Advancing secondary metabolite biosynthesis in yeast with synthetic biology tools

Combined metabolic engineering and lipid droplets degradation to increase vitamin A production in Saccharomyces cerevisiae

BACKGROUND

In microbial cell factories, substrate accessibility to enzyme is a key factor affecting the biosynthesis of natural products. As a robust chassis cells for biofuels and bioproducts, Saccharomyces cerevisiae also encounters the challenge since different enzymes and precursors are typically compartmentalized in different organelles. Such spatial separation could largely limit the efficiency of enzymatic reactions. In this study, the production of the hydrophobic product (vitamin A) was highly improved by metabolic engineering combined with degrading lipid droplets (the primary organelle storing β-carotene) to achieve efficient contact between β-carotene and 15, 15'-β-carotene monooxygenases in Saccharomyces cerevisiae.

RESULTS

To efficiently produce vitamin A in Saccharomyces cerevisiae, ten 15, 15'-β-carotene monooxygenases (BCMOs) were firstly evaluated. The strain carrying marine bacterium 66A03 (Mb. BCMO) achieved the highest vitamin A titer. Co-adding 10% dodecane and 1% dibutylhydroxytoluene increased vitamin A titer to 19.03 mg/L in two-phase fermentation. Since most β-carotene is stored in LDs while BCMO is located in the cytosol, we developed a strategy to release β-carotene from LDs to better contact with BCMO. By overexpressing TGL3 and TGL4 using an ion-responsive promoter after high accumulation of β-carotene in LDs, LDs were sequentially degraded, which dramatically improved vitamin A production. Finally, by overexpressing tHMG1, ERG20, and CrtI and introducing Vitreoscilla hemoglobin, vitamin A titer reached 219.27 mg/L, which was a 10.52-folds increase over the original strain in shake flasks, and finally reached 1100.83 mg/L in fed-batch fermentation. The effectiveness of LDs degradation on promoting the formation of β-carotene cleaved product has also been verified in β-ionone synthesis with 44.07% increased yield.

CONCLUSIONS

Overall, our results highlighted the significance of sequential degrading LDs on vitamin A overproduction in recombinant yeast, and verified that combining metabolic and LDs engineering is an efficient strategy to improve vitamin A production. This integrated strategy can be applied to the overproduction of other hydrophobic compounds with similar characteristics.

Strangers in a foreign land: 'Yeastizing' plant enzymes

Expressing plant metabolic pathways in microbial platforms is an efficient, cost-effective solution for producing many desired plant compounds. As eukaryotic organisms, yeasts are often the preferred platform. However, expression of plant enzymes in a yeast frequently leads to failure because the enzymes are poorly adapted to the foreign yeast cellular environment. Here, we first summarize the current engineering approaches for optimizing performance of plant enzymes in yeast. A critical limitation of these approaches is that they are labour-intensive and must be customized for each individual enzyme, which significantly hinders the establishment of plant pathways in cellular factories. In response to this challenge, we propose the development of a cost-effective computational pipeline to redesign plant enzymes for better adaptation to the yeast cellular milieu. This proposition is underpinned by compelling evidence that plant and yeast enzymes exhibit distinct sequence features that are generalizable across enzyme families. Consequently, we introduce a data-driven machine learning framework designed to extract 'yeastizing' rules from natural protein sequence variations, which can be broadly applied to all enzymes. Additionally, we discuss the potential to integrate the machine learning model into a full design-build-test cycle.

Enhancing Withanolide Production in the Withania Species: Advances in In Vitro Culture and Synthetic Biology Approaches

Withanolides are naturally occurring steroidal lactones found in certain species of the Withania genus, especially Withania somnifera (commonly known as Ashwagandha). These compounds have gained considerable attention due to their wide range of therapeutic properties and potential applications in modern medicine. To meet the rapidly growing demand for withanolides, innovative approaches such as in vitro culture techniques and synthetic biology offer promising solutions. In recent years, synthetic biology has enabled the production of engineered withanolides using heterologous systems, such as yeast and bacteria. Additionally, in vitro methods like cell suspension culture and hairy root culture have been employed to enhance withanolide production. Nevertheless, one of the primary obstacles to increasing the production of withanolides using these techniques has been the intricacy of the biosynthetic pathways for withanolides. The present article examines new developments in withanolide production through in vitro culture. A comprehensive summary of viable traditional methods for producing withanolide is also provided. The development of withanolide production in heterologous systems is examined and emphasized. The use of machine learning as a potent tool to model and improve the bioprocesses involved in the generation of withanolide is then discussed. In addition, the control and modification of the withanolide biosynthesis pathway by metabolic engineering mediated by CRISPR are discussed.

De Novo Synthesis of Chrysin in Saccharomyces cerevisiae

Chrysin, a flavonoid, has been found to have been widely used in the health food field. But at present, chrysin production is hindered by the low availability of precursors and the lack of catalytic enzymes with high activity. Therefore, ZmPAL was initially screened to synthesize trans-cinnamic acid with high catalytic activity and specificity. To enhance the supply of precursors, the shikimic acid and chorismic acid pathway genes were overexpressed. Besides, the expression of the intracellular and mitochondrial carbon metabolism genes CIT, MAC1/3, CTP1, YHM2, RtME, and MDH was enhanced to increase the intracellular acetyl-CoA content. Chrysin was synthesized through a novel gene combination of ScCPR-EbFNSI-1 and PcFNSI. Finally, de novo synthesis of chrysin was achieved, reaching 41.9 mg/L, which is the highest reported concentration to date. In summary, we identified efficient enzymes for chrysin production and increased it by regulating acetyl-CoA metabolism in mitochondria and the cytoplasm, laying a foundation for future large-scale production.

Enhancing (2S)-naringenin production in Saccharomyces cerevisiae by high-throughput screening method based on ARTP mutagenesis

(2S)-Naringenin, a dihydro-flavonoid, serves as a crucial precursor for flavonoid synthesis due to its extensive medicinal values and physiological functions. A pathway for the synthesis of (2S)-naringenin from glucose has previously been constructed in Saccharomyces cerevisiae through metabolic engineering. However, this synthetic pathway of (2S)-naringenin is lengthy, and the genes involved in the competitive pathway remain unknown, posing challenges in significantly enhancing (2S)-naringenin production through metabolic modification. To address this issue, a novel high-throughput screening (HTS) method based on color reaction combined with a random mutagenesis method called atmospheric room temperature plasma (ARTP), was established in this study. Through this approach, a mutant (B7-D9) with a higher titer of (2S)-naringenin was obtained from 9600 mutants. Notably, the titer was enhanced by 52.3% and 19.8% in shake flask and 5 L bioreactor respectively. This study demonstrates the successful establishment of an efficient HTS method that can be applied to screen for high-titer producers of (2S)-naringenin, thereby greatly improving screening efficiency and providing new insights and solutions for similar product screenings.

Saccharomyces cerevisiae biofactory to produce naringenin using a systems biology approach and a bicistronic vector expression strategy in flavonoid production

IMPORTANCE

Flavonoids are a group of compounds generally produced by plants with proven biological activity, which have recently beeen recommended for the treatment and prevention of diseases and ailments with diverse causes. In this study, naringenin was produced in adequate amounts in yeast after in silico design. The four genes of the involved enzymes from several organisms (bacteria and plants) were multi-expressed in two vectors carrying each two genes linked by a short viral peptide sequence. The batch kinetic behavior of the product, substrate, and biomass was described at lab scale. The engineered strain might be used in a more affordable and viable bioprocess for industrial naringenin procurement.

Effect of Apigenin on Neurodegenerative Diseases

Neurodegenerative diseases (NDDs), such as Alzheimer's and Parkinson's, are the most frequent age-related illnesses affecting millions worldwide. No effective medication for NDDs is known to date and current disease management approaches include neuroprotection strategies with the hope of maintaining and improving the function of neurons. Such strategies will not provide a cure on their own but are likely to delay disease progression by reducing the production of neurotoxic chemicals such as reactive oxygen species (ROS) and related inflammatory chemicals. Natural compounds such as flavonoids that provide neuroprotection via numerous mechanisms have attracted much attention in recent years. This review discusses evidence from different research models and clinical trials on the therapeutic potential of one promising flavonoid, apigenin, and how it can be helpful for NDDs in the future prospects. We have also discussed its chemistry, mechanism of action, and possible benefits in various examples of NDDs.

Engineering yeast for the production of plant terpenoids using synthetic biology approaches

Covering: 2011-2022The low amounts of terpenoids produced in plants and the difficulty in synthesizing these complex structures have stimulated the production of terpenoid compounds in microbial hosts by metabolic engineering and synthetic biology approaches. Advances in engineering yeast for terpenoid production will be covered in this review focusing on four directions: (1) manipulation of host metabolism, (2) rewiring and reconstructing metabolic pathways, (3) engineering the catalytic activity, substrate selectivity and product specificity of biosynthetic enzymes, and (4) localizing terpenoid production via enzymatic fusions and scaffolds, or subcellular compartmentalization.

Cutaneotrichosporon curvatum and Yarrowia lipolytica as key players for green chemistry: efficient oil producers from food waste via the carboxylate platform

Cutaneotrichosporon curvatum and Yarrowia lipolytica can accumulate microbial oils using short-chain fatty acids (SCFA) as carbon sources. SCFAs-rich media often contain significant amounts of nitrogen that prevent high carbon:nitrogen (C:N) ratios necessary to boost lipid production. This work assessed the intrinsic ability of C. curvatum and Y. lipolytica to produce high amounts of microbial oils from these unusual carbon sources. Results demonstrated that minor differences in SCFA concentration (only 2 g/L) had a significant effect on yeast growth and lipid production. A C:N of 80 promoted yeast growth at all SCFA concentrations and favored SCFA consumption at 19 g/L SCFAs. The different SCFA uptake preferences in C. curvatum and Y. lipolytica highlighted the importance of considering the SCFA profile to select a suitable yeast strain for microbial oils production. At the most challenging SCFA concentration (19 g/L), 57.2% ±1.6% (w/w) and 78.4 ± 0.6% (w/w) lipid content were obtained in C. curvatum and Y. lipolytica, respectively. These values are among the highest reported for wild-type strains. To circumvent the challenges associated with media with high nitrogen content, this report also proved struvite precipitation as an effective method for increasing lipid production (from 17.9 ± 3.9% (w/w) to 41.9 ± 2.6% (w/w)) after nitrogen removal in food waste-derived media.

In Silico Analysis of the Dextransucrase Obtained From Leuconostoc mesenteroides Strain IBUN 91.2.98

The DSR-IBUN dextransucrase produced by Leuconostoc mesenteroides strain IBUN 91.2.98 has a short production time (4.5 hours), an enzymatic activity of 24.8 U/mL, and a specific activity of purified enzyme 2 times higher (331.6 U/mg) than that reported for similar enzymes. The aim of this study was to generate a structural model that, from an in silico approach, allows a better understanding, from the structural point of view, of the activity obtained by the enzyme of interest, which is key to continue with its study and industry application. For this, we translated the nucleotide sequence of the dsr_IBUN gene. With the primary structure of DSR-IBUN, the in silico prediction of physicochemical parameters, the possible subcellular localization, the presence of signal peptide, and the location of domains and functional and structural motifs of the protein were established. Subsequently, its secondary and tertiary structure were predicted and a homology model of the dextransucrase under study was constructed using Swiss-Model, performing careful template selection. The values obtained for the model, Global Model Quality Estimation (0.63), Quality Mean (-1.49), and root-mean-square deviation (0.09), allow us to affirm that the model for the enzyme dextransucrase DSR-IBUN is of adequate quality and can be used as a source of information for this protein.

Xylose and shikimate transporters facilitates microbial consortium as a chassis for benzylisoquinoline alkaloid production

Plant-sourced aromatic amino acid (AAA) derivatives are a vast group of compounds with broad applications. Here, we present the development of a yeast consortium for efficient production of (S)-norcoclaurine, the key precursor for benzylisoquinoline alkaloid biosynthesis. A xylose transporter enables the concurrent mixed-sugar utilization in Scheffersomyces stipitis, which plays a crucial role in enhancing the flux entering the highly regulated shikimate pathway located upstream of AAA biosynthesis. Two quinate permeases isolated from Aspergillus niger facilitates shikimate translocation to the co-cultured Saccharomyces cerevisiae that converts shikimate to (S)-norcoclaurine, resulting in the maximal titer (11.5 mg/L), nearly 110-fold higher than the titer reported for an S. cerevisiae monoculture. Our findings magnify the potential of microbial consortium platforms for the economical de novo synthesis of complex compounds, where pathway modularization and compartmentalization in distinct specialty strains enable effective fine-tuning of long biosynthetic pathways and diminish intermediate buildup, thereby leading to increases in production.

Metabolic Engineering of Pichia pastoris for High-Level Production of Lycopene

Lycopene is widely used in cosmetics, food, and nutritional supplements. Microbial production of lycopene has been intensively studied. However, few metabolic engineering studies on Pichia pastoris have been aimed at achieving high-yield lycopene production. In this study, the CRISPR/Cpf1-based gene repression system was developed and the gene editing system was optimized, which were applied to improve lycopene production successfully. In addition, the sterol regulatory element-binding protein SREBP (Sre) was used for the regulation of lipid metabolic pathways to promote lycopene overproduction in P. pastoris for the first time. The final engineered strain produced lycopene at 7.24 g/L and 75.48 mg/g DCW in fed-batch fermentation, representing the highest lycopene yield in P. pastoris reported to date. These findings provide effective strategies for extended metabolic engineering assisted by the CRISPR/Cpf1 system and new insights into metabolic engineering through transcriptional regulation of related metabolic pathways to enhance carotenoid production in P. pastoris.

Uses of Multi-Objective Flux Analysis for Optimization of Microbial Production of Secondary Metabolites

Secondary metabolites are not essential for the growth of microorganisms, but they play a critical role in how microbes interact with their surroundings. In addition to this important ecological role, secondary metabolites also have a variety of agricultural, medicinal, and industrial uses, and thus the examination of secondary metabolism of plants and microbes is a growing scientific field. While the chemical production of certain secondary metabolites is possible, industrial-scale microbial production is a green and economically attractive alternative. This is even more true, given the advances in bioengineering that allow us to alter the workings of microbes in order to increase their production of compounds of interest. This type of engineering requires detailed knowledge of the "chassis" organism's metabolism. Since the resources and the catalytic capacity of enzymes in microbes is finite, it is important to examine the tradeoffs between various bioprocesses in an engineered system and alter its working in a manner that minimally perturbs the robustness of the system while allowing for the maximum production of a product of interest. The in silico multi-objective analysis of metabolism using genome-scale models is an ideal method for such examinations.

Metabolic Engineering of Saccharomyces cerevisiae for Vitamin B5 Production

Vitamin B5, also called d-pantothenic acid, is an essential vitamin in the human body and is widely used in pharmaceuticals, nutritional supplements, food, and cosmetics. However, few studies have investigated the microbial production of d-pantothenic acid, especially in Saccharomyces cerevisiae. By employing a systematic optimization strategy, we screened seven key genes in d-pantothenic acid biosynthesis from diverse species, including bacteria, yeast, fungi, algae, plants, animals, etc., and constructed an efficient heterologous d-pantothenic acid pathway in S. cerevisiae. By adjusting the copy number of the pathway modules, knocking out the endogenous bypass gene, balancing NADPH utilization, and regulating the GAL inducible system, a high-yield d-pantothenic acid-producing strain, DPA171, which can regulate gene expression using glucose, was constructed. By optimizing fed-batch fermentation, DPA171 produced 4.1 g/L d-pantothenic acid, which is the highest titer in S. cerevisiae to date. This study provides guidance for the development of vitamin B5 microbial cell factories.

Biosynthesis of monoterpenoid and sesquiterpenoid as natural flavors and fragrances

Terpenoids are a large class of plant-derived compounds, that constitute the main components of essential oils and are widely used as natural flavors and fragrances. The biosynthesis approach presents a promising alternative route in terpenoid production compared to plant extraction or chemical synthesis. In the past decade, the production of terpenoids using biotechnology has attracted broad attention from both academia and the industry. With the growing market of flavor and fragrance, the production of terpenoids directed by synthetic biology shows great potential in promoting future market prospects. Here, we reviewed the latest advances in terpenoid biosynthesis. The engineering strategies for biosynthetic terpenoids were systematically summarized from the enzyme, metabolic, and cellular dimensions. Additionally, we analyzed the key challenges from laboratory production to scalable production, such as key enzyme improvement, terpenoid toxicity, and volatility loss. To provide comprehensive technical guidance, we collected milestone examples of biosynthetic mono- and sesquiterpenoids, compared the current application status of chemical synthesis and biosynthesis in terpenoid production, and discussed the cost drivers based on the data of techno-economic assessment. It is expected to provide critical insights into developing translational research of terpenoid biomanufacturing.

Assembly of Metabolons in Yeast Using Cas6-Mediated RNA Scaffolding

Cells often localize pathway enzymes in close proximity to reduce substrate loss via diffusion and to ensure that carbon flux is directed toward the desired product. To emulate this strategy for the biosynthesis of heterologous products in yeast, we have taken advantage of the highly specific Cas6-RNA interaction and the predictability of RNA hybridizations to demonstrate Cas6-mediated RNA-guided protein assembly within the yeast cytosol. The feasibility of this synthetic scaffolding technique for protein localization was first demonstrated using a split luciferase reporter system with each part fused to a different Cas6 protein. In Saccharomyces cerevisiae, the luminescence signal increased 3.6- to 20-fold when the functional RNA scaffold was also expressed. Expression of a trigger RNA, designed to prevent the formation of a functional scaffold by strand displacement, decreased the luminescence signal by nearly 2.3-fold. Temporal control was also possible, with induction of scaffold expression resulting in an up to 11.6-fold increase in luminescence after 23 h. Cas6-mediated assembly was applied to create a two-enzyme metabolon to redirect a branch of the violacein biosynthesis pathway. Localizing VioC and VioE together increased the amount of deoxyviolacein (desired) relative to prodeoxyviolacein (undesired) by 2-fold. To assess the generality of this colocalization method in other yeast systems, the split luciferase reporter system was evaluated in Kluyveromyces marxianus; RNA scaffold expression resulted in an increase in the luminescence signal of up to 1.9-fold. The simplicity and flexibility of the design suggest that this strategy can be used to create metabolons in a wide range of recombinant hosts of interest.

Discovery of a gene cluster for the biosynthesis of novel cyclic peptide compound, KK-1, in Curvularia clavata

KK-1, a cyclic depsipeptide with 10 residues produced by a filamentous fungus Curvularia clavata BAUA-2787, is a promising pesticide active compound with high activity against many plant pathogens, especially Botrytis cinerea. As a first step toward the future mass production of KK-1 through synthetic biological approaches, we aimed to identify the genes responsible for the KK-1 biosynthesis. To achieve this, we conducted whole genome sequencing and transcriptome analysis of C. clavata BAUA-2787 to predict the KK-1 biosynthetic gene cluster. We then generated the overexpression and deletion mutants for each cluster gene using our originally developed transformation system for this fungus, and analyzed the KK-1 production and the cluster gene expression levels to confirm their involvement in KK-1 biosynthesis. As a result of these, a region of approximately 71 kb was found, containing 10 open reading frames, which were co-induced during KK-1 production, as a biosynthetic gene cluster. These include kk1B, which encodes nonribosomal peptide synthetase with a domain structure that is consistent with the structural features of KK-1, and kk1F, which encodes a transcription factor. The overexpression of kk1F increased the expression of the entire cluster genes and, consequently, improved KK-1 production, whereas its deletion decreased the expression of the entire cluster genes and almost eliminated KK-1 production, demonstrating that the protein encoded by kk1F regulates the expressions of the other nine cluster genes cooperatively as the pathway-specific transcription factor. Furthermore, the deletion of each cluster gene caused a reduction in KK-1 productivity, indicating that each gene is involved in KK-1 production. The genes kk1A, kk1D, kk1H, and kk1I, which showed a significant decrease in KK-1 productivity due to deletion, were presumed to be directly involved in KK-1 structure formation, including the biosynthesis of the constituent residues. kk1C, kk1E, kk1G, and kk1J, which maintained a certain level of KK-1 productivity despite deletion, were possibly involved in promoting or assisting KK-1 production, such as extracellular transportation and the removal of aberrant units incorporated into the peptide chain.

Metabolic recycling of storage lipids promotes squalene biosynthesis in yeast

BACKGROUND

Metabolic rewiring in microbes is an economical and sustainable strategy for synthesizing valuable natural terpenes. Terpenes are the largest class of nature-derived specialized metabolites, and many have valuable pharmaceutical or biological activity. Squalene, a medicinal terpene, is used as a vaccine adjuvant to improve the efficacy of vaccines, including pandemic coronavirus disease 2019 (COVID-19) vaccines, and plays diverse biological roles as an antioxidant and anticancer agent. However, metabolic rewiring interferes with inherent metabolic pathways, often in a way that impairs the cellular growth and fitness of the microbial host. In particular, as the key starting molecule for producing various compounds including squalene, acetyl-CoA is involved in numerous biological processes with tight regulation to maintain metabolic homeostasis, which limits redirection of metabolic fluxes toward desired products.

RESULTS

In this study, focusing on the recycling of surplus metabolic energy stored in lipid droplets, we show that the metabolic recycling of the surplus energy to acetyl-CoA can increase squalene production in yeast, concomitant with minimizing the metabolic interferences in inherent pathways. Moreover, by integrating multiple copies of the rate-limiting enzyme and implementing N-degron-dependent protein degradation to downregulate the competing pathway, we systematically rewired the metabolic flux toward squalene, enabling remarkable squalene production (1024.88 mg/L in a shake flask). Ultimately, further optimization of the fed-batch fermentation process enabled remarkable squalene production of 6.53 g/L.

CONCLUSIONS

Our demonstration of squalene production via engineered yeast suggests that plant- or animal-based supplies of medicinal squalene can potentially be complemented or replaced by industrial fermentation. This approach will also provide a universal strategy for the more stable and sustainable production of high-value terpenes.

Versatile tools of synthetic biology applied to drug discovery and production

Although synthetic biology is an emerging research field, which has come to prominence within the last decade, it already has many practical applications. Its applications cover the areas of pharmaceutical biotechnology and drug discovery, bringing essential novel methods and strategies such as metabolic engineering, reprogramming the cell fate, drug production in genetically modified organisms, molecular glues, functional nucleic acids and genome editing. This review discusses the main avenues for synthetic biology application in pharmaceutical biotechnology. The authors believe that synthetic biology will reshape drug development and drug production to a similar extent as the advances in organic chemical synthesis in the 20th century. Therefore, synthetic biology already plays an essential role in pharmaceutical, biotechnology, which is the main focus of this review.

Yeast Genomics and Its Applications in Biotechnological Processes: What Is Our Present and Near Future?

Since molecular biology and advanced genetic techniques have become important tools in a variety of fields of interest, including taxonomy, identification, classification, possible production of substances and proteins, applications in pharmacology, medicine, and the food industry, there has been significant progress in studying the yeast genome and its potential applications. Because of this potential, as well as their manageability, safety, ease of cultivation, and reproduction, yeasts are now being extensively researched in order to evaluate a growing number of natural and sustainable applications to provide many benefits to humans. This review will describe what yeasts are, how they are classified, and attempt to provide a rapid overview of the many current and future applications of yeasts. The review will then discuss how yeasts—including those molecularly modified—are used to produce biofuels, proteins such as insulin, vaccines, probiotics, beverage preparations, and food additives and how yeasts could be used in environmental bioremediation and biocontrol for plant infections. This review does not delve into the issues raised during studies and research, but rather presents the positive outcomes that have enabled several industrial, clinical, and agricultural applications in the past and future, including the most recent on cow-free milk.

Conversion of banana peel into diverse valuable metabolites using an autochthonous Rhodotorula mucilaginosa strain

Low-cost substrates are an exciting alternative for bioprocesses; however, their complexity can affect microorganism metabolism with non-desirable outcomes. This work evaluated banana peel extract (BPE) as a growth medium compared to commercial Yeast-Malt (YM) broth in the native and non-conventional yeast Rhodotorula mucilaginosa UANL-001L. The production of carotenoids, fatty acids, and exopolysaccharides (EPS) was also analyzed. Biomass concentration (3.9 g/L) and growth rate (0.069 g/h) of Rhodotorula mucilaginosa UANL-001L were obtained at 200 g/L of BPE. Yields per gram of dry biomass for carotenoids (317 µg/g) and fatty acids (0.55 g/g) showed the best results in 150 g/L of BPE, while 298 µg/g and 0.46 mg/g, respectively, were obtained in the YM broth. The highest yield of EPS was observed in 50 g/L of BPE, a two-fold increase (160.1 mg/g) compared to the YM broth (76.3 mg/g). The fatty acid characterization showed that 100 g/L of BPE produced 400% more unsaturated compounds (e.g., oleic and ricinoleic acid) than the YM broth. Altogether, these results indicate that BPE is a suitable medium for producing high-value products with potential industrial applications.

Identification of (-)-bornyl diphosphate synthase from Blumea balsamifera and its application for (-)-borneol biosynthesis in Saccharomyces cerevisiae

Borneol is a precious monoterpenoid with two chiral structures, (-)-borneol and (+)-borneol. Bornyl diphosphate synthase is the key enzyme in the borneol biosynthesis pathway. Many (+)-bornyl diphosphate synthases have been reported, but no (-)-bornyl diphosphate synthases have been identified. Blumea balsamifera leaves are rich in borneol, almost all of which is (-)-borneol. In this study, we identified a high-efficiency (-)-bornyl diphosphate synthase (BbTPS3) from B. balsamifera that converts geranyl diphosphate (GPP) to (-)-bornyl diphosphate, which is then converted to (-)-borneol after dephosphorylation in vitro. BbTPS3 exhibited a K_m value of 4.93 ± 1.38 μM for GPP, and the corresponding k_cat value was 1.49 s⁻¹. Multiple strategies were applied to obtain a high-yielding (-)-borneol producing yeast strain. A codon-optimized BbTPS3 protein was introduced into the GPP high-yield strain MD, and the resulting MD-B1 strain produced 1.24 mg·L^-1 (-)-borneol. After truncating the N-terminus of BbTPS3 and adding a Kozak sequence, the (-)-borneol yield was further improved by 4-fold to 4.87 mg·L^-1. Moreover, the (-)-borneol yield was improved by expressing the fusion protein module of ERG20^F96W-N127W-YRSQI-t14-BbTPS3K2, resulting in a final yield of 12.68 mg·L^-1 in shake flasks and 148.59 mg·L^-1 in a 5-L bioreactor. This work is the first reported attempt to produce (-)-borneol by microbial fermentation.

Host-mycobiome metabolic interactions in health and disease

Fungal communities (mycobiome) have an important role in sustaining the resilience of complex microbial communities and maintenance of homeostasis. The mycobiome remains relatively unexplored compared to the bacteriome despite increasing evidence highlighting their contribution to host-microbiome interactions in health and disease. Despite being a small proportion of the total species, fungi constitute a large proportion of the biomass within the human microbiome and thus serve as a potential target for metabolic reprogramming in pathogenesis and disease mechanism. Metabolites produced by fungi shape host niches, induce immune tolerance and changes in their levels prelude changes associated with metabolic diseases and cancer. Given the complexity of microbial interactions, studying the metabolic interplay of the mycobiome with both host and microbiome is a demanding but crucial task. However, genome-scale modelling and synthetic biology can provide an integrative platform that allows elucidation of the multifaceted interactions between mycobiome, microbiome and host. The inferences gained from understanding mycobiome interplay with other organisms can delineate the key role of the mycobiome in pathophysiology and reveal its role in human disease.

Developing fungal heterologous expression platforms to explore and improve the production of natural products from fungal biodiversity

Natural products from fungi represent an important source of biologically active metabolites notably for therapeutic agent development. Genome sequencing revealed that the number of biosynthetic gene clusters (BGCs) in fungi is much larger than expected. Unfortunately, most of them are silent or barely expressed under laboratory culture conditions. Moreover, many fungi in nature are uncultivable or cannot be genetically manipulated, restricting the extraction and identification of bioactive metabolites from these species. Rapid exploration of the tremendous number of cryptic fungal BGCs necessitates the development of heterologous expression platforms, which will facilitate the efficient production of natural products in fungal cell factories. Host selection, BGC assembly methods, promoters used for heterologous gene expression, metabolic engineering strategies and compartmentalization of biosynthetic pathways are key aspects for consideration to develop such a microbial platform. In the present review, we summarize current progress on the above challenges to promote research effort in the relevant fields.

Optogenetic strategies for the control of gene expression in yeasts

Optogenetics involves the use of light to control cellular functions and has become increasingly popular in various areas of research, especially in the precise control of gene expression. While this technology is already well established in neurobiology and basic research, its use in bioprocess development is still emerging. Some optogenetic switches have been implemented in yeasts for different purposes, taking advantage of a wide repertoire of biological parts and relatively easy genetic manipulation. In this review, we cover the current strategies used for the construction of yeast strains to be used in optogenetically controlled protein or metabolite production, as well as the operational aspects to be considered for the scale-up of this type of process. Finally, we discuss the main applications of optogenetic switches in yeast systems and highlight the main advantages and challenges of bioprocess development considering future directions for this field.

Saccharomyces cerevisiae as host for the recombinant production of polyketides and nonribosomal peptides

As a robust, fast growing and genetically tractable organism, the budding yeast Saccharomyces cerevisiae is one of the most widely used hosts in biotechnology. Its applications range from the manufacturing of vaccines and hormones to bulk chemicals and biofuels. In recent years, major efforts have been undertaken to expand this portfolio to include structurally complex natural products, such as polyketides and nonribosomally synthesized peptides. These compounds often have useful pharmacological properties, which make them valuable drugs for the treatment of infectious diseases, cancer, or autoimmune disorders. In nature, polyketides and nonribosomal peptides are generated by consecutive condensation reactions of short chain acyl-CoAs or amino acids, respectively, with the substrates and reaction intermediates being bound to large, multidomain enzymes. For the reconstitution of these multistep catalytic processes, the enzymatic assembly lines need to be functionally expressed and the required substrates must be supplied in reasonable quantities. Furthermore, the production hosts need to be protected from the toxicity of the biosynthetic products. In this review, we will summarize and evaluate the status quo regarding the heterologous production of polyketides and nonribosomal peptides in S. cerevisiae. Based on a comprehensive literature analysis, prerequisites for a successful pathway reconstitution could be deduced, as well as recurring bottlenecks in this microbial host.

Exploring the potential of engineering polygalacturonase-inhibiting protein as an ecological, friendly, and nontoxic pest control agent

In plants, polygalacturonase-inhibiting proteins (PGIPs) play critical roles for resistance to fungal disease by inhibiting the pectin-depolymerizing activity of endopolygalacturonases (PGs), one type of enzyme secreted by pathogens that compromises plant cell walls and leaves the plant susceptible to disease. Here, the interactions between PGIPs from Phaseolus vulgaris (PvPGIP1 and PvPGIP2) and PGs from Aspergillus niger (AnPG2), Botrytis cinerea (BcPG1 and BcPG2), and Fusarium moniliforme (FmPG3) were reconstituted through a yeast two hybrid (Y2H) system to investigate the inhibition efficiency of various PvPGIP1 and 2 truncations and mutants. We found that tPvPGIP2_5-8, which contains LRR5 to LRR8 and is only one-third the size of the full length peptide, exhibits the same level of interactions with AnPG and BcPGs as the full length PvPGIP2 via Y2H. The inhibitory activities of tPvPGIP2_5-8 on the growth of A. niger and B. cinerea were then examined and confirmed on pectin agar. On pectin assays, application of both full length PvPGIP2 and tPvPGIP2_5-8 clearly slows down the growth of A. niger and B. cinerea. Investigation on the sequence-function relationships of PGIP utilizing a combination of site directed mutagenesis and a variety of peptide truncations suggests that LRR5 could have the most essential structural feature for the inhibitory activities, and may be a possible target for the future engineering of PGIP with enhanced activity. This study highlights the potential of plant-derived PGIPs as a candidate for future in planta evaluation as a pest control agent.

Microbial engineering to produce fatty alcohols and alkanes

Owing to their high energy density and composition, fatty acid-derived chemicals possess a wide range of applications such as biofuels, biomaterials, and other biochemical, and as a consequence, the global annual demand for products has surpassed 2 million tons. With the exhausting petroleum reservoirs and emerging environmental concerns on using petroleum feedstock, it has become indispensable to shift to a renewable-based industry. With the advancement in the field of synthetic biology and metabolic engineering, the use of microbes as factories for the production of fatty acid-derived chemicals is becoming a promising alternative approach for the production of these derivatives. Numerous metabolic approaches have been developed for conditioning the microbes to improve existing or develop new methodologies capable of efficient oleochemical production. However, there still exist several limitations that need to be addressed for the commercial viability of the microbial cell factory production. Though substantial advancement has been made toward successfully producing these fatty acids derived chemicals, a considerable amount of work needs to be done for improving the titers. In the present review, we aim to address the roadblocks impeding the heterologous production, the engineering pathway strategies implemented across the range of microbes in a detailed manner, and the commercial readiness of these molecules of immense application.

Engineering G protein-coupled receptor signalling in yeast for biotechnological and medical purposes

G protein-coupled receptors (GPCRs) comprise the largest class of membrane proteins in the human genome, with a common denominator of seven-transmembrane domains largely conserved among eukaryotes. Yeast is naturally armoured with three different GPCRs for pheromone and sugar sensing, with the pheromone pathway being extensively hijacked for characterising heterologous GPCR signalling in a model eukaryote. This review focusses on functional GPCR studies performed in yeast and on the elucidated hotspots for engineering, and discusses both endogenous and heterologous GPCR signalling. Key emphasis will be devoted to studies describing important engineering parameters to consider for successful coupling of GPCRs to the yeast mating pathway. We also review the various means of applying yeast for studying GPCRs, including the use of yeast armed with heterologous GPCRs as a platform for (i) deorphanisation of orphan receptors, (ii) metabolic engineering of yeast for production of bioactive products and (iii) medical applications related to pathogen detection and drug discovery. Finally, this review summarises the current challenges related to expression of functional membrane-bound GPCRs in yeast and discusses the opportunities to continue capitalising on yeast as a model chassis for functional GPCR signalling studies.

Expression of Two Key Enzymes of Artemisinin Biosynthesis FPS and ADS genes in Saccharomyces cerevisiae

Purpose: Artemisinin, a secondary metabolite in Artemisia annua is one of primary choice for the treatment of malaria, it is naturally produced in low concentration from this plant. This study was aimed to clone key enzymes of artemisinin production in order to enhance its production through the semi-synthetically production in Saccharomyces cerevisiae. Methods: Two key enzymes in artemisinin biosynthetic pathway which are farnesyl phosphate synthase (fps) and amorpha-4,11-diene synthase (ads) genes were transformed into S. cerevisiae using pBEVY vector. Successful transformation was checked by polymerase chain reaction (PCR) method and sequencing analysis Results: Recombinant plasmids which are pBEVY-GU_ads and pBEVY_GL_fps were successfully constructed. The optimized ads gene was amplified using PCR with a couple of primers that are designed in order to provide the homolog recombination between ads gene with the expression plasmid of pBEVY-GU respectively. While the A. annua optimized fps gene was cloned using classical method. Transformants were grown in selective media Synthetic Defined (SD) without leucine for transformants contain plasmid pBEVY-GL_fps and media without uracil for transformants contain plasmid pBEVY-GU_ads. Confirmation of colonies was done by PCR with primers to amplify fps and ads. DNA from yeast was isolated from positive colonies then transformed to E. coli. Plasmid from E. coli was isolated for restriction analysis and sequencing. Protein expression was induced by cultivating the yeast in the media with 2% galactose. Conclusion: Based on PCR, restriction and sequencing analysis, it could be concluded that fps and ads genes were successfully constructed, transformed and expressed in S. cerevisiae.

Developing a Yeast Platform Strain for an Enhanced Taxadiene Biosynthesis by CRISPR/Cas9

Paclitaxel is an important diterpenoid commonly used as an anticancer drug. Although the paclitaxel biosynthetic pathway has been mostly revealed, some steps remain to be elucidated. The difficulties in plant transformations and the scarcity of the precursor of paclitaxel, (+)-taxa-4(5), 11(12)-diene (taxadiene), have hindered the full comprehension of paclitaxel biochemistry and, therefore, its production by biotechnological approaches. One solution is to use the budding yeast, Saccharomyces cerevisiae, as a platform to elucidate the paclitaxel biosynthesis. As taxadiene is a diterpenoid, its common precursor, geranylgeranyl pyrophosphate (GGPP), needs to be increased in yeast. In this study, we screened various GGPP synthases (GGPPS) to find the most suitable GGPPS for taxadiene production in yeast. We also optimized the taxadiene production by increasing the flux toward the terpenoid pathway. Finally, to remove selection markers, we integrated the required genes using a CRISPR/Cas9 system in the yeast genome. Our result showed that a titer of 2.02 ± 0.40 mg/L (plasmid) and 0.41 ± 0.06 mg/L (integrated) can be achieved using these strategies. This platform strain can be used to readily test the gene candidates for microbial paclitaxel biosynthesis in the future.

Successful Enzyme Colocalization Strategies in Yeast for Increased Synthesis of Non-native Products

Yeast cell factories, particularly Saccharomyces cerevisiae, have proven valuable for the synthesis of non-native compounds, ranging from commodity chemicals to complex natural products. One significant challenge has been ensuring sufficient carbon flux to the desired product. Traditionally, this has been addressed by strategies involving "pushing" and "pulling" the carbon flux toward the products by overexpression while "blocking" competing pathways via downregulation or gene deletion. Colocalization of enzymes is an alternate and complementary metabolic engineering strategy to control flux and increase pathway efficiency toward the synthesis of non-native products. Spatially controlling the pathway enzymes of interest, and thus positioning them in close proximity, increases the likelihood of reaction along that pathway. This mini-review focuses on the recent developments and applications of colocalization strategies, including enzyme scaffolding, construction of synthetic organelles, and organelle targeting, in both S. cerevisiae and non-conventional yeast hosts. Challenges with these techniques and future directions will also be discussed.

Multiplex Genome Editing in Yeast by CRISPR/Cas9 - A Potent and Agile Tool to Reconstruct Complex Metabolic Pathways

Numerous important pharmaceuticals and nutraceuticals originate from plant specialized metabolites, most of which are synthesized via complex biosynthetic pathways. The elucidation of these pathways is critical for the applicable uses of these compounds. Although the rapid progress of the omics technology has revolutionized the identification of candidate genes involved in these pathways, the functional characterization of these genes remains a major bottleneck. Baker's yeast (Saccharomyces cerevisiae) has been used as a microbial platform for characterizing newly discovered metabolic genes in plant specialized metabolism. Using yeast for the investigation of numerous plant enzymes is a streamlined process because of yeast's efficient transformation, limited endogenous specialized metabolism, partially sharing its primary metabolism with plants, and its capability of post-translational modification. Despite these advantages, reconstructing complex plant biosynthetic pathways in yeast can be time intensive. Since its discovery, CRISPR/Cas9 has greatly stimulated metabolic engineering in yeast. Yeast is a popular system for genome editing due to its efficient homology-directed repair mechanism, which allows precise integration of heterologous genes into its genome. One practical use of CRISPR/Cas9 in yeast is multiplex genome editing aimed at reconstructing complex metabolic pathways. This system has the capability of integrating multiple genes of interest in a single transformation, simplifying the reconstruction of complex pathways. As plant specialized metabolites usually have complex multigene biosynthetic pathways, the multiplex CRISPR/Cas9 system in yeast is suited well for functional genomics research in plant specialized metabolism. Here, we review the most advanced methods to achieve efficient multiplex CRISPR/Cas9 editing in yeast. We will also discuss how this powerful tool has been applied to benefit the study of plant specialized metabolism.

Current Challenges and Opportunities in Non-native Chemical Production by Engineered Yeasts

Yeasts are promising industrial hosts for sustainable production of fuels and chemicals. Apart from efficient bioethanol production, yeasts have recently demonstrated their potential for biodiesel production from renewable resources. The fuel-oriented product profiles of yeasts are now expanding to include non-native chemicals with the advances in synthetic biology. In this review, current challenges and opportunities in yeast engineering for sustainable production of non-native chemicals will be discussed, with a focus on the comparative evaluation of a bioethanol-producing Saccharomyces cerevisiae strain and a biodiesel-producing Yarrowia lipolytica strain. Synthetic pathways diverging from the distinctive cellular metabolism of these yeasts guide future directions for product-specific engineering strategies for the sustainable production of non-native chemicals on an industrial scale.

‘Cannabis’ ontologies I: Conceptual issues with Cannabis and cannabinoids terminology

Objective

Identify a coherent nomenclature for Cannabis sativa L. derived products and their analogues.

Design

Research undertaken in parallel to the three-year assessment of Cannabis derivatives by the World Health Organisation. The scope is limited to Cannabis products intended for human incorporation (internal and topical consumption). Primarily embedded in pharmacognosy, the study incorporates a wide range of scholarly and grey literature, folk knowledge, archives, pharmacopœias, international law, field pharmacy, clinical and herbal medicine data, under a philosophical scrutiny. Generic and Cannabis-specific nomenclatural frames are compared to determine the extent to which they coincide or conflict.

Results

All lexica reviewed use weak, ambiguous, or inconsistent terms. There is insufficient scientific basis for terms and concepts related to Cannabis at all levels. No sound classification exists: current models conflict by adopting idiosyncratic, partial, outdated, or utilitarian schemes to arrange the extraordinarily numerous and diverse derivatives of the C. sativa plant. In law and policy, no clear or unequivocal boundary between herbal and non-herbal drugs, nor natural and synthetic cannabinoids was found; current nomenclatures need updates. In science, the botanical Cannabis lexicon overlooks parthenocarpy, and wide disagreement remains as to the taxonomy and systematics of the plant; chemical research should address differences in kinds between synthetic cannabinoids; pharmacopœias include little information related to Cannabis, and disagree on broader classes of herbal medicines, virtually failing to embrace many known Cannabis medicines. Since existing products and compounds fail to be categorised in an evidence-based manner, confusions will likely increase as novel cannabinoid compounds, genetic and biotechnological modifications surge.

Conclusions

The lack of clarity is comprehensive: for patients, physicians, and regulators. This study proposes an update of terms at several levels. It points at gaps in morphological descriptions in botany and pharmacognosy and a need for a metaphysical address of cannabinoids. Methods of obtention are identified as a common criterion to distinguish products; the way forward suggests a mutually exclusive nomenclatural pattern based on the smallest common denominator of obtention methods. In the context of a swelling number of Cannabis products being consumed (be it via medical prescription, adult-use, ‘hemp’ foodstuff and cosmetics, or other purposes), this study can assist research, contribute to transparent labelling of products, consumer safety and awareness, pharmacovigilance, medical standards of care, and an update of prevention and harm reduction approaches. It can also better inform regulatory policies surrounding C. sativa, its derivatives, and other cannabinoid-containing products.

Connecting moss lipid droplets to patchoulol biosynthesis

Plant-derived terpenoids are extensively used in perfume, food, cosmetic and pharmaceutical industries, and several attempts are being made to produce terpenes in heterologous hosts. Native hosts have evolved to accumulate large quantities of terpenes in specialized cells. However, heterologous cells lack the capacity needed to produce and store high amounts of non-native terpenes, leading to reduced growth and loss of volatile terpenes by evaporation. Here, we describe how to direct the sesquiterpene patchoulol production into cytoplasmic lipid droplets (LDs) in Physcomitrium patens (syn. Physcomitrella patens), by attaching patchoulol synthase (PTS) to proteins linked to plant LD biogenesis. Three different LD-proteins: Oleosin (PpOLE1), Lipid Droplet Associated Protein (AtLDAP1) and Seipin (PpSeipin325) were tested as anchors. Ectopic expression of PTS increased the number and size of LDs, implying an unknown mechanism between heterologous terpene production and LD biogenesis. The expression of PTS physically linked to Seipin increased the LD size and the retention of patchoulol in the cell. Overall, the expression of PTS was lower in the anchored mutants than in the control, but when normalized to the expression the production of patchoulol was higher in the seipin-linked mutants.

Enlarging Knowledge on Lager Beer Volatile Metabolites Using Multidimensional Gas Chromatography

Foodomics, emergent field of metabolomics, has been applied to study food system processes, and it may be useful to understand sensorial food properties, among others, through foods metabolites profiling. Thus, as beer volatile components represent the major contributors for beer overall and peculiar aroma properties, this work intends to perform an in-depth profiling of lager beer volatile metabolites and to generate new data that may contribute for molecules’ identification, by using multidimensional gas chromatography. A set of lager beers were used as case-study, and 329 volatile metabolites were determined, distributed over 8 chemical families: acids, alcohols, esters, monoterpenic compounds, norisoprenoids, sesquiterpenic compounds, sulfur compounds, and volatile phenols. From these, 96 compounds are reported for the first time in the lager beer volatile composition. Around half of them were common to all beers under study. Clustering analysis allowed a beer typing according to production system: macro- and microbrewer beers. Monoterpenic and sesquiterpenic compounds were the chemical families that showed wide range of chemical structures, which may contribute for the samples’ peculiar aroma characteristics. In summary, as far as we know, this study presents the most in-depth lager beer volatile composition, which may be further used in several approaches, namely, in beer quality control, monitoring brewing steps, raw materials composition, among others.

Yeast as a promising heterologous host for steroid bioproduction

With the rapid development of synthetic biology and metabolic engineering technologies, yeast has been generally considered as promising hosts for the bioproduction of secondary metabolites. Sterols are essential components of cell membrane, and are the precursors for the biosynthesis of steroid hormones, signaling molecules, and defense molecules in the higher eukaryotes, which are of pharmaceutical and agricultural significance. In this mini-review, we summarize the recent engineering efforts of using yeast to synthesize various steroids, and discuss the structural diversity that the current steroid-producing yeast can achieve, the challenge and the potential of using yeast as the bioproduction platform of various steroids from higher eukaryotes.

Transfer of Nitrogen Fixation (nif) Genes to Non-diazotrophic Hosts

Nitrogen is one of the most important nutrients for plant growth. To enhance crop productivity, chemical nitrogen fertilizer is commonly applied in agriculture. Biological nitrogen fixation, the conversion of atmospheric N2 to NH3 , is an important source of nitrogen input in agriculture and represents a promising substitute for chemical nitrogen fertilizers. However, nitrogen fixation is only sporadically distributed within bacteria and archaea (diazotrophs). Thus, many biologists hope to reconstitute a nitrogenase biosynthetic pathway in a eukaryotic host, with the final aim of developing N2 -fixing cereal crops. With the advent of synthetic biology and a deep understanding of the fundamental genetic determinants necessary to sustain nitrogen fixation in bacteria, much progress has been made toward this goal. Transfer of native and refactored nif (nitrogen fixation) genes to non-diazotrophs has been attempted in model bacteria, yeast, and plants. Specifically, nif genes from Klebsiella oxytoca, Azotobacter vinelandii, and Paenibacillus polymyxa have been successfully transferred and expressed in Escherichia coli, Saccharomyces cerevisiae, and even in the tobacco plant. These advances have laid the groundwork to enable cereal crops to "fix" nitrogen themselves to sustain their growth and yield.

Plant tissue culture as a perpetual source for production of industrially important bioactive compounds

Plants have been used throughout the world for its medicinal powers since ancient time. The pharmacological properties of plants are based on their phytochemical components especially the secondary metabolites which are outstanding sources of value added bioactive compounds. Secondary metabolites have complex chemical composition and are produced in response to various forms of stress to perform different physiological tasks in plants. They are used in pharmaceutical industries, cosmetics, dietary supplements, fragrances, flavors, dyes, etc. Extended use of these metabolites in various industrial sectors has initiated a need to focus research on increasing the production by employing plant tissue culture (PTC) techniques and optimizing their large scale production using bioreactors. PTC techniques being independent of climatic and geographical conditions will provide an incessant, sustainable, economical and viable production of secondary metabolites. This review article intends to assess the advantages of using plant tissue culture, distribution of important secondary metabolites in plant families, strategies involved for optimal metabolite production and the industrial importance of selected secondary metabolites.