1
|
Altundag Ö, Öteyaka MÖ, Çelebi-Saltik B. Co- and Triaxial Electrospinning for Stem Cell-based Bone Regeneration. Curr Stem Cell Res Ther 2024; 19:865-878. [PMID: 37594104 DOI: 10.2174/1574888x18666230818094216] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/21/2023] [Revised: 07/06/2023] [Accepted: 07/19/2023] [Indexed: 08/19/2023]
Abstract
Bone tissue is composed of organic minerals and cells. It has the capacity to heal for certain minor damages, but when the bone defects surpass the critical threshold, they need fixing. Bone regeneration through natural and synthetic biodegradable materials requires various steps, such as manufacturing methods and materials selection. A successful biodegradable bone graft should have a high surface area/ volume ratio, strength, and a biocompatible, porous structure capable of promoting cell adhesion, proliferation, and differentiation. Considering these requirements, the electrospinning technique is promising for creating functional nano-sized scaffolds. The multi-axial methods, such as coaxial and triaxial electrospinning, are the most popular techniques to produce double or tri-layered scaffolds, respectively. Recently, stem cell culture on scaffolds and the application of osteogenic differentiation protocols on these scaffolds have opened new possibilities in the field of biomaterials research. This review discusses an overview of the progress in coaxial and triaxial technology through biodegradable composite bone materials. The review also carefully elaborates the osteogenic differentiation using stem cells and their performance with nano-sized scaffolds.
Collapse
Affiliation(s)
- Özlem Altundag
- Department of Stem Cell Sciences, Graduate School of Health Sciences, Hacettepe University, Ankara, Turkey
- Center for Stem Cell Research and Development, Hacettepe University, Ankara, Turkey
| | - Mustafa Özgür Öteyaka
- Department of Electronic and Automation, Mechatronic Program, Eskisehir Vocational School, Eskisehir Osmangazi University, Eskisehir, Turkey
| | - Betül Çelebi-Saltik
- Department of Stem Cell Sciences, Graduate School of Health Sciences, Hacettepe University, Ankara, Turkey
- Center for Stem Cell Research and Development, Hacettepe University, Ankara, Turkey
| |
Collapse
|
2
|
Zhang J, Huang Y, Wang Y, Xu J, Huang T, Luo X. Construction of biomimetic cell-sheet-engineered periosteum with a double cell sheet to repair calvarial defects of rats. J Orthop Translat 2022; 38:1-11. [PMID: 36313975 PMCID: PMC9582589 DOI: 10.1016/j.jot.2022.09.005] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 06/19/2022] [Revised: 08/31/2022] [Accepted: 09/09/2022] [Indexed: 11/06/2022] Open
Abstract
Background The periosteum plays a crucial role in the development and injury healing process of bone. The purpose of this study was to construct a biomimetic periosteum with a double cell sheet for bone tissue regeneration. Methods In vitro, the human amniotic mesenchymal stem cells (hAMSCs) sheet was first fabricated by adding 50 μg/ml ascorbic acid to the cell sheet induction medium. Characterization of the hAMSCs sheet was tested by general observation, microscopic observation, live/dead staining, scanning electron microscopy (SEM) and hematoxylin and eosin (HE) staining. Afterwards, the osteogenic cell sheet and vascular cell sheet were constructed and evaluated by general observation, alkaline phosphatase (ALP) staining, Alizarin Red S staining, SEM, live/dead staining and CD31 immunofluorescent staining for characterization. Then, we prepared the double cell sheet. In vivo, rat calvarial defect model was introduced to verify the regeneration of bone defects treated by different methods. Calvarial defects (diameter: 4 mm) were created of Sprague–Dawley rats. The rats were randomly divided into 4 groups: the control group, the osteogenic cell sheet group, the vascular cell sheet group and the double cell sheet group. Macroscopic, micro-CT and histological evaluations of the regenerated bone were performed to assess the treatment results at 8 weeks and 12 weeks after surgery. Results In vitro, hAMSCs sheet was successfully prepared. The hAMSCs sheet consisted of a large number of live hAMSCs and abundant extracellular matrix (ECM) that secreted by hAMSCs, as evidenced by macroscopic/microscopic observation, live/dead staining, SEM and HE staining. Besides, the osteogenic cell sheet and the vascular cell sheet were successfully prepared, which were verified by general observation, ALP staining, Alizarin Red S staining, SEM and CD31 immunofluorescent staining. In vivo, the macroscopic observation and micro-CT results both demonstrated that the double cell sheet group had better effect on bone regeneration than other groups. In addition, histological assessments indicated that large amounts of new bone had formed in the calvarial defects and more mature collagen in the double cell sheet group. Conclusion The double cell sheet could promote to repair calvarial defects of rats and accelerate bone regeneration. The translational potential of this article We successfully constructed a biomimetic cell-sheet-engineered periosteum with a double cell sheet by a simple, low-cost and effective method. This biomimetic periosteum may be a promising therapeutic strategy for the treatment of bone defects, which may be used in clinic in the future.
Collapse
Key Words
- Biomimetic periosteum
- Bone regeneration
- Double cell sheet
- Osteogenic cell sheet
- Trabecular number, Tb.N
- Trabecular thickness, Tb.Th
- Vascular cell sheet
- adiposetissue derivedstromalcells, ADSCs
- alkaline phosphatase, ALP
- bone mineral density, BMD
- bonemarrowmesenchymlstemcells, BMSCs
- bonevolume fraction, BV/TV
- cell sheet technology, CST
- cytokeratin 19, CK-19
- extracellular matrix, ECM
- hAMSCs sheet
- hematoxylin and eosin, HE
- human amniotic mesenchymal stem cells, hAMSCs
- human ethmoid sinus mucosa derived mesenchymal stem cells, hESMSCs
- periodontal ligament-derived cells, PDLCs
- polylactic-co-glycolic acid, PLGA
- scanning electron microscopy, SEM
Collapse
|
3
|
Stich T, Alagboso F, Křenek T, Kovářík T, Alt V, Docheva D. Implant-bone-interface: Reviewing the impact of titanium surface modifications on osteogenic processes in vitro and in vivo. Bioeng Transl Med 2022; 7:e10239. [PMID: 35079626 PMCID: PMC8780039 DOI: 10.1002/btm2.10239] [Citation(s) in RCA: 34] [Impact Index Per Article: 17.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2021] [Revised: 06/08/2021] [Accepted: 06/13/2021] [Indexed: 12/12/2022] Open
Abstract
Titanium is commonly and successfully used in dental and orthopedic implants. However, patients still have to face the risk of implant failure due to various reasons, such as implant loosening or infection. The risk of implant loosening can be countered by optimizing the osteointegration capacity of implant materials. Implant surface modifications for structuring, roughening and biological activation in favor for osteogenic differentiation have been vastly studied. A key factor for a successful stable long-term integration is the initial cellular response to the implant material. Hence, cell-material interactions, which are dependent on the surface parameters, need to be considered in the implant design. Therefore, this review starts with an introduction to the basics of cell-material interactions as well as common surface modification techniques. Afterwards, recent research on the impact of osteogenic processes in vitro and vivo provoked by various surface modifications is reviewed and discussed, in order to give an update on currently applied and developing implant modification techniques for enhancing osteointegration.
Collapse
Affiliation(s)
- Theresia Stich
- Experimental Trauma Surgery, Department of Trauma SurgeryUniversity Regensburg Medical CentreRegensburgGermany
| | - Francisca Alagboso
- Experimental Trauma Surgery, Department of Trauma SurgeryUniversity Regensburg Medical CentreRegensburgGermany
| | - Tomáš Křenek
- New Technologies Research CentreUniversity of West BohemiaPilsenCzech Republic
| | - Tomáš Kovářík
- New Technologies Research CentreUniversity of West BohemiaPilsenCzech Republic
| | - Volker Alt
- Experimental Trauma Surgery, Department of Trauma SurgeryUniversity Regensburg Medical CentreRegensburgGermany
- Clinic and Polyclinic for Trauma Surgery, University Regensburg Medical CentreRegensburgGermany
| | - Denitsa Docheva
- Experimental Trauma Surgery, Department of Trauma SurgeryUniversity Regensburg Medical CentreRegensburgGermany
| |
Collapse
|
4
|
López-González I, Zamora-Ledezma C, Sanchez-Lorencio MI, Tristante Barrenechea E, Gabaldón-Hernández JA, Meseguer-Olmo L. Modifications in Gene Expression in the Process of Osteoblastic Differentiation of Multipotent Bone Marrow-Derived Human Mesenchymal Stem Cells Induced by a Novel Osteoinductive Porous Medical-Grade 3D-Printed Poly(ε-caprolactone)/β-tricalcium Phosphate Composite. Int J Mol Sci 2021; 22:11216. [PMID: 34681873 PMCID: PMC8537621 DOI: 10.3390/ijms222011216] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/15/2021] [Revised: 10/01/2021] [Accepted: 10/15/2021] [Indexed: 01/08/2023] Open
Abstract
In this work, we evaluated the influence of a novel hybrid 3D-printed porous composite scaffold based on poly(ε-caprolactone) (PCL) and β-tricalcium phosphate (β-TCP) microparticles in the process of adhesion, proliferation, and osteoblastic differentiation of multipotent adult human bone marrow mesenchymal stem cells (ah-BM-MSCs) cultured under basal and osteogenic conditions. The in vitro biological response of ah-BM-MSCs seeded on the scaffolds was evaluated in terms of cytotoxicity, adhesion, and proliferation (AlamarBlue Assay®) after 1, 3, 7, and 14 days of culture. The osteogenic differentiation was assessed by alkaline phosphatase (ALP) activity, mineralization (Alizarin Red Solution, ARS), expression of surface markers (CD73, CD90, and CD105), and reverse transcription-quantitative polymerase chain reaction (qRT-PCR) after 7 and 14 days of culture. The scaffolds tested were found to be bioactive and biocompatible, as demonstrated by their effects on cytotoxicity (viability) and extracellular matrix production. The mineralization and ALP assays revealed that osteogenic differentiation increased in the presence of PCL/β-TCP scaffolds. The latter was also confirmed by the gene expression levels of the proteins involved in the ossification process. Our results suggest that similar bio-inspired hybrid composite materials would be excellent candidates for osteoinductive and osteogenic medical-grade scaffolds to support cell proliferation and differentiation for tissue engineering, which warrants future in vivo research.
Collapse
Affiliation(s)
- Ivan López-González
- Tissue Regeneration and Repair Group, Orthobiology, Biomaterials and Tissue Engineering, Campus de los Jerónimos 135, UCAM-Universidad Católica de Murcia, Guadalupe, 30107 Murcia, Spain;
| | - Camilo Zamora-Ledezma
- Tissue Regeneration and Repair Group, Orthobiology, Biomaterials and Tissue Engineering, Campus de los Jerónimos 135, UCAM-Universidad Católica de Murcia, Guadalupe, 30107 Murcia, Spain;
| | - María Isabel Sanchez-Lorencio
- Biomedical Research Institute of Murcia (IMIB-Arrixaca-UMU), University Clinical Hospital “Virgen de la Arrixaca”, University of Murcia, El Palmar, 30120 Murcia, Spain;
| | | | - José Antonio Gabaldón-Hernández
- Molecular Recognition and Encapsulation Research Group (REM), Health Sciences Department, Campus de los Jerónimos 135, UCAM-Universidad Católica de Murcia, Guadalupe, 30107 Murcia, Spain;
| | - Luis Meseguer-Olmo
- Tissue Regeneration and Repair Group, Orthobiology, Biomaterials and Tissue Engineering, Campus de los Jerónimos 135, UCAM-Universidad Católica de Murcia, Guadalupe, 30107 Murcia, Spain;
| |
Collapse
|
5
|
Grünherz L, Prein C, Winkler T, Kirsch M, Hopfner U, Streichert T, Clausen-Schaumann H, Zustin J, Kirchhof K, Morlock MM, Machens HG, Schilling AF. Osteoidosis leads to altered differentiation and function of osteoclasts. J Cell Mol Med 2020; 24:5665-5674. [PMID: 32283567 PMCID: PMC7214153 DOI: 10.1111/jcmm.15227] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2019] [Revised: 01/28/2020] [Accepted: 01/29/2020] [Indexed: 12/14/2022] Open
Abstract
In patients with osteomalacia, a defect in bone mineralization leads to changed characteristics of the bone surface. Considering that the properties of the surrounding matrix influence function and differentiation of cells, we aimed to investigate the effect of osteoidosis on differentiation and function of osteoclasts. Based on osteomalacic bone biopsies, a model for osteoidosis in vitro (OIV) was established. Peripheral blood mononuclear cells were differentiated to osteoclasts on mineralized surfaces (MS) as internal control and on OIV. We observed a significantly reduced number of osteoclasts and surface resorption on OIV. Atomic force microscopy revealed a significant effect of the altered degree of mineralization on surface mechanics and an unmasking of collagen fibres on the surface. Indeed, coating of MS with RGD peptides mimicked the resorption phenotype observed in OIV, suggesting that the altered differentiation of osteoclasts on OIV might be associated with an interaction of the cells with amino acid sequences of unmasked extracellular matrix proteins containing RGD sequences. Transcriptome analysis uncovered a strong significant up‐regulation of transmembrane glycoprotein TROP2 in osteoclastic cultures on OIV. TROP2 expression on OIV was also confirmed on the protein level and found on the bone surface of patients with osteomalacia. Taken together, our results show a direct influence of the mineralization state of the extracellular matrix surface on differentiation and function of osteoclasts on this surface which may be important for the pathophysiology of osteomalacia and other bone disorders with changed ratio of osteoid to bone.
Collapse
Affiliation(s)
- Lisanne Grünherz
- Experimental Plastic Surgery, Clinic for Plastic and Hand Surgery, Technische Universität München, Munich, Germany.,Center for Applied Tissue Engineering and Regenerative Medicine (CANTER), Munich, Germany
| | - Carina Prein
- Center for Applied Tissue Engineering and Regenerative Medicine (CANTER), Munich, Germany.,Department of Applied Sciences and Mechatronics, Munich University of Applied Sciences, Munich, Germany
| | - Thomas Winkler
- Institute of Biomechanics, Technische Universität Hamburg-Harburg, Hamburg, Germany
| | - Manuela Kirsch
- Experimental Plastic Surgery, Clinic for Plastic and Hand Surgery, Technische Universität München, Munich, Germany
| | - Ursula Hopfner
- Experimental Plastic Surgery, Clinic for Plastic and Hand Surgery, Technische Universität München, Munich, Germany
| | - Thomas Streichert
- Department of Clinical Chemistry, University Hospital of Cologne, Cologne, Germany
| | - Hauke Clausen-Schaumann
- Center for Applied Tissue Engineering and Regenerative Medicine (CANTER), Munich, Germany.,Department of Applied Sciences and Mechatronics, Munich University of Applied Sciences, Munich, Germany
| | - Jozef Zustin
- Gerhard Domagk Institute of Pathology, University Medical Center Muenster, Muenster, Germany
| | | | - Michael M Morlock
- Institute of Biomechanics, Technische Universität Hamburg-Harburg, Hamburg, Germany
| | - Hans-Günter Machens
- Experimental Plastic Surgery, Clinic for Plastic and Hand Surgery, Technische Universität München, Munich, Germany
| | - Arndt Friedrich Schilling
- Experimental Plastic Surgery, Clinic for Plastic and Hand Surgery, Technische Universität München, Munich, Germany.,Department of Trauma Surgery, Orthopedic Surgery and Plastic Surgery, University Medical Center Göttingen, Göttingen, Germany
| |
Collapse
|
6
|
Inomata K, Honda M. Co-Culture of Osteoblasts and Endothelial Cells on a Microfiber Scaffold to Construct Bone-Like Tissue with Vascular Networks. MATERIALS (BASEL, SWITZERLAND) 2019; 12:E2869. [PMID: 31491993 PMCID: PMC6765976 DOI: 10.3390/ma12182869] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/28/2019] [Revised: 09/04/2019] [Accepted: 09/04/2019] [Indexed: 01/01/2023]
Abstract
Bone is based on an elaborate system of mineralization and vascularization. In hard tissue engineering, diverse biomaterials compatible with osteogenesis and angiogenesis have been developed. In the present study, to examine the processes of osteogenesis and angiogenesis, osteoblast-like MG-63 cells were co-cultured with human umbilical vein endothelial cells (HUVECs) on a microfiber scaffold. The percentage of adherent cells on the scaffold was more than 60% compared to the culture plate, regardless of the cell type and culture conditions. Cell viability under both monoculture and co-culture conditions was constantly sustained. During the culture periods, the cells were spread along the fibers and extended pseudopodium-like structures on the microfibers three-dimensionally. Compared to the monoculture results, the alkaline phosphatase activity of the co-culture increased 3-6 fold, whereas the vascular endothelial cell growth factor secretion significantly decreased. Immunofluorescent staining of CD31 showed that HUVECs were well spread along the fibers and formed microcapillary-structures. These results suggest that the activation of HUVECs by co-culture with MG-63 could enhance osteoblastic differentiation in the microfiber scaffold, which mimics the microenvironment of the extracellular matrix. This approach can be effective for the construction of tissue-engineered bone with vascular networks.
Collapse
Affiliation(s)
- Kouki Inomata
- Department of Applied Chemistry, School of Science and Technology, Meiji University, 1-1-1 Higashimita, Tama-ku, Kawasaki, Kanagawa 214-8571, Japan.
| | - Michiyo Honda
- Department of Applied Chemistry, School of Science and Technology, Meiji University, 1-1-1 Higashimita, Tama-ku, Kawasaki, Kanagawa 214-8571, Japan.
| |
Collapse
|
7
|
Das EC, Dhawan S, Babu J, Anil Kumar PR, Kumary TV, Haridas V, Komath M. Self‐assembling polymeric dendritic peptide as functional osteogenic matrix for periodontal regeneration scaffolds—an in vitro study. J Periodontal Res 2019; 54:468-480. [DOI: 10.1111/jre.12647] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/11/2018] [Revised: 01/17/2019] [Accepted: 02/11/2019] [Indexed: 01/09/2023]
Affiliation(s)
- Eva C. Das
- Biomedical Technology WingSree Chitra Tirunal Institute of Medical Sciences and Technology Thiruvananthapuram India
| | - Sameer Dhawan
- Department of ChemistryIndian Institute of Technology Delhi New Delhi India
| | - Jisha Babu
- Department of ChemistryIndian Institute of Technology Delhi New Delhi India
| | - PR Anil Kumar
- Biomedical Technology WingSree Chitra Tirunal Institute of Medical Sciences and Technology Thiruvananthapuram India
| | - Thrikkovil Variathu Kumary
- Biomedical Technology WingSree Chitra Tirunal Institute of Medical Sciences and Technology Thiruvananthapuram India
| | - V Haridas
- Department of ChemistryIndian Institute of Technology Delhi New Delhi India
| | - Manoj Komath
- Biomedical Technology WingSree Chitra Tirunal Institute of Medical Sciences and Technology Thiruvananthapuram India
| |
Collapse
|
8
|
Janarthanan G, Kim IG, Chung EJ, Noh I. Comparative studies on thin polycaprolactone-tricalcium phosphate composite scaffolds and its interaction with mesenchymal stem cells. Biomater Res 2019; 23:1. [PMID: 30788137 PMCID: PMC6318878 DOI: 10.1186/s40824-018-0153-7] [Citation(s) in RCA: 57] [Impact Index Per Article: 11.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2018] [Accepted: 12/20/2018] [Indexed: 12/12/2022] Open
Abstract
Background Hybrid scaffolds combining biodegradable polymers and ceramic particles for control of cell adhesion and proliferation are interesting materials for tissue engineering applications. Combinations of biodegradable polymers and ceramics are to provide higher beneficial functionalities to tissue engineering scaffolds with addition of different cell specific bio-factors. Many such hybrid combinations have been reported by several researchers around the world by using various methods and solvents as well as bioactive matrix polymers to fabricate such biomaterials. However, thin hybrid scaffolds with high porosity, cell adhesion factors and biodegradability, as well as the ability to support stem cells often require tedious processes like electrospinning, freeze drying, etc. A simple method to develop porous biodegradable hybrid scaffolds with proper cell adhesion factors is still the need of the hour in tissue engineering and regenerative medicine. Method Thin biodegradable poly(ε-caprolactone) (PCL) based hybrid scaffolds were developed in combination with α-tricalcium phosphate (TCP) particles, gelatin and fibronectin separately and the fabricated scaffolds were evaluated systematically using human mesenchymal stem cells (hMSCs) for tissue engineering applications. A simple modified solvent casting method combined with gas foaming process was used to develop porous thin hybrid structures and compared their properties with those of corresponding non-porous hybrid scaffolds. The TCP particles distribution, morphology, biodegradability and functional groups of the different hybrid scaffolds were analyzed using energy-dispersive X-ray spectroscopy (EDX), light microscopy/scanning electron microscopy (SEM), buffer solutions and Fourier-transform infrared spectroscopy (FTIR), respectively The cellular and tissue regeneration behaviors such as in vitro cell attachment (live/dead assay), cell proliferation (CCK-8 assay) and histological studies were performed using hMSCs. Results Thin PCL-based hybrid scaffolds were fabricated using modified solvent casting method. Homogeneous distribution of TCP particles in the scaffolds were confirmed by EDX. Cellular interactions of the hybrid scaffolds demonstrated overall higher cell adhesion, proliferation and tissue regeneration on the non-porous thin films of PCL-TCP, PCL-TCP-gelatin and PCL-TCP-fibronectin. Coating of fibronectin was remarkable in induction of cell adhesion and proliferation. Conclusions The experimental results revealed that diversely designed PCL-TCP thin hybrid films showed high cell interaction and proliferation with hMSCs. From the results of the cell viability, attachment, proliferation and histological analyses as well as their biodegradation and coating effects, we conclude that these thin PCL-TCP hybrid films are suitable for tissue engineering applications.
Collapse
Affiliation(s)
- Gopinathan Janarthanan
- Department of Chemical and Biomolecular Engineering, Seoul, 01811 Republic of Korea.,2Convergence Institute of Biomedical Engineering and Biomaterials, Seoul National University of Science and Technology, Seoul, 01811 Republic of Korea
| | - In Gul Kim
- 3Department of Otorhinolaryngology-Head and Neck Surgery, Seoul National University Hospital, Seoul, Republic of Korea
| | - Eun-Jae Chung
- 3Department of Otorhinolaryngology-Head and Neck Surgery, Seoul National University Hospital, Seoul, Republic of Korea
| | - Insup Noh
- Department of Chemical and Biomolecular Engineering, Seoul, 01811 Republic of Korea.,2Convergence Institute of Biomedical Engineering and Biomaterials, Seoul National University of Science and Technology, Seoul, 01811 Republic of Korea
| |
Collapse
|
9
|
Lopes D, Martins-Cruz C, Oliveira MB, Mano JF. Bone physiology as inspiration for tissue regenerative therapies. Biomaterials 2018; 185:240-275. [PMID: 30261426 PMCID: PMC6445367 DOI: 10.1016/j.biomaterials.2018.09.028] [Citation(s) in RCA: 209] [Impact Index Per Article: 34.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/24/2018] [Revised: 09/15/2018] [Accepted: 09/17/2018] [Indexed: 12/14/2022]
Abstract
The development, maintenance of healthy bone and regeneration of injured tissue in the human body comprise a set of intricate and finely coordinated processes. However, an analysis of current bone regeneration strategies shows that only a small fraction of well-reported bone biology aspects has been used as inspiration and transposed into the development of therapeutic products. Specific topics that include inter-scale bone structural organization, developmental aspects of bone morphogenesis, bone repair mechanisms, role of specific cells and heterotypic cell contact in the bone niche (including vascularization networks and immune system cells), cell-cell direct and soluble-mediated contact, extracellular matrix composition (with particular focus on the non-soluble fraction of proteins), as well as mechanical aspects of native bone will be the main reviewed topics. In this Review we suggest a systematic parallelization of (i) fundamental well-established biology of bone, (ii) updated and recent advances on the understanding of biological phenomena occurring in native and injured tissue, and (iii) critical discussion of how those individual aspects have been translated into tissue regeneration strategies using biomaterials and other tissue engineering approaches. We aim at presenting a perspective on unexplored aspects of bone physiology and how they could be translated into innovative regeneration-driven concepts.
Collapse
Affiliation(s)
- Diana Lopes
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago,, 3810 193 Aveiro, Portugal
| | - Cláudia Martins-Cruz
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago,, 3810 193 Aveiro, Portugal
| | - Mariana B Oliveira
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago,, 3810 193 Aveiro, Portugal.
| | - João F Mano
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago,, 3810 193 Aveiro, Portugal.
| |
Collapse
|
10
|
Zhang H, Zhou Y, Zhang W, Wang K, Xu L, Ma H, Deng Y. Construction of vascularized tissue-engineered bone with a double-cell sheet complex. Acta Biomater 2018; 77:212-227. [PMID: 30017924 DOI: 10.1016/j.actbio.2018.07.024] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/15/2017] [Revised: 06/25/2018] [Accepted: 07/10/2018] [Indexed: 12/14/2022]
Abstract
A double-cell sheet (DCS) complex composed of an osteogenic cell sheet and a vascular endothelial cell sheet with osteogenesis and blood vessel formation potential was developed in this study. The osteogenic and vascular endothelial cell sheets were obtained after induced culture of rabbit adipose-derived mesenchymal stem cells. The osteogenic cell sheet showed positive alizarin red, von Kossa, and alkaline phosphatase (ALP) staining. The vascular endothelial cell sheet exhibited visible W-P bodies in the cells, the expression of CD31 was positive, and a vascular mesh structure was spontaneously formed in a Matrigel matrix. The subcutaneous transplantation results for four groups of DCS and DCS-coral hydroxyapatite (CHA) complexes, and the CHA scaffold group in nude mice revealed mineralization of collagen fibers and vascularization in each group at 12 weeks, but the degrees of mineralization and vascularization showed differences among groups. The pattern involving endothelial cell sheets covered with osteogenic cell sheets, group B, exhibited the best results. In addition, the degree of mineralization of the DCS-CHA complexes was more mature than those of the same group of DCS complexes and the CHA scaffold, and the capillary number was greater than those of the same group of DCS complexes and the CHA scaffold. Therefore, the CHA scaffold strengthened the osteogenesis and blood vessel formation potential of the DCS complexes. Meanwhile, the DCS complexes also promoted the osteogenesis and blood vessel formation potential of the CHA scaffold. This study will provide a basis for building vascularized tissue-engineered bone for bone defect therapy. STATEMENT OF SIGNIFICANCE This study developed a double-cell sheet (DCS) complex composed of an osteogenic cell sheet and a vascular endothelial cell sheet with osteogenesis and blood vessel formation potential. Osteogenic and vascular endothelial cell sheets were obtained after induced culture of rabbit adipose-derived mesenchymal stem cells. The DCS complex and DCS-CHA complex exhibited osteogenic and blood vessel formation potential in vivo. CHA enhanced the osteogenesis and blood vessel formation abilities of the DCS complexes in vivo. Meanwhile, the DCS complexes also promoted the osteogenesis and blood vessel formation potential of the CHA scaffold. Group B of the DCS complexes and DCS-CHA complexes exhibited the best osteogenesis and blood vessel formation abilities.
Collapse
|
11
|
Kim JC, Han G, Kim CM, Lee JK. Stability of Agarose Film on Glass Slides under Biochemically Relevant Conditions. B KOREAN CHEM SOC 2018. [DOI: 10.1002/bkcs.11554] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
Affiliation(s)
- Jae Chang Kim
- Department of Chemistry and Green-Nano Materials Research Center; Kyungpook National University; Daegu 41566 Korea
| | - Gyeongyeop Han
- Department of Chemistry and Green-Nano Materials Research Center; Kyungpook National University; Daegu 41566 Korea
| | - Chang Min Kim
- Department of Chemistry and Green-Nano Materials Research Center; Kyungpook National University; Daegu 41566 Korea
| | - Jungkyu K. Lee
- Department of Chemistry and Green-Nano Materials Research Center; Kyungpook National University; Daegu 41566 Korea
| |
Collapse
|
12
|
Hirashima S, Ohta K, Hagihara M, Shimizu M, Kanazawa T, Nakamura KI. Effects of an in Vitro Reconstructed Three-dimensional Hematopoietic Microenvironment on Bone Regeneration in a Rat Calvarial Defect Model. J HARD TISSUE BIOL 2018. [DOI: 10.2485/jhtb.27.185] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
Affiliation(s)
- Shingo Hirashima
- Division of Microscopic and Developmental Anatomy, Department of Anatomy, Kurume University School of Medicine
- Dental and Oral Medical Center, Kurume University School of Medicine
| | - Keisuke Ohta
- Division of Microscopic and Developmental Anatomy, Department of Anatomy, Kurume University School of Medicine
- Advanced Imaging Research Center, Kurume University School of Medicine
| | - Masahiko Hagihara
- Ube Industries, Ltd. Corporate Research and Development, Hagihara Research Group
| | - Motohisa Shimizu
- Ube Industries, Ltd. Corporate Research and Development, Hagihara Research Group
| | - Tomonoshin Kanazawa
- Division of Microscopic and Developmental Anatomy, Department of Anatomy, Kurume University School of Medicine
| | - Kei-ichiro Nakamura
- Division of Microscopic and Developmental Anatomy, Department of Anatomy, Kurume University School of Medicine
| |
Collapse
|
13
|
Datta P, Barui A, Wu Y, Ozbolat V, Moncal KK, Ozbolat IT. Essential steps in bioprinting: From pre- to post-bioprinting. Biotechnol Adv 2018; 36:1481-1504. [PMID: 29909085 DOI: 10.1016/j.biotechadv.2018.06.003] [Citation(s) in RCA: 68] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/07/2018] [Revised: 05/15/2018] [Accepted: 06/10/2018] [Indexed: 12/17/2022]
Abstract
An increasing demand for directed assembly of biomaterials has inspired the development of bioprinting, which facilitates the assembling of both cellular and acellular inks into well-arranged three-dimensional (3D) structures for tissue fabrication. Although great advances have been achieved in the recent decade, there still exist issues to be addressed. Herein, a review has been systematically performed to discuss the considerations in the entire procedure of bioprinting. Though bioprinting is advancing at a rapid pace, it is seen that the whole process of obtaining tissue constructs from this technique involves multiple-stages, cutting across various technology domains. These stages can be divided into three broad categories: pre-bioprinting, bioprinting and post-bioprinting. Each stage can influence others and has a bearing on the performance of fabricated constructs. For example, in pre-bioprinting, tissue biopsy and cell expansion techniques are essential to ensure a large number of cells are available for mass organ production. Similarly, medical imaging is needed to provide high resolution designs, which can be faithfully bioprinted. In the bioprinting stage, compatibility of biomaterials is needed to be matched with solidification kinetics to ensure constructs with high cell viability and fidelity are obtained. On the other hand, there is a need to develop bioprinters, which have high degrees of freedom of movement, perform without failure concerns for several hours and are compact, and affordable. Finally, maturation of bioprinted cells are governed by conditions provided during the post-bioprinting process. This review, for the first time, puts all the bioprinting stages in perspective of the whole process of bioprinting, and analyzes their current state-of-the art. It is concluded that bioprinting community will recognize the relative importance and optimize the parameter of each stage to obtain the desired outcomes.
Collapse
Affiliation(s)
- Pallab Datta
- Centre for Healthcare Science and Technology, Indian Institute of Engineering Science and Technology Shibpur, Howrah 711103, West Bengal, India
| | - Ananya Barui
- Centre for Healthcare Science and Technology, Indian Institute of Engineering Science and Technology Shibpur, Howrah 711103, West Bengal, India
| | - Yang Wu
- Engineering Science and Mechanics Department, Penn State University, University Park, PA 16802, USA; The Huck Institutes of the Life Sciences, Penn State University, University Park, PA 16802, USA
| | - Veli Ozbolat
- Engineering Science and Mechanics Department, Penn State University, University Park, PA 16802, USA; The Huck Institutes of the Life Sciences, Penn State University, University Park, PA 16802, USA; Ceyhan Engineering Faculty, Cukurova University, Adana 01950, Turkey
| | - Kazim K Moncal
- Engineering Science and Mechanics Department, Penn State University, University Park, PA 16802, USA; The Huck Institutes of the Life Sciences, Penn State University, University Park, PA 16802, USA
| | - Ibrahim T Ozbolat
- Engineering Science and Mechanics Department, Penn State University, University Park, PA 16802, USA; The Huck Institutes of the Life Sciences, Penn State University, University Park, PA 16802, USA; Biomedical Engineering Department, Penn State University, University Park, PA 16802, USA; Materials Research Institute, Penn State University, University Park, PA 16802, USA.
| |
Collapse
|
14
|
Bicho D, Pina S, Oliveira JM, Reis RL. In Vitro Mimetic Models for the Bone-Cartilage Interface Regeneration. ADVANCES IN EXPERIMENTAL MEDICINE AND BIOLOGY 2018; 1059:373-394. [PMID: 29736583 DOI: 10.1007/978-3-319-76735-2_17] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
In embryonic development, pure cartilage structures are in the basis of bone-cartilage interfaces. Despite this fact, the mature bone and cartilage structures can vary greatly in composition and function. Nevertheless, they collaborate in the osteochondral region to create a smooth transition zone that supports the movements and forces resulting from the daily activities. In this sense, all the hierarchical organization is involved in the maintenance and reestablishment of the equilibrium in case of damage. Therefore, this interface has attracted a great deal of interest in order to understand the mechanisms of regeneration or disease progression in osteoarthritis. With that purpose, in vitro tissue models (either static or dynamic) have been studied. Static in vitro tissue models include monocultures, co-cultures, 3D cultures, and ex vivo cultures, mostly cultivated in flat surfaces, while dynamic models involve the use of bioreactors and microfluidic systems. The latter have emerged as alternatives to study the cellular interactions in a more authentic manner over some disadvantages of the static models. The current alternatives of in vitro mimetic models for bone-cartilage interface regeneration are overviewed and discussed herein.
Collapse
Affiliation(s)
- Diana Bicho
- 3B's Research Group - Biomaterials, Biodegradables and Biomimetics, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, University of Minho, Barco, Guimarães, Portugal.
- ICVS/3B's - PT Government Associate Laboratory, Braga, Guimarães, Portugal.
| | - Sandra Pina
- ICVS/3B's - PT Government Associate Laboratory, Braga, Guimarães, Portugal
| | - J Miguel Oliveira
- ICVS/3B's - PT Government Associate Laboratory, Braga, Guimarães, Portugal
- The Discoveries Centre for Regenerative and Precision Medicine, Headquarters at University of Minho, Guimarães, Portugal
| | - Rui L Reis
- ICVS/3B's - PT Government Associate Laboratory, Braga, Guimarães, Portugal
- The Discoveries Centre for Regenerative and Precision Medicine, Headquarters at University of Minho, Guimarães, Portugal
| |
Collapse
|
15
|
Hayrapetyan A, Surjandi S, Lemsom EEPJ, Wolters MMMW, Jansen JA, van den Beucken JJJP. Coculture effects on the osteogenic differentiation of human mesenchymal stromal cells. Tissue Eng Regen Med 2016; 13:713-723. [PMID: 30603452 DOI: 10.1007/s13770-016-0008-z] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/15/2016] [Revised: 03/04/2016] [Accepted: 03/10/2016] [Indexed: 12/16/2022] Open
Abstract
Cell-based bone regeneration is generally pursued based on single cell type approaches, for which human adipose tissue-derived mesenchymal stromal cells (AT-MSCs) are frequently used, owing to their easy accessibility and relatively large yield. In view of multiple cell types involved in physiological bone regeneration, this study aimed to evaluate the osteogenic differentiation of AT-MSCs upon co-culture with endothelial cells or macrophages in a direct or indirect in vitro co-culture set-up. Our hypotheses were that 1) endothelial cells and macrophages stimulate AT-MSCs proliferation and osteogenic differentiation and that 2) these two cell types will more profoundly affect osteogenic differentiation of AT-MSCs in a direct compared to an indirect co-culture set-up, because of the possibility for both cell-cell interactions and effects of secreted soluble factors in the former. Osteogenic differentiation of AT-MSCs was stimulated by endothelial cells, particularly in direct co-cultures. Although initial numbers of AT-MSCs in co-culture with endothelial cells were 50% compared to monoculture controls, equal levels of mineralization were achieved. Macrophages showed a variable effect on AT-MSCs behavior for indirect co-cultures and a negative effect on osteogenic differentiation of AT-MSCs in direct co-cultures, the latter likely due to species differences of the cell types used. The results of this study demonstrate potential for cell combination strategies in bone regenerative therapies.
Collapse
Affiliation(s)
| | - Soraya Surjandi
- 1Department of Biomaterials, Radboudumc, Nijmegen, the Netherlands
| | | | | | - John A Jansen
- 1Department of Biomaterials, Radboudumc, Nijmegen, the Netherlands
| | - Jeroen J J P van den Beucken
- 1Department of Biomaterials, Radboudumc, Nijmegen, the Netherlands.,2Department of Biomaterials (309), Radboudumc, Ph van Leijdenlaan 25, Nijmegen, 6525 the Netherlands
| |
Collapse
|
16
|
Jeon OH, Panicker LM, Lu Q, Chae JJ, Feldman RA, Elisseeff JH. Human iPSC-derived osteoblasts and osteoclasts together promote bone regeneration in 3D biomaterials. Sci Rep 2016; 6:26761. [PMID: 27225733 PMCID: PMC4881234 DOI: 10.1038/srep26761] [Citation(s) in RCA: 101] [Impact Index Per Article: 12.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/10/2016] [Accepted: 05/03/2016] [Indexed: 12/17/2022] Open
Abstract
Bone substitutes can be designed to replicate physiological structure and function by creating a microenvironment that supports crosstalk between bone and immune cells found in the native tissue, specifically osteoblasts and osteoclasts. Human induced pluripotent stem cells (hiPSC) represent a powerful tool for bone regeneration because they are a source of patient-specific cells that can differentiate into all specialized cell types residing in bone. We show that osteoblasts and osteoclasts can be differentiated from hiPSC-mesenchymal stem cells and macrophages when co-cultured on hydroxyapatite-coated poly(lactic-co-glycolic acid)/poly(L-lactic acid) (HA–PLGA/PLLA) scaffolds. Both cell types seeded on the PLGA/PLLA especially with 5% w/v HA recapitulated the tissue remodeling process of human bone via coupling signals coordinating osteoblast and osteoclast activity and finely tuned expression of inflammatory molecules, resulting in accelerated in vitro bone formation. Following subcutaneous implantation in rodents, co-cultured hiPSC-MSC/-macrophage on such scaffolds showed mature bone-like tissue formation. These findings suggest the importance of coupling matrix remodeling through osteoblastic matrix deposition and osteoclastic tissue resorption and immunomodulation for tissue development.
Collapse
Affiliation(s)
- Ok Hee Jeon
- Translational Tissue Engineering Center, Wilmer Eye Institute and the Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD, USA
| | - Leelamma M Panicker
- Department of Microbiology and Immunology, University of Maryland School of Medicine, Baltimore, MD, USA
| | - Qiaozhi Lu
- Translational Tissue Engineering Center, Wilmer Eye Institute and the Department of Materials Science and Engineering, Johns Hopkins University, Baltimore, MD, USA
| | - Jeremy J Chae
- Translational Tissue Engineering Center, Wilmer Eye Institute and the Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD, USA
| | - Ricardo A Feldman
- Department of Microbiology and Immunology, University of Maryland School of Medicine, Baltimore, MD, USA
| | - Jennifer H Elisseeff
- Translational Tissue Engineering Center, Wilmer Eye Institute and the Department of Biomedical Engineering, Johns Hopkins University, Baltimore, MD, USA
| |
Collapse
|
17
|
Rosa J, Tiago DM, Marques CL, Vijayakumar P, Fonseca L, Cancela ML, Laizé V. Central role of betaine-homocysteine S-methyltransferase 3 in chondral ossification and evidence for sub-functionalization in neoteleost fish. Biochim Biophys Acta Gen Subj 2016; 1860:1373-87. [PMID: 27036080 DOI: 10.1016/j.bbagen.2016.03.034] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2016] [Revised: 03/21/2016] [Accepted: 03/28/2016] [Indexed: 11/26/2022]
Abstract
BACKGROUND To better understand the complex mechanisms of bone formation it is fundamental that genes central to signaling/regulatory pathways and matrix formation are identified. Cell systems were used to analyze genes differentially expressed during extracellular matrix mineralization and bhmt3, coding for a betaine-homocysteine S-methyltransferase, was shown to be down-regulated in mineralizing gilthead seabream cells. METHODS Levels and sites of bhmt3 expression were determined by qPCR and in situ hybridization throughout seabream development and in adult tissues. Transcriptional regulation of bhmt3 was assessed from the activity of promoter constructs controlling luciferase gene expression. Molecular phylogeny of vertebrate BHMT was determined from maximum likelihood analysis of available sequences. RESULTS bhmt3 transcript is abundant in calcified tissues and localized in cartilaginous structures undergoing endo/perichondral ossification. Promoter activity is regulated by transcription factors involved in bone and cartilage development, further demonstrating the central role of Bhmt3 in chondrogenesis and/or osteogenesis. Molecular phylogeny revealed the explosive diversity of bhmt genes in neoteleost fish, while tissue distribution of bhmt genes in seabream suggested that neoteleostean Bhmt may have undergone several steps of sub-functionalization. CONCLUSIONS Data on bhmt3 gene expression and promoter activity evidences a novel function for betaine-homocysteine S-methyltransferase in bone and cartilage development, while phylogenetic analysis provides new insights into the evolution of vertebrate BHMTs and suggests that multiple gene duplication events occurred in neoteleost fish lineage. GENERAL SIGNIFICANCE High and specific expression of Bhmt3 in gilthead seabream calcified tissues suggests that bone-specific betaine-homocysteine S-methyltransferases could represent a suitable marker of chondral ossification.
Collapse
Affiliation(s)
- Joana Rosa
- Centre of Marine Sciences (CCMAR), University of Algarve, Faro, Portugal; PhD Program in Biomedical Sciences, Department of Biomedical Sciences and Medicine (DCBM), University of Algarve, Faro, Portugal
| | - Daniel M Tiago
- Centre of Marine Sciences (CCMAR), University of Algarve, Faro, Portugal
| | - Cátia L Marques
- Centre of Marine Sciences (CCMAR), University of Algarve, Faro, Portugal
| | | | - Luis Fonseca
- Centre of Marine Sciences (CCMAR), University of Algarve, Faro, Portugal
| | - M Leonor Cancela
- Centre of Marine Sciences (CCMAR), University of Algarve, Faro, Portugal; Department of Biomedical Sciences and Medicine (DCBM), University of Algarve, Faro, Portugal
| | - Vincent Laizé
- Centre of Marine Sciences (CCMAR), University of Algarve, Faro, Portugal.
| |
Collapse
|
18
|
Mihaila SM, Resende MF, Reis RL, Gomes ME, Marques AP. Interactive endothelial phenotype maintenance and osteogenic differentiation of adipose tissue stromal vascular fraction SSEA-4+-derived cells. J Tissue Eng Regen Med 2015; 11:1998-2013. [DOI: 10.1002/term.2096] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/25/2015] [Revised: 07/29/2015] [Accepted: 09/15/2015] [Indexed: 01/07/2023]
Affiliation(s)
- Silvia M. Mihaila
- 3Bs Research Group, Biomaterials, Biodegradables and Biomimetics; University of Minho; Barco GMR Portugal
- ICVS/3Bs; PT Government Associated Laboratory; Braga Guimarães Portugal
| | - Margarida F. Resende
- 3Bs Research Group, Biomaterials, Biodegradables and Biomimetics; University of Minho; Barco GMR Portugal
- ICVS/3Bs; PT Government Associated Laboratory; Braga Guimarães Portugal
| | - Rui L. Reis
- 3Bs Research Group, Biomaterials, Biodegradables and Biomimetics; University of Minho; Barco GMR Portugal
- ICVS/3Bs; PT Government Associated Laboratory; Braga Guimarães Portugal
| | - Manuela E. Gomes
- 3Bs Research Group, Biomaterials, Biodegradables and Biomimetics; University of Minho; Barco GMR Portugal
- ICVS/3Bs; PT Government Associated Laboratory; Braga Guimarães Portugal
| | - Alexandra P. Marques
- 3Bs Research Group, Biomaterials, Biodegradables and Biomimetics; University of Minho; Barco GMR Portugal
- ICVS/3Bs; PT Government Associated Laboratory; Braga Guimarães Portugal
| |
Collapse
|
19
|
Mihaila SM, Popa EG, Reis RL, Marques AP, Gomes ME. Fabrication of endothelial cell-laden carrageenan microfibers for microvascularized bone tissue engineering applications. Biomacromolecules 2014; 15:2849-60. [PMID: 24963559 DOI: 10.1021/bm500036a] [Citation(s) in RCA: 48] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
Recent achievements in the area of tissue engineering (TE) have enabled the development of three-dimensional (3D) cell-laden hydrogels as in vitro platforms that closely mimic the 3D scenario found in native tissues. These platforms are extensively used to evaluate cellular behavior, cell-cell interactions, and tissue-like formation in highly defined settings. In this study, we propose a scalable and flexible 3D system based on microsized hydrogel fibers that might be used as building blocks for the establishment of 3D hydrogel constructs for vascularized bone TE applications. For this purpose, chitosan (CHT) coated κ-carrageenan (κ-CA) microfibers were developed using a two-step procedure involving ionotropic gelation (for the fiber formation) of κ-CA and its polyelectrolyte complexation with CHT (for the enhancement of fiber stability). The performance of the obtained fibers was assessed regarding their swelling and stability profiles, as well as their ability to carry and, subsequently, promote the outward release of microvascular-like endothelial cells (ECs), without compromising their viability and phenotype. Finally, the possibility of assembling and integrating these cell-laden fibers within a 3D hydrogel matrix containing osteoblast-like cells was evaluated. Overall, the obtained results demonstrate the suitability of the microsized κ-CA fibers to carry and deliver phenotypically apt microvascular-like ECs. Furthermore, it is shown that it is possible to assemble these cell-laden microsized fibers into 3D heterotypic hydrogels constructs. This in vitro 3D platform provides a versatile approach to investigate the interactions between multiple cell types in controlled settings, which may open up novel 3D in vitro culture techniques to better mimic the complexity of tissues.
Collapse
Affiliation(s)
- Silvia M Mihaila
- 3B's Research Group - Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine , AvePark, 4806-909 Taipas, Guimarães, Portugal
| | | | | | | | | |
Collapse
|
20
|
Endothelial cells enhance the in vivo bone-forming ability of osteogenic cell sheets. J Transl Med 2014; 94:663-73. [PMID: 24709778 DOI: 10.1038/labinvest.2014.55] [Citation(s) in RCA: 31] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2013] [Revised: 01/30/2014] [Accepted: 03/06/2014] [Indexed: 01/20/2023] Open
Abstract
Addressing the problem of vascularization is of vital importance when engineering three-dimensional (3D) tissues. Endothelial cells are increasingly used in tissue-engineered constructs to obtain prevascularization and to enhance in vivo neovascularization. Rat bone marrow stromal cells were cultured in thermoresponsive dishes under osteogenic conditions with human umbilical vein endothelial cells (HUVECs) to obtain homotypic or heterotypic cell sheets (CSs). Cells were retrieved as sheets from the dishes after incubation at 20 °C. Monoculture osteogenic CSs were stacked on top of homotypic or heterotypic CSs, and subcutaneously implanted in the dorsal flap of nude mice for 7 days. The implants showed mineralized tissue formation under both conditions. Transplanted osteogenic cells were found at the new tissue site, demonstrating CS bone-inductive effect. Perfused vessels, positive for human CD31, confirmed the contribution of HUVECs for the neovascularization of coculture CS constructs. Furthermore, calcium quantification and expression of osteocalcin and osterix genes were higher for the CS constructs, with HUVECs demonstrating the more robust osteogenic potential of these constructs. This work demonstrates the potential of using endothelial cells, combined with osteogenic CSs, to increase the in vivo vascularization of CS-based 3D constructs for bone tissue engineering purposes.
Collapse
|
21
|
Detsch R, Boccaccini AR. The role of osteoclasts in bone tissue engineering. J Tissue Eng Regen Med 2014; 9:1133-49. [PMID: 24478169 DOI: 10.1002/term.1851] [Citation(s) in RCA: 85] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/06/2013] [Revised: 09/18/2013] [Accepted: 10/20/2013] [Indexed: 12/13/2022]
Abstract
The success of scaffold-based bone regeneration approaches strongly depends on the performance of the biomaterial utilized. Within the efforts of regenerative medicine towards a restitutio ad integrum (i.e. complete reconstruction of a diseased tissue), scaffolds should be completely degraded within an adequate period of time. The degradation of synthetic bone substitute materials involves both chemical dissolution (physicochemical degradation) and resorption (cellular degradation by osteoclasts). Responsible for bone resorption are osteoclasts, cells of haematopoietic origin. Osteoclasts play also a crucial role in bone remodelling, which is essential for the regeneration of bone defects. There is, however, surprisingly limited knowledge about the detailed effects of osteoclasts on biomaterials degradation behaviour. This review covers the relevant fundamental knowledge and progress made in the field of osteoclast activity related to biomaterials used for bone regeneration. In vitro studies with osteoclastic precursor cells on synthetic bone substitute materials show that there are specific parameters that inhibit or enhance resorption. Moreover, analyses of the bone-material interface reveal that biomaterials composition has a significant influence on their degradation in contact with osteoclasts. Crystallinity, grain size, surface bioactivity and density of the surface seem to have a less significant effect on osteoclastic activity. In addition, the topography of the scaffold surface can be tailored to affect the development and spreading of osteoclast cells. The present review also highlights possible areas on which future research is needed and which are relevant to enhance our understanding of the complex role of osteoclasts in bone tissue engineering.
Collapse
Affiliation(s)
- Rainer Detsch
- Institute of Biomaterials, University of Erlangen-Nuremberg, Germany
| | - Aldo R Boccaccini
- Institute of Biomaterials, University of Erlangen-Nuremberg, Germany
| |
Collapse
|
22
|
Rossi F, Santoro M, Perale G. Polymeric scaffolds as stem cell carriers in bone repair. J Tissue Eng Regen Med 2013; 9:1093-119. [DOI: 10.1002/term.1827] [Citation(s) in RCA: 36] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/06/2012] [Revised: 07/29/2013] [Accepted: 08/30/2013] [Indexed: 12/16/2022]
Affiliation(s)
- Filippo Rossi
- Department of Chemistry, Materials and Chemical Engineering; 'Giulio Natta' Politecnico di Milano; Milan Italy
| | - Marco Santoro
- Department of Chemical and Biomolecular Engineering; Rice University; Houston TX USA
| | - Giuseppe Perale
- Department of Chemistry, Materials and Chemical Engineering; 'Giulio Natta' Politecnico di Milano; Milan Italy
- Department of Innovative Technologies; University of Southern Switzerland; Manno Switzerland
- Swiss Institute for Regenerative Medicine; Taverne Switzerland
| |
Collapse
|
23
|
Lima MJ, Pirraco RP, Sousa RA, Neves NM, Marques AP, Bhattacharya M, Correlo VM, Reis RL. Bottom-up approach to construct microfabricated multi-layer scaffolds for bone tissue engineering. Biomed Microdevices 2013; 16:69-78. [DOI: 10.1007/s10544-013-9806-4] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
24
|
Pirraco RP, Melo-Ferreira B, Santos TC, Frias AM, Marques AP, Reis RL. Adipose stem cell-derived osteoblasts sustain the functionality of endothelial progenitors from the mononuclear fraction of umbilical cord blood. Acta Biomater 2013; 9:5234-42. [PMID: 22995408 DOI: 10.1016/j.actbio.2012.09.013] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/07/2012] [Revised: 09/10/2012] [Accepted: 09/11/2012] [Indexed: 01/14/2023]
Abstract
Vascularization is the most pressing issue in tissue engineering (TE) since ensuring that engineered constructs are adequately perfused after in vivo transplantation is essential for the construct's survival. The combination of endothelial cells with current TE strategies seems the most promising approach but doubts persist as to which type of endothelial cells to use. Umbilical cord blood (UCB) cells have been suggested as a possible source of endothelial progenitors. Osteoblasts obtained from human adipose-derived stem cells (hASCs) were co-cultured with the mononuclear fraction of human UCB for 7 and 21 days on carrageenan membranes. The expression of vWF and CD31, and the DiI-AcLDL uptake ability allowed detection of the presence of endothelial and monocytic lineages cells in the co-culture for all culture times. In addition, the molecular expression of CD31 and VE-cadherin increased after 21 days of co-culture. The functionality of the system was assessed after transplantation in nude mice. Although an inflammatory response developed, blood vessels with cells positive for human CD31 were detected around the membranes. Furthermore, the number of blood vessels in the vicinity of the implants increased when cells from the mononuclear fraction of UCB were present in the transplants compared to transplants with only hASC-derived osteoblasts. These results show how endothelial progenitors present in the mononuclear fraction of UCB can be sustained by hASC-derived osteoblast co-culture and contribute to angiogenesis even in an in vivo setting of inflammatory response.
Collapse
Affiliation(s)
- R P Pirraco
- 3B´s Research Group-Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, 4806-909 Taipas, Guimarães, Portugal.
| | | | | | | | | | | |
Collapse
|
25
|
Santo VE, Gomes ME, Mano JF, Reis RL. Controlled release strategies for bone, cartilage, and osteochondral engineering--Part II: challenges on the evolution from single to multiple bioactive factor delivery. TISSUE ENGINEERING PART B-REVIEWS 2013; 19:327-52. [PMID: 23249320 DOI: 10.1089/ten.teb.2012.0727] [Citation(s) in RCA: 93] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
The development of controlled release systems for the regeneration of bone, cartilage, and osteochondral interface is one of the hot topics in the field of tissue engineering and regenerative medicine. However, the majority of the developed systems consider only the release of a single growth factor, which is a limiting step for the success of the therapy. More recent studies have been focused on the design and tailoring of appropriate combinations of bioactive factors to match the desired goals regarding tissue regeneration. In fact, considering the complexity of extracellular matrix and the diversity of growth factors and cytokines involved in each biological response, it is expected that an appropriate combination of bioactive factors could lead to more successful outcomes in tissue regeneration. In this review, the evolution on the development of dual and multiple bioactive factor release systems for bone, cartilage, and osteochondral interface is overviewed, specifically the relevance of parameters such as dosage and spatiotemporal distribution of bioactive factors. A comprehensive collection of studies focused on the delivery of bioactive factors is also presented while highlighting the increasing impact of platelet-rich plasma as an autologous source of multiple growth factors.
Collapse
Affiliation(s)
- Vítor E Santo
- 3Bs Research Group-Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of European Institute of Excellence on Tissue Engineering and Regenerative Medicine, Guimarães, Portugal
| | | | | | | |
Collapse
|
26
|
Pirraco RP, Cerqueira MT, Reis RL, Marques AP. Fibroblasts regulate osteoblasts through gap junctional communication. Cytotherapy 2012; 14:1276-87. [PMID: 22853696 DOI: 10.3109/14653249.2012.701006] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Abstract
BACKGROUND AIMS Fibroblasts are present in most tissues of the body, playing an active role in the regulation of homeostasis in such tissues. While fibroblast heterotypic interactions are acknowledged in the regeneration of tissues such as skin and periodontal ligament, their role in bone regeneration is far from being understood. We hypothesized that fibroblasts could influence osteoblasts, and as connexin 43 is the predominant connexin in both cell types, we speculated that those heterotypic interactions could occur through gap junctional communication (GjC). METHODS Direct co-cultures of human mesenchymal stromal cell (hMSC)-derived osteoblasts and human dermal fibroblasts (hDFb) were established in the presence and absence of the GjC inhibitor α-glycyrrhetinic acid. Communication between osteoblasts and hDFb via GjC was verified by transference of the gap junction-permeable dye calcein-AM. Cell proliferation was assessed by dsDNA quantification, while osteogenic differentiation was evaluated by measuring alkaline phosphatase (ALP) activity and the expression of osteogenic markers by real-time polymerase chain reaction (PCR). RESULTS The amount of calcein-AM transferred between the different cell types decreased when α-glycyrrhetinic acid was used. While the proliferation of the hMSC-derived osteoblasts was not affected by the presence of the hDFb, the level of osteogenic markers such as ALP activity and osteocalcin in transcripts in osteoblasts was severely diminished. This effect was partially reversed by adding α-glycyrrhetinic acid to the co-cultures. CONCLUSIONS The results strongly suggest that fibroblasts regulate osteoblast behavior partially through GjC. This information could be critical for predicting the outcome of strategies aimed at promoting bone regeneration as, for example, in bone tissue-engineering approaches.
Collapse
Affiliation(s)
- Rogério Pedro Pirraco
- 3B's Research Group, Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, Taipas, Guimarães, Portugal.
| | | | | | | |
Collapse
|
27
|
Oliveira AL, Sun L, Kim HJ, Hu X, Rice W, Kluge J, Reis RL, Kaplan DL. Aligned silk-based 3-D architectures for contact guidance in tissue engineering. Acta Biomater 2012; 8:1530-42. [PMID: 22202909 DOI: 10.1016/j.actbio.2011.12.015] [Citation(s) in RCA: 77] [Impact Index Per Article: 6.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/15/2011] [Revised: 10/24/2011] [Accepted: 12/09/2011] [Indexed: 01/15/2023]
Abstract
An important challenge in the biomaterials field is to mimic the structure of functional tissues via cell and extracellular matrix (ECM) alignment and anisotropy. Toward this goal, silk-based scaffolds resembling bone lamellar structure were developed using a freeze-drying technique. The structure could be controlled directly by solute concentration and freezing parameters, resulting in lamellar scaffolds with regular morphology. Different post-treatments, such as methanol, water annealing and steam sterilization, were investigated to induce water stability. The resulting structures exhibited significant differences in terms of morphological integrity, structure and mechanical properties. The lamellar thicknesses were ∼2.6 μm for the methanol-treated scaffolds and ∼5.8 μm for water-annealed. These values are in the range of those reported for human lamellar bone. Human bone marrow-derived mesenchymal stem cells (hMSC) were seeded on these silk fibroin lamellar scaffolds and grown under osteogenic conditions to assess the effect of the microstructure on cell behavior. Collagen in the newly deposited ECM was found aligned along the lamellar architectures. In the case of methanol-treated lamellar structures, the hMSC were able to migrate into the interior of the scaffolds, producing a multilamellar hybrid construct. The present morphology constitutes a useful pattern onto which hMSC cells attach and proliferate for guided formation of a highly oriented extracellular matrix.
Collapse
Affiliation(s)
- A L Oliveira
- 3B's Research Group - Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, 4806-909 Taipas, Guimarães, Portugal.
| | | | | | | | | | | | | | | |
Collapse
|
28
|
Boos AM, Loew JS, Weigand A, Deschler G, Klumpp D, Arkudas A, Bleiziffer O, Gulle H, Kneser U, Horch RE, Beier JP. Engineering axially vascularized bone in the sheep arteriovenous-loop model. J Tissue Eng Regen Med 2012; 7:654-64. [PMID: 22438065 DOI: 10.1002/term.1457] [Citation(s) in RCA: 58] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/28/2011] [Revised: 10/16/2011] [Accepted: 11/24/2011] [Indexed: 01/10/2023]
Abstract
Treatment of complex bone defects in which vascular supply is insufficient is still a challenge. To overcome the limitations from autologous grafts, a sheep model has been established recently, which is characterized by the development of an independent axial vascularization of a bioartificial construct, permitting microsurgical transplantation. To engineer independently axially vascularized bone tissue in the sheep arteriovenous (AV)-loop model, mesenchymal stem cells (MSCs), without and in combination with recombinant human bone morphogenetic protein-2 (rhBMP-2), were harvested and directly autotransplanted in combination with β-tricalcium phosphate-hydroxyapatite (β-TCP-HA) granules into sheep in this study. After explantation after 12 weeks, histological and immunohistochemical evaluation revealed newly formed bone in both groups. An increased amount of bone area was obtained using directly autotransplanted MSCs with rhBMP-2 stimulation. Osteoblastic and osteoclastic cells were detected adjacent to the newly formed bone, revealing an active bone remodelling process. Directly autotransplanted MSCs can be found close to the β-TCP-HA granules and are contributing to bone formation. Over time, magnetic resonance imaging (MRI) and micro-computed tomography (μCT) imaging confirmed the dense vascularization arising from the AV-loop. This study shows de novo engineering of independently axially vascularized transplantable bone tissue in clinically significant amounts, using directly autotransplanted MSCs and rhBMP-2 stimulation in about 12 weeks in the sheep AV-loop model. This strategy of engineering vascularized transplantable bone tissue could be possibly transferred to the clinic in the future in order to augment current reconstructive strategies.
Collapse
Affiliation(s)
- Anja M Boos
- Department of Plastic and Hand Surgery, University Hospital of Erlangen, Friedrich-Alexander-University of Erlangen-Nürnberg, Germany.
| | | | | | | | | | | | | | | | | | | | | |
Collapse
|
29
|
Pirraco RP, Reis RL, Marques AP. Effect of monocytes/macrophages on the early osteogenic differentiation of hBMSCs. J Tissue Eng Regen Med 2012; 7:392-400. [DOI: 10.1002/term.535] [Citation(s) in RCA: 89] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2011] [Accepted: 10/20/2011] [Indexed: 12/19/2022]
Affiliation(s)
- R. P. Pirraco
- 3B's Research Group - Biomaterials; Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, 4806-909 Taipas, Guimarães; and ICVS/3B's - PT Government Associate Laboratory; Braga/Guimarães; Portugal
| | - R. L. Reis
- 3B's Research Group - Biomaterials; Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, 4806-909 Taipas, Guimarães; and ICVS/3B's - PT Government Associate Laboratory; Braga/Guimarães; Portugal
| | - A. P. Marques
- 3B's Research Group - Biomaterials; Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, 4806-909 Taipas, Guimarães; and ICVS/3B's - PT Government Associate Laboratory; Braga/Guimarães; Portugal
| |
Collapse
|
30
|
Pirraco RP, Obokata H, Iwata T, Marques AP, Tsuneda S, Yamato M, Reis RL, Okano T. Development of Osteogenic Cell Sheets for Bone Tissue Engineering Applications. Tissue Eng Part A 2011; 17:1507-15. [DOI: 10.1089/ten.tea.2010.0470] [Citation(s) in RCA: 55] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023] Open
Affiliation(s)
- Rogério P. Pirraco
- Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University, Tokyo, Japan
- 3B's Research Group—Biomaterials, Biodegradables, and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, Guimarães, Portugal
- PT Government Associated Laboratory, IBB–Institute for Biotechnology and Bioengineering, Guimarães, Portugal
| | - Haruko Obokata
- Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University, Tokyo, Japan
- Graduate School of Science and Engineering, Waseda University, Tokyo, Japan
| | - Takanori Iwata
- Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University, Tokyo, Japan
| | - Alexandra P. Marques
- 3B's Research Group—Biomaterials, Biodegradables, and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, Guimarães, Portugal
- PT Government Associated Laboratory, IBB–Institute for Biotechnology and Bioengineering, Guimarães, Portugal
| | - Satoshi Tsuneda
- Graduate School of Science and Engineering, Waseda University, Tokyo, Japan
| | - Masayuki Yamato
- Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University, Tokyo, Japan
| | - Rui L. Reis
- 3B's Research Group—Biomaterials, Biodegradables, and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, Guimarães, Portugal
- PT Government Associated Laboratory, IBB–Institute for Biotechnology and Bioengineering, Guimarães, Portugal
| | - Teruo Okano
- Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University, Tokyo, Japan
| |
Collapse
|
31
|
Polykandriotis E, Popescu LM, Horch RE. Regenerative medicine: then and now--an update of recent history into future possibilities. J Cell Mol Med 2011; 14:2350-8. [PMID: 20825521 PMCID: PMC3823153 DOI: 10.1111/j.1582-4934.2010.01169.x] [Citation(s) in RCA: 43] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022] Open
Abstract
The fields of tissue engineering (TE) and regenerative medicine (RegMed) are yet to bring about the anticipated therapeutic revolution. After two decades of extremely high expectations and often disappointing returns both in the medical as well as in the financial arena, this scientific field reflects the sense of a new era and suggests the feeling of making a fresh start although many scientists are probably seeking reorientation. Much of research was industry driven, so that especially in the aftermath of the recent financial meltdown in the last 2 years we have witnessed a biotech asset yard sale. Despite any monetary shortcomings, from a technological point of view there have been great leaps that are yet to find their way to the patient. RegMed is definitely bound to play a major role in our life because it embodies one of the primordial dreams of mankind, such as: everlasting youth, flying, remote communication and setting foot on the moon. The Journal of Cellular and Molecular Medicine has been at the frontier of these developments in TE and RegMed from its beginning and reflects recent scientific advances in both fields. Therefore this review tries to look at RegMed through the keyhole of history which might just be like looking ‘back to the future’.
Collapse
Affiliation(s)
- E Polykandriotis
- Department of Plastic and Hand Surgery and Laboratory for Tissue Engineering and Regenerative Medicine, University of Erlangen, Erlangen, Germany
| | | | | |
Collapse
|
32
|
Ambre AH, Katti KS, Katti DR. Nanoclay Based Composite Scaffolds for Bone Tissue Engineering Applications. J Nanotechnol Eng Med 2010. [DOI: 10.1115/1.4002149] [Citation(s) in RCA: 69] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022]
Abstract
Scaffolds based on chitosan/polygalacturonic acid (ChiPgA) complex containing montmorillonite (MMT) clay modified with 5-aminovaleric acid were prepared using freeze-drying technique. The MMT clay was introduced to improve mechanical properties of the scaffold. The microstructure of the scaffolds containing the modified MMT clay was influenced by the incorporation of nanoclays. The MTT assay also indicated that the number of osteoblast cells in ChiPgA scaffolds containing the modified clay was comparable to ChiPgA scaffolds containing hydroxyapatite known for its osteoconductive properties. Overall, the ChiPgA composite scaffolds were found to be biocompatible. This was also indicated by the scanning electron microscopy images of the ChiPgA composite scaffolds seeded with human osteoblast cells. Photoacoustic–Fourier transform infrared (PA-FTIR) experiments on the ChiPgA composite scaffolds indicated formation of a polyelectrolyte complex between chitosan and polygalacturonic acid. PA-FTIR studies also showed that the MMT clay modified with 5-aminovaleric acid was successfully incorporated in the ChiPgA based scaffolds. Swelling studies on ChiPgA composite scaffolds showed the swelling ability of the scaffolds that indicated that the cells and the nutrients would be able to reach the interior parts of the scaffolds. In addition to this, the ChiPgA scaffolds exhibited porosity greater than 90% as appropriate for scaffolds used in tissue engineering studies. High porosity facilitates the nutrient transport throughout the scaffold and also plays a role in the development of adequate vasculature throughout the scaffold. Compressive mechanical tests on the scaffolds showed that the ChiPgA composite scaffolds had compressive elastic moduli in the range of 4–6 MPa and appear to be affected by the high porosity of the scaffolds. Thus, the ChiPgA composite scaffolds containing MMT clay modified with 5-aminovaleric acid are biocompatible. Also, the ChiPgA scaffolds containing the modified MMT clay appears to satisfy some of the basic requirements of scaffolds for tissue engineering applications.
Collapse
Affiliation(s)
- Avinash H. Ambre
- Department of Civil Engineering, North Dakota State University, Fargo, ND 58105
| | - Kalpana S. Katti
- Department of Civil Engineering, North Dakota State University, Fargo, ND 58105
| | - Dinesh R. Katti
- Department of Civil Engineering, North Dakota State University, Fargo, ND 58105
| |
Collapse
|
33
|
Boos AM, Loew JS, Deschler G, Arkudas A, Bleiziffer O, Gulle H, Dragu A, Kneser U, Horch RE, Beier JP. Directly auto-transplanted mesenchymal stem cells induce bone formation in a ceramic bone substitute in an ectopic sheep model. J Cell Mol Med 2010; 15:1364-78. [PMID: 20636333 PMCID: PMC4373324 DOI: 10.1111/j.1582-4934.2010.01131.x] [Citation(s) in RCA: 47] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023] Open
Abstract
Bone tissue engineering approaches increasingly focus on the use of mesenchymal stem cells (MSC). In most animal transplantation models MSC are isolated and expanded before auto cell transplantation which might be critical for clinical application in the future. Hence this study compares the potential of directly auto-transplanted versus in vitro expanded MSC with or without bone morphogenetic protein-2 (BMP-2) to induce bone formation in a large volume ceramic bone substitute in the sheep model. MSC were isolated from bone marrow aspirates and directly auto-transplanted or expanded in vitro and characterized using fluorescence activated cell sorting (FACS) and RT-PCR analysis before subcutaneous implantation in combination with BMP-2 and β-tricalcium phosphate/hydroxyapatite (β-TCP/HA) granules. Constructs were explanted after 1 to 12 weeks followed by histological and RT-PCR evaluation. Sheep MSC were CD29(+), CD44(+) and CD166(+) after selection by Ficoll gradient centrifugation, while directly auto-transplanted MSC-populations expressed CD29 and CD166 at lower levels. Both, directly auto-transplanted and expanded MSC, were constantly proliferating and had a decreasing apoptosis over time in vivo. Directly auto-transplanted MSC led to de novo bone formation in a heterotopic sheep model using a β-TCP/HA matrix comparable to the application of 60 μg/ml BMP-2 only or implantation of expanded MSC. Bone matrix proteins were up-regulated in constructs following direct auto-transplantation and in expanded MSC as well as in BMP-2 constructs. Up-regulation was detected using immunohistology methods and RT-PCR. Dense vascularization was demonstrated by CD31 immunohistology staining in all three groups. Ectopic bone could be generated using directly auto-transplanted or expanded MSC with β-TCP/HA granules alone. Hence BMP-2 stimulation might become dispensable in the future, thus providing an attractive, clinically feasible approach to bone tissue engineering.
Collapse
Affiliation(s)
- Anja M Boos
- Department of Plastic and Hand Surgery, University Hospital of Erlangen, Friedrich-Alexander-University of Erlangen-Nürnberg, Erlangen, Germany
| | | | | | | | | | | | | | | | | | | |
Collapse
|