A systematic review on survival and success rates of implants placed immediately into fresh extraction sockets after at least 1 year

Analysis of the Sagittal Root Position of the Maxillary and Mandibular Anterior Teeth in the Alveolar Bone Using Cone-Beam Computed Tomography

Background/Objectives: The purpose of this study was to measure the bone thickness and angulation of the maxillary and mandibular anterior teeth on the buccal and palatal/lingual sides and also to analyze the sagittal root position (SRP) in the alveolar bone in relation to age and gender using cone-beam computed tomography (CBCT) in an Iraqi subpopulation. Methods: CBCT images of 1200 maxillary and mandibular central and lateral incisors and canines from 100 patients (48 males and 52 females) were retrospectively analyzed. These patients were categorized by age into group I ≤ 25, group II 26-40, and group III ≥ 41 years old. The SRP in the alveolar bone was classified as class I, class II, class III, and class IV, and the buccal type was further classified into subtypes I, II, and III. In addition, the buccolingual inclination of the tooth and buccal/palatal/lingual bone thickness at the coronal, middle, and apical thirds were evaluated and then compared based on age and gender. The data were analyzed using the Pearson chi-square test. Descriptive statistics, Kruskal-Wallis and Mann-Whitney U test were used to compare the thickness and angulation according to the SRP classes. Results: The mean frequency distribution of SRP of maxillary anterior teeth indicated that most of them were located buccally and were classified as (Class I) and subtype (III). Moreover, for mandibular anterior teeth, the majority were classified as (Class IV) and subtype (II). The mean sagittal angulation of maxillary anterior teeth approximately ranged from 5.9 for tooth 12# to 8.2 for teeth 13# and 23#, while for mandibular anterior teeth it ranged from 7.4 for tooth 33# to 10.3 for tooth 41#. The thickness of bone in the apical third of the buccal side of all maxillary and mandibular teeth was significantly related to age (p < 0.05). In the middle third, the thickness of bone in the buccal and palatal side of all maxillary anterior teeth and in the apical third of most mandibular teeth in the lingual side was significantly higher in males (p < 0.05). Conclusions: A majority of the maxillary anterior tooth roots were positioned close to the buccal cortical plate, while most of the mandibular anterior teeth were engaging both the buccal and lingual cortical plates. Males had more alveolar bone thickness for both maxillary and mandibular anterior teeth, and only the apical portion significantly changed with age. CBCT of the buccal and palatal/lingual bone and SRP is recommended for the selection of the appropriate treatment approach and implant placement.

Management of Vestibular Bone Fenestration with Periosteal Inhibition (PI) Technique During Alveolar Socket Preservation: A Case Report

Background and Objectives: The purpose of this case report is to examine the management of vestibular bone fenestration during alveolar socket preservation using the Periosteal Inhibition (PI) approach. Here, for the first time, the PI technique, which has been shown to be successful in maintaining intact cortical bone, is examined in the context of a bone defect. Materials and Methods: After an atraumatic extraction of a damaged tooth, a vestibular bone fenestration was discovered in the 62-year-old male patient. To shield the defect, a non-resorbable PTFE membrane (OSSEO GUARD by Zimmer Biomet) was positioned between the mucosa and the fenestration site. A resorbable porcine gelatin sponge (SPONGOSTANTM) was used to achieve hemostasis, and a 5/0 PGCL absorbable suture was used to close the wound. A CBCT scan was performed, and a dental implant was inserted after 4 months. Results: After 4 months, the case demonstrated positive results, with full cortical remodeling and preservation of the original bone proportions. The fenestration completely healed, proving that the PI approach works even in the presence of bone flaws in cortical bone that is still intact. Conclusions: This is the first case report that shows that vestibular bone fenestration can be successfully treated with the PI approach. It has now been demonstrated that the procedure, which hitherto needed an undamaged cortical bone to work, can help bone abnormalities to repair completely. These results imply that the PI technique is a flexible and useful approach that provides predictable results in dental surgery for treating different types of alveolar bone abnormalities. Its use might be expanded with more study to include bone dehiscence treatment.

Navigating Esthetic Challenges: Immediate Implant Placement and Comprehensive Restorative Solutions-A Clinical Case With 2-Year Follow-Up Study

Introduction: The esthetics of immediate implant dentistry can be challenging. Clinical considerations for immediate implant placement have demonstrated long-term success rates comparable to traditional delayed implant protocols. However, it is a sensitive technique that requires proper treatment planning as well as meticulous execution to be predictable and successful in the long term. Methods: This clinical situation demands extensive knowledge of soft and hard tissue management for atraumatic tooth extraction followed by implant therapy, along with an understanding of the available materials to meet esthetic needs. This case report features a female patient with the chief complaint of needing to replace an anterior crown due to loss of retention. After a comprehensive oral assessment and cone beam computed tomography (CBCT) radiographic examination, it was determined that the crown on Tooth #9 was fractured at the subgingival level. Furthermore, gingival zenith positions displayed differences at the keratinized mucosa level in Teeth #7, #8, and #9, and the metal marginal areas of the porcelain-fused-to-metal (PFM) crowns in the anterior area of Teeth #5, #7, #8, #9, and #10 were apparent. The procedure involved atraumatic extraction of Tooth #9, followed by immediate implant placement. Crowns on Teeth #5, #7, #8, and #10 were replaced, and veneers on Teeth #6 and #11 were fabricated using press lithium disilicate-reinforced ceramic. Connective tissue graft (CTG) was contoured before final implant restorations. Results: The final implant crown was restored using a prefabricated abutment with a titanium base and lithium disilicate ceramic dental material. A well-planned combined treatment, including atraumatic tooth extractions for immediate implants and ideal contouring of soft tissues, can significantly impact the outcome of esthetic restorations. Conclusions: Single immediate implant-supported crowns in the esthetic zone were able to fulfill the patient's esthetic expectations.

Factors influencing labial bone resorption after implant insertion with simultaneous guided bone regeneration: retrospective cone beam computed tomography study

This retrospective study examined factors influencing labial bone resorption in the anterior maxilla 6 months after implant insertion with simultaneous guided bone regeneration. Involving 79 patients (118 implants), the study measured labial horizontal bone width and vertical dimensions using cone beam computed tomography scans taken immediately after surgery and at 6 months. A generalized linear mixed model analyzed potential influencing factors: age, sex, implant site, timing of placement, buccal bone width at the implant platform level post-surgery, implant connection, and bone defect morphology. Significant bone resorption was noted at 6 months. The statistical analysis revealed that buccal bone width at the implant platform, implant connection, and bone defect morphology significantly impacted labial bone resorption, while patient age, sex, timing of placement, and implant site did not. Implants with a buccal bone width ≥2 mm showed significantly less labial horizontal and vertical bone resorption (horizontal P < 0.001, vertical P = 0.001), and healing abutments reduced resorption compared to cover screws (horizontal P = 0.002, vertical P = 0.034). More significant vertical resorption occurred in non-contained bone defects after guided bone regeneration (P = 0.040).

Five- and 18-Year Outcome of Two Cases with Full-Arch Rehabilitations Ad modum All-on-4 in the Presence of Challenging Conditions

Placing implants in fresh postextraction sites is a borderline rehabilitation procedure. The purpose of this report is to describe the pre-, per-, and postoperative procedures for maintaining long-term stability of two full-arch rehabilitations through the All-on-4 protocol, performed in the presence of challenging conditions. Two patients were referred for full-arch rehabilitation with immediate function, with both patients presenting infection in the jaws: patient 1 with an implant (position #45) inserted in a cystic cavity; patient 2 with one implant (position #24) inserted transsinus after the removal of a cyst on the base of the maxillary sinus and another implant (position #15) inserted with a dehiscence. Both patients received a preoperative dental hygiene appointment, a regenerative surgical protocol, and were enrolled in a postoperative maintenance protocol. After surgery a provisional prosthesis was provided ensuring immediate function, and 6 months after surgery, the final prosthesis was delivered. During the follow-up appointments (final follow-up at 5 and 18 years), the implants were stable, and no infection was observed for both patients. The present case report describes two full-arch rehabilitations in immediate function, supported by dental implants inserted in the presence of challenging conditions that do not represent the norm, rather are highly demanding for the clinical team, warranting caution in the interpretation of the results.

Clinical and Radiographic Evaluation of Soft Tissue and Bone Status in Immediate Loaded Implants Placed Following Their Extraction in the Maxillary Anterior Region

INTRODUCTION

In the maxillary anterior region, teeth extraction leads to significant soft and hard tissue changes. Immediate implant placement following extraction aims to reduce bone loss and overall treatment time. However, it may result in adverse soft tissue changes impacting esthetics. This study evaluates the clinical and radiographic outcomes of immediately loaded implants in the maxillary anterior region, focusing on soft tissue preservation and bone status.

MATERIALS AND METHODS

This study, conducted from April 2022 to August 2024 at the Department of Oral and Maxillofacial Surgery, Ragas Dental College and Hospital, included 10 immediately loaded implants in seven patients. Following atraumatic extraction, implants were placed and loaded with functional provisional crowns fabricated using three-dimensional (3D) rapid prototyping models. Parameters such as crestal bone loss, buccal and palatal bone width, and interdental papilla thickness were evaluated preoperatively and postoperatively using radiographs and clinical assessments.

RESULTS

The study found significant crestal bone loss at both mesial and distal sites over time, with the greatest loss observed at the three-month follow-up. Buccal and palatal bone width showed no significant differences preoperatively and postoperatively. Interdental papilla thickness and overall pink esthetic scores also showed no significant differences between preoperative and postoperative evaluations.

CONCLUSION

Immediate implant placement in the maxillary anterior region, using 3D rapid prototyping for custom splint fabrication, demonstrated effective preservation of soft tissue profile and bone architecture. This approach provides functional and esthetic benefits, although careful monitoring of crestal bone loss is necessary.

Immediate implant placement and simultaneous bone grafting with bone cement in extraction sockets: A systematic review

Background

The placement of immediate dental implants intrinsically displays crestal gaps, which may compromise implant osseointegration. Several grafting materials have been used to overcome this issue. Of the available materials, the use of bone cement is relatively new in oral implantology. This study aimed to examine the available literature on the utilization of bone cements in immediate placement of dental implants and assess its potential in oral implantology.

Objectives

To synthesize evidence for appraising the impact of bone cements on implant stability and bone-to-implant contact (BIC) of dental implants placed immediately after extraction in humans and animals after 3 months of healing from tooth extraction.

Methods

A systematic search was conducted in PubMed, Medline, and ScienceDirect for relevant studies published from inception to September 2021 using relevant search terms. Of the 1624 studies, 4 were selected for this systematic review.

Results

Three of the four studies concluded that bone cements enhanced implant stability and/or BIC with better quality and/or quantity of bone surrounding the immediate dental implant. The conclusion drawn by one article remained indecisive. Meta-analysis could not be performed owing to the presence of substantial heterogeneity.

Conclusion

Bone cement is a promising treatment alternative as it augments implant stability and/or BIC in immediate dental implants. Nonetheless, further prospective human clinical trials are required to establish its clinical effectiveness and arrive at a definitive conclusion to recommend its clinical use.

Management of an extensive soft tissue deficiency prior to immediate implant in the aesthetic zone: a 4-year follow-up

Soft tissue deficiency in a tooth extraction site in the aesthetic area is a common and challenging clinical situation. This case report demonstrates the successful treatment of extensive gingival recession and buccal bone dehiscence associated with a hopeless tooth. Initially, a connective tissue graft was used to cover the root and thicken the soft tissue. After 2 months, the tooth was extracted, an implant was immediately placed, and a temporary restoration was installed. After 3 months, the soft tissue exhibited a natural and harmonious architecture. A custom zirconia abutment and crown were then fabricated and placed. At the 4-year follow-up, the peri-implant tissue displayed satisfactory aesthetics, with a well-structured buccal bone plate and healthy peri-implant indicators. This two-stage approach, addressing gingival recession first and proceeding with immediate implant placement after soft tissue healing, proved to be a safe and effective method with stable long-term results.

Clinical and radiographic outcomes of a two-piece ceramic implant: one year results from a prospective clinical trial

OBJECTIVE

To describe the clinical and radiographic performance and survival rate of a new two-piece ceramic implant system after at least 12 months of follow-up.

MATERIALS AND METHODS

Sixty-five implants were placed and followed up for at least 12 months (12.3 ± 1.5), in 50 patients. The implants were installed both in fresh extraction sockets and in healed sites and received provisional restoration when the clinical insertion torque was greater than 35Ncm. The primary results describe the survival rate of these implants. Clinical performance was evaluated through the evaluation of the Pink Esthetic Score (PES) and the degree of satisfaction of the patients. Bone loss was measured through radiographic measurements of the marginal bone loss in the mesial (MBLM) and distal (MBLD) sites.

RESULTS

The survival rate was 98.5%. The average MBLM was 0.24 mm (± 0.53) and the MBLD was 0.27 mm (± 0.57). A statistical difference was observed only when comparing immediate implants with delayed ones (MBLM - p = 0.046 and MBLD - p = 0.028) and when they received immediate provisionalization or not (MBLM - p = 0.009 and MBLD - p = 0.040). The PES before the intervention (T0) was 13.4 (± 0.8) and the PES at T2 (12-month follow-up) was 12.9 (± 1.5) (p = 1.14).

CONCLUSION

The new two-piece ceramic implant used in the present study showed predictable and reliable results, similar to those found with titanium implants after one year of follow-up.

CLINICAL RELEVANCE

These implants can be used as an alternative to titanium implants in terms of the marginal bone loss and the degree of patient satisfaction.

Comparison of Immediate Implantation into the Socket with and without Periapical Pathology: Systematic Review and Meta-Analysis

Background and Objectives: The present systematic review and meta-analysis were conducted to evaluate and compare the long-term clinical outcomes of immediate implants placed into fresh sockets with and without periapical pathology. Materials and Methods: After the search and review of the literature in the electronic databases, 109 publications were achieved. The titles and abstracts of 66 publications were screened. After the evaluation of the full text of 22 publications, based on the inclusion criteria, six controlled clinical studies were included in this systematic review and meta-analysis. Results: The statistical calculation showed no heterogeneity among the studies included. The implant survival was 99.6% in the test (socket with periapical pathology) and control (socket without periapical pathology) groups of all the clinical trials. The results of the meta-analysis showed no statistically significant difference between test and control groups regarding the marginal bone level and the width of keratinized mucosa in all the studies. Other parameters indicating plaque level, bleeding on probing, and gingival recession also did not differ between test and control groups at the final follow-up in nearly all studies. Conclusions: Within the limitation of this systemic review and meta-analysis, the obtained data suggest that implants immediately placed into the extraction sockets of teeth exhibiting periapical pathology can be successfully osseointegrated for an extended period.

Immediate implant placement influenced by musical flow: a prospective randomized controlled clinical trial

BACKGROUND

The purpose of this study was to test how musical flow using baroque (BM) and classical era music (CM) as a non-pharmacological therapy can control anxiety and pain levels among patients undergoing IPI (Immediate post-extraction implants).

METHODS

78 patients who required an IPI were enrolled in this randomized clinical trial. Each patient was assigned to one of the three experimental groups with a simple randomization: Group I (n = 26) listened to BM; Group II (n = 27) listened to CM; and Group III (n = 25) did not listen to music and was the control group (C). The physiological dependent variables analyzed were systolic blood pressure (SBP), diastolic blood pressure (DBP), heart rate (HR) and oxygen saturation (SpO2). The psychological dependent variable analyzed was modified dental anxiety scale (MDAS) and visual analogue scale (VAS), measured before and after surgery. In all cases, the level of statistical significance was set at p < 0.01.

RESULTS

Statistically significant differences were found in the SBP decrease in the CM group (p = 0.001, CI = 1.9716-6.5840) and the BM group (p = 0.003, CI = 1.4450-6.4396). Anxiety levels during the intervention decreased in both groups that listened to music: BM group (p = 0.002, CI = 0.645-2.662) and CM group (p = 0.000, CI = 1.523-3.884).

CONCLUSIONS

Patients undergoing IPI placement surgery can register lower levels of SBP when listening to BM and CM than patients who were not exposed to the musical flow, improving their anxiety levels.

Enhancement of in vitro antibacterial activity and bioactivity of iodine-loaded titanium by micro-scale regulation using mixed-acid treatment

Postoperative infection and subsequent device loss are serious complications in the use of titanium dental implants and plates for jawbone reconstruction. We have previously reported that NaOH-CaCl2 -thermal-ICl3 -treated titanium (NaCaThIo) has a nano-scale surface and exhibits antibacterial activity against Staphylococcus aureus. The present study examined the surface properties of mixed-acid treated and then iodine-treated titanium (MA-NaCaThIo), and evaluated oral antibacterial activity and cytotoxicity compared with the results obtained with NaCaThIo. MA-NaCaThIo formed a surface layer with a nano-scale network structure having microscale irregularities, and both the thickness of the surface layer (1.49 ± 0.16 μm) and the average surface roughness (0.35 ± 0.03 μm) were significantly higher than those of NaCaThIo. Furthermore, MA-NaCaThIo maintained high hydrophilicity with a contact angle of 7.5 ± 1.7° even after 4 weeks, as well as improved apatite formation, iodine ion release, and antibacterial activity against Prevotella intermedia compared to NaCaThIo. Cell culture test revealed that MA-NaCaThIo exhibited no cytotoxicity against MG-63 and Vero cells, while increased cell proliferation, ALP activity and mineralization of MG-63 compared to NaCaThIo. This treated titanium is expected to be useful for the development of next-generation titanium devices having both bone-bonding and antibacterial properties.

Clinical outcomes of 3-5 years follow-up of immediate implant placement in posterior teeth: a prospective study

BACKGROUND

Immediate implant placement in posterior teeth has become popular in recent years. However, only a few studies focused on evaluating the long-term success of immediate implant placement.

PURPOSE

To analyze the clinical outcomes of immediate implant placement in the posterior region with conventional loading with 3-5 years follow-up following the International Congress of Oral Implantologists (ICOI) Pisa Consensus Conference.

METHOD

The study was done in 25 bone-level implants (Straumann® SLActive® bone level tapered implant, Straumann®, Basel, Switzerland) in 19 patients who underwent immediate implant placement in a posterior tooth with conventional loading with 3-5 years follow-up. The overall success and survival of these placements were evaluated following the International Congress of Oral Implantologists (ICOI) Pisa Consensus Conference using chart records, clinical examination, radiographic evaluation, and outcomes measurement. Patient satisfaction was evaluated by using a numeric rating scale. The biological and technical status, modified Pink Esthetic Score (mPES), complications, and marginal bone change were also evaluated. The analysis was done using SPSS version 21 (SPSS Inc., Chicago, IL, USA). The data were analyzed using a paired samples t-test.

RESULTS

It was found that 24 out of the 25 (96%) dental implants survived for an average of 57 ± 8.07 months. All of the 24 surviving dental implants were considered an operational success. The average mPES was 9.75 ± 0.44. The major prosthetic complications seen were: (1) proximal contact loss (41.67%), (2) loosening of the screw (8.33%), and (3) cement debonding (4.17%).

CONCLUSIONS

Immediate implant placement in a posterior tooth with conventional loading yields a predictable result with some complications. The most prominent complications were proximal contact loss, followed by loosening of the screw and cement debonding. The implant survival rate was 96% at a mean time follow-up of 4 years and 9 months.

Innovative Alveolar Ridge Preservation Surgical Technique with Immediate Dental Implant Placement: A Retrospective Case Report of 1-Year Follow-Up

Following tooth extraction, the alveolar ridge undergoes morphological and dimensional changes, including a clot formation that is gradually replaced by granulation tissue. Studies indicate that both horizontal and vertical ridge dimensions decrease after extraction; however, these changes can be mitigated through grafting with biomaterials and barrier membranes. Alveolar ridge preservation (ARP) techniques are employed to counteract bone resorption postextraction, encompassing periosteal inhibition and modified periosteal inhibition (MPI) techniques. The Degidi clot chamber technique offers a means to achieve biomaterial-free extraction sockets, promoting healing and osteointegration. This study aims to present the first rehabilitation of a postextraction dental implant in the maxilla using an innovative ARP procedure via a MPI technique. The technique does not involve autologous or heterologous grafting materials; instead, a cortical lamina and a customized screw are used in conjunction with the blood clot. The primary objective is to protect the vestibular cortical bone from preosteoclastic aggression, which can trigger bone resorption. The technique employs a 0.5-mm cortical lamina to mechanically shield the vestibular cortical bone, preventing vestibular cortical bone resorption and increasing its thickness without the need for biomaterial insertion, relying on the blood clot. The effectiveness of the technique was assessed through a 12-month postimplantation cone-beam computed tomography scan, revealing a 0.5-mm increase. Although based on a single case, the 1-year follow-up results are promising, and further studies are warranted to validate the technique's efficacy.

Comparing the Long-term Success Rates of Immediate Implant Placement vs. Delayed Implant Placement in Patients with Periodontally Compromised Teeth

Background

This study aims to compare the long-term success rates of immediate implant placement and delayed implant placement in patients with periodontally compromised teeth.

Materials and Methods

A total of 30 patients presenting with periodontally compromised teeth requiring extraction and subsequent implant placement were enrolled in this retrospective study. Patients were divided into two groups based on the timing of implant placement: Group A (immediate implant placement) and Group B (delayed implant placement). Implants were placed according to standard protocols. Patient records were reviewed for implant survival, peri-implant bone loss, and prosthetic complications. Data were statistically analyzed using appropriate tests.

Results

The mean follow-up period was 5 years. In Group A, the implant survival rate was 90%, while in Group B, it was 83%. The mean peri-implant bone loss was 1.5 mm in Group A and 2.2 mm in Group B. Prosthetic complications were observed in three cases in Group A and five cases in Group B. The differences in implant survival and bone loss between the two groups were not statistically significant (P > 0.05).

Conclusion

Both immediate implant placement and delayed implant placement demonstrated comparable long-term success rates in patients with periodontally compromised teeth.

Three-dimensional radiographic assessment of immediate implant placement in the posterior mandible: A novel parameter-based classification

OBJECTIVES

To assess the implant position (IP), the interradicular septum width (ISW) and radiographic bone to implant contact (BIC), when simulating an immediate implant placement in first and second mandibular molars.

STUDY DESIGN

75 patients (150 sites) were studied using cone beam computed tomography scans (CBCT) and computer aided design software. Implants were placed in a prosthetically driven position; subsequently, IP and BIC were digitally calculated. Linear ISW was also analyzed at 2, 4 and 6mm apically to the highest septal bony peak. Multiple linear regressions were performed to assess relationships between BIC and the different predictive variables. Additionally, the receiver operating characteristics (ROC) curve was used to create a model for BIC based on the ISW at 2mm.

RESULTS

BIC in implants replacing first molars was the highest at the septal (S) position when compared to those in septal-mesial (S-M) position (p-value 0.001). As for the second molar, the highest percentage of BIC was recorded at the septal (S) position, followed by those in S-M and mesial (M) positions (p<0.001).

CONCLUSION

According to the proposed classification, clinician must consider the ISW and IP when placing immediate implant in the first and second mandibular molar sites. When tackling first molars, S position is predominant, while S-M position is the most common in the second molars. ISW at 2mm should be at least respectively 2mm and 2.5mm at the first and second molar sites to achieve 50% of BIC.

Immediate implant placement in single mandibular molar with chronic periapical periodontitis

INTRODUCTION

The present study aims to assess and compare the clinical outcomes of immediate implant placement in the mandibular molar region with or without the presence of chronic periapical periodontitis.

MATERIALS AND METHODS

Employing a case-control design, this study encompassed a cohort of patients necessitating implant surgery to supplant a single, failed mandibular molar. Participants exhibiting periapical lesions measuring between > 4 mm and < 8 mm were assigned to the test group, while those without periapical lesions to the control group. Subsequent to flap surgery and tooth extraction, extraction sockets were debrided thoroughly, and implants were immediately implanted (baseline). Permanent restorative procedures were carried out three months post-operation, with follow-up conducted one year post-surgery. During the study period, parameters including implant survival rate, Cone Beam Computer Tomography (CBCT) data, implant stability quotient (ISQ), insertional torque values (ITV), and potential complications were closely monitored.

RESULTS

Throughout the yearlong observation period subsequent to implant placement, both groups exhibited a 100% implant survival rate. None of the participants experienced any complications. Both groups demonstrated significant decreases in the height and width of the alveolar bone (P < 0.05). However, there were no statistically discernible differences between corresponding areas in the two groups (P > 0.05). The differences in ITV between the test group (37.94 ± 2.12 N•cm) and the control group (38.55 ± 2.71 N•cm) were not statistically significant at baseline (P > 0.05). A significant rise in ISQ was noted within the same group between baseline and three months post-operation (P < 0.05), while no significant variations in ISQ changes were noted between the two groups (P > 0.05).

CONCLUSION

Given the constraints of this investigation, the preliminary clinical outcomes of immediate implant placement in the mandibular molar region with chronic periapical periodontitis do not significantly differ from those observed in instances devoid of chronic periapical periodontitis.

Pre- and Postoperative Evaluation of Immediate and Early Implant Placement in Esthetic Areas with Pre-Extraction Facial Dehiscence: A Retrospective Clinical Study

The clinical requirement for a good esthetic result for immediate implant placement is the absence of dehiscence in the anterior facial alveolar bone. In the presence of dehiscence, it is recommended to use a connective tissue graft in addition to immediate implant placement or to change to early implant placement. However, the literature focusing on dehiscence is scarce, and the influence of different placement times and combined use of connective tissue graft on postoperative esthetics in cases with dehiscence is unclear. Therefore, we quantitatively evaluated the pre-extraction dehiscence morphology and postoperative changes in the facial tissue of implants in three groups: immediate implant placement (Group I), immediate implant placement with connective tissue graft (Group IC), and early implant placement (Group E). To this end, 52 implants were obtained (20 in Group I, 16 in Group IC, and 16 in Group E). A wider dehiscence increases the risk of soft tissue regression, which was one reason for choosing early implant placement. A combination of immediate implant placement and connective tissue graft, or early implant placement, tended to result in less soft tissue regression due to the thicker postoperative facial soft tissue volume.

Critical review on bone grafting during immediate implant placement

In the last 20 years, immediate implant placement has been proposed as a predictable protocol to replace failing teeth. The research conducted in preclinical and clinical studies have focused on soft and hard tissue changes following tooth extraction and immediate implant placement. Different approaches for hard and soft tissue grafting together with provisional restorations have been proposed to compensate tissue alterations. This review analyzed some relevant clinical and preclinical literature focusing on the impact of bone grafting procedures on immediate implant placement in terms of hard and soft tissue changes, aesthetic results, and patient-related outcomes.

Three-Dimensional Peri-Implant Tissue Changes in Immediately vs. Early Placed Tapered Implants Restored with Two Different Ceramic Materials-1 Year Results

BACKGROUND

A prospective multi-center randomized controlled clinical trial was performed to digitally analyze tissue volume changes in immediately and early placed implants with simultaneous bone augmentation restored with two different all-ceramic materials.

METHODS

A total of 60 patients received 60 bone-level tapered implants (BLT, Straumann AG) immediately (n = 30) or early placed, 8-10 weeks after tooth extraction, (n = 30). Implants were restored with all-ceramic single crowns fabricated out of zirconia (Lava Plus, 3M), or lithium disilicate (E.max CAD, Ivoclar Vivadent AG) bonded to titanium base abutments (Variobase for Cerec, Straumann AG). Impressions were taken at baseline (BL), 6 and 12 months, and STL data were used to define an area of interest (AOI) to analyze peri-implant volume changes and midfacial recessions.

RESULTS

For immediate placement, a mean volume loss of -5.56 mm3 (±5.83 mm3) was found at 6 months, and of -6.62 mm3 (±6.56 mm3) at 12 months. For early placement, a mean volume loss of -1.99 mm3 (±5.82 mm3) at 6 months, and of -3.7 mm3 (±5.62 mm3) at 12 months was found. The differences in volume loss at 12 months between the two implant placement protocols were significant (p = 0.005). In both groups, mean midfacial recessions of 0.48 mm (±0.52) occurred.

CONCLUSIONS

A more pronounced peri-implant volume loss can be expected 12 months after immediate implant placement compared with early placement.

Clinical efficacy of soft-tissue augmentation on tissue preservation at immediate implant sites: A randomized controlled trial

AIM

This randomized controlled trial aimed to investigate the efficacy of soft-tissue augmentation (STA) with a subepithelial connective tissue graft (SCTG) or an acellular dermal matrix (ADM) on reducing tissue alterations at an immediate implant site.

MATERIALS AND METHODS

This trial had three groups: (i) immediate implant with SCTG (ICT group); (ii) immediate implant with ADM (IAD group); (iii) immediate implant without STA (control group). Forty-six patients were randomly assigned to each group. Implants were placed at the maxillary anterior or premolar areas and restored after the 6-month visit. Clinical outcomes, including buccal soft-tissue contour, peri-implant mucosal level, soft-tissue thickness and keratinized tissue width, were measured at baseline and at 3-, 6- and 12-month follow-up visits. Radiographic bone levels were measured at baseline and at 6- and 12-month follow-up visits. Patient-reported outcomes were also collected.

RESULTS

STA procedures increased peri-implant mucosal thickness and maintained buccal soft-tissue contours. Compared to the control group, STA groups did not prevent peri-implant mucosal recession or interproximal bone resorption. Generally, no significant differences in clinical outcomes were detected between the ICT and IAD groups. Most patients were highly satisfied with the immediate implant procedure and outcomes without significant differences between groups.

CONCLUSIONS

STA at immediate implant sites enhanced soft-tissue thickness and maintained soft-tissue contours but did not prevent peri-implant mucosal recession or interproximal bone resorption. Long-term follow-up should be performed since these results were reported for only up to 1 year.

Soft tissue dimensional change using customized titanium healing abutment in immediate implant placement in posterior teeth

BACKGROUND

The morphologic and dimensional alveolar bone is significant for resorption in the first 3 months after tooth removal because they restrict treatment outcomes with respect to function and esthetic. Following teeth extraction, the width and height of the alveolar ridge contour are reduced in both the horizontal and vertical dimensions. Following implant placement, the gingival morphology should be changed minimally compared to pre-extraction. Surrounding natural-like tissue is also an ultimate goal of the dental implant treatment, which is correlated with the cervical third contour on the anatomical tooth, for comfortable cleansing, food impaction avoidance, and esthetics.

PURPOSE

To evaluate the peri-implant soft tissue changes after immediate implant placement (IIP) with the use of a customized titanium healing abutment in the posterior teeth.

METHOD

Digital impressions using the intraoral scanner (MEDIT i500) were taken from 30 patients. Customized titanium healing abutments were designed and milled before extraction. Flapless extractions were done using surgical guides, 32 immediate implants placement were done in posterior areas, and healing abutments were placed. Soft tissues were scanned during pre-operation, and post-surgery during the 1st, 3rd, and 6th months. A 3D analysis program (Final Surface) evaluated the gingival margin distance, height, contour width, and volume in each period. SPSS was used to analyze the data with a p-value = 0.05. The between-time interval comparisons were done and the analysis was done using a Multivariate test.

RESULTS

Customized titanium healing abutments used in immediate implantation maintained optimal peri-implant mucosa. In intermittent periods, there was no significant reduction in all aspects of the margin distances and heights. During the entire period, the margin height reduction on the buccal, lingual, mesial, and distal was 0.63 mm, 0.93 mm, 0.08 mm, and 0.24 mm, respectively, and contour width reduction on the buccal, lingual, and buccolingual was 0.59 mm, 0.43 mm, and 1.03 mm, respectively. There was a significant reduction in the total buccolingual contour width in the 1st month and total volume in the 3rd to 6th months.

CONCLUSIONS

Immediate implant placement with customized titanium healing abutment can achieve the optimal peri-implant mucosa and this protocol is an alternative for soft tissue management.

Buccal bone thickness and mid-facial soft tissue recession after various surgical approaches for immediate implant placement: A systematic review and network meta-analysis of controlled trials

AIM

To evaluate the relative efficacy and confidence in the precision of the results of different surgical interventions for immediate implant placement in the anterior area.

MATERIALS AND METHODS

Electronic searches were performed in PubMed, Embase, and Cochrane CENTRAL. Randomized controlled trials comparing different surgical techniques in anterior jaws for type 1 implant placement were included. Outcome measures included implant survival (primary outcome), buccal bone thickness (BBT) reduction, and mid-facial soft tissue recession (MSTR). Risks of bias assessment, network meta-analysis (NMA), sensitivity analysis, and quality-of-evidence assessment were performed.

RESULTS

Twenty-two studies reporting on 948 subjects and 5 surgical interventions were included. Fourteen early failures were reported. Compared with open-flap surgery without tissue augmentation (F-N) and looking at BBT preservation, NMA showed that there was moderate confidence that flapless surgery with hard tissue augmentation (FL-HTA) was better than flapless surgery without tissue augmentation (FL-N) or open-flap surgery with hard tissue augmentation (F-HTA) (mean difference -0.8 mm, 95% confidence interval: -1.1 to -0.5 mm; -0.6 mm, -0.9 to -0.4 mm; and -0.5 mm, -0.7 to -0.3 mm, respectively). There was moderate confidence that flapless surgery with hard and soft tissue augmentation (FL-HTA&STA) could significantly prevent MSTR compared with FL-HTA (-0.5 mm, -0.7 to -0.3 mm) and FL-N (-0.6 mm, -1.2 to -0.04 mm). However, there was no significant additional benefit in BBT with the FL-HTA&STA approach compared to the FL-HTA approach (-0.30 mm, -0.81 to 0.21 mm).

CONCLUSIONS

For immediate implant placement in the anterior areas, the FL-HTA approach better preserves BBT (moderate confidence); adding STA improves the stability of the mid-facial soft tissue level (moderate confidence) but at the expense of BBT (low confidence).

Classification of premolars sagittal root position and angulation for immediate implant placement: a cone beam computed tomography study

OBJECTIVES

Sagittal root position (SRP) and buccal plate thickness are important considerations in implant treatment planning. The objective of this study was to classify the relationship of the SRP and angulation to the osseous housing to assist treatment plan making for immediate implant placement in the premolar region.

STUDY DESIGN

We classified the SRP and angulations of the maxillary and mandibular premolars and measured the buccal plate thickness of 150 patients using cone beam computed tomography to support clinical decision making.

RESULTS

Regarding SRP types, 41.67%, 51.83%, 3.67%, and 2.83% of maxillary premolars and 84.33%, 15%, 0%, and 0.67% of mandibular premolars were classified as types B, M, L, and N, respectively. In terms of angulation, 20.83%, 46%, 32.17%, and 1% of maxillary premolars and 2%, 5.33%, 36.67%, and 56% of mandibular premolars were grouped into classes 1, 2, 3, and 4, respectively. The buccal bone thickness at most locations in premolar regions was <1 mm.

CONCLUSIONS

The classification of SRP and angulation will assist in treatment plan making for immediate implant placement in the premolar region.

Influence of using collagen on the soft and hard tissue outcomes of immediate dental implant placement: A systematic review and meta-analysis

OBJECTIVE

To compare the effects of bone grafting materials, collagen-infused grafting materials, and no grafting materials on the soft and hard tissue outcomes when an immediate implant is placed.

MATERIALS AND METHODS

In addition to hand searching, electronic searches were performed in Pubmed, Embase, and the Cochrane Central Register of Controlled Trials (CENTRAL). Only RCTs were included in our review. The Cochrane ROB 2.0 tool was used to assess the risk of bias (ROB). Two subgroups were used to evaluate implant failure rate, buccal bone resorption, soft tissue thickness, and esthetic scores. In the meta-analysis, both the fixed-effects model and the random-effects model were employed.

RESULT

7 RCTs were selected after screening 580 studies, and 205 patients were included in the review, with 279 implants. Two RCTs were at low bias of risk, three were at moderate bias, and two were deemed at high risk of bias. The failure rate (95% CI: 0.17 to 11.84) and soft tissue thickness were not significantly different between collagen with bone grafting materials and without bone grafting materials. On the basis of the failure rate and buccal bone thickness, there was no significant difference between collagen with bone grafting materials and bone grafting materials. While we found collagen with bone grafting materials could have a significant advantage on the buccal bone thickness (MD: -0.43,95% CI -0.72 to -0.41) and esthetic outcome (MD: -1.23,95% CI -1.90 to -0.55).

CONCLUSION

In the statement of immediate implant implantation, the thickness of the buccal bone and esthetic outcomes did significantly benefit from bone grafting materials with collagen inserted in the "jumping gap".

Effect of cutting flute design features on primary stability of immediate implant placement and restoration: a dynamic experimental analysis

Self-tapping implants with self-cutting flutes may influence primary stability, especially for the immediate implant placement and restoration protocol in which implants are affixed to the bone in the apical portion. Screw geometry differs between brands, and the effect of apical design on its clinical outcomes remains unclear. This study is aimed at investigating the influence of cutting flute shape (spiral, straight, and without flute) on primary stability by using a dynamic experimental test. Six types of dental implants were designed using computer-aided design and computer-aided manufacturing technology, consisting of three types of cutting flute shapes along with two types of screw features. A dynamic mechanical test was performed using a cyclic loading scheme. The mechanical behaviors of resistance to lateral load (RLL), maximum force, and energy dissipation were compared between groups. In the dynamic test, implants without cutting flute also exhibited higher values in RLL, maximum force, and energy dissipation. The aggressive thread implant with straight flute displayed higher RLL and had a significantly higher values in RLL (p = 0.033) at the threshold point of bone-implant interface breakdown. The implants without cutting flutes exhibited higher primary stability. Straight flute design would improve RLL for aggressive thread implant.

Clinical effects of conventional and underprepared drilling preparation of the implant site based on bone density: A systematic review and meta-regression

PURPOSE

There is no clinical consensus to determine the right balance between underpreparation and marginal bone level changes. The purpose of this systematic review and meta-regression was to investigate the influence of the type of drilling preparation of the implant site in relation to the bone mineral density on the clinical success, expressed in terms of the MBL and implant failure rate.

STUDY SELECTION

A thorough search was performed using the digital databases MEDLINE PubMed, EMBASE, and Cochrane Central Register of Controlled Trials by entering research lines or various combinations of free words. The main keywords used were "dental implants", "bone density", and "torque".

RESULTS

The mean bone resorption in the conventional preparation group was -0.43 (± 0.28) mm, whereas it was -0.80 (± 0.37) mm in the underprepared group. For the D1/D2/D3 bone group, the slope was significantly different from zero and linearity; the D4 bone group slope was not significantly different from zero and was almost parallel, although it was significantly different from linearity. The box and whiskers plot shows that the MBL in underprepared sites tended to be significantly higher with a higher variation than that in conventionally prepared sites.

CONCLUSIONS

Within its limits, our meta-regression analysis showed that MBL is influenced by the type of drilling preparation and bone mineral density. In particular, a lower MBL was observed in the D1 bone with conventional preparation than with underpreparation. Moreover, a greater implant-to-osteotomy site mismatch was positively associated with greater MBLs in the bone densities of D1/D2/D3.

Bone substitutes vs. autogenous bone graft for regeneration of the anterior maxillary alveolar process with horizontal bone resorption: systematic review

The objective of this systematic review was to identify the available scientific evidence on bone substitutes (BS) compared to autogenous bone grafts (ABG) for regeneration of horizontal bone resorption in the anterior maxillary alveolar process, aiming at rehabilitation with endosseous implants. This review was performed according to the PRISMA guidelines (2020) and registered in the database PROSPERO (CRD: 42017070574) . The databases searched were PUBMED/MEDLINE, EMBASE, SCOPUS, SCIENCE DIRECT, WEB OF SCIENCE, and CENTRAL COCHRANE, in the English language. The Australian National Health and Medical Research Council (NHMRC) and Cochrane Risk of Bias Tool were used to assess the study's quality and risk of bias. 544 papers were found. After the selection process, six studies were selected for review. A total of 182 patients were followed for a period of 6 to 48 months. The mean age of patients was 46.46 years, 152 implants were installed in the anterior region. Two studies achieved a reduced graft and implant failure rate, while the remaining four studies had no losses. It may be concluded that both the use of ABG and some BS are viable alternatives for the rehabilitation with implants in individuals with anterior horizontal bone loss. However, additional RCTs are warranted due to the limited number of papers.

Gingival landmarks and cutting points for gingival phenotype determination: A clinical and tomographic cross-sectional study

BACKGROUND

This cross-sectional study assessed the role of gingival landmarks (GLs) and cutting points (CPs) for gingival phenotype (GP) determination.

METHODS

Six maxillary anterior teeth (70 subjects) were evaluated using soft tissue cone-beam computed tomography (ST-CBCT). Gingival thickness was measured at different GLs: 1) tissue zone (gingival margin [GM], 1 and 2 mm apical to GM, cemento-enamel junction, above the bone crest); 2) bone zone (buccal bone crest [BBC], 1, 2, and 3 mm apical to BBC). CPs of 0.6, 0.8, 1.0, 1.2, and 1.5 mm were used to discriminate between thin and thick GP. The clinical determination of GP was made based on transparency of the periodontal probe (TRAN).

RESULTS

The prevalence of thin and thick GP depended on the GL and CP. Considering the CP (1 mm), thin GP at the tissue zone ranged from 99% at the GM to 10.2% above the bone crest. In the bone zone, thick GP ranged from 28% at the BBC to 6% at 3 mm apical to the BBC. The predictability of a correct assessment of GP by TRAN compared with ST-CBCT was influenced by the GLs and CPs. A slight agreement (kappa <0.2) and low accuracy (area under the curve <0.7) were found between methods.

CONCLUSIONS

The determination of thin and thick GPs is related to the gingival landmarks and CPs. Further studies are required for a well-defined treatment protocol considering different gingival landmarks in tissue and bone zones. An ST-CBCT may be useful for this purpose.

Effect on implant drills and postoperative reactions for pre-extraction interradicular implant bed preparation during the COVID-19 pandemic and beyond

The aim of the present study was to observe the abrasion of implant drills and postoperative reactions for the preparation of the interradicular immediate implant bed during the COVID-19 pandemic and beyond. Thirty-two implant drills were included in four groups: blank, improved surgery, traditional surgery, and control. In the improved surgery group, a dental handpiece with a surgical bur was used to decoronate the first molar and create a hole in the middle of the retained root complex, followed by the pilot drilling protocol through the hole. The remaining root complex was separated using a surgical bur and then extracted. Subsequently, the implant bed was prepared. Implant drills were used in the traditional surgery group to complete the decoronation, hole creation, and implant-drilling processes. The tooth remained intact until the implant bed was prepared. The surface roughness of the pilot drill was observed and measured. Surgery time, postoperative reactions (swelling, pain, and trismus), and fear of coronavirus disease 2019 scale (FCV-19S) were measured and recorded, respectively. Statistical analysis revealed significant difference with surface roughness among blank group (0.41 ± 0.05 μm), improved surgery group (0.37 ± 0.06 μm), traditional surgery group (0.16 ± 0.06 μm), and control group (0.26 ± 0.04 μm) (P < .001). Significant differences were revealed with surgery time between improved surgery group (5.63 ± 1.77 min) and traditional surgery group (33.63 ± 2.13 min) (P < .001). Swelling, pain, and trismus (improved group: r ≥ 0.864, P ≤ .006; traditional group: r ≥ 0.741, P ≤ .035) were positively correlated with the FCV-19S. This study proved that a new pilot drill could only be used once in traditional surgery but could be used regularly in improved surgery. Improved surgery was more effective, efficient, and economical than the traditional surgery. The higher FCV-19S, the more severe swelling, pain, and trismus.

Patient-reported outcomes in patients with severe maxillary bone atrophy restored with zygomatic implant-supported complete dental prostheses: a systematic review

Introduction and Objective: Zygomatic implants (ZI) offer a good and predictable alternative to reconstructive procedures of atrophic maxillae. The main objetive of this systematic review was to assess the effect of rehabilitation with zygomatic implants on patient's quality of life (QLP) using Patient Reported Outcomes Measures (PROMs).Materials and Methods: This review followed PRISMA guidelines. An automated electronic search was conducted in four databases supplemented by a manual search for relevant articles published until the end of January 2021. The Cochrane Collaboration Risk of Bias tool and the Newcastle-Ottawa Quality Assessment Scale were used to assess the quality of evidence in the studies reviewed.Results: General findings of this systematic review showed substantial increases in Oral health-related quality of life (OHRQoL) among patients restored with ZI and high scores in terms of general satisfaction, especially in chewing ability and esthetics. An overall survival rate of ZI was 98.3% after a mean follow-up time of 46.5 months was observed. Occurrence of 13.1% biological complications and 1.8% technical complications were reported.Conclusions: Patients rehabilitated with zygomatic implant-supported complete dental prostheses showed substantial improvements in OHRQoL and general satisfaction with the treatment received.

Soft and hard tissue changes after immediate implant placement with or without a sub-epithelial connective tissue graft: results from a 6-months pilot randomized controlled clinical trial

AIM

The present pilot RCT aimed to investigate the influence of a connective tissue graft (CTG) in combination with the immediate implant placement (IIP) on hard and soft tissues healing, without a bone replacement graft in the gap between the implant and the socket walls.

MATERIAL AND METHODS

Thirty patients requiring extraction of one anterior tooth (from premolar to premolar) were randomly assigned to one of the two treatment groups (test: IIP+CTG; control: IIP). Cone-beam computed tomography (CBCT) and optically scans were performed before tooth extraction and at 6-months follow-up. Then, DICOM files were superimposed in order to allow the evaluation of osseous ridge and buccal bone changes, while the superimposition of DICOM and STL (Standard Tessellation Language) files allowed for evaluating of soft tissue contour. For testing the differences between the two groups, the non-parametric test as Wilcoxon rank-sum test, was used.

RESULTS

Twenty-six out of the thirty enrolled patients, attended the 6-month follow-up visit. The 4 patients of control group that were lost to follow-up, were analyzed under the intention-to-treat principle. No statistically significant differences between the groups were observed for the vertical buccal bone resorption (p=0.90), as well as for the horizontal buccal bone resorption at all measured levels. Significant differences were found between test and control groups in the horizontal dimensional changes of osseous ridge at the most coronal aspect (p=0.0003 and p=0.02). Changes of tissue contour ranged between -0.32 and -0.04 mm in the test group, and between -1.94 and -1.08 mm in the control group, while changes of soft tissue thickness varied between 1.33 and 2.42 mm in the test group, and between -0.16 and 0.88 mm in the control group, with statistically significant differences for both variables at all measured levels. At 6 months, the mean volume increase was 6.76±8.94 mm³ and 0.16±0.42 mm³ in the test and control groups, respectively, with statistically significant difference.

CONCLUSIONS

The findings of the present study indicate that the adjunct of a connective tissue graft at the time of immediate implant placement, without bone grafting, does not influence vertical bone resorption. Within the limits of the present study, it can be suggested that the adjunct of a connective tissue graft at the time of immediate implant placement, without bone grafting, reduces the horizontal changes of the alveolar ridge. Moreover, it allows maintenance of the tissue contour due to an increase in soft tissue thickness.

Consensus Report on Preventive Antibiotic Therapy in Dental Implant Procedures: Summary of Recommendations from the Spanish Society of Implants

Current patterns of preventive antibiotic prescribing are encouraging the spread of antimicrobial resistance. Recently, the Spanish Society of Implants (SEI) developed the first clinical practice guidelines published to date, providing clear guidelines on how to prescribe responsible and informed preventive antibiotic therapy (PAT) based on the available scientific evidence on dental implant treatments (DIs). The present document aims to summarise and disseminate the recommendations established by this expert panel. These were based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Studies were analysed using the Scottish Intercollegiate Guidelines Network (SIGN) checklist templates and ranked according to their level of evidence. They were then assigned a level of recommendation using the Grading of Recommendations, Assessment, Development and Evaluation system (GRADE). Guidelines were established on the type of PAT, antibiotic and dosage of administration in the placement of DIs without anatomical constraints, in bone augmentation with the placement of DIs in one or two stages, placement of immediate DIs, sinus elevations, implant prosthetic phase, as well as recommendations in patients allergic to penicillin. Therefore, the PAT must be adapted to the type of implant procedure to be performed.

Root Membrane Replantation as an Alternative Technique for the Socket Preservation

Background and Overview. Socket shield is a technique that allows the maintenance of tissue volumes. In the reported clinical case, the replantation of the buccal root fragment mistakenly extracted during a socket shield surgery is performed. We present a follow-up to 5 years with an unexpected healing.Case Description. An 88-year-old patient underwent an immediate loading implant placement associated with the replantation of the mistakenly extracted root fragment. The shaping of the fragment was performed extraorally, and the replantation was done so that the fragment protruded above the crest margin.Conclusions and Practical Implications. The 5-year follow-up shows an uneventful healing of the implant. At 48 months, postoperative CBCT exam reports images compatible with the regeneration of the bone over the portion of root that protruded over the margin. The outcome suggests clinical implications, as the opportunity to easily shape the fragment extraorally and replant sound portion of the root (not necessary the buccal) in buccal socket with bone defect.

[Rehabilitation of a case with active periodontitis and advanced perii-implantitis. Minimally invasive approach]

Periodontal disease (PD) is an oral pathology with a high prevalence worldwide. There are different treatments for periodontal disease, with the trend in recent years being towards minimally invasive treatments. In cases where implants cannot be treated predictably in the long term, we should also consider removing the implant using atraumatic methods and retreatment of the case. A point to be taken into account both for the insertion of a dental implant and for its maintenance after periimplantitis or for its replacement is the periodontal status of the patient. Periodontal disease can affect the prognosis of our treatment in this type of situation. In the following clinical case, we show the treatment of a patient affected by PD and periimplantitis with a minimally invasive approach.

Artificial biofilm removal in a peri-implant mucositis model: Efficacy of air polishing technology as adjunct to ultrasonic debridement alone and impact of the site and the depth of mucosal tunnel-An in vitro study

AIM

The current in vitro model aims to evaluate the adjunctive effect on artificial biofilm removal determined by the use of a glycine-powder air-polishing procedure (GPAP) over the ultrasonic debridement (USD) alone when the removal of artificial biofilm on abutment surface is performed. The procedures were carried out also evaluating the impact of the site (mesial, distal, vestibular, and oral) and three different mucosal tunnel depths (2 mm, 4 mm, and 6 mm).

MATERIALS AND METHODS

Single tooth implant replacement was simulated. Three different abutment heights together with a prosthetic contour were investigated (2 mm, 4 mm, and 6 mm); custom-made gingival masks were created to mimic peri-implant soft tissue. Biofilm was simulated with an indelible ink. The protocol consisted in two intervention stages for each abutment: (a) USD with PEEK tip plus (b) GPAP. At the end of each intervention, abutments were unscrewed, and standardized photographs were taken. Statistical analysis was carried out to compare residual stain percentage between the two intervention stages and among different sites and mucosal tunnels.

RESULTS

A total of 30 abutments were instrumented. A significant reduction of the percentage of residual staining (PRS) after the combination of GPAP + USD over USD alone was demonstrated (16% vs. 32%; p < 0.05). Moreover, the better performance of the GPAP + USD protocol was observed regardless of the different mucosal tunnel heights and the sites analyzed. Intragroup analysis unveils that the smaller PRS was observed for shallow mucosal tunnels (2 mm) and vestibular sites for both protocols.

CONCLUSION

GPAP + USD provided adjunctive effect on artificial biofilm removal in comparison to the USD alone. Furthermore, proximal surfaces and deeper mucosal tunnels (4 and 6 mm) showed a reduced instrumentation efficacy for both protocols.

Immediate implant placement vs. early implant treatment in the esthetic area. A 1-year randomized clinical trial

OBJECTIVES

To assess the impact of implant placement and temporization timing on esthetic outcomes of single maxillary anterior implants with intact bone walls and interproximal bone.

MATERIALS AND METHODS

Test group patients received an immediate implant with immediate provisional restoration and socket preservation, while patients in the control group received an early implant placement with guided bone regeneration and delayed loading. Patients were followed for 1 year after final prosthetic and pink esthetic score (PES), mid-buccal mucosal level (MBML), crestal bone changes (CBC), and peri-implant soft tissue parameters, and patient chair time was recorded.

RESULTS

Fifty patients received the intended treatment (25 test and 25 control). No implants failed. PES after 1 year was 12.8 ± 1.19 for the test group and 12.5 ± 1.36 for the control group (p = .362). MBML difference between baseline (after final crown delivery) and the 1-year follow-up was gain of 0.2 ± 1.02 mm for the test group (p = .047) and no change in the control group. CBC after 1 year were 0.1 mm ± 0.21 mm (mesial) and 0.2 mm ± 0.22 mm (distal) for the test group and 0.2 mm ± 0.25 mm (mesial) and 0.3 mm ± 0.19 mm (distal) for the control group, p = .540 (mesial) and p = .462 (distal). Test group required half the chair time (127 ± 13 min) when compared to the control group (259 ± 15 min, p < .001).

CONCLUSIONS

Within the limits of this trial, both treatment protocols resulted in excellent esthetic outcomes with PES >12 after 1-year follow-up.

A novel approach to assess volumetric bone loss at immediate implant sites and comparison to linear measurements: a pilot study and measurement workflow

OBJECTIVES

Studies have evaluated changes in hard tissue following immediate implant placement (IIP) through cone beam computed tomography (CBCT) imaging, typically examining the amount of two-dimensional (2D) linear, rather than three-dimensional (3D) volumetric bone loss. This study compared the 3D volumetric changes of the alveolar bone at immediate implant sites with 2D linear measurement outcomes by using a novel image analysis workflow.

METHODS

Preoperative and 6-month postoperative CBCT images of patients who underwent IIP and bone grafting in the maxillary esthetic area were acquired. Linear and volumetric measurements of buccal bone dimensions were taken using a specially designed workflow. The 2D and 3D measurements were compared, and their correlations were determined.

RESULTS

Images from 13 patients (13 implants) were analyzed. Linear measurements revealed that the general linear buccal bone loss was less than 1mm in all segments. The 3D volumetric bone reduction (reported as median [first quantile, third quantile]) in the vertical, cervical, middle, and apical segments was 14.27 [11.33, 30.66] mm³ (51.30 [42.78, 66.91]%), 16.20 [10.35, 30.52] mm³ (18.20 [9.88, 24.74]%), 17.48 [8.42, 21.17] mm³ (24.05 [12.39, 28.22]%), and 6.87 [3.88, 9.45] mm³ (11.34 [5.14, 22.54]%), respectively. Significant positive correlations between 2D and 3D measurements were consistently identified in the cervical and middle segments, but no significant correlation was noted in the vertical segment.

CONCLUSIONS

The results revealed that linear measurements could not fully represent volumetric bone dimensional changes. Performing volumetric measurements and 3D rendering could be valuable in presenting the actual amount and topography of peri-implant bone remodeling.

CLINICAL SIGNIFICANCE

Linear measurements only partially represent the real-life event of 3D bone changes at immediate implant sites. Factors affecting hard tissue alterations following IIP should be reassessed using 3D volumetric measurement outcomes.

Success Rates and Complications Associated with Single Immediate Implants: A Systematic Review

This study examined the success rates of single immediate implants and their associated biological, hardware and aesthetic complications. Using a developed search strategy, randomized controlled trials (RCTs) on single-unit immediate implants with at least six human participants, a minimum follow-up time of 12 months and published between January 1999 and January 2021 were identified. Data was extracted independently using pre-designed data extraction forms. Information on success rates and associated biological, hardware and aesthetic complications were obtained and assessed. Out of 191 potentially eligible studies, 26 RCTs assessing 1270 patients with a total of 1326 single implants were included and further evaluated. In this review, success rate was reported to be 96.7–100% over a total of 9 studies. However, there was a lack of consensus on a universal success criterion between authors emphasizing the need for agreement. The average follow up was 29 months and most reported complications were aesthetic (63 cases, 4.7%), whilst there were relatively fewer biological, (20 cases, 1.5%), and hardware complications (24 cases, 1.8%). Success rate is an uncommon clinical outcome with 9 out of 26 of the selected RCTs reporting it. In these studies, single immediate implants showed a high success rate with low numbers of biological and hardware complications, and high patient satisfaction with aesthetics were reported in the short-term follow-up of one year.

A 3-year prospective randomized clinical trial of alveolar bone crest response and clinical parameters through 1, 2, and 3 years of clinical function of implants placed 4 months after alveolar ridge preservation using two different allogeneic bone-grafting materials

PURPOSE

The aim of this study was to longitudinally evaluate changes in alveolar bone crest (ABC) levels and differences in resorption rates (RR) between the tested grafting materials following alveolar ridge preservation (ARP) after tooth extraction after 1, 2, and 3 years (T1-T8) of clinical function.

METHODS

Patients were randomly assigned to two different bone allografts (group 1 maxgraft®, group 2 Puros®) for ARP. Non-restorable teeth were minimal traumatically extracted. Sockets were augmented with the tested materials and covered with a pericardium membrane. After 4 months of healing, 36 implants were placed and sites were clinically and radiographically monitored in the mesial (ABC-M), the distal (ABC-D, T1-T8), the bucco-lingual (ABC-BL), buccal (ABC-B) and oral (ABC-O) aspect (T1-T4).

RESULTS

Changes in (ABC-M), (ABC-D), (ABC-BL), (ABC-B), and (ABC-O) levels showed statistically highly significant differences between T1 and T2 for both bone allografts (p < 0.001). Changes at the ABC-M and ABC-BL levels between T2 and T3 of group 1 showed a statistically significant difference (p < 0.001). Both groups achieved and maintained increased ABC levels without statistically significant differences throughout the monitoring periods of 1-3 years (T6-T8) of clinical function. No failures or adverse events were observed.

CONCLUSIONS

To the best of our knowledge, this study is within its limitations the first study to directly compare ABC-changes and differences in RR of two different allogeneic grafting materials for a period of 3 years after ARP. It was demonstrated to be, despite significant differences in RR, a successful method of preserving increased ABC levels through 1, 2, and 3 years of clinical function. Trial registration DRKS00013010, registered 07/30/2018, http://apps.who.int/trialsearch.

Does initial buccal crest thickness affect final buccal crest thickness after flapless immediate implant placement and provisionalization: A prospective cone beam computed tomogram cohort study

BACKGROUND

Flapless immediate implant placement and provisionalization (FIIPP) in the aesthetic zone is still controversial. Especially, an initial buccal crest thickness (BCT) of ≤1 mm is thought to be disruptive for the final buccal crest stability jeopardizing the aesthetic outcome.

PURPOSE

To radiographically assess the BCT and buccal crest height (BCH) after 1 year and to calculate the correlation between initial and final achieved BCT.

MATERIALS AND METHODS

The study was designed as a prospective study on FIIPP. Only patients were included in whom one maxillary incisor was considered as lost. In six centers, 100 consecutive patients received FIIPP. Implants were placed in a maximal palatal position of the socket, thereby creating a buccal space of at least 2 mm, which was subsequently filled with a bovine bone substitute. Files of preoperative (T0), peroperative (T1) and 1-year postoperative (T3) cone beam computed tomogram (CBCT) scans were imported into the Maxillim™ software to analyze the changes in BCT-BCH over time.

RESULTS

Preoperatively, 85% of the cases showed a BCT ≤1 mm, in 25% of the patients also a small buccal defect (≤5 mm) was present. Mean BCT at the level of the implant-shoulder increased from 0.6 mm at baseline to 3.3 mm immediate postoperatively and compacted to 2.4 mm after 1 year. Mean BCH improved from 0.7 to 3.1 mm peroperatively, and resorbed to 1.7 mm after 1 year. The Pearson correlation of 0.38 between initial and final BCT was significant (p = 0.01) and therefore is valued as moderate. If only patients (75%) with an intact alveolus were included in the analysis, still a "moderate correlation" of 0.32 (p = 0.01) was calculated.

CONCLUSIONS

A "moderate correlation" was shown for the hypothesis that "thinner preoperative BCT's deliver thinner BCT's" 1 year after performing FIIPP.

The soft tissue esthetic outcome with and without immediate provisionalization in immediate implants: A systematic review and meta-analysis

Aim

This systematic review and meta-analysis aimed at checking influences of immediate provisionalization on the primary esthetic outcome by Pink Esthetic Score (PES) as well as other secondary soft tissue outcomes such as bleeding on probing, probing depth, plaque index, mesial papillary recession, distal papillary recession, and midfacial mucosal recession of the peri-implant mucosa around immediately placed implants in the anterior maxilla.

Setting and Design

This systematic review and meta-analysis was evaluated using the Preferred Reporting Items for Systematic Review and Meta-Analysis guidelines.

Materials and Methods

The relevant studies were found in the databases such as MEDLINE (PubMed), the Cochrane Central Register of Controlled Trials, Science Direct, and Google Scholar. The search was restricted to studies published in English only, with no time constraints. A second hand search was conducted on individual journals and study reference lists. The Evidence Project risk-of-bias tool was used to assess the risk of bias in included studies. The level of evidence was determined using the GRADEpro GDT: GRADEpro Guideline Development Tool (software). McMaster University, 2020 (developed by Evidence Prime, Inc.,).

Statistical Analysis Used

The statistical meta-analysis was conducted by using Review Manager (RevMan) (Computer Program). Version 5.4. Copenhagen: The Nordic Cochrane Centre, the Cochrane Collaboration, 2020.

Results

Nine studies were finalized. Seven studies were selected out of nine in the meta-analysis for PES. The results of the current meta-analysis for primary outcome observed that immediate implant placement (IIP) followed by immediate provisionalization improves the esthetic outcome, with forest plot favoring immediate provisionalization and demonstrating a statistically significant difference (mean difference [MD] =1.54, [95% confidence interval (CI): 0.82-2.27], P < 0.0001). Statistically insignificant result was observed for secondary outcomes; bleeding on probing (MD = 4.00, [95% CI: -1.15-9.15], P = 0.13), probing depth (MD = 0.17, [95% CI: -0.13-0.48], P = 0.26), plaque index (MD = -1.00, [95% CI: -7.56-5.56], P = 0.77), mesial papillary recession (MD = -0.10, [95% CI: -0.31-0.10], P = 0.33), midfacial mucosal recession (MD = -0.47, [95% CI: -1.01-0.07], P = 0.09). However, for distal papillary recession (MD = -0.32, [95% CI: -0.50--0.13], P = 0.0007), the result was statistically significant with forest plot favoring immediate provisionalization.

Conclusion

When the implant is placed in the esthetic zone, IIP with immediate provisionalization provides the best gingival (pink) esthetics.

Preventive Antibiotic Therapy in the Placement of Immediate Implants: A Systematic Review

Immediate implants present a high risk of early failure. To avoid this, preventive antibiotics (PAs) are prescribed; however, their inappropriate administration leads to antimicrobial resistance. The present study aims to clarify whether the prescription of PAs reduces the rate of early failure of immediate implants and to establish guidelines to avoid the overprescription of these drugs. An electronic search of the MEDLINE database (via PubMed), Web of Science, Scopus, LILACS and OpenGrey was carried out. The criteria described in the PRISMA^® statement were used. The search was temporarily restricted from 2010 to 2021. The risk of bias was analysed using the SIGN Methodological Assessment Checklist for Systematic Reviews and Meta-Analyses and the JBI Prevalence Critical Appraisal Tool. After searching, eight studies were included that met the established criteria. With the limitations of this study, it can be stated that antibiotic prescription in immediate implants reduces the early failure rate. Preoperative administration of 2–3 g amoxicillin one hour before surgery followed by 500 mg/8 h for five to seven days is recommended. It is considered prudent to avoid the use of clindamycin in favour of azithromycin, clarithromycin or metronidazole in penicillin allergy patients until further studies are conducted.

The efficacy of immediate implant placement in the anterior maxilla with dehiscence in the facial alveolar bone: A case series

BACKGROUND

There is no clear evidence that immediate implant placement can be applied to cases with dehiscence in the facial alveolar bone prior to extraction.

PURPOSE

To evaluate the results of immediate implant placement in the anterior maxilla with facial alveolar bone dehiscence.

MATERIALS AND METHODS

We super positioned pre- and post-operative cone-beam computed tomography (CBCT) three-dimensional reconstruction images. A CBCT was taken before tooth extraction (T0), when the definitive restoration was placed (T1), and 1 year after placing the definitive restoration (T2). The depth and width of the dehiscence at T0, and the height and width of the facial hard and soft tissues are measured at the implant site at T1 and T2. We calculated the change in the amount of hard and soft tissues from T1 to T2 and determined the correlation between preoperative facial alveolar bone morphology and postoperative gingival recession.

RESULTS

13 women and 7 men were recruited. A total of 20 implants were evaluated. The implant survival rate was 100%. The mean facial alveolar bone dehiscence width was 3.9 ± 1.6 mm, and the mean depth from platform level was 2.9 ± 1.7 mm. The mean implant body exposure on the buccal was 4.8 ± 1.7 mm, and the mean socket width gap was 2.1 ± 0.8 mm. At T1, the mean facial hard tissue width was 2.1 ± 0.7 mm, and the mean height was 2.0 ± 0.7 mm. The mean change in vertical gingival recession from T1 to T2 was 0.5 ± 0.5 mm. We found a positive correlation between facial alveolar bone dehiscence width and gingival recession (r = 0.46, p-value = 0.04) and between dehiscence depth and gingival recession (r = 0.48, p-value = 0.03).

CONCLUSIONS

The results of our CBCT superposition method indicated that immediate implant placement can be considered in patients with facial alveolar bone dehiscence. However, there may be a higher risk of gingival recession with wide or deep dehiscence.

A digital workflow for accurately and rapidly creating an immediate provisional restoration with natural emergence profile using extracted tooth

To describe a digital workflow for creating a provisional restoration by using an extracted tooth rapidly, finally fixing the provisional restoration in the targeted position precisely and preserving the natural emergence profile from the time of provisional restoration to final restoration. CLINICAL CONSIDERATIONS: The use of extracted tooth as an immediate provisional restoration is an effective method for preserving the shape of the emergence profile. However, the existing methods for creating a provisional restoration by using natural tooth are time-consuming and there is no reliable method to precisely attach tooth to temporary abutment. This case demonstrates a new method for using patient's natural tooth as an immediate provisional restoration under a sequence of guides, which significantly reduces the chair-side time and inconvenience for clinicians and patients. Immediate provisional restoration contributes to preserving the soft tissue architecture after post-extraction implant placement, especially when using the patient's tooth as a provisional restoration. Digital technology can help to improve the chair-side clinical efficiency of dentist. CLINICAL SIGNIFICANCE: Maintaining the natural soft tissue architecture is a huge challenge in dental implantology. Use of the extracted tooth as a provisional restoration is likely to achieve an optimal outcome. And digital technology is helpful to the efficiency and accuracy of treatment.

One-year performance of posterior narrow diameter implants in hyperglycemic and normo-glycemic patients-a pilot study

OBJECTIVES

The aim of the study was to compare the performance of narrow diameter implants in patients with uncontrolled diabetes mellitus type 2 (T2DM) and normo-glycemic individuals during the first 12 months after implant loading.

MATERIAL AND METHODS

In 16 T2DM patients with HbA1C > 6.5% (test group) and 16 normo-glycemic patients (HbA1C < 6.0%; control group), one to two narrow diameter tissue level implants were placed in the posterior maxilla or mandible. After 3-month lasting integration period, implants were loaded by fixed dentures. The clinical parameters probing depth (PD), bleeding on probing (BOP), attachment loss (CAL), recession and papilla bleeding index (PBI) were assessed manually at loading and after 12 months of function. The paired digital periapical radiographs were analyzed with regard to the change in marginal bone level (MBL) from baseline to 12 months' control. The mean values calculated for both patient groups were statistically analyzed. The technical complications were recorded.

RESULTS

The T2DM group accounted 13 patients due to 3 dropouts. The overall implant survival rate after 12 months was 100%. The differences in means for the clinical parameters and the MBL were statistically non-significant between the T2DM and normo-glycemic patients for the short period of loaded function reported here. No technical complications were recorded.

CONCLUSIONS

The study demonstrated an encouraging clinical outcome with narrow diameter implants in patients with uncontrolled T2DM compared to non-diabetics after 12 months post loading. For the short observation period, no biological and technical complications were reported regardless the glycemic status.

CLINICAL RELEVANCE

Patients with HbA1C > 6.5% may benefit from the treatment with narrow diameter implants by avoiding complex surgical interventions with augmentation procedures.

TRIAL REGISTRATION

Clinicaltrials.gov : NCT04630691.