An in vitro comparison of thermoplasticised gutta-percha obturation techniques with cold lateral condensation

Comparison of push-out bond strength of three different obturating systems to intraradicular dentin: An In vitro study

Background:

To increase the push-out bond strength of endodontic materials, newer obturation materials and obturation techniques are being introduced.

Aim:

The present study aimed to evaluate the push-out bond strength of three different obturating materials using a universal testing machine (UTM).

Materials and Methods:

A total of thirty freshly extracted maxillary anterior teeth were collected and randomly divided into three groups of ten each. Biomechanical preparation was done in all the teeth, and they were then divided into three experimental groups according to the obturation material and technique used, as follows: Group I: gutta-percha (GP) with AH Plus root canal sealer (lateral condensation); Group II: thermoplasticized GP technique – noncarrier based (CALAMUS^®) with AH Plus sealer (backfill); and Group III: C-points (self-sealing root canal obturating system) with bioceramic sealer (single cone). Each specimen was subjected to push-out test using the UTM, where the punch moved in an apical to coronal direction at a crosshead speed of 0.5 mm/min, which resulted in the displacement of the filling material. The depth of dye penetration was examined under a stereomicroscope at ×30 magnification.

Results:

All the analyses were performed using SPSS software version 16. P < 0.05 was considered statistically significant. Comparisons of mean values were done using ANOVA with post hoc Games–Howell test and ANOVA with post hoc Tukey's test. Group III demonstrated the highest mean push-out bond strength and Group I exhibited the least bond strength. A statistically significant difference was found between Group III and Group I with regard to the push-out bond strength assessment.

Conclusion:

Push-out bond strength differs among different obturation materials and obturation techniques.

Quality of root canal fillings using three gutta-percha obturation techniques

Objectives

The goal of this study was to compare the density of gutta-percha root fillings obturated with the following techniques: cold lateral (CL) compaction, ultrasonic lateral (UL) compaction, and warm vertical (WV) compaction.

Materials and Methods

Thirty-three extracted mandibular first molars, with two separate mesial canals in each, were selected. After instrumentation, the canals were stratified into three groups based on canal length and curvature, and underwent obturation with one of the techniques. No sealer was used in order to avoid masking any voids. The teeth were imaged pre- and post-obturation using micro-computed tomography. The reconstructed three-dimensional images were analyzed volumetrically to determine the amount of gutta-percha present in every 2 mm segment of the canal. P values < 0.05 were considered to indicate statistical significance.

Results

The overall mean volume fraction of gutta-percha was 68.51 ± 6.75% for CL, 86.56 ± 5.00% for UL, and 88.91 ± 5.16% for WV. Significant differences were found between CL and UL and between CL and WV (p < 0.05), but not between UL and WV (p = 0.526). The gutta-percha density of the roots treated with WV and UL increased towards the coronal aspect, but this trend was not noted in the CL group.

Conclusions

WV compaction and UL compaction produced a significantly denser gutta-percha root filling than CL compaction. The density of gutta-percha was observed to increase towards the coronal aspect when the former two techniques were used.

A Prospective Randomized Comparative Study of Cold Lateral Condensation Versus Core/Gutta-percha in Teeth with Periapical Lesions

INTRODUCTION

The aim of this study was to compare the outcome of root canal treatment using either Thermafil (TF; Dentsply Maillefer, Ballaigues, Switzerland) or the cold lateral condensation (CLC) obturation technique in teeth with periapical lesions and to investigate the influence on postoperative pain and treatment outcomes.

METHODS

After standardized root canal preparation technique, 112 teeth were obturated with either the TF or the CLC technique during 2 sessions by single operator. Postoperative pain, obturation length, and treatment outcomes were recorded. The teeth were reviewed clinically and radiographically for 2 years.

RESULTS

Although there were no significant differences between the techniques in the incidence of postoperative pain at 24 hours (P > .05), the incidence of pain was significantly higher in the TF group than in the CLC group at 48 hours (P < .05). During the 2-year follow-up period, there was no statistically significant difference in the success rate of the teeth treated with TF (96.4%) in comparison with those treated with CLC (98.2%) (P > .05).

CONCLUSIONS

In this study, the outcome of the root canal treatment of teeth using the TF and CLC techniques revealed that these techniques are useful for root canal obturation.

Quality of root fillings performed with two root filling techniques. An in vitro study using micro-CT

Objective.

The aim of this study was to compare the presence of voids in root fillings performed in oval and ribbon-shaped canals with two root filling techniques, lateral compaction technique (LCT) or hybrid technique (HT), a combination of a gutta-percha masterpoint and thermoplastic gutta-percha. Furthermore, the obturation time for the two techniques was evaluated.

Materials and methods.

Sixty-seven roots with oval and ribbon-shaped canals were prepared using Profile Ni-Ti rotary files. After preparation, the roots were randomly allocated to two groups according to root filling technique. All roots were filled with AH plus and gutta-percha. Group 1 was filled using LCT (n = 34) and group 2 was filled using HT (n = 33). The obturation time was measured in 30 cases evenly distributed between the two techniques. Voids in relation to the root canal fillings were assessed using cross-section images from Micro-computed Tomography scans.

Results.

All root canal fillings had voids. Permutation test showed no statistically significant difference between the two root filling techniques in relation to presence of voids (p = 0.092). A statistically significant difference in obturation time between the two techniques was found (p < 0.001).

Conclusion.

The present study found no statistically significant difference in percentage of voids between two root filling techniques. A 40% reduction in obturation time was found for the HT compared to the LCT.

Sealing ability of lateral condensation, thermoplasticized gutta-percha and flowable gutta-percha obturation techniques: A comparative in vitro study

Aim:

To evaluate and compare the sealing ability between the clod lateral condensation, thermoplasticized gutta-percha, and flowable gutta-percha obturation technique, under a stereomicroscope at ×40 magnification.

Materials and Methods:

Sixty single rooted teeth were selected and canals were shaped with K3 NiTi files. Irrigation was performed with 5.25% NaOCl and 17% ethylenediaminetetraacetic acid (EDTA). The teeth were then separated into three groups depending on the type of obturation technique: Group A, obturated using the lateral condensation technique and AH Plus sealer; Group B, obturated with thermoplasticized gutta-percha tech (Obtura III Max) and AH Plus sealer; and Group C, obturated using flowable gutta-percha technique (GuttaFlow). After storing the teeth in 100% humidity for 7 days at 37°C, the roots of the teeth were sectioned at five levels. The sections were then observed under a stereomicroscope at ×40 magnification and the images were analyzed for area of voids (AV) and frequency of voids. The data were statistically analyzed using the SPSS version 17 software. The 95% confidence intervals (CI) were calculated. One-way analysis of variance with post hoc test and non-parametric Mann–Whitney U test were carried out to compare the means.

Results:

The lowest mean of AV was recorded in the thermoplasticized gutta-percha (Obtura III Max) group [1.0% (95% CI=0.5–1.5)]. This was statistically and significantly different from flowable gutta-percha (GuttaFlow) group [3.0% (95% CI=2.1–3.9)]. There was no significant difference between the thermoplasticized gutta-percha group and lateral condensation group [1.6% (95% CI=1.0–2.2)] with regard to the AV, but there was a statistically significant difference between the lateral condensation and flowable gutta-percha groups. The flowable gutta-percha group showed the maximum number of voids [56% (95% CI=48–64)], which was significantly higher than those in the lateral condensation [26% (95% CI=19–34)] and thermoplasticized gutta-percha [15% (95% CI=10–21)] groups.

Conclusion:

The thermoplasticized gutta-percha technique (Obtura III Max) had better adaptability to the canal walls when compared to the flowable gutta-percha (GuttaFlow) obturation and lateral condensation techniques.

An in vitro assessment of apical microleakage in root canals obturated with gutta-flow, resilon, thermafil and lateral condensation: A stereomicroscopic study

Aim:

The purpose of this study was to evaluate and compare the apical microleakage of Resilon to Thermafil, Gutta-flow and Cold lateral condensation using a dye penetration method.

Materials and Methods:

Sixty extracted human maxillary single rooted teeth with intact roots were selected. Decoronation was followed by canal preparation upto ISO size 50. Teeth were then randomly divided into four groups for obturation. Group I – Cold lateral condensation with AH Plus, Group II – Gutta-flow with master cone, Group III– Thermafil with AH Plus, Group IV– Resilon with Self-etch epiphany. Apical microleakage was assessed by dye penetration test under stereomicroscope.

Result:

The result was analyzed statistically and showed that Resilon provides a best seal. Gutta-flow exhibited maximum microleakage. All the four groups at some level or the other exhibited some percentage of microleakage.

Conclusions:

None of the methods showed a fluid-tight seal.

Evaluation and comparison of sealing ability of three different obturation techniques - Lateral condensation, Obtura II, and GuttaFlow: An in vitro study

AIM

To evaluate and compare the sealing ability between the conventional cold lateral condensation technique and two different obturating techniques - Obtura II and GuttaFlow under a stereomicroscope at 40× magnification.

MATERIALS AND METHODS

Sixty single-rooted teeth were selected and the canals were shaped with ProTaper rotary files. Irrigation was performed with 5% sodium hypochlorite and 17% EDTA. The teeth were then separated into three groups depending on the type of obturation technique. Group A (n = 20) - obturated using the Lateral condensation technique and AHplus sealer, Group B (n = 20) - obturated with Obtura II injection-molded thermoplasticized technique and AHplus sealer, and Group C (n = 20) obturated using GuttaFlow. After storing the teeth in 100% humidity for seven days at 37°C, the roots of the teeth were sectioned at five levels. The sections were then observed under a stereomicroscope at 40 × magnification and the images were analyzed for area of voids (AV) and frequency of voids.

STATISTICAL ANALYSIS USED

The data was statistically analyzed using the SPSS version 17 software. The 95% confidence intervals (CI) were calculated. One-way analysis of variance with post-hoc test and non-parametric Mann-Whitney U test was carried out, to compare the means.

RESULTS

The lowest mean of AV was recorded in the Obtura II group, 1.0% (95% CI = 0.5 - 1.5). This was statistically and significantly different from the GuttaFlow group, 3.0% (95% CI = 2.1 - 3.9). There was no significant difference between the Obtura II group and the lateral condensation group, 1.6% (95% CI= 1.0 - 2.2) with regard to the area of voids, but there was a statistically significant difference between the Lateral condensation and GuttaFlow groups. The GuttaFlow group showed the maximum number of voids, 56% (95% CI = 48 - 64), which was significantly higher than those in the lateral condensation, 26% (95% CI= 19 - 34), and Obtura II, 15% (95% CI= 10 - 21) groups.

CONCLUSION

The Obtura II technique utilizing the injection-molded thermoplasticized gutta-percha had better adaptability to the canal walls when compared to the GuttaFlow obturation and lateral condensation techniques.

Three-dimensional helical computed tomographic evaluation of three obturation techniques: In vitro study

AIM

The purpose of this study was to evaluate the adequacy of three obturation techniques namely lateral condensation, EQ Fil (backfill obturation) and thermafil (core carrier obturation) techniques using three-dimensional (3D) helical computed tomography (CT) by volume rendering method.

MATERIALS AND METHODS

Thirty freshly extracted teeth were randomly divided into three groups of 10 teeth each. Biomechanical preparation was done in all the teeth using rotary instruments. All three sets of teeth were placed in helical CT slice scanner and were imaged before obturation. The three sets were then obturated by following methods: Group I: lateral condensation, Group II: EQ Fil (backfill) and Group III: thermafil (core carrier obturation).Volume of the pulp chamber and gutta-percha after obturation were calculated using volume rendering technique and adequacy of the obturation techniques were calculated.

STATISTICAL ANALYSIS USED

One-way ANOVA and Multiple-Range Tukey Test by Tukey-HSD procedure

RESULTS

Mean change in lateral condensation (0.005±0.002) was significantly higher than that of thermafil obturation (0.002±0.001) [P<0.05].

CONCLUSIONS

Conventional lateral condensation technique showed maximal inadequacy of obturation and thermafil obturation technique showed the least inadequacy of obturation when the volume of the specimens were calculated and reconstructed.

A comparative evaluation of gutta-percha filled areas in curved root canals obturated with different techniques

The aim of this study was to compare different obturation techniques in severely curved canals in terms of the percentage of gutta-percha filled area and voids. The obturation times and the incidence of extrusion of filling material were also compared. Curved root canals (curvature, 25-35°) of 48 extracted human teeth were enlarged with Mtwo rotary NiTi instruments and obturated as follows: Group A: 0.04/35 matched-single-cone; Group B: cold lateral compaction with 0.04/35 gutta-percha master cone; Group C: warm vertical compaction; Group D: lateral compaction with standardized gutta-percha master cone. In all groups AHPlus was used as sealer. The teeth were sectioned horizontally at 2, 3, 4, 6 and 8 mm from the apex. The total area of each canal segment was measured and the areas of gutta-percha, sealer and voids were converted to percentages of the total area. Data were subjected to the Kruskal-Wallis and post hoc Dunn test. Obturation times were compared using ANOVA and post hoc Student-Newman-Keuls test. The matched-single-cone obturation (group A) was significantly the fastest method while warm vertical compaction (group C) required significantly more time than all other techniques (p < 0.05). No significant differences were obtained between the groups in terms of percentage of voids at any level (p > 0.05). At all levels, groups B, C, and D produced significantly higher gutta-percha filled areas (p < 0.05) and lower sealer-filled areas (p < 0.05) than group A. No significant differences were found between groups B, C, and D (p > 0.05) regarding gutta-percha and sealer-filled areas. Within the limitations of the in vitro study, it can be concluded that lateral compaction of greater taper gutta-percha cones is a fast and efficient method for obturation of curved canals.

Sealer area associated with cold lateral condensation of gutta-percha and warm coated carrier filling systems in canals prepared with various rotary NiTi systems

AIM

To compare the area of sealer surrounding root fillings completed by two coated carrier systems (Thermafil Obturator and System GT Obturator) and the cold lateral compaction technique, following root canal preparation with two different NiTi rotary systems (Profile ISO and System GT).

METHODOLOGY

Sixty extracted human mandibular premolars were instrumented with ProFile ISO 0.06 taper and System GT instruments (n = 30 each). The teeth were divided into four subgroups (n = 15) for filling as following: group 1: ProFile + Thermafil Obturator, group 2: ProFile + Cold Lateral Compaction, group 3: System GT + GT Obturator, and group 4: System GT + Cold Lateral Compaction. In all groups the canals were prepared to a final size of 40, 0.06 taper in accordance with the manufacturer's instructions and Topseal was used as a sealer. Horizontal sections were obtained every 1 mm up to 12 mm from the apical foramen. Sections were digitally photographed under a stereomicroscope and the images were transferred to an IBM-compatible PC for image analysis. The cross-sectional area of the root canal and the area filled by sealer were calculated for each section and compared statistically both at all levels and by grouping the data as apical, middle and coronal segments; using the Kruskal-Wallis test with Bonferroni correction and chi-square tests (P = 0.05).

RESULTS

In the apical third (1-4 mm), the GT Obturator (group 3) had significantly less area of sealer (P < 0.05), while the difference between groups 1 and 2 was not significant (P > 0.05). For the middle and coronal thirds, both coated-carrier systems had significantly less area of sealer compared with their laterally compacted counterparts (P < 0.05).

CONCLUSIONS

With the combined use of ProFile + Thermafil Obturator and System GT + GT Obturator, significantly less area of sealer occurred than that achieved with both NiTi preparation systems followed by cold lateral compaction.

Determination of root canal curvatures before and after canal preparation (part II): A method based on numeric calculus

The aim of this paper is to present a new method based on numeric calculus to provide data on any type of root canal curvature at any point of the long axis of the canal. Twenty severely curved, simulated root canals were prepared with rotary FlexMaster and Profile instruments in the crown-down technique and manually in the step-back technique. The inner and outer curvatures were registered in a system of coordinates before and after preparation in increments of 0.5 mm. Using an equalising function, the curvatures were first represented in graphic and algebraic form. The maximum and the mean curvature as well as the length of the arc from the apical foramen to the point of maximum curvature were determined mathematically. An increase in maximum curvature was registered for all four shaping systems investigated. The radius of the inner curvature decreased by 0.5-1.2 mm in the manual systems as a result of the preparation. The Profile system displayed the smallest changes in radius (-0.9 mm) even with the outer curvature, and manual preparation with stainless steel files the most pronounced change (-1.8 mm). The point of maximum curvature at the inner curvature was displaced by 1.6 mm to the apical foramen through manual preparation with Ni-Ti files. At the outer curvature, the maximum displacement (1.8 mm) recorded was also the result of preparation with Ni-Ti hand files, while a displacement of only 0.3 mm to the apical foramen was recorded with the other systems. The method offers a means of determining curvatures precisely without random specification of reference points. The method is also capable of registering only minor changes in curvature in the two-dimensional long axis of the canal.

Comparative study of two canal obturation techniques by image analysis and EDS microanalysis

AIM

The aim of this in vitro study was to compare the marginal adaptation achieved by two obturation techniques (lateral condensation and Thermafil) using human teeth prepared by continuous rotation with the HERO 642(R) system.

METHOD

The percentages of gaps and sealer on the root canal surface were determined by analysing the images of 12 sections per tooth. Tubule sealer penetration was assessed by backscattered scanning electron microscopy and energy dispersive spectrometry microanalysis.

RESULTS

The Thermafil obturation technique resulted in virtually no gaps and very low amounts of sealer on the root surface, unlike the lateral condensation technique. Tubule sealer penetration occurred with both techniques, but was deeper, especially in the mid and apical zones, with the lateral condensation technique.

Outcome of root canal treatment using Thermafil and cold lateral condensation filling techniques

AIM

To evaluate the outcome of root canal treatment (RCT) using either Thermafil (TF) or lateral condensation (LC) as filling technique, and to compare the time required for the treatment when either filling technique was used.

METHODOLOGY

This study involved all patients attending the dental clinic of a university in Hong Kong who required primary, nonsurgical RCT. It was a prospective clinical trial involving 85 teeth in 79 patients aged 15-69 years (mean 48 +/- 12 years), which required root treatment and finally filling with either TF or LC by one of four dentists following a standard treatment protocol. The time used for the entire course of treatment was recorded. The treated teeth were examined both clinically and radiographically 3 years after the treatment by a single examiner who did not know their group assignment.

RESULTS

A total of 85 teeth from 79 patients were included in this study and 71 teeth from 64 patients were examined after 3 years. Thirty-four teeth were root filled with LC and 37 with TF. The overall attrition rate was 16% (14/85). There were 22 incisors and canines, 21 premolars and 28 molars for evaluation. Post-treatment disease with clinical symptoms and/or radiographic radiolucency was observed in seven teeth (21%) of the LC group and in seven teeth (19%) in the TF group. There was no statistically significant difference (P > 0.05) for the presence of disease between the two groups. It was found that irrespective of the filling method used, teeth later restored with extracoronal restorations had a lower association with disease than those receiving intracoronal restorations (7% vs. 30%; P = 0.037). RCT took, on average, 20 min less when TF was used for filling compared with LC (98 min vs. 78 min, P = 0.003).

CONCLUSIONS

Using TF or LC in the filling of root canals did not result in significant difference in the clinical treatment outcome. TF consumed significantly less time than LC. The type of postendodontic restoration had a significant association with the presence of post-treatment disease.

The adoption of new endodontic technology amongst Danish general dental practitioners

AIM

To assess the adoption of new endodontic technology in a population of Danish practitioners.

METHODOLOGY

Members of the Copenhagen Dental Association (n = 1156) were approached with a questionnaire concerning the frequency of various endodontic procedures. Three options were available: often, occasionally and never. Responses were anonymous. The statistical analyses were performed as studies of association in two- or three-way contingency tables, and with Goodman-Kruskal's gamma-coefficient as the basic tool chosen.

RESULTS

Only data from general practitioners (GPs) in private practice were analysed (n = 956). The response rate was 72%. NiTi hand instruments were often used to negotiate canals by 18%, whilst 10% often used NiTi rotary systems. Electronic apex locators were often employed by 15%. Nineteen per cent reported that warm gutta-percha was often used. A majority (53%) often spend two sessions to instrument a molar, and 20% often needed three or more sessions to finish the shaping phase. To complete a treatment of a nonvital case most practitioners reported to use at least three appointments. Only 4% frequently applied rubber dam.

CONCLUSIONS

The adoption of new endodontic technology is at an early stage amongst Danish GPs. A new revised remuneration system might influence the rate of adoption, allowing the practitioners to act more rationally and produce a higher frequency of good-quality root fillings. Progress towards high quality endodontics might be hindered by the nonuse of rubber dam.

Ultrasonic condensation of gutta-percha: the effect of power setting and activation time on temperature rise at the root surface - an in vitro study

AIM

To determine the effect of power setting and duration of activation on the temperature rise at the root surface during root canal obturation by ultrasonic condensation of gutta-percha.

METHODOLOGY

A human maxillary canine was used in an in vitro split tooth model to allow repeated obturation of the root canal system using an ultrasonic device to thermocompact gutta-percha. Combinations of power settings (1, 3 and 5) and durations of activation (4, 10 and 15 s) were used to test their effect on temperature rise at the root surface using eight K-type thermocouples at the mid-root and apical levels. At the end of each obturation, the tooth was disassembled to remove the gutta-percha in preparation for the next obturation (n = 10 for each combination). Multiple linear regression models were used to investigate the effects of power setting, duration of activation and thermocouple location on the maximum temperature rise recorded.

RESULTS

Only one combination of power setting (5) and duration of activation (15 s) resulted in temperature rise in excess of 10 degrees C. The maximum temperature rise at the mid-root level was significantly (P < 0.001) greater than that recorded apically. It is also significantly affected by the combination of power setting and duration of activation.

CONCLUSIONS

Temperature rises at the root surface during ultrasonic condensation of gutta-percha in excess of 10 degrees C were evident in only one combination of power (5) and time (15 s) settings at the mid-root level.

Apical Extrusion of Thermoplasticized Obturating Material in Canals Instrumented with Profile 0.06 or Profile GT

The purpose of this in vitro study was to compare the extrusion of thermoplacticized gutta-percha in teeth instrumented with Profile 0.06 or Profile GT, and obturated with Thermafil Plus and Thermafil GT, respectively. A total of 120, extracted, human maxillary central incisors were divided into four equal groups. Group 1 was instrumented with Profile 0.06 and obturated with Thermafil Plus. Group 2 was instrumented with Profile 0.06 and obturated using warm vertical condensation (negative control). Group 3 was instrumented with Profile GT and obturated with Thermafil GT. Group 4 was instrumented with Profile GT and obturated like Group 2 (negative control). Extrusion was graded as present or absent. Results found 9 of 30 extruded for group 1, 1 of 30 for group 2, 15 of 30 for group 3, and 2 of 30 for group 4. The results suggest that, in vitro, Thermafil GT may be more prone to extruding gutta-percha past the apical foramen than Thermafil Plus.

"In vitro" evaluation of the apical sealing of root canals obturated with different techniques

The purpose of this study was to compare the apical sealing of root canals obturated with different techniques. One hundred-six human mandibular incisors were submitted to instrumentation by means of the step-back technique. After instrumentation, one hundred teeth received an impermeable coating on the external surfaces of the crown and root (except for the area nearby the apical foramen). Afterwards, they were divided in five groups containing twenty elements each, according to the obturation technique employed: 1. lateral condensation with Kerr file; 2. continuous wave of condensation technique with System B; 3. thermoplasticized injectable gutta-percha technique with the Ultrafil system; 4. mechanically thermoplasticized gutta-percha with the JS Quick-Fill system and 5. thermoplasticized gutta-percha associated to a master cone with the Microseal system. The six remaining teeth were employed as negative and positive controls. After obturation, the access cavities were sealed and the teeth were immersed in aqueous 2% methylene blue dye for 72 hours at 37ºC. After that, the teeth were longitudinally sectioned and the apical microleakage was evaluated in a stereomicroscope. The Microseal system presented the best apical sealing ability, followed by System B, JS Quick-Fill, Ultrafil and the lateral condensation technique. The statistical analysis of the results demonstrated that: 1. the Microseal system presented an apical sealing similar to System B and better than the other groups; 2. System B presented better apical sealing than the lateral condensation technique, being similar to the other groups; and 3. the lateral condensation, Ultrafil and JS Quick-Fill groups demonstrated similar sealing ability.

Comparison of 6 different gutta-percha techniques (part II): Thermafil, JS Quick-Fill, Soft Core, Microseal, System B, and lateral condensation

OBJECTIVES

In this in vitro study, the core-to-sealer ratios were calculated for 6 different gutta-percha techniques: Thermafil, JS Quick-Fill, Soft Core, Microseal, System B, and lateral condensation. The core consisted of gutta-percha or gutta-percha and carrier.

STUDY DESIGN

The sealer-to-core ratios for the Thermafil, JS Quick-Fill, System B, and lateral condensation techniques were published previously. In this study, the sealer-to-core ratio for Microseal and Soft Core techniques was investigated. For this purpose, 20 teeth filled by using the Soft Core or the Microseal technique were embedded in resin and sectioned horizontally at 1, 2, 3, and 4 mm from the anatomic apex. Photographs were taken of each section, and the total area of the canals filled with core material or sealer was calculated.

RESULTS

Once all results were compiled, it became clear that core techniques (Thermafil, JS Quick-Fill, and Soft Core) produced higher gutta-percha content than the Microseal, System B, and lateral condensation techniques (P <.05). The lateral condensation technique produced the least gutta-percha content (P <.05).

CONCLUSION

Thermafil, JS Quick-Fill, and Soft Core were found to be superior to the Microseal, System B, and lateral condensation techniques in terms of the gutta-percha-to-sealer ratio.

A preliminary analysis of the morphology of lateral canals after root canal filling using a tooth-clearing technique

AIM

This study used a modified tooth-clearing technique to allow observation of accessory canals following filling with a warm gutta-percha technique and one of two endodontic cements.

METHODOLOGY

Ten extracted human maxillary molars with three roots were selected and divided into two equal groups of five teeth. Each group had 15 canals. Root canal preparation was performed with a modified double flared technique; irrigation with 5% NaOCl and lubrication with RC-Prep were used. The canals were then filled with gutta-percha and cement utilizing a warm vertical condensation technique in the apical third followed by thermo-mechanical compaction in the middle and coronal thirds. Pulp Canal Sealer or AH-Plus were used in the experimental groups. The teeth were demineralized with a modified buffered acid solution, cleared in methylsalicylate and examined under a stereomicroscope. Accessory canals were evaluated in the apical, middle and coronal thirds of each root canal and categorized as narrow or wide, following observation on four surfaces. The depth of penetration of gutta-percha and cement into lateral canals was scored using a 5-point system.

RESULTS

Complete transparency of the roots was achieved. Accessory canals were detected in all specimens. In coronal ramifications, gutta-percha filled the empty spaces (coronal thirds, grades 3 and 4: 70.9% in AH-Plus group and 68.8% in Pulp Canal Sealer group). In the apical accessory canals, gutta-percha entered less frequently (apical thirds, grades 3 and 4: 17.9% in the AH-Plus group and 3.2% in the Pulp Canal Sealer group); cement without gutta-percha (grades 1 and 2) was present in 55.5% in the AH-Plus group and 38.7% of the Pulp Canal Sealer group. Analysis showed that AH-Plus cement resulted in significantly greater filling of the apical accessory canals compared to Pulp Canal Sealer.

CONCLUSIONS

The modified tooth-clearing technique allowed observation of fine morphological details in all specimens. Effective gutta-percha filling was evident in most of the wide coronal lateral canals whilst the apical narrow ramifications were often incompletely filled by cement. Overall AH-Plus demonstrated better diffusion into lateral accessory canals compared to Pulp Canal Sealer.

A comparative study of lateral condensation, heat-softened gutta-percha, and a modified master cone heat-softened backfilling technique

AIM

The aim of the study was to compare the quality of root fillings completed by lateral condensation (L), Thermafil (TF), and a new technique using Thermafil for backfilling (BF), with special emphasis on control of overfilling.

METHODOLOGY

Sixty curved canals in plastic blocks were prepared with the ProFile system to size 40/04 taper in the apical half and to 06 taper in the coronal half. The canals were divided into three groups of 20. Apical patency was verified with a size 15 K-file. The canals were then filled using three different techniques: LC (20 canals), TF (20 canals), and BF, where a size 40 master point with sealer was seated prior to the introduction of a size 30 Thermafil point (20 canals). The same resin-based sealer was used on each occasion. The root fillings were assessed using stereo-microscopy for material extrusion, digital radiography for occurrence of voids, and microscopy of sections for voids and thickness of sealer layer.

RESULTS

Extrusion of both gutta-percha and sealer occurred in all 20 canals filled with the TF technique, but only three and five cases of sealer extrusion were detected with LC and BF techniques, respectively. No voids were detected in the TF group, whereas small voids were present in most fillings in the LC and BF groups. The average total length of the voids was less than 1 mm per canal. The thickness of the sealer layer in the middle and apical parts was greater in the LC and BF groups than in the TF group.

CONCLUSIONS

LC and BF techniques resulted in fewer overfills than TF. Voids were absent in TF fillings, whilst small voids were found in the LC and BF groups.

Effect of three different sealers on the sealing ability of both thermafil obturators and cold laterally compacted Gutta-Percha

The purpose of this study was to assess the seal obtained in straight and curved root canals filled with either laterally compacted gutta-percha or Thermafil obturators. Each technique was used in combination with three different sealers (RSA RoekoSeal, AH Plus, AH 26). Thermafil obturators were also used without sealer, resulting in a total of 14 test groups of 16 teeth each. Sixty teeth served as positive or negative controls. Included in the study were 142 extracted teeth with straight and 142 with curved root canals. All canals were enlarged up to size 40. After obturation, all roots were placed in India ink for 48 h and rendered transparent to measure the maximum linear dye penetration. Canals filled with Thermafil obturators had significantly more extrusion of filling material than canals filled by lateral compaction (p < 0.01). Thermafil without sealer showed significantly greater dye penetration compared with all other groups both in straight and in curved canals (p < 0.05). As long as a sealer was used, the seal obturated with Thermafil was equivalent in terms of dye penetration to lateral compaction. There were no statistical differences in the mean apical dye penetration among the three sealers. The differences between the dye penetration in straight and in curved canals were insignificant for all groups (p > 0.05). Under the conditions of this study, Thermafil obturators achieved seals comparable to lateral compaction, as long as a sealer was used.

Comparison of different gutta-percha root filling techniques: Thermafil, Quick-fill, System B, and lateral condensation

OBJECTIVES

In this in vitro study, the core (gutta-percha or gutta-percha and carrier)/sealer ratio and the sealing ability were calculated for 4 different gutta-percha techniques: Thermafil, JS Quick-Fill, System B, and lateral condensation.

STUDY DESIGN

One hundred single-rooted teeth were instrumented and obturated. Forty of the teeth were embedded in resin and sectioned horizontally at 1, 2,3, and 4 mm from the anatomic apex. Photographs were taken of each section, and the total area of the canal filled with core material or sealer was calculated. Sixty of the teeth were kept in wet storage for 90 days, after which the teeth were immersed in 2% methylene blue for 48 hours. The length of dye penetration was measured.

RESULTS

Roots obturated with Thermafil and JS Quick-Fill contained significantly more core material than did those obturated with System B or with lateral condensation. The lateral condensation technique had the lowest core/sealer ratio (P < .05). Roots using Thermafil and Quick-Fill showed significantly less dye leakage than did the lateral condensation technique.

CONCLUSIONS

Through use of these techniques in vitro, Thermafil and JS Quick-Fill with carrier and System B were found to be superior to the lateral condensation technique in terms of core/sealer ratio. Thermafil and Quick-Fill were superior to lateral condensation in terms of dye leakage.

Comparison of lateral condensation and thermomechanically compacted warm alpha-phase gutta-percha with a single cone for obturating curved root canals

OBJECTIVE

To evaluate and compare the sealability and radiographic quality of root fillings in extracted teeth by using lateral condensation of gutta-percha or alpha-phase gutta-percha in conjunction with a single gutta-percha cone.

STUDY DESIGN

A total of 108 single-rooted teeth were divided into 2 groups of 54 teeth based on canal shape. Canals were prepared to a minimum 0.055 taper and enlarged to a size 35 at the working distance. Irrigation was done with 17% EDTA and 2.5% sodium hypochlorite (NaOCl) to remove smear layer. One group was obturated by using cold lateral condensation of gutta-percha; the other group was obturated with thermomechanically compacted alpha-phase gutta-percha and a single cone of gutta-percha. Apical extrusion of sealer or gutta-percha was recorded. Sealability of each technique was assessed by dye penetration. The radiographic quality of obturation was also determined.

RESULTS

Root canals filled with alpha-phase gutta-percha and a single cone had significantly more extrusion of sealer than canals filled by lateral condensation. Lateral condensation achieved significantly better scores for radiographic quality. There was no significant difference between the 2 filling techniques in terms of apical or coronal leakage.

CONCLUSIONS

Thermomechanically condensed alpha-phase gutta-percha used in conjunction with a single gutta-percha cone had poorer radiographic quality than laterally condensed gutta-percha.

Comparison of cold lateral condensation and a warm multiphase gutta-percha technique for obturating curved root canals

AIM

The aim of this project was to evaluate and compare the radiographic quality and sealability of root fillings in extracted human teeth using lateral condensation of gutta-percha or multiphase gutta-percha obturation (Alphaseal).

METHODOLOGY

A total of 108 freshly extracted human, mature single-rooted teeth were divided into two identical groups of 54 teeth on the basis of root canal shape. The canals were prepared to a minimum 0.055 taper and enlarged to size 35 at the apex. All root canals were flushed with 17% EDTA solution and 2.5% NaOCl to remove the dentinal smear layer. The canals of one group were obturated using cold lateral condensation of gutta-percha and the canals of the other group were filled using a warm multiphase gutta-percha obturation technique. The extrusion of sealer and/or gutta-percha through the apex of the teeth was recorded using a simple yes/no scheme. The sealability of each technique was assessed by a dye penetration method. The radiographic quality of obturation was determined for each canal using a four-point scale.

RESULTS

Root canals filled by multiphase obturation had significantly more extrusion of sealer (P < 0.001) and gutta-percha (P < 0.001) than canals filled by lateral condensation. Canals filled by multiphase gutta-percha obturation had significantly less apical dye leakage than those obturated by lateral condensation (P < 0.05). Lateral condensation achieved significantly better scores for radiographic quality than multiphase obturation from the bucco-lingual view (P < 0.01).

CONCLUSIONS

Under laboratory conditions multiphase gutta-percha had better sealability but poorer radiographic quality than lateral condensation.

Advances in endodontics

Progress in diagnosis, prevention of diseases, treatment of exposed pulp, root canal treatment, retreatment and surgery is reported. Contemporary biological research techniques could set the foundation for a more rational approach to treatment. Pulp inflammation may be prevented by inhibiting bacteria from colonising dentine surfaces. Specific factors could be synthesised to stimulate normal dentine deposition over pulp exposures. Significant improvements have been made in instruments and techniques available for root canal treatment and surgery but there is no clinical evidence that they improve periapical healing.