DETECTION OF BACILLUS CEREUS CONTAINING VOITOXIN IN FOOD BY LOOP-MEDIATED ISOTHERMAL AMPLIFICATION METHOD

A rapid and ultrasensitive paper sensor for Bacillus cereus Haemolysin BL detection

Bacillus cereus is a foodborne opportunistic pathogen commonly found in humans and animals. It produces various toxins, causing frequent food safety incidents. Therefore, establishing a fast and accurate method for detecting B. cereus enterotoxin is crucial for disease diagnosis and food safety. In this study, Haemolysin BL comprising Hbl B and L2 was obtained from a prokaryotic expression system and then used to immunize mice for antibody preparation. Paired antibodies 2A10-5C7 against Hbl B and 1E2-10A4 against Hbl L2 were screened using the chessboard method and then used to construct a double-antibody sandwich detection method and a lateral flow immunochromatographic assay (LFIA) to quantify the concentrations of Hbl B and L2 in PBS and milk. The limits of detection for Hbl B and L2 in milk were 0.74 ng mL-1 and 1 ng mL-1 with detection ranges of 1.48-645.5 ng mL-1 and 2.33-391.5 ng mL-1. The spiked recoveries ranged from 82.2% to 105.67% and there was no cross-reactivity with common microbial toxins. The established LFIA was low in cost and rapid and was comparable with commercially available detection kits for food samples.

Universal and Naked-Eye Diagnostic Platform for Emetic Bacillus cereus Based on RPA-Assisted CRISPR/Cas12a

Emetic Bacillus cereus (B. cereus), which can cause emetic food poisoning and in some cases even fulminant liver failure and death, has aroused widespread concern. Herein, a universal and naked-eye diagnostic platform for emetic B. cereus based on recombinase polymerase amplification (RPA)-assisted CRISPR/Cas12a was developed by targeting the cereulide synthetase biosynthetic gene (cesB). The diagnostic platform enabled one-pot detection by adding components at the bottom and cap of the tube separately. The visual limit of detection of RPA-CRISPR/Cas12a for gDNA and cells of emetic B. cereus was 10-2 ng μL-1 and 102 CFU mL-1, respectively. Meanwhile, it maintained the same sensitivity in the rice, milk, and cooked meat samples even if the gDNA was extracted by simple boiling. The whole detection process can be finished within 40 min, and the single cell of emetic B. cereus was able to be recognized through enrichment for 2-5 h. The good specificity, high sensitivity, rapidity, and simplicity of the RPA-assisted CRISPR/Cas12a diagnostic platform made it serve as a potential tool for the on-site detection of emetic B. cereus in food matrices. In addition, the RPA-assisted CRISPR/Cas12a assay is the first application in emetic B. cereus detection.

Rapid Detection of Hepatitis A Virus in Foods Using a Bioluminescent Assay in Real-Time (BART) and Reverse Transcription Loop-Mediated Isothermal Amplification (RT-LAMP) Technology

Foodborne hepatitis A infections have been considered as a major threat for public health worldwide. Increased incidences of hepatitis A virus (HAV) infection has been associated with growing global trade of food products. Rapid and sensitive detection of HAV in foods is very essential for investigating the outbreaks. Real-time RT-PCR has been most widely used for the detection of HAV by far. However, the technology relies on fluorescence determination of the amplicon and requires sophisticated, high-cost instruments and trained personnel, limiting its use in low resource settings. In this study, a robust, affordable, and simple assay, reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay in combination with a bioluminescence-based determination of amplification in real-time (BART), was developed for the detection of HAV in different food matrices, including green onion, strawberry, mussel, and milk. The efficiencies of a one-step RT-LAMP-BART and a two-step RT-LAMP-BART were investigated for the detection of HAV in different food matrices and was compared with that of real-time RT-PCR. The sensitivity of the RT-LAMP-BART assay was significantly affected by Mg²⁺ concentration (P < 0.05), in addition to primer quality. The optimal Mg²⁺ concentration was 2 mM for one-step RT-LAMP-BART and 4 mM for two-step RT-LAMP-BART. Compared with cartridge-purified primers, HPLC-purified primers could greatly improve the sensitivity of the RT-LAMP-BART assay (P < 0.05). For detecting HAV in different food matrices, the performance of two-step RT-LAMP-BART was comparable with that of real-time RT-PCR and was better than that of one-step RT-LAMP-BART. The detection limit of the two-step RT-LAMP-BART for HAV in green onion, strawberry, mussel, and milk was 8.3 × 10⁰ PFU/15 g, 8.3 × 10¹ PFU/50 g, 8.3 × 10⁰ PFU/5 g, and 8.3 × 10⁰ PFU/40 mL, respectively. The developed RT-LAMP-BART was an effective, simple, sensitive, and robust method for foodborne HAV detection.

Establishment and Validation of a Two-Step LAMP Assay for Detection of Bacillus cereus-Group Isolates in Food and Their Possibility of Non-haemolytic Enterotoxin Production

The closely related members of the Bacillus cereus-group can mainly only be differentiated by whole genome sequencing. Among them, there are potentially toxin-producing bacteria. When consumed with food, these can cause vomiting or diarrhea and abdominal cramps. To date, although no EU-wide threshold exists, a bacterial count of 105 CFU/g can be regarded as critical. Specific and rapid detection of the bacteria is difficult due to their close relationship, and no loop-mediated isothermal amplification (LAMP) assay has been developed so far to detect potentially toxin-producing members of the B. cereus-group. Aim of this study was to develop a LAMP method to detect critical cell counts specifically and rapidly of potentially non-haemolytic enterotoxin (NHE)-producing cells of this group. A two-step LAMP assay was developed. First, the target sequence groEL was used to determine the representatives of the B. cereus-group. Second, since bacteria in which nheB is present are basically capable of producing enterotoxins, this gene was chosen for detection. The specificity of the developed assay was 100% for B. cereus-group isolates and 93.7% for the detection of nheB. The analytical sensitivity was 0.1 pg DNA/μl. Using simplified DNA extraction by boiling, cell-based sensitivity was determined. Targeting groEL and nheB, 11.35-27.05 CFU/reaction and 11.35-270.5 CFU/reaction were detectable, respectively. Artificially contaminated samples were investigated to prove the application in foods. Direct detection of the critical value of B. cereus-group cells was possible in 83.3% of samples and detecting the toxin-gene 50% thereof. After a 6-h incubation period, the detection rate increased to 100 and 91.7%, respectively. Additionally, 100 natively contaminated food samples were tested, also quantitatively and culturally. Samples with relevant contamination levels were reliably detected using groEL-LAMP. After a 6-h incubation period, isolates bearing the toxin gene nheB could also be reliably detected. In addition, colony material was boiled and used as a LAMP template for simple detection. Specificity for the B. cereus-group was 100 and 93.22% detecting nheB. The study demonstrated that screening of food samples with the groEL/nheB-LAMP assay can be performed within 1 day, making it possible to detect critical levels of potentially NHE-toxin-producing cells of the B. cereus-group.

Rapid and simple detection of Bacillus cereus in milk by real-time competitive annealing mediated isothermal amplification

Bacillus cereus (B. cereus) is widespread in nature and considered an important foodborne pathogen, which can lead to emetic syndrome and diarrheal illness. Therefore, appropriate detection methods are needed to effectively monitor this pathogenic bacterium. Competitive annealing mediated isothermal amplification (CAMP) is a novel nucleic-acid-based detection technology that amplifies DNA with high sensitivity and specificity under isothermal conditions. The aim of this study was to develop a real-time CAMP assay for the rapid and simple detection of B. cereus in milk. In this system, a pair of primers was designed to specifically target the entFM gene of B. cereus. Compared with the conventional PCR method, the CAMP assay has higher sensitivity, the same specificity and shorter detection time. The detection limits of the CAMP assay for pure bacterial cultures and artificially contaminated milk samples were all 59 CFU mL^-1. And this detection method showed a wide linear range (from 5.9 × 10⁵ to 59 CFU mL^-1) and satisfactory recovery values (from 75.76% to 106.78%). These results indicate that the developed CAMP assay is a potentially useful method for the detection of B. cereus in milk.

Efficient and Specific Detection of Salmonella in Food Samples Using a stn-Based Loop-Mediated Isothermal Amplification Method

The Salmonella enterotoxin (stn) gene exhibits high homology among S. enterica serovars and S. bongori. A set of 6 specific primers targeting the stn gene were designed for detection of Salmonella spp. using the loop-mediated isothermal amplification (LAMP) method. The primers amplified target sequences in all 102 strains of 87 serovars of Salmonella tested and no products were detected in 57 non-Salmonella strains. The detection limit in pure cultures was 5 fg DNA/reaction when amplified at 65°C for 25 min. The LAMP assay could detect Salmonella in artificially contaminated food samples as low as 220 cells/g of food without a preenrichment step. However, the sensitivity was increased 100-fold (~2 cells/g) following 5 hr preenrichment at 35°C. The LAMP technique, with a preenrichment step for 5 and 16 hr, was shown to give 100% specificity with food samples compared to the reference culture method in which 67 out of 90 food samples gave positive results. Different food matrixes did not interfere with LAMP detection which employed a simple boiling method for DNA template preparation. The results indicate that the LAMP method, targeting the stn gene, has great potential for detection of Salmonella in food samples with both high specificity and high sensitivity.