Effect of conventional and rolled cigarette smoke on the colour of artificial teeth and effectiveness of hygiene protocols in removing pigmentation - An in vitro study

Context

Artificial teeth are widely used in oral rehabilitation. Despite the benefits, they are more susceptible to colour changes, causing aesthetic problems.

Aims

To evaluate the effect of conventional cigarette and straw smoke on the colour of artificial teeth and the effectiveness of hygiene protocols in removing pigmentation.

Material and Methods

Acrylic resin incisors were divided into two groups (n = 50): Exposed to conventional cigarette and straw smoke. Regarding the effectiveness of hygiene protocols, the teeth were divided into ten subgroups with predetermined immersion times. The colour was measured with a colorimeter. The CIE values L* a* b* were recorded before and after exposure to smoke and after hygiene protocols. Statistical analysis used T-test of independent samples and two-way ANOVA with Bonferroni post-test (α = 0.05).

Results

Conventional (16.16 ± 1.65) and straw (16.29 ± 1.95) cigarettes provided clinically unacceptable ΔE values, with no significant difference between them (P = 0.719). Conventional cigarettes promoted less luminosity (ΔL = -12.68 ± 1.28) (P < 0.001) and straw greater tendency to yellow (Δb = 11.00 ± 1.46) (P < 0.001). The hygiene protocols influenced the ΔE, ΔL, and Δb of the samples, depending on the type of smoke (P < 0.05).

Conclusions

The conventional and rolled cigarette smoke promote an unacceptable colour change in artificial teeth. Hygiene protocols with the use of brushing, in isolation or in association with chemical solutions are more effective in removing pigmentation caused by both types of cigarettes compared to only the chemical solution.

Influence of Er,Cr:YSGG laser on root dentin submitted to erosive and/or abrasive challenges

This study evaluated how Er,Cr:YSGG laser, associated or not with 5% fluoride varnish, influences the surface roughness and volume loss of bovine root dentin submitted to erosive and/or abrasive wear. One hundred and twenty dentin specimens were divided into the groups: without preventive treatment (WPT), 5% fluoride varnish (FV); Er,Cr:YSGG laser irradiation (L), and varnish combined with laser (FV + L). The specimens (n = 10) were subdivided into: 1 = erosion (E); 2 = abrasion (A); and 3 = erosion followed by abrasion (E + A). The erosive solution used was a soft-drink (pH = 2.42 at 4ºC) applied in 5-min cycles twice a day for 10d. Abrasive wear involved brushing for 60s with an electric brush (1,600-oscillations/s) at a load of 2.0N. Surface roughness and volume loss were evaluated using a laser scanning confocal microscope. Roughness data were submitted to one-way ANOVA and Tukey post-hoc test. For volume loss, the Kruskal-Wallis and Dunn's post-hoc tests were used (α = 5%). The lowest values of roughness were found in the control areas of all subgroups (p > 0.05). In the experimental area, the [(WPT) + (E+A)] subgroup had a significantly higher roughness (5.712 ± 0.163 μm 2 ) than the other subgroups (p < 0.05). The L and (FV + L) groups had statistically similar roughness, regardless of the type of wear. The (FV + L) group had the lowest volume loss, regardless of the type of wear performed: [(FV + L) + (E)] = 7.5%, [(FV + L) + (A) = 7.3%, and [(FV + L) + (E + A)] = 8.1%. The subgroup [(WPT) + (E + A)] had the highest volume loss (52.3%). The proposed treatments were effective in controlling dentin roughness. Laser irradiation can be an effective method to increase root dentin resistance after challenges and limit problems related to non-carious lesions.

Influence of Remineralizing Agents on the Surface Roughness of Eroded Dental Enamel: in Vitro Study

The objective of this in vitro study was to evaluate the influence of remineralizing agents on the surface roughness of eroded tooth enamel. Forty incisive bovines were selected and sectioned to obtain specimens of 4mm X 4mm, resulting in a surface area of 16,00mm², with a thickness of 2.50mm. The specimens were immersed in lemon juice, twice a day, over 5 days, and randomly divided into the following 4 groups: G1 = No treatment; G2 = 1.23% APF; G3 = Fluoride Varnish 5% and G4 = Regenerated. The surface roughness of the specimens was analyzed by means of confocal laser scanning microscopy. The obtained data were submitted to ANOVA after attend the homogeneity (Levene´s) and normality tests (Kolmogorov-Smirnov). All tests were statistically significant at 5% (α=0.05). The results showed that there was no statistically significant difference on the enamel roughness surface area between groups in the experimental region and the founded values were higher at the experimental when compared to the control region, however, without differences between the groups in each region. It was concluded that the remineralizing agents were not able to reduce the surface roughness of the studied groups.   Keywords: Tooth Erosion. Dental Enamel. Fluorine. Tooth Remineralization. Resumo O objetivo deste estudo in vitro foi avaliar a influência de agentes remineralizantes na rugosidade da superficial do esmalte dental erodido. Quarenta bovinos incisivos foram selecionados e seccionados para obter espécimes de 4 mm x 4 mm, resultando em uma área superficial de 16,00 mm², com espessura de 2,50 mm. As amostras foram imersas em suco de limão, duas vezes ao dia, durante 5 dias, e divididas aleatoriamente nos 4 grupos seguintes: G1 = Sem tratamento; G2 = Flúor gel 1,23%; G3 = Verniz fluoretado 5% e G4 =Regenerate. A rugosidade superficial das amostras foi analisada por microscopia confocal de varredura a laser. Os dados obtidos foram submetidos à ANOVA após os testes de homogeneidade (Levene) e normalidade (Kolmogorov-Smirnov). Todos os testes foram estatisticamente significantes a 5% (α = 0,05). Os resultados mostraram que não houve diferença estatisticamente significante na rugosidade de área do esmalte entre os grupos na região experimental e os valores encontrados foram maiores na experimental quando comparados à região controle, no entanto, sem diferenças entre os grupos em cada região. Concluiu-se que os remineralizantes não foram capazes de reduzir a rugosidade da superfície dos grupos estudados. Palavras-chave: Erosão Dentária. Esmalte dentário. Flúor. Remineralização Dentária.

Influence of Er,Cr:Ysgg Associated or not To 5% Fluoride Varnish in the Erosion Treatment of Bovine Enamel

AbstractThe objective of this in vitro study was to evaluate the influence of the Er,Cr:YSGG laser associated or not to a desensitizing agent in the treatment of erosive lesions. Forty specimens with dimensions of 4mm x 4mm and 3mm thickness were divided into 4 groups (n = 10): G1- no treatment; G2- 5% fluoride varnish; G3- Er,Cr: YSGG; G4 - fluoride varnish + laser. The specimens were immersed in erosive drink 3 times a day for 1 minute with an average interval of 2 hours between cycles for a period of 10 days. The treatments were performed according to the groups and the surface roughness and the wear profile were analyzed by scanning confocal microscopy. The normality (Kolmogorov-Smirnov) and homogeneity (Levene's) of the tests were evaluated. After these analyzes, the surface roughness data were submitted to the statistical analysis of Variance Analysis (ANOVA). All tests adopted a significance level of 5% (α = 0.05). At the representative images of the wear profile, the morphology of bovine dental enamel in its control and eroded areas were compared and qualitatively discussed. As regard surface roughness, there was no statistically significant difference between the groups. The qualitative analysis of the loss of volume showed that all experimental groups showed significant superficial morphology differences. Considering the limitations of an in vitro study, it can be concluded that the treatments performed were not able to treat dental erosion satisfactorily, indicating the need for more treatment sessions. Keywords: Tooth Erosion. Dental Enamel. Fluoride. YSGG Laser. ResumoO objetivo desse estudo in vitro foi avaliar a influência do laser Er,Cr:YSGG associado ou não a um agente dessensibilizante no tratamento de lesões erosivas. Foram confeccionados 40 espécimes com dimensões de 4mm x 4mm e 3mm de espessura, divididos em 4 grupos (n=10): G1- nenhum tratamento; G2- verniz fluoretado 5%; G3- aplicação do laser Er,Cr:YSGG; G4- verniz fluoretado + laser. Os espécimes foram imersos em bebida erosiva, 3 vezes por dia, durante 1 minuto, com intervalo médio de 2 horas entre os ciclos, por um período de 10 dias. Os tratamentos foram realizados de acordo com os grupos e que foram analisados a rugosidade superficial e o perfil de desgaste por meio de microscopia confocal de varredura. Avaliou-se a normalidade (Kolmogorov-Smirnov) e homogeneidade (Levene’s) dos dados. Após estas análises, os dados de rugosidade superficial foram submetidos ao teste estatístico de Análise de Variância (ANOVA). Todos os testes adotaram nível de significância de 5% (α=0,05). Através da obtenção das imagens representativas do perfil desgaste, a morfologia do esmalte dental bovino em suas áreas controle e erodida foram comparadas e qualitativamente discutidas. Quanto à rugosidade superficial, não houve diferença estatisticamente significativa entre os grupos. A análise qualitativa da perda de volume mostrou que todos os grupos experimentais apresentaram diferenças significativas na morfologia superficial. Considerando as limitações de um estudo in vitro pode-se concluir que os tratamentos realizados não foram capazes de tratar a erosão dentária de forma satisfatória, indicando a necessidade de mais sessões de tratamento. Palavras-chave: Erosão dentária. Esmalte dental. Flúor. Laser de YSGG.

Influence of Remineralizing Dentifrice in the Treatment of Erosive Enamel Lesions

O objetivo deste trabalho in vitro foi avaliar a influência de diferentes agentes remineralizantes no tratamento de lesões erosivas em esmalte. Foram confeccionados espécimes de 4mmx4mm e 3 mm de espessura a partir da superfície vestibular de incisivos bovinos (n=10) e divididos aleatoriamente em 4 grupos. G1=aplicação do dentifrício remineralizante, G2= aplicação do agente potencializador remineralizante, G3= dentifrício remineralizante + agente potencializador remineralizante, G4=aplicação de verniz fluoretado (controle positivo), G5=nenhum tratamento (controle negativo). Os espécimes foram imersos em refrigerante durante um período de 10 dias. A rugosidade superficial foi analisada por meio de microscopia confocal de varredura a laser. Os dados foram analisados quanto à homogeneidade (Levene’s) e normalidade (Kolmogorov- Smirnov). Foram realizados testes paramétricos com análise de variância a dois critérios: fator tempo e fator tratamento, e pós-teste de Tukey para diferenciação das médias. Todos os testes estatísticos tiveram nível de significância de 5% (α=0,05). Os resultados obtidos mostraram diferenças estatisticamente significantes, demonstrando a redução da rugosidade da superfície do esmalte logo após o primeiro tratamento (G3) e para os demais grupos (G1, G2 e G4) somente após o segundo tratamento. Concluiu-se que a utilização de dentifrício composto por silicato de cálcio e fosfato de sódio influenciou na rugosidade do esmalte erodido do dente bovino.Palavras-chave: Dentifrícios. Erosão Dentária. Esmalte Dentário.Abstract The objective of this in vitro study was to evaluate the influence of different remineralizing agents in the treatment of enamel erosive lesions. Specimens of 4mmx4mm and 3mm thickness were made from the buccal surface of bovine incisors (n=10) and randomly divided into 4 groups. G1 = application of the remineralizing dentifrice, G2 = application of the remineralizing agent, G3 = remineralizing dentifrice + remineralizing agente, G4 = application of fluoride varnish (positive control), G5 = no treatment Specimens were immersed in refrigerant solution during a period of 10 days. The surface roughness was analyzed by means of confocal laser scanning microscopy. The data were analyzed for homogeneity (Levene's) and normality (Kolmogorov-Smirnov). Parametric tests with analysis of variance were performed on two criteria: time factor and treatment factor, and Tukey post-test for differentiation of means. All tests were statistically significant at 5% (α = 0.05). The results showed statistically significant difference, demonstrating the reduction of surface roughness after the first treatment (G3) and the other groups (G1, G2 and G4) only after the second treatment. It was concluded that the use of dentifrice composed of calcium silicate and sodium phosphate influenced the roughness of the eroded tooth enamel of the bovine tooth.Keywords: Dentifrices. Tooth Erosion. Tooth Enamel.

Abstract P3-17-05: Claudin-4 expression is associated with disease free survival in breast carcinoma in situ: Mean follow up of 8.2 years

Introduction: Claudins are tight junction molecules that have been associated with breast cancer prognosis. The claudin-low intrinsic subtype of invasive carcinoma was recently described and associated with high grade carcinoma, low junction molecules expression and worse response to chemotherapy. However, it is not known whether the expression of claudins may provide clues as to carcinoma in situ prognosis. The aim of study was evaluate the association between claudin–4 expression and disease-free survival and histologic type of local recurrence in carcinoma in situ after longer follow up.

Methods: A tissue microarray (TMA) block was constructed from 137 pure carcinoma in situ paraffin blocks sampled from patients treated from 1999 to 2009. The TMA was submitted to immunohistochemical staining for claudin-4. A claudin-4 score calculated based on percentage and intensity of expression, categorized samples as: claudin-4-low or claudin–4-high. Clinical data, treatment data, local recurrence data and survival of each patient were reanalyzed from medical records. Kaplan-Meier curves, log-rank and Wilcoxon tests were used to analyze disease-free survival; qui-square and Fisher test were employed to compare others variables; a significance level of 5 % was used.

Results: Claudin-4 expression was evaluated in 86 samples, 88.4% were claudin-4-high and 11.6% claudin-4-low. Mean follow up was 8.2 years ( and local recurrence rate was 10.5 %. There was significant difference in the disease-free survival between claudin-4-high and claudin-4-low (4.9 x 1.9 respectively, p= 0.02); however there was no difference between both in histologic type of recurrence, invasive or in situ (p=0.44).

Conclusion: In our samples, claudin-4-high expression in carcinoma in situ was more frequent than low expression. Our data showed that claudin-4-low expression had a worse prognosis in carcinomas in situ (inferior disease-free survival) but it was similar to claudin-4-high in histologic type of local recurrence.

Citation Format: Duarte GM, Almeida NR, Tocchet F, Espinola J, Pinto T, Barreto CT, Pinto GA, Soares FA, Marshall P, Paiva GR. Claudin-4 expression is associated with disease free survival in breast carcinoma in situ: Mean follow up of 8.2 years [abstract]. In: Proceedings of the 2016 San Antonio Breast Cancer Symposium; 2016 Dec 6-10; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2017;77(4 Suppl):Abstract nr P3-17-05.

Phytate technetium-99m versus dextran 500 technetium-99m in the sentinel lymph node biopsy

PURPOSE

To study which of the two most used radiopharmaceutical drugs for the sentinel lymph node (SLN) biopsy procedure (dextran 500 99mTc and phytate 99mTc) best defines the SLN and migrates less to other lymph nodes.

MATERIAL AND METHODS

Thirty-two rats, separated into two groups, underwent lymphoscintigraphy examination with either dextran or phytate followed by sentinel (popliteal), lumbar, and inguinal lymph node biopsy. Radiation was detected with a gamma probe.

RESULTS

The statistical study indicated count rates significantly higher in the SLN than in the other basins for both the dextran (P<0.01) and phytate groups (P<0.001). There was no statistically significant difference concerning SLN absorption in either group (P=0.2981). In the dextran group, migration occurred to 1.5 lymphatic basins with counting higher than 10% of that found in the SLN versus 0.8 in the phytate group (P=0.0023). Migration was thus higher in the dextran group (P=0.0207).

CONCLUSION

There was no statistically significant difference between dextran and phytate in the SLN identification, but the phytate migrated to fewer lymphatic basins beyond the SLN and with less intensity.

Vertical growth phase and positive sentinel node in thin melanoma

Sentinel node (SN) status is the most important prognostic factor for localized melanoma. Usually, patients with Breslow thickness of less than 1.0 mm are not included in SN protocols. However, the literature presents a rate ranging from 3 to 7% of nodal recurrence in thin melanoma. Ulceration, regression and high mitotic rate have been considered to be indications for an SN biopsy. The metastatic potential of the vertical growth phase is uncertain. To correlate pathological features in thin melanoma with SN metastasis, we reviewed 358 patients submitted to SN biopsy. Seventy-seven patients with lesions of 1 mm or smaller were included in the study group. Histological evaluation of the primary tumor included thickness, Clark level, mitotic rate, ulceration, regression, and growth phase. Lymphoscintigraphy was performed on all patients. Lymphatic mapping and gamma probe detection were both used for SN biopsy. Histological examination of SN consisted of hematoxylin-eosin and immunohistochemical staining. Median follow-up was 37 months. Six patients had micrometastases. Statistical analysis by the Fisher test showed that ulceration (P = 0.019), high mitotic rate (P = 0.008) and vertical growth phase (P = 0.002) were positively correlated with micrometastases. If other studies confirm these results, more melanoma patients must be submitted to SN biopsy.

Antimicrobial peptides from the Brazilian frog Phyllomedusa distincta

Different peptides were purified by chromatographic procedures from the skin-secretory glands of the frog Phyllomedusa distincta. These are the first peptides reported from this frog species. Their primary structure was determined by a combination of automated Edman degradation and mass spectrometry. Peptide Q2 contains 25 amino acid residues, peptide Q1 and L have 28 each, peptide M contains 31, and peptide K has 33 amino acid residues. They all showed potent antimicrobial activity against Gram-negative and Gram-positive bacteria, presenting minimal inhibitory concentrations from 0.6 to 40 microM, when tested against Enterococcus faecalis, Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. Peptides K, L, and Q1 were chemically synthesized and shown to be active.