The effect of diabetes on bone formation following application of the GBR principle with the use of titanium domes

Bone regeneration in implant dentistry: Which are the factors affecting the clinical outcome?

The key factors that are needed for bone regeneration to take place include cells (osteoprogenitor and immune-inflammatory cells), a scaffold (blood clot) that facilitates the deposition of the bone matrix, signaling molecules, blood supply, and mechanical stability. However, even when these principles are met, the overall amount of regenerated bone, its stability over time and the incidence of complications may significantly vary. This manuscript provides a critical review on the main local and systemic factors that may have an impact on bone regeneration, trying to focus, whenever possible, on bone regeneration simultaneous to implant placement to treat bone dehiscence/fenestration defects or for bone contouring. In the future, it is likely that bone tissue engineering will change our approach to bone regeneration in implant dentistry by replacing the current biomaterials with osteoinductive scaffolds combined with cells and mechanical/soluble factors and by employing immunomodulatory materials that can both modulate the immune response and control other bone regeneration processes such as osteogenesis, osteoclastogenesis, or inflammation. However, there are currently important knowledge gaps on the biology of osseous formation and on the factors that can influence it that require further investigation. It is recommended that future studies should combine traditional clinical and radiographic assessments with non-invasive imaging and with patient-reported outcome measures. We also envisage that the integration of multi-omics approaches will help uncover the mechanisms responsible for the variability in regenerative outcomes observed in clinical practice.

The Effect of Diabetes and Hyperglycemia on Horizontal Guided Bone Regeneration: A Clinical Prospective Analysis

Guided bone regeneration (GBR) is a reconstructive procedure for treating atrophic alveolar ridges. This study aims to assess the correlation between different glycemic control levels and clinical findings in patients undergoing horizontal GBR before implant placement. The study population consisted of all patients requiring horizontal GBR. Patients were divided into three groups based on HbA1c levels: non-diabetic normoglycemic patients (HbA1c < 5.7%), non-diabetic hyperglycaemic patients (HbA1c < 6.5%), and patients with controlled diabetes (HbA1c < 7%). The primary outcomes were the horizontal (mm) and vertical (mm) dimensional changes of the alveolar ridge 6 months after the procedure. The study sample consisted of 54 patients. Sixty-eight implants (95.8%) were classified as "successful," meaning the possibility of inserting a standard-sized implant following the GBR (diameter ≥ 4 mm). There was a statistically significant difference between the three groups in terms of horizontal gain at 6 months: in particular, there was a statistically significant difference between group 1 and group 2 (p = 0.026) and between group 1 and group 3 (p = 0.030). The present investigation showed that patients with HbA1c levels below 7% could undergo GBR and obtain a statistically significant horizontal bone gain.

Osteoinductive hybrid hydrogel membranes for in situ bone regeneration in hyperglycemia

In hyperglycemia patients, suffering from insufficient vascularization and vascular network lesion, tissue regeneration, such as bone repair, is limited and maybe delayed by the secondary injury and hyperglycemic microenvironment. Typically, dental therapies involving guided bone regeneration is facing a difficult condition in the patients with diabetes. In this study, a hybrid membrane was endowed with biomimetic function to create an angiogenesis-inductive microenvironment by calcium ion release to overcome the limitations of bone tissue regeneration in diabetic patients. Biomineralized calcium resource was Janus-structured onto the surface of hybrid hydrogel by layer-by-layer technique to enhance vascularization and improve the bone regeneration in this study. The release of calcium ions from mineralized phases was controlled by the solubility of inorganic phases and the degradation of gels, promoting HIF-1α expression and creating a key role in angiogenesis stimulation. With highly enhanced calcium signaling and blood vessel formation, the hybrid hydrogel membranes improved the recruitment, proliferation and differentiation of mesenchymal stem cells and endothelial progenitors, confirmed by the enhancement of microvascular regeneration and new bone formation in the critical-sized calvarial defect in diabetic model in vivo. Our study demonstrates a translational potential of hybrid hydrogels engineered with inorganic minerals for orthopedic applications in hyperglycemia.

The Effect of Diabetes Mellitus on IGF Axis and Stem Cell Mediated Regeneration of the Periodontium

Periodontitis and diabetes mellitus (DM) are two of the most common and challenging health problems worldwide and they affect each other mutually and adversely. Current periodontal therapies have unpredictable outcome in diabetic patients. Periodontal tissue engineering is a challenging but promising approach that aims at restoring periodontal tissues using one or all of the following: stem cells, signalling molecules and scaffolds. Mesenchymal stem cells (MSCs) and insulin-like growth factor (IGF) represent ideal examples of stem cells and signalling molecules. This review outlines the most recent updates in characterizing MSCs isolated from diabetics to fully understand why diabetics are more prone to periodontitis that theoretically reflect the impaired regenerative capabilities of their native stem cells. This characterisation is of utmost importance to enhance autologous stem cells based tissue regeneration in diabetic patients using both MSCs and members of IGF axis.

The Effect of Controlled Diabetes and Hyperglycemia on Implant Placement with Simultaneous Horizontal Guided Bone Regeneration: A Clinical Retrospective Analysis

Diabetes represents a challenge in implant therapy because hyperglycemia may negatively affect bone regeneration, directly compromising clinical outcomes and increasing clinical failures. The aim of this retrospective study is to analyse the prognostic significance of HbA1c levels in patients undergoing implant placement associated with horizontal guided bone regeneration. Thirty-four patients were divided into 3 groups according to their HbA1c levels: nondiabetic normoglycemic patients (HbA1c < 5.7%), nondiabetic hyperglycemic patients (HbA1c < 6.5%), and controlled diabetic patients (HbA1c < 7%). Primary outcomes were dimensional changes in height (VDH) and width (DW) of the peri-implant defect. Secondary outcomes were evaluations of periodontal parameters of adjacent tooth sites, wound healing, marginal bone loss (MBL), and survival and success rates. At T₁ (6 months), mean VDH values in groups 1, 2, and 3 were, respectively, 0.07, 0.5, and 0.25 mm. Mean DW values in those same groups were, respectively, 0.07, 0.38, and 0.33 mm. HbA1c levels were not statistically related to VDH and DW values at T₁. No statistically significant differences were observed in MBL between groups (p = 0.230). Implant survival and success rates were, respectively, 98% and 96%. Simultaneous guided bone regeneration is a feasible procedure for the treatment of horizontal bone deficiencies in controlled diabetic patients.

Histomorphometric analysis of implant osseointegration using hydrophilic implants in diabetic rats

OBJECTIVES

To evaluate peri-implant bone formation of titanium implants using an in vivo rat model with and without uncontrolled diabetes mellitus (DM) to evaluate osseointegration of hydrophobic (Neoporos®) and hydrophilic (Acqua®) surfaces.

MATERIALS AND METHODS

54 rats were divided into two groups: DM group (DMG) (streptozotocin-induced diabetes) and a control group (CG). Implants with hydrophobic (Neoporos®) and hydrophilic surfaces (Acqua®) were placed in the left or right tibia of animals. Animals were further divided into three groups (n = 9) euthanized after 7, 14, or 28 days. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were assessed in total, cortical, and medullary areas.

RESULTS

The DMG group, after a 7-day healing period, yielded with the Acqua implants presented significantly higher total BIC (+37.9%; p=0.03) and trabecular BIC (%) (+46.3%; p=0.02) values in comparison to the Neoporos implants. After 28 days of healing, the CG yielded that the cortical BAFO of Acqua implants to be significantly, 14%, higher (p=0.04) than Neoporos implants.

CONCLUSION

The positive effects of the Acqua surface were able to counteract the adverse impact of uncontrolled DM at early osseointegration periods. After 28 days in vivo, the metabolic systemic impairment caused by DM overcame the surface treatment effect, leading to impaired osseointegration in both hydrophilic and hydrophobic implants.

CLINICAL RELEVANCE

The adverse effects of diabetes mellitus with respect to bone healing may be minimized by deploying implants with strategically modified surfaces. This study evaluated the effects of implants with Acqua® and Neoporos® surfaces in both diabetic and healthy animals. During the initial healing period in diabetic animals, the hydrophilic surface was demonstrated to have beneficial effect on osseointegration in comparison to the hydrophobic surface. The results provide an insight into early healing, but the authors suggest that a future short-term and long-term clinical study is needed to assess the possible benefit of the Acqua® implant as well as in increasing the predictability of implant osseointegration.

Periodontal regenerative therapy in patients with type 2 diabetes using minimally invasive surgical technique with enamel matrix derivative under 3-year observation: A prospective cohort study

BACKGROUND

Information regarding periodontal regenerative therapy in patients with diabetes mellitus (DM) is limited. This pilot study compared the regenerative outcomes of minimally invasive periodontal surgery using enamel matrix derivative (EMD) between DM and non-DM patients.

METHODS

This prospective study included deep intrabony defects in patients with or without type 2 DM. Minimally invasive surgical technique (MIST) or modified MIST (M-MIST) using EMD, without bone graft materials, was performed. Periodontal examination and intraoral radiography were performed at baseline, 6 months, and 1 and 3 years after surgery.

RESULTS

Ten sites of 10 subjects in the DM group, and 20 sites of 18 subjects in non-DM group were evaluated (mean age; 67.5 ± 7.6 and 63.1 ± 9.7, respectively). Probing depth significantly decreased from 7.1 ± 1.6 and 7.0 ± 1.3 mm to 2.2 ± 0.9 and 2.3 ± 1.1 mm at the 1-year examination in the DM and non-DM groups, respectively. Clinical attachment level (CAL) gain and radiographical defect fill at the 3-year examination were 3.8 ± 1.1 mm and 58.3% ± 10.4%, respectively, in the DM group, and 4.1 ± 1.1 mm and 65.5% ± 18.8%, respectively, in the non-DM group, showing no significant differences between the groups. Multiple regression analysis showed no significant association of CAL gain with DM or age after adjustments for relevant confounders.

CONCLUSIONS

This is the first documented study of successful periodontal tissue regeneration in patients with DM. Minimally invasive surgery combined with EMD yielded significant clinical attachment gain and bone fill in the DM and non-DM groups at comparable levels.

Re-establishment of macrophage homeostasis by titanium surface modification in type II diabetes promotes osseous healing

Titanium surface mediated immunomodulation may address compromised post-implantation bone healing in diabetes mellitus. To assess in vitro phenotypic changes, M1 and M2 polarised Type 2 diabetic rat (Goto Kakizaki, GK) macrophages were cultured on micro-rough (SLA) or hydrophilic nanostructured SLA (modSLA) titanium. The in vivo effects of the SLA and modSLA surfaces on macrophage phenotype, wound-associated protein expression and bone formation were investigated using a critical-sized calvarial defect model. Compared to healthy macrophages, GK M2 macrophage function was compromised, secreting significantly lower levels of the anti-inflammatory cytokine IL-10. The modSLA surface attenuated the pro-inflammatory cellular environment, reducing pro-inflammatory cytokine production and promoting M2 macrophage phenotype differentiation. ModSLA also suppressed gene expression associated with macrophage multinucleation and giant cell formation and stimulated pro-osteogenic genes in co-cultured osteoblasts. In vivo, modSLA enhanced osteogenesis compared to SLA in GK rats. During early healing, proteomic analysis of both surface adherent and wound exudate material showed that modSLA promoted an immunomodulatory pro-reparative environment. The modSLA surface therefore successfully compensated for the compromised M2 macrophage function in Type 2 diabetes by attenuating the pro-inflammatory response and promoting M2 macrophage activity, thus restoring macrophage homeostasis and resulting in a cellular environment favourable for enhanced osseous healing.

Bone regeneration in diabetic patients. A systematic review

Background

Oral bone regeneration techniques (OBRT) attempt to provide the appropriate bone volume and density to correctly accomplish dental implant treatments. The objective was to determine whether differences exist in the clinical outcomes of these techniques between diabetic and non-diabetic patients, considering the level of scientific evidence.

Material and Methods

A systematic review following PRISMA statements was conducted in the PubMed, Scopus and Cochrane databases with the search terms: “Diabetes Mellitus”, “guided bone regeneration”, “bone regeneration”, “alveolar ridge augmentation”, “ridge augmentation”, bone graft*, “sinus floor augmentation”, “sinus floor elevation”, “sinus lift”, implant*. Articles were limited to those published less than 10 years ago and in English. Inclusion criteria were: human studies of all bone regeneration techniques, including at least 10 patients and the using OBRT in diabetic and non-diabetic patients. Non-human studies were excluded. They were stratified according to their level of scientific evidence related to SORT criteria (Strength of Recommendation Taxonomy).

Results

The initial search provided 131 articles, after reading the abstracts a total of 33 relevant articles were selected to read the full text and analyzed to decide eligibility. Finally, seven of them accomplished the inclusion criteria: two controlled clinical trials, one cohort study and four case series.

Conclusions

A low grade of evidence regarding the use of OBRT in diabetic patients was found. The recommendation for this intervention in diabetic patients is considered type C due to the high heterogeneity of the type of diabetic patients included and the variability of the techniques applied.

Key words:Diabetes Mellitus, guided bone regeneration, bone regeneration.

Ultraviolet Functionalization Improved Bone Integration on Titanium Surfaces by Fluorescent Analysis in Rabbit Calvarium

This study evaluated the effect of ultraviolet functionalization (UV) on bone integration ability in rabbit model, using epifluorescence microscopy. Each of 12 rabbits (n = 6) received randomly four titanium domes prepared with or without ultraviolet for 48 hours (UVC, λ = 250 ± 20 nm; Philips, Tokyo, Japan): (1) turned surface (T), (2) turned surface with UV (T-UV), (3) sandblasted (120 μm aluminum oxide) and etched by 18% hydrochloric acid and 49% sulphuric acid at 60°C for 30 min (SLA) and (4) SLA surface with UV (SLA-UV). Fluorochrome bone labels were marked by oxytetracycline at 25 mg/kg on 13th days and 14th days and calcein at 5 mg/kg on 3th days and 4th days before euthanization. The study samples were sacrified at 2 weeks and 4 weeks. The undecalcified specimens were prepared. The newly formed total bone of cross-sectional area (TB, %), the mineralized trabecular bone of cross-sectional area (MB, %), and the new bone and dome contact (BDC, %) were measured and analyzed by fluorescence microscope and Image Pro Express 6.0. The data of MB and TB showed new bone regeneration was increased in all groups, but no signs of difference were found. However, the means BDC of UV treatment on turned surface at 4 weeks, the UV treated on SLA surface at 2 weeks and 4 weeks were statistically significantly higher than the control group (P &lt; .05). Within the limitations of the study, it can be concluded that ultraviolet functionalization on the titanium surface could enhance the new bone tissues and titanium surface integration.

Effects of aspirin-loaded graphene oxide coating of a titanium surface on proliferation and osteogenic differentiation of MC3T3-E1 cells

Graphene oxide (GO) has attracted considerable attention for biomedical applications such as drug delivery because of its two-dimensional structure, which provides a large surface area on both sides of the nanosheet. Here, a new method for titanium (Ti) surface modification involving a GO coating and aspirin (A) loading (A/Ti-GO) was developed, and the bioactive effects on mouse osteoblastic MC3T3-E1 cells were preliminarily studied. The X-ray photoelectron spectrometry indicated new C-O-N, C-Si-O-C, and C-N=C bond formation upon GO coating. Remarkably, the torsion test results showed stable bonding between the GO coating and Ti under a torsional shear force found in clinical settings, in that, there was no tearing or falling off of GO coating from the sample surface. More importantly, through π-π stacking interactions, the release of aspirin loaded on the surface of Ti-GO could sustain for 3 days. Furthermore, the A/Ti-GO surface displayed a significantly higher proliferation rate and differentiation of MC3T3-E1 cells into osteoblasts, which was confirmed by a water-soluble tetrazolium salt-8 (WST-8) assay and alkaline phosphatase activity test. Consequently, Ti surface modification involving GO coating and aspirin loading might be a useful contribution to improve the success rate of Ti implants in patients, especially in bone conditions.

Periodontal materials and cell biology for guided tissue and bone regeneration

The present review is intended to find links between periodontal materials of the dentomaxillary apparatus and cell biology at the beginning of a century fraught with various forms of periodontal diseases and needing new treatment strategies. The manuscript has two different parts. The first describes the anatomy of tooth supporting structures, as well as related pathologies. The second part is related to cell and molecular biology in the context of periodontal regeneration.

Protein expression during early stages of bone regeneration under hydrophobic and hydrophilic titanium domes. A pilot study

BACKGROUND AND OBJECTIVES

There is significant evidence that, during the early stages of osseointegration, moderately rough hydrophilic (SLActive) surfaces can accelerate osteogenesis and increase bone-to-implant contact in comparison to hydrophobic (SLA) surfaces. However, very little is known regarding the molecular mechanisms behind the influence that surface chemistry modifications to increase hydrophilicity determine on bone healing. The aim of this study was to describe for the first time the proteins and related signalling pathways expressed during early osseous healing stages under SLA and SLActive titanium domes for guided bone regeneration.

MATERIAL AND METHODS

One SLA and 1 SLActive dome with an internal diameter of 5.0 mm and a height of 3.0 mm were secured to the parietal bones of nine 6-month-old male New Zealand rabbits. Three animals were randomly euthanized at 4, 7 and 14 days and the newly formed tissues retrieved under the domes were analysed with liquid chromatography-mass spectrometry/mass spectrometry. STRING and KEGG databases were applied for Gene Ontology and pathway analyses.

RESULTS

A different modulation of several pathways was detected between the 2 groups at all healing times. The main differences in the osseous healing response associated to the 2 surfaces were related to pathways involved in regulating the inflammatory response, differentiation of osteoblast precursors and skeletogenesis. At day 7, the highest number of proteins and the highest cellular activity were observed in both groups, although a more complex and articulated proteome in terms of cellular metabolism and signal transduction was observed in SLActive samples.

CONCLUSION

This is the first study describing the proteome expressed during early healing stages of guided bone regeneration and osseointegration. A combination of enhanced early osteogenic response and reduced inflammatory response were suggested for the hydrophilic group. Future studies are needed to corroborate these findings and explore the molecular effects of different titanium surfaces on the cascade of events taking place during bone formation.

The effect of experimental diabetes and glycaemic control on guided bone regeneration: histology and gene expression analyses

OBJECTIVES

To investigate the effect of experimental diabetes and metabolic control on intramembranous bone healing following guided bone regeneration (GBR).

MATERIAL AND METHODS

Ninety-three Wistar rats were allocated to three experimental groups, healthy (H), uncontrolled diabetes (D) and controlled diabetes (CD). Twenty one days following diabetes induction, a standardised 5-mm defect was created at the mid-portion of each parietal bone. In 75 animals (25H, 25D, 25CD), one defect was treated with an intracranial and extracranial membrane according to the GBR principle, and one defect was left empty (control); five animals per group were then randomly sacrificed at 3, 7, 15, 30 and 60 days and processed for decalcified histology. In 18 animals (6H, 6D, 6CD), both defects were treated according to the GBR principle; three animals from each group were then randomly sacrificed at 7 and 15 days of healing and employed for gene expression analysis.

RESULTS

Application of the GBR therapeutic principle led to significant bone regeneration even in the D group. However, at 15 and 30 days, the osteogenesis process was impaired by uncontrolled diabetes, as shown by the significant reduction in terms of defect closure (38-42%) and newly formed bone (54-61%) compared to the healthy group. The comparison of the D vs. H group at 15 days of healing yielded the largest number of genes with significantly differential expression, among which various genes associated with the ossification process (bmp4, ltbp4, thra and cd276) were identified.

CONCLUSIONS

Uncontrolled diabetes seems to affect early phases of the bone regeneration following GBR. A misregulation of genes and pathways related to cell division, energy production, inflammation and osteogenesis may account for the impaired regeneration process in D rats. Further studies are warranted to optimise the GBR process in this medically compromised patient population.

Wound models for periodontal and bone regeneration: the role of biologic research

The ultimate goals of periodontal therapy remain the complete regeneration of those periodontal tissues lost to the destructive inflammatory-immune response, or to trauma, with tissues that possess the same structure and function, and the re-establishment of a sustainable health-promoting biofilm from one characterized by dysbiosis. This volume of Periodontology 2000 discusses the multiple facets of a transition from therapeutic empiricism during the late 1960s, toward regenerative therapies, which is founded on a clearer understanding of the biophysiology of normal structure and function. This introductory article provides an overview on the requirements of appropriate in vitro laboratory models (e.g. cell culture), of preclinical (i.e. animal) models and of human studies for periodontal wound and bone repair. Laboratory studies may provide valuable fundamental insights into basic mechanisms involved in wound repair and regeneration but also suffer from a unidimensional and simplistic approach that does not account for the complexities of the in vivo situation, in which multiple cell types and interactions all contribute to definitive outcomes. Therefore, such laboratory studies require validatory research, employing preclinical models specifically designed to demonstrate proof-of-concept efficacy, preliminary safety and adaptation to human disease scenarios. Small animal models provide the most economic and logistically feasible preliminary approaches but the outcomes do not necessarily translate to larger animal or human models. The advantages and limitations of all periodontal-regeneration models need to be carefully considered when planning investigations to ensure that the optimal design is adopted to answer the specific research question posed. Future challenges lie in the areas of stem cell research, scaffold designs, cell delivery and choice of growth factors, along with research to ensure appropriate gingival coverage in order to prevent gingival recession during the healing phase.

Chondroitin sulphate-guided construction of polypyrrole nanoarchitectures

Nanospheres, nanocones, and nanowires are three typical polypyrrole (PPy) nanoarchitectures and electrochemically polymerized with the dope of chondroitin sulphate (CS) in this study. CS, a functional biomacromolecule, guides the formation of PPy nanoarchitectures as the dopant and morphology-directing agent. Combined with our previous reported other PPy nanoarchitectures (such as nanotube arrays and nanowires), this work further proposed the novel mechanism of the construction of PPy/CS nanoarchitectures with the synergistic effect of CS molecular chains structure and the steric hindrance. Compared to the undoped PPy, MC3T3-E1 cells with PPy/CS nanoarchitectures possessed stronger proliferation and osteogenic differentiation capability. This suggests that PPy/CS nanoarchitectures have appropriate biocompatibility. Altogether, the nanoarchitectured PPy/CS may find application in the regeneration of bone defect.

Enhanced MC3T3-E1 preosteoblast response and bone formation on the addition of nano-needle and nano-porous features to microtopographical titanium surfaces

Micro/nanotopographical modifications on titanium surfaces constitute a new process to increase osteoblast response to enhance bone formation. In this study, we utilized alkali heat treatment at high (SB-AH1) and low temperatures (SB-AH2) to nano-modify sandblasted titanium with microtopographical surfaces. Then, we evaluated the surface properties, biocompatibility and osteogenic capability of SB-AH1 and SB-AH2 in vitro and in vivo, and compared these with conventional sandblast-acid etching (SLA) and Ti control surfaces. SB-AH1 and SB-AH2 surfaces exhibited micro/nanotopographical modifications of nano-needle structures and nano-porous network layers, respectively, compared with the sole microtopographical surface of macro and micro pits on the SLA surface and the relatively smooth surface on the Ti control. SB-AH1 and SB-AH2 showed different roughness and elemental components, but similar wettability. MC3T3-E1 preosteoblasts anchored closely on the nanostructures of SB-AH1 and SB-AH2 surfaces, and these two surfaces more significantly enhanced cell proliferation and alkaline phosphatase (ALP) activity than others, while the SB-AH2 surface exhibited better cell proliferation and higher ALP activity than SB-AH1. All four groups of titanium domes with self-tapping screws were implanted in rabbit calvarial bone models, and these indicated that SB-AH1 and SB-AH2 surfaces achieved better peri-implant bone formation and implant stability, while the SB-AH2 surface achieved the best percentage of bone-implant contact (BIC%). Our study demonstrated that the micro/nanotopographical surface generated by sandblasting and alkali heat treatment significantly enhanced preosteoblast proliferation, ALP activity and bone formation in vitro and in vivo, and nano-porous network topography may further induce better preosteoblast proliferation, ALP activity and BIC%.