Cellulose biosynthesis and deposition in higher plants

Engineering strong man-made cellulosic fibers: a review of the wet spinning process based on cellulose nanofibrils

With the goal of sustainable development, manufacturing continuous high-performance fibers based on sustainable resources is an emerging research direction. However, compared to traditional synthetic fibers, plant fibers have limited length/diameter and uncontrollable natural defects, while regenerated cellulose fibers such as viscose and Lyocell suffer from inferior mechanical properties. Wet-spun fibers based on nanocelluloses especially cellulose nanofibrils (CNFs) offer superior mechanical performance since CNFs are the fundamental high-performance building blocks of plant cell walls. This review aims to summarize the progress of making CNF wet-spun fibers, emphasizing on the whole wet spinning process including spinning suspension preparation, spinning, coagulation, washing, drying and post-stretching steps. By establishing the relationships between the nano-scale assembling structure and the macroscopic changes in the CNF dope from gels to dried fibers, effective methods and strategies to improve the mechanical properties of the final fibers are analyzed and proposed. Based on this, the opportunities and challenges for potential industrial-scale production are discussed.

Cell wall as a barrier for protein extraction from tomato leaves: A biochemical study

Solanum lycopersicum (Tomato) leaves and stems are considered waste. Valorization of this waste can be achieved by for example the extraction of proteins. This prospect is promising but currently not feasible, since protein extraction yields from tomato leaves are low, amongst other due to the (physical) barrier formed by the plant cell walls. However, the molecular aspects of the relationship between cell wall properties and protein extractability from tomato leaves are currently not clear and thus objective of this study. To fill this knowledge gap the biochemical composition of plant cell walls was measured and related to protein extraction yields at different plant ages, leaf positions, and across different tomato accessions, including two Solanum lycopersicum cultivars and the wildtype species S. pimpinellifolium and S. pennellii. For all genotypes, protein extraction yields from tomato leaves were the highest in young tissues, with a decreasing trend towards older plant material. This decrease of protein extraction yield was accompanied by a significant increase of arabinose and galacturonic acid content and a decrease of galactose content in the cell walls of old-vs-young tissues. This resulted in strong negative correlations between protein extraction yield and the content of arabinose and galacturonic acid in the cell wall, and a positive correlation between the content of galactose and protein extraction yield. Overall, these results point to the importance of the pectin network on protein extractability, making pectin a potential breeding target for enhancing protein extractability from tomato leaves.

Enzymes in "Green" Synthetic Chemistry: Laccase and Lipase

Enzymes play an important role in numerous natural processes and are increasingly being utilized as environmentally friendly substitutes and alternatives to many common catalysts. Their essential advantages are high catalytic efficiency, substrate specificity, minimal formation of byproducts, and low energy demand. All of these benefits make enzymes highly desirable targets of academic research and industrial development. This review has the modest aim of briefly overviewing the classification, mechanism of action, basic kinetics and reaction condition effects that are common across all six enzyme classes. Special attention is devoted to immobilization strategies as the main tools to improve the resistance to environmental stress factors (temperature, pH and solvents) and prolong the catalytic lifecycle of these biocatalysts. The advantages and drawbacks of methods such as macromolecular crosslinking, solid scaffold carriers, entrapment, and surface modification (covalent and physical) are discussed and illustrated using numerous examples. Among the hundreds and possibly thousands of known and recently discovered enzymes, hydrolases and oxidoreductases are distinguished by their relative availability, stability, and wide use in synthetic applications, which include pharmaceutics, food and beverage treatments, environmental clean-up, and polymerizations. Two representatives of those groups-laccase (an oxidoreductase) and lipase (a hydrolase)-are discussed at length, including their structure, catalytic mechanism, and diverse usage. Objective representation of the current status and emerging trends are provided in the main conclusions.

Leaf defenses of subtropical deciduous and evergreen trees to varying intensities of herbivory

Generally, deciduous and evergreen trees coexist in subtropical forests, and both types of leaves are attacked by numerous insect herbivores. However, trees respond and defend themselves from herbivores in different ways, and these responses may vary between evergreen and deciduous species. We examined both the percentage of leaf area removed by herbivores as well as the percentage of leaves attacked by herbivores to evaluate leaf herbivore damage across 14 subtropical deciduous and evergreen tree species, and quantified plant defenses to varying intensities of herbivory. We found that there was no significant difference in mean percentage of leaf area removed between deciduous and evergreen species, yet a higher mean percentage of deciduous leaves were damaged compared to evergreen leaves (73.7% versus 60.2%). Although percent leaf area removed was mainly influenced by hemicellulose concentrations, there was some evidence that the ratio of non-structural carbohydrates:lignin and the concentration of tannins contribute to herbivory. We also highlight that leaf defenses to varying intensities of herbivory varied greatly among subtropical plant species and there was a stronger response for deciduous trees to leaf herbivore (e.g., increased nitrogen or lignin) attack than that of evergreen trees. This work elucidates how leaves respond to varying intensities of herbivory, and explores some of the underlying relationships between leaf traits and herbivore attack in subtropical forests.

Cellulose Synthase in Atacama Cyanobacteria and Bioethanol Production from Their Exopolysaccharides

Cyanobacteria produce exopolysaccharides (EPSs) as an adaptative mechanism against ultraviolet radiation and desiccation. Cellulose is present in the extracellular polymeric substance in some cyanobacteria genera and it has been proposed as a raw material for biofuel production. The goal of this work was to evaluate the cellulose presence in EPS of Atacama cyanobacteria strains and its use as an alternative and innovative biological source to produce bioethanol. The presence of cellulose was evaluated using techniques of molecular biology, bioinformatics, and electronic microscopy. The conserved motif D,D,D,35QXXRW, characteristic of processive β-glycosyltransferase in all cellulose-producing organisms, was identified in the genome of the LLA-10 strain. This is evidence that cellulose synthase in the LLA-10 strain is a functional enzyme. EPS from Atacama cyanobacteria was hydrolyzed by β-glucosidases (cellobiase and cellulase) and the released glucose was yeast-fermented to ethanol. Ethanol production reached 172.69 ± 0.02 mg ethanol/g EPS after 48 h of incubation. These results are the first step in the evaluation of EPS produced by native cyanobacteria isolated from northern Chile for future biotechnological applications such as the production of bioethanol.

A comprehensive overview of cotton genomics, biotechnology and molecular biological studies

Cotton is an irreplaceable economic crop currently domesticated in the human world for its extremely elongated fiber cells specialized in seed epidermis, which makes it of high research and application value. To date, numerous research on cotton has navigated various aspects, from multi-genome assembly, genome editing, mechanism of fiber development, metabolite biosynthesis, and analysis to genetic breeding. Genomic and 3D genomic studies reveal the origin of cotton species and the spatiotemporal asymmetric chromatin structure in fibers. Mature multiple genome editing systems, such as CRISPR/Cas9, Cas12 (Cpf1) and cytidine base editing (CBE), have been widely used in the study of candidate genes affecting fiber development. Based on this, the cotton fiber cell development network has been preliminarily drawn. Among them, the MYB-bHLH-WDR (MBW) transcription factor complex and IAA and BR signaling pathway regulate the initiation; various plant hormones, including ethylene, mediated regulatory network and membrane protein overlap fine-regulate elongation. Multistage transcription factors targeting CesA 4, 7, and 8 specifically dominate the whole process of secondary cell wall thickening. And fluorescently labeled cytoskeletal proteins can observe real-time dynamic changes in fiber development. Furthermore, research on the synthesis of cotton secondary metabolite gossypol, resistance to diseases and insect pests, plant architecture regulation, and seed oil utilization are all conducive to finding more high-quality breeding-related genes and subsequently facilitating the cultivation of better cotton varieties. This review summarizes the paramount research achievements in cotton molecular biology over the last few decades from the above aspects, thereby enabling us to conduct a status review on the current studies of cotton and provide strong theoretical support for the future direction.

Genome-wide analysis of the cellulose toolbox of Primulina eburnea, a calcium-rich vegetable

BACKGROUND

Human-guided crop domestication has lasted for more than 10,000 years. In terms of the domestication and breeding of vegetables, cellulose content in edible tissues is one of the most important traits. Primulina eburnea is a recently developed calcium-rich vegetable with a high soluble and bioavailable calcium content in its leaves. However, the high cellulose content in the leaves hampers the taste, and no research has been reported on the genetic basis of cellulose biosynthesis in this calcium-rich vegetable.

RESULTS

We identified 36 cellulose biosynthesis-involved genes belonging to eight gene families in the P. eburnea genome. The cellulose accumulated decreasingly throughout leaf development. Nineteen genes were considered core genes in cellulose biosynthesis, which were highly expressed in buds but lowly expressed in mature leaves. In the nitrogen fertilization experiment, exogenous nitrogen decreased the cellulose content in the buds. The expressing pattern of 14 genes were consistent with phenotypic variation in the nitrogen fertilization experiment, and thus they were proposed as cellulose toolbox genes.

CONCLUSIONS

The present study provides a strong basis for the subsequent functional research of cellulose biosynthesis-involved genes in P. eburnea, and provides a reference for breeding and/or engineering this calcium-rich vegetable with decreased leaf cellulose content to improve the taste.

Essential amino acids in the Plant-Conserved and Class-Specific Regions of cellulose synthases

The Plant-Conserved Region (P-CR) and the Class-Specific Region (CSR) are two plant-unique sequences in the catalytic core of cellulose synthases (CESAs) for which specific functions have not been established. Here, we used site-directed mutagenesis to replace amino acids and motifs within these sequences predicted to be essential for assembly and function of CESAs. We developed an in vivo method to determine the ability of mutated CesA1 transgenes to complement an Arabidopsis (Arabidopsis thaliana) temperature-sensitive root-swelling1 (rsw1) mutant. Replacement of a Cys residue in the CSR, which blocks dimerization in vitro, rendered the AtCesA1 transgene unable to complement the rsw1 mutation. Examination of the CSR sequences from 33 diverse angiosperm species showed domains of high-sequence conservation in a class-specific manner but with variation in the degrees of disorder, indicating a nonredundant role of the CSR structures in different CESA isoform classes. The Cys residue essential for dimerization was not always located in domains of intrinsic disorder. Expression of AtCesA1 transgene constructs, in which Pro417 and Arg453 were substituted for Ala or Lys in the coiled-coil of the P-CR, were also unable to complement the rsw1 mutation. Despite an expected role for Arg457 in trimerization of CESA proteins, AtCesA1 transgenes with Arg457Ala mutations were able to fully restore the wild-type phenotype in rsw1. Our data support that Cys662 within the CSR and Pro417 and Arg453 within the P-CR of Arabidopsis CESA1 are essential residues for functional synthase complex formation, but our data do not support a specific role for Arg457 in trimerization in native CESA complexes.

Effects of semi-deep water irrigation on hybrid indica rice lodging resistance

Recently, rice-aquatic animal integrated farming (RAAIF) has grown rapidly in China due to its favorable benefits and the lower application of pesticides and fertilizers. However, rice lodging occurs frequently under RAAIF, which restricts rice yield. We assumed that semi-deep water irrigation may cause weaker rice-lodging resistance since it is the most significant environmental factor for RAAIF that distinguishes it from rice monoculture. To investigate the response of rice stem lodging resistance to semi-deep water irrigation and its mechanism, three irrigation management modes, namely the typical high-yield irrigation model that is mainly based on swallow and wetting (CK), semi-deep water irrigation from the late tillering stage to the jointing stage (SDI1), and semi-deep water irrigation from the jointing stage to the middle grain-filling stage (SDI2), were conducted using three hybrid indica rice varieties: Shenliangyou136 (SLY136), Huiliangyousimiao (HLYSM), and Wanxiangyou982 (WXY982). Mechanics analysis indicated that the bending moment by the whole plant (WP) and the breaking strength (M) were both decreased by semi-deep water irrigation when compared with CK, while M presented a larger decreasing amplitude than WP, which induced the increased lodging index (LI) of rice, for all the tested varieties. SLY136 and HLYSM were affected more strongly by SDI1, whereas WXY982 was affected more strongly by SDI2. Significant weaker breaking force under two semi-deep water irrigation modes contributed to the decreased M relative to CK. Morphology results showed that semi-deep water irrigation reduced the thickness of mechanical tissues, sclerenchyma cells, and parenchyma cells; reduced the number of vascular bundles; and caused a looser arrangement, inducing the lower fullness of the rice basal internode. Decreased accumulation of lignin and cellulose was also linked to the weaker breaking force of the basal internode under semi-deep water irrigation, which was verified by correlation analysis. WXY982 had obvious lower structural carbohydrates content under semi-deep water irrigation than the other two varieties and thus showed worse breaking force and LI. In conclusion, the worse mechanical strength of the rice basal internode under semi-deep water irrigation was closely associated with weaker vascular bundle development and suppressed structural carbohydrate accumulation, and the decreasing degree of lodging resistance varied between rice varieties and semi-deep water irrigation periods.

Brittle culm 3, encoding a cellulose synthase subunit 5, is required for cell wall biosynthesis in barley (Hordeum vulgare L.)

The cell wall plays an important role in plant mechanical strength. Cellulose is the major component of plant cell walls and provides the most abundant renewable biomass resource for biofuels on earth. Mutational analysis showed that cellulose synthase (CESA) genes are critical in cell wall biosynthesis in cereal crops like rice. However, their role has not been fully elucidated in barley. In this study, we isolated a brittle culm mutant brittle culm 3 (bc3) derived from Yangnongpi 5 ethyl methanesulfonate (EMS) mutagenesis in barley. The bc3 mutants exhibited reduced mechanical strength of the culms due to impaired thickening of the sclerenchyma cell wall and reduced cellulose and hemicellulose content in the culms. Genetic analysis and map-based cloning revealed that the bc3 mutant was controlled by a single recessive gene and harbored a point mutation in the HvCESA5 gene, generating a premature stop codon near the N-terminal of the protein. Quantitative real-time PCR (qRT-PCR) analysis showed that the HvCESA5 gene is predominantly expressed in the culms and co-expressed with HvCESA4 and HvCESA8, consistent with the brittle culm phenotype of the bc3 mutant. These results indicate that the truncated HvCESA5 affects cell wall biosynthesis leading to a brittle culm phenotype. Our findings provide evidence for the important role of HvCESA5 in cell wall biosynthesis pathway and could be a potential target to modify cell wall in barley.

Metabolic engineering to enhance the accumulation of bioactive flavonoids licochalcone A and echinatin in Glycyrrhiza inflata (Licorice) hairy roots

Echinatin and licochalcone A (LCA) are valuable chalcones preferentially accumulated in roots and rhizomes of licorice (Glycyrrhiza inflata). The licorice chalcones (licochalcones) are valued for their anti-inflammatory, antimicrobial, and antioxidant properties and have been widely used in cosmetic, pharmaceutical, and food industries. However, echinatin and LCA are accumulated in low quantities, and the biosynthesis and regulation of licochalcones have not been fully elucidated. In this study, we explored the potential of a R2R3-MYB transcription factor (TF) AtMYB12, a known regulator of flavonoid biosynthesis in Arabidopsis, for metabolic engineering of the bioactive flavonoids in G. inflata hairy roots. Overexpression of AtMYB12 in the hairy roots greatly enhanced the production of total flavonoids (threefold), echinatin (twofold), and LCA (fivefold). RNA-seq analysis of AtMYB12-overexpressing hairy roots revealed that expression of phenylpropanoid/flavonoid pathway genes, such as phenylalanine ammonia-lyase (PAL), chalcone synthase (CHS), and flavanone 3'-hydroxylase (F3'H), is significantly induced compared to the control. Transient promoter activity assay indicated that AtMYB12 activates the GiCHS1 promoter in plant cells, and mutation to the MYB-binding motif in the GiCHS1 promoter abolished activation. In addition, transcriptomic analysis revealed that AtMYB12 overexpression reprograms carbohydrate metabolism likely to increase carbon flux into flavonoid biosynthesis. Further, AtMYB12 activated the biotic defense pathways possibly by activating the salicylic acid and jasmonic acid signaling, as well as by upregulating WRKY TFs. The transcriptome of AtMYB12-overexpressing hairy roots serves as a valuable source in the identification of potential candidate genes involved in LCA biosynthesis. Taken together, our findings suggest that AtMYB12 is an effective gene for metabolic engineering of valuable bioactive flavonoids in plants.

A Golgi-localized glycosyltransferase, OsGT14;1, is required for growth of both roots and shoots in rice

Glycosyltransferases (GTs) form a large family in plants and are important enzymes for the synthesis of various polysaccharides, but only a few members have been functionally characterized. Here, through mutant screening with gene mapping, we found that an Oryza sativa (rice) mutant with a short-root phenotype was caused by a frame-shift mutation of a gene (OsGT14;1) belonging to the glycosyltransferase gene family 14. Further analysis indicated that the mutant also had a brittle culm and produced lower grain yield compared with wild-type rice, but the roots showed similar root structure and function in terms of the uptake of mineral nutrients. OsGT14;1 was broadly expressed in all organs throughout the entire growth period, with a relatively high expression in the roots, stems, node I and husk. Furthermore, OsGT14;1 was expressed in all tissues of these organs. Subcellular observation revealed that OsGT14;1 encoded a Golgi-localized protein. Mutation of OsGT14;1 resulted in decreased cellulose content and increased hemicellulose, but did not alter pectin in the cell wall of roots and shoots. The knockout of OsGT14;1 did not affect the tolerance to toxic mineral elements, including Al, As, Cd and salt stress, but did increase the sensitivity to low pH. Taken together, OsGT14;1 located at the Golgi is required for growth of both roots and shoots in rice through affecting cellulose synthesis.

Species-Specific Gene Expansion of the Cellulose synthase Gene Superfamily in the Orchidaceae Family and Functional Divergence of Mannan Synthesis-Related Genes in Dendrobium officinale

Plant Cellulose synthase genes constitute a supergene family that includes the Cellulose synthase (CesA) family and nine Cellulose synthase-like (Csl) families, the members of which are widely involved in the biosynthesis of cellulose and hemicellulose. However, little is known about the Cellulose synthase superfamily in the family Orchidaceae, one of the largest families of angiosperms. In the present study, we identified and systematically analyzed the CesA/Csl family members in three fully sequenced Orchidaceae species, i.e., Dendrobium officinale, Phalaenopsis equestris, and Apostasia shenzhenica. A total of 125 Cellulose synthase superfamily genes were identified in the three orchid species and classified into one CesA family and six Csl families: CslA, CslC, CslD, CslE, CslG, and CslH according to phylogenetic analysis involving nine representative plant species. We found species-specific expansion of certain gene families, such as the CslAs in D. officinale (19 members). The CesA/Csl families exhibited sequence divergence and conservation in terms of gene structure, phylogeny, and deduced protein sequence, indicating multiple origins via different evolutionary processes. The distribution of the DofCesA/DofCsl genes was investigated, and 14 tandemly duplicated genes were detected, implying that the expansion of DofCesA/DofCsl genes may have originated via gene duplication. Furthermore, the expression profiles of the DofCesA/DofCsl genes were investigated using transcriptome sequencing and quantitative Real-time PCR (qRT-PCR) analysis, which revealed functional divergence in different tissues and during different developmental stages of D. officinale. Three DofCesAs were highly expressed in the flower, whereas DofCslD and DofCslC family genes exhibited low expression levels in all tissues and at all developmental stages. The 19 DofCslAs were differentially expressed in the D. officinale stems at different developmental stages, among which six DofCslAs were expressed at low levels or not at all. Notably, two DofCslAs (DofCslA14 and DofCslA15) showed significantly high expression in the stems of D. officinale, indicating a vital role in mannan synthesis. These results indicate the functional redundancy and specialization of DofCslAs with respect to polysaccharide accumulation. In conclusion, our results provide insights into the evolution, structure, and expression patterns of CesA/Csl genes and provide a foundation for further gene functional analysis in Orchidaceae and other plant species.

Cellulose accumulation mediated by PbrCSLD5, a cellulose synthase-like protein, results in cessation of pollen tube growth in Pyrus bretschneideri

Cellulose, a key component of the cell wall, plays an important role in maintaining the growth of pollen tubes. However, the molecular mechanism of cellulose participating in the cessation of pear pollen tube growth remains unclear. Here, we reported that at 15 h post-cultured (HPC), the slow-growth pear pollen tubes showed thickened cell walls and cellulose accumulation in the inner wall. Transcriptome data and quantitative real-time PCR analysis showed that PbrCSLD5, a cellulose synthesis-like gene, was highly expressed in the 15 HPC pear pollen tubes. Knockdown of PbrCSLD5 caused a decrease in cellulose content in pear pollen tubes. Moreover, PbrCSLD5 overexpression in Arabidopsis resulted in the accumulation of cellulose and disruption of normal pollen tube growth. Transcription factor PbrMADS52 was found to bind to the promoter of PbrCSLD5 and enhanced its expression. Our results suggested that the PbrMADS52-PbrCSLD5 signaling pathway led to increased cellulose content in the pear pollen tube cell wall, thereby inhibiting pollen tube growth. These results provided new insights into the regulation of pollen tube growth.

Molecular studies of cellulose synthase supercomplex from cotton fiber reveal its unique biochemical properties

Cotton fiber is a highly elongated and thickened single cell that produces large quantities of cellulose, which is synthesized and assembled into cell wall microfibrils by the cellulose synthase complex (CSC). In this study, we report that in cotton (Gossypium hirsutum) fibers harvested during secondary cell wall (SCW) synthesis, GhCesA 4, 7, and 8 assembled into heteromers in a previously uncharacterized 36-mer-like cellulose synthase supercomplex (CSS). This super CSC was observed in samples prepared using cotton fiber cells harvested during the SCW synthesis period but not from cotton stem tissue or any samples obtained from Arabidopsis. Knock-out of any of GhCesA 4, 7, and 8 resulted in the disappearance of the CSS and the production of fiber cells with no SCW thickening. Cotton fiber CSS showed significantly higher enzyme activity than samples prepared from knock-out cotton lines. We found that the microfibrils from the SCW of wild-type cotton fibers may contain 72 glucan chains in a bundle, unlike other plant materials studied. GhCesA4, 7, and 8 restored both the dwarf and reduced vascular bundle phenotypes of their orthologous Arabidopsis mutants, potentially by reforming the CSC hexamers. Genetic complementation was not observed when non-orthologous CesA genes were used, indicating that each of the three subunits is indispensable for CSC formation and for full cellulose synthase function. Characterization of cotton CSS will increase our understanding of the regulation of SCW biosynthesis.

Down-regulation of OsMYB103L distinctively alters beta-1,4-glucan polymerization and cellulose microfibers assembly for enhanced biomass enzymatic saccharification in rice

BACKGROUND

As a major component of plant cell walls, cellulose provides the most abundant biomass resource convertible for biofuels. Since cellulose crystallinity and polymerization have been characterized as two major features accounting for lignocellulose recalcitrance against biomass enzymatic saccharification, genetic engineering of cellulose biosynthesis is increasingly considered as a promising solution in bioenergy crops. Although several transcription factors have been identified to regulate cellulose biosynthesis and plant cell wall formation, much remains unknown about its potential roles for genetic improvement of lignocellulose recalcitrance.

RESULTS

In this study, we identified a novel rice mutant (Osfc9/myb103) encoded a R2R3-MYB transcription factor, and meanwhile generated OsMYB103L-RNAi-silenced transgenic lines. We determined significantly reduced cellulose levels with other major wall polymers (hemicellulose, lignin) slightly altered in mature rice straws of the myb103 mutant and RNAi line, compared to their wild type (NPB). Notably, the rice mutant and RNAi line were of significantly reduced cellulose features (crystalline index/CrI, degree of polymerization/DP) and distinct cellulose nanofibers assembly. These alterations consequently improved lignocellulose recalcitrance for significantly enhanced biomass enzymatic saccharification by 10-28% at p < 0.01 levels (n = 3) after liquid hot water and chemical (1% H₂SO₄, 1% NaOH) pretreatments with mature rice straws. In addition, integrated RNA sequencing with DNA affinity purification sequencing (DAP-seq) analyses revealed that the OsMYB103L might specifically mediate cellulose biosynthesis and deposition by regulating OsCesAs and other genes associated with microfibril assembly.

CONCLUSIONS

This study has demonstrated that down-regulation of OsMYB103L could specifically improve cellulose features and cellulose nanofibers assembly to significantly enhance biomass enzymatic saccharification under green-like and mild chemical pretreatments in rice. It has not only indicated a powerful strategy for genetic modification of plant cell walls in bioenergy crops, but also provided insights into transcriptional regulation of cellulose biosynthesis in plants.

GhMYB7 promotes secondary wall cellulose deposition in cotton fibres by regulating GhCesA gene expression through three distinct cis-elements

Cotton fibre is the most important source for natural textiles. The secondary cell walls (SCWs) of mature cotton fibres contain the highest proportion of cellulose content (> 90%) in any plant. The onset and progression of SCW cellulose synthesis need to be tightly controlled to balance fibre elongation and cell wall deposition. However, regulatory mechanisms that control cellulose synthesis during cotton fibre growth remain elusive. Here, we conducted genetic and functional analyses demonstrating that the R2R3-MYB GhMYB7 controls cotton fibre cellulose synthesis. Overexpression of GhMYB7 in cotton sped up SCW cellulose biosynthesis in fibre cells, and led to shorter fibres with thicker walls. By contrast, RNA interference (RNAi) silencing of GhMYB7 delayed fibre SCW cellulose synthesis and resulted in elongated fibres with thinner walls. Furthermore, we demonstrated that GhMYB7 regulated cotton fibre SCW cellulose synthases by directly binding to three distinct cis-elements in the respective GhCesA4, GhCesA7 and GhCesA8 promoters. We found that this regulatory mechanism of cellulose synthesis was 'hi-jacked' also by other GhMYBs. Together, our findings uncover a hitherto-unknown mechanism that cotton fibre employs to regulate SCW cellulose synthesis. Our results also provide a strategy for genetic improvement of SCW thickness of cotton fibre.

Cell wall associated immunity in plants

The plant cell wall is the first physical and defensive barrier against pathogens. The plant cell wall usually undergoes dynamic remodeling as an immune response to prevent infection by pathogens. In this review, we summarize advances on relationship between cell wall and immunity in plants. In particular, we outline current progresses regarding the regulation of the cell wall components, including cellulose, hemicellulose, pectin and lignin, on plant disease resistance. We also discuss the impacts of cell wall-derived cellodextrin, oligogalacturonic acid and xyloglucan/xylan oligosaccharides as potent elicitors or signal molecules to trigger plant immune response. We further propose future studies on dissecting the molecular regulation of cell wall on plant immunity, which have potentials in practical application of crop breeding aiming at improvement of plant disease resistance.

Tailoring renewable materials via plant biotechnology

Plants inherently display a rich diversity in cell wall chemistry, as they synthesize an array of polysaccharides along with lignin, a polyphenolic that can vary dramatically in subunit composition and interunit linkage complexity. These same cell wall chemical constituents play essential roles in our society, having been isolated by a variety of evolving industrial processes and employed in the production of an array of commodity products to which humans are reliant. However, these polymers are inherently synthesized and intricately packaged into complex structures that facilitate plant survival and adaptation to local biogeoclimatic regions and stresses, not for ease of deconstruction and commercial product development. Herein, we describe evolving techniques and strategies for altering the metabolic pathways related to plant cell wall biosynthesis, and highlight the resulting impact on chemistry, architecture, and polymer interactions. Furthermore, this review illustrates how these unique targeted cell wall modifications could significantly extend the number, diversity, and value of products generated in existing and emerging biorefineries. These modifications can further target the ability for processing of engineered wood into advanced high performance materials. In doing so, we attempt to illuminate the complex connection on how polymer chemistry and structure can be tailored to advance renewable material applications, using all the chemical constituents of plant-derived biopolymers, including pectins, hemicelluloses, cellulose, and lignins.

Structural and Nutritional Peculiarities Related to Lifespan Differences on Four Lopesia Induced Bivalve-Shaped Galls on the Single Super-Host Mimosa gemmulata

Super-host plants are elegant models to evaluate the peculiarities of gall structural and nutritional profiles due to the stimuli of distinct gall inducers in temporal and spatial perspectives. Galls induced by congeneric insects, Lopesia spp. (Diptera, Cecidomyiidae) on the same host plant, Mimosa gemmulata Barneby (Fabaceae) were analyzed to estimate if variations of 1 or 2 months in gall lifespans may result in differences over the accumulation of nutritional resources, and their compartmentalization both in cell walls and protoplasm. Mimosa gemmulata hosts four Lopesia-induced galls: the lenticular bivalve-shaped gall (LG) with a 2-month life cycle, the brown lanceolate bivalve-shaped gall (BLG) and the green lanceolate bivalve-shaped gall (GLG) with 3 month-life cycles, and the globoid bivalve-shaped gall (GG) with a 4 month-life cycle. The comparisons among the four Lopesia galls, using anatomical, histometric, histochemical, and immunocytochemical tools, have demonstrated that the longest lifespan of the GG related to its highest increment in structural and nutritional traits compared with the LG, GLG, and BLG. The differences among the tissue stratification and cell wall thickness of the galls with the 2-month and the 3-month lifespans were subtle. However, the GG had thicker cell walls and higher stratification of the common storage tissue, schlerenchymatic layers and typical nutritive tissue than the other three gall morphospecies. The higher tissue thickness of the GG was followed by the formation of a bidirectional gradient of carbohydrates in the protoplasm, and the detection of xyloglucans in cell walls. Current data supported the presumption that the longest the lifespan, the highest the impact over the structural and nutritional metabolism of the Lopesia galls associated to M. gemmulata.

Disassembly of TEMPO-Oxidized Cellulose Fibers: Intersheet and Interchain Interactions in the Isolation of Nanofibers and Unitary Chains

Cellulose disassembly is an important issue in designing nanostructures using cellulose-based materials. In this work, we present a combination of experimental and theoretical study addressing the disassembly of cellulose nanofibrils. Through 2,2,6,6-tetramethylpiperidine-1-oxyl-mediated oxidation processes, combined with atomic force microscopy results, we show the formation of nanofibers with diameters corresponding to that of a single-cellulose polymer chain. The formation of these polymer chains is controlled by repulsive electrostatic interactions between the oxidized chains. Further, first-principles calculations have been performed in order to provide an atomistic understanding of the cellulose disassembling processes, focusing on the balance between the interchain (IC) and intersheet (IS) interactions upon oxidation. First, we analyze these interactions in pristine systems, where we found the IS interaction to be stronger than the IC interaction. In the oxidized systems, we have considered the formation of (charged) carboxylate groups along the inner sites of elementary fibrils. We show a net charge concentration on the carboxylate groups, supporting the emergence of repulsive electrostatic interactions between the cellulose nanofibers. Indeed, our total energy results show that the weakening of the binding strength between the fibrils is proportional to the concentration and net charge density of the carboxylate group. Moreover, by comparing the IC and IS binding energies, we found that most of the disassembly processes should take place by breaking the IC O-H···O hydrogen bond interactions and thus supporting the experimental observation of single- and double-cellulose polymer chains.

A small molecule inhibits cell elongation by modulating cell wall polysaccharide composition in Arabidopsis

•

This study identified a small molecule for modification of cell wall composition.

•

The molecule can be used as a tool to study cell wall remodeling during plant growth.

The plant primary cell wall is comprised of pectin, cellulose and hemicelluloses, whose dynamic interactions play essential roles in plant cell elongation. Through a chemical genetics screening, we identified a small molecule, named cell wall modulator (CWM), which disrupted cell growth and deformed cell shape in etiolated Arabidopsis hypocotyl. A pectin defective mutant qua2, identified from screening an Arabidopsis EMS mutant library, showed a reduced sensitivity to CWM treatment. On the other hand, pectinase treatment suppressed the CWM induced phenotype. Furthermore, cellulose content was decreased in response to CWM treatment, while the cellulose synthesis mutants ixr1 and ixr2 were hypersensitive to CWM. Together, the study identified a small molecule CWM that induced a modification of the cell wall in elongating cells, likely through interfering with pectin modification. This molecule may be used as a tool to study cell wall remodeling during plant growth.

Genome-Wide Analysis of the COBRA-Like Gene Family Supports Gene Expansion through Whole-Genome Duplication in Soybean (Glycine max)

The COBRA-like (COBL) gene family has been associated with the regulation of cell wall expansion and cellulose deposition. COBL mutants result in reduced levels and disorganized deposition of cellulose causing defects in the cell wall and inhibiting plant development. In this study, we report the identification of 24 COBL genes (GmCOBL) in the soybean genome. Phylogenetic analysis revealed that the COBL proteins are divided into two groups, which differ by about 170 amino acids in the N-terminal region. The GmCOBL genes were heterogeneously distributed in 14 of the 20 soybean chromosomes. This study showed that segmental duplication has contributed significantly to the expansion of the COBL family in soybean during all Glycine-specific whole-genome duplication events. The expression profile revealed that the expression of the paralogous genes is highly variable between organs and tissues of the plant. Only 20% of the paralogous gene pairs showed similar expression patterns. The high expression levels of some GmCOBLs suggest they are likely essential for regulating cell expansion during the whole soybean life cycle. Our comprehensive overview of the COBL gene family in soybean provides useful information for further understanding the evolution and diversification of COBL genes in soybean.

Xylan Is Critical for Proper Bundling and Alignment of Cellulose Microfibrils in Plant Secondary Cell Walls

Plant biomass represents an abundant and increasingly important natural resource and it mainly consists of a number of cell types that have undergone extensive secondary cell wall (SCW) formation. These cell types are abundant in the stems of Arabidopsis, a well-studied model system for hardwood, the wood of eudicot plants. The main constituents of hardwood include cellulose, lignin, and xylan, the latter in the form of glucuronoxylan (GX). The binding of GX to cellulose in the eudicot SCW represents one of the best-understood molecular interactions within plant cell walls. The evenly spaced acetylation and 4-O-methyl glucuronic acid (MeGlcA) substitutions of the xylan polymer backbone facilitates binding in a linear two-fold screw conformation to the hydrophilic side of cellulose and signifies a high level of molecular specificity. However, the wider implications of GX-cellulose interactions for cellulose network formation and SCW architecture have remained less explored. In this study, we seek to expand our knowledge on this by characterizing the cellulose microfibril organization in three well-characterized GX mutants. The selected mutants display a range of GX deficiency from mild to severe, with findings indicating even the weakest mutant having significant perturbations of the cellulose network, as visualized by both scanning electron microscopy (SEM) and atomic force microscopy (AFM). We show by image analysis that microfibril width is increased by as much as three times in the severe mutants compared to the wild type and that the degree of directional dispersion of the fibrils is approximately doubled in all the three mutants. Further, we find that these changes correlate with both altered nanomechanical properties of the SCW, as observed by AFM, and with increases in enzymatic hydrolysis. Results from this study indicate the critical role that normal GX composition has on cellulose bundle formation and cellulose organization as a whole within the SCWs.

The genome of kenaf (Hibiscus cannabinus L.) provides insights into bast fibre and leaf shape biogenesis

Kenaf is an annual crop that is widely cultivated as a source of bast (phloem) fibres, the phytoremediation of heavy metal-contaminated farmlands and textile-relevant compounds. Leaf shape played a unique role in kenaf improvement, due to the inheritance as a single locus and the association with fibre development in typical lobed-leaf varieties. Here we report a high-quality genome assembly and annotation for var. 'Fuhong 952' with 1078 Mbp genome and 66 004 protein-coding genes integrating single-molecule real-time sequencing, a high-density genetic map and high-throughput chromosome conformation capture techniques. Gene mapping assists the identification of a homeobox transcription factor LATE MERISTEM IDENTITY 1 (HcLMI1) gene controlling lobed-leaf. Virus-induced gene silencing (VIGS) of HcLMI1 in a lobed-leaf variety was critical to induce round (entire)-like leaf formation. Candidate genes involved in cell wall formation were found in quantitative trait loci (QTL) for fibre yield and quality-related traits. Comparative genomic and transcriptome analyses revealed key genes involved in bast fibre formation, among which there are twice as many cellulose synthase A (CesA) genes due to a recent whole-genome duplication after divergence from Gossypium. Population genomic analysis showed two recent population bottlenecks in kenaf, suggesting domestication and improvement process have led to an increase in fibre biogenesis and yield. This chromosome-scale genome provides an important framework and toolkit for sequence-directed genetic improvement of fibre crops.

Comparative Transcriptome Analysis Reveals Stem Secondary Growth of Grafted Rosa rugosa 'Rosea' Scion and R. multiflora 'Innermis' Rootstock

Grafted plant is a chimeric organism formed by the connection of scion and rootstock through stems, so stem growth and development become one of the important factors to affect grafted plant state. However, information regarding the molecular responses of stems secondary growth after grafting is limited. A grafted Rosa plant, with R. rugosa 'Rosea' as the scion (Rr_scion) grafted onto R. multiflora 'Innermis' as the stock (Rm_stock), has been shown to significantly improve stem thickness. To elucidate the molecular mechanisms of stem secondary growth in grafted plant, a genome-wide transcription analysis was performed using an RNA sequence (RNA-seq) method between the scion and rootstock. Comparing ungrafted R. rugosa 'Rosea' (Rr) and R. multiflora 'Innermis' (Rm) plants, there were much more differentially expressed genes (DEGs) identified in Rr_scion (6887) than Rm_stock (229). Functional annotations revealed that DEGs in Rr_scion are involved in two Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways: the phenylpropanoid biosynthesis metabolism and plant hormone signal transduction, whereas DEGs in Rm_stock were associated with starch and sucrose metabolism pathway. Moreover, different kinds of signal transduction-related DEGs, e.g., receptor-like serine/threonine protein kinases (RLKs), transcription factor (TF), and transporters, were identified and could affect the stem secondary growth of both the scion and rootstock. This work provided new information regarding the underlying molecular mechanism between scion and rootstock after grafting.

Altered sucrose metabolism and plant growth in transgenic Populus tomentosa with altered sucrose synthase PtSS3

Improvement of wood quality is an important focus of forest genetics and breeding research. Sucrose synthase (SS) catalyzes the reaction of sucrose and uridine diphosphate into uridine diphosphate glucose and fructose. It is a key enzyme involved in cell wall formation during secondary growth by providing the UDP-Glucose substrate for cellulose biosynthesis. In this study, we isolated the single-copy gene PtSS3 from the SS gene family of Populus tomentosa and analyzed its structure. To identify its function in secondary growth, we generated 19 transgenic lines of P. tomentosa using PtSS3 overexpression (OE) and artificial microRNA (amiRNA) constructs. We also performed comprehensive analyses of the transgenic P. tomentosa plants, including phenotypic analyses, quantitative real-time PCR, enzyme activity assays and sugar metabolism. We found significantly higher PtSS3 enzyme activity, fructose, and glucose levels and significantly lower sucrose levels in the stems and leaves of OE-PtSS3 plants. The opposite trend was observed in the amiRNA-PtSS3 lines. Gene expression analyses showed that PtSS3 transcript levels in stems and leaves were up-regulated in the OE-PtSS3 lines and down-regulated in the amiRNA-PtSS3 lines, and the OE-PtSS3 plants grew taller than the wild-type and amiRNA-PtSS3 plants. These findings indicate that PtSS3 plays an important role in sucrose metabolism and growth of trees.

Expression profiles of cell-wall related genes vary broadly between two common maize inbreds during stem development

Background

The cellular machinery for cell wall synthesis and metabolism is encoded by members of large multi-gene families. Maize is both a genetic model for grass species and a potential source of lignocellulosic biomass from crop residues. Genetic improvement of maize for its utility as a bioenergy feedstock depends on identification of the specific gene family members expressed during secondary wall development in stems.

Results

High-throughput sequencing of transcripts expressed in developing rind tissues of stem internodes provided a comprehensive inventory of cell wall-related genes in maize (Zea mays, cultivar B73). Of 1239 of these genes, 854 were expressed among the internodes at ≥95 reads per 20 M, and 693 of them at ≥500 reads per 20 M. Grasses have cell wall compositions distinct from non-commelinid species; only one-quarter of maize cell wall-related genes expressed in stems were putatively orthologous with those of the eudicot Arabidopsis. Using a slope-metric algorithm, five distinct patterns for sub-sets of co-expressed genes were defined across a time course of stem development. For the subset of genes associated with secondary wall formation, fifteen sequence motifs were found in promoter regions. The same members of gene families were often expressed in two maize inbreds, B73 and Mo17, but levels of gene expression between them varied, with 30% of all genes exhibiting at least a 5-fold difference at any stage. Although presence-absence and copy-number variation might account for much of these differences, fold-changes of expression of a CADa and a FLA11 gene were attributed to polymorphisms in promoter response elements.

Conclusions

Large genetic variation in maize as a species precludes the extrapolation of cell wall-related gene expression networks even from one common inbred line to another. Elucidation of genotype-specific expression patterns and their regulatory controls will be needed for association panels of inbreds and landraces to fully exploit genetic variation in maize and other bioenergy grass species.

Review: Plant cell wall biochemical omics: The high-throughput biochemistry for polysaccharide biosynthesis

Progress in the functional biochemical analysis of plant glycosyltransferases (GTs) has been slow because plant GTs are generally membrane proteins, operate as part of larger, multimeric complexes, and utilize a vast complexity of substrate acceptors. Therefore, the field would benefit from development of adequate high throughput expression as well as product detection and characterization techniques. Here we review current approaches to tackle such obstacles and suggest a new path forward: nucleic acid programmable protein arrays (NAPPA) with liquid sample desorption ionization (LS-DESI-MS) mass spectrometry. NAPPA utilizes in vitro transcription and translation to produce epitope-tagged fusion proteins from cloned GT cDNAs. LS-DESI is a soft ionization technique that allows rapid and sensitive MS-based product characterization in situ. Coupling both approaches provides the opportunity to examine individual GT functions as well as protein-protein interactions. Furthermore, advances in automated oligosaccharide synthesis and lipid nanodisc technology should allow testing of plant GT activity in presence of numerous substrate acceptors and lipid environments in a high throughput fashion. Thus, NAPPA-DESI-MS has great potential to make headway in biochemical characterization of the large number of plant GTs.

Convergent evolution of hetero-oligomeric cellulose synthesis complexes in mosses and seed plants

In seed plants, cellulose is synthesized by rosette-shaped cellulose synthesis complexes (CSCs) that are obligate hetero-oligomeric, comprising three non-interchangeable cellulose synthase (CESA) isoforms. The moss Physcomitrella patens has rosette CSCs and seven CESAs, but its common ancestor with seed plants had rosette CSCs and a single CESA gene. Therefore, if P. patens CSCs are hetero-oligomeric, then CSCs of this type evolved convergently in mosses and seed plants. Previous gene knockout and promoter swap experiments showed that PpCESAs from class A (PpCESA3 and PpCESA8) and class B (PpCESA6 and PpCESA7) have non-redundant functions in secondary cell wall cellulose deposition in leaf midribs, whereas the two members of each class are redundant. Based on these observations, we proposed the hypothesis that the secondary class A and class B PpCESAs associate to form hetero-oligomeric CSCs. Here we show that transcription of secondary class A PpCESAs is reduced when secondary class B PpCESAs are knocked out and vice versa, as expected for genes encoding isoforms that occupy distinct positions within the same CSC. The class A and class B isoforms co-accumulate in developing gametophores and co-immunoprecipitate, suggesting that they interact to form a complex in planta. Finally, secondary PpCESAs interact with each other, whereas three of four fail to self-interact when expressed in two different heterologous systems. These results are consistent with the hypothesis that obligate hetero-oligomeric CSCs evolved independently in mosses and seed plants and we propose the constructive neutral evolution hypothesis as a plausible explanation for convergent evolution of hetero-oligomeric CSCs.

Organellar carbon metabolism is coordinated with distinct developmental phases of secondary xylem

Subcellular compartmentation of plant biosynthetic pathways in the mitochondria and plastids requires coordinated regulation of nuclear encoded genes, and the role of these genes has been largely ignored by wood researchers. In this study, we constructed a targeted systems genetics coexpression network of xylogenesis in Eucalyptus using plastid and mitochondrial carbon metabolic genes and compared the resulting clusters to the aspen xylem developmental series. The constructed network clusters reveal the organization of transcriptional modules regulating subcellular metabolic functions in plastids and mitochondria. Overlapping genes between the plastid and mitochondrial networks implicate the common transcriptional regulation of carbon metabolism during xylem secondary growth. We show that the central processes of organellar carbon metabolism are distinctly coordinated across the developmental stages of wood formation and are specifically associated with primary growth and secondary cell wall deposition. We also demonstrate that, during xylogenesis, plastid-targeted carbon metabolism is partially regulated by the central clock for carbon allocation towards primary and secondary xylem growth, and we discuss these networks in the context of previously established associations with wood-related complex traits. This study provides a new resolution into the integration and transcriptional regulation of plastid- and mitochondrial-localized carbon metabolism during xylogenesis.

A Chromosome-Scale Genome Assembly of Paper Mulberry (Broussonetia papyrifera) Provides New Insights into Its Forage and Papermaking Usage

Paper mulberry (Broussonetia papyrifera) is a well-known woody tree historically used for Cai Lun papermaking, one of the four great inventions of ancient China. More recently, Paper mulberry has also been used as forage to address the shortage of feedstuff because of its digestible crude fiber and high protein contents. In this study, we obtained a chromosome-scale genome assembly for Paper mulberry using integrated approaches, including Illumina and PacBio sequencing platform as well as Hi-C, optical, and genetic maps. The assembled Paper mulberry genome consists of 386.83 Mb, which is close to the estimated size, and 99.25% (383.93 Mb) of the assembly was assigned to 13 pseudochromosomes. Comparative genomic analysis revealed the expansion and contraction in the flavonoid and lignin biosynthetic gene families, respectively, accounting for the enhanced flavonoid and decreased lignin biosynthesis in Paper mulberry. Moreover, the increased ratio of syringyl-lignin to guaiacyl-lignin in Paper mulberry underscores its suitability for use in medicine, forage, papermaking, and barkcloth making. We also identified the root-associated microbiota of Paper mulberry and found that Pseudomonas and Rhizobia were enriched in its roots and may provide the source of nitrogen for its stems and leaves via symbiotic nitrogen fixation. Collectively, these results suggest that Paper mulberry might have undergone adaptive evolution and recruited nitrogen-fixing microbes to promote growth by enhancing flavonoid production and altering lignin monomer composition. Our study provides significant insights into genetic basis of the usefulness of Paper mulberry in papermaking and barkcloth making, and as forage. These insights will facilitate further domestication and selection as well as industrial utilization of Paper mulberry worldwide.

Symbiotic Plant Biomass Decomposition in Fungus-Growing Termites

Termites are among the most successful animal groups, accomplishing nutrient acquisition through long-term associations and enzyme provisioning from microbial symbionts. Fungus farming has evolved only once in a single termite sub-family: Macrotermitinae. This sub-family has become a dominant decomposer in the Old World; through enzymatic contributions from insects, fungi, and bacteria, managed in an intricate decomposition pathway, the termites obtain near-complete utilisation of essentially any plant substrate. Here we review recent insights into our understanding of the process of plant biomass decomposition in fungus-growing termites. To this end, we outline research avenues that we believe can help shed light on how evolution has shaped the optimisation of plant-biomass decomposition in this complex multipartite symbiosis.

Global Gene Expression of Seed Coat Tissues Reveals a Potential Mechanism of Regulating Seed Size Formation in Castor Bean

The physiological and molecular basis of seed size formation is complex, and the development of seed coat (derived from integument cells) might be a critical factor that determines seed size formation for many endospermic seeds. Castor bean (Ricinus communis L.), a model system of studying seed biology, has large and persistent endosperm with a hard seed coat at maturity. Here, we investigated the potential molecular mechanisms underlying seed size formation in castor bean by comparing the difference between global gene expression within developing seed coat tissues between the large-seed ZB107 and small-seed ZB306. First, we observed the cell size of seed coat and concluded that the large seed coat area of ZB107 resulted from more cell numbers (rather than cell size). Furthermore, we found that the lignin proportion of seed coat was higher in ZB306. An investigation into global gene expression of developing seed coat tissues revealed that 815 genes were up-regulated and 813 were down-regulated in ZB306 relative to ZB107. Interestingly, we found that many genes involved in regulating cell division were up-regulated in ZB107, whereas many genes involved in regulating lignin biosynthesis (including several NAC members, as well as MYB46/83 and MYB58/63) and in mediating programmed cell death (such as CysEP1 and βVPE) were up-regulated in ZB306. Furthermore, the expression patterns of the genes mentioned above indicated that the lignification of seed coat tissues was enhanced and occurred earlier in the developing seeds of ZB306. Taken together, we tentatively proposed a potential scenario for explaining the molecular mechanisms of seed coat governing seed size formation in castor bean by increasing the cell number and delaying the onset of lignification in seed coat tissues in large-seed ZB107. This study not only presents new information for possible modulation of seed coat related genes to improve castor seed yield, but also provides new insights into understanding the molecular basis of seed size formation in endospermic seeds with hard seed coat.

Computational approach to understand molecular mechanism involved in BPH resistance in Bt- rice plant

In silico approach was utilised to identify differentially expressed key hub genes during BPH infestation on Bt rice plant, under laboratory conditions. Re-analysis of GSE74745 data with in-house R scripts and STRING database reveals that only 5 key hub genes, namely Os05g0176100, Os06g0683200, Os07g0208500, Os07g0252400 and Os07g0424400, belonging to cellulose synthase family, are differentially expressed and have confidence score ≥0.9 among themselves. Conserve domain analysis of all proteins encoded via these 5 key hub genes reveals that they have a common cellulose synthase domain, in which "Plant-Conserved Region" (PCR) is highly conserved. After binding with other domains of cellulose synthase proteins or other accessory proteins, like sucrose synthase, PCR serves as a metabolic channel to deliver UDP-Glucose, which is the main substrate for cellulose synthesis, into the active site of cellulose synthase and initiate cellulose synthesis. Simulation study of recently solved topological model of PCR [PDB ID: 5JNP] and molecular docking studies of PCR with UDP-glucose reveals that, during BPH infestation, in nearby phloem tissue where BPH suck sap, there is an increase interaction of UDP-glucose with PCR and other accessory proteins which in turn increases both the stability of PCR and the production of cellulose, finally causing callose deposition at that site and hence causing longer nymphal developmental period and lower fertility of BPH infested on Bt rice. In near future, these differentially identified 5 hub genes could be possible targets for controlling BPH infestation in rice plant under field conditions and increasing rice yield globally.

Genome-wide characterization of the cellulose synthase gene superfamily in Solanum lycopersicum

The cellulose synthase gene superfamily, which includes the cellulose synthase (CesA) and cellulose synthase-like (Csl) gene families, plays a vital role in the biosynthesis of cellulose and hemicellulose in plants. However, these genes have not been extensively studied in tomato (Solanum lycopersicum), a model for Solanaceae plants and for fleshy fruit development. Here, we identified and systematically analyzed 38 CesA/Csl family members that contained cellulose synthase domain regions, and categorized their encoded proteins into 6 subfamilies (CesA, CslA, CslB, CslD, CslE, and CslG) based on phylogenetic analysis. Most CesA/Csl genes from tomato are closely related to those from Arabidopsis, but the families have distinct features regarding gene structure, chromosome distribution and localization, phylogeny, and deduced protein sequence, indicating that they arose via different evolutionary process. Furthermore, expression analysis of CesA/Csl genes in different tissues at various developmental stages showed that most CesAs were constitutively expressed with differential expression levels in various organs; three CslD genes were expressed specifically in flowers, and four CesA and five Csl putative genes were preferentially expressed in fruits. Our results provide insight into the general characteristics of the CesA/Csl genes in tomato, and lay the foundation for further functional studies of CesA/Csl genes in tomato and other Solanaceae species.

GC-MS metabolite profiling for specific detection of dwarf somaclonal variation in banana plants

PREMISE OF THE STUDY

The production of banana (Musa spp.; Musaceae) plants is affected by various types of somaclonal variations (SV), including dwarfism. However, methods for specific detection of SV are still scarce. To overcome this, a metabolite-based method for detection of dwarf variants was evaluated.

METHODS

The gas chromatography-mass spectrometry (GC-MS) metabolite profile of dwarf banana variants was investigated and compared to that of normal-healthy (N) and cucumber mosaic virus (CMV)-infected plants using principal components analysis and partial least squares discriminant analysis (PLS-DA).

RESULTS

Significant differences among the sample groups were observed in 82 metabolites. Rhamnose was exclusively present in dwarf plants but allothreonine and trehalose were present in all but SV samples. Cellobiose was only detected in N plants, while 45 other metabolites, including methyl-glucopyranoside, allopyranose, lactose, phenylalanine, and l-lysine were detected in all but CMV-infected samples. PLS-DA models were able to detect SV, CMV, and N plants with 100% accuracy and specificity.

DISCUSSION

The GC-MS metabolite profile can be used for the rapid, specific detection of SV at early plant production stages. This is the first metabolite-based characterization and detection of somaclonal variation in plants.

Nitrogen Source Dependent Changes in Central Sugar Metabolism Maintain Cell Wall Assembly in Mitochondrial Complex I-Defective frostbite1 and Secondarily Affect Programmed Cell Death

For optimal plant growth, carbon and nitrogen availability needs to be tightly coordinated. Mitochondrial perturbations related to a defect in complex I in the Arabidopsis thalianafrostbite1 (fro1) mutant, carrying a point mutation in the 8-kD Fe-S subunit of NDUFS4 protein, alter aspects of fundamental carbon metabolism, which is manifested as stunted growth. During nitrate nutrition, fro1 plants showed a dominant sugar flux toward nitrogen assimilation and energy production, whereas cellulose integration in the cell wall was restricted. However, when cultured on NH₄⁺ as the sole nitrogen source, which typically induces developmental disorders in plants (i.e., the ammonium toxicity syndrome), fro1 showed improved growth as compared to NO₃⁻ nourishing. Higher energy availability in fro1 plants was correlated with restored cell wall assembly during NH₄⁺ growth. To determine the relationship between mitochondrial complex I disassembly and cell wall-related processes, aspects of cell wall integrity and sugar and reactive oxygen species signaling were analyzed in fro1 plants. The responses of fro1 plants to NH₄⁺ treatment were consistent with the inhibition of a form of programmed cell death. Resistance of fro1 plants to NH₄⁺ toxicity coincided with an absence of necrotic lesion in plant leaves.

Cellulose synthase 'class specific regions' are intrinsically disordered and functionally undifferentiated

Cellulose synthases (CESAs) are glycosyltransferases that catalyze formation of cellulose microfibrils in plant cell walls. Seed plant CESA isoforms cluster in six phylogenetic clades, whose non-interchangeable members play distinct roles within cellulose synthesis complexes (CSCs). A 'class specific region' (CSR), with higher sequence similarity within versus between functional CESA classes, has been suggested to contribute to specific activities or interactions of different isoforms. We investigated CESA isoform specificity in the moss, Physcomitrella patens (Hedw.) B. S. G. to gain evolutionary insights into CESA structure/function relationships. Like seed plants, P. patens has oligomeric rosette-type CSCs, but the PpCESAs diverged independently and form a separate CESA clade. We showed that P. patens has two functionally distinct CESAs classes, based on the ability to complement the gametophore-negative phenotype of a ppcesa5 knockout line. Thus, non-interchangeable CESA classes evolved separately in mosses and seed plants. However, testing of chimeric moss CESA genes for complementation demonstrated that functional class-specificity is not determined by the CSR. Sequence analysis and computational modeling showed that the CSR is intrinsically disordered and contains predicted molecular recognition features, consistent with a possible role in CESA oligomerization and explaining the evolution of class-specific sequences without selection for class-specific function.

The roles of microsporidia spore wall proteins in the spore wall formation and polar tube anchorage to spore wall during development and infection processes

Microsporidia are highly specialized obligate intracellular, spore forming divergent fungi with a wide variety host range that includes most vertebrates and invertebrates. The resistant spores are surrounded by a rigid cell wall which consists of three layers: the electron-lucent chitin and protein inner endospore, the outer-electron-dense and mainly proteinaceous exospore and plasma membrane. Interestingly, microsporidia owns a special invasion organelle, called polar tube, coiled within the interior of the spore wall and attached to anchoring disk at the anterior end of spore. Spore wall and polar tube are the major apparatuses for mature spores adhering and infecting to the host cells. In this review, we summarize the research advances in spore wall proteins (SWPs) related to spore adherence and infection, and SWPs and deproteinated chitin spore coats (DCSCs) interaction associated with SWPs deposit processes and spore wall assembly. Furthermore, we highlight the SWPs-polar tube proteins (PTPs) interaction correlated to polar tube orderly orientation, arrangement and anchorage to anchoring disk. Based on results obtained, it is helpful to improve understanding of the spore wall assembly and polar tube orderly arrangement mechanisms and molecular pathogenesis of microsporidia infection. Also, such information will provide a basis for developing effective control strategies against microporidia.

AtCSLD3 and GhCSLD3 mediate root growth and cell elongation downstream of the ethylene response pathway in Arabidopsis

CSLD3, a gene of the cellulose synthase-like D family, affects root hair elongation, but its interactions with ethylene signaling and phosphate-starvation are poorly understood. Here, we aim to understand the role of CSLD3 in the context of the ethylene signaling and phosphate starvation pathways in Arabidopsis plant growth. Therefore, we performed a comparative analysis of the csld3-1 mutant, CSLD3-overexpressing lines, and ethylene-response mutants, such as the constitutive ethylene-response mutant i-ctr1. We found that CSLD3 overexpression enhanced root and hypocotyl growth by increasing cell elongation, and that the root growth was highly sensitive to ethylene treatment (1 µM ACC), in particular under phosphate starvation. However, the CSLD3-mediated hypocotyl elongation occurred independently of the ethylene signaling pathway. Notably, the typical induction of root hair and root elongation by ethylene and phosphate-starvation was completely abolished in the csld3-1 mutant. Furthermore, i-ctr1 csld3-1 double-mutants were hairless like the csld3-1 parent, confirming that CSLD3 acts downstream of the ethylene signaling pathway during root growth. Moreover, the CSLD3 levels positively correlated with cellulose levels, indicating a role of CSLD3 in cellulose synthesis, which may explain the observed growth effects. Our results establish how CSLD3 works in the context of the ethylene signaling and phosphate-starvation pathways during root hair growth, cell elongation, and cell wall biosynthesis.

Current progress in production of biopolymeric materials based on cellulose, cellulose nanofibers, and cellulose derivatives

Cellulose has attracted considerable attention as the strongest potential candidate feedstock for bio-based polymeric material production. During the past decade, significant progress in the production of biopolymers based on different cellulosic forms has been achieved. This review highlights the most recent advances and developments in the three main routes for the production of cellulose-based biopolymers, and discusses their scope and applications. The use of cellulose fibers, nanocellulose, and cellulose derivatives as fillers or matrices in biocomposite materials is an efficient biosustainable alternative for the production of high-quality polymer composites and functional polymeric materials. The use of cellulose-derived monomers (glucose and other platform chemicals) in the synthesis of sustainable biopolymers and functional polymeric materials not only provides viable replacements for most petroleum-based polymers but also enables the development of novel polymers and functional polymeric materials. The present review describes the current status of biopolymers based on various forms of cellulose and the scope of their importance and applications. Challenges, promising research trends, and methods for dealing with challenges in exploitation of the promising properties of different forms of cellulose, which are vital for the future of the global polymeric industry, are discussed. Sustainable cellulosic biopolymers have potential applications not only in the replacement of existing petroleum-based polymers but also in cellulosic functional polymeric materials for a range of applications from electrochemical and energy-storage devices to biomedical applications.

Crystal structure of the flexible tandem repeat domain of bacterial cellulose synthesis subunit C

Bacterial cellulose (BC) is synthesized and exported through the cell membrane via a large protein complex (terminal complex) that consists of three or four subunits. BcsC is a little-studied subunit considered to export BC to the extracellular matrix. It is predicted to have two domains: a tetratrico peptide repeat (TPR) domain and a β-barrelled outer membrane domain. Here we report the crystal structure of the N-terminal part of BcsC-TPR domain (Asp24-Arg272) derived from Enterobacter CJF-002. Unlike most TPR-containing proteins which have continuous TPR motifs, this structure has an extra α-helix between two clusters of TPR motifs. Five independent molecules in the crystal had three different conformations that varied at the hinge of the inserted α-helix. Such structural feature indicates that the inserted α-helix confers flexibility to the chain and changes the direction of the TPR super-helix, which was also suggested by structural analysis of BcsC-TPR (Asp24-Leu664) in solution by size exclusion chromatography-small-angle X-ray scattering. The flexibility at the α-helical hinge may play important role for exporting glucan chains.

Evolution, gene expression profiling and 3D modeling of CSLD proteins in cotton

BACKGROUND

Among CESA-like gene superfamily, the cellulose synthase-like D (CSLD) genes are most similar to cellulose synthase genes and have been reported to be involved in tip-growing cell and stem development. However, there has been no genome-wide characterization of this gene subfamily in cotton. We thus sought to analyze the evolution and functional characterization of CSLD proteins in cotton based on fully sequenced cotton genomes.

RESULTS

A total of 23 full-length CSLD proteins were identified in Gossypium raimondii, Gossypium arboreum and Gossypium hirsutum. The phylogenetic tree divided the CSLD proteins into five clades with strong support: CSLD1, CSLD2/3, CSLD4, CSLD5 and CSLD6. The total expression of GhCSLD genes was the highest in androecium & gynoecium (mostly contributed by CSLD1 and CSLD4) compared with other CSL genes. CSLD1 and CSLD4 were only highly expressed in androecium & gynoecium (A&G), and showed tissue-specific expression. The total expression of CSLD2/3, 5 and 6 was highest in the specific tissues. These results suggest that CSLD genes showed the different pattern of expression. Cotton CSLD proteins were subjected to different evolutionary pressures, and the CSLD1 and CSLD4 proteins exhibited episodic and long-term shift positive selection. The predicted three-dimensional structure of GrCSLD1 suggested that GrCSLD1 belongs to glycosyltransferase family 2. The amino acid residues under positive selection in the CSLD1 lineage are positioned in a region adjacent to the class-specific region (CSR), β1-strand and transmembrane helices (TMHs) in the GrCSLD1structure.

CONCLUSION

Our results characterized the CSLD proteins by an integrated approach containing phylogeny, transcriptional profiling and 3D modeling. The study added to the understanding about the importance of the CSLD family and provide a useful reference for selecting candidate genes and their associations with the biosynthesis of the cell wall in cotton.

Impact of an arbuscular mycorrhizal fungus versus a mixed microbial inoculum on the transcriptome reprogramming of grapevine roots

Grapevine, cultivated for both fruit and beverage production, represents one of the most economically important fruit crops worldwide. With the aim of better understanding how grape roots respond to beneficial microbes, a transcriptome sequencing experiment has been performed to evaluate the impact of a single arbuscular mycorrhizal (AM) fungal species (Funneliformis mosseae) versus a mixed inoculum containing a bacterial and fungal consortium, including different AM species, on Richter 110 rootstock. Results showed that the impact of a single AM fungus and of a complex microbial inoculum on the grapevine transcriptome differed. After 3 months, roots exclusively were colonized after the F. mosseae treatment and several AM marker genes were found to be upregulated. The mixed inoculum led only to traces of colonization by AM fungi, but elicited an important transcriptional regulation. Additionally, the expression of genes belonging to categories such as nutrient transport, transcription factors, and cell wall-related genes was significantly altered in both treatments, but the exact genes affected differed in the two conditions. These findings advance our understanding about the impact of soil beneficial microbes on the root system of a woody plant, also offering the basis for novel approaches in grapevine cultivation.