Abfraction, Abrasion, Biocorrosion, and the Enigma of Noncarious Cervical Lesions: A 20-Year Perspective

Association between non-carious cervical lesions, dentin hypersensitivity and anxiety in young adults: A cross-sectional study

OBJECTIVES

To investigate the prevalence and factors associated with dentin hypersensitivity (DH) and non-carious cervical lesions (NCCLs).

METHODS

The analytical cross-sectional study included 157 participants aged between 18 and 45 years, who were clinically examined and answered a questionnaire related to their lifestyle and daily habits (diet, parafunctional habits, temporomandibular disorders, general and oral health) and the Beck Anxiety Inventory. A descriptive analysis of the prevalence of DH and NCCL was performed, both at the individual level and considering the distribution among the teeth. Poisson regression models were used to investigate factors associated with hypersensitivity.

RESULTS

The prevalence of DH and NCCL was 84.7 % and 49.7 %, respectively. The use of whitening toothpaste and brushing teeth immediately after meals were related to the presence of at least one tooth with DH, while the NCCL and anxiety factors were related to the presence of DH in both at least one tooth and more than four teeth per individual. On the other hand, individuals who used soft and extra soft toothbrushes, as well as those who had knowledge about oral health, had a lower prevalence of DH.

CONCLUSIONS

DH and NCCL have a high prevalence in the population and are associated with each other and with the individual's lifestyle and habits.

CLINICAL SIGNIFICANCE

Individuals with signs of anxiety had a higher prevalence of DH, while individuals with knowledge about the etiological factors had a lower prevalence of the disease.

Clinical performance of an ormocer-based single-shade resin composite for the restoration of non-carious cervical lesions: 18-month randomized clinical trial

OBJECTIVE

This double-blind, split-mouth, randomized equivalence clinical trial aimed to evaluate the 18-month clinical performance of an ormocer-based single-shade resin composite compared with an ormocer-based multi-shade resin composite in non-carious cervical lesions (NCCLs).

METHODS

One hundred and twenty restorations were performed on NCCLs with two restorative materials (n = 60): Admira Fusion X-tra resin composite (ormocer-based single-shade), and Admira Fusion resin composite (ormocer-based multi-shade). After rubber dam isolation, a universal adhesive was applied in the selective enamel etching strategy. For both groups, restorations were inserted incrementally and light-cured. The restorations were clinically evaluated at 6, 12, and 18 months according to the updated FDI (World Dental Federation) criteria. Statistical analysis was performed using Friedman repeated measures ANOVA by rank and Mann-Whitney test for pairwise significance (α = 0.05).

RESULTS

All restorations were evaluated after 18 months, and nine restorations were lost. Fracture of the material and retention rates (95 % confidence interval [CI]) were 93 % (84-97 CI) for the ormocer-based single-shade and 91 % (82-96 CI) for the ormocer-based multi-shade, with no statistical differences between them (p > 0.05). The absolute risk (95 % CI) was 0.8 (0.2 to 3.1).

CONCLUSIONS

The updated FDI evaluation criteria showed equivalent results for ormocer-based single-shade and ormocer-based multi-shade after 18 months.

CLINICAL SIGNIFICANCE

Using an ormocer-based single-shade resin composite in NCCLs is advisable due to its convenience, ease of application, and lower cost compared to ormocer-based multi-shade composites without compromising clinical performance.

Influence of different viscosity and chemical composition of flowable composite resins: A 48-month split-mouth double-blind randomized clinical trial

OBJECTIVES

To evaluate the clinical performance of two flowable composites based on methacrylate and one based on ormocer in treating non-carious cervical lesions (NCCLs) after 48-month evaluation in a split-mouth double-blind clinical study design.

METHODS

A total of 183 restorations were performed on NCCLs using a universal adhesive system (Futurabond U, Voco GmbH) with selective enamel etching on 27 participants: two participants received twelve restorations each, three received nine restorations each, and 22 participants received six restorations each. Three different flowable composites were employed (n = 61): a low-viscosity methacrylate-based composite (GrandioSO Flow, LVM), a high-viscosity methacrylate-based composite (GrandioSO Heavy Flow, HVM), and an ormocer-based flowable composite (Admira Fusion Flow, ORM). All restorations were evaluated using FDI and USPHS criteria after 48 months. Statistical analysis was conducted using Kaplan-Meier Survival analysis and Kruskal-Wallis analysis of variance rank (α = 0.05).

RESULTS

After 48 months, 17 restorations were lost: LVM 6, HVM 9, ORM 2. The retention rates (95 % confidence interval) were 89.4 % for LVM, 80.4 % for HVM, and 95.6 % for ORM, with a significant difference between HVM vs. LVM and HVM vs. ORM (p < 0.05). Minor defects were observed in 30 restorations for marginal staining criteria (LVM 12, HVM 10, ORM 8) and in 71 restorations for marginal adaptation criteria (LVM 24, HVM 20, ORM 27) without significant difference between groups (p > 0.05). No restorations showed postoperative sensitivity or recurrence of caries.

SIGNIFICANCE

The increased viscosity of flowable composites could reduce the clinical longevity in NCCLs after 48 months. Ormocer-based and low-viscosity methacrylate-based flowable composites showed a successful clinical performance in NCCLs after 48 months.

Morphological characteristics of non-carious cervical lesions. A systematic review

OBJECTIVES

This systematic review assessed the morphological characteristics of non-carious cervical lesions (NCCL), among clinical and ex-vivo studies assessed by observational and imaging methods.

DESIGN

The search strategy was conducted on four online databases (MEDLINE, Embase, Scopus and Web of Science) and grey literature (Google Scholar and OpenGrey). The study selection was performed by three reviewers from March to September (2023). The eligibility criteria were established according to the PICO strategy and included NCCL, morphological characteristics and clinical and ex-vivo study designs. The data extraction considered general data that identifies the study, evaluation method, parameter to assess the outcome and the main results for each study. The risk of bias was evaluated using Joanna Briggs Institute critical appraisal tool, and a personalized tool.

RESULTS

The search resulted in 252 studies. A total of 14 studies were included. Prevalence of NCCLs ranged from 3.5 %to 77.78 % with a higher presence in premolars. Common characteristics were wear facets, occluded tubules or cracks, occlusal stress, scratch marks, dimples and craters, structure loss, and dentin sclerosis, which appear more often on buccal surface and were generally classified as wedge-shaped, saucer-shaped. Etiological hypothesis was mainly related to multifactorial factors. In most of the studies, the risk of bias was classified as high.

CONCLUSIONS

The morphological characteristics of NCCL showed a wide range of descriptions regarding appearance, prevalence, lesion-related measures, and macro and microscopic descriptions.

Salivary factors associated with noncarious cervical lesions: A systematic review

OBJECTIVE

This study aimed to carry out a systematic review of observational studies searching the association between salivary factors (amount and quality of saliva) and noncarious cervical lesions (NCCL) in individuals with permanent dentition.

DESIGN

Cross-sectional, case-control, and cohort studies performed in humans with permanent dentition (population) and considering noncarious cervical lesions (outcome) in association with salivary characteristics (exposure) were included. PubMed, Web of Science, Cochrane, LILACS/BBO, Scopus, Embase, IBCT, NICE, OpenGrey, and Google Scholar were searched, with no language or date restrictions. Of 6561 potentially eligible studies, 142 were selected for full-text analysis. Three reviewers independently selected the studies, performed data extraction, and quality analysis through the Newcastle-Ottawa Scale.

RESULTS

Finally, ten references were included in the review, four case-control and six cross-sectional studies. Several salivary parameters were evaluated. Some parameters were considered associated with the presence of noncarious cervical lesions: salivary buffering capacity, salivary pH, citric acid, and calcium and potassium levels. The methodological quality varied across studies, with high heterogeneity among them.

CONCLUSIONS

Some associations between saliva and NCCL suggesting protective factors and others risk factors were found. However, the evidence is sparse and comes from a few studies with great heterogeneity. New scientific evidence, with standardized methods, should be encouraged. Understanding salivary parameters that influence the occurrence of NCCL is important to guide dentists in relation to etiological factors that could potentially be neglected. The results may help in the development of new and early diagnostic methods and treatments for noncarious cervical lesions.

Hard drugs use and tooth wear: a scoping review

OBJECTIVES

This study aims to map evidence on the relationship between hard drug use and dental wear. The scoping review is guided by the question: What is the relationship between hard drug consumption and dental wear?

MATERIALS AND METHODS

Adhering to PRISMA-ScR guidelines, searches were conducted across PubMed, Embase, and four databases in March 2024. Inclusion criteria included studies investigating the association between hard drug use and dental wear, regardless of publication date or language. Data were presented through narrative exposition, tables, and a conceptual framework.

RESULTS

Twenty-eight studies (four case-control, three cross-sectional, five case reports, and sixteen literature reviews) were included. Among case-control studies, 75% observed an association between drug use and dental erosion; however, no cross-sectional studies demonstrated this association. Despite questionable quality, reviews established connections between drug use and dental erosion. Studies aimed to elucidate potential causes for dental erosion.

CONCLUSIONS

Analysis suggests a potential link between hard drug use and dental wear, though indirect. Factors like bruxism and reduced salivary pH may contribute to dental wear among drug users. Further investigation through primary studies exploring this relationship is necessary.

CLINICAL RELEVANCE

Dentists should focus not only on clinical characteristics of dental wear but also on mediating factors such as bruxism and decreased salivary pH associated with drug use. This holistic approach allows for a deeper understanding of dental wear mechanisms, enabling targeted preventive and therapeutic interventions.

A depth-resolved quantitative evaluation method for non-carious cervical lesions treatment with optical coherence tomography

OBJECTIVES

The aim of this study is prognostic assessment of surface smoothness and the presence of internal bubbles after treatment of non-cancerous cervical lesions (NCCLs) using optical coherence tomography (OCT).

METHODS

After treatment with NCCLs, cross-sectional images of the lesion parts of the sample were non-invasively acquired and analyzed. The surface smoothness between tooth and resin, resin and cemento-enamel junction, and the presence bubble inside resin was confirmed. In addition, using an algorithm that distinguishes between resin and dental structure based on OCT cross-sectional images, we quantitatively analyzed the amount of resin used in treating NCCLs and acquired 3D images.

RESULTS

The inner structure of the resin in each sample was checked, and the presence of bubbles was confirmed. In addition, the resin sections were separated from the tomographic images acquired by OCT to visualize 3D images. The volume of resin used in the treatment part of each NCCLs samples was quantitatively analyzed as 3.7216 ∼ 14.889 mm3.

CONCLUSIONS

OCT is able to measure not only the surface abrasion provided by existing intraoral scanner, but also the size and depth location of interal bubbles, which is distinctive advantage of our method. Based on our results, OCT is a significant tool for qualitative and quantitative analysis of dental NCCLs treatment before and after treatment.

CLINICAL SIGNIFICANCE

The study used OCT, a non-destructive diagnostic, to reveal the structure of the resin and the location and size of bubbles after NCCLs treatment. These findings could be golden standard in determining the prognosis of NCCLs treatment.

Single-session associative protocol for dentin hypersensitivity management: a 1-year randomized, blinded clinical study

Objectives

This study aimed to establish a single-session associative protocol for non-restorative management of dentin hypersensitivity (DH).

Materials and Methods

Twenty-four individuals with DH and a minimum sensitivity level of 4 on the visual analog scale (VAS) were selected. The study was conducted in a split-mouth design, with each participant (n = 20) having at least 1 affected tooth in all quadrants. The management protocols consisted of control group: universal adhesive, Neural Desensitizing Protocol group: 5% potassium nitrate, Mixed Desensitizing Protocol (PAM) group: 5% sodium fluoride and 5% potassium nitrate, Remineralizing Desensitizing Protocol (PDR) group: surface-partially reacted glass technology photopolymerizable varnish. Evaluations were performed immediately after application, at 1 week, 1 month, 2 months, and 12 months using the VAS sensitivity test.

Results

The scores were subjected to statistical analysis using the Friedman test (p < 0.05), Durbin-Conover test (p < 0.05), and Wilcoxon test (p < 0.05). At the 12-month evaluation, all groups showed statistically significant differences compared to the initial assessment. For the evaluation after 12 months, there was a statistically significant difference between the PAM group, the control group, and the PDR group.

Conclusions

It can be concluded that all groups were effective in controlling DH, but there were significant results in the control group and PDR group. The clinical relevance of this study is to demonstrate that the application of single-session desensitizing protocols can be effective in controlling DH for up to 12 months.

Trial Registration

Brazilian Clinical Trials Registry Identifier: RBR-4r63d7s.

Description of a new laboratory evaluation method of interdental brush abrasion as a clinical hazard

OBJECTIVES

To simulate the abrasive potential of an interdental brush when applied with toothpastes and prophylactic gels/solutions in a novel laboratory brushing simulation set-up.

METHODS

A brushing device was customized to treat dentin samples mimicking a simplified interdental space with an interdental brush (ISO 2). The brushing, that is, 7200 strokes for 1 h, was performed with artificial saliva (control), a povidone-iodine solution, and slurries of chlorhexidine and fluoride gels as well as three toothpastes with different RDA values ranging from 29 to 100, respectively. The loss of dentin was profilometrically assessed and compared with ANOVA and Fishers LSD.

RESULTS

While artificial saliva as control, the solution and the gel slurries showed no measurable dentin loss, toothpastes resulted in a measurable linear surface damage with respect to the actual intrinsic RDA values and ranged from 12.6 to 26.5 μm (p < 0.001).

CONCLUSIONS

Any interdental cleaning product should be tailored and carefully instructed. Any over- and misuse should be avoided, which applies especially to the use of interdental brushes in combination with abrasive toothpastes.

Objective assessment of simulated non-carious cervical lesion by tridimensional digital scanning - An in vitro study

OBJECTIVE

Clinical assessment of progression of non-carious cervical lesions (NCCLs) is currently based on subjective methods. We hypothesize that 3D digital intraoral scanners (IOS) can provide quantitative outcomes for objective measuring and monitoring of NCCLs. This in vitro study verified the reliability of IOS to monitor dental structure loss of simulated NCCLs, in comparison to a reference bench-top 3D optical profilometer (BTS).

METHODS

NCCLs of different severity levels (early, moderate, or severe, n = 150) were simulated in a preceding study. Impressions of the lesions were taken and scanned with both BTS (ProScan; Scantron) and IOS (TRIOS4; 3Shape). Generated 3D images were analyzed for volumetric tooth loss (mm3) by superimposition followed by subtraction analysis. ProForm (Scantron) and WearCompare (Leeds Digital Dentistry) software were used in association to BTS and IOS, respectively. Agreement was assessed using intraclass correlation coefficient (ICC, alpha=0.05) and Bland-Altman plots.

RESULTS

ICC (confidence interval at 95 %) between IOS and BTS for all data combined was 0.962 (0.942-0.973), showing excellent reliability. Subset analyses showed that NCCLs with lower volume loss (early- and moderate-stage lesions) resulted in moderate ICCs, whereas severe lesions showed excellent ICC. Bland-Altman plots demonstrated general good agreement, with narrower limits for early stage-lesions.

CONCLUSION

IOS data demonstrated good agreement to BTS, when measuring tooth structure loss in simulated NCCLs, with particularly higher ICC in more severe lesions. Considering the accessibility and ease-of-use, IOS showed to be a good alternative for the objective assessment of NCCLs in vitro.

CLINICAL SIGNIFICANCE

3D intraoral scanners' accessibility and objectivity make them potentially valuable tools for assessing and monitoring NCCLs.

Noncarious cervical lesions: Response from a 25-year clinical follow-up study

STATEMENT OF PROBLEM

The etiology and diagnosis of noncarious cervical lesions (NCCLs) remain poorly understood.

PURPOSE

The purpose of this clinical study was to examine NCCL progression in an existing group of participants, establish the incidence of new NCCLs in a 25-year follow-up study, and relate them to possible risk factors, including occlusal factors.

MATERIAL AND METHODS

Thirty-three participants who had completed a questionnaire about their habits, diet, and personal information were evaluated in this observational retrospective study. Impressions were made, and casts from 3 time periods (Phase I in 1996, Phase II in 1999, and Phase III in 2021) were scanned to obtain digital casts. The casts were then evaluated in a 3-dimensional analysis software program (Geomagic Control; 3D Systems) to establish digital comparisons between NCCLs and occlusal wear. Furthermore, data from an occlusal analysis device (T-Scan; Tekscan) collected in Phase I was used to analyze occlusal interferences relating to the progression of NCCLs. The statistical analysis applied nonparametric tests, followed by the assessment of the association between NCCLs and risk factors, including occlusal wear, through binary logistic regression (α=.05).

RESULTS

At the end of Phase III, 7 new individuals with NCCLs were detected compared with Phase II. The median percentage progression of NCCLs per participant was 0.0% in Phase I, 7.1% in Phase II, and 35.7% in Phase III (P<.005). Occlusal wear in Phase I was associated with 5.02 times the occurrence of NCCLs in Phase III; occlusal wear in Phase II was associated with 4.73 times the occurrence of NCCLs in Phase III; and occlusal wear in Phase III was associated with 1.94 times the occurrence of NCCLs in Phase III (P<.001). Occlusal interference in border movements of the mandible was associated with a 3.55 times greater chance of presenting NCCLs in Phase III (P<.001). Additionally, statistically significant risk factors for the presence of NCCLs in Phase III were an acidic diet (P=.043) and alcohol consumption (P=.021).

CONCLUSIONS

The 25-year data showed an association between NCCLs and specific risk factors, including occlusal wear and occlusal interferences.

Living cellular constructs for keratinized tissue augmentation: A 13-year follow-up from a split-mouth randomized, controlled, clinical trial

BACKGROUND

A 13-year follow-up was conducted of a short-term investigation of the use of living cellular construct (LCC) versus free gingival graft (FGG) for keratinized tissue width (KTW) augmentation in natural dentition, to evaluate the long-term outcomes and assess the changes occurring since the end of the original 6-month study.

METHODS

Twenty-four subjects out of the original 29 enrolled participants were available at the 13-year follow-up. The primary endpoint was the number of sites demonstrating stable clinical outcomes from 6 months to 13 years (defined as KTW gain, stability, or ≤0.5 mm of KTW loss, together with reduction, stability, or increase of probing depth, and recession depth [REC] ≤0.5 mm). Secondary outcomes included the assessment of KTW, attached gingiva width (AGW), REC, clinical attachment level, esthetics, and patient-reported outcomes at the 13-year visit, assessing the changes from baseline to 6 months.

RESULTS

Nine sites per group (42.9%) were found to have maintained stable (≤0.5 mm or improved) clinical outcomes from 6 months to 13 years. No significant differences were observed for the clinical parameters between LCC and FGG from 6 months to 13 years. However, the longitudinal mixed model analysis showed that FGG delivered significantly better clinical outcomes over 13 years (p < 0.01). LCC-treated sites exhibited superior esthetic outcomes compared to FGG-treated sites at 6 months and 13 years (p < 0.01). Patient-evaluated esthetics were significantly higher for LCC over FGG (p < 0.01). Patient overall treatment preference was also in favor of LCC (p < 0.01).

CONCLUSIONS

A similar stability of the treatment outcomes from 6 months to 13 years was found for LCC- and FGG-treated sites, with both approaches shown to be effective in augmenting KTW and AGW. However, superior clinical outcomes were found for FGG over 13 years, while LCC was associated with better esthetics and patient-reported outcomes than FGG.

Noncarious cervical lesions in the aging population analyzed through digital scanning: occlusal risk factors, dimensions, and morphology

OBJECTIVES

To evaluate noncarious cervical lesions (NCCL) in older adults by analyzing each lesion's morphology, dimension, and occlusal risk factors using intraoral scanning and clinical evaluation.

MATERIALS AND METHODS

Individuals over 60 treated at the School of Dentistry in Minas Gerais, Brazil, were invited to participate in this cross-sectional study. We clinically evaluated 1245 teeth for the presence of NCCL and dentin hypersensitivity (DH) in 53 individuals. Three-dimensional models were obtained using Omnicam, and occlusal risk factors were evaluated through the presence of wear facets, intense occlusal contacts, and interferences. The 3Shape 3DViewer software was used to classify NCCL morphology and to measure their height. NCCL depth, width, and area measurements were determined using ImageJ. Descriptive analyses were performed. The Kolmogorov-Smirnov test showed that quantitative data exhibited non-normal distribution. For bivariate analyses of quantitative data, the Mann-Whitney test was employed. The results were reported with mean, standard deviation, median, minimum, and maximum. For bivariate analyses of categorical data, the Pearson chi-square test was used. The results were reported with frequencies (counts) and percentages. A regression model evaluating the association between occlusal risk factors and the absence/presence of NCCL was built.

RESULTS

Most participants were female (58.5%), with a mean age of 66. The frequency of NCCL was 28.27%, corresponding to 352 teeth. Of these, 68.18% exhibited saucer morphology and 31.82% wedge-shaped morphology. The frequency of DH was 13.92% in teeth with NCCL. Saucer NCCL exhibited significantly greater height (p = 0.02), while wedge-shaped lesions showed greater depth (p < 0.001). Also, teeth with NCCL had a higher proportion of wear facets (66.8%; p < 0.001), intense occlusal contacts (39.8%; p = 0.008), and occlusal interferences (21.9%; p = 0.05). The regression model showed that teeth with wear facets were 1.50 times more likely to exhibit NCCL than teeth without wear facets (p < 0.001). Teeth with intense occlusal contact were 1.22 times more likely to exhibit NCCL than teeth without intense occlusal contact (p = 0.031).

CONCLUSIONS

NCCL is a common dental condition in the older adults evaluated in this study. Wedge-shaped NCCL exhibited greater depth, while saucer NCCL had more expressive height. Occlusal risk factors may represent a crucial mechanism for the occurrence of NCCL in this population.

CLINICAL RELEVANCE

Understanding the mechanisms involved in developing NCCL is helpful in diagnostic and preventive practices. The study showed the importance of dental occlusion and characteristics of different NCCL morphologies that help the clinician in decision-making.

Investigating the etiology of non-carious cervical lesions: Novel µCT analysis

OBJECTIVES

The etiology of non-carious cervical lesions (NCCLs) is not fully understood, limiting treatment and prevention. Our aim was to evaluate the effect of mechanical loading and acid exposure on the cervical tooth region using a random spectrum loading model that simulates the nature of oral mastication.

METHODS

Thirty extracted human premolars were divided into three experimental groups: 1) unloaded teeth immersed in acid (erosion group: Er), 2) loaded teeth immersed in acid (erosion with spectrum loading group: Er-SL), and 3) loaded teeth immersed in distilled water (spectrum loading group: SL). Random spectrum loading with loads ranging from 100 to 500 N was performed. All teeth were scanned using micro-CT. A novel 3D analysis was developed to evaluate the circumferential cervical tissue loss and regions under tension and compression. For parametric and non-parametric comparisons, one-way ANOVA with Tukey post-hoc tests and Kruskal-Wallis with Bonferroni post-hoc tests were used.

RESULTS

A significant difference was observed in the circumferential volumetric loss, with the Er-SL exhibiting the greatest volume loss (p < 0.001). Moreover, in the loaded groups (Er-SL and SL), regions subjected to tension showed significantly greater loss (p < 0.001, p = 0.007) compared with regions subjected to compression.

CONCLUSIONS

The novel high-resolution micro-CT analysis provided new insights into the etiology of NCCLs. The results suggested that the cumulative effect of mechanical loading and acid exposure may play a major role in NCCL formation.

CLINICAL SIGNIFICANCE

This study investigates the etiology of NCCLs by examining the combined effects of occlusal loads and acid exposure on cervical tissue loss. Understanding the pathogenesis of NCCLs paves the way for the development of improved preventative measures and treatment strategies to prevent tooth structure degradation.

A qualitative analysis of dentists' understanding and management of non-carious cervical lesions (NCCL)

INTRODUCTION

Non-carious cervical lesions (NCCLs) are considered to have a multi-factorial aetiology and their management is affected by a range of variables perhaps most importantly clinical judgement. The aim of this study was to elicit information from practicing dentists, using interviews, to explore their understanding of NCCL aetiology, the decision-making criteria of when to restore, and the restorative techniques used to restore NCCLs. This may help identify gaps or anomalies in our understanding to inform future research and clinical practice for the management of NCCLs.

METHODS

An interview guide was developed from a literature search which formed 2 domains framed around understanding and management of NCCLs based on: understanding of diagnosis and aetiology, and factors affecting decision making for management. Practicing dentists with more than 10 years of experience were purposively recruited to conduct in-depth, semi-structured interviews. Fifteen interviews were audio recorded and transcribed verbatim. A thematic content analysis was conducted and the results analysed.

RESULTS

From the thematic analysis, 2 domains were identified. In the domain of "diagnosis and aetiology", while participants have similar understanding and methods of diagnosing NCCL, most stated NCCLs in a patient were caused by a "main aetiology" such as "abrasion", "abfraction" while few described the inter-relationship of these aetiological factors. In the domain of "factors affecting decision making". "Patient reported symptoms" and "lesion dimension" were the main factors that affected participants' decision to provide restorative or non-restorative management. However, a "restorative threshold" was not able to be identified.

CONCLUSION

There was notable variety in participants' understanding of the aetiology, management, and treatment of NCCLs, particularly the restorative threshold of when to treat.

CLINICAL SIGNIFICANCE

The variability demonstrates the need to have a clearer understanding of the key elements that affect the management of NCCLs and better information to support the decision of when to treat.

Five-year clinical evaluation of universal adhesive applied following different bonding techniques: A randomized multicenter clinical trial

OBJECTIVES

To evaluate the clinical performance of a universal adhesive system (Futurabond U, Voco) when applied following different adhesive strategies in non-carious cervical lesions (NCCLs) after 5 years.

METHODS

Fifty participants were included. Futurabond U (Voco) was applied in NCCLs using four adhesive strategies (n = 50 each): only self-etch (SE); selective enamel etching + self-etch (SET + SE); etch-and-rinse with dry dentin (ERD); and etch-and-rinse with wet dentin (ERW). All cavities were restored with Admira Fusion composite resin (Voco). Restorations were evaluated after 1, 3, and 5 years using the World Federation criteria (FDI) and the modified United States Public Health Service (USPHS) criteria.

RESULTS

After 5 years, retention rates were 81 % (65.8-90.5) for SE, 87 % (73.2-94.4) for SET + SE, 84 % (69.6-92.6) for ERD, and 78 % (63.6-88.9) for ERW (p > 0.05). Thirty-five restorations were considered to have minor discrepancies in marginal adaptation at the 5-year recall (14 for SE, 9 for SET + SE, 6 for ERD, and 6 for ERW; p > 0.05). Sixteen restorations were detected as a minor marginal discoloration (6 for SE, 4 for SET + SE, 1 for ERD, and 5 for ERW; p > 0.05) and one restoration showed a recurrence of caries (1 for ERW; p > 0.05) at the 5-year recall. No restorations showed postoperative sensitivity after 5 years.

SIGNIFICANCE

NCCLs restorations using a universal adhesive showed satisfactory clinical performance after 5 years, regardless of the adhesive strategy.

Influence of carbonated acid beverage on fracture resistance and marginal gap formation in different restorative approaches to non-carious cervical lesions

OBJECTIVE

This study is to evaluate fracture resistance, failure mode, and gap formation at the restorative interface of unrestored or restored non-carious cervical lesions (NCCLs) submitted to a short-term erosive environment.

MATERIALS AND METHODS

Artificial NCCLs were produced in vitro in bovine incisors, and were randomly divided into four restorative resins groups (n = 22): nanohybrid-NR; bulk-fill-BR; flow with a nanohybrid layer-FNR; bulk-fill with a nanohybrid layer-BNR; and a group unrestored-UR (n = 16). Half of the specimens were submitted to an erosive challenge (per 5 min, 3 × a day for 7 days, before and after restoration), and the other half, was immersed in artificial saliva. After, all teeth undergone thermal (5 ºC, 37 ºC, and 55 ºC, 3600 cycles) and mechanical (50 N, 2 Hz, 300,000 cycles) aging. Eighty teeth were subjected to compressive loading, and resistance and failures were analyzed, while 24 teeth were evaluated for gaps by microcomputed tomography. Statistical tests were performed (p < 0.05).

RESULTS

The restorative approaches affected fracture resistance (η2p = 0.14, p = 0.023), and gap formation (η2 = 0.18, p = 0.012) and so did the immersion medium (fracture η2p = 0.09, p = 0.008; gap η2 = 0.09, p = 0.017). BNR showed the highest resistance, while UR the lowest. FNR showed the highest gaps in both immersion media. Neither the resin groups nor the immersion media were associated with failure mode.

CONCLUSIONS

The erosive immersion medium based in acid beverages has been shown to affect NCCLs with or without restoration, but when Bulk-Fill resin is covered by nanohybrid resin, the performance is good.

CLINICAL RELEVANCE

Erosion negatively affects restorations, but unrestored NCCL shows worse biomechanical performance in stress-bearing situations.

Effect of brushing force on the abrasive dentin wear using slurries with different abrasivity values

OBJECTIVE

The aim of this study was to investigate the resulting abrasive dentin wear using abrasive slurries with different RDA values and applying increasing brushing forces.

METHODS

Forty-five bovine incisors were randomly allocated in three groups (A, B, C, n = 15). One hundred and eighty dentin samples were prepared from these incisors and allocated to twelve groups (A1-A4, B1-B4, C1-C4; n = 15). The groups were subjected to a brushing cycle (120 strokes/min, 25 min) as follows: groups A1 to A4 with an abrasive slurry (RDA = 71) applying increasing brushing forces (1, 2, 3 and 4 N). Groups B1 to B4 were brushed using an abrasive slurry (RDA = 85) and C1 to C4 (RDA = 133) applying the same above-mentioned brushing forces. Abrasive dentin wear was recorded using a stylus profilometer and compared amongst the groups using robust models. Pairwise comparisons in each model were tested and corrected after Tukey's method (α = 0.05).

RESULTS

Applying 1-N brushing force resulted in the same amount of abrasive dentin wear in all groups regardless of the abrasivity of the used slurry. Increasing the brushing force to 2 N resulted in statistically significantly higher abrasive wear in all groups. This increase in abrasive wear was much higher when the slurry with high abrasivity was used (RDA = 133) compared with the lower abrasive slurry (RDA = 71).

CONCLUSION

The abrasivity of the used slurry does not add to the resulting abrasive wear when the brushing force is kept at 1 N. It seems better to advise and help the patients (showing signs of non-carious cervical lesions) calibrating their brushing force to 1 N, than only to advise them to use toothpastes with lower abrasivities.

Influence of Tucupi on Enamel Surface Roughness, Microhardness, Ultramorphology and Mass Variation

Aim

The study evaluated the influence of tucupi on enamel surface roughness, microhardness, ultramorphology, and mass variation.

Materials and Methods

Ninety healthy bovine incisors were divided into three experimental groups, according to the acidic challenge adopted, being: G1- tucupi, G2- cola-based soft drink, G3-distilled water. The enamel properties (surface roughness, microhardness, ultramorphology and mass variation) of all specimens were evaluated at times T0 (before any intervention), T10 (10 days after the proposed treatments), T20 (20 days after the proposed treatments) and T30 (30 days after the proposed treatments). After confirming the normality of the data (Shapiro-Wilk test), a two-way ANOVA (α = 5%) was performed, followed by Sidak post-test, with results described as mean and standard deviation.

Results

The roughness means increased for all tested groups, with no statistical difference only in G3 for all evaluated times. Microhardness of all groups showed a significant decrease over the time, with the lowest average observed in G1 in T30. Considering enamel mass variation, the lowest average was in G2 at time T3, with no statistical difference only in G3 (distilled water) over the time. Regarding ultramorphology (scanning electron microscopy - SEM), only groups G1 and G2, that were exposed to acidic challenges, showed disorganization of the enamel surface layer.

Conclusion

It was possible to conclude that tucupi has low pH and high titratable total acidity, being able to gradually decrease enamel microhardness, increasing surface roughness and causing loss of dental enamel.

Photobiomodulation therapy and 3% potassium nitrate gel as treatment of cervical dentin hypersensitivity: a randomized clinical trial

OBJECTIVES

This randomized controlled trial aimed to evaluate different protocols for dentin hypersensitivity treatment with low-power lasers and desensitizing agents, and the association between low-power lasers and desensitizing agents.

MATERIALS AND METHODS

Fifty-four patients (303 teeth) were randomly allocated to three groups: G1, 3% nitrate potassium gel, UltraEZ (n = 17); G2, photobiomodulation therapy (PBM) with a low-level infrared laser (n = 17), 100 mW, spot size of 0.028 cm2, and dose of 1 J per point; and G3, nitrate potassium + PBM (n = 20). Treatments were applied to the buccal cervical region at intervals of 72 h, and all protocols were performed in three sessions. The patients' response to evaporative stimuli was rated using the visual analog scale (VAS). Re-evaluations were performed immediately after each application and 1 week, 1 month, and 3 months after treatment. A two-way repeated measures test and Tukey's post hoc test were used for multiple comparisons (α = 5%).

RESULTS

There was a reduction in pain levels at the end of treatment in all groups. There were no significant differences in VAS score changes between the groups immediately after treatment and after the third month, compared to the baseline (p > 0.05).

CONCLUSION

Under the limitations of this in vivo study, the proposed three-session protocol was effective in reducing dentin hypersensitivity after 3 months, regardless of the desensitization mechanism used. Conservative and long-term protocols are interesting for the control of pain caused by dentin hypersensitivity.

CLINICAL RELEVANCE

The increase in cervical dentin hypersensitivity prevalence warrants easy-to-apply and long-lasting desensitizing protocols for pain control.

Sixty-month follow up of three different universal adhesives used with a highly-filled flowable resin composite in the restoration of non-carious cervical lesion

OBJECTIVE

The purpose of this clinical trial was to evaluate and compare the performances of three different universal adhesives used with a highly filled flowable universal resin composite in the restoration of non-carious cervical lesions (NCCLs) over a 60-month period.

MATERIAL AND METHODS

Ninety-nine NCCLs were restored at 18 participants. NCCLs were divided into three different universal adhesive groups: Clearfil Universal Bond (CU) (n = 31), iBOND Universal (IU) (n = 33), and G-Premio Bond (GP) (n = 35). Prior to the adhesive procedures, selective enamel etching was performed with 37% phosphoric acid in all experimental groups. Adhesive systems were applied following the manufacturers' instructions, and the lesions were restored with a highly filled flowable resin composite (G-ænial Universal Flo). Restorations were finished and polished immediately after placement. All restorations were scored with regard to retention, marginal discoloration, marginal adaptation, sensitivity, surface texture, and color match using modified United States Public Health Service (USPHS) criteria after 1 week (baseline) and 6, 12, 18, 24, 36, and 60 months. Statistical analyses were performed using chi-square and McNemar's and Kaplan Meier tests. The level of significance was set at p < 0.05.

RESULTS

After 60 months, the recall rate was 72.2%. Survival rates of CU, IU, and GP restorations were 87%, 85.2%, and 96.5%, respectively. Five CU (25%), 8 IU (34.8%), and 12 GP (42.9%) restorations exhibit bravo scores for marginal adaptation. However, no differences were seen among them. CU showed lower bravo score than IU and GP for marginal discoloration (CU, 0%; IU, 26.1%; GP, 32.1%). Two CU, 7 IU, and 6 GP restorations showed bravo scores for surface texture, and 2 (9.1%) CU and 1 (3.3%) GP restorations were scored as bravo score for color match (p > 0.05).

CONCLUSION

The tested universal adhesives showed similar success rates during the 60-month follow-up. However, CU showed better clinical performance than IU and GP in terms of marginal adaptation and discoloration.

TRIAL REGISTRATION

ClinicalTrials.gov Identifier: NCT03415412 CLINICAL RELEVANCE: The long-term clinical performances of the three universal adhesives in the restoration of NCCLs using selective enamel etching mode were successful after 60 months.

Effect of tapered-end and round-end bristles on the abrasive dentine wear applying increasing brushing forces

OBJECTIVE

To investigate the effect of toothbrush bristles end configuration on the abrasive dentine wear at different brushing forces.

MATERIAL AND METHODS

One hundred and sixty bovine dentine samples were randomized into eight groups (n = 20). Groups (1 to 4) were brushed with tapered-end bristles at 1-, 2-, 3-, and 4-N brushing forces, respectively. Groups (5 to 8) were brushed with round-end bristles with the same brushing forces. The brushing sequence was carried out using an abrasive slurry (RDA = 121) for 25 min. Profiles were recorded using a contact profilometer. Mean and standard deviation were calculated for the abrasive dentine wear in each group. Two-way ANOVA was used to locate any significance. The significance values were corrected after Tukey (α = 0.05).

RESULTS

Brushing with tapered-end bristles resulted in statistically significantly less abrasive dentine wear than round-end bristles regardless of the applied brushing force (1 N: 4.4 ± 1.5 vs. 7.7 ± 2.0 µm; 2 N: 7.7 ± 2.1 vs. 12.2 ± 2.7 µm; 3 N: 11.3 ± 2.6 vs. 19.4 ± 3.7 µm; 4 N: 11.2 ± 2.1 vs. 25.3 ± 4.8 µm). The interaction between bristle configuration and brushing force was statistically significantly (p < 0.001).

CONCLUSION

Tapered-end toothbrushes might be a safer choice for patients, especially when showing signs of non-carious cervical lesion. However, other toothbrush properties should also be considered.

Comparative Evaluation of Microleakage of Flowable Composite Resin Using Etch and Rinse, Self-Etch Adhesive Systems, and Self-Adhesive Flowable Composite Resin in Class V Cavities: Confocal Laser Microscopic Study

The essential factor in determining the preservation of restoration is the marginal seal. Restoring cervical lesions with a resin composite has always been a challenge. Composite resins with various viscosities and different bonding systems are being researched to reduce the microleakage. Confocal laser scanning microscopy (CLSM) is the latest non-destructive technique for visualizing the microleakage. Objectives: To evaluate and compare the microleakage of Universal Flo composite resin (G-aenial) using etch and rinse adhesive system ER-2 steps (Adper Single Bond 2), self-etch adhesive system SE-1 step (G-Bond), and self-adhesive flowable composite resin (Constic) in Class V cavities using a confocal laser scanning microscope. Materials and Method: Class V cavities were prepared on 27 caries-free human extracted premolar teeth on the buccal and lingual surfaces with standardized dimensions of 2 mm height, width 4 mm, and a depth of 2 mm. After the cavity preparation, all teeth were randomly divided into three groups, namely Group-I: G-aenial Universal Flo with Single Bond 2 (n = 9 teeth); Group-II: G- aenial Universal Flo with G-Bond (n = 9 teeth), and Group-III: Constic (n = 9 teeth). The prepared and restored specimens were then subjected to thermocycling for 500 cycles in a water bath at 5 °C and 55 °C with a dwelling time of 30 s. The specimens were placed in 0.6% aqueous rhodamine dye for 48 h. Sectioning was carried out bucco-lingually and specimens were evaluated for microleakage under a confocal laser scanning microscope. Results: There was a significant difference (p = 0.009) in microleakage when comparing total etch and rinse, specifically between Adper Single Bond 2 ER-2 steps (fifth generation) and self-adhesive flowable composite resin, which is Constic. There was more microleakage in the self-etch bonding agent, particularly G-Bond, SE-1 step (seventh generation), when compared to ER-2 steps (fifth generation bonding agent); however, the results were not statistically significant (p = 0.468). The self-adhesive flowable composite resin showed more microleakage than SE-1 step and ER-2 steps. Conclusions: None of the adhesive systems tested were free from microleakage. However, less microleakage was observed in the total etch and rinse, especially Adper Single Bond 2 (ER-2 steps), than the self-etch adhesive system SE-1 step and self-adhesive flowable composite resin. Clinical significance: Constant research and technological advancements are taking place in dentin adhesives to improve the marginal seal. This has led to the evolution of total acid-etching dentin bonding agents termed as etch and rinse (ER)-2 steps (fifth generation dentin bonding agents) and self-etching (SE) 2 steps, and SE-1 step dentin bonding agents termed as the sixth and seventh generation bonding agents, respectively.

Clinical Behavior of the Gingival Margin following Conservative “Coronally Dynamic” Restorations in the Presence of Non-Carious Cervical Lesions Associated with Gingival Recession: A Pilot Study

Gingival recessions (GR) are often associated with the presence of non-carious cervical lesions (NCCL). The latter result in the disappearance of the cement–enamel junction (CEJ), with consequent difficulties both in measuring the recession itself and in performing root coverage techniques. The restoration of cervical lesions is consequently an important aspect in the treatment of GR, with the re-establishment of a “new” CEJ. This pilot study aimed to verify whether restorative therapy alone, with the execution of a restoration that mimics the convexity of the natural CEJ and thanks to a slight horizontal over-contour, can stabilize a clot in the intrasulcular site and consequently is able to change the position of the gingival margin in a coronal direction. In periodontally healthy patients, with a non-thin gingival phenotype, 10 GR-associated NCCL restorations were performed using a protocol inspired by concepts of prosthetic conditioning, with a progressively reduced convexity (“coronally dynamic restoration”) and de-epithelialization of the gingival sulcus. We observed that 70% of the treated teeth showed a reduction in crown length after 15 days (−0.267 mm), without an increase in probing depth. While considering the limitations of the sample and the need to evaluate the different parameters that can affect the result, the coronally dynamic restoration of NCCL with GR was able to influence the position of the gingival margin in a coronal direction.

Simulation of Non-Carious Cervical Lesions by Computational Toothbrush Model: A Novel Three-Dimensional Discrete Element Method

Non-carious cervical lesions (NCCLs) are saucer-shaped abrasions of a tooth. NCCLs can form due to various etiologies, including toothbrushing wear, acid erosion, and mechanical stress. Owing to this complex interplay, the mechanism of NCCLs in tooth abrasion has not been established. This study aims to develop a numerical method using a computational toothbrush to simulate NCCLs. The forces acting on the teeth and the amount of abrasion generated were evaluated. The discrete element method using in-house code, connected particle model, and Archard wear model were applied for brushing. In the toothbrush model, 42 acrylic tufts were fixed into a toothbrush head. The teeth models with enamel properties comprised four flat plates and two grooves to simulate the anterior teeth and NCCLs. The brushing speed and depth for one cycle were established as simulation parameters. The force applied within the ununiform plane was concentrated on several bristles as the toothbrush passed through the interproximal space. The brushing force (depth) had a greater effect on tooth abrasion than the brushing speed. Toothbrushing abrasion was mainly concentrated in the interproximal space. Therefore, forceful tooth brushing can cause NCCLs from the interproximal space to the cervical area of the tooth.

Prevalence of non-carious cervical lesions and orthodontic treatment: a retrospective study

Background

This study aimed to assess the distribution of non-carious cervical lesions (NCCLs) by tooth type, investigate the prevalence of NCCLs in patients undergoing orthodontic treatment, and identify the possible associated factors.

Material and methods

A total of 160 patients were enrolled in this retrospective study. Data on the following variables were collected from pre-and post-orthodontic treatment records: age, sex, Angle’s malocclusion, facial pattern, number of activation sessions, compensatory treatment, and retreatment. Frontal, right and left lateral intraoral photographs of each patient were evaluated to identify the presence or absence of NCCLs in each tooth and assess the distribution of NCCLs in the 3840 teeth from the enrolled patients. Furthermore, patients were classified as NCCLs present, irrespective of the number of NCCLs on the teeth or NCCL absent. Bivariate and multivariate Poisson regression analyses with robust variance were used to assess the association between the NCCLs and each independent variable. Prevalence ratio and 95% confidence intervals were calculated and p < 0.05 was considered statistically significant.

Results

The prevalence of NCCLs before and after orthodontic treatment was 22.71% and 30.91%, respectively. Premolars were the most affected teeth, followed by the first molars, canines, and incisors. After statistical analysis, age was found to be the variable factor that influenced the prevalence ratio, with NCCL being the most prevalent when orthodontic treatment was performed in adulthood.

Conclusions

Premolars were most commonly affected by NCCLs. Furthermore, age seemed to contribute to the increased prevalence of NCCLs in adults undergoing orthodontic treatment.

Restorative difficulty evaluation system of endodontically treated teeth

OBJECTIVE

This article provides an updated overview of restorative procedures of endodontically treated teeth.

CLINICAL CONSIDERATIONS

The different techniques and procedures to restore an endodontic treated tooth were considered in the last decades. While they are generally performed using bonding procedures in combination with or without the placement of a post into the root to build up the abutment, there has been a lack of interest in restorative difficulties that can be faced. Failures are represented such as debonding of the post, fracture of the root, decementation, and/or fracture of the restoration, microleakage of the margins. Essentially, the presence of a sufficient failure is considered a key point of a long prognosis. Different clinical factors can directly influence the type of restoration and the longevity of the treatment. The restorative difficulty evaluation system (RDES) is proposed in this article. This new system is composed of eight different clinical factors that are divided into six levels of difficulties. The RDES is composed of 1. Endodontic complexity and outcome, 2. Vertical amount of coronal residual structure and dimension of the pulp chamber, 3. Horizontal amount of coronal residual structure, 4. Restoration marginal seal, 5. Local interdisciplinary conditions, 6. the complexity of the treatment planning, 7. Functional need, 8. Dental wear and esthetic need.

CONCLUSION

This article reviews the RDES and outlines critical steps and tips for clinical success.

CLINICAL SIGNIFICANCE

The RDES allows to any clinician to evaluate restorative difficulties when an endodontic treated tooth must be restored, combines clinical aspects that can involve from the single tooth to a full mouth rehabilitation.

Effect of the toothbrush tuft arrangement and bristle stiffness on the abrasive dentin wear

The geometrical properties of toothbrushes play a role in developing abrasive tooth wear and non-carious cervical lesions. This study investigated the interplay between the toothbrush tuft arrangement (crossed vs. parallel) and bristle stiffness (soft vs. medium) on the abrasive dentin wear using three slurries with different levels of abrasivity (RDA: 67, 121 and 174). Twelve groups of bovine dentin samples (n = 20) were brushed with a combination of the aforementioned variables. Abrasive dentin wear was recorded with a profilometer and the resulting abrasive wear of each group was calculated and compared with each other using two-way ANOVA and pairwise tests. Toothbrushes with parallel tuft arrangement caused statistically significantly higher dentin wear compared to crossed tuft arrangement, regardless of the abrasivity level of the used slurry and the bristle stiffness. Soft crossed tuft toothbrushes caused statistically significantly higher abrasive dentin wear than medium crossed tuft toothbrushes, while soft and medium parallel tuft toothbrushes caused the same amounts of dentin wear, regardless of the RDA value of the used slurry. These results could be helpful for dentists and dental hygienists when advising patients. Crossed tuft toothbrushes could be a less-abrasive choice in comparison to parallel tuft toothbrushes.

Resin infiltrant protects deproteinized dentin against erosive and abrasive wear

Objectives

This study aimed to investigate the anti-erosive/abrasive effect of resin infiltration of previous deproteinized dentin.

Materials and Methods

Dentin slabs were randomly assigned to 3 groups (n = 15): Control (no deproteinization; no resin infiltrant applied), RI (no deproteinization; resin infiltrant applied), and DRI (deproteinization; resin infiltrant applied). After undergoing the assigned treatment, all slabs were subjected to an in vitro cycling model for 5 days. The specimens were immersed in citric acid (0.05 M, pH = 3.75; 60 seconds; 3 times/day) and brushed (150 strokes). Between the challenges, the specimens were exposed to a remineralizing solution (60 minutes). The morphological alterations were analyzed by mechanical profilometry (µm) and scanning electron microscopy (SEM). Data were submitted to one-way analysis of variance (ANOVA) and Tukey tests (p < 0.05).

Results

Control and RI groups presented mineral wear and did not significantly differ from each other (p = 0.063). DRI maintained a protective layer preserving the dentin (p < 0.001). After erosive/abrasive cycles, it was observed that in group RI, only 25% of the slabs partially evidenced the presence of the infiltrating, while, in the DRI group, 80% of the slabs presented the treated surface entirely covered by a resin-component layer protecting the dentin surface as observed in SEM images.

Conclusions

The removal of the organic content allows the resin infiltrant to efficiently protect the dentin surface against erosive/abrasive lesions.

B, Garoushi S. Fracture Behavior and Integrity of Different Direct Restorative Materials to Restore Noncarious Cervical Lesions

The purpose of this study was to analyze the fracture resistance and marginal leakage of noncarious cervical lesion (NCCL) restorations made of different restorative materials. Eighty upper premolars were randomly divided into four groups (n = 20/group). Standardized NCCL cavity preparations were performed on the buccal surface of the teeth and then restored with four different materials. Group 1: Packable resin composite (PC); Group 2: Highly flowable resin composite (HF); Group 3: Low flowable resin composite (LF); Group 4: Resin modified glass ionomer cement (RMGIC). After restorations were completed, cyclic and static fracture behavior was evaluated using a loading testing machine. Extra restored teeth were sectioned and then stained (n = 5/group). The specimens were viewed under a stereo microscope and the percentage of microgaps at the tooth–restoration interface was calculated. All restored teeth survived after fatigue loading. There was no statistically significant (p > 0.05) difference between the tested restorations after the static loading test. NCCLs restored with highly filled flowable composite showed the least microleakage among the tested groups (p < 0.05). The investigated restorative materials are acceptable for NCCL restorations in terms of fracture resistance and microleakage.

Is prolonged bleaching more harmful to dental enamel than daily dietary and hygienic oral habits?

The ultrastructural and mechanical properties of enamel surface were evaluated after prolonged bleaching treatments with 10% carbamide peroxide in the presence or absence of orange juice (erosive challenge) and toothbrushing (abrasive challenge). In total, 145 incisor bovine teeth were used in this study. Twenty-five samples were prepared for the ultrastructural evaluations, and 120 samples were prepared for microhardness and roughness tests. These 120 samples were divided into eight experimental groups (n = 15): G1- artificial saliva; G2- abrasion; G3- erosion; G4- dental bleaching; G5- erosion + abrasion; G6- bleaching + abrasion; G7- bleaching + erosion; and G8- bleaching + erosion + abrasion. All groups were tested at T0 (before treatment), T1 (14 days), T2 (21 days), and T3 (28 days). Two-way analysis of variance for repeated measures and the post hoc Sidak tests (p ≤ 0.05) were used. The roughness evaluation demonstrated an increase in damage for all experimental groups with an increase in the time period. For microhardness, the groups exposed to artificial saliva (AS) and abrasive challenge did not show any differences at any time points, while the other groups showed a decrease in microhardness from T0 to T3. Ultrastructural evaluation showed different surface alterations in response to the treatments. Despite prolonged bleaching periods, the procedure caused lesser enamel surface alterations than exposure to orange juice alone or in combination with brushing.

Occlusal problems, mental health issues and non-carious cervical lesions

Non-carious cervical lesions (NCCLs) are characterized by a loss of hard dental tissue near the cement-enamel junction with multifactorial etiology. The aim of this study was to demonstrate that occlusal factors as attrition, malocclusion, and bruxism, and mental disorders as depression, stress, and anxiety are involved in the etiology of NCCLs. Salivary samples and clinical data of 340 individuals selected from 6,112 participants were obtained from the University of Pittsburgh School of Dental Medicine Dental Registry and DNA Repository project. The affected group was formed by individuals with NCCL (34 females, 34 males, mean age 55.34 years). In addition, the comparison group was formed by individuals without NCCL (136 females, 136 males, mean age 55.14 years). Eleven single-nucleotide polymorphisms (SNPs) previously associated with mental disorders were genotyped and tested for association with NCCLs. When all occlusal factors were combined there was found a significant association with NCCL (p = 0.000001/adjusted OR 4.38, 95% CI 2.50-7.69). Attrition (OR 3.56, 95% CI 2.00-6.32) and malocclusion (OR 5.09, 95% CI 1.65-15.68) as separate variables showed statistically significant associations with NCCL. There was a significant difference in stress history between the two groups (OR 2.17, 95% CI 1.08-4.39). No associations between NCCLs and the SNPs selected were found. However, when the occlusal factors were analyzed as covariates, associations were found between bruxism and seven of the selected SNPs. Our results suggest that occlusal factors might be associated with NCCLs.

Effect of Interval Time between Corrosive and Abrasive Challenges on a Nanoparticulate Composite Resin

Objective This study aimed to evaluate the effect of interval time after acidic beverage intake and brushing on roughness and hardness of resin composite.

Materials and Methods Nanofilled resin composites were tested as per interval time (no interval, 15 or 30 minutes) between aging media (isotonic, sports drink) and brushing. Specimens ( n = 9) were subjected to three cycles daily for 5 days with immersion in beverage followed by simulated brushing (585 strokes). The brushing (control) group was submitted only in brushing cycles. Roughness and microhardness were analyzed in the baseline and end of the experiment. Surface morphology was analyzed by using scanning electron microscopy (SEM).

Statistical analysis Data were analyzed by one-way ANOVA and Tukey’s honestly significant difference (α = 0.05).

Results Roughness was higher in no interval group and lower in 30 minutes and control. The 15 minutes present no statistical difference between control, 30 minutes and no interval. The hardness not present difference between groups. The SEM showed the no interval more roughness than 15 and 30 minutes, control and baseline.

Conclusion The interval time between erosive and abrasive challenge is important to preserve the smoothness surface of composite resin.

The Impact of Sport Training on Oral Health in Athletes

Athletes' oral health appears to be poor in numerous sport activities and different diseases can limit athletic skills, both during training and during competitions. Sport activities can be considered a risk factor, among athletes from different sports, for the onset of oral diseases, such as caries with an incidence between 15% and 70%, dental trauma 14-70%, dental erosion 36%, pericoronitis 5-39% and periodontal disease up to 15%. The numerous diseases are related to the variations that involve the ecological factors of the oral cavity such as salivary pH, flow rate, buffering capability, total bacterial count, cariogenic bacterial load and values of secretory Immunoglobulin A. The decrease in the production of S-IgA and the association with an important intraoral growth of pathogenic bacteria leads us to consider the training an "open window" for exposure to oral cavity diseases. Sports dentistry focuses attention on the prevention and treatment of oral pathologies and injuries. Oral health promotion strategies are needed in the sports environment. To prevent the onset of oral diseases, the sports dentist can recommend the use of a custom-made mouthguard, an oral device with a triple function that improves the health and performance of athletes. During training, the sports dentist must monitor the athletes and the sports examination protocol must be implemented with the inclusion of the clinical examination, quantitative and qualitative analysis of saliva and instructions on the use, cleansing and storage of the mouthguard.

Influence of Diode Laser for the Treatment of Dentin Hypersensitivity on Microleakage of Cervical Restorations

Noncarious cervical lesions (NCCLs) are a common clinical finding often linked with dentin hypersensitivity (DH). Aim. The aim of the study was to evaluate the influence of diode laser for the treatment of DH on microleakage of subsequent NCCL restorations. Materials and Methods. Forty-eight extracted human premolars were collected. All teeth received standardized cervical preparation on both the buccal and palatal surfaces and were randomly divided into three groups (n = 16) according to the restorative material used: nanohybrid composite resin (CR), resin-modified glass ionomer (RMGI), and conventional glass ionomer (GIC). The prepared cavities on the palatal surfaces were treated by diode laser using SIROlaser Blue (Sirona Dental Systems, Bensheim, Germany) prior to restoration, while preparations on the buccal surfaces were directly restored. After thermocycling, the teeth were immersed in methylene blue dye for microleakage evaluation under 40x magnification at both occlusal and cervical margins. The Kruskal-Wallis test followed by the Bonferroni tests was conducted to determine inter- and intragroup differences (P < 0.05). Results. All restorative materials tested showed some degree of microleakage with no statistically significantly different scores with or without the use of laser desensitization prior to restorative treatment. Group CR showed the least microleakage, followed by group RMGI, while group GIC showed the highest. Cervical margins showed greater microleakage than the occlusal margins where the difference was statistically significant in the RMGI group without laser pretreatment (P = 0.006) and in both groups CR (P = 0.02) and RMGI (P = 0.006) with the laser pretreatment. Conclusion. Application of diode laser for the treatment of DH prior to the restoration of teeth with NCCL did not affect the microleakage of all the restorative materials tested. All the materials showed some degree of microleakage, which was higher in gingival margins compared to occlusal margins. The resin composite shows the least microleakage among all the tested materials.

Effect of dentifrice slurry abrasivity and erosive challenge on simulated non-carious cervical lesions development in vitro

PURPOSE

To investigate the effect of slurry abrasive levels and acidic challenges on the development of non-carious cervical lesions.

METHODS

Ninety-six extracted upper premolars were affixed in pairs to acrylic blocks and had their root surfaces covered by acrylic resin except for 2 mm from the cemento-enamel junction. The specimens were distributed into six groups (n = 8 pairs) based on two experimental factors: (1) slurry abrasivity level [low/medium/high] and (2) citric acid challenge [yes/no]. Specimens were brushed for 5,000, 15,000, 35,000, and 65,000 strokes. Volume loss (VL) was determined based on optical profilometry scans of specimens impressions at the baseline and at subsequent brushing levels. Data were analyzed using repeated measures analysis of variance and Bonferroni pairwise comparison (α = 0.05).

RESULTS

Higher VL values were associated with high-abrasivity slurries relative to low- and medium-abrasivity slurries (P < 0.001). Increasing the slurry abrasivity level increased the VL regardless of the acidic challenge, which did not have a significant effect (P = 0.184). After 65,000 strokes, significant VL was recorded in all groups relative to preceding brushing levels (P < 0.001).

CONCLUSION

Higher values of time-dependent surface loss were associated with increased dentifrice slurry abrasivity, regardless of the citric acid challenge.

Multidisciplinary Treatment of Deep Non-Carious Cervical Lesion With a CAD/CAM Chairside Restoration in Combination With Periodontal Surgery: A 60-Month Follow-Up Technique Report

INTRODUCTION

Restoring function and esthetics are essential aspects of periodontology and restorative dentistry. Depending on their extension and the tissues involved, the treatment of non-carious cervical lesions (NCCLs) associated with gingival recessions may require a multidisciplinary approach, and different periodontal and restorative techniques have been described.

CASE PRESENTATION

This case report presents an innovative approach to treat a deep NCCL combined with a gingival recession in a canine region of a female patient. A Computer Aided Design - Computer Aided Manufacturing (CAD/CAM) chairside ceramic restoration in combination with mucogingival surgery procedures is described. A comprehensive analysis of the selected approach and its clinical implications is presented based on a 60-month follow-up. Conclusions After 60-month follow-up, clinical condition maintained stable, and a successful esthetic outcome was accomplished. Complete root coverage was achieved and kept throughout the whole period of tracing.

Influence of Er,Cr:YSGG laser on root dentin submitted to erosive and/or abrasive challenges

This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 μm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Factors Associated with Noncarious Cervical Lesions in Different Age Ranges: A Cross-sectional Study

OBJECTIVES

 Understanding the possible risk factors of noncarious cervical lesion (NCCL) is important for prevention and clinical management of the condition. The aim of this study was to investigate the factors associated with the prevalence of NCCL among adolescents, adults, and elderly people.

MATERIALS AND METHODS

 A cross-sectional study involving 501 participants aged 15 years or older was conducted. Participants were examined to assess the number of natural teeth and the prevalence and severity of NCCL by calibrated examiners. Data on age, gender, harmful toothbrushing habits, and acidogenic diet were collected through individual interviews. Multivariate Poisson's regression models were used to evaluate the association between the independent variables and the prevalence of NCCL according to the three age groups: 15 to 39, 40 to 64, and 65 years or older. RESULTS : The prevalence of NCCL among participants was 62.5% (95% confidence interval: 58.2-66.7). Among 15- to 39-year-old participants, the mean of NCCL was higher in males, those with lower number of teeth and acidogenic diet intake. Males aged 40 to 64 years and those with harmful brushing habits were more likely to present higher mean of NCCL. Elderly people with harmful toothbrushing habits had a greater mean of NCCL.

CONCLUSION

 Demographic (age and gender), clinical (number of teeth), and behavioral characteristics (harmful brushing habits and acidogenic diet) were meaningful factors associated with NCCL severity. The above-mentioned relationships varied between age groups.

Prevalence of non-carious cervical lesions and cervical dentinary hypersensitivity in undergraduate students

Abstract Introduction The non-carious cervical lesion (NCCL) is currently a common oral disease. Objective This observational and descriptive study aimed to assess risk factors associated with non-carious cervical lesions, cervical dentin hypersensitivity (CDH), gingival recession (GR) and the relationship between these conditions in students in the last years of undergraduate dentistry. Material and method One hundred eighty-five dentistry students from a private college in Ceará with an average of 22.7 ± 2.3 years participated by filling out a google docs form. Two calibrated examiners performed the exams to verify the presence of NCCL, CDH and RG. Result The presence of NCCL was 22.7%, GR was 48.1% and cervical dentin hypersensitivity 8.6%. The chi-square test with p < 0.05% verified a correlation between the presence of NCCL and the presence of GR and CDH. 25% of students had NCCL and 14% considered themselves stressed. There was no association between the variables bruxism and stress (p=0.529), bruxism and year of graduation course (p=0.716), as well as no association between stress and year of course (p = 0.397) was observed. There were no correlations between NCCL and bruxism, muscle symptoms, parafunctional habits and temporomandibular dysfunction. 10.8% of students who reported using legal and illegal drugs had NCCL. Conclusion The NCCL, GR and CDH were correlated in the group of students in the last two years of an undergraduate dentistry course in Ceará.

Establishment of microcosm biofilm models that reproduce a cariogenic diet intake

Biofilms were developed from human saliva on bovine enamel discs in four experimental conditions to investigate dental caries development: feast and famine (M1), abundance and scarcity (M2), three meals daily (M3), and three meals plus two snacks daily (M4). The main difference between these models was the diet for microbial growth. The evaluations included verifying the pH of the spent culture media and analyzing the enamel discs for demineralization (microhardness and roughness) and biofilms (biomass, viable populations of mutans streptococci, and total microbiota). Two major behaviors were observed: M1 and M2 promoted an acidic environment, while M3 and M4 maintained pH values closer to neutral. The demineralization process was slower in the neutral groups but more pronounced in M3, while a greater increase in microbiota and biomass was observed over time for both neutral groups. Thus, the M3 model was better at mimicking the oral environment that leads to demineralization.

One-year evaluation of a new restorative glass ionomer cement for the restoration of non-carious cervical lesions in patients with systemic diseases: a randomized, clinical trial

OBJECTIVE

This randomized and clinical trial aimed to evaluate the performance of a new restorative Glass Ionomer Cement (GIC) for the restoration of non-carious cervical lesions (NCCLs) of patients with systemic diseases compared with a posterior resin composite after 12 months.

METHODOLOGY

134 restorations were placed at 30 patients presenting systemic diseases by a single clinician. NCCLs were allocated to two groups according to restorative system used: a conventional restorative GIC [Fuji Bulk (GC, Tokyo Japan) (FB)] and a posterior resin composite [G-ænial Posterior (GC, Tokyo Japan) (GP)] used with a universal adhesive using etch&rinse mode. All restorative procedures were conducted according to manufacturer's instructions. Restorations were scored regarding retention, marginal discoloration, marginal adaptation, secondary caries, surface texture, and post-operative sensitivity using modified United States Public Health Service (USPHS) criteria after 1 week (baseline), 6, and 12 months. Descriptive statistics were performed using chi-square tests. Cochran Q and Mc Nemar's tests were used to detect differences over time.

RESULTS

After 12 months, recall rate was 93% and the rates of cumulative retention failure for FB and GP were 4.9% and 1.6% respectively. Both groups presented similar alpha rates for marginal adaptation (FB 86.2%, GP 95.5%) and marginal discoloration (FB 93.8%, GP 97%) at 6-month recall, but FB restorations showed higher bravo scores than GP restorations for marginal adaptation and marginal discoloration after 12 months (p<0.05). Regarding surface texture, 2 FB restorations (3.1%) were scored as bravo after 6 months. All restorations were scored as alpha for secondary caries and postoperative sensitivity after 12 months.

CONCLUSION

Although the posterior resin composite demonstrated clinically higher alpha scores than the conventional GIC for marginal adaptation and discoloration, both materials successfully restored NCCLs at patients with systematic disease after a year.

CLINICAL RELEVANCE

Due to its acceptable clinical results, the tested conventional restorative GIC can be used for the restoration of NCCLs of patients with systemic diseases.

A New Dual-cure Universal Simplified Adhesive: 18-month Randomized Multicenter Clinical Trial

CLINICAL RELEVANCE

Non-carious cervical lesion restorations using a dual-cure universal adhesive in self-etch and etch-and-rinse mode showed satisfactory clinical performance after 18 months.

SUMMARY

Objectives: The objective of this multicenter, double-blind, split-mouth randomized clinical trial was to evaluate the clinical performance of a new dual-cure universal adhesive system (Futurabond U, Voco GmBH) when applied using different strategies over a period of 18 months.Methods and Materials: Fifty patients participated in this study. Two hundred non-carious cervical lesions were restored using the adhesive Futurabond U according to four adhesive strategies (n=50 per group): only self-etch (SEE), selective enamel etching + self-etch (SET), etch-and-rinse with dry dentin (ERDry), and etch-and-rinse with wet dentin (ERWet). After the adhesive application, cavities were restored using Admira Fusion composite resin. These restorations were evaluated according to FDI World Dental Federation criteria for the following characteristics: retention/fracture, marginal adaptation, marginal staining, postoperative sensitivity, and caries recurrence.Results: After 18 months, only four patients (12 months: one patient, n=4 restorations; and 18 months: three patients, n=12 restorations) were not evaluated. Fourteen restorations were lost after 18 months of clinical evaluation (four for SEE, three for SET, three for ERDry, and four for ERWet). The retention rates for 18 months (95% confidence interval) were 92% (81%-97%) for SEE, 94% (83%-97%) for SET, 94% (83%-97%) for ERDry, and 92% (81%-97%) for ERWet (p>0.05). Thirty-eight restorations were considered to have minor discrepancies in marginal adaptation at the 18-month recall (13 for SEE, 13 for SET, six for ERDry, and six for ERWet; p>0.05). Fourteen restorations were detected as a minor marginal discoloration at the 18-month recall (six for SEE, six for SET, one for ERDry, and one for ERWet; p>0.05). However, all were considered clinically acceptable. No restorations showed postoperative sensitivity or caries recurrence at the time.Conclusion: The clinical performance of the Futurabond U did not depend on the bonding strategy used, and it was considered reliable after 18 months of clinical evaluation, although more marginal discrepancy was observed in the self-etch group.

Prevalence and risk indicators of non-carious cervical lesions in male footballers

Background

Non-carious cervical lesions (NCCLs) have shown a significant incidence and prevalence and have been increasingly associated with people’s lifestyles and youths. This cross-sectional study aimed to determine the prevalence of NCCLs in footballers and to address potential risk indicators.

Methods

Fourty-three male semi-professional footballers with an average of 27 years old completed a questionnaire and were subjected to intraoral examination in terms of cervical tooth wear, morphological characteristics of NCCLs, tooth sensitivity, occlusal/incisal wear, and malocclusion classification. Also, laboratory assays were performed to determine salivary parameters: flow rate, pH, buffer capacity, level of Ca (calcium), Na (sodium), and K (potassium) ions, and level of cortisol. The data obtained from the questionnaire and intraoral examinations were subjected to Chi-square and Poisson regression models while the data obtained from the laboratory assays were analyzed by using analysis of variance (p <  0.05).

Results

The prevalence of NCCLs was 39.5%. The participants presented predominantly initial lesions with signs of mechanical stress. The daily training time was found as a significant risk indicator (p = 0.028). The multivariate analysis showed a significant difference in the variables daily training time (p = 0.023), lemon water intake while fasting (p = 0.002), toothpaste type (p = 0.004), tooth sensitivity (p = 0.006); previous orthodontic treatment (p = 0.003), and occlusion type (p = 0.008). All participants presented normal salivary parameters and levels of cortisol.

Conclusion

The prevalence of NCCLs among footballers was remarkable. The premolars were the most affected teeth and presented symptoms/signs of initial lesions. The daily training time was a dominant risk indicator of NCCLs development. Footballers presented adequate salivary parameters and cortisol levels.

Influence of cavity depth and restoration of non-carious cervical root lesions on strain distribution from various loading sites

Background

We aimed to investigate the load-induced strain variation in teeth with unrestored and resin-based composite restored non-carious cervical lesions (NCCLs).

Methods

Twelve extracted premolars were provided for measuring buccal-side root NCCLs. Strain gauges were fixed at four measuring sites of each tooth, two at the buccal surface and two at the lingual surface. NCCLs were prepared with occlusal margins at the cemento-enamel junction. A static 9-kg load was applied at seven occlusal loading points: buccal cusp tip (BC), inner inclination of the BC, lingual cusp tip (LC), inner inclination of the LC, center of the mesial marginal ridge or distal marginal ridge, and center of the central groove. The strain was detected at each site in teeth with NCCL depths of 0 (control), 0.5, 1.0, and 1.5 mm. Each NCCL was restored using an adhesive composite resin, and the strains were re-measured.

Results

The strains at the NCCL occlusal and gingival margins decreased with increasing defect depths, and the effect was significant when the depth of the defect was 1.5 mm. Loading on the buccal and lingual cusps induced prominent strain variation. The strains at all depth distribution recovered to nearly intact conditions when the NCCLs were restored.

Conclusions

NCCLs at 1.5 mm depth are detrimental, but they can be restored using resin composites.

Clinical significance

The existence of NCCLs should not be ignored. The depth of the NCCL may affect the progression of the lesion. Resin composite restoration is an appropriate method for preventing persistent NCCL deterioration.

Effect of black tea and matrix metalloproteinase inhibitors on eroded dentin in situ

Purpose of this in situ study was to evaluate the surface properties of eroded dentin specimens activated with three different matrix metalloproteinase (MMP) inhibitors (chlorhexidine [CHX], fluoride, green tea), black tea, and water. One hundred eighty dentin samples were prepared from extracted third molars and then samples divided into six groups. Ten volunteers were carried three specimens of each group, on acrylic palatal appliances, which were fabricated exactly for them (n = 3). Erosive cycles were done by immersing appliances in cup containing Cola and was followed by rinsing with test solutions. Microhardness values were measured. Surface properties were investigated by atomic force microscopy (AFM). Lowest change in microhardness was shown in fluoride group whereas negative control group (water) had the highest change. There were no statistically significant differences among surface roughness changes (p > .05). The least change in microhardness was seen in the fluoride group (13.05 ± 8.07), while the control group showed the highest change (33.80 ± 12.42) and was statistically significant when compared to other groups (p < .05). Besides lowest depth, values were shown in fluoride group as well. AFM evaluations showed macromolecular deposits on surfaces of fluoride, CHX, and black tea groups. No superior results were detected in CHX + fluoride group and black tea showed similar surface characteristics as green tea. Mouthrinses containing not only green tea but also black tea could be beneficial for patients with exposed dentin surfaces. Catechines and theaflavins in teas could be useful for improving surface quality.