Edentulism and comorbid factors

Tooth Loss and Systemic Diseases in the Slovenian Elderly Population: A Cross-Sectional Study of the Associaton Between Oral and Systemic Health

Introduction

This study aimed to assess the prevalence of edentulism and tooth loss in the Slovenian elderly population, along with the associated risk factors, and investigate the association between systemic and oral health.

Methods

The study included 445 individuals aged 65 or older (average age: 79.7±8.9 years). Data on preserved teeth, dental history, chronic diseases, and medications were collected through clinical examinations. Height and weight were recorded in order to calculate body mass index (BMI), and the education level was also collected. Chronic systemic diseases and medications were categorized. Statistical analysis was conducted using linear regression and nonparametric tests.

Results

Participants had an average of 4.7±7.7 teeth, with no significant gender differences. Higher age (β=-0.185, p<0.001) and lower education level (p<0.001) were associated with fewer teeth, while higher BMI showed no correlation (β=-0.085, p=0.325). Diabetes mellitus (p=0.031), cardiovascular diseases (p=0.025), and thyroid diseases (p=0.043) were inversely related to retained teeth. This inverse relationship also applied to individuals who recovered from malignancies, not including head and neck malignancies (p=0.019). No significant relationship was found between osteoporosis and the number of teeth (p=0.573). Notably, antidiabetic drug use was inversely related to the number of teeth (p=0.004), while analgesics showed a positive relationship (p=0.022).

Conclusions

This study highlights the association between specific sociodemographic factors, chronic diseases, and retained teeth among elderly individuals in Slovenia. High edentulism rates among the elderly emphasize the need for enhanced preventive measures and risk factor management, particularly for high-risk groups like the elderly.

Clinical evaluation on the use of a new accessory device for Fox plane

OBJECTIVE

Evaluate the assimilation capacity and ease of handling of the Fox plane accessory by dentistry students, through a questionnaire about the experience in using this device compared to the conventional one. Its intention is to minimize possible interpretation errors and challenges that the traditional method determines.

METHODS

After approval by the Research Ethics Committee, registration at Sistema Nacional de Informações sobre Ética em Pesquisa/National Information System on Research Ethics (SISNEP) and signing of the free and informed consent form, 51 undergraduate students treating patients in need of complete dentures at Instituto de Ciência e Tecnologia/Institute of Science and Technology (ICT) Unesp in São José dos Campos completed a questionnaire to evaluate the technical ease of use and provider acceptance. The obtained data were submitted to statistical analysis, evaluating technical ease and acceptance by operators.

RESULTS

The results were analyzed using descriptive and inferential statistics using the Jamovi 2.2.5 software. From the responses, the frequency was obtained for each question in the questionnaire, then the weighted mean was calculated, average rating and percentage. With the results of these analyses it was possible to measure the level of satisfaction of the participants in relation to the use of the device.

CONCLUSION

It was concluded that most students have difficulty using the conventional Fox plane and that the accessory facilitated the process of determining the superior orientation plane, and its ease of use.

Focus of dental sleep medicine on obstructive sleep apnea in older adults: A narrative review

PURPOSE

To review dental sleep medicine in older adults based on the literature.

STUDY SELECTION

This narrative review focuses on sleep physiology, common sleep disorders, and obstructive sleep apnea (OSA) in older adults and their management.

RESULTS

Sleep physiology differs between older and younger adults, with sleep disturbances occurring more frequently in older adults. The prevalence of insomnia increases in older adults due to age-related changes in sleep physiology. Insomnia, sleep-disordered breathing, periodic limb movement disorder, restless legs syndrome, and rapid eye movement (REM) sleep behavior disorder are common sleep disorders in older adults. OSA is more prevalent in older adults, and its effects on them are considered more substantial than those on younger adults. The treatment of older patients with mandibular advancement devices may be less effective and more complex owing to potential impairments in oral and dental health. Furthermore, the prevalence of edentulism in older adults is decreasing while life expectancy is increasing.

CONCLUSIONS

As older adults have comorbidities that affect sleep quality, dentists should consider the effects of sleep physiology and sleep disorders in these patients. OSA may decrease the quality of life and increase the risk of developing other diseases. Therefore, dentists proposing treatment with mandibular advancement devices need to inform patients of their potential lack of efficacy and the requirement for careful follow-up owing to known and unknown side effects.

The impact of dentition status and barriers to dental care services on perceived oral health of medicare beneficiaries

OBJECTIVE

To examine the association among barriers to dental care services, dentition groups, and self-reported oral health status for Medicare beneficiaries.

METHODS

We used data from the 2017 to 2018 National Health and Nutrition Examination Survey (NHANES), which included participants aged ≥65 years who were enrolled in Medicare and had completed the oral health exam. We created a dentition group variable using the detailed dental examination data to account for the presence of natural, replaced, removable, or missing teeth. Through bivariate and logistic analyses, we explored the relationship between barriers to receiving dental care services, dentition groups, and reported oral and general health statuses, along with other control variables.

RESULTS

For the total Medicare population as well as in the four subgroup analyses, we showed that those with barriers to dental care services were more likely to report fair or poor oral health status. Those who were edentulous, had complete dentures, or had less than a full mouth of teeth had greater barriers and worse oral and general health than did those with all-natural teeth. Among those who reported fair or poor general health, those with less than a full mouth of teeth showed similar levels of barriers to dental care services and worse perceived oral health than did those without any teeth.

CONCLUSIONS

Helping the 65 years and older population retain their teeth in good condition will improve their overall health. Investment in oral hygiene and health for the current and future Medicare populations could improve their overall health.

A comparative analysis of the passivity of fit of complete arch implant-supported frameworks fabricated using different acquisition techniques

STATEMENT OF PROBLEM

The accuracy of intraoral scanners (IOSs) in recording edentulous jaws has improved recently. However, improvement in accuracy does not necessarily imply the clinical validity of the scans, and limited information is available regarding the manufacture of passively fitting prostheses.

PURPOSE

The purpose of this in vitro study was to analyze the passivity of complete arch screw-retained frameworks fabricated using different acquisition techniques.

MATERIAL AND METHODS

A 3-dimensional maxillary edentulous model to receive all-on-4 screw-retained frameworks was prototyped. Eighteen polymethylmethacrylate (PMMA) frameworks were fabricated with a 5-axis milling machine and divided into 3 groups according to the acquisition technique (n=6): scanned by using an IOS (CEREC Primescan; Dentsply Sirona), scanned with the aid of an auxiliary device by using the same IOS, and by using a conventional impression and then scanning the stone cast with an extraoral scanner (EOS). The passivity of fit of the frameworks was tested with the 1-screw test, the terminal screw of the framework assembly was tightened on the multiunit abutment (MUA), and the vertical marginal gap (µm) was measured at the other 3 framework-to-abutment interfaces by using a digital microscope at ×40 magnification. A modification to the 1-screw test was analyzed by tightening all screws and then unscrewing all except 1 of the anterior abutments. Data were explored for normality by using the theoretical quantile-quantile (Q-Q) plots and the Shapiro-Wilk test of normality. The Friedman test compared data between the different acquisition techniques; the tightening methods and locations (buccal and palatal) were used as the block variable. The post hoc Dunn test was used when the Friedman test was significant. The Kruksal-Wallis test compared the data from the 2 groups of the tightening methods and the 2 location groups. The aligned rank transformation (ART) ANOVA test was used for the interaction effects among the 3 variables. A multiway ANOVA was applied to the ranked data. (α=.05 for all tests).

RESULTS

Significant differences were found among all groups (P<.001). Regarding the passivity of fit, the mean vertical marginal gap was 50 µm for frameworks fabricated from an intraoral scan with the aid of an auxiliary device, 62 µm for frameworks fabricated by using an IOS, and 140 µm for frameworks fabricated by using an EOS. No significant difference was found among all groups regarding the tightening method (P=.355) or location measured (P=.175).

CONCLUSIONS

Digital scanning with the aid of an auxiliary device resulted in the best fit; however, digital approaches with or without the auxiliary device resulted in a more accurate fit with a smaller marginal gap than with the conventional impression.

Edentulism and Individual Factors of Active Aging Framework in Colombia

BACKGROUND

While edentulism remains a serious public health problem for older adults in Colombia, few analyses have been conducted from the framework of active aging as a part of the positive discourse of aging. This study analyzed complete edentulism and its relationship with determinants including personal, behavioral, and health systems and social services.

METHODS

This study included a total of 19,004 older adults. We used univariate, bivariate, and multivariate logistic regression type scores to investigate the relationships between the variables. The personal determinants included basic (Barthel scale) and instrumental activities of daily living (Lawton scale), public transportation, functional limitations, self-perceived health, and health problems. The behavioral factors included alcohol and tobacco use, mini nutritional tests, and physical activity. The last determinant was the healthcare system, while social services access included dental services. The analysis also included sociodemographic variables.

RESULTS

The results revealed significant associations for the variables of the three determinants, including the risk of malnutrition (odds ratio [OR]=1.15), functional limitation (OR=1.15), moderate physical activity (OR=1.08), and access to dental services (OR=2.31). Sex, years of education, and race were also risk factors, among other variables. Personal determinants, behavior, and use and access to health services were related to edentulism in older adults.

CONCLUSION

These findings support the need to include different analyses of edentulism from multicausality and to understand the oral cavity and the living conditions of aging adults.

Edentulism among diabetic patients compared to non-diabetic controls: A systematic review and meta-analysis

OBJECTIVE

The purpose of this paper is to systematically and critically appraise the available scientific evidence concerning the prevalence of edentulism among diabetic patients compared to non-diabetic people.

METHODS

MEDLINE-PubMed and Cochrane-CENTRAL databases were comprehensively searched up to April 2023 to identify appropriate studies. The inclusion criteria were observational studies conducted in human subjects ≥18 years of age with the primary aim of investigating the prevalence of edentulism among diabetic patients. Based on the extracted data, a meta-analysis was performed. Recommendations based on the body of evidence were formulated using the GRADE approach.

RESULTS

Independent screening of 2085 unique titles and abstracts revealed seven publications that met the eligibility criteria. Study size ranged from 293 to 15,943 participants. Data from all seven studies were suitable for meta-analysis. Overall, 8.3% of the studied population was edentulous. The weighted mean prevalence of edentulism among diabetic and non-diabetics was 14.0% and 7.1%, respectively. The overall odds ratio for diabetic patients to be edentulous as compared to non-diabetics was 2.39 (95% CI [1.73, 3.28], p < 0.00001).

CONCLUSION

There appears to be moderate certainty that the risk of being edentulous for diabetic patients compared to non-diabetic people is significant, but the odds ratio is estimated to be small.

Teeth Rehabilitation and Nutritional Influence on Diabetic Patients: A Review

Diabetes mellitus (DM) is a globally prevalent endocrine and metabolic disorder characterized by hyperglycemia. Its complications significantly impact both the quality and longevity of the patient's life with a substantial burden on the healthcare system. Missing teeth make individuals more susceptible to malnutrition compared to those with functional teeth. This is especially true for people with diabetes, as the condition is closely linked to both oral health and food intake. Natural teeth loss can significantly reduce an individual's ability to chew food, leading to a decrease in the quality and quantity of their nutrition. Prosthodontics is a dental specialty that replaces missing teeth with artificial ones. Replacing missing teeth may prevent the risk of malnutrition due to decreased ability to chew. Good oral health is important for overall health, especially for those with conditions such as diabetes. Artificial teeth replacement may improve nutrition intake by improving chewing ability. Therefore, the ultimate objective of rehabilitating a patient's oral cavity is to replace the shape and function in terms of chewing performance to a degree that is as close to normal as feasible. The purpose of this review is to explore the literature showing the link between natural teeth loss and nutrition in individuals with DM, with a special focus on prosthodontic management. Several oral complications occur in diabetic patients specifically teeth loss, which in turn affects mastication function. This in turn cause malnutrition and affect glucose level. It is imperative for healthcare providers to take an interdisciplinary approach in order to improve the dental and nutritional status and overall well-being of DM patients.

Impact of xerostomia and the use of dental prosthesis on the quality of life of elderly

Aim: To evaluate the impact of xerostomia, edentulism, use of dental prosthesis, and presence of chronic diseases on quality of life in relation to oral health in institutionalized elderly individuals. Methods: This is a cross-sectional study. A questionnaire was administered containing the following instruments: Oral Health Impact Profile (OHIP-14), which measures the quality of life related to oral health; the Summated Xerostomia Inventory questionnaire (SXI-PL) for evaluation of xerostomia, sociodemographic data, clinical description, and patient-reported factors was assessed (edentulism, use of dental prostheses, and chronic diseases). Results: Most elderly individuals did not have any teeth in their mouths and used dental prosthesis. The impact on quality of life, considering the mean of the OHIP-14 scores, was positive in 58.3% of the elderly. Those who used a dental prosthesis were three times more likely to have their oral health negatively impacted (OR=3.09; 95%CI =1.17 8.11), compared to those who did not use, and individuals with xerostomia were more likely to have their oral health negatively impacted (OR=1.57; 95%CI=1.25-1.98) compared to those without xerostomia. There was no difference in the quality of life of individuals with and without chronic diseases. Conclusions: The feeling of dry mouth and use of dental prostheses negatively impacted the quality of life in relation to oral health of the elderly.

Periodontitis and edentulism as risk indicators for mortality: Results from a prospective cohort study with 20 years of follow-up

AIM

To investigate the association between periodontitis and edentulism with cardiovascular disease (CVD) and all-cause mortality.

METHODS

Baseline data of 506 subjects including 256 angiographically verified coronary artery disease patients and 250 matched participants in cardiovascular health from the Kuopio Oral Health and Heart study were collected from 1995-1996. Mortality data were accrued until May 31, 2015, and related to baseline periodontal health and edentulism, assessed as exposure and collected by means of clinical and radiographic examination by a single examiner. Cox proportional hazards regression models were fit using covariates such as age, gender, smoking, BMI, and education. The final sample size for the periodontitis models ranged from 358 to 376, while the edentate models included 413 to 503 subjects for CVD and all-cause mortality, respectively with no missing values in the predictor, confounders, and outcome.

RESULTS

The strongest association was found between edentulism and CVD and all-cause mortality (HR: 1.9 ^CVD , HR: 1.6^all-cause ; p < .01).

CONCLUSIONS

Edentulism considered as a poor oral health marker was associated strongly with CVD mortality while periodontitis was not.

Mastication Wear of Two Low Profile Attachment Systems for Overdenture: An In Vitro Study

Background

Edentulism is still a major problem in the world's population today. Implant-retained overdenture has proven to be a valid therapeutic solution in the mandible. This type of rehabilitation requires replacement of the matrices when those reach inadequate retention due to wearing processes. This study is aimed at evaluating the drop in retention of low-profile precision attachments following the application of vertical chewing forces. Two different attachment designs were compared.

Methods

This in vitro study simulated an implant-retained overdenture on an edentulous mandible. Two low-profile attachments were compared. Loaded and unloaded sides were considered. Tests were performed by exerting a vertical cyclic force on the prosthesis at the level of the first molar of a hemiarch. Retention tests were performed before and after 400.000 chewing cycles, comparable to one year of use.

Results

The presence of vertical load wear was identified and characterized. Retention never fell below the values indicated by the manufacturer. Furthermore, significant differences were identified between the two retention systems.

Conclusions

Loss of occlusal load retention is a component that must be evaluated by the clinician during the design of implant-prosthetic rehabilitation, particularly in those cases where elevated occlusal forces or parafunctions are present.

Poor oral health status and adverse COVID-19 outcomes: A preliminary study in hospitalized patients

BACKGROUND

Most of the common risk factors for severe outcomes of coronavirus disease 2019 (COVID-19) are correlated with poor oral health, tooth loss, and periodontitis. This has pointed to a possible relationship between oral and systemic health in COVID-19 patients. Hence, this study aimed to assess the dental and periodontal status of hospitalized COVID-19 patients and their associations with the incidence of adverse COVID-19 outcomes.

METHODS

We included 128 hospital patients aged between 20 and 97 years and with diagnoses of COVID-19 in this prospective observational study. Dental and periodontal status was assessed using in-hospital clinical examinations, including the Decayed, Missing, and Filled Teeth index, periodontal status, and tooth loss patterns (Eichner index). Associations between oral health measures, the severity of COVID-19 symptoms, and hospitalization endpoints were tested using chi-square test and incidence rate ratio (IRR) estimation using a generalized linear model with log-Poisson regression. The regression models used a block-wise selection of predictors for oral health-related variables, comorbidities, and patients' ages.

RESULTS

Overall, poor oral health conditions were highly prevalent and associated with critical COVID-19 symptoms, higher risk for admission in the intensive care unit (ICU), and death. Periodontitis was significantly associated with ICU admission (IRR = 1.44; 95% confidence interval [95%CI] = 1.07-1.95; P = 0.017), critical symptoms (IRR = 2.56; 95%CI = 1.44-4.55; P = 0.001), and risk of death (IRR = 2.05; 95%CI = 1.12-3.76; P = 0.020) when adjusted for age and comorbidities. The Eichner index (classes B and C) was associated with ICU admission.

CONCLUSION

There was a positive association between deleterious oral health-related conditions, especially periodontitis, and severe COVID-19 outcomes in hospitalized COVID-19 patients.

Association between type 2 diabetes (T2D) and tooth loss: a systematic review and meta-analysis

BACKGROUND

Several studies have assessed the relationship between type 2 diabetes (T2D) and tooth loss; however, results have been inconsistent. Therefore, the present systematic review and meta-analysis of observational studies was designed to examine the association between T2D and tooth loss.

METHODS

This systematic review and meta-analysis was conducted based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Guideline. We searched all the relevant studies in international databases of Scopus, PubMed, ProQuest, Web of Science, Cochrane Library, and Google scholar search engine until February 2022. The heterogeneity of the studies was calculated using the I2 index. Measure of effect and 95% confidence interval (CI) were extracted from each study. The results of the study were analyzed using the random effects model.

RESULTS

In the present study, 22 eligible studies were included. Meta-analysis of unadjusted and adjusted results showed that T2D significantly increased the risk of tooth loss, and Odds Ratio (OR) unadjusted was 1.87 (95% CI: 1.62-2.13, p < 0.001), and OR adjusted was 1.20 (95% CI: 1.10-1.30, p < 0.001), respectively. Subgroup analysis based on study design for adjusted OR indicated that in the cohort study (OR: 1.29, 95% CI: 1.07-1.51), in the cross-sectional study (OR: 1.15, 95% CI: 1.06-1.23), and in the case-control study (OR: 5.10, 95% CI: 1.01-9.18) there was a significant association between T2D and tooth loss. Other subgroups analyses showed consistent results and no publication bias existed.

CONCLUSIONS

The findings suggest that T2D is associated with increased risk of tooth loss. This conclusion may provide useful evidence for correlated clinical researches.

Nitinol Type Alloys General Characteristics and Applications in Endodontics

A very extensive literature review presents the possibilities and needs of using, in endodontics, the alloys commonly known as nitinol. Nitinol, as the most modern group of engineering materials used to develop root canals, is equilibrium nickel and titanium alloys in terms of the elements’ atomic concentration, or very similar. The main audience of this paper is engineers, tool designers and manufacturers, PhD students, and students of materials and manufacturing engineering but this article can also certainly be used by dentists. The paper aims to present a full material science characterization of the structure and properties of nitinol alloys and to discuss all structural phenomena that determine the performance properties of these alloys, including those applied to manufacture the endodontic tools. The paper presents the selection of these alloys’ chemical composition and processing conditions and their importance in the endodontic treatment of teeth. The results of laboratory studies on the analysis of changes during the sterilization of endodontic instruments made of nitinol alloys are also included. The summary of all the literature analyses is an SWOT analysis of strengths, weaknesses, opportunities, and threats, and is a forecast of the development strategy of this material in a specific application such as endodontics.

Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) Complete Dentures for Atrophic Alveolar Ridges: Workflow Combining Conventional and Novel Techniques

Extreme residual ridge resorption is a challenging clinical situation for the fabrication of complete dental prostheses. Computer-aided design and computer-aided manufacturing (CAD/CAM) complete dentures have been shown to have superior fit and material strength to conventionally fabricated dentures, but no clinical protocols have been described for cases of extreme residual ridge resorption. This report describes a workflow combining conventional and novel techniques for CAD/CAM complete dentures fabrication for atrophic alveolar ridges and demonstrates that a CAD/CAM workflow is an effective tool for solving this complex situation.

Functional Removable Prosthetic Rehabilitation Using the Electronic Condylograph: A Case Report

This article describes the design of complete removable prostheses following the Slavicek philosophy, which involves the integration between condylographic data and an individual cephalometric study of the patient. The electronic condylograph is a device that records the mandibular movements made by the patient. This case report shows how condylography data are useful not only in the individual articulator setting, but also for diagnostic completion and for planning a functional prosthetic rehabilitation.

Oral health-related quality of life of patients using single or two-implant mandibular overdentures with immediate loading protocols: A randomized controlled trial

Aim:

Single implant-retained mandibular overdentures (1IMO) is a viable alternative to 2 implant-retained overdentures (2IMO) in edentulous patients. However, literature lacks in the quality of life (QoL) of these patients when treated with immediate loading protocols. The purpose of this study was to compare oral health-related QoL (OHRQoL) of patients using 1IMO or 2 IMO with immediate loading protocols at 1 month and 1 year.

Settings and Design:

Randomized Controlled Trial.

Materials and Methods:

Fifty-two edentulous participants treated with mandibular overdentures using either single implant (n = 26) or two implants (n = 26) with immediate loading protocol by a single operator. The low-profile stud-attachments (LOCATOR; Zest Anchors) were attached to the implants and female attachments were picked up within 0–7 days of implant placement. The OHRQoL was recorded using Oral Health Impact Profile-14 (OHIP-14) questionnaire either in English or in the Malay language before treatment and 1 month and 1 year after treatment.

Statistical Analysis Used:

Kruskal Wallis test was used to find out significant difference amongst 3 timepoints and 7 OHIP-14 domains and Mann-Whitney-U test to compare 1IMO or 2IMO groups.

Results:

Compared to baseline OHIP-14 scores, participants had a statistically significant decrease in total OHIP-14 at 1 month and 1 year after-treatment time points in both 1IMO and 2IMO groups (P < 0.05). The difference between 1 month and 1 year after-treatment total and subscale scores were also found to be statistically significant (P < 0.05). The overall QoL improvement was comparatively higher in 2IMO group than 1IMO group. The OHIP-14 scores were statistically different within seven domains (P < 0.05). Overall total scores between 1IMO and 2IMO groups were also found to be statistically significant (P < 0.05) at baseline and insignificant (P > 0.05) at 1 month and 1 year.

Conclusions:

Mandibular single and 2IMO improve the QoL of elderly edentulous Malaysian participants at 1 month of immediate loading and 1 year of recall. 1IMO may provide comparable QoL with the elderly patients using 2 implants.

What Are the Chances of Resilon to Dominate the Market Filling Materials for Endodontics?

This paper is a literature review with additional virtual analyses of the authors’ own experimental research results. Knowledge from various areas was synergistically combined, appropriately for concurrent engineering, presenting several possible methodological approaches used in research, optimizing the selection of engineering materials and the conditions of their application with particular application in endodontics. Particular attention was paid to the theoretical aspects of filling material strengths, weaknesses, opportunities, and threats SWOT analysis. Attention was paid to the original concepts of Sustainable Dentistry Development in conjunction with Dentistry 4.0, which includes endodontics as an important element. The dentists’ actions, among others, in conservative dentistry, along with endodontics, requires close cooperation with engineers and the enginering sciences. Methods of root canal preparation were described, together with selected tools, including those made of nitinol. Principles concerning the process of cleaning and shaping the pulp complex are presented. The importance of obturation methods, including the Thermo-Hydraulic-Condensation THC technique, and the selection of filling materials with the necessary sealants for the success of endodontic treatment are discussed. The experimental studies were carried out in vitro on human teeth removed for medical reasons, except for caries, for which two groups of 16 teeth were separated. After the root canal was prepared, it was filled with studs and pellets of a filling material based on polyester materials, which has gained the common trade name of resilon or, less frequently, RealSeal (SybronEndo) with an epiphany sealant. The teeth for the first group were obturated by cold lateral condensation. In the second case the obturation was performed using the Thermo-Hydraulic-Condensation technique using System B and Obtura III. The experimental leakage testing was done using a scanning electron microscope SEM and a light stereoscopic microscope LSM, as typical research tools used in materialography. The research results, in a confrontation with the data taken from the literature studies, do not indicate the domination of resilon in endodontics.

Treatment planning considerations in the older adult with periodontal disease

Periodontal health in the elderly is influenced by numerous factors, including systemic conditions, patient compliance, age-associated changes, and restorative procedures. The numerous comorbidities seen in the elderly necessitate individualized approaches for treatment planning. In this paper, we review how age, comorbidities, oral hygiene, and restorative dental procedures collectively influence the treatment and management of the periodontium in the elderly. The elderly population is predicted to double in 30 years, which will have an economic impact the dental profession needs to plan for. Preventative and noninvasive treatment, supportive periodontal therapy, and patient-specific maintenance plans are imperative to maintaining oral health in the older population. Multiple coexisting changes, including xerostomia, altered wound healing, altered bone physiology, altered microbiome, and diminished plaque control, can add complexity to periodontal management. Considerations of the patient's general health, the selected periodontal treatment plan, and the selected completed restorative procedures need to be considered. The influence of caries, fixed prosthodontics, partial dentures, shortened dental arch, and implant therapy can have unintended impacts on periodontal health in the elderly. Adverse periodontal outcomes in the elderly can be minimized by carefully assessing the patient's medical history, impact of medications, functional needs, properly finishing and contouring restorations to avoid plaque accumulation, and designing restorations to allow access for hygiene. Partial dentures can be a source of plaque accumulation leading to periodontal disease, caries, and recession around abutment teeth. A shortened dental arch should be considered as a functional and cost-effective alternative to partial dentures. With dental implants, the patient's tissue phenotype, keratinized tissue quantity, risk of peri-implantitis, and patient access for maintaining adequate oral hygiene are all important to consider. Implant risk-assessment tools show promise by providing a systematic approach for early diagnosis to avoid future complications.

Is Gutta-Percha Still the “Gold Standard” among Filling Materials in Endodontic Treatment?

The paper is an extensive monographic review of the literature, and also uses the results of the authors’ own experimental research illustrating the noticed developmental tendencies of the filling material based on gutta-percha. The whole body of literature proves the correctness of the research thesis that this material is the best currently that can be used in endodontics. Caries is one of the most common global infectious diseases. Since the dawn of humankind, the consequence of the disease has been the loss of dentition over time through dental extractions. Both tooth caries and tooth loss cause numerous complications and systemic diseases, which have a serious impact on insurance systems and on the well-being, quality, and length of human life. Endodontic treatment, which has been developing since 1836, is an alternative to tooth extraction. Based on an extensive literature review, the methodology of qualifying patients for endodontic treatment was analyzed. The importance of selecting filling material and techniques for the development and obturation of the root canal during endodontic treatment was described. Particular attention was paid to the materials science aspects and the sequence of phase transformations and precipitation processes, as well as the need to ensure the stoichiometric chemical composition of Ni–Ti alloys, and the vacuum metallurgical processes and material processing technologies for the effects of shape memory and superelasticity, which determine the suitability of tools made of this alloy for endodontic purposes. The phenomena accompanying the sterilization of such tools, limiting the relatively small number of times of their use, play an important role. The methods of root canal preparation and obturation methods through cold side condensation and thermoplastic methods, including the most modern of them, the thermo-hydraulic condensation (THC) technique, were analyzed. An important element of the research hypothesis was to prove the assumption that to optimize the technology of development and obturation of root canals, tests of filling effectiveness are identified by the density and size of the gaps between the root canal wall, and the filling methods used and devices appropriate for material research, using mainly microscopy such as light stereoscopic (LSM) and scanning electron (SEM). The most beneficial preparations were obtained by making a longitudinal breakthrough of 48 natural human teeth, extracted for medical reasons, different from caries, with compliance with all ethical principles in this field. The teeth were prepared using various methods and filled with multiple obturation techniques, using a virtual selection of experimental variants. The breakthroughs were made in liquid nitrogen after a one-sided incision with a narrow gap created by a diamond disc using a materialographic cutter. The best effectiveness of the root canal filling was ensured by the technology of preparing the root canals with K3 rotary nitinol tools and filling the teeth with the THC thermoplastic method using the System B and Obtura III devices with studs and pellets of filling material based on gutta-percha after covering the root canal walls with a thin layer of AH Plus sealant. In this way, the research thesis was confirmed.

Interdisciplinary treatment of a patient with amelogenesis imperfecta: Case report with a 35-year follow-up

OBJECTIVE

This case will illustrate the interdisciplinary management of an adolescent female patient with amelogenesis imperfecta (AI). It will contrast this approach and compare it to the previous "multidisciplinary" treatment rendered before the patient was referred for a second opinion.

CLINICAL CONSIDERATIONS

The patient had a family history of AI affecting all of her permanent teeth. There were many impacted teeth. The majority of her family and relatives afflicted by this opted for dentures. The patient had undergone 2 years of treatment and was told that her "braces would be removed next week." Her new dentist was concerned because the case was not ready to restore.

CONCLUSION

He recommended referral to another orthodontist for a second opinion and formulation of an interdisciplinary treatment plan that would include a periodontist, endodontist, and restorative dentist. The patient's family accepted the second opinion referral and restarted treatment with an interdisciplinary team. The restorative dentist was the quarterback for this integrated and sequenced approach. The case was ultimately restored. A 35 year follow-up shows stability with a caries free, periodontally healthy, esthetic result.

Virtual Approach to the Comparative Analysis of Biomaterials Used in Endodontic Treatment

The importance of endodontics is presented within our own concept of Dentistry Sustainable Development (DSD) consisting of three inseparable elements; i.e., Advanced Interventionist Dentistry 4.0 (AID 4.0), Global Dental Prevention (GDP), and the Dentistry Safety System (DSS) as a polemic, with the hypothesis of the need to abandon interventionist dentistry in favour of the domination of dental prevention. In view of the numerous systemic complications of caries that affect 3−5 billion people globally, endodontic treatment effectively counteracts them. Regardless of this, the prevention of oral diseases should be developed very widely, and in many countries dental care should reach the poorest sections of society. The materials and methods of clinical management in endodontic procedures are characterized. The progress in the field of filling materials and techniques for the development and obturation of root canals is presented. The endodontics market is forecast to reach USD 2.1 billion in 2026, with a CAGR of 4.1%. The most widely used and recognized material for filling root canals is gutta-percha, recognized as the “gold standard”. An alternative is a synthetic thermoplastic filler material based on polyester materials, known mainly under the trade name Resilon. There are still sceptical opinions about the need to replace gutta-percha with this synthetic material, and many dentists still believe that this material cannot compete with gutta-percha. The results of studies carried out so far do not allow for the formulation of a substantively and ethically unambiguous view that gutta-percha should be replaced with another material. There is still insufficient clinical evidence to formulate firm opinions in this regard. In essence, materials and technologies used in endodontics do not differ from other groups of materials, which justifies using material engineering methodology for their research. Therefore, a detailed methodological approach is presented to objectify the assessment of endodontic treatment. Theoretical analysis was carried out using the methods of procedural benchmarking and comparative analysis with the use of contextual matrices to virtually optimize the selection of materials, techniques for the development and obturation of root canals, and methods for assessing the effectiveness of filling, which methods are usually used, e.g., in management science, and especially in foresight research as part of knowledge management. The results of these analyses are presented in the form of appropriate context matrices. The full usefulness of the research on the effectiveness and tightness of root canal filling using scanning electron microscopy is indicated. The analysis results are a practical application of the so-called “digital twins” approach concerning the virtual comparative analysis of biomaterials used in endodontic treatment.

Tooth Loss and Blood Pressure in Parkinson's Disease Patients: An Exploratory Study on NHANES Data

Objectives: To evaluate tooth loss severity in PD patients and the impact of missing teeth on blood pressure (BP) and glycated hemoglobin (Hba1c) levels. Methods: All adults reporting specific PD medication regimens with complete dental examinations were included from the NHANES 2001 to 2018 databases. Sociodemographic, systolic BP (SBP), diastolic BP (DBP) and Hba1c data were compared according to tooth loss severity, and linear regression analyses on the impact of tooth loss on SBP, DBP and Hba1c levels were conducted. Results: The 214 included participants presented 9.7 missing teeth, 23.8% severe tooth loss and 18.2% total edentulousness. Severe tooth loss cases were significantly older (p < 0.001), had higher smoking prevalence (p = 0.008), chronic medical conditions (p = 0.012) and higher Hba1c (p = 0.001), SBP (p = 0.015) and DBP (p < 0.001) levels. Crude and adjusted linear models revealed a relationship between SBP, DBP and missing teeth; however, age confounded these links (SBP: B = 0.10, SE = 0.16, p < 0.05; DBP: B = 0.16, SE = 0.10, p < 0.05). Tooth loss presented no significant relationship with Hba1c levels. Conclusions: Severe tooth loss is prevalent among PD patients. Blood pressure levels showed a positive linear relationship with the number of missing teeth, although age was a confounding factor. Furthermore, tooth loss and Hba1c levels revealed no significant linear relationship.

The Effect of Patient Specific Factors on Occlusal Forces Generated: Best Evidence Consensus Statement

PURPOSE

The purpose of this Best Evidence Consensus Statement was to search the literature to determine if there is a relationship between patient specific factors and occlusal force.

MATERIALS AND METHODS

A literature review was conducted in the following databases: Evidence-Based Medicine Reviews (EBMR), Cochrane Database of Systematic Reviews, Embase, and Ovid MEDLINE(R) and Epub Ahead of Print. Articles on patient factors and occlusal force were compiled by using a combination of the key words: "bite force," "occlusal force," "partial and complete edentulism," "bruxism," and "orthognathic class." Inclusion criteria included meta-analyses, systematic reviews, randomized controlled trials, case series, and journal articles. Exclusion criteria were case reports, studies in children, animals, and bench studies.

RESULTS

Of the 1502 articles that met the initial search criteria, 97 related to patient-specific factors affecting occlusal forces. These articles were evaluated, rated, and organized into appropriate categories addressing questions of foci.

CONCLUSIONS

The range of occlusal force is highly variable among subjects correlated to patient specific factors such as age, gender, partial and complete edentulism, the presence of a maxillofacial defect, location of edentulous area, orthognathic profile, and magnitude of occlusal vertical dimension. Tooth replacement therapies targeted at increasing occlusal contact seem to have a positive effect on increasing occlusal force. Bruxism does not necessarily demonstrate higher occlusal powering but may have greater tooth contact time. Occlusal force is not clearly affected by the type of dental restoration or restorative material used. The clinical significance of the changes in occlusal forces is yet to be determined.

A digital approach to robust and esthetic implant overdenture construction

OBJECTIVE

Overdenture therapy is an important option for implant rehabilitation. However, numerous reports suggest that mechanical/technical complications and failures can limit therapeutic success. The goal of this report is to illustrate a digital approach to design and construction of a robust overdenture with high-esthetic value.

MATERIALS AND METHODS

Beginning with new denture design to establish esthetic parameters, 3D modeling of a metal framework and the denture teeth are completed in a connected manner. This enables connection of rapidly printed, prototype dentition that is attached directly to the framework without intervening wax or acrylic components. Following evaluation of the dentition and required adjustments, the final dentition is milled from resin and processed to the selective laser sintered framework.

RESULTS

The advantages of the digital workflow include the control of dimensions and strength of the framework, the esthetic relationship of the framework to the dentition and the facilitation of esthetic try-in of the dentition.

CONCLUSION

Enhancing a robust overdenture can be readily achieved using a digital workflow.

CLINICAL SIGNIFICANCE

The use of digital technology enables the clinical team to plan and produce prostheses with dimensions and contours that support long-term function and esthetics. The clinical chair time can be potentially reduced by use of digital design that facilitates try-in and reduces major errors by improved communication between the patient, dentist, and technician.

Efficacy of denture adhesives in complete denture wearers compared to denture wearers not using denture adhesives. A systematic review

AIM

The objective of this systematic review was to evaluate the efficacy of denture adhesives (DAs) in completely edentulous denture wearers compared to not using DAs.

METHODS AND RESULTS

PubMed, Web of Science, Cochrane Library, and EMBASE were searched from the database inception up to 6 February 2020 for Randomized Controlled Trials (RCTs) involving patients with complete dentures in both arches where the use of DAs was compared to no use of DAs. A total of 497 abstracts were reviewed, resulting in inclusion of 10 RCTs. Outcomes reported in the included trials were thoroughly reviewed and tabulated. The Cochrane risk of bias tool was used. All 10 studies were assessed at unclear (10%) or high risk of bias (90%). Studies showed DAs improved mainly retention/stability, and masticatory/chewing ability/performance, compared to no adhesives.

CONCLUSION

Most studies showed favorable results for DAs on retention and stability of complete dentures, masticatory performance, patient's comfort and satisfaction. Due to the heterogeneity of the outcomes, unclear/high risk of bias and small sample sizes, the quality of the evidence was very low. More high-quality research is needed with improved blinding and use of standardized methods to evaluate the efficacy of DAs.

The Concept of Sustainable Development of Modern Dentistry

This paper concerns the assessment of the current state of dentistry in the world and the prospects of its sustainable development. A traditional Chinese censer was adopted as the pattern, with a strong and stable support on three legs. The dominant diseases of the oral cavity are caries and periodontal diseases, with the inevitable consequence of toothlessness. From the caries 3.5–5 billion people suffer. Moreover, each of these diseases has a wide influence on the development of systemic complications. The territorial range of these diseases and their significant differentiation in severity in different countries and their impact on disability-adjusted life years index are presented (DALY). Edentulousness has a significant impact on the oral health-related quality of life (OHRQoL). The etiology of these diseases is presented, as well as the preventive and therapeutic strategies undertaken as a result of modifying the Deming circle through the fives’ rules idea. The state of development of Dentistry 4.0 is an element of the current stage of the industrial revolution Industry 4.0 and the great achievements of modern dental engineering. Dental treatment examples from the authors’ own clinical practice are given. The systemic safety of a huge number of dentists in the world is discussed, in place of the passive strategy of using more and more advanced personal protective equipment (PPE), introducing our own strategy for the active prevention of the spread of pathogenic microorganisms, including SARS-CoV-2. The ethical aspects of dentists’ activity towards their own patients and the ethical obligations of the dentist community towards society are discussed in detail. This paper is a polemic arguing against the view presented by a group of eminent specialists in the middle of last year in The Lancet. It is impossible to disagree with these views when it comes to waiting for egalitarianism in dental care, increasing the scope of prevention and eliminating discrimination in this area on the basis of scarcity and poverty. The views on the discrimination of dentistry in relation to other branches of medicine are far more debatable. Therefore, relevant world statistics for other branches of medicine are presented. The authors of this paper do not agree with the thesis that interventional dental treatment can be replaced with properly implemented prophylaxis. The final remarks, therefore, present a discussion of the prospects for the development of dentistry based on three pillars, analogous to the traditional Chinese censer obtaining a stable balance thanks to its three legs. The Dentistry Sustainable Development (DSD) > 2020 model, consisting of Global Dental Prevention (GDP), Advanced Interventionist Dentistry 4.0 (AID 4.0), and Dentistry Safety System (DSS), is presented.

Mandibular two-implant overdentures with CAD-CAM milled bars with distal extensions or retentive anchors: A randomized controlled trial

OBJECTIVE

This randomized controlled trial (RCT) aimed to demonstrate the non-inferiority of mandibular 2-implant overdentures (IODs) on a CAD-CAM milled bar with long distal extensions (MBDE) against IODs on retentive anchors (RA).

METHODS

Forty edentulous participants rehabilitated with a maxillary conventional denture and a mandibular 2-IOD participated in this trial. They were randomized into two groups [Control group (CG): RA + gold matrices; Experimental group (EG): MBDE + gold clip]. The outcomes included implant survival rate (ISR), chewing efficiency [quantitative (VoH) and subjective (SA) assessments], peri-implant marginal bone levels (PI-MBL), maximum bite force (MBF), and patient-reported outcomes [oral health impact profile (OHIP-EDENT), and denture satisfaction index (DSI)]. Outcomes were recorded at baseline (BL), two weeks (T₀ ), 6 months (T₁ ), and at 1 year (T₂ ) after the intervention. Intra- and inter-group analyses were performed using regression models with ⍺=0.05.

RESULTS

38 participants completed the T₂ visit (CG: n = 19, age = 74.7 ± 7.8 years; EG: n = 19, age = 70.3 ± 10.7 years). At T₂ , there was no implant loss in either of the groups (ISR = 100%). There were no significant differences between the groups for the PI-MBL changes (p = .754). Improvements occurred faster in the EG than in the CG, but over the observation time, there were no differences between the trial groups for VoH, MBF, OHIP-EDENT, and the DSI, except for SA being significantly better in the EG group (p = .022).

CONCLUSIONS

The results of this RCT confirm that mandibular 2-IODs with a CAD-CAM milled bar with long distal extensions are not an inferior treatment to the conventional IODs on retentive anchors in the short term (1 year).

Non-Antagonistic Contradictoriness of the Progress of Advanced Digitized Production with SARS-CoV-2 Virus Transmission in the Area of Dental Engineering

The general goals of advanced digitized production in the Industry 4.0 stage of the industrial revolution were presented along with the extended holistic model of Industry 4.0, introduced by the authors, indicating the importance of material design and the selection of appropriate manufacturing technology. The effect of the global lockdown caused by the SARS-CoV-2 virus transmission pandemic was a drastic decrease in production, resulting in a significant decrease in the gross domestic product GDP in all countries, and gigantic problems in health care, including dentistry. Dentists belong to the highest risk group because the doctor works in the patient’s respiratory tract. This paper presents a breakthrough authors solution, implemented by the active SPEC strategy, and aims to eliminate clinical aerosol at the source by negative pressure aspirating bioaerosol at the patient’s mouth line. The comparative benchmarking analysis and its results show that only the proprietary solution with a set of devices eliminates the threat at the source, while the remaining known methods do not meet the expectations. The details of this solution are described. Photopolymer materials and additive Digital Light Printing (DLP) technology were used.

Coexistence of Lack of Clinical Manifestation of Oral Mycosis and Systemic Diseases in Edentulous Patients Using Removable Prosthetic Restorations

OBJECTIVE

It is believed that oral infections can increase the risk of systematic diseases, such as atherosclerosis and coronary heart disease, stroke, chronic obstructive pulmonary disease, diabetes, cancer, rheumatoid arthritis, etc. It seems that oral invasive pathogens induce a systemic inflammatory response via mediators released by the cardiovascular system and liver, which increases the risk to the patient of these systematic infections, such as hypertension. On the basis of previous studies of the stomatognathic system, investigating the coexistence of systemic diseases and inflammation in the oral cavity, it can be expected that there is a connection between inflammation of the denture-bearing area in patients using acrylic removable dentures and the presence of systemic diseases, and that patients with inflammation in oral mucosa are more likely to have systemic diseases.

MATERIAL AND METHOD

A retrospective study was carried out on a group of patients seeking prosthetic treatment at the Prosthetic Department of the University Dental Clinic (UKS) from March 2012 to February 2013. All data were collected using a UKS electronic database with KS-SOMED. The minimum period of use for removable prostheses was five years.

RESULTS

According to anamnesis, the most common systemic diseases in our study group were hypertension disease. In total, 58% of patients with hypertension disease had no inflammation in the oral cavity.

CONCLUSIONS

The occurrence of systemic diseases in edentulous people using removable prosthetic restorations, and the subsequent use of medications for these diseases, may result in a lack of clinical symptoms of concomitant fungal infection of the oral mucosa.

Mandibular implant-supported fixed complete dental prostheses on implants with ultrashort and standard length: A pilot treatment

Edentulous patients may be restored with complete-arch implant-supported fixed complete dental prostheses (IFCDPs) on angled distal implants or on parallel implants distributed equally across the mandible to increase the area of support. A treatment is presented to introduce the clinical concept of providing edentulous patients with an implant-supported fixed complete dental prosthesison parallel tissue-level implants in the mandible with standard length implants interforaminally and ultrashort implants distally. A structured prosthetic approach was used for the tooth arrangement with a modified workflow as per the Biofunctional Prosthetic System adapted for static computer-aided implant surgery (s-CAIS) and computer-aided design and computer-aided manufacturing (CAD-CAM) of the screw-retained implant-supported fixed complete dental prosthesis. The concept offered advantages in challenging anatomic, surgical, and prosthetic conditions; providing distal nonangled abutments and implant platforms, which were straightforward to clean. If necessary, the prosthesis could have been easily converted into a removable overdenture using the existing digital prosthetic arrangement. Should implant removal be required, the extrashort implants can be removed with minimal surgical risk or morbidity.

Relationship of periodontitis and edentulism to angiographically diagnosed coronary artery disease: A cross-sectional study

OBJECTIVE

The objective of the study is to examine the connection between oral status and the extent of coronary artery disease (CAD), which is diagnosed by angiography.

BACKGROUND

Periodontitis and tooth loss have been linked to atherosclerosis and CAD in previous studies. However, no distinct connection was revealed due to the diversity of the results and the variety of diagnostic methods. To provide a more consistent data pool and stronger evidence, there is a need for studies with standard measurements and diagnostic criteria.

METHODS

309 patients, who consulted to Ankara University, Faculty of Medicine, Department of Cardiology and had coronary angiography, were enrolled to this study. Individuals were grouped based on their coronary angiography results, as CAD (+) (n = 233) and CAD (-) (n = 76). Studied parameters included cardiovascular risk factors, plaque index (PI), remaining teeth count, bleeding on probing (BOP), and probing pocket depth (PPD). Periapical radiographs were taken from teeth with ≥4 mm PPD. Oral status was categorized as periodontally healthy subjects/patients with gingivitis (Group 1), patients with periodontitis (Group 2), and edentulous subjects (Group 3).

RESULTS

PI (P < 0.001), PPD (P = 0.001), BOP (P = 0.004), the number of patients with less than 10 teeth (P = 0.014), and edentulism (P = 0.009) were significantly higher in CAD (+) patients, who were mostly older (P < 0.001) and male (P < 0.001). Multivariate logistic regression analysis revealed that Group 2 (odds ratio = 2.48, 95% confidence interval = 1.24-4.95, P = 0.010) and Group 3 (odds ratio = 2.01, 95% confidence interval = 1.14-5.17, P = 0.040) were highly associated with CAD. Two and three stenosed vessels were significantly higher in Groups 2 and 3 compared to Group 1 (P = 0.003).

CONCLUSIONS

It was found that both edentulism and periodontitis were related to CAD.

Titanium implant surface properties enhance osseointegration in ovariectomy induced osteoporotic rats without pharmacologic intervention

OBJECTIVES

This study determined whether implant surfaces that promote osseointegration in normal rats can promote osseointegration in osteoporotic rats without pharmacologic intervention.

MATERIALS AND METHODS

Virgin female 8-month-old CD Sprague Dawley rats (N = 25) were ovariectomized. At 6 weeks, microstructured/non-nanostructured/hydrophobic, microstructured/nanostructured/hydrophobic, or microstructured/nanostructured/hydrophilic Ti implants (Ø2.5 × 3.5 mm; Institut Straumann AG, Basel, Switzerland) were placed in the distal metaphysis of each femur. At 28 days, bone quality and implant osseointegration were assessed using microCT, histomorphometrics, and removal torque values (RTVs). Calvarial osteoblasts were isolated and cultured for 7 days on Ø15 mm Ti disks processed to exhibit similar surface characteristics as the implants used for the in vivo studies. The phenotype was assessed by measuring the production of osteocalcin, osteoprotegerin, osteopontin, BMP2, VEGF, and RANKL.

RESULTS

Microstructured/nanostructured/hydrophilic implants promoted increased bone-to-implant contact and RTVs in vivo and increased osteoblastic marker production in vitro compared to microstructured/non-nanostructured/hydrophobic and microstructured/nanostructured/hydrophobic implants, suggesting that osseointegration occurs in osteoporotic animals, and implant surface properties improve its rate.

CONCLUSIONS

Although all modified implants were able to osseointegrate in rats with OVX-induced osteoporosis without pharmacologic intervention, the degree of osseointegration was greater around microstructured/nanostructured/hydrophilic implant surfaces. These results suggest that when appropriate microstructure is present, hydrophilicity has a greater influence on Ti implant osseointegration compared to nanostructures. Moreover, modified implant surfaces can exert their control over the altered bone turnover observed in osteoporotic patients to stimulate functional osseointegration. These results provide critical insight for developing implants with improved osseointegration in patients with metabolic disorders of bone remodeling.

Oral health and access to dental care among older homeless adults: results from the HOPE HOME study

OBJECTIVES

To describe the prevalence of and factors associated with oral health measures in a sample of older homeless adults in Oakland, CA.

METHODS

We conducted a cross-sectional analysis of data from a population-based study of 350 homeless adults aged ≥50 in which trained researchers conducted structured interviews using validated questions regarding sociodemographics, health-related behaviors, healthcare utilization, and health status. We assessed self-reported tooth loss, oral pain, and unmet need for dental care. We used multivariable logistic regression to examine factors associated with missing half or more teeth.

RESULTS

Over half 201/350 (57.4 percent) of participants were missing at least half of their teeth. Half 191/350 (54.6 percent) reported oral pain in the past 6 months; 101/350 (28.9 percent) reported that oral pain prevented them from eating and 73/350 (20.9 percent) reported that pain prevented sleeping. Almost half, 141/350 (40.3 percent), had not seen a dentist in over 5 years, and over half 190/350 (54.3 percent) reported being unable to obtain needed dental care. In multivariate models, increased age (AOR = 1.09, 95 percent CI 1.04-1.14), moderate-to-high risk alcohol use (AOR = 2.17, CI = 1.23-3.84), moderate-to-high risk cocaine use (AOR = 1.72, CI = 1.03-2.88), and ever smoking (AOR = 2.87, CI = 1.59-5.18) were associated with an increased odds of having lost half or more teeth.

CONCLUSIONS

Tooth loss and oral pain are highly prevalent in older homeless adults. Increasing age, alcohol, drug, and tobacco use are associated with tooth loss.

Effectiveness of Ball Attachment Systems in Implant Retained- and Supported-Overdentures: A Three- to Five-Year Retrospective Examination

Purpose: To evaluate implant and prosthetic survival rates, complications, patient satisfaction, and biological outcomes of patients rehabilitated with a ball attachment system for implant retained- and supported-overdentures (IOV), which was in function for 3 to 5 years. Methods: This retrospective study evaluated data collected from patients treated between April 2001 and May 2018 with IOV on splinted and non-splinted implants and a ball attachment system. Patients were followed for 36 to 206 months (mean follow-up was 128.1 ± 51.9 months). Data were collected at the 3- and 5-year follow-up examination. Outcome measures were implant and prosthetic survival rates, technical complications, marginal bone loss (MBL), oral health impact profile (OHIP), and periodontal parameters (bleeding on probing and plaque index). Results: A total of 46 patients (16 males and 30 females) with 124 implants were included in this study. Twenty-five implant-retained overdentures were delivered on 53 unsplinted implants, while the other 21 patients received an implant-supported overdentures and the implants were splinted. At the five-year follow-up examination, one implant and one prosthesis failed in the unsplinted group, resulting in a cumulative survival rate of 97.8% at the patient level. Two minor technical complications were experienced. Conclusions: Implant overdenture retained or supported by ball attachment systems showed high implant and prosthetic survival and success rates. A low number of complications, high patient satisfaction, and successful biological parameters were experienced in the mid-term follow-up. Data need to be confirmed by further randomized trials.

Patient's oral health-related quality of life and satisfaction with implant supported overdentures -a systematic review

Purpose

This systematic review was done to find the patients oral health-related quality of life (OHRQoL) and satisfaction with implant supported overdentures (IODs) when compared to conventional complete dentures (CCDs).

Materials and methods

To identify suitable literature, an electronic search was performed using Medline/PubMed and Cochrane databases. Manual search of Prosthodontics, Gerodontology and journals related to dental implants were also done. Articles published in English and articles whose abstract is available in English were included. The search was focused on patient's oral health-related quality of life and satisfaction with IODs when compared to CCDs.Titles and abstracts were screened, and literature that fulfilled the inclusion criteria was selected for a full-text reading.

Results

Initial literature search resulted in 1803 papers, 1779 were excluded after screenings of the abstracts by the reviewers which resulted in 24 studies. 5 studies were further excluded due to not fulfilling the inclusion criteria, 2 additional articles included after hand searching, resulting in total 21 articles in systematic review. The result suggests that mandibular CCDs had less retention as compared to maxillary conventional dentures CCDs, which improved drastically with IODs and provides a better oral health-related quality of life and satisfaction to the patients.

Conclusion

Retention, stability, comfort, speech and chewing efficiency improved drastically with IODs, with enhanced patient's satisfaction and a better OHRQoL. Patients reported more satisfaction and OHRQoL with mandibular IOD when compared CCDs.

Topology optimization of fixed complete denture framework

The functionality of a denture is directly related to the quality of life of the edentulous patients because treatment failure results in demoralizing consequences including difficulties in oral activities. Framework for fixed complete dentures plays a crucial role by transferring loads from the denture to the implants, which are integrated into the remaining bones and gingiva, thereby providing stability to the denture. Current techniques utilize 3D scan data of the implant site to capture the locations and soft tissue contours to design customized framework using computer-aided design (CAD) and computer-aided manufacturing (CAM) technology to properly support the denture teeth in their position. The performance and efficiency of these frameworks may be enhanced by incorporating a design optimization in the design process. We tested the feasibility of using the topology optimization to design patient-specific dental frameworks. The shapes of the optimized frameworks may be significantly different from the traditional designs, but better structural integrity is likely to be achieved with potentially less material. The numerical study reveals that commercially available dental framework would experience 16% less maximum stress when topology optimized even with a compliance minimization formulation with 50% volume fraction constraint. Topology optimization for designing dental frameworks might improve current clinical methods and provide better long-term patient satisfaction.

A prospective cohort study on survival and success of one-piece mini-implants with associated changes in oral function: Five-year outcomes

OBJECTIVE

To investigate in a prospective cohort study the 5-year post-loading survival and success of one-piece mini dental implants (MDIs) in edentulous subjects with mandibular implant overdentures (IODs) and to report the associated changes of oral function with respect to patient age.

MATERIALS AND METHODS

Independently living edentulous patients were recruited and provided with new complete dentures. After an adaptation period, four one-piece MDIs (diameter 1.8 mm) were installed in the interforaminal region and immediately loaded. At baseline pre-operative (BL), as well as at 1-year and 5-year follow-up examinations, chewing efficiency was assessed with a validated color-mixing ability test and maximum voluntary bite force (MBF) was recorded with a digital force gauge. Implant survival and success were evaluated at 5-year follow-up. Non-parametric tests served to analyze the differences between time points.

RESULTS

Twenty patients participated in the study (5 men and 15 women; age at BL: n = 10 ≤ 65 years and n = 10 > 65 years). All patients were available for a 5-year follow-up (n = 2 in their long-term care facility; n = 1 only by telephone). The survival and success rates were both 100% after 61 ± 5.7 months. Chewing efficiency did not change over the first year (p = 0.167), but was improved at 5 year fup (n = 19) compared to baseline (p = 0.033) and to 1 year (p < 0.001). The MBF (n = 19 at 5-year follow-up) increased continuously over time (p < 0.001), but was less pronounced in the older cohort (p = 0.009).

CONCLUSIONS

Mini dental implants seem to be a successful treatment option for edentulous elderly patients with very high survival and success rates, and serve to improve long-term oral function.

Management of Edentulous Patients

Edentulism, defined as the complete loss of all dentition, is a worldwide phenomenon. Edentulism occurs because of biologic disease processes, such as dental caries, periodontal diseases, trauma, and oral cancer. Edentulism is accompanied by several comorbidities that can significantly influence an individual. Although the rate of edentulism is declining, the number of edentulous patients continues to rise because of the increase in population. The management of edentulous patient has been addressed since the early days of dentistry. This article describes complete dentures and their maintenance, and advanced technology in complete dentures, and in implant-retained and implant-supported prosthesis.

Comparative study of risk indicators associated with tooth loss among adult population in urban and rural areas of Muradnagar, Ghaziabad, Uttar Pradesh, India

Background:

Oral health objectives prescribed by World Health Organization for the year 2020 have expressed that there ought to be an expansion in the quantity of people with functional dentitions (at least 21 common teeth) at ages of 35–44 and 65–74 years.

Aim:

The aim of this study is to examine the prevalence of tooth loss and to evaluate and compare the risk indicators associated with tooth loss among adult population in urban and rural areas of Muradnagar, Ghaziabad.

Materials and Methods:

A cross-sectional study was led among 1200 adults aged 35–74 years in urban and rural areas of Muradnagar, India. Information was assembled by an interview followed by clinical examination (number of missing teeth). Demographic and socioeconomic factors and self-perceived oral health were the independent variables assessed. One-way analysis of variance, post-hoc test (Bonferroni), Chi-square test, Student's t-test, and logistic regression analysis were used for statistical analysis.

Results:

Low educational status, no dental check-ups, low frequency of brushing, older age, and smoking habit were independent risk factors for tooth loss. The odds of tooth loss in older adults and illiterates were higher; the odds for tooth loss among those who expressed their desire for replacement of missing teeth were 1.3 times lower than their counterparts.

Conclusion:

The experiences gained up showed that tooth loss was very pervasive in Muradnagar populace and the critical hazard indicators identified were age, education, socioeconomic status, and cigarette smoking.

Interventions for replacing missing teeth: attachment systems for implant overdentures in edentulous jaws

BACKGROUND

Implant overdentures are one of the most common treatment options used to rehabilitate edentulous patients. Attachment systems are used to anchor the overdentures to implants. The plethora of attachment systems available dictates a need for clinicians to understand their prosthodontic and patient-related outcomes.

OBJECTIVES

To compare different attachment systems for maxillary and mandibular implant overdentures by assessing prosthodontic success, prosthodontic maintenance, patient preference, patient satisfaction/quality of life and costs.

SEARCH METHODS

Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 24 January 2018); Cochrane Central Register of Controlled Trials (CENTRAL; 2017, Issue 12) in the Cochrane Library (searched 24 January 2018); MEDLINE Ovid (1946 to 24 January 2018); and Embase Ovid (1980 to 24 January 2018). The US National Institutes of Health Trials Registry (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials on 24 January 2018. No restrictions were placed on the language or date of publication when searching the electronic databases.

SELECTION CRITERIA

All randomised controlled trials (RCTs), including cross-over trials on maxillary or mandibular implant overdentures with different attachment systems with at least 1 year follow-up.

DATA COLLECTION AND ANALYSIS

Four review authors extracted data independently and assessed risk of bias for each included trial. Several corresponding authors were subsequently contacted to obtain missing information. Fixed-effect meta-analysis was used to combine the outcomes with risk ratios (RR) for dichotomous outcomes and mean differences (MD) for continuous outcomes, with 95% confidence intervals (95% CI). We used the GRADE approach to assess the quality of evidence and create 'Summary of findings' tables.

MAIN RESULTS

We identified six RCTs with a total of 294 mandibular overdentures (including one cross-over trial). No trials on maxillary overdentures were eligible. Due to the poor reporting of the outcomes across the included trials, only limited analyses between mandibular overdenture attachment systems were possible.Comparing ball and bar attachments, upon pooling the data regarding short-term prosthodontic success, we identified substantial heterogeneity (I² = 97%) with inconsistency in the direction of effect, which was unexplained by clinical or methodological differences between the studies, and accordingly we did not perform meta-analyses for this outcome. Short-term re-treatment (repair of attachment system) was higher with ball attachments (RR 3.11, 95% CI 1.68 to 5.75; 130 participants; 2 studies; very low-quality evidence), and there was no difference between both attachment systems in short-term re-treatment (replacement of attachment system) (RR 1.18, 95% CI 0.38 to 3.71; 130 participants; 2 studies; very low-quality evidence). It is uncertain whether there is a difference in short-term prosthodontic success when ball attachments are compared with bar attachments.Comparing ball and magnet attachments, there was no difference between them in medium-term prosthodontic success (RR 0.84, 95% CI 0.64 to 1.10; 69 participants; 1 study; very low-quality evidence), or in medium-term re-treatment (repair of attachment system) (RR 1.75, 95% CI 0.65 to 4.72; 69 participants; 1 study; very low-quality evidence). However, after 5 years, prosthodontic maintenance costs were higher when magnet attachments were used (MD -247.37 EUR, 95% CI -346.32 to -148.42; 69 participants; 1 study; very low-quality evidence). It is uncertain whether there is a difference in medium-term prosthodontic success when ball attachments are compared with magnet attachments.One trial provided data for ball versus telescopic attachments and reported no difference in prosthodontic maintenance between the two systems in short-term patrix replacement (RR 6.00, 95% CI 0.86 to 41.96; 22 participants; 1 study; very low-quality evidence), matrix activation (RR 11.00, 95% CI 0.68 to 177.72; 22 participants; 1 study; very low-quality evidence), matrix replacement (RR 1.75, 95% CI 0.71 to 4.31; 22 participants; 1 study; very low-quality evidence), or in relining of the implant overdenture (RR 2.33, 95% CI 0.81 to 6.76; 22 participants; 1 study; very low-quality evidence). It is uncertain whether there is a difference in short-term prosthodontic maintenance when ball attachments are compared with telescopic attachments.In the only cross-over trial included, patient preference between different attachment systems was assessed after only 3 months and not for the entire trial period of 10 years.

AUTHORS' CONCLUSIONS

For mandibular overdentures, there is insufficient evidence to determine the relative effectiveness of different attachment systems on prosthodontic success, prosthodontic maintenance, patient satisfaction, patient preference or costs. In the short term, there is some evidence that is insufficient to show a difference and where there was no evidence was reported. It was not possible to determine any preferred attachment system for mandibular overdentures.For maxillary overdentures, there is no evidence (with no trials identified) to determine the relative effectiveness of different attachment systems on prosthodontic success, prosthodontic maintenance, patient satisfaction, patient preference or costs.Further RCTs on edentulous cohorts must pay attention to trial design specifically using the same number of implants of the same implant system, but with different attachment systems clearly identified in control and test groups. Trials should also determine the longevity of different attachment systems and patient preferences. Trials on the current array of computer-aided designed/computer-assisted manufactured (CAD/CAM) bar attachment systems are encouraged.

Implant-Supported PMMA Monolithic Full-Arch Rehabilitation with Surgical Computer-Planned Guide and Immediate Provisional: A Case Report with One Year Follow-Up

The aim of this case report is to describe the surgical and prosthetic procedures to achieve maxillary and mandibular implant-supported PMMA monolithic full-arch rehabilitation (PMFR) with surgical computer-planned guide and immediate provisional. In such cases, the correct planning of dental implants' position, length, and diameter and the prosthetic phases via computer-aided design are very important to achieve good aesthetic and functional long-lasting results.

Bar versus ball attachments for implant-supported overdentures in complete edentulism: A systematic review

BACKGROUND

Implant-supported overdenture is one of the most predictable treatment options used in complete edentulism. However, differences have been reported between bar and ball attachments used to retain overdentures in terms of patient satisfaction and prosthesis retention.

PURPOSE

The purpose of this study is to compare the effectiveness of bar and ball attachments for conventionally loaded implant-supported overdentures in completely edentulous patients to improve patient satisfaction and prosthesis retention.

MATERIALS AND METHODS

We conducted the review according to the Cochrane methods and following MECIR standards. We searched Cochrane Oral Health Group Trial register, Cochrane Central Register of Controlled Trials, MEDLINE, and the WHO ICTRP (March 31, 2017). Two review authors assessed trials for inclusion and risk of bias, extracted data, and checked for accuracy. We have expressed results as risk ratio or mean differences, together with their 95% confidence intervals.

RESULTS

We included 10 trials (465 participants). After 5 y, one trial reported higher patient satisfaction when bar attachment was used (MD 1.30, 95% CI 0.20-2.40), and reported no difference between both systems in prosthesis retention (MD -0.90, 95% CI -1.90 to 0.10). Two trials reported no implant failures after 1 and 5 y in both attachments. Downgrading of evidence was based on the unclear risk of bias of included studies and the wide CI crossing the line of no effect.

CONCLUSIONS

There is insufficient evidence to support bar or ball attachment to be used with implant-supported overdentures in completely edentulous patients to improve patient satisfaction and prosthesis retention (PROSPERO 2014:CRD42014014594).

Obstructive Sleep Apnea and Neurocognitive Dysfunction in Edentulous Patients

PURPOSE

To record the incidence of cognitive dysfunction in edentulous patients suffering from obstructive sleep apnea (OSA) and establish a plausible hypothesis to explain the correlation of cognitive dysfunction and OSA.

MATERIALS AND METHODS

In this study, 315 edentulous patients (aged 60 to 65 years) visiting the outpatient department at Saraswati Dental College, Lucknow were recruited from January 2013 to October 2015. Prosthodontic Diagnostic Index (PDI) classification was used to assess the intraoral condition to relate it with the span of edentulousness. The BERLIN questionnaire and Epworth Sleepiness Scales were used to diagnose sleep-disordered breathing, following which the patients were put through all-night polysomnography. The apnea-hypopnea index (AHI) scores were derived. Mild and moderate OSA patients were classified into mild, moderate, and severe cognitive dysfunction based on SGRQ-C and SCD. Data were tabulated according to a new classification (Cognitive Dysfunction of Dental Sleep Medicine Patients [CDDSMP] Classification) designed specifically for this study. Data were analyzed using SPSS v15.0. Scores were tabulated as mean ± SD and median [IQR] values. Change from baseline was analyzed using Wilcoxon signed rank test.

RESULTS

Mean scores at different time intervals were 3.03 ± 1.76 (3 months), 2.98 ± 1.80 (6 months), and 2.81 ± 1.84 (9 months). The median [IQR] values of scores at all time intervals except 9 months were 3 [1 to 5]. At 9 months, median [IQR] was 2 [1 to 5]. A significant change in scores was observed in the 3-month interval (p ≤ 0.001).

CONCLUSIONS

The severity of OSA and neurocognitive dysfunction could be directly related to the PDI classification and the span of edentulousness of the patient and modified mandibular advancement device treatment significantly improved the patients' condition, which was reflective from 3 months post-intervention itself.