Researching into the cellular shape, volume and elasticity of mesenchymal stem cells, osteoblasts and osteosarcoma cells by atomic force microscopy

Deciphering Key microRNA Regulated Pathways in Tissue-Engineered Blood Vessels: Implications for Vascular Scaffold Production

MicroRNAs (miRNAs) are non-coding RNAs involved in the regulation of gene expression associated with cell differentiation, proliferation, adhesion, and important biological functions such as inflammation. miRNAs play roles associated with the pathogenesis of chronic degenerative disorders including cardiovascular diseases. Understanding the influence of miRNAs and their target genes can effectively streamline the identification of key biologically active pathways that are important in the development of vascular grafts through the tissue engineering of blood vessels. To determine miRNA expression levels and identify miRNA target genes and pathways with biological roles in scaffolds that have been repopulated with adipose-derived stem cells (ASCs) generated through tissue engineering for the construction of blood vessels. miRNA quantification assays were performed in triplicate to determine miRNA expression in a total of 20 samples: five controls (natural inferior vena cava), five scaffolds recellularized with ASCs and differentiated into the endothelium (luminal layer), five samples of complete scaffolds seeded with ASCs differentiated into the endothelium (luminal layer) and smooth muscle (extraluminal layer), and five samples of ASC without cell differentiation. Several differentially expressed miRNAs were identified and predicted to modulate target genes with roles in key pathways associated with angiogenesis, vascular system control, and endothelial and smooth muscle regulation, including migration, proliferation, and growth. These findings underscore the involvement of these pathways in the regulatory mechanisms that are essential for vascular scaffold production through tissue engineering. Our research contributes to the knowledge of miRNA-regulated mechanisms, which may impact the design of vascular substitutes, and provide valuable insights for enhancing clinical practice. The molecular pathways regulated by miRNAs in tissue engineering of blood vessels (TEBV) allowed us to elucidate the main phenomena involved in cellular differentiation to constitute a blood vessel, with the main pathways being essential for angiogenesis, cellular differentiation, and differentiation into vascular smooth muscle.

Cellular elasticity in cancer: a review of altered biomechanical features

A large number of studies have shown that changes in biomechanical characteristics are an important indicator of tumor transformation in normal cells. Elastic deformation is one of the more studied biomechanical features of tumor cells, which plays an important role in tumourigenesis and development. Altered cell elasticity often brings many indications. This manuscript reviews the effects of altered cellular elasticity on cell characteristics, including adhesion viscosity, migration, proliferation, and differentiation elasticity and stiffness. Also, the physical factors that may affect cell elasticity, such as temperature, cell height, cell-viscosity, and aging, are summarized. Then, the effects of cell-matrix, cytoskeleton, in vitro culture medium, and cell-substrate with different three-dimensional structures on cell elasticity during cell tumorigenesis are outlined. Importantly, we summarize the current signaling pathways that may affect cellular elasticity, as well as tests for cellular elastic deformation. Finally, we summarize current hybrid materials: polymer-polymer, protein-protein, and protein-polymer hybrids, also, nano-delivery strategies that target cellular resilience and cases that are at least in clinical phase 1 trials. Overall, the behavior of cancer cell elasticity is modulated by biological, chemical, and physical changes, which in turn have the potential to alter cellular elasticity, and this may be an encouraging prediction for the future discovery of cancer therapies.

Profiling native pulmonary basement membrane stiffness using atomic force microscopy

Mammalian cells sense and react to the mechanics of their immediate microenvironment. Therefore, the characterization of the biomechanical properties of tissues with high spatial resolution provides valuable insights into a broad variety of developmental, homeostatic and pathological processes within living organisms. The biomechanical properties of the basement membrane (BM), an extracellular matrix (ECM) substructure measuring only ∼100-400 nm across, are, among other things, pivotal to tumor progression and metastasis formation. Although the precise assignment of the Young's modulus E of such a thin ECM substructure especially in between two cell layers is still challenging, biomechanical data of the BM can provide information of eminent diagnostic potential. Here we present a detailed protocol to quantify the elastic modulus of the BM in murine and human lung tissue, which is one of the major organs prone to metastasis. This protocol describes a streamlined workflow to determine the Young's modulus E of the BM between the endothelial and epithelial cell layers shaping the alveolar wall in lung tissues using atomic force microscopy (AFM). Our step-by-step protocol provides instructions for murine and human lung tissue extraction, inflation of these tissues with cryogenic cutting medium, freezing and cryosectioning of the tissue samples, and AFM force-map recording. In addition, it guides the reader through a semi-automatic data analysis procedure to identify the pulmonary BM and extract its Young's modulus E using an in-house tailored user-friendly AFM data analysis software, the Center for Applied Tissue Engineering and Regenerative Medicine processing toolbox, which enables automatic loading of the recorded force maps, conversion of the force versus piezo-extension curves to force versus indentation curves, calculation of Young's moduli and generation of Young's modulus maps, where the pulmonary BM can be identified using a semi-automatic spatial filtering tool. The entire protocol takes 1-2 d.

Morphology-Based Prediction of Proliferation and Differentiation Potencies of Porcine Muscle Stem Cells for Cultured Meat Production

Inconsistent efficiency of cell production caused by cellular quality variations has become a significant problem in the cultured meat industry. In our study, morphological information on passages 5-9 of porcine muscle stem cells (pMuSCs) from three lots was analyzed and used as input data in prediction models. Cell proliferation and differentiation potencies were measured by cell growth rate and average stained area of the myosin heavy chain. Analysis of PCA and heatmap showed that the morphological parameters could be used to discriminate the differences of passages and lots. Various morphological parameters were analyzed, which revealed that accumulating time-course information regarding morphological heterogeneity in cell populations is crucial to predicting the potencies. Based on the 36 and 60 h morphological profiles, the best proliferation potency prediction model (R2 = 0.95, RMSE = 1.1) and differentiation potency prediction model (R2 = 0.74, RMSE = 1.2) were explored. Correlation analysis demonstrated that morphological parameters selected in models are related to the quality of porcine muscle stem cells.

Effect of the secretome of mesenchymal stem cells overexpressing BMP-9 on osteoblast differentiation and bone repair

The secretome present in the conditioned medium (CM) of mesenchymal stem cells (MSCs) is a promising tool to be used in therapies to promote bone regeneration. Considering the high osteogenic potential of the bone morphogenetic protein 9 (BMP-9), we hypothesized that the secretome of MSCs overexpressing BMP-9 (MSCsBMP-9 ) enhances the osteoblast differentiation of MSCs and the bone formation in calvarial defects. CM of either MSCsBMP-9 (CM-MSCsBMP-9 ) or MSCs without BMP-9 overexpression (CM-MSCsVPR ) were obtained at different periods. As the CM-MSCsBMP-9 generated after 1 h presented the highest BMP-9 concentration, CM-MSCsBMP-9 and CM-MSCsVPR were collected at this time point and used to culture MSCs and to be injected into mouse calvarial defects. The CM-MSCsBMP-9 enhanced the osteoblast differentiation of MSC by upregulating RUNX2, alkaline phosphatase (ALP) and osteopontin protein expression, and ALP activity, compared with CM-MSCsVPR . The CM-MSCsBMP-9 also enhanced the bone repair of mouse calvarial defects, increasing bone volume, bone volume/total volume, bone surface, and trabecular number compared with untreated defects and defects treated with CM-MSCsVPR or even with MSCsBMP-9 themselves. In conclusion, the potential of the MSCBMP-9 -secretome to induce osteoblast differentiation and bone formation shed lights on novel cell-free-based therapies to promote bone regeneration of challenging defects.

Laser texturing of additively manufactured implants: A tool to programme biological response

The advent of additive manufacturing (AM) is rapidly shaping healthcare technologies pushing forward personalisation and enhanced implant functionalisation to improve clinical outcomes. AM techniques such as powder bed fusion (PBF) have been adopted despite the need to modify the as-built surface post manufacture. Medical device manufacturers have focused their efforts on refining various physical and chemical surface finishing approaches, however there is little consensus and some methods risk geometry alteration or contamination. This has led to a growing interest in laser texturing technologies to engineer the device surface. Herein, several bioinspired micro and nano textures were applied to laser PBF Ti-6Al-V4 substrates to alter physicochemical properties and in-turn we sought to understand what influences these alterations had on a human osteosarcoma cell line (MG63). Significant variations in roughness and time dependent contact angles were revealed between different patterns provide a tool to elicit desired biological responses. All surface treatments effectively enhanced early cell behaviour and in particular coverage was increased for the micro-textures. Influence of the patterns on cell differentiation was less consistent with alkaline phosphatase content increased only for the channel, grid and dual textures. While long term (21 days) mineralisation was found to be significantly enhanced in grids, dual, triangles and shark skin textures. Further regression analysis of all physicochemical and biological variables indicated that several properties should be used to strongly correlate cell behaviour, resulting in 82 % of the 21 day mineralisation dataset explained through a combination of roughness kurtosis and glycerol contact angle. Overall, this manuscript demonstrates the ability of laser texturing to offer tailored cell-surface interactions, which can be tuned to offer a tool to drive functional customisation of anatomically customised medical devices.

Distinctions in bone matrix nanostructure, composition, and formation between osteoblast-like cells, MG-63, and human mesenchymal stem cells, UE7T-13

Osteoblast-like cells and human mesenchymal stem cells (hMSCs) are frequently employed as osteoprogenitor cell models for evaluating novel biomaterials in bone healing and tissue engineering. In this study, the characterization of UE7T-13 hMSCs and MG-63 human osteoblast-like cells was examined. Both cells can undergo osteogenesis and produce calcium extracellular matrix; however, calcium nodules produced by MG-63 lacked a central mass and appeared flatter than UE7T-13. The absence of growing calcium nodules in MG-63 was discovered by SEM-EDX to be associated with the formation of alternating layers of cells and calcium extracellular matrix. The nanostructure and composition analysis showed that UE7T-13 had a finer nanostructure of calcium nodules with a higher calcium/phosphate ratio than MG-63. Both cells expressed high intrinsic levels of collagen type I alpha 1 chain, while only UE7T-13 expressed high levels of alkaline phosphatase, biomineralization associated (ALPL). High ALP activity in UE7T-13 was not further enhanced by osteogenic induction, but in MG-63, low intrinsic ALP activity was greatly induced by osteogenic induction. These findings highlight the differences between the two immortal osteoprogenitor cell lines, along with some technical notes that should be considered while selecting and interpreting the pertinent in vitro model.

Immediate stress dissipation in dual cross-link hydrogels controls osteogenic commitment of mesenchymal stem cells

In vitro studies of mesenchymal stem cells (MSCs) differentiation have been predominantly performed with non-physiologically elastic materials. Here we report the effect of different viscoplastic ECM mimics on the osteogenic engagement of MSCs in 2D. We have developed soft hydrogels, composed of a lactose-modified chitosan, using a combination of permanent and temporary cross-links. The presence of temporary cross-links has a minor effect on the shear modulus of the hydrogels, but causes an immediate relaxation (dissipation) of the applied stress. This material property leads to early osteogenic commitment of MSCs, as evidenced by gene expression of runt-related transcription factor 2 (RUNX2), type 1 collagen (COL1A1), osteocalcin (OCN), alkaline phosphatase enzyme activity (ALP) and calcium deposit formation. In contrast, cells cultured on purely elastic hydrogels with only permanent cross-link begin to differentiate only after a longer period of time, indicating a dissipation-mediated mechano-sensing in the osteogenic commitment of MSCs.

Cytochalasin B Influences Cytoskeletal Organization and Osteogenic Potential of Human Wharton's Jelly Mesenchymal Stem Cells

Among perinatal stem cells of the umbilical cord, human Wharton's jelly mesenchymal stem cells (hWJ-MSCs) are of great interest for cell-based therapy approaches in regenerative medicine, showing some advantages over other MSCs. In fact, hWJ-MSCs, placed between embryonic and adult MSCs, are not tumorigenic and are harvested with few ethical concerns. Furthermore, these cells can be easily cultured in vitro, maintaining both stem properties and a high proliferative rate for several passages, as well as trilineage capacity of differentiation. Recently, it has been demonstrated that cytoskeletal organization influences stem cell biology. Among molecules able to modulate its dynamics, Cytochalasin B (CB), a cyto-permeable mycotoxin, influences actin microfilament polymerization, thus affecting several cell properties, such as the ability of MSCs to differentiate towards a specific commitment. Here, we investigated for the first time the effects of a 24 h-treatment with CB at different concentrations (0.1-3 μM) on hWJ-MSCs. CB influenced the cytoskeletal organization in a dose-dependent manner, inducing changes in cell number, proliferation, shape, and nanomechanical properties, thus promoting the osteogenic commitment of hWJ-MSCs, as confirmed by the expression analysis of osteogenic/autophagy markers.

Urinary Bladder Patch Made with Decellularized Vein Scaffold Seeded with Adipose-Derived Mesenchymal Stem Cells: Model in Rabbits

BACKGROUND

To evaluate tissue regeneration of the urinary bladder after the implantation of a decellularized vein sown with autologous adipose-derived mesenchymal stem cells (ASC) on luminal surfaces.

METHODS

New Zealand rabbits (n = 10) were distributed in two groups: Group Bioscaffold alone (G1)-decellularized vena cava (1 cm2) was implanted, and Group Bioscaffold plus ACSs (G2)-decellularized vena cava (1 cm2) containing ASCs were implanted. ASCs were expanded, characterized, and maintained for one week in culture with a decellularized vein scaffold. The implants were performed under general anesthesia using a continuous suture pattern. Afterward, 21 d (day) specimens were collected and analyzed by hematoxylin and eosin (HE) histology and scanning electron microscopy (SEM).

RESULTS

The integrity of the urinary bladder was maintained in both groups. A superior regenerative process was observed in the G2 group, compared to the G1 group. We observed a greater urothelial epithelialization and maturity of the mucosa and submucosa fibroblasts. Furthermore, SEM demonstrated a notable amount of urothelial villus in the G2 group.

CONCLUSION

Decellularized vena cava scaffolds were able to maintain the integrity of the urinary bladder in the proposed model. In addition, ASCs accelerated the regenerative process development, observed primarily by the new urothelial epithelization and the maturity of mucosa and submucosa fibroblasts.

Instantaneous 4D micro-particle image velocimetry (µPIV) via multifocal microscopy (MUM)

Multifocal microscopy (MUM), a technique to capture multiple fields of view (FOVs) from distinct axial planes simultaneously and on one camera, was used to perform micro-particle image velocimetry (µPIV) to reconstruct velocity and shear stress fields imposed by a liquid flowing around a cell. A diffraction based multifocal relay was used to capture images from three different planes with 630 nm axial spacing from which the axial positions of the flow-tracing particles were calculated using the image sharpness metric. It was shown that MUM can achieve an accuracy on the calculated velocity of around (0.52 ± 0.19) µm/s. Using fixed cells, MUM imaged the flow perturbations at sub-cellular level, which showed characteristics similar to those observed in the literature. Using live cells as an exemplar, MUM observed the effect of changing cell morphology on the local flow during perfusion. Compared to standard confocal laser scanning microscope, MUM offers a clear advantage in acquisition speed for µPIV (over 300 times faster). This is an important characteristic for rapidly evolving biological systems where there is the necessity to monitor in real time entire volumes to correlate the sample responses to the external forces.

An Appearance Data-Driven Model Visualizes Cell State and Predicts Mesenchymal Stem Cell Regenerative Capacity

Mesenchymal stem cells (MSCs) are widely used in treating various diseases. However, lack of a reliable evaluation approach to characterize the potency of MSCs has dampened their clinical applications. Here, a function-oriented mathematical model is established to evaluate and predict the regenerative capacity (RC) of MSCs. Processed by exhaustive testing, the model excavates four optimal fitted indices, including nucleus roundness, nucleus/cytoplasm ratio, side-scatter height, and ERK1/2 from the given index combinations. Notably, three of them except ERK1/2 are cell appearance-associated features. The predictive power of the model is validated via screening experiments of these indices by predicting the RC of newly enrolled and chemical inhibitor-treated MSCs. Further RNA-sequencing analysis reveals that cell appearance-based indices may serve as major indicators to visualize the results of integration-weighted signals in and out of cells and reflect MSC stemness. In general, this study proposes an appearance data-driven predictive model for the RC and stemness of MSCs.

Surface-Sensitive Imaging Analysis of Cell-Microenvironment Interactions by Electrochemiluminescence Microscopy

A complex and heterogeneous cell microenvironment offers not only structural support for cells but also myriad biochemical and biophysical cues. These outside-in signals transmit into cells primarily through integrins, which are the important components of cell-matrix adhesions to direct and maintain cell behaviors and fate. In this work, we report a surface-sensitive imaging methodology for evaluating the difference in cell-matrix adhesions at the single cell level to dissect the impact of the chemical microenvironment on cell behaviors. Cells were cultured on silica nanochannel membrane (SNM) modified indium tin oxide (ITO) electrodes (SNM/ITO) with different terminal surfaces and imaged by electrochemiluminescence microscopy (ECLM). The results show that the surface tethered with Arg-Gly-Asp (RGD) groups can mediate robust cell-microenvironment interaction and those coated with silanol and (3-aminopropyl)triethoxysilane (APTES) groups transmit an intermediate adhesion, while oligo(ethylene glycol) (OEG) coated surface conveys the weakest cell-matrix adhesion. Specific recognition of integrins to different surfaces was further explored in conjunction with selective immunoblocking of different subunits. α6, α5, and α1 integrin subunits were found to recognize SNM, RGD/OEG, and APTES surfaces, respectively. The work provides not only insights into cell-microenvironment interaction but also guideline in the design and development of functional and biomimetic surface materials.

Cytochalasin B Modulates Nanomechanical Patterning and Fate in Human Adipose-Derived Stem Cells

Cytoskeletal proteins provide architectural and signaling cues within cells. They are able to reorganize themselves in response to mechanical forces, converting the stimuli received into specific cellular responses. Thus, the cytoskeleton influences cell shape, proliferation, and even differentiation. In particular, the cytoskeleton affects the fate of mesenchymal stem cells (MSCs), which are highly attractive candidates for cell therapy approaches due to their capacity for self-renewal and multi-lineage differentiation. Cytochalasin B (CB), a cyto-permeable mycotoxin, is able to inhibit the formation of actin microfilaments, resulting in direct effects on cell biological properties. Here, we investigated for the first time the effects of different concentrations of CB (0.1–10 μM) on human adipose-derived stem cells (hASCs) both after 24 h (h) of CB treatment and 24 h after CB wash-out. CB influenced the metabolism, proliferation, and morphology of hASCs in a dose-dependent manner, in association with progressive disorganization of actin microfilaments. Furthermore, the removal of CB highlighted the ability of cells to restore their cytoskeletal organization. Finally, atomic force microscopy (AFM) revealed that cytoskeletal changes induced by CB modulated the viscoelastic properties of hASCs, influencing their stiffness and viscosity, thereby affecting adipogenic fate.

Multimodal biomicroscopic system for the characterization of cells with high spatial phase sensitivity and sub-pixel accuracy

Multimodal analysis is highly advantageous for various biomedical applications including cancer and brain studies. Simultaneous measurement of quantitative phase with sub-pixel accuracy and fluorescence image is difficult to achieve in single measurement. Conventionally, off-axis interferograms are analyzed using the Fourier-transform method which limits the accuracy of the phase maps by pixel size, and usually the location of the carrier peak is in sub-pixel. We report a multimodal microscopic system consisting of high-resolution (HR) quantitative phase interferometer to retrieve sub-pixel accuracy in phase imaging and an oblique-illumination-based fluorescence imaging system which decouples the excited light from emitted signal light to avoid saturation of the camera, both integrated into a single unit. Here, highly resolved phase maps are obtained using a two-step process. First, using a speckle-free illumination which offers high spatial phase sensitivity. Second, using a hamming window for accurate estimation of original signal frequency information and HR discrete Fourier transform (DFT) which offers sub-pixel accuracy in phase measurements. HR-DFT has computational load of OABβ , where A×B is the size of the interferogram and β is the upsampling factor, making system computationally more robust and efficient compared to zero-padded FFT. The experiment is conducted on MG63 osteosarcoma and human mesenchymal stem cells (hMSCs) and their quantitative parameters are extracted with significantly improved accuracy. The average phase for MG63 cells and hMSCs, for nucleus is obtained to be 8.02 rad ± 0.80 rad and 4.29 rad ± 0.43 rad, respectively, and for cytoplasm is obtained to be 2.63 rad ± 0.96 rad and 1.73 rad ± 0.57 rad, respectively.

Biomechanical characterization and modeling of human mesenchymal stem cells under compression

The application of microelectromechanical systems (MEMS) in biomedical devices has expanded vastly over the last few decades, with MEMS devices being developed to measure different characteristics of cells. The study of cell mechanics offers valuable understanding of cell viability and functionality. Cell biomechanics approaches also facilitate the characterization of important cell and tissue behaviors. In particular, understanding of the biological response of cells to their biomechanical environment would enhance the knowledge of how cellular responses correlate to tissue level characteristics and how some diseases, such as cancer, grow in the body. This study focuses on viscoelastic modeling of the behavior of a single suspended human mesenchymal stem cell (hMSC). Mechanical properties of hMSC cells are particularly important in tissue engineering and research for the treatment of cardiovascular diseases. We evaluated the elastic and viscoelastic properties of hMSC cells using a miniaturized custom-made BioMEMS device. Our results were compared to the elastic and viscoelastic properties measured by other methods such as atomic force microscopy (AFM) and micropipette aspiration. Different approaches were applied to model the experimentally obtained force data, including elastic and Standard Linear Solid (SLS) constitutive models, and the corresponding constants were derived. These values were compared to the ones in literature that were based on micropipette aspiration and AFM methods. We then utilized a tensegrity approach to model major parts of the internal structure of the cell and treat the cell as a network of viscoelastic microtubules and microfilaments, as opposed to a simple spherical blob. The results predicted from the tensegrity model were similar to the recorded experimental data.

ER Stress in ERp57 Knockout Knee Joint Chondrocytes Induces Osteoarthritic Cartilage Degradation and Osteophyte Formation

Ageing or obesity are risk factors for protein aggregation in the endoplasmic reticulum (ER) of chondrocytes. This condition is called ER stress and leads to induction of the unfolded protein response (UPR), which, depending on the stress level, restores normal cell function or initiates apoptotic cell death. Here the role of ER stress in knee osteoarthritis (OA) was evaluated. It was first tested in vitro and in vivo whether a knockout (KO) of the protein disulfide isomerase ERp57 in chondrocytes induces sufficient ER stress for such analyses. ER stress in ERp57 KO chondrocytes was confirmed by immunofluorescence, immunohistochemistry, and transmission electron microscopy. Knee joints of wildtype (WT) and cartilage-specific ERp57 KO mice (ERp57 cKO) were analyzed by indentation-type atomic force microscopy (IT-AFM), toluidine blue, and immunofluorescence/-histochemical staining. Apoptotic cell death was investigated by a TUNEL assay. Additionally, OA was induced via forced exercise on a treadmill. ER stress in chondrocytes resulted in a reduced compressive stiffness of knee cartilage. With ER stress, 18-month-old mice developed osteoarthritic cartilage degeneration with osteophyte formation in knee joints. These degenerative changes were preceded by apoptotic death in articular chondrocytes. Young mice were not susceptible to OA, even when subjected to forced exercise. This study demonstrates that ER stress induces the development of age-related knee osteoarthritis owing to a decreased protective function of the UPR in chondrocytes with increasing age, while apoptosis increases. Therefore, inhibition of ER stress appears to be an attractive therapeutic target for OA.

Cytoskeletal Actin Structure in Osteosarcoma Cells Determines Metastatic Phenotype via Regulating Cell Stiffness, Migration, and Transmigration

Osteosarcoma is the most common primary malignant bone tumor. The cause of death due to osteosarcoma is typically a consequence of metastasis to the lung. Controlling metastasis leads to improved prognosis for osteosarcoma patients. The cell stiffness of several tumor types is involved in metastatic potential; however, it is unclear whether the metastatic potential of osteosarcoma depends on cell stiffness. In this study, we analyzed the cell stiffness of the low metastatic Dunn cell line and its highly metastatic LM8 subline, and compared actin organization, cell proliferation, and metastasis. Actin cytoskeleton, polymerization, stiffness, and other cellular properties were analyzed. The organization of the actin cytoskeleton was evaluated by staining F-actin with Alexa Fluor 488 phalloidin. Cell stiffness was measured using Atomic Force Microscopy (AFM). Cell proliferation, migration, invasion, and adhesion were also evaluated. All experiments were performed using mouse osteosarcoma cell lines cultured in the absence and presence of cytochalasin. In LM8 cells, actin polymerization was strongly suppressed and actin levels were significantly lower than in Dunn cells. Stiffness evaluation revealed that LM8 cells were significantly softer than Dunn. Young’s modulus images showed more rigid fibrillar structures were present in Dunn cells than in LM8 cells. LM8 cells also exhibited a significantly higher proliferation. The migration and invasion potential were also higher in LM8 cells, whereas the adhesion potential was higher in Dunn cells. The administration of cytochalasin resulted in actin filament fragmentation and decreased actin staining intensity and cell stiffness in both LM8 and Dunn cells. Cells with high metastatic potential exhibited lower actin levels and cell stiffness than cells with low metastatic potential. The metastatic phenotype is highly correlated to actin status and cell stiffness in osteosarcoma cells. These results suggest that evaluation of actin dynamics and cell stiffness is an important quantitative diagnostic parameter for predicting metastatic potential. We believe that these parameters represent new reliable quantitative indicators that can facilitate the development of new drugs against metastasis.

Basement membrane stiffness determines metastases formation

The basement membrane (BM) is a special type of extracellular matrix and presents the major barrier cancer cells have to overcome multiple times to form metastases. Here we show that BM stiffness is a major determinant of metastases formation in several tissues and identify netrin-4 (Net4) as a key regulator of BM stiffness. Mechanistically, our biophysical and functional analyses in combination with mathematical simulations show that Net4 softens the mechanical properties of native BMs by opening laminin node complexes, decreasing cancer cell potential to transmigrate this barrier despite creating bigger pores. Our results therefore reveal that BM stiffness is dominant over pore size, and that the mechanical properties of 'normal' BMs determine metastases formation and patient survival independent of cancer-mediated alterations. Thus, identifying individual Net4 protein levels within native BMs in major metastatic organs may have the potential to define patient survival even before tumour formation. The ratio of Net4 to laminin molecules determines BM stiffness, such that the more Net4, the softer the BM, thereby decreasing cancer cell invasion activity.

Early time-point cell morphology classifiers successfully predict human bone marrow stromal cell differentiation modulated by fiber density in nanofiber scaffolds

Nanofiber scaffolds can induce osteogenic differentiation and cell morphology alterations of human bone marrow stromal cells (hBMSCs) without introduction of chemical cues. In this study, we investigate the predictive power of day 1 cell morphology, quantified by a machine learning based method, as an indicator of osteogenic differentiation modulated by nanofiber density. Nanofiber scaffolds are fabricated via electrospinning. Microscopy, quantitative image processing and clustering analysis are used to systematically quantify scaffold properties as a function of fiber density. hBMSC osteogenic differentiation potential is evaluated after 14 days using osteogenic marker gene expression and after 50 days using calcium mineralization, showing enhanced osteogenic differentiation with an increase in nanofiber density. Cell morphology measurements at day 1 successfully predict differentiation potential when analyzed with the support vector machine (SVM)/supercell tools previously developed and trained on cells from a different donor. A correlation is observed between differentiation potential and cell morphology, demonstrating sensitivity of the morphology measurement to varying degrees of differentiation potential. To further understand how nanofiber density determines hBMSC morphology, both full 3-D morphology measurements as well as other measurements of the 2-D projected morphology are investigated in this study. To achieve predictive power on hBMSC osteogenic differentiation, at least two morphology metrics need to be considered together for each cell, with the majority of metric pairs including one 3-D morphology metric. Analysis of the local nanofiber structure surrounding each cell reveals a correlation with single-cell morphology and indicates that the osteogenic differentiation phenotype may be predictive at the single-cell level.

Investigating heterogeneities of live mesenchymal stromal cells using AI-based label-free imaging

Mesenchymal stromal cells (MSCs) are multipotent cells that have great potential for regenerative medicine, tissue repair, and immunotherapy. Unfortunately, the outcomes of MSC-based research and therapies can be highly inconsistent and difficult to reproduce, largely due to the inherently significant heterogeneity in MSCs, which has not been well investigated. To quantify cell heterogeneity, a standard approach is to measure marker expression on the protein level via immunochemistry assays. Performing such measurements non-invasively and at scale has remained challenging as conventional methods such as flow cytometry and immunofluorescence microscopy typically require cell fixation and laborious sample preparation. Here, we developed an artificial intelligence (AI)-based method that converts transmitted light microscopy images of MSCs into quantitative measurements of protein expression levels. By training a U-Net+ conditional generative adversarial network (cGAN) model that accurately (mean [Formula: see text] = 0.77) predicts expression of 8 MSC-specific markers, we showed that expression of surface markers provides a heterogeneity characterization that is complementary to conventional cell-level morphological analyses. Using this label-free imaging method, we also observed a multi-marker temporal-spatial fluctuation of protein distributions in live MSCs. These demonstrations suggest that our AI-based microscopy can be utilized to perform quantitative, non-invasive, single-cell, and multi-marker characterizations of heterogeneous live MSC culture. Our method provides a foundational step toward the instant integrative assessment of MSC properties, which is critical for high-throughput screening and quality control in cellular therapies.

Update on the role of emerging stem cell technology in head and neck medicine

Head and neck surgery is a broad discipline that involves the management of complex conditions such as burns, skin cancer, head and neck cancer, congenital abnormalities, and facial rejuvenation. For patients with cancer, surgery, radiotherapy, and chemotherapy are often the main modes of treatment. Many patients require follow-up reconstructive surgery, and the use of stem cells offers novel treatments that could aid recovery. Laryngeal, tracheal, and neuronal tissues are frequently damaged by surgery in the head and neck and these tissues have little intrinsic regenerative ability. Pluripotent embryonic stem cells retain the ability to differentiate into a wide variety of cells meaning that large tissue defects can be reduced by stimulating new cell growth. Research has demonstrated potential benefits of using stem cells in facial rejuvenation procedures and the management of burns sequelae. The advancements made in the use of adult progenitor stem cells as a possible source for pluripotent stem cells (induced pluripotent stem cells) mean that ethical considerations around the use of embryological tissue can be minimized, allowing for more research to take place. Currently, the evidence base for the use of stem cells in head and neck surgery is limited, but it has now been proven that stem cells can act as a source for lost or damaged tissue in the head and neck. With continuous advancements being made in the fields of tissue engineering, it is likely that stem cells will play a major role in head and neck surgery in the future.

Precision 3D-Printed Cell Scaffolds Mimicking Native Tissue Composition and Mechanics

Cellular dynamics are modeled by the 3D architecture and mechanics of the extracellular matrix (ECM) and vice versa. These bidirectional cell-ECM interactions are the basis for all vital tissues, many of which have been investigated in 2D environments over the last decades. Experimental approaches to mimic in vivo cell niches in 3D with the highest biological conformity and resolution can enable new insights into these cell-ECM interactions including proliferation, differentiation, migration, and invasion assays. Here, two-photon stereolithography is adopted to print up to mm-sized high-precision 3D cell scaffolds at micrometer resolution with defined mechanical properties from protein-based resins, such as bovine serum albumin or gelatin methacryloyl. By modifying the manufacturing process including two-pass printing or post-print crosslinking, high precision scaffolds with varying Young's moduli ranging from 7-300 kPa are printed and quantified through atomic force microscopy. The impact of varying scaffold topographies on the dynamics of colonizing cells is observed using mouse myoblast cells and a 3D-lung microtissue replica colonized with primary human lung fibroblast. This approach will allow for a systematic investigation of single-cell and tissue dynamics in response to defined mechanical and bio-molecular cues and is ultimately scalable to full organs.

Inadequate tissue mineralization promotes cancer cell attachment

Bone metastases are a frequent complication in prostate cancer, and several studies have shown that vitamin D deficiency promotes bone metastases. However, while many studies focus on vitamin D’s role in cell metabolism, the effect of chronically low vitamin D levels on bone tissue, i.e. insufficient mineralization of the tissue, has largely been ignored. To investigate, whether poor tissue mineralization promotes cancer cell attachment, we used a fluorescence based adhesion assay and single cell force spectroscopy to quantify the adhesion of two prostate cancer cell lines to well-mineralized and demineralized dentin, serving as biomimetic bone model system. Adhesion rates of bone metastases-derived PC3 cells increased significantly on demineralized dentin. Additionally, on mineralized dentin, PC3 cells adhered mainly via membrane anchored surface receptors, while on demineralized dentin, they adhered via cytoskeleton-anchored transmembrane receptors, pointing to an interaction via exposed collagen fibrils. The adhesion rate of lymph node derived LNCaP cells on the other hand is significantly lower than that of PC3 and not predominately mediated by cytoskeleton-linked receptors. This indicates that poor tissue mineralization facilitates the adhesion of invasive cancer cells by the exposure of collagen and emphasizes the disease modifying effect of sufficient vitamin D for cancer patients.

Simultaneous fluorescence and quantitative phase imaging of MG63 osteosarcoma cells to monitor morphological changes with time using partially spatially coherent light source

Quantitative phase imaging (QPI) technique is used to determine various biophysical parameters, such as refractive index, cell thickness, morphology, etc. On the other hand, fluorescence microscopy is used to acquire information regarding molecular specificity of the biological cells and tissues. Conventionally, a fully coherent light source such as laser is used in QPI technique to obtain the interference fringes with ease; however, its high coherence is also responsible for the generation of speckle and spurious fringes, which results in degraded image quality and affects the phase measurement results too. In this paper, we report a multi-modal system that can be effectively utilized to acquire time varied diverse information about the biological specimen with high spatial phase sensitivity. Herein, a single unit comprising of a fluorescence microscope and the Linnik based interferometer specially equipped with a partially spatially coherent light source illumination was developed. The integrated system is capable to procure molecular specificity and phase information of biological specimen, in a single shot, utilizing a single-chip color CCD camera. Here, we performed experiments on MG63 osteosarcoma cells, and the composite interferometric-fluorescence images were obtained and then digitally decomposed into red and green colors; and, the phase maps were reconstructed using the Fourier fringe analysis method. Furthermore, the cultured cells were monitored over a time-span to observe and investigate the time dependent morphological changes along with the quantification of cellular adhesion and spreading. Hence, the proposed system can be utilized to quantify time dependent changes in the cell's morphology and in cell adhesion which can be an indicator for the detection of various range of diseases such as arthritis, cancer, osteoporosis and atherosclerosis.

Computational Modeling of Human Mesenchymal Stromal Cell Proliferation and Extra-Cellular Matrix Production in 3D Porous Scaffolds in a Perfusion Bioreactor: The Effect of Growth Factors

Stem cell expansion on 3D porous scaffolds cultured in bioreactor systems has been shown to be beneficial for maintenance of the original cell functionality in tissue engineering strategies (TE). However, the production of extracellular matrix (ECM) makes harvesting the progenitor cell population from 3D scaffolds a challenge. Medium composition plays a role in stimulating cell proliferation over extracellular matrix (ECM) production. In this regard, a computational model describing tissue growth inside 3D scaffolds can be a great tool in designing optimal experimental conditions. In this study, a computational model describing cell and ECM growth in a perfusion bioreactor is developed, including a description of the effect of a (generic) growth factor on the biological processes taking place inside the 3D scaffold. In the model, the speed of cell and ECM growth depends on the flow-induced shear stress, curvature and the concentrations of oxygen, glucose, lactate, and growth factor. The effect of the simulated growth factor is to differentially enhance cell proliferation over ECM production. After model calibration with historic in-house data, a multi-objective optimization procedure is executed aiming to minimize the total experimental cost whilst maximizing cell growth during culture. The obtained results indicate there are multiple optimum points for the medium refreshment regime and the initial growth factor concentration where a trade-off is made between the final amount of cells and the culture cost. Finally, the model is applied to experiments reported in the literature studying the effects of perfusion-based cell culture and/or growth factor supplementation on cell expansion. The qualitative similarities between the simulation and experimental results, even in the absence of proper model calibration, reinforces the generic character of the proposed modeling framework. The model proposed in this study can contribute to the cost efficient production of cell-based TE products, ultimately contributing to their affordability and accessibility.

Alteration of Young's modulus in mesenchymal stromal cells during osteogenesis measured by atomic force microscopy

Mechanical properties of biological tissues are increasingly recognized as an important parameter for the indication of disease states as well as tissue homeostasis and regeneration. Multipotent mesenchymal stromal/stem cells (MSCs), which play important roles in bone formation and remodeling, are potential cell sources for regenerative medicine. However, the cellular mechanical properties of differentiating MSCs corresponding to the substrate stiffness has not been sufficiently studied. In this study, we used Atomic Force Microscopy (AFM) to measure changes of stiffness of human MSCs cultured in rigid Petri dish and on polyacrylamide (PA) substrates during osteogenic differentiation. The results showed that the Young's modulus of MSC cytoplasmic outer region increased over time during osteogenesis. There is a strong linear correlation between the osteogenic induction time and the Young's modulus of the cells cultured in rigid Petri dishes in the first 15 days after the induction; the Young's modulus approaches to a plateau after day 15. On the other hand, the Young's moduli of MSCs cultured on PA gels with stiffness of 7 kPa and 42 kPa also increase over time during osteogenic differentiation, but the inclination of such increase is much smaller than that of MSCs differentiating in rigid dishes. Herein, we established a protocol of AFM measurement to evaluate the maturation of stem cell osteogenic differentiation at the single cell level and could encourage further AFM applications in tissue engineering related to mechanobiology.

Sensory neuropeptides are required for bone and cartilage homeostasis in a murine destabilization-induced osteoarthritis model

Numerous studies identified a role for the sensory neuropeptides substance P (SP) and alpha calcitonin gene-related peptide (αCGRP) in osteoarthritis (OA) pain behavior. Surprisingly, little attention has been paid on how their trophic effects on cartilage and bone cells might affect structural changes of bone and cartilage in OA pathology. Here, we sought to elucidate sensory neuropeptides influence on structural alterations of bone and cartilage during murine OA pathophysiology. OA was induced by destabilization of the medial meniscus (DMM) in the right knee joint of 12 weeks old male C57Bl/6J wildtype (WT) mice and mice either deficient for SP (tachykinin 1 (Tac1)-/-) or αCGRP. By OARSI histopathological grading we observed significant cartilage matrix degradation after DMM surgery in αCGRP-deficient mice after 4 weeks whereas Tac1-/- scores were not different to sham mice before 12 weeks after surgery. Indentation-type atomic force microscopy (IT-AFM) identified a strong superficial zone (SZ) cartilage phenotype in Tac1-/- Sham mice. Opposed to WT and αCGRP-/- mice, SZ cartilage of Tac1-/- mice softened 2 weeks after OA induction. In Tac1-/- DMM mice, bone volume to total volume ratio (BV/TV) increased significantly compared to the Tac1-/- Sham group, 2 weeks after surgery. WT mice had reduced BV/TV compared to αCGRP-/- and Tac1-/- mice after 12 weeks. Increased calcified cartilage thickness and medial condyle diameter were detected in the medial tibia of all groups 8 weeks after OA induction by nanoCT analysis. Meniscal ossification occurred in all OA groups, but was significantly stronger in the absence of neuropeptides. Increased serum concentration of the respective non-deleted neuropeptide was observed in both neuropeptide-deficient mice strains. Both neuropeptides protect from age-related bone structural changes under physiological conditions and SP additionally demonstrates an anabolic effect on bone structure preservation in a pathophysiological situation. Both neuropeptide deficient mice display an intrinsic structural cartilage matrix phenotype that might alter progression of cartilage degeneration in OA.

Three-dimensional self-assembling nanofiber matrix rejuvenates aged/degenerative human tendon stem/progenitor cells

The poor healing capacity of tendons is known to worsen in the elderly. During tendon aging and degeneration, endogenous human tendon stem/progenitor cells (hTSPCs) experience profound pathological changes. Here, we explored a rejuvenation strategy for hTSPCs derived from aged/degenerated Achilles tendons (A-TSPCs) by providing three-dimensional (3D) nanofiber hydrogels and comparing them to young/healthy TSPCs (Y-TSPCs). RADA peptide hydrogel has a self-assembling ability, forms a nanofibrous 3D niche and can be further functionalized by adding RGD motifs. Cell survival, apoptosis, and proliferation assays demonstrated that RADA and RADA/RGD hydrogels support A-TSPCs in a comparable manner to Y-TSPCs. Moreover, they rejuvenated A-TSPCs to a phenotype similar to that of Y-TSPCs, as evidenced by restored cell morphology and cytoskeletal architecture. Transmission electron, confocal laser scanning and atomic force microscopies demonstrated comparable ultrastructure, surface roughness and elastic modulus of A- and Y-TSPC-loaded hydrogels. Lastly, quantitative PCR revealed similar expression profiles, as well a significant upregulation of genes related to tenogenesis and multipotency. Taken together, the RADA-based hydrogels exert a rejuvenating effect by recapitulating in vitro specific features of the natural microenvironment of human TSPCs, which strongly indicates their potential to direct cell behaviour and overcome the challenge of cell aging and degeneration in tendon repair.

Atomic Force Microscopy: The Characterisation of Amyloid Protein Structure in Pathology

:

Proteins are versatile macromolecules that perform a variety of functions and participate in virtually all cellular processes. The functionality of a protein greatly depends on its structure and alterations may result in the development of diseases. Most well-known of these are protein misfolding disorders, which include Alzheimer’s and Parkinson’s diseases as well as type 2 diabetes mellitus, where soluble proteins transition into insoluble amyloid fibrils. Atomic Force Microscopy (AFM) is capable of providing a topographical map of the protein and/or its aggregates, as well as probing the nanomechanical properties of a sample. Moreover, AFM requires relatively simple sample preparation, which presents the possibility of combining this technique with other research modalities, such as confocal laser scanning microscopy, Raman spectroscopy and stimulated emission depletion microscopy. In this review, the basic principles of AFM are discussed, followed by a brief overview of how it has been applied in biological research. Finally, we focus specifically on its use as a characterisation method to study protein structure at the nanoscale in pathophysiological conditions, considering both molecules implicated in disease pathogenesis and the plasma protein fibrinogen. In conclusion, AFM is a userfriendly tool that supplies multi-parametric data, rendering it a most valuable technique.

Development of label-free biophysical markers in osteogenic maturation

The spatial and temporal changes of morphological and mechanical properties of living cells reflect complex functionally-associated processes. Monitoring these modifications could provide a direct information on the cellular functional state. Here we present an integrated biophysical approach to the quantification of the morphological and mechanical phenotype of single cells along a maturation pathway. Specifically, quantitative phase microscopy and single cell biomechanical testing were applied to the characterization of the maturation of human foetal osteoblasts, demonstrating the ability to identify effective label-free biomarkers along this fundamental biological process.

Cell Therapy: Effect of Locally Injected Mesenchymal Stromal Cells Derived from Bone Marrow or Adipose Tissue on Bone Regeneration of Rat Calvarial Defects

Treatment of large bone defects is a challenging clinical situation that may be benefited from cell therapies based on regenerative medicine. This study was conducted to evaluate the effect of local injection of bone marrow-derived mesenchymal stromal cells (BM-MSCs) or adipose tissue-derived MSCs (AT-MSCs) on the regeneration of rat calvarial defects. BM-MSCs and AT-MSCs were characterized based on their expression of specific surface markers; cell viability was evaluated after injection with a 21-G needle. Defects measuring 5 mm that were created in rat calvaria were injected with BM-MSCs, AT-MSCs, or vehicle-phosphate-buffered saline (Control) 2 weeks post-defect creation. Cells were tracked by bioluminescence, and 4 weeks post-injection, the newly formed bone was evaluated by µCT, histology, nanoindentation, and gene expression of bone markers. BM-MSCs and AT-MSCs exhibited the characteristics of MSCs and maintained their viability after passing through the 21-G needle. Injection of both BM-MSCs and AT-MSCs resulted in increased bone formation compared to that in Control and with similar mechanical properties as those of native bone. The expression of genes associated with bone formation was higher in the newly formed bone induced by BM-MSCs, whereas the expression of genes involved in bone resorption was higher in the AT-MSC group. Cell therapy based on local injection of BM-MSCs or AT-MSCs is effective in delivering cells that induced a significant improvement in bone healing. Despite differences observed in molecular cues between BM-MSCs and AT-MSCs, both cells had the ability to induce bone tissue formation at comparable amounts and properties. These results may drive new cell therapy approaches toward complete bone regeneration.

AFM-based Analysis of Wharton's Jelly Mesenchymal Stem Cells

Wharton's jelly mesenchymal stem cells (WJ-MSCs) are multipotent stem cells that can be used in regenerative medicine. However, to reach the high therapeutic efficacy of WJ-MSCs, it is necessary to obtain a large amount of MSCs, which requires their extensive in vitro culturing. Numerous studies have shown that in vitro expansion of MSCs can lead to changes in cell behavior; cells lose their ability to proliferate, differentiate and migrate. One of the important measures of cells' migration potential is their elasticity, determined by atomic force microscopy (AFM) and quantified by Young's modulus. This work describes the elasticity of WJ-MSCs during in vitro cultivation. To identify the properties that enable transmigration, the deformability of WJ-MSCs that were able to migrate across the endothelial monolayer or Matrigel was analyzed by AFM. We showed that WJ-MSCs displayed differences in deformability during in vitro cultivation. This phenomenon seems to be strongly correlated with the organization of F-actin and reflects the changes characteristic for stem cell maturation. Furthermore, the results confirm the relationship between the deformability of WJ-MSCs and their migration potential and suggest the use of Young's modulus as one of the measures of competency of MSCs with respect to their possible use in therapy.

Shear Modulus Measurement by Quantitative Phase Imaging and Correlation with Atomic Force Microscopy

Many approaches have been developed to characterize cell elasticity. Among these, atomic force microscopy (AFM) combined with modeling has been widely used to characterize cellular compliance. However, such approaches are often limited by the difficulties associated with using a specific instrument and by the complexity of analyzing the measured data. More recently, quantitative phase imaging (QPI) has been applied to characterize cellular stiffness by using an effective spring constant. This metric was further correlated to mass distribution (disorder strength) within the cell. However, these measurements are difficult to compare to AFM-derived measurements of Young's modulus. Here, we describe, to our knowledge, a new way of analyzing QPI data to directly retrieve the shear modulus. Our approach enables label-free measurement of cellular mechanical properties that can be directly compared to values obtained from other rheological methods. To demonstrate the technique, we measured shear modulus and phase disorder strength using QPI, as well as Young's modulus using AFM, across two breast cancer cell-line populations dosed with three different concentrations of cytochalasin D, an actin-depolymerizing toxin. Comparison of QPI-derived and AFM moduli shows good agreement between the two measures and further agrees with theory. Our results suggest that QPI is a powerful tool for cellular biophysics because it allows for optical quantitative measurements of cell mechanical properties.

[Analysis of Biological Properties of Human Adult Mesenchymal Stem Cells and Their Effect on Mouse Hind Limb Ischemia]

BACKGROUND

Due to their self-renewal, proliferation, differentiation, and angiogenesis-inducing capacity, human adipose mesenchymal stem cells (AMSC) have potential clinical applications in the treatment of limb ischemia. AMSC from healthy donors have been shown to induce neovascularization in animal models. However, when cells were obtained from donors suffering from any pathology, their autologous application showed limited effectiveness. We studied whether liposuction niche and obesity could determine the regenerative properties of cells meaning that not all cell batches are suitable for clinical practice.

METHODS

AMSC obtained from 10 donors, obese and healthy, were expanded in vitro following a good manufacturing practice-like production protocol. Cell viability, proliferation kinetics, morphological analysis, phenotype characterization, and stemness potency were assessed over the course of the expansion process. AMSC selected for having the most suitable biological properties were used as an experimental treatment in a preclinical mouse model of hind limb ischemia.

RESULT

All cell batches were positively characterized as mesenchymal stem cells, but not all of them showed the same properties or were successfully expanded in vitro, depending on the characteristics of the donor and the extraction area. Notably, AMSC from the abdomen of obese donors showed undesirable biological properties. AMSC with low duplication times and multilineage differentiation potential and forming large densely packed colonies, were able, following expansion in vitro, to increase neovascularization and repair when implanted in the ischemic tissue of mice.

CONCLUSION

An extensive AMSC biological properties study could be useful to predict the potential clinical efficacy of cells before in vivo transplantation. Thus, peripheral ischemia and possibly other pathologies could benefit from stem cell treatments as shown in our preclinical model in terms of tissue damage repair and regeneration after ischemic injury.

Superparamagnetic iron oxide nanoparticles of curcumin enhance gemcitabine therapeutic response in pancreatic cancer

Pancreatic cancer is a complex disease accounting for fibrotic tumors and an aggressive phenotype. Gemcitabine (GEM) is used as a standard therapy, which develops chemoresistance leading to poor patient outcome. We have recently developed a superparamagnetic iron oxide nanoparticle (SPION) formulation of curcumin (SP-CUR), which is a nontoxic, bioactive anti-inflammatory/anti-cancer agent for its enhanced delivery in tumors. In this study, we demonstrate that SP-CUR effectively delivers bioactive curcumin to pancreatic tumors, simultaneously enhances GEM uptake and its efficacy. Mechanistic revelations suggest that SP-CUR targets tumor microenvironment via suppression of sonic hedgehog (SHH) pathway and an oncogenic CXCR4/CXCL12 signaling axis that inhibits bidirectional tumor-stromal cells interaction. Increased GEM uptake was observed due to upregulation of the human nucleoside transporter genes (DCK, hCNT) and blocking ribonucleotide reductase subunits (RRM1/RRM2). Additionally, co-treatment of SP-CUR and GEM targets cancer stem cells by regulating pluripotency maintaining stemness factors (Nanog, Sox2, c-Myc and Oct-4), and restricting tumor sphere formation. In an orthotopic mouse model, an enhanced accumulation of SP-CUR was found in pancreas, which potentiated GEM to reduce tumor growth and metastasis. Analysis of tumor tissues suggest that the treatment inhibits tumor stroma (α-SMA, Desmin and Hyluronic Acid) and induces changes in cell stiffness, as measured via Atomic Force Microscopy. This was accompanied by alteration of key cellular proteins of SHH signaling such as SHH, Gli-1, Gli-2, Sufu, and NFĸB-65 as indicated by Immunoblotting and Immunohistochemistry. These results suggest that SP-CUR has a great potential for future clinical use in the management of pancreatic cancer.

Effect of cell sample size in atomic force microscopy nanoindentation

Single-cell technologies are powerful tools to evaluate cell characteristics. In particular, Atomic Force Microscopy (AFM) nanoindentation experiments have been widely used to study single cell mechanical properties. One important aspect related to single cell techniques is the need for sufficient statistical power to obtain reliable results. This aspect is often overlooked in AFM experiments were sample sizes are arbitrarily set. The aim of the present work was to propose a tool for sample size estimation in the context of AFM nanoindentation experiments of single cell. To this aim, a retrospective approach was used by acquiring a large dataset of experimental measurements on four bone cell types and by building saturation curves for increasing sample sizes with a bootstrap resampling method. It was observed that the coefficient of variation (CV_%) decayed with a function of the form y = ax^b with similar parameters for all samples tested and that sample sizes of 21 and 83 cells were needed for the specific cells and protocol employed if setting a maximum threshold on CV_% of 10% or 5%, respectively. The developed tool is made available as an open-source repository and guidelines are provided for its use for AFM nanoindentation experimental design.

Nanoscale Topography-Rigidity Correlation at the Surface of T Cells

The mechanical properties of cells affect their function, in sensing, development, and motility. However, the rigidity of the cell surface and its correlation to its local topography remain poorly understood. Here, we applied quantitative imaging AFM to capture high-resolution force maps at the surface of nonadherent T cells. Using this method, we found a positive topography-rigidity correlation at the cells' surface, as opposed to a negative correlation at the surface of adherent cells. We then used 3D single-molecule localization microscopy of the membrane and cortical actin and an actin-perturbing drug to implicate actin involvement in the positive rigidity-topography correlation in T cells. Our results clearly reveal the variability of cell-surface rigidity and its underlying mechanism, showing a functional role for cortical actin in the PM protrusions of T cells, since they are locally more rigid than their surroundings. These findings suggest the possible functional role of membrane protrusions as mechanosensors.

Age related changes in cell stiffness of tendon stem/progenitor cells and a rejuvenating effect of ROCK-inhibition

Tendon stem/progenitor cells (TSPC) are potential targets for regenerative medicine and the treatment of tendon injuries. The frequency of such injuries increases in elderly patients while the proportion of functional TSPCs in tendon tissue decreases, protracting tendon repair. Using atomic force microscopy (AFM), we show that cell stiffness and size increase in TSPCs isolated from elderly patients (A-TSPC) compared to TSPCs from younger patients (Y-TSPC). Additionally, two-photon excited fluorescence (TPEF) microscopy revealed a denser, well-structured actin cytoskeleton in A-TSPC, which correlates with the augmented cell stiffness. Treating A-TSPC with ROCK-inhibitor, reverses these age-related changes, and has rejuvenating effect on cell morphology and stiffness. We assume that cellular stiffness is a suitable marker for cell aging and ROCK a potential target for therapeutic applications of cell rejuvenation.

Enhanced chondrogenic differentiation of bone marrow mesenchymal stem cells on gelatin/glycosaminoglycan electrospun nanofibers with different amount of glycosaminoglycan

Tissue engineering is a new technique to help damaged cartilage treatment using cells and scaffolds. In this study we tried to evaluate electrospun scaffolds composed of gelatin/glycosaminoglycan (G/GAG) blend nanofibers in chondrogenesis of bone marrow-derived mesenchymal stem cells (BMMSCs). Scaffolds were fabricated by electrospinning technique with different concentration of glycosaminoglycan (0%, 5%, 10%, and 15%) in gelatin matrix. BMMSCs were cultured on the scaffolds for chondrogenesis process. MTT assay was done for scaffold's biocompatibility and cells viability evaluation. Alcian blue staining was carried out to determine the release of GAG and reverse transcription polymerase chain reaction (RT-PCR) was done for expression of COL2A1 and also immunocytochemistry assay were used to confirm expression of type II collagen. Scaffold with 15% GAG showed better result for biocompatibility (p =0.02). Scanning electron microscopy (SEM) micrographs showed that MSCs have good attachment to the scaffolds. Alcian blue staining result confirmed that cells produce GAG during differentiation time different from GAG in the scaffolds. Also the results for RT-PCR showed the expression of COL2A1 marker. Immunocytochemistry assay for type II collagen confirm that this protein expressed. Scaffold comprising 15% GAG is better results for chondrogenesis and it can be a good applicant for cartilage tissue engineering. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 38-48, 2019.

1H-NMR and MALDI-TOF MS as metabolomic quality control tests to classify platelet derived medium additives for GMP compliant cell expansion procedures

Introduction

Ex vivo cell expansion under Good Manufacturing Practice (GMP) guidelines can be performed using medium additives containing human growth factors from platelets. These products can differently affect proliferation of adipose mesenchymal stromal stem cells (ASC). Qualification of medium additive performance is required for validation under GMP regulations: assessment of growth factor concentrations is not sufficient to predict the biological activity of the product batch. Proton nuclear magnetic resonance spectrometry (¹H-NMR) and matrix-assisted laser desorption/ionization time of flight mass spectroscopy (MALDI-TOF MS) provide wide molecular characterization of samples.

Aims

We aimed to assess if ¹H-NMR and MALDI-TOF MS techniques can be used as quality control test potentially predicting the impact of a medium additive on cell proliferation.

Methods

We tested the impact on ASC growth rate (cell proliferation assessment and cell morphology analysis) of four medium additives, obtained by different methods from human platelet apheresis product. In order to classify each medium additive, we evaluated growth factor concentrations and spectra obtained by ¹H-NMR and by MALDI-TOF MS.

Results

Medium additive obtained by CaCl₂ activation of platelet rich products induced higher proliferation rate vs additive derived from platelet depleted ones. Additives obtained by freeze-and-thaw methods weakly induced ASC proliferation. As expected, principal component analysis of growth factor concentrations did not unravel specific biochemical features characterizing medium additives in relation with their biological activity. Otherwise, while ¹H-NMR showed a partial resolution capacity, analysis of MALDI-TOF MS spectra allowed unambiguous distinction between the medium additives we used to differently stimulate cell growth in vitro.

Discussion

MALDI-TOF and, despite limitations, ¹H-NMR are promising cost effective and reliable quality controls to classify the potential of a medium additive to promote ASC growth. This can represent, after further investigations and appropriate validation, a significant advantage for GMP compliant manufacturing of advanced cell therapy products.

Cobalt and Titanium nanoparticles influence on human osteoblast mitochondrial activity and biophysical properties of their cytoskeleton

We investigated the biophysical effects (cell elasticity and spring constant) caused on Saos-2 human osteoblast-like cells by nanosized metal (Co and Ti) wear debris, as well as the adhesive characteristics of cells after exposure to the metal nanoparticles. Cell mitochondrial activity was investigated using the MTT assays; along with LDH assay, metal uptake, cell apoptosis and mineralisation output (alizarin red assay) of the cells. Osteoblasts mitochondrial activity was not affected by Ti nanoparticles at concentrations up to 1 mg/ml and by Cobalt nanoparticles at concentrations < 0.5 mg/ml; however elasticity and spring constant were significantly modified by the exposure to nanoparticles of these metals in agreement with the alteration of cell conformation (shape), as result of the exposure to simulated wear debris, demonstrated by fluorescence images after actin staining.

Improved GMP compliant approach to manipulate lipoaspirates, to cryopreserve stromal vascular fraction, and to expand adipose stem cells in xeno-free media

Background

The stromal vascular fraction (SVF) derived from adipose tissue contains adipose-derived stromal/stem cells (ASC) and can be used for regenerative applications. Thus, a validated protocol for SVF isolation, freezing, and thawing is required to manage product administration. To comply with Good Manufacturing Practice (GMP), fetal bovine serum (FBS), used to expand ASC in vitro, could be replaced by growth factors from platelet concentrates.

Methods

Throughout each protocol, GMP-compliant reagents and devices were used. SVF cells were isolated from lipoaspirates by a standardized enzymatic protocol. Cells were cryopreserved in solutions containing different albumin or serum and dimethylsulfoxide (DMSO) concentrations. Before and after cryopreservation, we analyzed: cell viability (by Trypan blue); immunophenotype (by flow cytometry); colony-forming unit-fibroblast (CFU-F) formation; and differentiation potential. ASC, seeded at different densities, were expanded in presence of 10% FBS or 5% supernatant rich in growth factors (SRGF) from platelets. The differentiation potential and cell transformation grade were tested in expanded ASC.

Results

We demonstrated that SVF can be obtained with a consistent yield (about 185 × 10³ cells/ml lipoaspirate) and viability (about 82%). Lipoaspirate manipulation after overnight storage at +4 °C reduced cell viability (−11.6%). The relative abundance of ASC (CD34⁺CD45⁻CD31^–) and endothelial precursors (CD34⁺CD45⁻CD31⁺) in the SVF product was about 59% and 42%, respectively. A period of 2 months cryostorage in autologous serum with added DMSO minimally affected post-thaw SVF cell viability as well as clonogenic and differentiation potentials. Viability was negatively affected when SVF was frozen at a cell concentration below 1.3 × 10⁶ cells/ml. Cell viability was not significantly affected after a freezing period of 1 year.

Independent of seeding density, ASC cultured in 5% SRGF exhibited higher growth rates when compared with 10% FBS. ASC expanded in both media showed unaltered identity (by flow cytometry) and were exempt from genetic lesions. Both 5% SRGF- and 10% FBS-expanded ASC efficiently differentiated to adipocytes, osteocytes, and chondrocytes.

Conclusions

This paper reports a GMP-compliant approach for freezing SVF cells isolated from adipose tissue by a standardized protocol. Moreover, an ASC expansion method in controlled culture conditions and without involvement of animal-derived additives was reported.

Numerical optimization of cell colonization modelling inside scaffold for perfusion bioreactor: A multiscale model

Part of clinically applicable bone graft substitutes are developed by using mechanical stimulation of flow-perfusion into cell-seeded scaffolds. The role of fluid flow is crucial in driving the nutrient to seeded cells and in stimulating cell colonization. A common numerical approach is to use a multiscale model to link some physical quantities (wall shear stress and inlet flow rate) that act at different scales. In this study, a multiscale model is developed in order to determine the optimal inlet flow rate to cultivate osteoblast-like cells seeded in a controlled macroporous biomaterial inside a perfusion bioreactor system. We focus particularly on the influence of Wall Shear Stress on cell colonization to predict cell colonization at the macroscale. Results obtained at the microscale are interpolated at the macroscale to determine the optimal flow rate. For a macroporous scaffold made of interconnected pores with pore diameters of above 350 μm and interconnection diameters of 150 μm, the model predicts a cell colonization of 325% after a 7-day-cell culture with a constant inlet flow rate of 0.69 mL·min^-1. Furthermore, the strength of this protocol is the possibility to adapt it to most porous biomaterials and dynamic cell culture systems.

Non-contact mechanical and chemical analysis of single living cells by microspectroscopic techniques

Innovative label-free microspectroscopy, which can simultaneously collect Brillouin and Raman signals, is used to characterize the viscoelastic properties and chemical composition of living cells with sub-micrometric resolution. The unprecedented statistical accuracy of the data combined with the high-frequency resolution and the high contrast of the recently built experimental setup permits the study of single living cells immersed in their buffer solution by contactless measurements. The Brillouin signal is deconvoluted in the buffer and the cell components, thereby revealing the mechanical heterogeneity inside the cell. In particular, a 20% increase is observed in the elastic modulus passing from the plasmatic membrane to the nucleus as distinguished by comparison with the Raman spectroscopic marker. Brillouin line shape analysis is even more relevant for the comparison of cells under physiological and pathological conditions. Following oncogene expression, cells show an overall reduction in the elastic modulus (15%) and apparent viscosity (50%). In a proof-of-principle experiment, the ability of this spectroscopic technique to characterize subcellular compartments and distinguish cell status was successfully tested. The results strongly support the future application of this technique for fundamental issues in the biomedical field.

Ultrastructural characteristics of ovine bone marrow-derived mesenchymal stromal cells cultured with a silicon stabilized tricalcium phosphate bioceramic

Bioceramics are being used in experimental bone engineering application in association with bone marrow derived mesenchymal stem cells (BM-MSCs) as a new therapeutic tool, but their effects on the ultrastructure of BM-MSCs are yet unknown. In this study we report the morphological features of ovine (o)BM-MSCs cultured with Skelite, a resorbable bioceramic based on silicon stabilized tricalcium phosphate (SiTCP), able to promote the repair of induced bone defect in sheep model. oBM-MSCs were isolated from the iliac crest, cultured until they reached near-confluence and incubated with SiTCP. After 48 hr the monolayers were highly damaged and only few cells adhered to the plastic. Thus, SiTCP was removed, and after washing the cells were cultured until they became confluent. Then, they were trypsinizated and processed for transmission electron microscopy (TEM) and RT-PCR analysis. RT-PCR displayed that oBM-MSCs express typical surface marker for MSCs. TEM revealed the presence of electron-lucent cells and electron-dense cells, both expressing the CD90 surface antigen. The prominent feature of electron-lucent cells was the concentration of cytoplasmic organelles around the nucleus as well as large surface blebs containing glycogen or profiles of endoplasmic reticulum. The dark cells had a multilocular appearance by the presence of peripheral vacuoles. Some dark cells contained endocytic vesicles, lysosomes, and glycogen aggregates. oBM-MSCs showed different types of specialized interconnections. The comparison with ultrastructural features of untreated oBM-MSCs suggests the light and dark cells are two distinct cell types which were differently affected by SiTCP bioceramic. Skelite cultured ovine BM-MSCs display electron-dense and electron-lucent cells which are differently affected by this bioceramic. This suggests that they could play a different role in bioceramic based therapy.