Reconstitution of the Fo complex of Escherichia coli ATP synthase from isolated subunits. Varying the number of essential carboxylates by co-incorporation of wild-type and mutant subunit c after purification in organic solvent

Cooperation among c-subunits of FoF1-ATP synthase in rotation-coupled proton translocation

In F_oF₁-ATP synthase, proton translocation through F_o drives rotation of the c-subunit oligomeric ring relative to the a-subunit. Recent studies suggest that in each step of the rotation, key glutamic acid residues in different c-subunits contribute to proton release to and proton uptake from the a-subunit. However, no studies have demonstrated cooperativity among c-subunits toward F_oF₁-ATP synthase activity. Here, we addressed this using Bacillus PS3 ATP synthase harboring a c-ring with various combinations of wild-type and cE56D, enabled by genetically fused single-chain c-ring. ATP synthesis and proton pump activities were decreased by a single cE56D mutation and further decreased by double cE56D mutations. Moreover, activity further decreased as the two mutation sites were separated, indicating cooperation among c-subunits. Similar results were obtained for proton transfer-coupled molecular simulations. The simulations revealed that prolonged proton uptake in mutated c-subunits is shared between two c-subunits, explaining the cooperation observed in biochemical assays.

Cells need to be able to store and transfer energy to fuel their various activities. To do this, they produce a small molecule called ATP to carry the energy, which is then released when the ATP is broken down. An enzyme found in plants, animals and bacteria, called F_oF₁ ATP synthase, can both create and use ATP. When it does this, protons, or positive hydrogen ions, are transported across cellular boundaries called membranes.

The region of the enzyme that is responsible for pumping the protons contains different parts known as the c-ring and the a-subunit. The movement of protons drives the c-ring to rotate relative to the a-subunit, which leads to producing ATP. Previous research using simulations and the protein structures found there are two or three neighbouring amino acids in the c-ring that face the a-subunit, suggesting that these amino acids act together to drive the rotation.

To test this hypothesis, Mitome et al. mutated these amino acids to examine the effect on the enzyme’s ability to produce ATP. A single mutation reduced the production of ATP, which decreased even further with mutations in two of the amino acids. The extent of this decrease depended on the distance between the two mutations in the c-ring. Simulations of these changes also found similar results. This indicates there is coordination between different parts of the c-ring to increase the rate of ATP production.

This study offers new insights into the molecular processes controlling ATP synthesis and confirms previous theoretical research. This will interest specialists in bioenergetics because it addresses a fundamental biological question with broad impact.

Molecular dynamics simulation of proton-transfer coupled rotations in ATP synthase FO motor

The F_O motor in F_OF₁ ATP synthase rotates its rotor driven by the proton motive force. While earlier studies elucidated basic mechanisms therein, recent advances in high-resolution cryo-electron microscopy enabled to investigate proton-transfer coupled F_O rotary dynamics at structural details. Here, taking a hybrid Monte Carlo/molecular dynamics simulation method, we studied reversible dynamics of a yeast mitochondrial F_O. We obtained the 36°-stepwise rotations of F_O per one proton transfer in the ATP synthesis mode and the proton pumping in the ATP hydrolysis mode. In both modes, the most prominent path alternatively sampled states with two and three deprotonated glutamates in c-ring, by which the c-ring rotates one step. The free energy transduction efficiency in the model F_O motor reached ~ 90% in optimal conditions. Moreover, mutations in key glutamate and a highly conserved arginine increased proton leakage and markedly decreased the coupling, in harmony with previous experiments. This study provides a simple framework of simulations for chemical-reaction coupled molecular dynamics calling for further studies in ATP synthase and others.

Engineered Protein Model of the ATP synthase H+- Channel Shows No Salt Bridge at the Rotor-Stator Interface

ATP synthase is powered by the flow of protons through the molecular turbine composed of two α-helical integral membrane proteins, subunit a, which makes a stator, and a cylindrical rotor assembly made of multiple copies of subunit c. Transient protonation of a universally conserved carboxylate on subunit c (D61 in E. coli) gated by the electrostatic interaction with arginine on subunit a (R210 in E. coli) is believed to be a crucial step in proton transfer across the membrane. We used a fusion protein consisting of subunit a and the adjacent helices of subunit c to test by NMR spectroscopy if cD61 and aR210 are involved in an electrostatic interaction with each other, and found no evidence of such interaction. We have also determined that R140 does not form a salt bridge with either D44 or D124 as was suggested previously by mutation analysis. Our results demonstrate the potential of using arginines as NMR reporter groups for structural and functional studies of challenging membrane proteins.

Purification, characterization and reconstitution into membranes of the oligomeric c-subunit ring of thermophilic F(o)F(1)-ATP synthase expressed in Escherichia coli

F(o)F(1)-ATP synthase catalyzes ATP synthesis coupled with proton-translocation across the membrane. The membrane-embedded F(o) portion is responsible for the H(+) translocation coupled with rotation of the oligomeric c-subunit ring, which induces rotation of the γ subunit of F(1). For solid-state NMR measurements, F(o)F(1) of thermophilic Bacillus PS3 (TF(o)F(1)) was overexpressed in Escherichia coli and the intact c-subunit ring (TF(o)c-ring) was isolated by new procedures. One of the key improvement in this purification was the introduction of a His residue to each c-subunit that acts as a virtual His(10)-tag of the c-ring. After solubilization from membranes by sodium deoxycholate, the c-ring was purified by Ni-NTA affinity chromatography, followed by anion-exchange chromatography. The intactness of the isolated c-ring was confirmed by high-resolution clear native PAGE, sedimentation analysis, and H(+)-translocation activity. The isotope-labeled intact TF(o)c-ring was successfully purified in such an amount as enough for solid-state NMR measurements. The isolated TF(o)c-rings were reconstituted into lipid membranes. A solid-state NMR spectrum at a high quality was obtained with this membrane sample, revealing that this purification procedure was suitable for the investigation by solid-state NMR. The purification method developed here can also be used for other physicochemical investigations.

Cell-free synthesis of membrane subunits of ATP synthase in phospholipid bicelles: NMR shows subunit a fold similar to the protein in the cell membrane

NMR structure determination of large membrane proteins is hampered by broad spectral lines, overlap, and ambiguity of signal assignment. Chemical shift and NOE assignment can be facilitated by amino acid selective isotope labeling in cell-free protein synthesis system. However, many biological detergents are incompatible with the cell-free synthesis, and membrane proteins often have to be synthesized in an insoluble form. We report cell-free synthesis of subunits a and c of the proton channel of Escherichia coli ATP synthase in a soluble form in a mixture of phosphatidylcholine derivatives. In comparison, subunit a was purified from the cell-free system and from the bacterial cell membranes. NMR spectra of both preparations were similar, indicating that our procedure for cell-free synthesis produces protein structurally similar to that prepared from the cell membranes.

Recombinant production and purification of the subunit c of chloroplast ATP synthase

In chloroplasts, the multimeric ATP synthase produces the adenosine triphosphate (ATP) that is required for photosynthetic metabolism. The synthesis of ATP is mechanically coupled to the rotation of a ring of c-subunits, which is imbedded in the thylakoid membrane. The rotation of this c-subunit ring is driven by the translocation of protons across this membrane, along an electrochemical gradient. The ratio of protons translocated to ATP synthesized varies according to the number of c-subunits (n) per oligomeric ring (c(n)) in the enzyme, which is organism dependent. Although this ratio is inherently related to the metabolism of the organism, the exact cause of the c(n) variability is not well understood. In order to investigate the factors that may contribute to this stoichiometric variation, we have developed a recombinant bacterial expression and column purification system for the c₁ monomeric subunit. Using a plasmid with a codon optimized gene insert, the hydrophobic c₁ subunit is first expressed as a soluble MBP-c₁ fusion protein, then cleaved from the maltose binding protein (MBP) and purified on a reversed phase column. This novel approach enables the soluble expression of an eukaryotic membrane protein in BL21 derivative Escherichia coli cells. We have obtained significant quantities of highly purified c₁ subunit using these methods, and we have confirmed that the purified c₁ has the correct alpha-helical secondary structure. This work will enable further investigation into the undefined factors that affect the c-ring stoichiometry and structure. The c-subunit chosen for this work is that of spinach (Spinacia oleracea) chloroplast ATP synthase.

Structure analysis of membrane-reconstituted subunit c-ring of E. coli H+-ATP synthase by solid-state NMR

The subunit c-ring of H(+)-ATP synthase (F(o) c-ring) plays an essential role in the proton translocation across a membrane driven by the electrochemical potential. To understand its structure and function, we have carried out solid-state NMR analysis under magic-angle sample spinning. The uniformly [(13)C, (15)N]-labeled F(o) c from E. coli (EF(o) c) was reconstituted into lipid membranes as oligomers. Its high resolution two- and three-dimensional spectra were obtained, and the (13)C and (15)N signals were assigned. The obtained chemical shifts suggested that EF(o) c takes on a hairpin-type helix-loop-helix structure in membranes as in an organic solution. The results on the magnetization transfer between the EF(o) c and deuterated lipids indicated that Ile55, Ala62, Gly69 and F76 were lined up on the outer surface of the oligomer. This is in good agreement with the cross-linking results previously reported by Fillingame and his colleagues. This agreement reveals that the reconstituted EF(o) c oligomer takes on a ring structure similar to the intact one in vivo. On the other hand, analysis of the (13)C nuclei distance of [3-(13)C]Ala24 and [4-(13)C]Asp61 in the F(o) c-ring did not agree with the model structures proposed for the EF(o) c-decamer and dodecamer. Interestingly, the carboxyl group of the essential Asp61 in the membrane-embedded EF(o) c-ring turned out to be protonated as COOH even at neutral pH. The hydrophobic surface of the EF(o) c-ring carries relatively short side chains in its central region, which may allow soft and smooth interactions with the hydrocarbon chains of lipids in the liquid-crystalline state.

Biogenesis of membrane bound respiratory complexes in Escherichia coli

Escherichia coli is one of the preferred bacteria for studies on the energetics and regulation of respiration. Respiratory chains consist of primary dehydrogenases and terminal reductases or oxidases linked by quinones. In order to assemble this complex arrangement of protein complexes, synthesis of the subunits occurs in the cytoplasm followed by assembly in the cytoplasm and/or membrane, the incorporation of metal or organic cofactors and the anchoring of the complex to the membrane. In the case of exported metalloproteins, synthesis, assembly and incorporation of metal cofactors must be completed before translocation across the cytoplasmic membrane. Coordination data on these processes is, however, scarce. In this review, we discuss the various processes that respiratory proteins must undergo for correct assembly and functional coupling to the electron transport chain in E. coli. Targeting to and translocation across the membrane together with cofactor synthesis and insertion are discussed in a general manner followed by a review of the coordinated biogenesis of individual respiratory enzyme complexes. Lastly, we address the supramolecular organization of respiratory enzymes into supercomplexes and their localization to specialized domains in the membrane.

Application of rigid body mechanics to theoretical description of rotation within F0F1-ATP synthase

ATP synthase catalyses the formation of ATP from ADP and P(i) and is powered by the diffusion of protons throughout membranes down the proton electrochemical gradient. The protein consists of a water-soluble F(1) and a transmembrane F(0) proton transporter part. It was previously shown that the ring of membrane subunits rotates past a fixed subunit during catalytic cycle of the enzyme. However, many parameters of this movement are still unknown. In the present study the mutual protein movement in the membrane part of F(0)F(1)-ATP syntase has been analysed within the framework of rigid body mechanics. On the base of available experimental data it was shown that electrostatic interaction of two charged amino acids residues is able to supply quite enough energy for the rotation. The initial torque, which caused the rotation, was estimated as 3.7 pN nm and for this pattern the angular movement of c subunits complex could not physically have a period less than 10(-9)s. If membrane viscosity and elastic resistance were taken into account then the time of a whole turnover could rise up to 6.3 x 10(-3)s. It is remarkable that rotation will take place only under condition when the elasticity (Young's) module of the central stalk (gamma subunit and other minor subunits) is less than 5.0 x 10(7)N/m(2). Thus, for generally accepted structural parameters of ATP synthase, two-charge electrostatic interaction model does not permit rotation of the rotor if elastic properties of the central stalk are tougher than mentioned above. In order to explain the rotation under that condition one should either suppose a shorter distance between subunit a and c subunits complex or assume interaction of more than two charged amino acids residues.

The transmembrane domain of subunit b of the Escherichia coli F1F(O) ATP synthase is sufficient for H(+)-translocating activity together with subunits a and c

Subunit b is indispensable for the formation of a functional H(+)-translocating F(O) complex both in vivo and in vitro. Whereas the very C-terminus of subunit b interacts with F(1) and plays a crucial role in enzyme assembly, the C-terminal region is also considered to be necessary for proper reconstitution of F(O) into liposomes. Here, we show that a synthetic peptide, residues 1-34 of subunit b (b(1-34)) [Dmitriev, O., Jones, P.C., Jiang, W. & Fillingame, R.H. (1999) J. Biol. Chem.274, 15598-15604], corresponding to the membrane domain of subunit b was sufficient in forming an active F(O) complex when coreconstituted with purified ac subcomplex. H(+) translocation was shown to be sensitive to the specific inhibitor N,N'-dicyclohexylcarbodiimide, and the resulting F(O) complexes were deficient in binding of isolated F(1). This demonstrates that only the membrane part of subunit b is sufficient, as well as necessary, for H(+) translocation across the membrane, whereas the binding of F(1) to F(O) is mainly triggered by C-terminal residues beyond Glu34 in subunit b. Comparison of the data with former reconstitution experiments additionally indicated that parts of the hydrophilic portion of the subunit b dimer are not involved in the process of ion translocation itself, but might organize subunits a and c in F(O) assembly. Furthermore, the data obtained functionally support the monomeric NMR structure of the synthetic b(1-34).

Thermophilic ATP synthase has a decamer c-ring: indication of noninteger 10:3 H+/ATP ratio and permissive elastic coupling

In a rotary motor F(o)F(1)-ATP synthase that couples H(+) transport with ATP synthesis/hydrolysis, it is thought that an F(o)c subunit oligomer ring (c-ring) in the membrane rotates as protons pass through F(o) and a 120 degrees rotation produces one ATP at F(1). Despite several structural studies, the copy number of F(o)c subunits in the c-ring has not been determined for any functional F(o)F(1). Here, we have generated and isolated thermophilic Bacillus F(o)F(1), each containing genetically fused 2-mer-14-mer c (c(2)-c(14)). Among them, F(o)F(1) containing c(2), c(5), or c(10) showed ATP-synthesis and other activities. When F(1) was removed, F(o) containing c(10) worked as an H(+) channel but F(o)s containing c(9), c(11) or c(12) did not. Thus, the c-ring of functional F(o)F(1) of this organism is a decamer. The inevitable consequence of this finding is noninteger ratios of rotation step sizes of F(1)/F(o) (120 degrees /36 degrees ) and of H(+)/ATP (10:3). This step-mismatch necessitates elastic twisting of the rotor shaft (and/or the side stalk) during rotation and permissive coupling between unit rotations by H(+) transport at F(o) and elementary events in catalysis at F(1).

Subunit A of the E. coli ATP synthase: reconstitution and high resolution NMR with protein purified in a mixed polarity solvent

Subunit a of the Escherichia coli ATP synthase, a 30 kDa integral membrane protein, was purified to homogeneity by a novel procedure incorporating selective extraction into a monophasic mixture of chloroform, methanol and water, followed by Ni-NTA chromatography in the mixed solvent. Pure subunit a was reconstituted with subunits b and c and phospholipids to form a functional proton-translocating unit. Nuclear magnetic resonance (NMR) spectra of the pure subunit a in the mixed solvent show good chemical shift dispersion and demonstrate the potential of the solvent mixture for NMR studies of the large membrane proteins that are currently intractable in aqueous detergent solutions.

Direct interaction of subunits a and b of the F0 complex of Escherichia coli ATP synthase by forming an ab2 subcomplex

The addition of a His6 tag to the N terminus of subunit a of the F0 complex of the Escherichia coli ATP synthase allowed the purification of an ab2 subcomplex after solubilization of membranes with n-dodecyl-beta-d-maltoside and subsequent nickel-nitrilotriacetic acid affinity chromatography. After co-reconstitution of the ab2 subcomplex with purified subunit c, passive proton translocation rates as well as coupled ATPase activities after binding of F1 were measured that were comparable with those of wild type F0. The interaction between subunits a and b, which has been shown to be stoichiometric and functional, is not triggered by any cross-linking reagent and therefore reflects subunit interactions occurring within the F0 complex in vivo.

Reconstitution of Fo of the sodium ion translocating ATP synthase of Propionigenium modestum from its heterologously expressed and purified subunits

The atpB and atpF genes of Propionigenium modestum were cloned as His-tag fusion constructs and expressed in Escherichia coli. Both recombinant subunits a and b were purified via Ni(2+) chelate affinity chromatography. A functionally active Fo complex was reassembled in vitro from subunits a, b and c, and incorporated into liposomes. The F(o) liposomes catalysed (22)Na(+) uptake in response to an inside negative potassium diffusion potential, and the uptake was prevented by modification of the c subunits with N,N'-dicyclohexylcarbodiimide (DCCD). In the absence of a membrane potential the Fo complexes catalysed (22)Na(+)(out)/Na(+)(in)-exchange. After F(1) addition the F(1)F(o) complex was formed and the holoenzyme catalysed ATP synthesis, ATP dependent Na(+) pumping, and ATP hydrolysis, which was inhibited by DCCD. Functional F(o) hybrids were reconstituted with recombinant subunits a and b from P. modestum and c(11) from Ilyobacter tartaricus. These Fo hybrids had Na(+) translocation activities that were not distinguishable from that of P. modestum F(o).

The light-induced reactions of tryptophan with halocompounds

The light-dependent reaction between N-acetyl-L-tryptophanamide (NATA) and chloroform has been examined using fluorescence, NMR and reverse phase chromatography. The emission of NATA in the presence of CHCl3 decreases at 360 nm and increases at longer wavelengths (approximately 480 nm) upon illumination with 280 nm light. The action spectrum for the formation of the 480 nm emitting product(s) has the same shape as the excitation spectra of the indole fluorophore in NATA. The pH of the solution decreases as the reaction proceeds. The reaction rate depends on the intensity of the illumination and is of the first order with respect to both [NATA] and [CHCl3]. NMR and reverse phase chromatography results demonstrate that multiple products are formed. The reaction products give new peaks between 8.9 and 10.5 ppm in the 1H-NMR that are assigned to -CHO groups, which are added to the indole ring. Some of the products react with 2,4-dinitrophenylhydrazine and thus confirm this assignment. A scheme is proposed in which the excited indole gives off a solvated electron to initiate a series of steps that yield indole derivatives in which a -CHO group has replaced a -H in the indole ring. Similar reactions are observed when 5-hydroxytryptophan, 5-fluorotryptophan or N-methylindolacetate is used instead of tryptophan or when the chloroform is replaced with other trichlorinated compounds, such as trichloroacetic acid, trichloroethanol and trichloroethane, as well as the tribrominated compound, bromoform, and the monoiodinated compound, iodoactetate.

Self-assembly of ATP synthase subunit c rings

Subunit c of the H(+) transporting ATP synthase is an essential part of its membrane domain that participates in transmembrane proton conduction. The annular architecture of the subunit c from different species has been previously reported. However, little is known about the type of interactions that affect the formation of c-rings in the ATPase complex. Here we report that subunit c over-expressed in Escherichia coli and purified in non-ionic detergent solutions self-assembles into annular structures in the absence of other subunits of the complex. The results suggest that the ability of subunit c to form rings is determined by its primary structure.

Catalytic properties of Na(+)-translocating V-ATPase in Enterococcus hirae

V-ATPases make up a family of proton pumps distributed widely from bacteria to higher organisms. We found a variant of this family, a Na(+)-translocating ATPase, in a Gram-positive bacterium, Enterococcus hirae. The Na(+)-ATPase was encoded by nine ntp genes from F to D in an ntp operon (ntpFIKECGABDHJ): the ntpJ gene encoded a K(+) transporter independent of the Na(+)-ATPase. Expression of this operon, encoding two transport systems for Na(+) and K(+) ions, was regulated at the transcriptional level by intracellular Na(+) as the signal. Structural aspects and catalytic properties of purified Na(+)-ATPase closely resembled those of other V-type H(+)-ATPases. Interestingly, the E. hirae enzyme showed a very high affinity for Na(+) at catalytic reaction. This property enabled the measurement of ion binding to this ATPase for the first time in the study of V- and F-ATPases. Properties of Na(+) binding to V-ATPase were consistent with the model that V-ATPase proteolipids form a rotor ring consisting of hexamers, each having one cation binding site. We propose here a structure model of Na(+) binding sites of the enzyme.

The Na(+) cycle in Acetobacterium woodii: identification and characterization of a Na(+) translocating F(1)F(0)-ATPase with a mixed oligomer of 8 and 16 kDa proteolipids

The homoacetogenic bacterium Acetobacterium woodii relies on a sodium ion current across its cytoplasmic membrane for energy-dependent reactions. The sodium ion potential is established by a yet to be identified primary, electrogenic pump connected to the Wood-Ljungdahl pathway. Reactions possibly involved in Na(+) export are discussed. The electrochemical sodium ion potential generated is used to drive endergonic reactions such as flagellar rotation and ATP synthesis. Biochemical and molecular data identified the Na(+)-ATPase of A. woodii as a typical member of the F(1)F(0) class of ATPases. Its catalytic properties and the hypothetical sodium ion binding site in subunit c are discussed. The encoding genes were cloned and, surprisingly, the atp operon was shown to contain multiple copies of genes encoding subunit c. Two copies encode identical 8 kDa proteolipids, and a third copy arose by duplication and subsequent fusion of two genes. Furthermore, the duplicated subunit c does not contain the ion binding site in hair pin two. Biochemical and molecular data revealed that all three copies of subunit c constitute a mixed oligomer. The evolution of the structure and function of subunit c in ATPases from eucarya, bacteria, and archaea is discussed.

Identification of subunits a, b, and c1 from Acetobacterium woodii Na+-F1F0-ATPase. Subunits c1, c2, AND c3 constitute a mixed c-oligomer

The Na(+)-F(1)F(0)-ATPase operon of Acetobacterium woodii was recently shown to contain, among eleven atp genes, those genes that encode subunit a and b, a gene encoding a 16-kDa proteolipid (subunit c(1)), and two genes encoding 8-kDa proteolipids (subunits c(2) and c(3)). Because subunits a, b, and c(1) were not found in previous enzyme preparations, we re-determined the subunit composition of the enzyme. The genes were overproduced, and specific antibodies were raised. Western blots revealed that subunits a, b, and c(1) are produced and localized in the cytoplasmic membrane. Membrane protein complexes were solubilized by dodecylmaltoside and separated by blue native-polyacrylamide gel electrophoresis, and the ATPase subunits were resolved by SDS-polyacrylamide gel electrophoresis. N-terminal sequence analyses revealed the presence of subunits a, c(2), c(3), b, delta, alpha, gamma, beta, and epsilon. Biochemical and immunological analyses revealed that subunits c(1), c(2), and c(3) are all part of the c-oligomer, the first of a F(1)F(0)-ATPase that contains 8- and 16-kDa proteolipids.

The mechanochemistry of V-ATPase proton pumps

The vacuolar H(+)-ATPases (V-ATPases) are a universal class of proton pumps that are structurally similar to the F-ATPases. Both protein families are characterized by a membrane-bound segment (V(o), F(o)) responsible for the translocation of protons, and a soluble portion, (V(1), F(1)), which supplies the energy for translocation by hydrolyzing ATP. Here we present a mechanochemical model for the functioning of the V(o) ion pump that is consistent with the known structural features and biochemistry. The model reproduces a variety of experimental measurements of performance and provides a unified view of the many mechanisms of intracellular pH regulation.

Molecular models of the structural arrangement of subunits and the mechanism of proton translocation in the membrane domain of F(1)F(0) ATP synthase

Subunit c of the proton-transporting ATP synthase of Escherichia coli forms an oligomeric complex in the membrane domain that functions in transmembrane proton conduction. The arrangement of subunit c monomers in this oligomeric complex was studied by scanning mutagenesis. On the basis of these studies and structural information on subunit c, different molecular models for the potential arrangement of monomers in the c-oligomer are discussed. Intersubunit contacts in the F(0) domain that have been analysed in the past by chemical modification and mutagenesis studies are summarised. Transient contacts of the c-oligomer with subunit a might play a crucial role in the mechanism of proton translocation. Schematic models presented by several authors that interpret proton transport in the F(0) domain by a relative rotation of the c-subunit oligomer against subunit a are reviewed against the background of the molecular models of the oligomer.

A model for the structure of subunit a of the Escherichia coli ATP synthase and its role in proton translocation

Most of what is known about the structure and function of subunit a, of the ATP synthase, has come from the construction and isolation of mutations, and their analysis in the context of the ATP synthase complex. Three classes of mutants will be considered in this review. (1) Cys substitutions have been used for structural analysis of subunit a, and its interactions with subunit c. (2) Functional residues have been identified by extensive mutagenesis. These studies have included the identification of second-site suppressors within subunit a. (3) Disruptive mutations include deletions at both termini, internal deletions, and single amino acid insertions. The results of these studies, in conjunction with information about subunits b and c, can be incorporated into a model for the mechanism of proton translocation in the Escherichia coli ATP synthase.

Structural interpretations of F(0) rotary function in the Escherichia coli F(1)F(0) ATP synthase

F(1)F(0) ATP synthases are known to synthesize ATP by rotary catalysis in the F(1) sector of the enzyme. Proton translocation through the F(0) membrane sector is now proposed to drive rotation of an oligomer of c subunits, which in turn drives rotation of subunit gamma in F(1). The primary emphasis of this review will be on recent work from our laboratory on the structural organization of F(0), which proves to be consistent with the concept of a c(12) oligomeric rotor. From the NMR structure of subunit c and cross-linking studies, we can now suggest a detailed model for the organization of the c(12) oligomer in F(0) and some of the transmembrane interactions with subunits a and b. The structural model indicates that the H(+)-carrying carboxyl of subunit c is located between subunits of the c(12) oligomer and that two c subunits pack in a front-to-back manner to form the proton (cation) binding site. The proton carrying Asp61 side chain is occluded between subunits and access to it, for protonation and deprotonation via alternate entrance and exit half-channels, requires a swiveled opening of the packed c subunits and stepwise association with different transmembrane helices of subunit a. We suggest how some of the structural information can be incorporated into models of rotary movement of the c(12) oligomer during coupled synthesis of ATP in the F(1) portion of the molecule.

Na+ binding of V-type Na+-ATPase in Enterococcus hirae

Rotation catalysis theory has been successfully applied to the molecular mechanism of the ATP synthase (F(0)F(1)-ATPase) and probably of the vacuolar ATPase. We investigated the ion binding step to Enterococcus hirae Na(+)-translocating V-ATPase. The kinetics of Na(+) binding to purified V-ATPase suggested 6 +/- 1 Na(+) bound/enzyme molecule, with a single high affinity (K(d(Na(+()))) = 15 +/- 5 micrometer). The number of cation binding sites is consistent with the model that V-ATPase proteolipids form a rotor ring consisting of hexamers, each having one cation binding site. Release of the bound (22)Na(+) from purified molecules in a chasing experiment showed two phases: a fast component (about two-thirds of the total amount of bound Na(+); k(exchange) > 1.7 min(-1)) and a slow component (about one-third of the total; k(exchange) = 0.16 min(-1)), which changes to the fast component by adding ATP or ATPgammaS. This suggested that about two-thirds of the Na(+) binding sites of the Na(+)-ATPase are readily accessible from the aqueous phase and that the slow component is important for the transport reaction.

Mutations in single hairpin units of genetically fused subunit c provide support for a rotary catalytic mechanism in F(0)F(1) ATP synthase

Previously, we generated genetically fused dimers and trimers of subunit c of the Escherichia coli ATP synthase based upon the precedent of naturally occurring dimers in V-type H(+)-transporting ATPases. The c(2) and c(3) oligomers have proven useful in testing hypothesis regarding the mechanism of energy coupling. In the first part of this paper, the uncoupling Q42E substitution has been introduced into the second loop of the c(2) dimer or the third loop of the c(3) trimer. Both mutant proteins proved to be as functional as the wild type c(2) dimer or wild type c(3) trimer. The results argue against an obligatory movement of the epsilon subunit between loops of monomeric subunit c in the c(12) oligomer during rotary catalysis. Rather, the results support the hypothesis that the c-epsilon connection remains fixed as the c-oligomer rotates. In the second section of this paper, we report on the effect of substitution of the proton translocating Asp(61) in every second helical hairpin of the c(2) dimer, or in every third hairpin of the c(3) trimer. Based upon the precedent of V-type ATPases, where the c(2) dimer occurs naturally with a single proton translocating carboxyl in every second hairpin, these modified versions of the E. coli c(2) and c(3) fused proteins were predicted to have a functional H(+)-transporting ATPase activity, with a reduced H(+)/ATP stoichiometry, but to be inactive as ATP synthases. A variety of Asp(61)-substituted proteins proved to lack either activity indicating that the switch in function in V-type ATPases is a consequence of more than a single substitution.

Structure of the membrane domain of subunit b of the Escherichia coli F0F1 ATP synthase

The structure of the N-terminal transmembrane domain (residues 1-34) of subunit b of the Escherichia coli F0F1-ATP synthase has been solved by two-dimensional 1H NMR in a membrane mimetic solvent mixture of chloroform/methanol/H2O (4:4:1). Residues 4-22 form an alpha-helix, which is likely to span the hydrophobic domain of the lipid bilayer to anchor the largely hydrophilic subunit b in the membrane. The helical structure is interrupted by a rigid bend in the region of residues 23-26 with alpha-helical structure resuming at Pro-27 at an angle offset by 20 degrees from the transmembrane helix. In native subunit b, the hinge region and C-terminal alpha-helical segment would connect the transmembrane helix to the cytoplasmic domain. The transmembrane domains of the two subunit b in F0 were shown to be close to each other by cross-linking experiments in which single Cys were substituted for residues 2-21 of the native subunit and b-b dimer formation tested after oxidation with Cu(II)(phenanthroline)2. Cys residues that formed disulfide cross-links were found with a periodicity indicative of one face of an alpha-helix, over the span of residues 2-18, where Cys at positions 2, 6, and 10 formed dimers in highest yield. A model for the dimer is presented based upon the NMR structure and distance constraints from the cross-linking data. The transmembrane alpha-helices are positioned at a 23 degrees angle to each other with the side chains of Thr-6, Gln-10, Phe-14, and Phe-17 at the interface between subunits. The change in direction of helical packing at the hinge region may be important in the functional interaction of the cytoplasmic domains.

Genetic fusions of subunit c in the F0 sector of H+-transporting ATP synthase. Functional dimers and trimers and determination of stoichiometry by cross-linking analysis

The multicopy c subunit of the H+-transporting ATP synthase of Escherichia coli folds through the transmembrane F0 sector as a hairpin of two hydrophobic alpha-helices with the proton-translocating aspartyl-61 side chain centered in the second transmembrane helix. The number of subunits c in the F0 complex, which is thought to determine the H+-pumping/ATP stoichiometry, was previously not determined with exactness but thought to range from 9-12. The studies described here indicate that the exact number is 12. Based upon the precedent of the subunit c in vacuolar-type ATPases, which are composed of four transmembrane helices and seem to have evolved by gene duplication of an F0-type progenitor gene, we constructed genetically fused dimers and trimers of E. coli subunit c. Both the dimeric and trimeric forms proved to be functional. These results indicate that the total number of subunit c in F0 should be a multiple of 2 and 3. Based upon a previous study in which the oligomeric organization of c subunits in F0 was determined by cross-linking of Cys-substituted subunits (Jones, P. C. , Jiang, W., and Fillingame, R. H. (1998) J. Biol. Chem. 273, 17178-17185), we introduced Cys into the first and last transmembrane helices of subunit c monomers, dimers, and trimers and attempted to generate cross-linked products by oxidation with Cu(II)-(1,10-phenanthroline)2. Double Cys substitutions at two sets of positions gave rise to extensive cross-linked multimers. Multimers of the monomer that extended up to the position of c12 were correlated and calibrated with distinct cross-linked species of the appropriate doubly Cys-substituted dimers (i.e. c2, c4, . c12) and doubly Cys-substituted trimers (i.e. c3, c6, c9, c12). The results show that there are 12 copies of subunit c per F0 in E. coli, the exact number having both mechanistic and structural significance.

Molecular architecture of the c-subunit oligomer in the membrane domain of F-ATPases probed by tryptophan substitution mutagenesis

Subunit c of the proton-transporting ATP synthase of Escherichia coli forms an oligomeric complex in the membrane domain that functions in transmembrane proton conduction. In order to gain some insight into the architecture of this oligomeric complex, the transmembrane region in the C-terminal membrane-spanning segment was analysed by a site-directed mutagenesis approach. Tryptophan substitution of consecutive residues in positions 61 to 72 of subunit c was used to identify residues oriented towards a helix-helix surface or an accessible phase in the oligomeric complex. Mutants were analysed in functional assays of ATP hydrolysis, ATP synthesis and ATP-dependent proton transport. Function was disrupted according to a pattern that identified inter- and intramolecular contacts in the c-subunit oligomer. Screening experiments on minimal medium support the helix-helix contacts found in the functional assays. The results add strong constraints to the potential orientation of the monomers in the oligomeric complex and are discussed against the background of different structural models that have been proposed for the c-subunit oligomer.

Subunit organization and structure in the F0 sector of Escherichia coli F1F0 ATP synthase

In this review, we summarize recent work from our laboratory which establishes the topology and nearest neighbor organization of subunits in the F0 sector of the H+ transporting ATP synthase of Escherichia coli. The E. coli F0 sector is composed of three subunits in an a1b2c12 stoichiometric ratio. Crosslinking experiments with genetically introduced Cys establish a ring-like organization of the 12 c subunits with subunits a and b lying to the outside of the ring. The results are interpreted using an atomic resolution structural model of monomeric subunit c in a chloroform-methanol-water (4:4:1, v/v/v) solution, derived by heteronuclear NMR (M.E. Girvin, F. Abildgaard, V. Rastogi, J. Markley, R.H. Fillingame, in press). The crosslinking results validate many predictions of the structural model and confirm a front-to-back-type packing of two subunit c into a functional dimer, as was first predicted from genetic studies. Aspartyl-61, the proton translocating residue, lies at the center of the four transmembrane helices of the functional dimer, rather than at the periphery of the subunit c ring. Subunit a is shown to fold with five transmembrane helices, and a functionally important interaction of transmembrane helix-4 with transmembrane helix-2 of subunit c is established. The single transmembrane helices of the two subunit b dimerize in the membrane. The structure of the transmembrane segment of subunit b is predicted from the NMR structure of the monomeric peptide.

Energy transduction in ATP synthase

Mitochondria, bacteria and chloroplasts use the free energy stored in transmembrane ion gradients to manufacture ATP by the action of ATP synthase. This enzyme consists of two principal domains. The asymmetric membrane-spanning F0 portion contains the proton channel, and the soluble F1 portion contains three catalytic sites which cooperate in the synthetic reactions. The flow of protons through F0 is thought to generate a torque which is transmitted to F1 by an asymmetric shaft, the coiled-coil gamma-subunit. This acts as a rotating 'cam' within F1, sequentially releasing ATPs from the three active sites. The free-energy difference across the inner membrane of mitochondria and bacteria is sufficient to produce three ATPs per twelve protons passing through the motor. It has been suggested that this proton motive force biases the rotor's diffusion so that F0 constitutes a rotary motor turning the gamma shaft. Here we show that biased diffusion, augmented by electrostatic forces, does indeed generate sufficient torque to account for ATP production. Moreover, the motor's reversibility-supplying torque from ATP hydrolysis in F1 converts the motor into an efficient proton pump-can also be explained by our model.

Reconstitution of beef heart mitochondrial F0F1 in reverse phase evaporation vesicles

Beef heart mitochondrial F0F1 was reconstituted in proteoliposomes by a new procedure. MF0F1 was inserted in preformed reverse phase evaporation vesicles of large diameters prepared from asolectin (MF0F1-REV). Reconstitution was mediated by Triton X-100, which was subsequently removed by treatment with Bio-Beads. Parameters which resulted in optimal reconstitution were described. The MF0F1-REV proteoliposomes catalyzed an exchange between Pi and ATP and were capable of proton pumping. Both reactions were inhibited by oligomycin and uncoupler of oxidative phosphorylation. The range of Pi-ATP exchange activity of the proteoliposomes (70-110 nmol min[-1] mg[-1]) compared favorably with activities obtained in vesicles reconstituted by cholate dialysis or cholate dilution. The most important aspect of this method is that, unlike other reconstitution methods, exogenous F1 and other coupling factors are not required to obtain high Pi-ATP exchange activity by MF0F1-REV. This simple and rapid reconstitution procedure should be useful for future studies dealing with functional analysis of MF0F1.

The vacuolar H+-ATPase: a universal proton pump of eukaryotes

The vacuolar H+-ATPase (V-ATPase) is a universal component of eukaryotic organisms. It is present in the membranes of many organelles, where its proton-pumping action creates the low intra-vacuolar pH found, for example, in lysosomes. In addition, there are a number of differentiated cell types that have V-ATPases on their surface that contribute to the physiological functions of these cells. The V-ATPase is a multi-subunit enzyme composed of a membrane sector and a cytosolic catalytic sector. It is related to the familiar FoF1 ATP synthase (F-ATPase), having the same basic architectural construction, and many of the subunits from the two display identity with one another. All the core subunits of the V-ATPase have now been identified and much is known about the assembly, regulation and pharmacology of the enzyme. Recent genetic analysis has shown the V-ATPase to be a vital component of higher eukaryotes. At least one of the subunits, i.e. subunit c (ductin), may have multifunctional roles in membrane transport, providing a possible pathway of communication between cells. The structure of the membrane sector is known in some detail, and it is possible to begin to suggest how proton pumping is coupled to ATP hydrolysis.

Catalytic mechanism of F1-ATPase

The structure of the core catalytic unit of ATP synthase, alpha 3 beta 3 gamma, has been determined by X-ray crystallography, revealing a roughly symmetrical arrangement of alternating alpha and beta subunits around a central cavity in which helical portions of gamma are found. A low-resolution structural model of F0, based on electron spectroscopic imaging, locates subunit a and the two copies of subunit b outside of a subunit c oligomer. The structures of individual subunits epsilon and c (largely) have been solved by NMR spectroscopy, but the oligomeric structure of c is still unknown. The structures of subunits a and delta remain undefined, that of b has not yet been defined but biochemical evidence indicates a credible model. Subunits gamma, epsilon, b, and delta are at the interface between F1 and F0; gamma epsilon complex forms one element of the stalk, interacting with c at the base and alpha and beta at the top. The locations of b and delta are less clear. Elucidation of the structure F0, of the stalk, and of the entire F1F0 remains a challenging goal.

The ATP synthase--a splendid molecular machine

An X-ray structure of the F1 portion of the mitochondrial ATP synthase shows asymmetry and differences in nucleotide binding of the catalytic beta subunits that support the binding change mechanism with an internal rotation of the gamma subunit. Other structural and mutational probes of the F1 and F0 portions of the ATP synthase are reviewed, together with kinetic and other evaluations of catalytic site occupancy and behavior during hydrolysis or synthesis of ATP. Subunit function as related to proton translocation and rotational catalysis is considered. Physical demonstrations of the gamma subunit rotation have been achieved. The findings have implications for other enzymatic catalyses.

The F0F1-type ATP synthases of bacteria: structure and function of the F0 complex

Membrane-bound ATP synthases (F0F1-ATPases) of bacteria serve two important physiological functions. The enzyme catalyzes the synthesis of ATP from ADP and inorganic phosphate utilizing the energy of an electrochemical ion gradient. On the other hand, under conditions of low driving force, ATP synthases function as ATPases, thereby generating a transmembrane ion gradient at the expense of ATP hydrolysis. The enzyme complex consists of two structurally and functionally distinct parts: the membrane-integrated ion-translocating F0 complex and the peripheral F1 complex, which carries the catalytic sites for ATP synthesis and hydrolysis. The ATP synthase of Escherichia coli, which has been the most intensively studied one, is composed of eight different subunits, five of which belong to F1, subunits alpha, beta, gamma, delta, and epsilon (3:3:1:1:1), and three to F0, subunits a, b, and c (1:2:10 +/- 1). The similar overall structure and the high amino acid sequence homology indicate that the mechanism of ion translocation and catalysis and their mode of coupling is the same in all organisms.

The energy transmission in ATP synthase: from the gamma-c rotor to the alpha 3 beta 3 oligomer fixed by OSCP-b stator via the beta DELSEED sequence

ATP synthase (F0F1) is driven by an electrochemical potential of H+ (delta microH+). F0F1 is composed of an ion-conducting portion (F0) and a catalytic portion (F1). The subunit composition of F1 is a alpha 3 beta 3 gamma delta epsilon. The active alpha 3 beta 3 oligomer, characterized by X-ray crystallography, has been obtained only from thermophilic F1 (TF1). We proposed in 1984 that ATP is released from the catalytic site (C site) by a conformational change induced by the beta DELSEED sequence via gamma delta epsilon-F0. In fact, cross-linking of beta DELSEED to gamma stopped the ATP-driven rotation of gamma in the center of alpha 3 beta 3. The torque of the rotation is estimated to be 420 pN x A from the delta microH+ and H(+)-current through F0F1. The angular velocity (omega) of gamma is the rate-limiting step, because delta microH+ increased the Vmax of H+ current through F0, but not the Km(ATP). The rotational unit of F0 (= ab2c10) is pi/5, while that in alpha 3 beta 3 is 2 pi/3. This difference is overcome by an analog-digital conversion via elasticity around beta DELSEED with a threshold to release ATP. The alpha beta distance at the C site is about 9.6 A (2,8-diN3-ATP), and tight Mg-ATP binding in alpha 3 beta 3 gamma was shown by ESR. The rotational relaxation of TF1 is too rapid (phi = 100 nsec), but the rate of AT(D)P-induced conformational change of alpha 3 beta 3 measured with a synchrotron is close to omega. The ATP bound between the P-loop and beta E188 is released by the shift of beta DELSEED from gamma RGL. Considering the viscosity resistance and inertia of the free rotor (gamma-c), there may be a stator containing OSCP (= delta of TF1) and F0-d to hold free rotation of alpha 3 beta 3.

Interaction of dibutyltin-3-hydroxyflavone bromide with the 16 kDa proteolipid indicates the disposition of proton translocation sites of the vacuolar ATPase

The organotin complex dibutyltin-3-hydroxyflavone bromide [Bu2Sn(of)Br] has been shown to bind to the 16 kDa proteolipid of Nephrops norvegicus, either in the form of the native protein or after heterologous expression in Saccharomyces and assembly into a hybrid vacuolar H(+)-ATPase. Titration of Bu2Sn(of)Br against the 16 kDa proteolipid results in a marked fluorescence enhancement, consistent with binding to a single affinity site on the protein. Vacuolar ATPase-dependent ATP hydrolysis was also inhibited by Bu2Sn(of)Br, with the inhibition constant correlating well with dissociation constants determined for binding of Bu2Sn(of)Br complex to the proteolipid. The fluorescence enhancement produced by interaction of probe with proteolipid can be back-titrated by dicyclohexylcarbodiimide (DCCD), which covalently modifies Glu140 on helix-4 of the polypeptide. Expression of a mutant proteolipid in which Glu140 was changed to a glycine resulted in assembly of a vacuolar ATPase which was inactive in proton pumping and which had reduced ATPase activity. Co-expression studies with this mutant and wild-type proteolipids suggest that proton pumping can only occur in a vacuolar ATPase containing exclusively wild-type proteolipid. The fluorescent enhancement of affinity of Bu2Sn(of)Br for the mutant proteolipid was not significantly altered, with the organotin complex having no effect on residual ATPase activity. Interaction of the probe with mutant proteolipid was unaffected by DCCD. These data suggest an overlap in the binding sites of organotin and DCCD, and have implications for the organization and structure of proton-translocating pathways in the facuolar H(+)-ATPase.