G-fibres in storage roots of Trifolium pratense (Fabaceae): tensile stress generators for contraction

Rhamnogalacturonan I with β-(1,4)-Galactan Side Chains as an Ever-Present Component of Tertiary Cell Wall of Plant Fibers

The cellulose-enriched tertiary cell walls present in many plant fibers have specific composition, architecture, machinery of formation, and function. To better understand the mechanisms underlying their mode of action and to reveal the peculiarities of fibers from different plant species, it is necessary to more deeply characterize the major components. Next to overwhelming cellulose, rhamnogalacturonan I (RG-I) is considered to be the key polymer of the tertiary cell wall; however, it has been isolated and biochemically characterized in very few plant species. Here, we add RG-I to the list from the phloem fibers of the Phaseolus vulgaris stem that was isolated and analyzed by nuclear magnetic resonance (NMR), dynamic light scattering, and immunolabeling, both within tissue and as an isolated polymer. Additionally, fibers with tertiary cell walls from nine species of dicotyledonous plants from the orders Malphigiales, Fabales, and Rosales were labeled with RG-I-related antibodies to check the presence of the polymer and compare the in situ presentation of its backbone and side chains. The obtained results confirm that RG-I is an obligatory polymer of the tertiary cell wall. However, there are differences in the structure of this polymer from various plant sources, and these peculiarities may be taxonomically related.

Force Generation in the Coiling Tendrils of Passiflora caerulea

Tendrils of climbing plants coil along their length, thus forming a striking helical spring and generating tensional forces. It is found that, for tendrils of the passion flower Passiflora caerulea, the generated force lies in the range of 6-140 mN, which is sufficient to lash the plant tightly to its substrate. Further, it is revealed that the generated force strongly correlates with the water status of the plant. Based on a combination of in situ force measurements with anatomical investigations and dehydration-rehydration experiments on both entire tendril segments and isolated lignified tissues, a two-phasic mechanism for spring formation is proposed. First, during the free coiling phase, the center of the tendril begins to lignify unilaterally. At this stage, both the generated tension and the stability of the form of the spring still depend on turgor pressure. The unilateral contraction of a bilayer as being the possible driving force for the tendril coiling motion is discussed. Second, in a stabilization phase, the entire center of the coiled tendril lignifies, stiffening the spring and securing its function irrespective of its hydration status.

Structural Characteristics of Reaction Tissue in Plants

To maintain or adjust posture under the challenges of gravity and increased self-weight, or the effects of light, snow, and slope, plants have the ability to develop a special type of tissue called reaction tissue. The formation of reaction tissue is a result of plant evolution and adaptation. The identification and study of plant reaction tissue are of great significance for understanding the systematics and evolution of plants, the processing and utilization of plant-based materials, and the exploration of new biomimetic materials and biological templates. Trees' reaction tissues have been studied for many years, and recently, many new findings regarding these tissues have been reported. However, reaction tissue requires further detailed exploration, particularly due to their complex and diverse nature. Moreover, the reaction tissues in gymnosperms, vines, herbs, etc., which display unique biomechanical behavior, have also garnered the attention of research. After summarizing the existing literature, this paper provides an outline of the reaction tissues in woody plants and non-woody plants, and lays emphasis on alternations in the cell wall structure of the xylem in softwood and hardwood. The purpose of this paper is to provide a reference for the further exploration and study of reaction tissues with great diversity.

Raman spectroscopy mapping of changes in the organization and relative quantities of cell wall polymers in bast fiber cell walls of flax plants exposed to gravitropic stress

Flax is an important fiber crop that is subject to lodging. In order to gain more information about the potential role of the bast fiber cell wall in the return to the vertical position, 6-week-old flax plants were subjected to a long-term (6 week) gravitropic stress by stem tilting in an experimental set-up that excluded autotropism. Stress induced significant morphometric changes (lumen surface, lumen diameter, and cell wall thickness and lumen surface/total fiber surface ratio) in pulling- and opposite-side fibers compared to control fibers. Changes in the relative amounts and spatial distribution of cell wall polymers in flax bast fibers were determined by Raman vibrational spectroscopy. Following spectra acquisition, datasets (control, pulling- and opposite sides) were analyzed by principal component analysis, PC score imaging, and Raman chemical cartography of significant chemical bonds. Our results show that gravitropic stress induces discrete but significant changes in the composition and/or spatial organization of cellulose, hemicelluloses and lignin within the cell walls of both pulling side and opposite side fibers.

A Guide to Elucidate the Hidden Multicomponent Layered Structure of Plant Cuticles by Raman Imaging

The cuticle covers almost all plant organs as the outermost layer and serves as a transpiration barrier, sunscreen, and first line of defense against pathogens. Waxes, fatty acids, and aromatic components build chemically and structurally diverse layers with different functionality. So far, electron microscopy has elucidated structure, while isolation, extraction, and analysis procedures have revealed chemistry. With this method paper, we close the missing link by demonstrating how Raman microscopy gives detailed information about chemistry and structure of the native cuticle on the microscale. We introduce an optimized experimental workflow, covering the whole process of sample preparation, Raman imaging experiment, data analysis, and interpretation and show the versatility of the approach on cuticles of a spruce needle, a tomato peel, and an Arabidopsis stem. We include laser polarization experiments to deduce the orientation of molecules and multivariate data analysis to separate cuticle layers and verify their molecular composition. Based on the three investigated cuticles, we discuss the chemical and structural diversity and validate our findings by comparing models based on our spectroscopic data with the current view of the cuticle. We amend the model by adding the distribution of cinnamic acids and flavonoids within the cuticle layers and their transition to the epidermal layer. Raman imaging proves as a non-destructive and fast approach to assess the chemical and structural variability in space and time. It might become a valuable tool to tackle knowledge gaps in plant cuticle research.

The thickening and modification of the galactan-enriched layer during primary phloem fibre development in Cannabis sativa

Primary phloem fibres (PPFs) have higher fibre quality and are economically more important for the textile sector than secondary phloem fibres. Both the chemical composition and mechanical structure of the secondary cell wall mainly influence the quality of bast fibres. We investigated the thickening of the galactan-enriched (Gn) layer and its modification process into a gelatinous (G)-layer, which is the largest portion of the secondary cell wall, during the development of the PPF in Cannabis sativa. Stem segments of hemp collected at 17, 29, 52 and 62 days after sowing were comparatively examined using light microscopy, scanning electron microscopy and transmission electron microscopy. The initial cells of PPF started the proliferation and differentiation at 17 days, but the secondary cell wall thickening had already commenced before the 29 days. Both the G- and Gn-layer were rapidly added onto the S-layer of PPFs; thus, the secondary cell wall thickness increased approximately 2-fold at 52 days (from the 29-day mark), and 8-fold at 62 days. The cortical microtubule arrays appeared adjacent to the plasma membrane of PPF cells related to the cellulose synthesis. Additionally, cross-sectioned microfibrils were observed on Gn-layer as the cluster of tiny spots. At 62 days, the specific stratification structure consisting of several lamellae occurred on the G-layer of the secondary cell wall. The secondary cell wall thickened remarkably at 52 days through 62 days so that the mature secondary cell wall consisted of three distinctive layers, the S-, G- and Gn-layer. Cortical microtubule arrays frequently appeared adjacent to the plasma membrane together with cellulose microfibrils on secondary cell wall. The G-layer of PPF at 62 days exhibited the characteristic stratification structure, which demonstrates the modification of the Gn-layer into the G-layer.

Wood and the Activity of Dead Tissue

Wood is a prototypical biological material, which adapts to mechanical requirements. The microarchitecture of cellulose fibrils determines the mechanical properties of woody materials, as well as their actuation properties, based on absorption and desorption of water. Herein it is argued that cellulose fiber orientation corresponds to an analog code that determines the response of wood to humidity as an active material. Examples for the harvesting of wood activity, as well as bioinspiration, are given.

Cell Wall Layer Induced in Xylem Fibers of Flax Upon Gravistimulation Is Similar to Constitutively Formed Cell Walls of Bast Fibers

In the fibers of many plant species after the formation of secondary cell walls, cellulose-enriched cell wall layers (often named G-layers or tertiary cell walls) are deposited which are important in many physiological situations. Flax (Linum usitatissimum L.) phloem fibers constitutively develop tertiary cell walls during normal plant growth. During the gravitropic response after plant inclination, the deposition of a cellulose-enriched cell wall layer is induced in xylem fibers on one side of the stem, providing a system similar to that of tension wood in angiosperm trees. Atomic force microscopy (AFM), immunochemistry, and transcriptomic analyses demonstrated that the G-layer induced in flax xylem fibers was similar to the constitutively formed tertiary cell wall of bast (phloem) fibers but different from the secondary cell wall. The tertiary cell walls, independent of tissue of origin and inducibility, were twice as stiff as the secondary cell walls. In the gravitropic response, the tertiary cell wall deposition rate in xylem was higher than that of the secondary cell wall. Rhamnogalacturonan I (RG-I) with galactan side chains was a prominent component in cellulose-rich layers of both phloem and xylem flax fibers. Transcriptomic events underlying G-layer deposition in phloem and xylem fibers had much in common. At the induction of tertiary cell wall deposition, several genes for rhamnosyltransferases of the GT106 family were activated in xylem samples. The same genes were expressed in the isolated phloem fibers depositing the tertiary cell wall. The comparison of transcriptomes in fibers with both inducible and constitutive tertiary cell wall deposition and xylem tissues that formed the secondary cell walls is an effective system that revealed important molecular players involved in the formation of cellulose-enriched cell walls.

Effect of Partial Excision of Early Taproots on Growth and Components of Hydroponic Carrots

Hydroponics provides a stable root environment that can be easily controlled. In this paper, we investigated the effect of partial excision of early taproots of hydroponic carrots on their growth and components. Carrot taproots were excised after 30 days from sowing at 5 cm, 10 cm, and 15 cm from the stem base (C5, C10, and C15) and compared with nonexcised control plants. Time-course measurements revealed the taproot lengths of C10 and C15 plants gradually decreased. After 28 days of treatment, C5 taproot tips showed the most rounded shape among root-excised plants. Control plants possessed long taproots that were not enlarged at the site more than 15 cm from the stem base. Taproot fresh weight was lower in C5 plants and higher in C15 plants compared with controls. Although taproot sugar concentrations did not differ between treatments, total phenol concentration was higher in C5 taproots. These data suggest that partial removal of early taproots can regulate the shape and ingredients of hydroponic carrots.

Label-free visualization of lignin deposition in loquats using complementary stimulated and spontaneous Raman microscopy

The lignification triggered by biotic or abiotic stresses hardens fruits and vegetables and eventually influences their consumer appeal. Extensive prior efforts have been made to unveil the underlying mechanism of flesh lignification, primarily focused on its physicochemical and molecular biological properties. Nevertheless, most of these studies used destroyed and homogenized bulk tissues as analytes; as a result, potentially valuable spatial information was lost. In this study, the deposition of lignin in loquat flesh during lignification was visualized from the tissue level to the single-cell level by combining the advantages of stimulated Raman scattering (SRS) and spontaneous Raman microscopy using label-free in situ molecular imaging. SRS has the advantages of being fast and providing large-area chemical imaging to reveal the spatial heterogeneity of lignin and cell wall polysaccharide distribution in loquat flesh. After 2 days of storage at 0 °C, increased lignins were observed by large-area SRS imaging. In addition, microscopic SRS images of the flesh cells indicated that the increased lignins were trapped in the cell corner (CC) and middle lamella (ML). Furthermore, the compositional and structural features of lignified cells (LCs), CC and ML of loquat flesh were investigated by spontaneous Raman microscopy, and the results showed that the LCs were a combination of lignin, cellulose, and hemicellulose, whereas CC and ML showed only deposited lignin and pectin without cross-linked cellulose and hemicellulose. This result further suggests that the lignins in the CC and ML regions of loquats were later synthesized alone during postharvest storage. This innovative combination of SRS and spontaneous Raman microscopy allows the label-free macroscale and fine chemical imaging of plant cell walls and will enhance our fundamental understanding of the structures and functions of the plant cell wall.

Raman Spectroscopy in Nonwoody Plants

Confocal Raman spectroscopy (RS) enables obtaining molecular information from the nondestructive analysis of plant material in situ. It can thereby be a useful method to investigate spatial distribution and heterogeneity of cell-wall polymers. The authors' intention is to present some examples of RS application and its capabilities for investigations of nonwoody plants. In this context, we present protocols for qualitative analysis of main polymers of plant wall and application of RS in a semiquantitative study of the arrangement of selected polymers in the wall in its native state.

Screenplay of flax phloem fiber behavior during gravitropic reaction

Flax phloem fibers act as constitutively formed "muscles" that support the vertical position of the high but narrow stem. The specific mechanical properties of flax fibers and of similar fibers in other plant species are provided by the development of tertiary cell wall with tensed cellulose microfibrils. The work of phloem fibers becomes especially pronounced during the restoration of stem vertical position if it was disturbed. Gravistimulation of flax plants induces considerable modification of phloem fibers at the pulling stem side - the lumen diameter increases, while the cell wall thickness goes down. Here we show that the action of phloem fibers as motors of stem vertical position restoration is coupled to the cell wall remodelling as well as the increase of osmolytes (mainly potassium and malate) content, and accumulation of the γ-amino-butyric acid that may be involved in signalling events. The molecular players that take part in these processes are suggested.

Plant 'muscles': fibers with a tertiary cell wall

Plants, although sessile organisms, are nonetheless able to move their body parts; for example, during root contraction of geophytes or in the gravitropic reaction by woody stems. One of the major mechanisms enabling these movements is the development of specialized structures that possess contractile properties. Quite unlike animal muscles, for which the action is driven by protein-protein interactions in the protoplasma, the action of plant 'muscles' is polysaccharide-based and located in the uniquely designed, highly cellulosic cell wall that is deposited specifically in fibers. This review describes the development of such cell walls as a widespread phenomenon in the plant kingdom, gives reasons why it should be considered as a tertiary cell wall, and discusses the mechanism of action of the 'muscles'. The origin of the contractile properties lies in the tension of the axially oriented cellulose microfibrils due to entrapment of rhamnogalacturonan-I aggregates that limits the lateral interaction of microfibrils. Long side chains of the nascent rhamnogalacturonan-I are trimmed off during cell wall maturation leading to tension development. Similarities in the tertiary cell wall design in fibers of different plant origin indicate that the basic principles of tension creation may be universal in various ecophysiological situations.

New insights into plant cell walls by vibrational microspectroscopy

Vibrational spectroscopy provides non-destructively the molecular fingerprint of plant cells in the native state. In combination with microscopy, the chemical composition can be followed in context with the microstructure, and due to the non-destructive application, in-situ studies of changes during, e.g., degradation or mechanical load are possible. The two complementary vibrational microspectroscopic approaches, Fourier-Transform Infrared (FT-IR) Microspectroscopy and Confocal Raman spectroscopy, are based on different physical principles and the resulting different drawbacks and advantages in plant applications are reviewed. Examples for FT-IR and Raman microscopy applications on plant cell walls, including imaging as well as in-situ studies, are shown to have high potential to get a deeper understanding of structure-function relationships as well as biological processes and technical treatments. Both probe numerous different molecular vibrations of all components at once and thus result in spectra with many overlapping bands, a challenge for assignment and interpretation. With the help of multivariate unmixing methods (e.g., vertex components analysis), the most pure components can be revealed and their distribution mapped, even tiny layers and structures (250 nm). Instrumental as well as data analysis progresses make both microspectroscopic methods more and more promising tools in plant cell wall research.

Gradient of structural traits drives hygroscopic movements of scarious bracts surrounding Helichrysum bracteatum capitulum

Background and Aims

The capitulum of Helichrysum bracteatum is surrounded by scarious involucral bracts that perform hygroscopic movements leading to bract bending toward or away from the capitulum, depending on cell wall water status. The present investigation aimed at explaining the mechanism of these movements.

Methods

Surface strain and bract shape changes accompanying the movements were quantified using the replica method. Dissection experiments were used to assess the contribution of different tissues in bract deformation. Cell wall structure and composition were examined with the aid of light and electron microscopy as well as confocal Raman spectroscopy.

Key Results

At the bract hinge (organ actuator) longitudinal strains at opposite surfaces differ profoundly. This results in changes of hinge curvature that drive passive displacement of distal bract portions. The distal portions in turn undergo nearly uniform strain on both surfaces and also minute shape changes. The hinge is built of sclerenchyma-like abaxial tissue, parenchyma and adaxial epidermis with thickened outer walls. Cell wall composition is rather uniform but tissue fraction occupied by cell walls, cell wall thickness, compactness and cellulose microfibril orientation change gradually from abaxial to adaxial hinge surface. Dissection experiments show that the presence of part of the hinge tissues is enough for movements.

Conclusions

Differential strain at the hinge is due to adaxial-abaxial gradient in structural traits of hinge tissues and cell walls. Thus, the bract hinge of H. bracteatum is a structure comprising gradually changing tissues, from highly resisting to highly active, rather than a bi-layered structure with distinct active and resistance parts, often ascribed for hygroscopically moving organs.

Development of gravitropic response: unusual behavior of flax phloem G-fibers

The major mechanism of gravitropism that is discussed for herbal plants is based on the nonuniform elongation of cells located on the opposite stem sides, occurring in the growing zone of an organ. However, gravitropic response of flax (Linum usitatissimum L.) is well-pronounced in the lower half of developing stem, which has ceased elongation long in advance of plant inclination. We have analyzed the stem curvature region by various approaches of microscopy and found the undescribed earlier significant modifications in primary phloem fibers that have constitutively developed G-layer. In fibers on the pulling stem side, cell portions were widened with formation of "bottlenecks" between them, leading to the "sausage-like" shape of a cell. Lumen diameter in fiber widening increased, while cell wall thickness decreased. Callose was deposited in proximity to bottlenecks and sometimes totally occluded their lumen. Structure of fiber cell wall changed considerably, with formation of breaks between G- and S-layers. Thick fibrillar structures that were revealed in fiber cell wall by light microscopy got oblique orientation instead of parallel to the fiber axis one in control plants. The described changes occurred at various combinations of gravitational and mechanical stimuli. Thus, phloem fibers with constitutively formed gelatinous cell wall, located in nonelongating parts of herbal plant, are involved in gravitropism and may become an important element in general understanding of the gravity effects on plants. We suggest flax phloem fibers as the model system to study the mechanism of plant position correction, including signal perception and transduction.

Critical review on the mechanisms of maturation stress generation in trees

Trees control their posture by generating asymmetric mechanical stress around the periphery of the trunk or branches. This stress is produced in wood during the maturation of the cell wall. When the need for reaction is high, it is accompanied by strong changes in cell organization and composition called reaction wood, namely compression wood in gymnosperms and tension wood in angiosperms. The process by which stress is generated in the cell wall during its formation is not yet known, and various hypothetical mechanisms have been proposed in the literature. Here we aim at discriminating between these models. First, we summarize current knowledge about reaction wood structure, state and behaviour relevant to the understanding of maturation stress generation. Then, the mechanisms proposed in the literature are listed and discussed in order to identify which can be rejected based on their inconsistency with current knowledge at the frontier between plant science and mechanical engineering.

Biomechanics and functional morphology of a climbing monocot

Plants with a climbing growth habit possess unique biomechanical properties arising from adaptations to changing loading conditions connected with close attachment to mechanical supports. In monocot climbers, mechanical adaptation is restricted by the absence of a bifacial vascular cambium. Flagellaria indica was used to investigate the mechanical properties and adaptations of a monocot climber that, uniquely, attaches to the surrounding vegetation via leaf tendrils. Biomechanical methods such as three-point bending and torsion tests were used together with anatomical studies on tissue development, modification and distribution. In general, the torsional modulus was lower than the bending modulus; hence, torsional stiffness was less than flexural stiffness. Basal parts of mature stems showed the greatest stiffness while that of more apical stem segments levelled off. Mechanical properties were modulated via tissue maturation processes mainly affecting the peripheral region of the stem. Peripheral vascular bundles showed a reduction in the amount of conducting tissue while the proportion and density of the bundle sheath increased. Furthermore, adjacent bundle sheaths merged resulting in a dense ring of fibrous tissue. Although F. indica lacks secondary cambial growth, the climbing habit is facilitated by a complex interaction of tissue maturation and attachment.

Solution Properties of Hemicellulose Polysaccharides with Four Common Carbohydrate Force Fields

Hemicellulose polysaccharides play an important role in the swelling behavior of the primary plant cell wall, and molecular dynamics simulations provide the means of gaining a concise understanding of the interactions of hemicellulose polysaccharides with water. Here, we compare four of the main polysaccharide force fields (CHARMM36 TIP3P, GROMOS56A6(CARBO) SPC, GLYCAM06h TIP3P, and GLYCAM06h TIP5P) for the most abundant hemicellulose backbone components. In particular, we compare aggregation, diffusion coefficients, system density, and investigate the free energy of hydration of saccharides in water. We find that the saccharides show nonphysical aggregation at low concentrations with the GLYCAM06h TIP3P force field, which can be rectified by the use of the TIP5P water model. As a result of the aggregation, GLYCAM06h TIP3P does not lead to reasonable diffusion coefficients whereas the diffusion coefficients, as well as the system density, agrees best with experimental data for the GLYCAM06h TIP5P force field. Overall, GLYCAM06h TIP5P gives good agreement with experimental free energy of hydration data for small saccharides. In addition, the free energy of hydration for short polysaccharides calculated with the GLYCAM06h TIP5P force field is consistent with the radial distribution functions between the polysaccharides and water, the hydration number of the polysaccharides, and the hydrogen bonds formed in the system.

Pressurized honeycombs as soft-actuators: a theoretical study

The seed capsule of Delosperma nakurense is a remarkable example of a natural hygromorph, which unfolds its protecting valves upon wetting to expose its seeds. The beautiful mechanism responsible for this motion is generated by a specialized organ based on an anisotropic cellular tissue filled with a highly swelling material. Inspired by this system, we study the mechanics of a diamond honeycomb internally pressurized by a fluid phase. Numerical homogenization by means of iterative finite-element (FE) simulations is adapted to the case of cellular materials filled with a variable pressure fluid phase. Like its biological counterpart, it is shown that the material architecture controls and guides the otherwise unspecific isotropic expansion of the fluid. Deformations up to twice the original dimensions can be achieved by simply setting the value of input pressure. In turn, these deformations cause a marked change of the honeycomb geometry and hence promote a stiffening of the material along the weak direction. To understand the mechanism further, we also developed a micromechanical model based on the Born model for crystal elasticity to find an explicit relation between honeycomb geometry, swelling eigenstrains and elastic properties. The micromechanical model is in good qualitative agreement with the FE simulations. Moreover, we also provide the force-stroke characteristics of a soft actuator based on the pressurized anisotropic honeycomb and show how the internal pressure has a nonlinear effect which can result in negative values of the in-plane Poisson's ratio. As nature shows in the case of the D. nakurense seed capsule, cellular materials can be used not only as low-weight structural materials, but also as simple but convenient actuating materials.

Distribution of tension wood like gelatinous fibres in the roots of Acacia nilotica (Lam.) Willd

The present study unravels the anatomical characteristics and distribution patterns of cell wall polymers in the G-fibres found in the roots of A. nilotica using different microscopy techniques (light, electron and immunofluorescence microscopy). The present study was aimed to investigate the anatomy of reaction xylem in the positively gravitropic roots of Acacia nilotica growing in compact and waterlogged soils. The roots collected from the two different sites showed occurrence of gelatinous fibres throughout xylem radii from a distance of 4 cm from the soil surface. The thickness of gelatinous layer (G-layer) increased in the root collected from the deeper soil. Further, the ultrastructural studies revealed a complete replacement of S2 and S3 layers in G-fibres nearer to root tip region as compared to the root portion close to upper part of the soil surface. In addition, these fibres demonstrated intense lignification in compound middle lamellae region of G-fibre walls. Moreover, the vessel density and their width increased considerably near the root tip region. The immunofluorescence analysis suggested that the β-1,4-galactans were prevalent in G-layer, whereas the xylan was restricted to only regions of lignified secondary wall. The similarities in distribution pattern and anatomical features of G-fibres in waterlogged and non-waterlogged roots suggest the occurrence of G-fibres as inherent characteristics in the roots of Acacia nilotica.

Hydro-actuation of ice plant seed capsules powered by water uptake

Unlike well-known plant hydro-actuation systems that respond to changes in relative humidity (RH) (e.g. wheat awns), ice plant seed capsules undergo a reversible origami-like unfolding and release their seeds only in response to exposure to liquid water. The engine for ice plant actuation was found to be the water uptake and swelling of a highly swellable cellulosic inner layer (CIL) inside the cell lumen of a hygroscopic tissue responsible for the unfolding movement. CIL was found to have an open structure with porous lamellae filling the gap between denser cellulosic mats. Thermogravimetric analysis of water–CIL interaction showed that the initial enthalpy-driven adsorption of water can only account for increasing the moisture content up to about 0·4 mg/mg, which is not sufficient to initiate the actuation. By applying a combined chemo-mechanical model, we could show that the entropic gain of the system through further water uptake (40–350 wt%) is sufficient to accomplish a full opening of the seed capsules through a sophisticated design at various hierarchical levels of the system. The principles behind this actuation mechanism may inspire the development of hydro-responsive devices that, although being highly hydrophilic, only respond to liquid water and not to changes in RH.

Gelatinous fibers and variant secondary growth related to stem undulation and contraction in a monkey ladder vine, Bauhinia glabra (Fabaceae)

PREMISE OF THE STUDY

Some of the most striking stem shapes occur in species of Bauhinia (Fabaceae) known as monkey ladder vines. Their mature stems are flattened and develop regular undulations. Although stems have variant (anomalous) secondary growth, the mechanism causing the undulations is unknown.

METHODS

We measured stem segments over time (20 mo), described stem development using light microscopy, and correlated the changes in stem shape with anatomy.

KEY RESULTS

Growing stems are initially straight and bear tendrils on short axillary branches. The inner secondary xylem has narrow vessels and lignified fibers. As stems age, they become flattened and increasingly undulated with the production of two lobes of outer secondary xylem (OX) with wide vessels and only gelatinous fibers (G-fibers). Similar G-fibers are present in the secondary phloem and the cortical sclerified layer. In transverse sections, the concave side of each undulation has a greater area and quantity of G-fibers than the opposite convex side. Some older stems are not undulated and have less lobing of OX. Undulation causes a shortening of the stem segments: up to 28% of the original length.

CONCLUSIONS

Uneven distribution of G-fibers produces tensions that are involved in the protracted development of undulations. While young extending shoots attach by lateral branch tendrils, older stems may maintain their position in the canopy using undulations and persistent branch bases as gripping devices. Flattened and undulated stems with G-fibers produce flexible woody stems.

Imaging of plant cell walls by confocal Raman microscopy

Raman imaging of plant cell walls represents a nondestructive technique that can provide insights into chemical composition in context with structure at the micrometer level (<0.5 μm). The major steps of the experimental procedure are described: sample preparation (embedding and microcutting), setting the mapping parameters, and finally the calculation of chemical images on the basis of the acquired Raman spectra. Every Raman image is based on thousands of spectra, each being a spatially resolved molecular 'fingerprint' of the cell wall. Multiple components are analyzed within the native cell walls, and insights into polymer composition as well as the orientation of the cellulose microfibrils can be gained. The most labor-intensive step of this process is often the sample preparation, as the imaging approach requires a flat surface of the plant tissue with intact cell walls. After finishing the map (acquisition time is ∼10 min to 10 h, depending on the size of the region of interest and scanning parameters), many possibilities exist for the analysis of spectral data and image generation.

Structure, attachment properties, and ecological importance of the attachment system of English ivy (Hedera helix)

Root climbers such as English ivy (Hedera helix) rely on specialized adventitious roots for attachment, enabling the plants to climb on a wide range of natural and artificial substrates. Despite their importance for the climbing habit, the biomechanical properties of these specialized adventitious roots compared with standard roots and their performance in the attachment to different host species or inert substrates have not been studied. Here organs and tissues involved in the attachment are characterized and their significance in regard to a broader functional and ecological aspect is discussed. Depending on the substrate, the root clusters show different types of failure modes at various frequencies, demonstrating the close interaction between the climber and its substrates. With a Young's Modulus of 109.2 MPa, the attachment roots are relatively stiff for non-woody roots. The central cylinders of the attachment roots show a high tensile strength of 38 MPa and a very high extensibility of 34%. In host trees naturally co-distributed with English ivy, a 'balanced' occurrence of failure of the attachment system of the climber and the bark of the host is found, suggesting a co-evolution of climber and host. Maximum loads of root clusters normalized by the number of roots match those of individually tested attachment roots. In comparison with most subterranean roots the properties and structure of the attachment roots of English ivy show distinct differences. There exist similarities to the properties found for roots of Galium aparine, suggesting a trend in not fully self-supporting plants towards a higher extensibility.

Tensional stress generation in gelatinous fibres: a review and possible mechanism based on cell-wall structure and composition

Gelatinous fibres are specialized fibres, distinguished by the presence of an inner, gelatinous cell-wall layer. In recent years, they have attracted increasing interest since their walls have a desirable chemical composition (low lignin, low pentosan, and high cellulose contents) for applications such as saccharification and biofuel production, and they have interesting mechanical properties, being capable of generating high tensional stress. However, the unique character of gelatinous layer has not yet been widely recognized. The first part of this review presents a model of gelatinous-fibre organization and stresses the unique character of the gelatinous layer as a separate type of cell-wall layer, different from either primary or secondary wall layers. The second part discusses major current models of tensional stress generation by these fibres and presents a novel unifying model based on recent advances in knowledge of gelatinous wall structure. Understanding this mechanism could potentially lead to novel biomimetic developments in material sciences.

Lignin variability in plant cell walls: contribution of new models

Lignin is a major component of certain plant cell walls. The enzymes and corresponding genes associated with the metabolic pathway leading to the production of this complex phenolic polymer have been studied for many years now and are relatively well characterized. The use of genetically modified model plants (Arabidopsis, tobacco, poplar.) and mutants has contributed greatly to our current understanding of this process. The recent utilisation and/or development of a number of dedicated genomic and transcriptomic tools for other species opens new perspectives for advancing our knowledge of the biological role of this important polymer in less typical situations and/or species. In this context, studies on the formation of hypolignified G-type fibres in angiosperm tension wood, and the natural hypolignification of secondary cell walls in plant bast fibre species such as hemp (Cannabis sativa), flax (Linum usitatissimum) or ramie (Boehmeria nivea) are starting to provide novel information about how plants control secondary cell wall formation. Finally, other biologically interesting species for which few molecular resources currently exist could also represent interesting future models.

Development of cellulosic secondary walls in flax fibers requires beta-galactosidase

Bast (phloem) fibers, tension wood fibers, and other cells with gelatinous-type secondary walls are rich in crystalline cellulose. In developing bast fibers of flax (Linum usitatissimum), a galactan-enriched matrix (Gn-layer) is gradually modified into a mature cellulosic gelatinous-layer (G-layer), which ultimately comprises most of the secondary cell wall. Previous studies have correlated this maturation process with expression of a putative β-galactosidase. Here, we demonstrate that β-galactosidase activity is in fact necessary for the dynamic remodeling of polysaccharides that occurs during normal secondary wall development in flax fibers. We found that developing stems of transgenic (LuBGAL-RNAi) flax with reduced β-galactosidase activity had lower concentrations of free Gal and had significant reductions in the thickness of mature cellulosic G-layers compared with controls. Conversely, Gn-layers, labeled intensively by the galactan-specific LM5 antibody, were greatly expanded in LuBGAL-RNAi transgenic plants. Gross morphology and stem anatomy, including the thickness of bast fiber walls, were otherwise unaffected by silencing of β-galactosidase transcripts. These results demonstrate a specific requirement for β-galactosidase in hydrolysis of galactans during formation of cellulosic G-layers. Transgenic lines with reduced β-galactosidase activity also had biochemical and spectroscopic properties consistent with a reduction in cellulose crystallinity. We further demonstrated that the tensile strength of normal flax stems is dependent on β-galactosidase-mediated development of the phloem fiber G-layer. Thus, the mechanical strength that typifies flax stems is dependent on a thick, cellulosic G-layer, which itself depends on β-galactosidase activity within the precursor Gn-layer. These observations demonstrate a novel role for matrix polysaccharides in cellulose deposition; the relevance of these observations to the development of cell walls in other species is also discussed.

Mechanics without muscle: biomechanical inspiration from the plant world

Plant and animal biomechanists have much in common. Although their frame of reference differs, they think about the natural world in similar ways. While researchers studying animals might explore airflow around flapping wings, the actuation of muscles in arms and legs, or the material properties of spider silk, researchers studying plants might explore the flow of water around fluttering seaweeds, the grasping ability of climbing vines, or the material properties of wood. Here we summarize recent studies of plant biomechanics highlighting several current research themes in the field: expulsion of high-speed reproductive projectiles, generation of slow movements by shrinking and swelling cell walls, effects of ontogenetic shifts in mechanical properties of stems, flexible reconfiguration and material properties of seaweeds under crashing waves, and the development of botanically-inspired commercial products. Our hope is that this synopsis will resonate with both plant and animal biologists, encourage cross-pollination across disciplines, and promote fruitful interdisciplinary collaborations in the future.