Tendon and ligament fibrillar crimps give rise to left-handed helices of collagen fibrils in both planar and helical crimps

Controlled Structural Relaxation of Aramid Nanofibers for Superstretchable Polymer Fibers with High Toughness and Heat Resistance

Polymer fibers that combine high toughness and heat resistance are hard to achieve, which, however, hold tremendous promise in demanding applications such as aerospace and military. This prohibitive design task exists due to the opposing property dependencies on chain dynamics because traditional heat-resistant materials with rigid molecular structures typically lack the mechanism of energy dissipation. Aramid nanofibers have received great attention as high-performance nanoscale building units due to their intriguing mechanical and thermal properties, but their distinct structural features are yet to be fully captured. We show that aramid nanofibers form nanoscale crimps during the removal of water, which primarily resides at the defect planes of pleated sheets, where the folding can occur. The precise control of such a structural relaxation can be realized by exerting axial loadings on hydrogel fibers, which allows the emergence of aramid fibers with varying angles of crimps. These crimped fibers integrate high toughness with heat resistance, thanks to the extensible nature of nanoscale crimps with rigid molecular structures of poly(p-phenylene terephthalamide), promising as a template for stable stretchable electronics. The tensile strength/modulus (392-944 MPa/11-29 GPa), stretchability (25-163%), and toughness (154-445 MJ/cm3) are achieved according to the degree of crimping. Intriguingly, a toughness of around 430 MJ/m3 can be maintained after calcination below the relaxation temperature (259 °C) for 50 h. Even after calcination at 300 °C for 10 h, a toughness of 310 MJ/m3 is kept, outperforming existing polymer materials. Our multiscale design strategy based on water-bearing aramid nanofibers provides a potent pathway for tackling the challenge for achieving conflicting property combinations.

Novel Insights Into the Intratendinous Pressure Behavior of the Achilles Tendon in Athletes

BACKGROUND

In contrast to other musculoskeletal tissues, the normal pressure behavior of the Achilles tendon is poorly understood. This study aimed to explore the normal intratendinous and perfusion pressures of the Achilles tendon at rest and during exercise, and investigate potential correlations with tendon load and morphology.

HYPOTHESIS

Intratendinous and perfusion pressures of the Achilles tendon exhibit similarities to other musculoskeletal tissues and depend on tendon load and morphology.

STUDY DESIGN

Observational study.

LEVEL OF EVIDENCE

Level 3.

METHODS

A total of 22 recreational athletes were enrolled. Demographics, activity level, and blood pressures were recorded. Achilles tendon thickness and echogenicity were assessed 25 mm proximal to the posterosuperior calcaneal border. In this region, intratendinous and perfusion pressures of the Achilles tendon were measured at rest and during isometric plantarflexion up to 50 N, using the microcapillary infusion technique. Linear mixed models were used to investigate the effects of plantarflexion force, tendon thickness, and echogenicity on intratendinous and perfusion pressures.

RESULTS

At rest, intratendinous and perfusion pressures of the Achilles tendon were 43.8 ± 15.2 and 48.7 ± 18.4 mmHg, respectively. Intratendinous pressure increased linearly with plantarflexion force, reaching 101.3 ± 25.5 mmHg at 50 N (P < 0.01). Perfusion pressure showed an inverse relationship, dropping below 0 mmHg at 50 N (P < 0.01). Neither intratendinous nor perfusion pressures of the Achilles tendon correlated with tendon thickness or echogenicity.

CONCLUSION

The normal intratendinous resting pressure of the Achilles tendon is higher than other musculoskeletal tissues, making it more susceptible to ischemia. During exercise, intratendinous pressure increases significantly to a level that lowers perfusion pressure, thereby compromising blood supply at already low plantarflexion forces.

CLINICAL RELEVANCE

Given the potential role of ischemia in Achilles tendinopathy, our findings caution against intratendinous injections, as they may exacerbate high intratendinous resting pressure, and against prolonged postexercise tendon stretching, as the associated rise in intratendinous pressure may impair the required hyperemic response.

Contributions of collagen and elastin to elastic behaviours of tendon fascicle

Tendon exhibits the capacity to be stretched and to return to its original length without suffering structural damage in vivo, a capacity known as elastic recoil. Collagen fibres are aligned longitudinally and elastin fibres mostly run parallel to collagen fibres in tendon. However, their interactions and contributions to tendon elastic behaviours are not well understood. The present study examined functional roles of collagen and elastin in tendon elastic behaviours using a variety of mechanical tests. We prepared three types of fascicle specimens from mouse tail tendon: fascicles freshly isolated, those digested with elastase in PBS to selectively remove elastin, and those incubated in PBS without elastase. A quasi-static tensile test demonstrated that elastase-treated fascicles had higher tangent moduli and strength compared to fresh and PBS fascicles. Cyclic stretching tests showed that fresh and PBS fascicles could withstand cyclic strain at both small and large amplitudes, but elastase-treated fascicles could only behave elastically to a limited degree. Fibre-sliding analysis revealed that fresh fascicles could be elongated both through stretching of collagen fibers and through movement of the fibres. However, elastase-treated fascicles could be stretched only via fibre stretching. This evidence suggests that normal tendons can be extended through both fibre stretching and fibre sliding, whereas tendons without elastin can only extend as much as collagen fibers can withstand. Accordingly, collagen fibres mainly contribute to tendon elastic behaviours by furnishing rigidity and elasticity, whereas elastin provides tendon viscoelasticity and also enables sliding of collagen fibres during elastic behaviours. STATEMENT OF SIGNIFICANCE: The present study revealed distinct mechanical functions of collagen and elastin fibres in elastic behaviours of mouse tail tendon fascicle using a variety of mechanical tests at both microscopic and macroscopic levels. It was demonstrated that collagen mainly governs tendon fascicle rigidity and elasticity, but only possesses limited extensibility, whereas elastin contributes to viscoelasticity and collagen fibre sliding, enabling elastic recoil behaviour against relatively large deformation. By their interactions, tendon can be elongated without suffering major structural damage and withstand a large magnitude of tensile force in response to mechanical loading. Such information should be particularly useful in designing collagen-based biomaterials such as artificial tendons, in that previous studies have merely considered collagen without incorporation of elastin.

Extracellular matrix biomechanical roles and adaptation in health and disease

Extracellular matrices (ECMs) are dynamic 3D macromolecular networks that exhibit structural characteristics and composition specific to different tissues, serving various biomechanical and regulatory functions. The interactions between ECM macromolecules such as collagen, elastin, glycosaminoglycans (GAGs), proteoglycans (PGs), fibronectin, and laminin, along with matrix effectors and water, contribute to the unique cellular and tissue functional properties during organ development, tissue homoeostasis, remodeling, disease development, and progression. Cells adapt to environmental changes by adjusting the composition and array of ECM components. ECMs, forming the 3D bioscaffolds of our body, provide mechanical support for tissues and organs and respond to the environmental variables influencing growth and final adult body shape in mammals. Different cell types display distinct adaptations to the respective ECM environments. ECMs regulate biological processes by controlling the diffusion of infections and inflammations, sensing and adapting to external stimuli and gravity from the surrounding habitat, and, in the context of cancer, interplaying with and regulating cancer cell invasion and drug resistance. Alterations in the ECM composition in pathological conditions drive adaptive responses of cells and could therefore result in abnormal cell behavior and tissue dysfunction. Understanding the biomechanical functionality, adaptation, and roles of distinct ECMs is essential for research on various pathologies, including cancer progression and multidrug resistance, which is of crucial importance for developing targeted therapies. In this Viewpoint article, we critically present and discuss specific biomechanical functions of ECMs and regulatory adaptation mechanisms in both health and disease, with a particular focus on cancer progression.

Direct measurements of collagen fiber recruitment in the posterior pole of the eye

Collagen is the main load-bearing component of the peripapillary sclera (PPS) and lamina cribrosa (LC) in the eye. Whilst it has been shown that uncrimping and recruitment of the PPS and LC collagen fibers underlies the macro-scale nonlinear stiffening of both tissues with increased intraocular pressure (IOP), the uncrimping and recruitment as a function of local stretch have not been directly measured. This knowledge is crucial to understanding their functions in bearing loads and maintaining tissue integrity. In this project we measured local stretch-induced collagen fiber bundle uncrimping and recruitment curves of the PPS and LC. Thin coronal samples of PPS and LC of sheep eyes were mounted and stretched biaxially quasi-statically using a custom system. At each step, we imaged the PPS and LC with instant polarized light microscopy and quantified pixel-level (1.5 μm/pixel) collagen fiber orientations. We used digital image correlation to measure the local stretch and quantified collagen crimp by the circular standard deviation of fiber orientations, or waviness. Local stretch-recruitment curves of PPS and LC approximated sigmoid functions. PPS recruited more fibers than the LC at the low levels of stretch. At 10% stretch the curves crossed with 75% bundles recruited. The PPS had higher uncrimping rate and waviness remaining after recruitment than the LC: 0.9º vs. 0.6º and 3.1º vs. 2.7º. Altogether our findings support describing fiber recruitment of both PPS and LC with sigmoid curves, with the PPS recruiting faster and at lower stretch than the LC, consistent with a stiffer tissue. STATEMENT OF SIGNIFICANCE: Peripapillary sclera (PPS) and lamina cribrosa (LC) collagen recruitment behaviors are central to the nonlinear mechanical behavior of the posterior pole of the eye. How PPS and LC collagen fibers recruit under stretch is crucial to develop constitutive models of the tissues but remains unclear. We used image-based stretch testing to characterize PPS and LC collagen fiber bundle recruitment under local stretch. We found that fiber-level stretch-recruitment curves of PPS and LC approximated sigmoid functions. PPS recruited more fibers at a low stretch, but at 10% bundle stretch the two curves crossed with 75% bundles recruited. We also found that PPS and LC fibers had different uncrimping rates and non-zero waviness's when recruited.

Torsion and bistability of double-twist elastomers

We investigate the elastic properties of anisotropic elastomers with a double-twist director field, which is a model for collagen fibrils or blue phases. We observe a significant Poynting-like effect, coupling torsion (fibril twist) and extension. For freely-rotating boundary conditions, we identify a structural bistability at very small extensional strains which undergoes a saddle-node bifurcation at a critical strain - at approximately 1% strain for a parameterization appropriate for collagen fibrils. With clamped boundary conditions appropriate for many experimental setups, the bifurcation is not present. We expect significant helical shape effects when fixed torsion does not equal the equilibrium torsion of freely-rotating boundary conditions, due to residual torques.

Direct measurements of collagen fiber recruitment in the posterior pole of the eye

Collagen is the main load-bearing component of the peripapillary sclera (PPS) and lamina cribrosa (LC) in the eye. Whilst it has been shown that uncrimping and recruitment of the PPS and LC collagen fibers underlies the macro-scale nonlinear stiffening of both tissues with increased intraocular pressure (IOP), the uncrimping and recruitment as a function of local stretch have not been directly measured. This knowledge is crucial for the development of constitutive models associating micro and macro scales. In this project we measured local stretch-induced collagen fiber bundle uncrimping and recruitment curves of the PPS and LC. Thin coronal samples of PPS and LC of sheep eyes were mounted and stretched biaxially quasi-statically using a custom system. At each step, we imaged the PPS and LC with instant polarized light microscopy and quantified pixel-level (1.5 μm/pixel) collagen fiber orientations. We used digital image correlation to measure the local stretch and quantified collagen crimp by the circular standard deviation of fiber orientations, or waviness. Local stretch-recruitment curves of PPS and LC approximated sigmoid functions. PPS recruited more fibers than the LC at the low levels of stretch. At 10% stretch the curves crossed with 75% bundles recruited. The PPS had higher uncrimping rate and waviness remaining after recruitment than the LC: 0.9° vs. 0.6° and 3.1° vs. 2.7°. Altogether our findings support describing fiber recruitment of both PPS and LC with sigmoid curves, with the PPS recruiting faster and at lower stretch than the LC, consistent with a stiffer tissue.

Tropocollagen springs allow collagen fibrils to stretch elastically

The mechanical properties of connective tissues are tailored to their specific function, and changes can lead to dysfunction and pathology. In most mammalian tissues the mechanical environment is governed by the micro- and nano-scale structure of collagen and its interaction with other tissue components, however these hierarchical properties remain poorly understood. In this study we use the human cornea as a model system to characterise and quantify the dominant deformation mechanisms of connective tissue in response to cyclic loads of physiological magnitude. Synchronised biomechanical testing, x-ray scattering and 3D digital image correlation revealed the presence of two dominant mechanisms: collagen fibril elongation due to a largely elastic, spring-like straightening of tropocollagen supramolecular twist, and a more viscous straightening of fibril crimp that gradually increased over successive loading cycles. The distinct mechanical properties of the two mechanisms suggest they have separate roles in vivo. The elastic, spring-like mechanism is fast-acting and likely responds to stresses associated with the cardiac cycle, while the more viscous crimp mechanism will respond to slower processes, such as postural stresses. It is anticipated that these findings will have broad applicability to understanding the normal and pathological functioning of other connective tissues such as skin and blood vessels that exhibit both helical structures and crimp.

Statement of significance

The tropocollagen spring mechanism allows collagen fibrils from some tissues to elongate significantly under small loads, and its recent discovery has the potential to change our fundamental understanding of how tissue deforms. This time-resolved study quantifies the contribution of the spring mechanism to the local strain in stretched tissue and compares it to the contribution associated with the straightening of fibril waviness, the widely accepted primary low-load strain mechanism. The spring mechanism contributed more to the local tissue strain than fibril straightening, and was found to be elastic while fibril straightening was more viscous. The results suggest that the viscoelastic behaviour of a biomaterial is controlled, at least in part, by the relative amount of fibril-scale crimp and tropocollagen supramolecular twist.

Preparation and Evaluation of the Curative Effect of Blue Shark (Prionace glauca) Skin Collagen Composite Gel in a Rat Oral Ulcers Model

Objective: To evaluate the curative effect of blue shark skin collagen composite gel on oral mucosal ulcer using the rat oral ulcers model stimulated by glacial acetic acid. Methods: Collagen from blue shark skin was isolated and physiochemically characterized by FTIR, SDS-PAGE and scanning electron microscopy (SEM). Seventy standard male rats were divided into seven groups. The surface and the area of the ulcer were observed and calculated daily. After 12 days of administration, rats in the model group and the control group were killed and the ulcer and surrounding tissues were cut to pieces about one mm3 size. The specimens were stained with 10% formalin solution, paraffinembedded sections, HE staining and light microscope were used to observe the histopathological changes in ulcer tissues. Results: The high-dose group had the fastest ulcer healing effects after 12 days of treatment with blue shark skin collagen composite gel. The composite gel was found to significantly accelerate the healing of oral ulcers in a dose-dependent manner. Conclusion: The blue shark skin collagen composite gel in this study may be a good biomedical material candidate for the treatment of oral ulcers in the near future. Potential of other marine fish skin collagen comples on healing oral ulcers should be also considered.

Topological defects produce kinks in biopolymer filament bundles

Bundles of stiff filaments are ubiquitous in the living world, found both in the cytoskeleton and in the extracellular medium. These bundles are typically held together by smaller cross-linking molecules. We demonstrate, analytically, numerically, and experimentally, that such bundles can be kinked, that is, have localized regions of high curvature that are long-lived metastable states. We propose three possible mechanisms of kink stabilization: a difference in trapped length of the filament segments between two cross-links, a dislocation where the endpoint of a filament occurs within the bundle, and the braiding of the filaments in the bundle. At a high concentration of cross-links, the last two effects lead to the topologically protected kinked states. Finally, we explore, numerically and analytically, the transition of the metastable kinked state to the stable straight bundle.

Tracking tendon fibers to their insertion - a 3D analysis of the Achilles tendon enthesis in mice

Tendon insertions to bone are heavily loaded transitions between soft and hard tissues. The fiber courses in the tendon have profound effects on the distribution of stress along and across the insertion. We tracked fibers of the Achilles tendon in mice in micro-computed tomographies and extracted virtual transversal sections. The fiber tracks and shapes were analyzed from a position in the free tendon to the insertion. Mechanically relevant parameters were extracted. The fiber number was found to stay about constant along the tendon. But the fiber cross-sectional areas decrease towards the insertion. The fibers mainly interact due to tendon twist, while branching only creates small branching clusters with low levels of divergence along the tendon. The highest fiber curvatures were found within the unmineralized entheseal fibrocartilage. The fibers inserting at a protrusion of the insertion area form a distinct portion within the tendon. Tendon twist is expected to contribute to a homogeneous distribution of stress among the fibers. According to the low cross-sectional areas and the high fiber curvatures, tensile and compressive stress are expected to peak at the insertion. These findings raise the question whether the insertion is reinforced in terms of fiber strength or by other load-bearing components besides the fibers. STATEMENT OF SIGNIFICANCE: The presented study is the first analysis of the 3D fiber tracks in macroscopic tendon samples as determined by a combination of cell-maceration, phase-contrast µCT and template-based tracking. The structural findings change the understanding of the tendon-bone insertion and its biomechanics: (1) The insertion is not reinforced in terms of fiber numbers or sizes. Its robustness remains unexplained. (2) The orientation of fibers in the tendon center is higher than in the margins. This arrangement could inspire material development. (3) Fibers inserting at a protrusion of the insertion area stem from a distinct portion within the tendon. The results show that fibrous structure analysis can link macro- to micromechanics and that it is ready for the application to complete muscle-tendon units.

The Specific Molecular Composition and Structural Arrangement of Eleutherodactylus Coqui Gular Skin Tissue Provide Its High Mechanical Compliance

A male Eleutherodactylus Coqui (EC, a frog) expands and contracts its gular skin to a great extent during mating calls, displaying its extraordinarily compliant organ. There are striking similarities between frog gular skin and the human bladder as both organs expand and contract significantly. While the high extensibility of the urinary bladder is attributed to the unique helical ultrastructure of collagen type III, the mechanism behind the gular skin of EC is unknown. We therefore aim to understand the structure-property relationship of gular skin tissues of EC. Our findings demonstrate that the male EC gular tissue can elongate up to 400%, with an ultimate tensile strength (UTS) of 1.7 MPa. Species without vocal sacs, Xenopus Laevis (XL) and Xenopus Muelleri (XM), elongate only up to 80% and 350% with UTS~6.3 MPa and ~4.5 MPa, respectively. Transmission electron microscopy (TEM) and histological staining further show that EC tissues' collagen fibers exhibit a layer-by-layer arrangement with an uninterrupted, knot-free, and continuous structure. The collagen bundles alternate between a circular and longitudinal shape, suggesting an out-of-plane zig-zag structure, which likely provides the tissue with greater extensibility. In contrast, control species contain a nearly linear collagen structure interrupted by thicker muscle bundles and mucous glands. Meanwhile, in the rat bladder, the collagen is arranged in a helical structure. The bladder-like high extensibility of EC gular skin tissue arises despite it having eight-fold lesser elastin and five times more collagen than the rat bladder. To our knowledge, this is the first study to report the structural and molecular mechanisms behind the high compliance of EC gular skin. We believe that these findings can lead us to develop more compliant biomaterials for applications in regenerative medicine.

Role of Biomaterials and Controlled Architecture on Tendon/Ligament Repair and Regeneration

Engineering synthetic scaffolds to repair and regenerate ruptured native tendon and ligament (T/L) tissues is a significant engineering challenge due to the need to satisfy both the unique biological and biomechanical properties of these tissues. Long-term clinical outcomes of synthetic scaffolds relying solely on high uniaxial tensile strength are poor with high rates of implant rupture and synovitis. Ideal biomaterials for T/L repair and regeneration need to possess the appropriate biological and biomechanical properties necessary for the successful repair and regeneration of ruptured tendon and ligament tissues.

Optical Microscopy and Electron Microscopy for the Morphological Evaluation of Tendons: A Mini Review

The morphological characteristics of tendons have been thoroughly evaluated via microscopy. Optical microscopy and electron microscopy are the most commonly used techniques for tendon tissue observation. According to the principles of both microscopy types, preparation and evaluation methods vary. Simple optical microscopy is commonly used in the observation of cells and extracellular matrix, and many stains, including hematoxylin–eosin, Van Gieson, Prussian blue, Alcian blue, and toluidine blue, are used for evaluating cells, collagen fiber arrangement, and noncollagenous proteins. Histological scoring systems have been used in many studies for semi‐quantification. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) are the most commonly used electron microscopy types, and special consideration is needed for the fixation and embedding protocols. Glutaraldehyde followed by osmium is most commonly used in the chemical fixation of tendon tissue, followed by epoxy resin embedment. Longitudinal sections captured in SEM images show the arrangement of collagen fibrils and the cells and lipid drops among them, while cross sections captured in TEM images show the diameter and distribution of collagen fibrils. SEM and TEM are used together for comprehensive evaluations. This mini review is focused on the preparation methodology and related evaluation indexes for the morphological evaluation of tendons.

Wavy nature of collagen fibrils deduced from the dispersion of their second-order nonlinear optical anisotropy parameters ρ

From P-SHG experiments, second-order nonlinear optical anisotropy parameters ρ = χ_ZZZ/χ_ZXX of collagen tissues are calculated assuming the same model of supercoiled collagen fibril characterized by a variable angle θ. Dispersion of experimental ρ values is converted into distribution of θ values based on the wavy nature of collagen fibrils deduced from EM studies. For tendon, the results show that the dispersion of experimental ρ values is mainly due to Poisson photonic shot noise assuming a slight fibrillar undulation with θ = 2.2^° ± 1.8^°. However for skin and vessels, the dispersion of experimental ρ values is mainly due to a stronger fibrillar undulation with θ = 16.2^° ± 1.3^°. The results highlight that this undulation is reduced during the development of liver fibrosis therefore, contributing to the rigidity of the tissue.

The effect of melt electrospun writing fiber orientation onto cellular organization and mechanical properties for application in Anterior Cruciate Ligament tissue engineering

The effect of melt electrospun writing fiber arrangement on cellular behavior has not yet been thoroughly investigated. Cellular orientation is particularly important in the context of ligament tissue engineering for orthopedic applications whereby a high degree of cell alignment is present in the native tissue. The aim of this study was to investigate the response of human mesenchymal stem cells (hMSC) to three different patterned porous polycaprolactone scaffolds (aligned, crimped and random) fabricated by melt electrospinning writing, resulting in 20 μm diameter electrospun fibers. Cell orientation was investigated over 4 weeks in vitro and it was demonstrated that the aligned pattern was capable of orientating the hMSCs towards the main direction of the fibers and this feature was maintained over the entire culture period whereas the orientation was rapidly lost in the crimped pattern. In order to fabricate a functional scaffold for ligament tissue engineering, the scaffolds were rolled in three bundles, subsequently braided and combined with a bone compartment (consisting of a melt electrospun scaffold seeded with osteogenically induced hMSCs) for the development of a Bone-Ligament-Bone (BLB) construct. The mechanical properties of non-cellularized and cellularized BLB constructs were assessed under both quasi-static and cyclic conditions. This revealed that the in vitro maturation significantly softened the BLB constructs and that the mechanical properties were several fold lower than those of native tissue. The cyclic testing demonstrated that the presence of cell sheets resulted in increased resilience and elasticity, even though the global mechanical properties were decreased for the in vitro matured constructs (regardless of the pattern). In conclusion, we demonstrated that melt electrospinning writing fiber organization can induce spontaneous cell alignment and that large cellularized BLB constructs with complex geometry can achieve mechanical resilience under cyclic stretching.

Helical fibrillar microstructure of tendon using serial block-face scanning electron microscopy and a mechanical model for interfibrillar load transfer

Tendon's hierarchical structure allows for load transfer between its fibrillar elements at multiple length scales. Tendon microstructure is particularly important, because it includes the cells and their surrounding collagen fibrils, where mechanical interactions can have potentially important physiological and pathological contributions. However, the three-dimensional (3D) microstructure and the mechanisms of load transfer in that length scale are not known. It has been postulated that interfibrillar matrix shear or direct load transfer via the fusion/branching of small fibrils are responsible for load transfer, but the significance of these mechanisms is still unclear. Alternatively, the helical fibrils that occur at the microstructural scale in tendon may also mediate load transfer; however, these structures are not well studied due to the lack of a three-dimensional visualization of tendon microstructure. In this study, we used serial block-face scanning electron microscopy to investigate the 3D microstructure of fibrils in rat tail tendon. We found that tendon fibrils have a complex architecture with many helically wrapped fibrils. We studied the mechanical implications of these helical structures using finite-element modelling and found that frictional contact between helical fibrils can induce load transfer even in the absence of matrix bonding or fibril fusion/branching. This study is significant in that it provides a three-dimensional view of the tendon microstructure and suggests friction between helically wrapped fibrils as a mechanism for load transfer, which is an important aspect of tendon biomechanics.

Engineering of a Functional Tendon Using Collagen As a Natural Polymer

Reconstruction of a tendon rupture is surgically challenging as each end of the tendon retracts, leaving a substantial gap and direct repair is often not feasible. A tendon graft is required to bridge this defect and restore function. Presently, these gaps are filled with auto-, allo-, or synthetic grafts, but they all have clinical limitations. To address this issue, we developed tissue-engineered grafts by a rapid process using compressed type I collagen, which is the most dominant protein in the tendon. However, biomechanical properties were found to be unsuitable to withstand complete load-bearing in vivo. Hence, a modified suture technique was previously developed to reduce the load on the engineered collagen graft to aid integration in vivo. Using this technique, we tested engineered collagen grafts in vivo on a lapine model in three groups up to 12 weeks without immobilization. Gross observation at 3 and 12 weeks showed the bridge integrated without adhesions with a significant increase in the mechanical, structural and histological properties as compared to 1 week. Insertion of a tissue-engineered collagen graft using a novel load-bearing suture technique which partially loads in vivo showed integration, greater mechanical strength and no adhesion formation in the time period tested. This collagen graft has inherent advantages as compared to the present-day tendon grafts.

High-speed collagen fiber modeling and orientation quantification for optical coherence tomography imaging

Quantifying collagen fiber architecture has clinical and scientific relevance across a variety of tissue types and adds functionality to otherwise largely qualitative imaging modalities. Optical coherence tomography (OCT) is uniquely suited for this task due to its ability to capture the collagen microstructure over larger fields of view than traditional microscopy. Existing image processing techniques for quantifying fiber architecture, while accurate and effective, are very slow for processing large datasets and tend to lack structural specificity. We describe here a computationally efficient method for quantifying and visualizing collagen fiber organization. The algorithm is demonstrated on swine atria, bovine anterior cruciate ligament, and human cervical tissue samples. Additionally, we show an improved performance for images with crimped fiber textures and low signal to noise when compared to similar methods.

Calcaneal Tendon Collagen Fiber Morphometry and Aging

Fibrillar collagen in tendons and its natural development in rabbits are discussed in this paper. Achilles tendons from newborn (~7 days) to elderly (~38 months) rabbits were monitored in intact (n tendons=24) and microtome sectioned (n tendons=11) states with label-free second harmonic generation microscopy. After sectioning, the collagen fiber pattern was irregular for the younger animals and remained oriented parallel to the load axis of the tendon for the older animals. In contrast, the collagen fiber pattern in the intact samples followed the load axis for all the age groups. However, there was a significant difference in the tendon crimp pattern appearance between the age groups. The crimp amplitude (A) and wavelength (Λ) started at very low values (A=2.0±0.6 µm, Λ=19±4 µm) for the newborn animals. Both parameters increased for the sexually mature animals (>5 months old). When the animals were fully mature the amplitude decreased but the wavelength kept increasing. The results revealed that the microtome sectioning artifacts depend on the age of animals and that the collagen crimp pattern reflects the physical growth and development.

Animal Models for Tendon Repair Experiments: A Comparison of Pig, Sheep and Human Deep Flexor Tendons in Zone II

Background: This laboratory study compared pig, sheep and human deep flexor tendons in regards to their biomechanical comparability.

Methods: To investigate the relevant biomechanical properties for tendon repair experiments, the tendons resistance to cheese-wiring (suture drag/splitting) was assessed. Cheese-wiring of a suture through a tendon is an essential factor for repair gapping and failure in a tendon repair.

Results: Biomechanical testing showed that forces required to pulling a uniform suture loop through sheep or pig tendons in Zone II were higher than in human tendons. At time point zero of testing these differences did not reach statistical significance, but differences became more pronounced when forces were measured beyond initial cheese-wiring (2 mm, 5 mm and 10 mm). The stronger resistance to cheese-wiring was more pronounced in the pig tendons. Also regarding size and histology, sheep tendons were more comparable to human tendons than pig tendons.

Conclusions: Differences in tendon bio-properties should be kept in mind when comparing and interpreting the results of laboratory tendon experiments.

Experimental evaluation of multiscale tendon mechanics

Tendon's primary function is a mechanical link between muscle and bone. The hierarchical structure of tendon and specific compositional constituents are believed to be critical for proper mechanical function. With increased appreciation for tendon importance and the development of various technological advances, this review paper summarizes recent experimental approaches that have been used to study multiscale tendon mechanics, includes an overview of studies that have evaluated the role of specific tissue constituents, and also proposes challenges/opportunities facing tendon study. Tendon has been demonstrated to have specific structural characteristics (e.g., multi-level hierarchy, crimp pattern, helix) and complex mechanical properties (e.g., non-linearity, anisotropy, viscoelasticity). Physical mechanisms including uncrimping, fiber sliding, and collagen reorganization have been shown to govern tendon mechanical responses under both static and dynamic loading. Several tendon constituents with relatively small quantities have been suggested to play a role in its mechanics, although some results are conflicting. Further research should be performed to understand the interplay and communication of tendon mechanical properties across levels of the hierarchical structure, and further show how each of these components contribute to tendon mechanics. The studies summarized and discussed in this review have helped elucidate important aspects of multiscale tendon mechanics, which is a prerequisite for analyzing stress/strain transfer between multiple scales and identifying key principles of mechanotransduction. This information could further facilitate interpreting the functional diversity of tendons from different species, different locations, and even different developmental stages, and then better understand and identify fundamental concepts related to tendon degeneration, disease, and healing. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1353-1365, 2017.

Imaging the Nonlinear Susceptibility Tensor of Collagen by Nonlinear Optical Stokes Ellipsometry

Nonlinear optical Stokes ellipsometric (NOSE) microscopy was demonstrated for the analysis of collagen-rich biological tissues. NOSE is based on polarization-dependent second harmonic generation imaging. NOSE was used to access the molecular-level distribution of collagen fibril orientation relative to the local fiber axis at every position within the field of view. Fibril tilt-angle distribution was investigated by combining the NOSE measurements with ab initio calculations of the predicted molecular nonlinear optical response of a single collagen triple helix. The results were compared with results obtained previously by scanning electron microscopy, nuclear magnetic resonance imaging, and electron tomography. These results were enabled by first measuring the laboratory-frame Jones nonlinear susceptibility tensor, then extending to the local-frame tensor through pixel-by-pixel corrections based on local orientation.

Adaptive Remodeling of Achilles Tendon: A Multi-scale Computational Model

While it is known that musculotendon units adapt to their load environments, there is only a limited understanding of tendon adaptation in vivo. Here we develop a computational model of tendon remodeling based on the premise that mechanical damage and tenocyte-mediated tendon damage and repair processes modify the distribution of its collagen fiber lengths. We explain how these processes enable the tendon to geometrically adapt to its load conditions. Based on known biological processes, mechanical and strain-dependent proteolytic fiber damage are incorporated into our tendon model. Using a stochastic model of fiber repair, it is assumed that mechanically damaged fibers are repaired longer, whereas proteolytically damaged fibers are repaired shorter, relative to their pre-damage length. To study adaptation of tendon properties to applied load, our model musculotendon unit is a simplified three-component Hill-type model of the human Achilles-soleus unit. Our model results demonstrate that the geometric equilibrium state of the Achilles tendon can coincide with minimization of the total metabolic cost of muscle activation. The proposed tendon model independently predicts rates of collagen fiber turnover that are in general agreement with in vivo experimental measurements. While the computational model here only represents a first step in a new approach to understanding the complex process of tendon remodeling in vivo, given these findings, it appears likely that the proposed framework may itself provide a useful theoretical foundation for developing valuable qualitative and quantitative insights into tendon physiology and pathology.

Ring-Mesh Model of Proteoglycan Glycosaminoglycan Chains in Tendon based on Three-dimensional Reconstruction by Focused Ion Beam Scanning Electron Microscopy

Tendons are composed of collagen fibrils and proteoglycan predominantly consisting of decorin. Decorin is located on the d-band of collagen fibrils, and its glycosaminoglycan (GAG) chains have been observed between collagen fibrils with transmission electron microscopy. GAG chains have been proposed to interact with each other or with collagen fibrils, but its three-dimensional organization remains unclear. In this report, we used focused ion beam scanning electron microscopy to examine the three-dimensional organization of the GAG chain in the Achilles tendon of mature rats embedded in epoxy resin after staining with Cupromeronic blue, which specifically stains GAG chains. We used 250 serial back-scattered electron images of longitudinal sections with a 10-nm interval for reconstruction. Three-dimensional images revealed that GAG chains form a ring mesh-like structure with each ring surrounding a collagen fibril at the d-band and fusing with adjacent rings to form the planar network. This ring mesh model of GAG chains suggests that more than two GAG chains may interact with each other around collagen fibrils, which could provide new insights into the roles of GAG chains.

Piezoelectric properties of aligned collagen membranes

Electromechanical coupling, a phenomenon present in collagenous materials, may influence cell-extracellular matrix interactions. Here, electromechanical coupling has been investigated via piezoresponse force microscopy in transparent and opaque membranes consisting of helical-like arrays of aligned type I collagen fibrils self-assembled from acidic solution. Using atomic force microscopy, the transparent membrane was determined to contain fibrils having an average diameter of 76 ± 14 nm, whereas the opaque membrane comprised fibrils with an average diameter of 391 ± 99 nm. As the acidity of the membranes must be neutralized before they can serve as cell culture substrates, the structure and piezoelectric properties of the membranes were measured under ambient conditions before and after the neutralization process. A crimp structure (1.59 ± 0.37 µm in width) perpendicular to the fibril alignment became apparent in the transparent membrane when the pH was adjusted from acidic (pH = 2.5) to neutral (pH = 7) conditions. In addition, a 1.35-fold increase was observed in the amplitude of the shear piezoelectricity of the transparent membrane. The structure and piezoelectric properties of the opaque membrane were not significantly affected by the neutralization process. The results highlight the presence of an additional translational order in the transparent membrane in the direction perpendicular to the fibril alignment. The piezoelectric response of both membrane types was found to be an order of magnitude lower than that of collagen fibrils in rat tail tendon. This reduced response is attributed to less-ordered molecular assembly than is present in D-periodic collagen fibrils, as evidenced by the absence of D-periodicity in the membranes.

Role of moderate exercising on Achilles tendon collagen crimping patterns and proteoglycans

In this study, the morphological and morphometric changes in the collagen crimping pattern of Achilles tendon and metabolism/expression of tenocytes explanted from tendons of running (RUN) and sedentary (SED) rats were investigated to assess the effects of 12 weeks moderate running exercise. The number, the top angle width and the base length of each crimp in three different regions (proximal, central and distal) of RUN and SED tendons were measured with a polarized light microscope. The most significant morphometric differences in the crimps were detectable in the central region of the RUN tendons. In this region, crimps were fewer, larger and more flattened than those of other regions as a consequence of a functional adaptation of extracellular matrix to running, in order to increase tendon stiffness and force transmission efficiency. Conversely, the top angle width of the crimps reduced in proximal and distal regions of the RUN tendons, suggesting that these crimps might act as more reactive mechanical springs, able to store and improve the release of the stored strain energy in most loaded regions. Tenocytes explanted from Achilles tendons of both RUN and SED groups were cultured. Running influenced tenocytes which showed a significant increase in collagen type-I synthesis and proteoglycans production, suggesting enhancement of the loading transmission efficiency and facilitate inter-fibril and inter-fiber sliding.

Specialisation of extracellular matrix for function in tendons and ligaments

Tendons and ligaments are similar structures in terms of their composition, organisation and mechanical properties. The distinction between them stems from their anatomical location; tendons form a link between muscle and bone while ligaments link bones to bones. A range of overlapping functions can be assigned to tendon and ligaments and each structure has specific mechanical properties which appear to be suited for particular in vivo function. The extracellular matrix in tendon and ligament varies in accordance with function, providing appropriate mechanical properties. The most useful framework in which to consider extracellular matrix differences therefore is that of function rather than anatomical location. In this review we discuss what is known about the relationship between functional requirements, structural properties from molecular to gross level, cellular gene expression and matrix turnover. The relevance of this information is considered by reviewing clinical aspects of tendon and ligament repair and reconstructive procedures.

Tendon mechanobiology: experimental models require mathematical underpinning

Mathematical and computational modeling is in demand to help address current challenges in mechanobiology of musculoskeletal tissues. In particular for tendon, the high clinical importance of the tissue, the huge mechanical demands placed on it and its ability to adapt to these demands, require coupled, multiscale models incorporating complex geometrical and microstructural information as well as time-based descriptions of cellular activity and response.This review introduces the information sources required to develop such multiscale models. It covers tissue structure and biomechanics, cell biomechanics, the current understanding of tendon's ability in health and disease to update its properties and structure and the few already existing multiscale mechanobiological models of the tissue. Finally, a sketch is provided of what such models could achieve ideally, pointing out where experimental data and knowledge are still missing.

Repeated subrupture overload causes progression of nanoscaled discrete plasticity damage in tendon collagen fibrils

A critical feature of tendons and ligaments is their ability to resist rupture when overloaded, resulting in strains or sprains instead of ruptures. To treat these injuries more effectively, it is necessary to understand how overload affects the primary load-bearing elements of these tissues: collagen fibrils. We have investigated how repeated subrupture overload alters the collagen of tendons at the nanoscale. Using scanning electron microscopy to examine fibril morphology and hydrothermal isometric tension testing to look at molecular stability, we demonstrated that tendon collagen undergoes a progressive cascade of discrete plasticity damage when repeatedly overloaded. With successive overload cycles, fibrils develop an increasing number of kinks along their length. These kinks-discrete zones of plastic deformation known to contain denatured collagen molecules-are accompanied by a progressive and eventual total loss of D-banding along the surface of fibrils, indicating a loss of native molecular packing and further molecular denaturation. Thermal analysis of molecular stability showed that the destabilization of collagen molecules within fibrils is strongly related to the amount of strain energy dissipated by the tendon after yielding during tensile overload. These novel findings raise new questions about load transmission within tendons and their fibrils and about the interplay between crosslinking, strain-energy dissipation ability, and molecular denaturation within these structures.

Fibre bundles in the human extensor carpi ulnaris tendon are arranged in a spiral

The extensor carpi ulnaris musculotendinous unit has important agonist and antagonist action in wrist motion, including the dart-throwing action, and is a dynamic stabilizer of the distal radioulnar joint during forearm rotation. Despite its functional and clinical importance, little is known about its internal structure. Investigation of the ultrastructure of the human extensor carpi ulnaris (ECU) tendon was undertaken using plane polarized light microscopy and microcomputer tomography with 3D reconstruction. The study demonstrates that the tendon comprises fibre bundles (fascicles) approximately 0.1 mm in diameter that are arranged in a gradual spiral. The spiralling fibres make an angle of 8º to the longitudinal axis of the tendon. The spiral structure of the human ECU tendon has important biomechanical implications, allowing fascicular sliding during forearm rotation. The observed features may prevent injury.

Examining differences in local collagen fiber crimp frequency throughout mechanical testing in a developmental mouse supraspinatus tendon model

Crimp morphology is believed to be related to tendon mechanical behavior. While crimp has been extensively studied at slack or nondescript load conditions in tendon, few studies have examined crimp at specific, quantifiable loading conditions. Additionally, the effect of the number of cycles of preconditioning on collagen fiber crimp behavior has not been examined. Further, the dependence of collagen fiber crimp behavior on location and developmental age has not been examined in the supraspinatus tendon. Local collagen fiber crimp frequency is quantified throughout tensile mechanical testing using a flash freezing method immediately following the designated loading protocol. Samples are analyzed quantitatively using custom software and semi-quantitatively using a previously established method to validate the quantitative software. Local collagen fiber crimp frequency values are compared throughout the mechanical test to determine where collagen fiber frequency changed. Additionally, the effect of the number of preconditioning cycles is examined compared to the preload and toe-region frequencies to determine if increasing the number of preconditioning cycles affects crimp behavior. Changes in crimp frequency with age and location are also examined. Decreases in collagen fiber crimp frequency were found at the toe-region at all ages. Significant differences in collagen fiber crimp frequency were found between the preload and after preconditioning points at 28 days. No changes in collagen fiber crimp frequency were found between locations or between 10 and 28 days old. Local collagen fiber crimp frequency throughout mechanical testing in a postnatal developmental mouse SST model was measured. Results confirmed that the uncrimping of collagen fibers occurs primarily in the toe-region and may contribute to the tendon's nonlinear behavior. Additionally, results identified changes in collagen fiber crimp frequency with an increasing number of preconditioning cycles at 28 days, which may have implications on the measurement of mechanical properties and identifying a proper reference configuration.

Tenocyte contraction induces crimp formation in tendon-like tissue

Tendons are composed of longitudinally aligned collagen fibrils arranged in bundles with an undulating pattern, called crimp. The crimp structure is established during embryonic development and plays a vital role in the mechanical behaviour of tendon, acting as a shock-absorber during loading. However, the mechanism of crimp formation is unknown, partly because of the difficulties of studying tendon development in vivo. Here, we used a 3D cell culture system in which embryonic tendon fibroblasts synthesise a tendon-like construct comprised of collagen fibrils arranged in parallel bundles. Investigations using polarised light microscopy, scanning electron microscopy and fluorescence microscopy showed that tendon constructs contained a regular pattern of wavy collagen fibrils. Tensile testing indicated that this superstructure was a form of embryonic crimp producing a characteristic toe region in the stress-strain curves. Furthermore, contraction of tendon fibroblasts was the critical factor in the buckling of collagen fibrils during the formation of the crimp structure. Using these biological data, a finite element model was built that mimics the contraction of the tendon fibroblasts and monitors the response of the Extracellular matrix. The results show that the contraction of the fibroblasts is a sufficient mechanical impulse to build a planar wavy pattern. Furthermore, the value of crimp wavelength was determined by the mechanical properties of the collagen fibrils and inter-fibrillar matrix. Increasing fibril stiffness combined with constant matrix stiffness led to an increase in crimp wavelength. The data suggest a novel mechanism of crimp formation, and the finite element model indicates the minimum requirements to generate a crimp structure in embryonic tendon.