Japanese consumer categorisation of beef into quality grades, based on Meat Standards Australia methodology

Chinese Consumer Assessment of Australian Sheep Meat Using a Traditional Hotpot Cooking Method

Hotpot is a widely popular cooking method for sheepmeat in China. This study measured the sensory responses of 720 untrained Chinese consumers to Australian sheepmeat cooked using a hotpot technique with methods based on Meat Standards Australia protocols. Shoulder and leg cuts of 108 lambs and 109 yearlings were scored on tenderness, juiciness, flavour and overall liking with linear mixed effects models used to analyse the influence of muscle type and animal factors on these scores. On average, shoulder cuts were more palatable than legs cuts for all sensory traits (p < 0.01) and lambs compared to yearlings (p < 0.05). Intramuscular fat and muscularity were identified as strong drivers of eating quality (p < 0.05), with greater palatability for both cuts as intramuscular fat increased (range 2.5 to 7.5%), and muscularity decreased (as measured through loin weight adjusted for hot carcase weight). Consumers were unable to detect differences between animal sire type and sex in sheepmeat hotpot. These findings suggest shoulder and leg cuts performed comparatively well in hotpot compared to previously tested sheepmeat cooking methods and emphasise the importance of balanced selection for quality and yield traits to ensure that consumer satisfaction is maintained.

French consumer evaluation of eating quality of Angus x Salers beef: Effects of muscle cut, muscle slicing and ageing

Based on the Meat Standards Australia (MSA) methodology, the objectives of this study were to evaluate the eating quality of grass-fed Angus x Salers beef by French consumers, across different muscle cuts (m. triceps brachii caput longum, m. longissimus dorsi et thoracis and m. rectus abdominis), ageing times (5 and 14 days) and muscle slicing and grilling methods (being distinguished by 2 different sides on the grill), and to further quantify whether the MSA model could predict the eating quality of the meat produced by these lean crossbred animals. The results showed that French consumers can discern significant differences in eating quality traits across muscle cuts but not between ageing times and muscle slicing methods. In this study, the accuracy of eating quality score (MQ4)-assigned MSA grade was 64.5%. Due to the lack of MSA data on these lean crossbred animals, the prediction of eating quality from carcass characteristics was less accurate than usual. However, these results do indicate that the MSA sensory testing protocol, the MQ4 calculation and the MSA quality grades could be used to support a consumer-based quality grading system in France.

Composition and taste of beef, pork, and duck meat and bioregulatory functions of imidazole dipeptides in meat

This study quantified the nutritional components and imidazole dipeptide levels of commercially available meats (beef, pork, and duck), and their effects on taste were quantified via taste recognition devices. Although meat and its products are considered high-risk diets, meat components, such as imidazole dipeptides, exert bioregulatory functions. Further, considering their bioregulatory function, commercial meats' antioxidant activity and vascular endothelial function were examined. Characteristic variations in nutritional components were observed depending on the type and part of meat analyzed. These components affected the taste and texture of meat. The main imidazole dipeptides detected were anserine (duck meat) and carnosine (beef and pork). Meat with larger quantities of total imidazole dipeptide demonstrated better sensory test results. Therefore, anserine and carnosine effects on taste were determined using a taste recognition device; carnosine alone produced a noticeably bitter taste, whereas adding anserine reduced bitterness and enhanced umami taste. In a few cases, cooking enhanced the quantity of carnosine and/or anserine and their antioxidant activities. We demonstrated the ability of imidazole dipeptides, particularly anserine, to improve nitric oxide production in vascular endothelial cells. This study provides essential information for health-conscious consumers to develop high-quality, functional meat products.

Transformation of highly marbled meats under various cooking processes

Cooking induces modifications in meat structure and composition, affecting its sensory and nutritional properties. These changes depend on the cooking method and meat characteristics. In the present study, beef were cooked in three different ways-grilling, boiling, and sous-vide cooking-with two endpoint temperatures, 55 °C and 77 °C, to better understand the general impact of cooking on the structure of fatty meat. Light microscopy was used to visualize muscle, connective, and adipose tissues. After cooking, muscle fibers were more compact, which can be attributed to perimysium shrinkage and water transfer, for all cooking processes except grilling at 55 °C. The cross-sectional area of muscle fibers was not impacted by cooking, regardless of the temperature or cooking method. Connective tissue between adipocytes was affected by cooking at 77 °C, but not at 55 °C. Despite the cooking method used, cooking to well-done (77 °C) clearly affected the structure of the perimysium of beef, possibly because of collagen denaturation.

Diversity of Japanese consumers' requirements, sensory perceptions, and eating preferences for meat

Japanese consumers are generally characterized as preferring high marbling in beef and pork and choosing domestic products. However, the Japanese food market is not homogenous. Understanding the diversity of Japanese consumers will provide benefits for the optimization of meat production and distribution in Japan. This article focuses on three factors affecting purchasing decisions and eating satisfaction, namely, requirements, sensory perception, and eating preferences, in order to understand the diversity of Japanese consumers in a simplified manner. Diversity was observed in Japanese consumers in all three of these factors (requirements, perception, and preference) using a questionnaire survey, sensory and biological procedures, and an eating preference test. These diversities are due to not only sociodemographic characteristics but also biological and physiological factors, background culture, and individual attitudes and criteria. Although consumer variation based on sociodemographic characteristics is of course important, it is equally important to understand diversity by focusing on the individual differences among consumers.

Research in Beef Tenderness and Palatability in the Era of Big Data

For decades, research has focused on predicting beef palatability using muscle biochemical traits, and various biomarkers. In these approaches, a precise definition of the variable to predict (tenderness assessed by panelists, untrained consumers, or shear force), and repeatability of the measurements are crucial for creating significant data resources for the derivation of robust predictive models, and rigorous validation testing. This “big data” approach also requires careful definition of traits and transparent principles for data sharing and management. As in other fields, meat science researchers should improve the Findability, Accessibility, Interoperability, and Reuse of data (known as the FAIR principles). Furthermore, with the rapid evolution of new measurement technologies, the traits that they measure must be consistently described, enhancing our ability to integrate these new measurements into existing description systems. For beef, strategic choices have been made in order to consider real consumers’ expectations, not well estimated correctly by lab approaches. This strategy has been successfully developed in Australia, which set up the “Meat Standards Australia” grading scheme, now partly adopted by the beef industry. The ambitions of the International Meat Research 3G Foundation is to develop beef ontology, to set up an international database with a huge number of consumers’ scores related to beef palatability and collected according to standard protocols. The foundation also aims to support the beef industry by offering an international predictive model of beef palatability, flexible enough to take into account any local livestock characteristics or regional consumer specificity. This approach is supported by the United Nations Economic Commission for Europe (UNECE), which is promoting development of regulations and norms, technical cooperation and exchange of best expertise and practices. This will substantially improve the transparency of data flow and price signaling between all participants of the value chain, from beef producers through to consumers at retail.

Influence of Demographic Factors on Sheepmeat Sensory Scores of American, Australian and Chinese Consumers

Along with animal production factors, it is important to understand whether demographic factors influence untrained consumer perceptions of eating quality. This study examined the impact of demographic factors and sheepmeat consumption preferences on eating quality scores of American, Australian and Chinese untrained consumers. M. longissimus lumborum (LL) and m. semimembranosus (SM) were grilled according to sheep Meat Standards Australia protocols and evaluated by 2160 consumers for tenderness, juiciness, flavour and overall liking. Linear mixed effects models were used to analyse the impact of demographic factors and sheepmeat consumption habits on eating quality scores. Consumer age, gender, number of adults in a household and income had the strongest effect on sensory scores (P ≤ 0.05), although, the impact was often different across countries. Frequency of lamb consumption had an impact on sensory scores of American, Australian and Chinese consumers but larger sample sizes in some underrepresented subclasses for Australian and Chinese consumers are needed. Results suggest it is important to balance sensory panels for demographic factors of age, gender, number of adults and income to ensure sensory preferences are accurately represented for these particular populations.

Various Statistical Approaches to Assess and Predict Carcass and Meat Quality Traits

The beef industry is organized around different stakeholders, each with their own expectations, sometimes antagonistic. This article first outlines these differing perspectives. Then, various optimization models that might integrate all these expectations are described. The final goal is to define practices that could increase value for animal production, carcasses and meat whilst simultaneously meeting the main expectations of the beef industry. Different models previously developed worldwide are proposed here. Two new computational methodologies that allow the simultaneous selection of the best regression models and the most interesting covariates to predict carcass and/or meat quality are developed. Then, a method of variable clustering is explained that is accurate in evaluating the interrelationships between different parameters of interest. Finally, some principles for the management of quality trade-offs are presented and the Meat Standards Australia model is discussed. The "Pareto front" is an interesting approach to deal jointly with the different sets of expectations and to propose a method that could optimize all expectations together.

Drivers of Consumer Liking for Beef, Pork, and Lamb: A Review

Tenderness, juiciness, and flavor have been associated with consumer acceptance of beef, lamb, and pork. Drivers of consumer liking are interrelated across these species, but there are differences in consumer preferences. Animal age, animal diet, and subsequent marbling impact consumer liking across species. For beef, consumer research prior to the 1990s showed that tenderness was the main driver of liking. Consumer tenderness and juiciness liking are highly correlated. More recent research has shown that as overall tenderness improved and tenderness variation decreased, flavor has become a more important driver of beef consumer liking. Flavor is affected by consumer preparation methods, familiarity with different flavor presentations, and animal production systems. Animal diet impacts consumer perception of beef tenderness and flavor, especially when comparing forage-fed versus grain-fed beef. Flavor preferences vary across countries more so than preferences for beef based on consumer tenderness preferences and are most likely influenced by the consumption of locally produced beef and the flavor-derived type of beef traditionally consumed. Drivers of pork consumer liking have been shown to be affected by pH, color, water holding capacity, animal diet, and the presence of boar taint compounds. While tenderness and juiciness continue to be drivers of consumer liking for pork, flavor, as impacted by animal diet and the presence of boar taint compounds, continues to be a driver for consumer liking. For lamb, the flavor, as affected by diet, and animal age continue to be the main drivers of consumer liking. Lamb consumers vary across countries based on the level of consumption and preferences for flavor based on cultural effects and production practices.

Assessment of the dynamics of sensory perception of Wagyu beef strip loin prepared with different cooking methods and fattening periods using the temporal dominance of sensations

In this study, we assessed the relative sensory perception of Wagyu beef using temporal dominance of sensations (TDS), which is a dynamic sensory method that captures the "dominance of sensation" throughout food consumption. In addition, we checked the integrity of the TDS by comparing the TDS results with a physicochemical analysis. Strip loins were obtained from 24- and 28-month-old Japanese Black cattle ("Wagyu") and were cooked by grilling (yakiniku) or boiling (shabu-shabu). Temporal dominance of sensations was then used to evaluate the four types of samples. "Tender and/or soft," "juicy," "dry," "fat melting," "fat taste," "umami," "sweet taste," and "butter odor" were dominant in at least one of the sample types, with the yakiniku cooking method highlighting texture- and fat-related sensory characteristics, and the shabu-shabu cooking method highlighting flavor-related sensory characteristics. In addition, beef obtained from the 24-month-old Wagyu was significantly more "dry" than that of the 28-month-old cattle, reflecting their different cooking loss. Temporal dominance of sensations successfully demonstrated the dominant sensory perceptions of Wagyu beef prepared with different cooking methods and fattening periods.

Predicting the Quality of Meat: Myth or Reality?

This review is aimed at providing an overview of recent advances made in the field of meat quality prediction, particularly in Europe. The different methods used in research labs or by the production sectors for the development of equations and tools based on different types of biological (genomic or phenotypic) or physical (spectroscopy) markers are discussed. Through the various examples, it appears that although biological markers have been identified, quality parameters go through a complex determinism process. This makes the development of generic molecular tests even more difficult. However, in recent years, progress in the development of predictive tools has benefited from technological breakthroughs in genomics, proteomics, and metabolomics. Concerning spectroscopy, the most significant progress was achieved using near-infrared spectroscopy (NIRS) to predict the composition and nutritional value of meats. However, predicting the functional properties of meats using this method-mainly, the sensorial quality-is more difficult. Finally, the example of the MSA (Meat Standards Australia) phenotypic model, which predicts the eating quality of beef based on a combination of upstream and downstream data, is described. Its benefit for the beef industry has been extensively demonstrated in Australia, and its generic performance has already been proven in several countries.

Regional, socioeconomic and behavioural- impacts on consumer acceptability of beef in Northern Ireland, Republic of Ireland and Great Britain

This study was commissioned to assess if there are regional differences in the acceptability of beef between consumers from Northern Ireland (NI), Republic of Ireland (ROI) and Great Britain (GB). Palatability traits were affected by socioeconomic and behavioural factors such as preferred cooking endpoint, animal welfare, value, health aspects of beef product, ease of preparation as well as consumption frequency for specific cuts. "Willingness to pay" (WTP) was influenced by income, preferred cooking endpoint, value of beef product, ease of preparation and consumption frequency for frying steak. Results showed that GB consumers scored higher for the same striploin steak compared to NI and ROI consumers. This may be due to differences in the motivation for beef choice and/or consumption habits. GB consumers were less concerned about the healthiness of beef product and beef origin. In addition, a higher consumption frequency for rump was reported in GB, which may explain the higher sensory scores observed among GB consumers for striploins.

Shelf life extension of vacuum packaged chilled beef in the Chinese supply chain. A feasibility study

Arbitrary microbiological limits or noticeable organoleptic decline are mainly used to define the shelf life of vacuum packaged chilled beef (VPCB). Excellent temperature control is critical to enable a long shelf life. The robustness of export supply chains was tested by sending Australian VPCB (striploins) to three Chinese destinations and a CONTROL (Brisbane, Australia) treatment (~-1 °C). Data loggers monitored temperature during storage and meat biochemistry (pH, color, weep), aerobic plate counts, lactic acid bacteria, total volatile basic nitrogen (TVB-N) and sensory changes were measured 84, 98, 120 and 140 days postslaughter. Temperature was generally well maintained and sensory scores were not indicative of spoilage. Microbial counts did not increase from 84 to 140 days, however TVB-N increased with time and was a better predictor of sensory attributes. TVB-N was below the limit of 15 mg/100 g in all CONTROL samples but most Chinese samples exceeded this value. This study demonstrated that extended shelf life is feasible with excellent temperature control.

Current situation and future prospects for beef production in Europe - A review

The European Union (EU) is the world's third largest producer of beef. This contributes to the economy, rural development, social life, culture and gastronomy of Europe. The diversity of breeds, animal types (cows, bulls, steers, heifers) and farming systems (intensive, extensive on permanent or temporary pastures, mixed, breeders, feeders, etc) is a strength, and a weakness as the industry is often fragmented and poorly connected. There are also societal concerns regarding animal welfare and environmental issues, despite some positive environmental impacts of farming systems. The EU is amongst the most efficient for beef production as demonstrated by a relative low production of greenhouse gases. Due to regional differences in terms of climate, pasture availability, livestock practices and farms characteristics, productivity and incomes of beef producers vary widely across regions, being among the lowest of the agricultural systems. The beef industry is facing unprecedented challenges related to animal welfare, environmental impact, origin, authenticity, nutritional benefits and eating quality of beef. These may affect the whole industry, especially its farmers. It is therefore essential to bring the beef industry together to spread best practice and better exploit research to maintain and develop an economically viable and sustainable beef industry. Meeting consumers' expectations may be achieved by a better prediction of beef palatability using a modelling approach, such as in Australia. There is a need for accurate information and dissemination on the benefits and issues of beef for human health and for environmental impact. A better objective description of goods and services derived from livestock farming is also required. Putting into practice "agroecology" and organic farming principles are other potential avenues for the future. Different future scenarios can be written depending on the major driving forces, notably meat consumption, climate change, environmental policies and future organization of the supply chain.

Ossification score is a better indicator of maturity related changes in eating quality than animal age

Ossification score and animal age are both used as proxies for maturity-related collagen crosslinking and consequently decreases in beef tenderness. Ossification score is strongly influenced by the hormonal status of the animal and may therefore better reflect physiological maturity and consequently eating quality. As part of a broader cross-European study, local consumers scored 18 different muscle types cooked in three ways from 482 carcasses with ages ranging from 590 to 6135 days and ossification scores ranging from 110 to 590. The data were studied across three different maturity ranges; the complete range of maturities, a lesser range and a more mature range. The lesser maturity group consisted of carcasses having either an ossification score of 200 or less or an age of 987 days or less with the remainder in the greater maturity group. The three different maturity ranges were analysed separately with a linear mixed effects model. Across all the data, and for the greater maturity group, animal age had a greater magnitude of effect on eating quality than ossification score. This is likely due to a loss of sensitivity in mature carcasses where ossification approached and even reached the maximum value. In contrast, age had no relationship with eating quality for the lesser maturity group, leaving ossification score as the more appropriate measure. Therefore ossification score is more appropriate for most commercial beef carcasses, however it is inadequate for carcasses with greater maturity such as cull cows. Both measures may therefore be required in models to predict eating quality over populations with a wide range in maturity.

Effects of Cooking End-point Temperature and Muscle Part on Sensory 'Hardness' and 'Chewiness' Assessed Using Scales Presented in ISO11036:1994

Texture and ‘tenderness’ in particular, is an important sensory characteristic for consumers’ satisfaction of beef. Objective and detailed sensory measurements of beef texture have been needed for the evaluation and management of beef quality. This study aimed to apply the sensory scales defined in ISO11036:1994 to evaluate the texture of beef. Longissimus and Semitendinosus muscles of three Holstein steers cooked to end-point temperatures of 60°C and 72°C were subjected to sensory analyses by a sensory panel with expertise regarding the ISO11036 scales. For the sensory analysis, standard scales of ‘chewiness’ (9-points) and ‘hardness’ (7-points) were presented to the sensory panel with reference materials defined in ISO11036. As a result, both ‘chewiness’ and ‘hardness’ assessed according to the ISO11036 scales increased by increasing the cooking end-point temperature, and were different between Longissimus and Semitendinosus muscles. The sensory results were in good agreement with instrumental texture measurements. However, both texture ratings in this study were in a narrower range than the full ISO scales. For beef texture, ISO11036 scales for ‘chewiness’ and ‘hardness’ are useful for basic studies, but some alterations are needed for practical evaluation of muscle foods.

Characterization and classification of Japanese consumer perceptions for beef tenderness using descriptive texture characteristics assessed by a trained sensory panel

Meat tenderness is an important characteristic in terms of consumer preference and satisfaction. However, each consumer may have his/her own criteria to judge meat tenderness, because consumers are neither selected nor trained like an expert sensory panel. This study aimed to characterize consumer tenderness using descriptive texture profiles such as chewiness and hardness assessed by a trained panel. Longissimus muscles cooked at four different end-point temperatures were subjected to a trained sensory panel (n=18) and consumer (n=107) tenderness tests. Multiple regression analysis showed that consumer tenderness was characterized as 'low-chewiness and low hardness texture.' Subsequently, consumers were divided into two groups by cluster analysis according to tenderness perceptions in each participant, and the two groups were characterized as 'tenderness is mainly low-chewiness' and 'tenderness is mainly low-hardness' for tenderness perception, respectively. These results demonstrate objective characteristics and variability of consumer meat tenderness, and provide new information regarding the evaluation and management of meat tenderness for meat manufacturers.

Modelling of beef sensory quality for a better prediction of palatability

Despite efforts by the industry to control the eating quality of beef, there remains a high level of variability in palatability, which is one reason for consumer dissatisfaction. In Europe, there is still no reliable on-line tool to predict beef quality and deliver consistent quality beef to consumers. Beef quality traits depend in part on the physical and chemical properties of the muscles. The determination of these properties (known as muscle profiling) will allow for more informed decisions to be made in the selection of individual muscles for the production of value-added products. Therefore, scientists and professional partners of the ProSafeBeef project have brought together all the data they have accumulated over 20 years. The resulting BIF-Beef (Integrated and Functional Biology of Beef) data warehouse contains available data of animal growth, carcass composition, muscle tissue characteristics and beef quality traits. This database is useful to determine the most important muscle characteristics associated with a high tenderness, a high flavour or generally a high quality. Another more consumer driven modelling tool was developed in Australia: the Meat Standards Australia (MSA) grading scheme that predicts beef quality for each individual muscle×specific cooking method combination using various information on the corresponding animals and post-slaughter processing factors. This system has also the potential to detect variability in quality within muscles. The MSA system proved to be effective in predicting beef palatability not only in Australia but also in many other countries. The results of the work conducted in Europe within the ProSafeBeef project indicate that it would be possible to manage a grading system in Europe similar to the MSA system. The combination of the different modelling approaches (namely muscle biochemistry and a MSA-like meat grading system adapted to the European market) is a promising area of research to improve the prediction of beef quality. In both approaches, the volume of data available not only provides statistically sound correlations between various factors and beef quality traits but also a better understanding of the variability of beef quality according to various criteria (breed, age, sex, pH, marbling etc.).