medical diagnostics. Raman spectroscopy, valued for its ability to provide detailed chemical and structural information, has gained significant traction in these fields, especially with the adoption of various excitation wavelengths and tailored optical setups. The choice of wavelength and setup in Raman spectroscopy is influenced by factors such as applicability, cost, and whether bulk or single-cell analysis is performed, each impacting sensitivity and specificity in bacterial detection. In this study, we investigate the potential of different excitation wavelengths for bacterial identification, utilizing a mock culture composed of six bacterial species: three Gram-positive (S. warneri, S. cohnii, and E. malodoratus) and three Gram-negative (P. stutzeri, K. terrigena, and E. coli). To improve bacterial classification, we applied machine learning models to analyze and extract unique spectral features from Raman data. The results indicate that the choice of excitation wavelength significantly influences the bacterial spectra obtained, thereby impacting the accuracy and effectiveness of the subsequent classification results.

Antibacterial Properties and Application of Bi2Sn2O7/ZnO Composite Photocatalytic Materials

In this experiment, Bi2Sn2O7/ZnO composite photocatalytic materials were synthesized by a hydrothermal method and characterized by XRD, SEM, and EDS, etc. The prepared Bi2Sn2O7/ZnO has a nanorod structure and high phase purity. The photocatalytic antimicrobial performance of Bi2Sn2O7/ZnO against bacteria and fungi under visible light was significantly better than that of single Bi2Sn2O7 and ZnO. In particular, 1000 mg/L 1 : 3 Bi2Sn2O7/ZnO showed an antimicrobial rate of more than 97 % against Escherichia coli, Staphylococcus aureus, and Candida albicans, which are widely present in the nature. The free radical trapping experiments were selected and the antimicrobial mechanism was investigated, and the results showed that the antimicrobial process of the Bi2Sn2O7/ZnO system was regulated by the free radicals such as ⋅OH, h+, and e-, which were generated by its unique photocatalytic activity. Finally, MTT cytotoxicity experiments demonstrated that the Bi₂Sn₂O₇/ZnO composite was not toxic to cells. In addition, the antimicrobial performance of Bi2Sn2O7/ZnO on real livestock wastewater and the real-life application of the prepared Bi2Sn2O7/ZnO PCL composite antibiotic film for antimicrobial treatment of freshly cut fruits' surfaces under visible light were experimentally investigated. This study provides a new idea for Bi2Sn2O7/ZnO as a photocatalytic antimicrobial agent.

Advancements in Nanoparticle-Based Strategies for Enhanced Antibacterial Interventions

The escalating global threat of antibiotic resistance underscores the urgent need for innovative antimicrobial strategies. This review explores the cutting-edge applications of nanotechnology in combating bacterial infections, addressing a critical healthcare challenge. We critically assess the antimicrobial properties and mechanisms of diverse nanoparticle systems, including liposomes, polymeric micelles, solid lipid nanoparticles, dendrimers, zinc oxide, silver, and gold nanoparticles, as well as nanoencapsulated essential oils. These nanomaterials offer distinct advantages, such as enhanced drug delivery, improved bioavailability, and efficacy against antibiotic-resistant strains. Recent advancements in nanoparticle synthesis, functionalization, and their synergistic interactions with conventional antibiotics are highlighted. The review emphasizes biocompatibility considerations, stressing the need for rigorous safety assessments in nanomaterial applications. By synthesizing current knowledge and identifying emerging trends, this review provides crucial insights for researchers and clinicians aiming to leverage nanotechnology for next-generation antimicrobial therapies. The integration of nanotechnology represents a promising frontier in combating infectious diseases, underscoring the timeliness and imperative of this comprehensive analysis.

Toxicity, Antibacterial, Antioxidant, Antidiabetic, and DNA Cleavage Effects of Dextran-Graft-Polyacrylamide/Zinc Oxide Nanosystems

Synthesis of metal oxide nanoparticles-polymer nanocomposites is an emerging strategy in nanotechnology to improve targeted delivery and reduce the toxicity of nanoparticles. In this study, we report biological effects of previously described hybrid nanocomposites containing dextran-graft-polyacrylamide/zinc oxide nanoparticles (D-PAA/ZnO NPs) prepared from zinc sulfate (D-PAA/ZnONPs(SO42-)) and zinc acetate (D-PAA/ZnONPs(-OAc)) focusing primarily on their antimicrobial activity. D-PAA/ZnONPs(SO42-) and D-PAA/ZnONPs(-OAc) nanosystems were tested in a complex way to assess their antioxidant activity (DPPH assay), antidiabetic potential (α-amylase inhibition), DNA cleavage activity, antimicrobial, and antibiofilm activity. In addition, the toxicity of D-PAA/ZnONPs(SO42-) and D-PAA/ZnONPs(-OAc) nanosystems against primary murine splenocytes was tested using MTT assay. The studied nanosystems inhibited E.coli growth. For all the investigated strains, minimum inhibitory concentrations (MICs) of D-PAA/ZnONPs(SO42-) and D-PAA/ZnONPs(-OAc) were in the range of 8 mg/L-128 mg/L and 16 mg/L-128 mg/L, respectively. The nanocomposites demonstrated effective antibiofilm properties as 94.27% and 86.43%. The compounds showed good antioxidant, anti-α-amylase, and DNA cleavage activities. D-PAA/ZnONPs(SO42-) and D-PAA/ZnONPs(-OAc) nanosystems reduced cell viability and promoted cell death of primary murine spleen cells at concentrations higher than those that proved to be antibacterial indicating the presence of therapeutic window. D-PAA/ZnONPs(SO42-) and D-PAA/ZnONPs(-OAc) nanosystems show antioxidant, antidiabetic, DNA cleavage, antimicrobial, and antibiofilm activity against the background of good biocompatibility suggesting the presence of therapeutic potential, which should be further investigated in vivo.

The Mechanism of Zinc Oxide in Alleviating Diarrhea in Piglets after Weaning: A Review from the Perspective of Intestinal Barrier Function

Weaning is one of the most challenging phases for piglets, and it is also the time when piglets are the most susceptible to diarrhea, which may result in significant economic losses for pig production. One of the dietary strategies for reducing post-weaning diarrhea (PWD) in piglets is to provide them with a pharmacological dose of zinc oxide (ZnO). However, excessive or long-term usage of high-dose ZnO has significant impacts on pig health and the ecological environment. Therefore, caution should be exercised when considering the use of high-dose ZnO for the prevention or treatment of PWD in piglets. In this paper, the significant role of zinc in animal health, the potential mode of action of ZnO in alleviating diarrhea, and the impact of innovative, highly efficient ZnO alternatives on the regulation of piglet diarrhea were reviewed to offer insights into the application of novel ZnO in pig production.

Phyto-fabricated ZnO nanoparticles for anticancer, photo-antimicrobial effect on carbapenem-resistant/sensitive Pseudomonas aeruginosa and removal of tetracycline

Alternanthera sessilis (AS) leaf extract was used to synthesize zinc oxide nanoparticles (ZnO NPs). Bioanalytical characterization techniques such as X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM) confirmed the formation of crystalline ZnO NPs with average sizes of 40 nm. The AS-ZnO NPs antimicrobial activity was analyzed under dark (D) and white light (WL) conditions. The improved antimicrobial activity was observed against Escherichia coli, Staphylococcus aureus and Bacillus subtilis at the minimal inhibitory concentration (MIC) of 125 and 62.5 µg/mL under WL than the D at 125 and 250 µg/mL for E. coli, B. subtilis, and Pseudomonas aeruginosa, respectively. In contrast, the growth of P. aeruginosa and S. aureus was not completely inhibited until 1 mg/mL AS-ZnO NPs under WL and D. Similarly, AS-ZnO NPs displayed a weaker inhibitory effect against carbapenem-sensitive P. aeruginosa (CSPA) and carbapenem-resistant P. aeruginosa (CRPA) strains of PAC023, PAC041 and PAC032, PAC045 under D. Interestingly, the distinct inhibitory effect was recorded against CSPA PAC041 and CRPA PAC032 in which the bacteria growth was inhibited 99.9% at 250, 500 µg/mL under WL. The cytotoxicity results suggested AS-ZnO NPs demonstrated higher toxicity to MCF-7 breast cancer cells than the RAW264.7 macrophage cells. Further, AS-ZnO NPs exhibited higher catalytic potential against tetracycline hydrochloride (TC-H) degradation at 65.6% and 60.8% under WL than the dark at 59.35% and 48.6% within 120 min. Therefore, AS-ZnO NPs can be used to design a photo-improved antimicrobial formulation and environmental catalyst for removing TC-H from wastewater.

Antibacterial Action of Zn2+ Ions Driven by the In Vivo Formed ZnO Nanoparticles

Antibacterial formulations based on zinc oxide nanoparticles (ZnO NPs) are widely used for antibiotic replacement in veterinary medicine and animal nutrition. However, the undesired environmental impact of ZnO NPs triggers a search for alternative, environmentally safer solutions. Here, we show that Zn2+ in its ionic form is a more eco-friendly antibacterial, and its biocidal action rivals that of ZnO NPs (<100 nm size), with a minimal biocidal concentration being 41(82) μg mL-1 vs 5 μg mL-1 of ZnO NPs, as determined for 103(106) CFU mL-1 E. coli. We demonstrate that the biocidal activity of Zn2+ ions is primarily associated with their uptake by E. coli and spontaneous in vivo transformation into insoluble ZnO nanocomposites at an internal bacterial pH of 7.7. Formed in vivo nanocomposite then damages E. coli membrane and intracellular components from the inside, by forming insoluble biocomposites, whose formation can also trigger ZnO characteristic reactions damaging the cells (e.g., by generation of high-potential reactive oxygen species). Our study defines a special route in which Zn2+ metal ions induce the death of bacterial cells, which might be common to other metal ions capable of forming semiconductor oxides and insoluble hydroxides at a slightly alkaline intracellular pH of some bacteria.

Use of nanotechnology-based nanomaterial as a substitute for antibiotics in monogastric animals

Nanotechnology has emerged as a promising solution for tackling antibiotic resistance in monogastric animals, providing innovative methods to enhance animal health and well-being. This review explores the novel use of nanotechnology-based nanomaterials as substitutes for antibiotics in monogastric animals. With growing global concerns about antibiotic resistance and the need for sustainable practices in animal husbandry, nanotechnology offers a compelling avenue to address these challenges. The objectives of this review are to find out the potential of nanomaterials in improving animal health while reducing reliance on conventional antibiotics. We examine various forms of nanomaterials and their roles in promoting gut health and also emphasize fresh perspectives brought by integrating nanotechnology into animal healthcare. Additionally, we delve into the mechanisms underlying the antibacterial properties of nanomaterials and their effectiveness in combating microbial resistance. By shedding light on the transformative role of nanotechnology in animal production systems. This review contributes to our understanding of how nanotechnology can provide safer and more sustainable alternatives to antibiotics.

Zinc oxide nanoparticles mediate bacterial toxicity in Mueller-Hinton Broth via Zn2. Front Microbiol 2024;15:1394078. [PMID: 38711974 PMCID: PMC11070567 DOI: 10.3389/fmicb.2024.1394078] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

As antibiotic resistance increases and antibiotic development dwindles, new antimicrobial agents are needed. Recent advances in nanoscale engineering have increased interest in metal oxide nanoparticles, particularly zinc oxide nanoparticles, as antimicrobial agents. Zinc oxide nanoparticles are promising due to their broad-spectrum antibacterial activity and low production cost. Despite many studies demonstrating the effectiveness of zinc oxide nanoparticles, the antibacterial mechanism is still unknown. Previous work has implicated the role of reactive oxygen species such as hydrogen peroxide, physical damage of the cell envelope, and/or release of toxic Zn2+ ions as possible mechanisms of action. To evaluate the role of these proposed methods, we assessed the susceptibility of S. aureus mutant strains, ΔkatA and ΔmprF, to zinc oxide nanoparticles of approximately 50 nm in size. These assays demonstrated that hydrogen peroxide and electrostatic interactions are not crucial for mediating zinc oxide nanoparticle toxicity. Instead, we found that Zn2+ accumulates in Mueller-Hinton Broth over time and that removal of Zn2+ through chelation reverses this toxicity. Furthermore, we found that the physical separation of zinc oxide nanoparticles and bacterial cells using a semi-permeable membrane still allows for growth inhibition. We concluded that soluble Zn2+ is the primary mechanism by which zinc oxide nanoparticles mediate toxicity in Mueller-Hinton Broth. Future work investigating how factors such as particle morphology (e.g., size, polarity, surface defects) and media contribute to Zn2+ dissolution could allow for the synthesis of zinc oxide nanoparticles that possess chemical and morphological properties best suited for antibacterial efficacy.

In vitro assessment of the anthelmintic activity of copper oxide and zinc oxide nanoparticles on egg and adult stages of Fasciola hepatica: evidence on oxidative stress biomarkers, and DNA damage

OBJECTIVES

Fasciolosis is of significant economic and public health importance worldwide. The lack of a successful vaccine and emerging resistance in flukes to the drug of choice, triclabendazole, has initiated the search for alternative approaches. In recent years, metallic nanoparticles have been extensively investigated for their anthelmintic effects. This study investigates the in vitro anthelmintic activity of copper oxide and zinc oxide nanoparticles against Fasciola hepatica.

METHODS

The in vitro study was based on egg hatchability test (EHA), adult motility inhibition tests, DNA damage, ROS levels, as well as several biomarkers of oxidative stress, including glutathione peroxidase (GSH) and glutathione S-transferase (GST), superoxide dismutase (SOD) and malondialdehyde (MDA). For this purpose, different concentrations of copper oxide nanoparticles (CuO-NPs) and Zinc oxide nanoparticles (ZnO-NPs) (1, 4, 8, 12, and 16 ppm) were used to evaluate the anthelmintic effect on different life stages, including egg and adults of Fasciola hepatica, over 24 h.

RESULTS

In vitro treatment of F. hepatica worms with both CuO-NPs and ZnO-NPs could significantly increase ROS production and oxidative stress induction (decreased SOD, GST and GSH and increased MDA) compared to control group.

CONCLUSIONS

Based on the results, it seems that CuO-NPs and ZnO-NPs may be effective in the control and treatment of F. hepatica infection. Further research is needed to investigate their potential for in vivo use in the treatment of parasitic infections.

Carbon-based materials for water disinfection and heavy metals removal

The presence of heavy metals and/or harmful bacteria in drinking water represents significant risks to human health. This study aimed to develop a low-cost water treatment technology using synthesized nanocomposites with metal nanoparticles supported on activated carbon (AC) for bacteria and heavy metal removal. In addition, the performance of the developed nanomaterials was compared with that of commercial materials - carbon fibers of three different typologies. The chemical and textural properties of all tested materials were characterized. To simulate a technology to be applied in a water outlet point, removal tests were carried out in a continuous system using suspensions of Escherichia coli and/or Staphylococcus aureus, wherein the contact time with the two phases was minimal (1 min). The obtained results revealed that iron and copper oxides supported on AC with a calcination treatment (CuFeO/AC-C) was the nanocomposite with the best performance, achieving a 6 log reduction for both bacteria in the same suspension up to 9 h operation. A mix of bacteria and heavy metals, simulating a real water, was treated with CuFeO/AC-C obtaining a 6 log reduction of bacteria, a Pb2+ removal >99.9% and Cd2+ removal between 97 and 98% over 180 passage times.

Functionalized ZnO-Based Nanocomposites for Diverse Biological Applications: Current Trends and Future Perspectives

The wide array of structures and characteristics found in ZnO-based nanostructures offers them a versatile range of uses. Over the past decade, significant attention has been drawn to the possible applications of these materials in the biomedical field, owing to their distinctive electronic, optical, catalytic, and antimicrobial attributes, alongside their exceptional biocompatibility and surface chemistry. With environmental degradation and an aging population contributing to escalating healthcare needs and costs, particularly in developing nations, there's a growing demand for more effective and affordable biomedical devices with innovative functionalities. This review delves into particular essential facets of different synthetic approaches (chemical and green) that contribute to the production of effective multifunctional nano-ZnO particles for biomedical applications. Outlining the conjugation of ZnO nanoparticles highlights the enhancement of biomedical capacity while lowering toxicity. Additionally, recent progress in the study of ZnO-based nano-biomaterials tailored for biomedical purposes is explored, including biosensing, bioimaging, tissue regeneration, drug delivery, as well as vaccines and immunotherapy. The final section focuses on nano-ZnO particles' toxicity mechanism with special emphasis to their neurotoxic potential, as well as the primary toxicity pathways, providing an overall review of the up-to-date development and future perspectives of nano-ZnO particles in the biomedicine field.

E. coli cotransport with composite colloid in unsaturated porous media: Multi-risk on migration and biomolecular response

The diversity of colloidal types and the differences in the composite ratios in porous media are important factors governing the migration and biological risk of pathogenic microorganisms in the subsurface environment. In this study, E. coli O157:H7 was subjected to co-migration experiments with different compositions of the composite colloid montmorillonite (MMT)-Fe2O3, and the biomolecular response of E. coli under the action of colloids was analyzed by Raman spectroscopy to quantify the risk of E. coli under the action of composite colloids based on both. The results showed that Fe2O3 colloids inhibited E. coli migration mainly by electrostatic adsorption and reduced E. coli metabolism. MMT colloid inhibited E. coli migration mainly by blockage, and E. coli metabolism increased, and surface macromolecules decreased to reduce E. coli adhesion. MMT-Fe2O3 complex colloids inhibited migration through electrostatic attraction between the two and formation of cohesive colloids, with reduced E. coli metabolism and insignificant biomolecular response. It was briefly assessed that the composite colloids reduced E. coli risk less strongly than single colloids, stemming from the difference in the mechanism of influence and the actual need to consider colloid interactions. This conclusion can inform the management and control of pathogen risk in porous media environments.

Enhanced antimicrobial efficacy of biogenic ZnO nanoparticles through UV-B activation: A novel approach for textile garment

Zinc oxide nanoparticles (ZnO NP) are characterized by novel properties which have been attracting the attention of different lines of research due to their wide applicability. Obtaining this nanomaterial is strongly linked to biogenic synthesis methods, which have also been developed in this research, using Coriandrum sativum extract as a reducing agent. ZnO NPs have been properly characterized by techniques to evaluate their morphology by transmission electron microscopy (TEM) and elemental analysis by EDX. The evaluation of the antimicrobial and antifungal effects is linked to the use of a system provided by "locker sanitizer" equipment, which has been designed and built as part of this research, and is intended to treat textile garments by nebulizing the ZnO NP colloid (99.08 μg/mL) + UV-B, water + UV-B, and UV-B only, and also to evaluate the influence of the treatment time for 1, 2 and 3 min. In this sense, it is known that the nanomaterial used shows a better response to UV light because more hydroxyl radicals are produced, leading to a higher reaction rate, which results in greater efficiency in inhibitory processes. The results show that the use of the locker sanitizer is more efficient when using ZnO NP + UV-B light since it achieved 100 % growth inhibition against E. coli, C. albicans, and A. brasiliensis, and >99 % against S. aureus, after 3 min of treatment.

A Holistic Review of 3-Dimethylamino-1-Arylpropenones Based Disperse Dyes for Dyeing Polyester Fabrics: Synthesis, Characterization, and Antimicrobial Activities

The enaminone compounds 3-Dimethylamino-1-arylpropenones produced in this review was synthesized by reacting para-methylacetophenone and para-nitroacetophenone with dimethylformamide dimethyl acetal. In this review article, we discuss how to create novel disperse colors by reacting enaminone derivatives 3a and 3b with phenyldiazonium salt. The highly productive procedure of creating new disperse dyes was followed by the process of dyeing polyester fabrics at temperatures between 70 and 130 °C. As a result, the colours' resistance to light, rubbing, perspiration, and washing fastness was assessed. In an effort to show the additional value of these dyes, the expected biological activity of the synthetic dyes against fungus, yeast, and Gram-positive and Gram-negative bacteria was also assessed. We have applied zinc oxide nanoparticles for polyester fabrics treatment to impact them a self-cleaning quality, increase their light fastness, enhance their antibacterial efficacy, and enhance UV protection as part of our ongoing strategy to obtain polyester fabrics with newly acquired specifications.

Synthesis and characterization of 4-nitro benzaldehyde with ZnO-based nanoparticles for biomedical applications

Globally, cancer is the leading cause of death and morbidity, and skin cancer is the most common cancer diagnosis. Skin problems can be treated with nanoparticles (NPs), particularly with zinc oxide (ZnO) NPs, which have antioxidant, antibacterial, anti-inflammatory, and anticancer properties. An antibacterial activity of zinc oxide nanoparticles prepared in the presence of 4-nitrobenzaldehyde (4NB) was also tested in the present study. In addition, the influence of synthesized NPs on cell apoptosis, cell viability, mitochondrial membrane potential (MMP), endogenous reactive oxygen species (ROS) production, apoptosis, and cell adhesion was also examined. The synthesized 4-nitro benzaldehyde with ZnO (4NBZnO) NPs were confirmed via characterization techniques. 4NBZnO NPs showed superior antibacterial properties against the pathogens tested in antibacterial investigations. As a result of dose-based treatment with 4NBZnO NPs, cell viability, and MMP activity of melanoma cells (SK-MEL-3) cells were suppressed. A dose-dependent accumulation of ROS was observed in cells exposed to 4NBZnO NPs. As a result of exposure to 4NBZnO NPs in a dose-dependent manner, viable cells declined and apoptotic cells increased. This indicates that apoptotic cell death was higher. The cell adhesion test revealed that 4NBZnO NPs reduced cell adhesion and may promote apoptosis of cancer cells because of enhanced ROS levels.

Nanotechnology in the Diagnosis and Treatment of Antibiotic-Resistant Infections

The development of antimicrobial resistance (AMR), along with the relative reduction in the production of new antimicrobials, significantly limits the therapeutic options in infectious diseases. Thus, novel treatments, especially in the current era, where AMR is increasing, are urgently needed. There are several ongoing studies on non-classical therapies for infectious diseases, such as bacteriophages, antimicrobial peptides, and nanotechnology, among others. Nanomaterials involve materials on the nanoscale that could be used in the diagnosis, treatment, and prevention of infectious diseases. This review provides an overview of the applications of nanotechnology in the diagnosis and treatment of infectious diseases from a clinician's perspective, with a focus on pathogens with AMR. Applications of nanomaterials in diagnosis, by taking advantage of their electrochemical, optic, magnetic, and fluorescent properties, are described. Moreover, the potential of metallic or organic nanoparticles (NPs) in the treatment of infections is also addressed. Finally, the potential use of NPs in the development of safe and efficient vaccines is also reviewed. Further studies are needed to prove the safety and efficacy of NPs that would facilitate their approval by regulatory authorities for clinical use.

Antibacterial Activity and Mechanisms of Action of Inorganic Nanoparticles against Foodborne Bacterial Pathogens: A Systematic Review

Foodborne disease outbreaks due to bacterial pathogens and their toxins have become a serious concern for global public health and security. Finding novel antibacterial agents with unique mechanisms of action against the current spoilage and foodborne bacterial pathogens is a central strategy to overcome antibiotic resistance. This study examined the antibacterial activities and mechanisms of action of inorganic nanoparticles (NPs) against foodborne bacterial pathogens. The articles written in English were recovered from registers and databases (PubMed, ScienceDirect, Web of Science, Google Scholar, and Directory of Open Access Journals) and other sources (websites, organizations, and citation searching). "Nanoparticles," "Inorganic Nanoparticles," "Metal Nanoparticles," "Metal-Oxide Nanoparticles," "Antimicrobial Activity," "Antibacterial Activity," "Foodborne Bacterial Pathogens," "Mechanisms of Action," and "Foodborne Diseases" were the search terms used to retrieve the articles. The PRISMA-2020 checklist was applied for the article search strategy, article selection, data extraction, and result reporting for the review process. A total of 27 original research articles were included from a total of 3,575 articles obtained from the different search strategies. All studies demonstrated the antibacterial effectiveness of inorganic NPs and highlighted their different mechanisms of action against foodborne bacterial pathogens. In the present study, small-sized, spherical-shaped, engineered, capped, low-dissolution with water, high-concentration NPs, and in Gram-negative bacterial types had high antibacterial activity as compared to their counterparts. Cell wall interaction and membrane penetration, reactive oxygen species production, DNA damage, and protein synthesis inhibition were some of the generalized mechanisms recognized in the current study. Therefore, this study recommends the proper use of nontoxic inorganic nanoparticle products for food processing industries to ensure the quality and safety of food while minimizing antibiotic resistance among foodborne bacterial pathogens.

An Emerging Foodborne Pathogen Spotlight: A Bibliometric Analysis and Scholarly Review of Escherichia coli O157 Research

Foodborne infections pose a substantial global threat, causing an estimated 600 million illnesses and resulting in approximately 420,000 deaths annually. Among the diverse array of pathogens implicated in these infections, Escherichia coli (E. coli), specifically the O157 strain (E. coli O157), emerges as a prominent pathogen associated with severe outbreaks. This study employs a comprehensive bibliometric analysis and scholarly review focused on E. coli O157 research. The bibliometric analysis highlights the significant role played by the United States in the E. coli O157 research domain. Further exploration underscores the noteworthy contributions of the researcher Doyle MP, whose body of work, consisting of 84 documents and an impressive H-Index of 49, reflects their substantial impact in the field. Recent research trends indicate a discernible shift towards innovative detection methods, exemplified by the adoption of CRISPR-CAS and Loop-Mediated Isothermal Amplification. Moreover, high-throughput whole-genome sequencing techniques are gaining prominence for the expeditious analysis of pathogenic E. coli strains. Scientists are increasingly exploring antimicrobial agents, including phage therapy, to address the challenges posed by antibiotic-resistant E. coli strains, thereby addressing critical concerns related to multi-drug resistance. This comprehensive analysis provides vital insights into the dynamic landscape of E. coli O157 research. It serves as a valuable resource for researchers, policymakers, and healthcare professionals dedicated to mitigating E. coli O157 outbreaks and advancing global public health strategies.

Investigation of ternary Zn-Co-Fe layered double hydroxide as a multifunctional 2D layered adsorbent for moxifloxacin and antifungal disinfection

Layered double hydroxides have recently gained wide interest as promising multifunctional nanomaterials. In this work, a multifunctional ternary Zn-Co-Fe LDH was prepared and characterized using XRD, FTIR, BET, TEM, SEM, and EDX. This LDH showed a typical XRD pattern with a crystallite size of 3.52 nm and a BET surface area of 155.9 m2/g. This LDH was investigated, for the first time, as an adsorbent for moxifloxacin, a common fluoroquinolones antibiotic, showing a maximum removal efficiency and equilibrium time of 217.81 mg/g and 60 min, respectively. Its antifungal activity, for the first time, was investigated against Penicillium notatum, Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger, and Mucor fungi at various concentrations (1000-1.95 µg/mL). This LDH was found to be effective against a variety of fungal strains, particularly Penicillium and Mucor species and showed zones of inhibition of 19.3 and 21.6 mm for Penicillium and Mucor, respectively, with an inhibition of 85% for Penicillium species and 68.3% for Mucormycosis. The highest antifungal efficacy results were obtained at very low MIC concentrations (33.3 and 62 µg/ml) against Penicillium and Mucor, respectively. The results of this study suggest a promising multifunctional potential of this LDH for water and wastewater treatment and disinfection applications.

New insights into nanotherapeutics for periodontitis: a triple concerto of antimicrobial activity, immunomodulation and periodontium regeneration

Periodontitis is a chronic inflammatory disease caused by the local microbiome and the host immune response, resulting in periodontal structure damage and even tooth loss. Scaling and root planning combined with antibiotics are the conventional means of nonsurgical treatment of periodontitis, but they are insufficient to fully heal periodontitis due to intractable bacterial attachment and drug resistance. Novel and effective therapeutic options in clinical drug therapy remain scarce. Nanotherapeutics achieve stable cell targeting, oral retention and smart release by great flexibility in changing the chemical composition or physical characteristics of nanoparticles. Meanwhile, the protectiveness and high surface area to volume ratio of nanoparticles enable high drug loading, ensuring a remarkable therapeutic efficacy. Currently, the combination of advanced nanoparticles and novel therapeutic strategies is the most active research area in periodontitis treatment. In this review, we first introduce the pathogenesis of periodontitis, and then summarize the state-of-the-art nanotherapeutic strategies based on the triple concerto of antibacterial activity, immunomodulation and periodontium regeneration, particularly focusing on the therapeutic mechanism and ingenious design of nanomedicines. Finally, the challenges and prospects of nano therapy for periodontitis are discussed from the perspective of current treatment problems and future development trends.

Development of basil seed mucilage (a heteropolysaccharide) - Polyvinyl alcohol biopolymers incorporating zinc oxide nanoparticles

The effect of zinc oxide nanoparticles (ZnONPs) on various properties of basil seed mucilage (a heteropolysaccharide)-polyvinyl alcohol (BSM-PVA) films was investigated. Increasing concentration of ZnONPs in BSM-PVA films reduced moisture content (from 24.73 to 17.09 %), water solubility (from 36.36 to 27.65 %), water vapor permeability (from 4.66 × 10-7 to 2.55 × 10-7 g·m/m2·Pa·h), oxygen permeability (from 2.96 to 2.13 cm3 μm/m2 d kPa), and elongation at break (from 40.34 to 29.44 %), and increased ultimate tensile strength (from 16.81 to 21.48 MPa). Color and light transmission were affected by ZnONPs concentrations. The lack of formation of new peaks, along with the displacement of peaks, indicated the formation of hydrogen bonds between ZnONPs and the film matrix. Dynamic mechanical-thermal analysis showed that storage modulus and glass transition temperature increased with the concentration of ZnONPs. Scanning electron microscopy images illustrated that the addition of ZnONPs improved film integrity. X-ray diffraction pattern showed that the crystal shape of nanoparticles was preserved in the film matrix. Films containing ZnONPs showed good antibacterial activity against Staphylococcus aureus (reductions ≥ 3 log CFU/cm2) and Escherichia coli (reductions ≥ 4 log CFU/cm2). Films containing ZnONPs also showed a suitable antifungal activity during the storage of wheat bread.

Novel Zinc/Silver Ions-Loaded Alginate/Chitosan Microparticles Antifungal Activity against Botrytis cinerea

Addressing the growing need for environmentally friendly fungicides in agriculture, this study explored the potential of biopolymer microparticles loaded with metal ions as a novel approach to combat fungal pathogens. Novel alginate microspheres and chitosan/alginate microcapsules loaded with zinc or with zinc and silver ions were prepared and characterized (microparticle size, morphology, topography, encapsulation efficiency, loading capacity, and swelling behavior). Investigation of molecular interactions in microparticles using FTIR-ATR spectroscopy exhibited complex interactions between all constituents. Fitting to the simple Korsmeyer-Peppas empirical model revealed the rate-controlling mechanism of metal ions release from microparticles is Fickian diffusion. Lower values of the release constant k imply a slower release rate of Zn2+ or Ag+ ions from microcapsules compared to that of microspheres. The antimicrobial potential of the new formulations against the fungus Botrytis cinerea was evaluated. When subjected to tests against the fungus, microspheres exhibited superior antifungal activity especially those loaded with both zinc and silver ions, reducing fungal growth up to 98.9% and altering the hyphal structures. Due to the slower release of metal ions, the microcapsule formulations seem suitable for plant protection throughout the growing season. The results showed the potential of these novel microparticles as powerful fungicides in agriculture.

SERS study of classical and newly β-lactams-metal complexation based on in situ laser-induced coral reefs-like silver photomicroclusters: In vitro study of antibacterial activity

The influence of metal complexation of two polar β-lactam antibiotics was investigated using surface enhanced Raman spectroscopy (SERS) technique. SERS method was applied to track the structural changes and the degradation behaviour of the studied compounds upon Zinc (II) ions-complexation. In situ laser-induced coral reefs-like photomicroclusters have been utilized as a SERS platform. The produced coral reefs-like photomicroclusters were characterized using scanning electron microscopy (SEM) and transmission electron microscope (TEM). The antibacterial efficiency of the antibiotics was investigated and compared before and after metal complexation using two techniques; agar well diffusion and growth curve. To provide a detailed elucidation of the complexation reaction, mass fragmentation of metal- antibiotics complexes was investigated using liquid chromatography/mass spectrometric (LC/MS) technique. It was found that metal complexation of classical β-lactam antibiotic (Ticarcillin) promoted the rate of its degradation, leading to a decrease of the antibacterial efficiency. On the other side, the antibacterial activity of the newly developed β-lactam (Faropenem) has been greatly enhanced via metal-complexation reaction.

Photodynamic Cationic Ultrasmall Copper Oxide Nanoparticles-Loaded Liposomes for Alleviation of MRSA Biofilms

Introduction

As we enter the post-antibiotic era, the rise of antibiotic-resistant pathogenic bacteria is becoming a serious threat to public health. This problem is further complicated by antibiotic-resistant biofilms, for which current treatment options are limited.

Methods

To tackle this challenge, we propose a novel approach that involves the use of photodynamic cationic pH-sensitive liposomes loaded with ultra-small copper oxide (Ce6@Lipo/UCONs) to effectively eliminate drug-resistant bacteria and eradicate biofilms while minimizing safety concerns and the risk of resistance development.

Results

Our study demonstrates that Ce6@Lipo/UCONs have minimal toxicity to mammalian cells and can significantly enhance the association affinity with methicillin-resistant Staphylococcus aureus (MRSA) as confirmed by fluorescent microscope and flow cytometry, thereby greatly improving the bactericidal effect against planktonic MRSA. The cationic nature of Ce6@Lipo/UCONs also enables them to penetrate MRSA biofilms and respond to the acidic microenvironment within the biofilm, effectively releasing the loaded UCONs. Our results indicate that Ce6@Lipo/UCONs could effectively eliminate biofilms under light irradiation conditions, as evidenced by both biomass analysis and scanning electron microscopy observations. In addition, significant antibacterial effects and abscess healing were observed in MRSA-infected mice treated with Ce6@Lipo/UCONs upon light irradiation, while good biocompatibility was achieved in vivo.

Conclusion

Taken together, our findings suggest that photodynamic cationic ultrasmall copper oxide nanoparticles-loaded liposomes are a highly promising nano platform for combating antibiotic-resistant microbial pathogens and biofilms. The effective biofilm penetration and synergistic effect between photodynamic inactivation and metal sterilization make them a valuable tool for overcoming the challenges posed by antibiotic resistance.

Evaluating Antimicrobial Effectiveness of Gold Nanoparticles against Streptococcus oralis

Biofilm includes many microorganisms that causes the periodontal diseases. The increased drugs resistance against the infectious diseases is a major issue owing to excessive using of a broad spectrum of antibiotics. Recently, metallic nanoparticles (NPs) are being administered to control the growth of different types of microorganisms. For instance, gold nanoparticles (Au NPs) are found to be successful to control and limit the bacterial pathogenicity in the oral cavity without any cytotoxic effects on the human body. Aim. In this paper, it was aimed to detect the antibacterial effect of Au NPs and compare with chlorhexidine (CHX) against Streptococcus oralis (S. oralis) in dental plaque of patients with chronic periodontitis. Materials and Methods. First, supragingival and subgingival plaque samples were collected from the patients suffering from periodontal disease and incubated under aerobic or/and anaerobic conditions. Second, the morphological examination, and biochemical test by Vitec 2 machine are used to confirm the S. oralis species. Third, the synthesis of Au NPs was carried out by seed growth method and their properties were characterized. Finally, the antimicrobial effect of the Au NPs against S. oralis was evaluated by Agar well diffusion method for different Au NPs concentrations (100, 50, 25, 12.5, 6.25, 3.125, 1.562, 0.781, 0.391, 0.195, and 0.097 ppm). CHX was used as the positive control and distilled water as the negative control. The antibacterial activity data were statistically analyzed by least significant difference (LSD) using the Statistical Program for Social Science (SPSS) version 22. Results. The Au NPs with an average particles size of 43 nm, polycrystalline face-centered cubic structure were characterized. The Au NPs at 100 ppm concentration had similar antibacterial effect of CHX for inhibiting the growth of S. oralis, with no significant difference. Conclusions. The Au NPs as an antibacterial agent could be equally effective against S. oralis similar to the CHX when used at higher concentration.

Influence of Synthesis Conditions on the Properties of Zinc Oxide Obtained in the Presence of Nonionic Structure-Forming Compounds

This work investigated the influence of synthesis conditions, including the use of nonionic structure-forming compounds (surfactants) with different molecular weights (400-12,600 g/mol) and various hydrophilic/hydrophobic characteristics, as well as the use of a glass substrate and hydrothermal exposure on the texture and structural properties of ZnO samples. By X-ray analysis, it was determined that the synthesis intermediate in all cases is the compound Zn5(OH)8(NO3)2∙2H2O. It was shown that thermolysis of this compound at 600 °C, regardless of the physicochemical properties of the surfactants, leads to the formation of ZnO with a wurtzite structure and spherical or oval particles. The particle size increased slightly as the molecular weight and viscosity of the surfactants grew, from 30 nm using Pluronic F-127 (MM = 12,600) to 80 nm using Pluronic L-31 (MM = 1100), PE-block-PEG (MM = 500) and PEG (MM = 400). Holding the pre-washed synthetic intermediates (Zn5(OH)8(NO3)2∙2H2O) under hydrothermal conditions resulted in the formation of hexagonal ZnO rod crystal structures of various sizes. It was shown that the largest ZnO particles (10-15 μm) were observed in a sample obtained during hydrothermal exposure using Pluronic P-123 (MM = 5800). Atomic adsorption spectroscopy performed comparative quantitative analysis of residual Zn2+ ions in the supernatant of ZnO samples with different particle sizes and shapes. It was shown that the residual amount of Zn2+ ions was higher in the case of examining ZnO samples which have spherical particles of 30-80 nm. For example, in the supernatant of a ZnO sample that had a particle size of 30 nm, the quantitative content of Zn2+ ions was 10.22 mg/L.

Antibacterial mechanism of vanillin against Escherichia coli O157: H7

Vanillin, a plant-derived antimicrobial volatile substance, has potential microbial control applications in the food industry. However, the effect of vanillin on the food-borne pathogen Escherichia coli (E. coli) O157:H7 has not been well studied. This study aims to explore the antibacterial mechanism of vanillin against E. coli O157:H7. The minimum inhibitory concentration (MIC) and antibacterial effect of vanillin were determined by microdilution. Scanning electron microscopy (SEM) was used to observe the damage of vanillin to the cell membrane, while cell membrane potential and the leakage of nucleic acid protein were measured to explore the effect of vanillin on the membrane system. Confocal laser scanning and intracellular adenosine triphosphate (ATP) concentration determination were utilized to investigate the effects of vanillin on the energy, life, and death of E. coli. Finally, transcriptome sequencing was conducted to investigate the gene expression differences induced by vanillin treatment. The results showed that vanillin treatment effectively controlled E. coli O157:H7 with an MIC of 2 mg/mL. After treatment, damage to the membrane system, depolarization of the membrane, and leakage of nucleic acid and protein were observed. Meanwhile, vanillin treatment caused decreased ATP content and cell death. Transcriptome analysis showed that vanillin treatment significantly affected the expression of genes involved in cell membrane formation, tricarboxylic acid (TCA) cycling pathway, and oxidative phosphorylation pathway in E. coli O157:H7. In conclusion, membrane damage and energy metabolism disruption are important mechanisms of vanillin's inhibitory effect on E. coli O157:H7. This study provides new insights into the molecular reaction mechanism of vanillin against E. coli O157:H7, highlighting its potential as an antibacterial substance for preventing E. coli contamination in the food industry.

Instantaneous Inactivation of Herpes Simplex Virus by Silicon Nitride Bioceramics

Hydrolytic reactions taking place at the surface of a silicon nitride (Si3N4) bioceramic were found to induce instantaneous inactivation of Human herpesvirus 1 (HHV-1, also known as Herpes simplex virus 1 or HSV-1). Si3N4 is a non-oxide ceramic compound with strong antibacterial and antiviral properties that has been proven safe for human cells. HSV-1 is a double-stranded DNA virus that infects a variety of host tissues through a lytic and latent cycle. Real-time reverse transcription (RT)-polymerase chain reaction (PCR) tests of HSV-1 DNA after instantaneous contact with Si3N4 showed that ammonia and its nitrogen radical byproducts, produced upon Si3N4 hydrolysis, directly reacted with viral proteins and fragmented the virus DNA, irreversibly damaging its structure. A comparison carried out upon testing HSV-1 against ZrO2 particles under identical experimental conditions showed a significantly weaker (but not null) antiviral effect, which was attributed to oxygen radical influence. The results of this study extend the effectiveness of Si3N4's antiviral properties beyond their previously proven efficacy against a large variety of single-stranded enveloped and non-enveloped RNA viruses. Possible applications include the development of antiviral creams or gels and oral rinses to exploit an extremely efficient, localized, and instantaneous viral reduction by means of a safe and more effective alternative to conventional antiviral creams. Upon incorporating a minor fraction of micrometric Si3N4 particles into polymeric matrices, antiherpetic devices could be fabricated, which would effectively impede viral reactivation and enable high local effectiveness for extended periods of time.

Design and development of molten metal nanomaterials using sonochemistry for multiple applications

Molten metals have prospective applications as soft fluids with unique physical and chemical properties, yet materials based on them are still in their infancy and have great potential. Ultrasonic irradiation of molten metals in liquid media induces acoustic cavitation and dispersion of the liquid metal into micrometric and nanometric spheres. This review focuses on the synthesis of mmetallic materials via sonochemistry from molten metals with low melting point (< 420 ᴼC): Ga, Hg, In, Sn, Bi, Pb, and Zn, which can be melted in organic or inorganic media or water and of aqueous solutions of metallic ions to form two immiscible liquid phases. Organic molecule entrapment, polymer solubilization, chiral imprinting, and catalyst incorporation within metals or metallic particles were recently developed to provide novel hybrid nanomaterials for several applications including catalysis, fuel cells, and biomass-to-biofuel conversion. In all cases where molten metal was sonicated in an organic solvent, in addition to a solid precipitant, an interesting supernatant was obtained that contained metal-doped carbon dots (M@C-dots). Some of these M@C-dots were found to exhibit highly effective antimicrobial activity, promote neuronal tissue growth, or have utility in lithium-ion rechargeable batteries. The economic feasibility and commercial scalability of molten metal sonochemistry attract fundamental interest in the reaction mechanisms, as the versatility and controllability of the structure and material properties invite exploration of various applications.

Hydrogen Bonds as Stability-Controlling Elements of Spherical Aggregates of ZnO Nanoparticles: A Joint Experimental and Theoretical Approach

The effects of various organic additives, such as diethanolamine (DEA) and ethanolamine (EA), and variations in aging times on the formation and stability mechanisms of spherical aggregates of ZnO nanoparticles (NPs) prepared by using solvothermal synthesis were studied. The experimental results of the structural, morphological and optical properties monitored by using X-ray diffraction, field-emission scanning electron microscopy (FE-SEM) and UV-Vis spectroscopy were supported by quantum chemical calculations at the level of density functional theory (DFT). Understanding the mechanism of spherical ZnO aggregate formation and its stability by mimicking the processes at the computer level was achieved through theoretical simulations of the ZnO surface/additive interactions using (ZnO)₃₆-DEA and (ZnO)₃₆-EA models. The fine-tuned spherical aggregation of ZnO nanoparticles was driven by various interactions, in particular, strong O-H∙∙∙O and weak N-H∙∙∙O hydrogen bonds as controlling interactions. The calculated negative free release energy, ∆G*_INT, indicates that the ZnO surface/additive interaction in diethanolamine media is a spontaneous exergonic process (∆G*_INT = -7.73 kcal mol^-1), whereas, in ethanolamine media, it is an unfavorable, slightly endergonic process (∆G*_INT > 0). The presence of two strong O-H∙∙∙O hydrogen bonds and, at the same time, a weaker N-H∙∙∙O hydrogen bond is the key factor for the very good and long-term aggregate stability of ZnO NPs in DEA media. This integrated experimental-theoretical study highlights the stability and compactness of spherical ZnO aggregates of ZnO NPs, prepared in the presence of diethanolamine compared to ethanolamine media, and provides a promising method and flexible design of ZnO nanomaterials to improve their adsorptive and optical properties.

New Hydrogels Nanocomposites Based on Chitosan, 2-Formylphenylboronic Acid, and ZnO Nanoparticles as Promising Disinfectants for Duodenoscopes Reprocessing

New hydrogels nanocomposites, based on iminoboronate hydrogels and ZnO nanoparticles (ZnO-NPs), were obtained and characterised in order to develop a new class of disinfectants able to fight the nosocomial infections produced by duodenoscopes investigation procedures. The formation of the imine linkages between chitosan and the aldehyde was demonstrated using NMR and FTIR spectroscopy, while the supramolecular architecture of the developed systems was evaluated via wide-angle X-ray diffraction and polarised optical microscopy. The morphological characterisation of the systems via scanning electron microscopy revealed the highly porous structure of the materials, in which no ZnO agglomeration could be observed, indicating the very fine and homogenous encapsulation of the nanoparticles into the hydrogels. The newly synthetised hydrogels nanocomposites was proven to have synergistic antimicrobial properties, being very efficient as disinfectants against reference strains as: Enterococcus faecalis, Klebsiella pneumoniae, and Candida albicans.

Review on Additives in Hydrogels for 3D Bioprinting of Regenerative Medicine: From Mechanism to Methodology

The regeneration of biological tissues in medicine is challenging, and 3D bioprinting offers an innovative way to create functional multicellular tissues. One common way in bioprinting is bioink, which is one type of the cell-loaded hydrogel. For clinical application, however, the bioprinting still suffers from satisfactory performance, e.g., in vascularization, effective antibacterial, immunomodulation, and regulation of collagen deposition. Many studies incorporated different bioactive materials into the 3D-printed scaffolds to optimize the bioprinting. Here, we reviewed a variety of additives added to the 3D bioprinting hydrogel. The underlying mechanisms and methodology for biological regeneration are important and will provide a useful basis for future research.

Bifunctional electrospun poly (L-lactic acid) membranes incorporating black phosphorus nanosheets and nano-zinc oxide for enhanced biocompatibility and antibacterial properties in catheter materials

For several decades, urinary tract infections caused by catheter-associated devices have negatively impacted not only medical device utilization, but also patient health. As such, the creation of catheter materials with both superior biocompatibility and antibacterial properties has become necessary. This study aimed to produce electrospun membranes based on polylactic acid (PLA) with the incorporation of black phosphorus nanosheets (BPNS) and nano-zinc oxide (nZnO) particles, as well as a mixture of both, in order to design bifunctional membranes with enhanced bioactivity and antibacterial features. The optimum spinning process was determined through examination of various PLA mass concentrations, spinning solution propelling speeds, and receiving drum rotating speeds, with emphasis on the mechanical properties of PLA membranes. Additionally, the antibacterial properties and cytocompatibility of the ZnO-BP/PLA antibacterial membranes were explored. Results demonstrated that the ZnO-BP/PLA antibacterial membranes displayed a rich porous structure, with uniform distribution of nZnO particles and BPNS. With the increase of polylactic acid concentration and the decrease of spinning solution advancing and drum rotation speeds, the mechanical properties of the fiber membrane were significantly improved. Furthermore, the composite membranes exhibited remarkable photothermal therapy (PTT) capabilities when aided by the synergistic effect of BP nanosheets and ZnO. This was achieved through near-infrared (NIR) irradiation, which not only dissipated the biofilm but also enhanced the release capability of Zn²⁺. Consequently, the composite membrane demonstrated an improved inhibitory effect on both Escherichia coli and Staphylococcus aureus. The results of cytotoxicity and adhesion experiments also indicated good cytocompatibility, with cells growing normally on the surface of the ZnO-BP/PLA antibacterial membrane. Overall, these findings validate the utilization of both BPNS and n-ZnO fillers in the creation of novel bifunctional PLA-based membranes, which possess both biocompatibility and antibacterial properties for interventional catheter materials.

In Vitro and In Vivo Studies of Antibacterial Coatings on Titanium Alloy Implants for Veterinary Application

The aim of this work was the evaluation of biological properties of hybrid coatings modified with Ag, Cu, and Zn nanoparticles (NPs) applied on TPLO medical implants by the sol-gel process. The implant coatings enriched with various concentrations of metallic NPs were investigated in the in vitro bactericidal efficacy tests against Gram+ and Gram- bacteria and pathogenic yeast. Next, the designed materials were tested on human osteosarcoma cell lines. The cells adhesion, proliferation, viability, and differentiation were investigated. The cell growth wasevaluated using SEM, and the metallic ion release was measured. The results revealed that the NPs concentration in the hybrid layers decreased with the incubation time. In the last stage, the implants were tested in vivo on six canine patients. Three months after the operation, the radiological evaluation of the performed anastomosis was carried out as well as the histopathological evaluation of tissue regeneration. The strongest bactericidal efficacy was observed for the layers containing AgNPs. Along with an increased concentration of metallic additives, a growing toxic effect was clearly observed. The most pronounced toxic effect was especially evident with the AgNPs concentration exceeding 1 mol %. In all the operated patients, no deviations were found during the follow-up examinations in the postoperative period. The low dose of AgNPs in the hybrid layer facilitated the tissue healing process. It was proven that silver nanoparticles may accelerate the bone healing process. The correct tissue reparation was observed.

Atomic layer deposition of ZnO on polypropylene nonwovens for photocatalytic antibacterial facemasks

Addressing respiratory infectious diseases remains one of the main priorities due to the increased risk of exposure caused by population growth, increasing international travel and commerce, and most recently, the COVID-19 outbreak. In the war against respiratory diseases, facemasks are powerful tools to obstruct the penetration of microorganisms, thereby protecting the wearer from infections. Nonetheless, the intercepted microorganisms on the surface of facemasks may proliferate and lead to secondary infection. To solve this problem, atomic layer deposition is introduced to deposit uniform and mechanically robust ZnO layers on polypropylene (PP) nonwoven fabrics, a widely used raw material in fabricating facemasks. The loading of ZnO demonstrates no adverse effects on the separation performance of facemasks, and the filtration efficiency of the facemasks towards different types of nanoparticles remains higher than 98.9%. Moreover, the modified PP nonwoven fabrics are granted with excellent antibacterial activity and photocatalytic sterilization ability, which can inactivate both germ-negative and germ-positive bacteria (E. coliandS. aureus) effectively with and without light illumination. Therefore, the modified PP nonwoven fabrics are potential candidates to be used as the outer layer on facemasks and endow them with photocatalytic antibacterial activity.

Role and Mechanism of Cold Plasma in Inactivating Alicyclobacillus acidoterrestris in Apple Juice

A. acidoterrestris has been identified as the target bacterium in fruit juice production due to its high resistance to standard heat treatment. Multiple studies have shown that cold plasma can effectively inactivate pathogenic and spoilage microorganisms in juices. However, we are aware of only a few studies that have used cold plasma to inactivate A. acidoterrestris. In this study, the inactivation efficacy of cold plasma was determined using the plate count method and described using a biphasic model. The effects of the food matrix, input power, gas flow rate, and treatment time on inactivation efficacy were also discovered. Scavenging experiments with reactive oxygen species (•OH, •O2−, and 1O2), scanning electron microscopy (SEM), Raman spectra, as well as an in vitro toxicology assay kit, were used to determine the inactivation mechanism. According to the plate count method, a maximum reduction of 4.14 log CFU/ mL could be achieved within 7 s, and complete inactivation could be achieved within 240 s. The scavenging experiments showed that directly cold plasma-produced singlet oxygen plays the most crucial role in inactivation, which was also confirmed by the fluorescence probe SOSG. The scanning electron microscopy (SEM) and Raman spectra showed that the cold plasma treatment damaged the membrane integrity, DNA, proteins, lipids, and carbohydrates of A. acidoterrestris. The plate count results and the apple juice quality evaluation showed that the cold plasma treatment (1.32 kV) could inactivate 99% of A. acidoterrestris within 60 s, with no significant changes happening in apple juice quality, except for slight changes in the polyphenol content and color value.

Antimicrobial properties of heterojunction BiSnSbO6-ZnO composites in wastewater treatment

BiSnSbO6-ZnO composite photocatalytic material with type II heterojunction structure was synthesized by a simple solid-phase sintering method, it was characterized by XRD, UV-vis, and PT methods. The photocatalytic antibacterial experiments were carried out under LED light irradiation. The experimental results showed that the photocatalytic antibacterial properties of BiSnSbO6-ZnO composites against bacteria and fungi were significantly stronger than those of single BiSnSbO6 and ZnO. Under light conditions, the antibacterial efficiencies of 500 mg/L BiSnSbO6-ZnO composites against E. coli, S. aureus, and P. aeruginosa reached 99.63%, 100%, and 100% for 6 h, 4 h, and 4 h, respectively. The best antibacterial concentration of BiSnSbO6-ZnO composite against the eukaryotic microorganism Candida albicans was 250 mg/L, and the antibacterial efficiency reached the highest 63.8% at 6 h. Antibacterial experiments were carried out on domestic livestock and poultry wastewater, which showed that the BiSnSbO6-ZnO composite photocatalytic material has broad-spectrum antibacterial activity against bacteria, and the antibacterial effect has species differences. Through the MTT experiment, it is proved that the prepared BiSnSbO6-ZnO composite photocatalytic material has no toxicity at the experimental concentration. According to the free radical scavenging experiment and SEM observation of the morphological changes of the bacteria after light treatment, the prepared BiSnSbO6-ZnO composite photocatalytic material can generate active species OH, h+, and e- through light irradiation to achieve the purpose of sterilization, where e- play a major role, indicating that the BiSnSbO6-ZnO composite photocatalytic material has broad application prospects in the actual antibacterial field.

One-step immunoassay based on filtration for detection of food poisoning-related bacteria

A one-step immunoassay based on filtration was presented, which used microbeads for target analyte detection and filters with appropriate pore sizes to distinguish the complexity of target analyte and microbeads. For effective bacterial detection, the microbead size and the filter's pore size must be optimized. The optimal concentrations of the enzyme (urease) and antibody were determined at the maximum absorbance change, that is, the maximum pH change. The pH change was measured using a field-effect transistor (FET). The correlation between pH change and threshold voltage was estimated to be 21.7 mV/pH, and the correlation between pH change and the source-drain current was estimated to be -379 nA/pH. For the one-step immunoassay, antibodies against target bacteria were isolated from horse serum by filtration, and these antibodies were estimated to have a sufficiently high specificity to overcome cross-reactivity among five types of food poisoning-related bacteria: Escherichia coli O157, Salmonella typhimurium, Listeria monocytogenes, Bacillus cereus, and Staphylococcus aureus. Finally, the FET-based one-step immunoassay was demonstrated for five types of food poisoning-related bacteria in human serum.

Synthesis of cubosomes containing cerium oxide nanoparticles from Lactobacillus acidophilus loaded with glatiramer acetate and carboxymethylcellulose coating

Cerium oxide nanoparticles (nano-series) are used as catalysts in industrial applications due to their free radical scavenging properties. Given that free radicals play an essential role in the pathology of many neurological diseases, we investigated the use of nanocrystals as a potential therapeutic agent for oxidative damage. This project synthesized nano-series from a new and environmentally friendly bio-pathway. Investigation of cerium nitrate in culture medium containing inoculated Lactobacillus acidophilus strain before incubation produces nano-series. Loaded with glatiramer acetate (GA) was formed by coating carboxymethylcellulose (CMC) and CeO₂. FE-SEM analysis showed nano-series in the 9-11 nm range, spherical shape, and uniform particle size distribution. Cubic nanoparticles containing anti-multiple sclerosis (anti-Ms) treatment called GA were used. Glycerol monostearate (GMS) was used as a fat base, and evening primrose extract was used as an anti-inflammatory in cubosomes. Design-Expert® software was used to study the effects of different formulation factors on the properties of GA-loaded cubic dispersions. Thirty GA-labeled cubic dispersions were prepared with GA-labeled carboxymethylcellulose and evaluated in vitro. The results showed an average nano-series size of 89.02 and a zeta potential of -49.9. Cubosomes containing GA-CMC/CeO₂ showed a stable release profile for 180 min. The results showed that cubosomes containing GA-CMC/CeO₂ could be a promising drug carrier with normal release behavior.