Comparison of five membrane filters to collect bioaerosols for airborne microbiome analysis

Airborne microbes: sampling, detection, and inactivation

The human living environment serves as a habitat for microorganisms and the presence of ubiquitous airborne microbes significantly impacts the natural material cycle. Through ongoing experimentation with beneficial microorganisms, humans have greatly benefited from airborne microbes. However, airborne pathogens endanger human health and have the potential to induce fatal diseases. Tracking airborne microbes is a critical prerequisite for a better understanding of bioaerosols, harnessing their potential advantages, and mitigating associated risks. Although technological breakthroughs have enabled significant advancements in accurately monitoring airborne pathogens, many puzzles about these microbes remain unanswered due to their high variability and environmental diffusibility. Consequently, advanced techniques and strategies for special identification, early warning, and efficient eradication of microbial contamination are continuously being sought. This review presents a comprehensive overview of the research status of airborne microbes, concentrating on the recent advances and challenges in sampling, detection, and inactivation. Particularly, the fundamental design principles for the collection and timely detection of airborne pathogens are described in detail, as well as critical factors for eliminating microbial contamination and enhancing indoor air quality. In addition, future research directions and perspectives for controlling airborne microbes are also suggested to promote the translation of basic research into real products.

Versatile filter membrane for effective sampling and real-time quantitative detection of airborne pathogens

Construction of air filter membranes bearing prominent collecting and transferring capability is highly desirable for detecting airborne pathogens but remains challenging. Here, a hyaluronic acid air filter membrane (HAFM) with tunable heterogeneous micro-nano porous structures is straightforwardly constructed through the ethanol-induced phase separation strategy. Airborne pathogens can be trapped and collected by HAFM with high performance due to the ideal trade-off between removal efficiency and pressure drop. By exempting the sample elution and extraction processes, the HAFM after filtration sampling can not only directly disperse on the agar plate for colony culture but also turn to an aqueous solution for centrifugal enrichment, which significantly reduces the damage and losses of the captured microorganisms. The following combination with ATP bioluminescence endows the HAFM with a real-time quantitative detection function for the captured airborne pathogens. Benefiting from high-efficiency sampling and non-traumatic transfer of airborne pathogens, the real-world bioaerosol concentration can be facilely evaluated by the HAFM-based ATP assay. This work thus not only provides a feasible strategy to fabricate air filter membranes for efficient microbial collection and enrichment but also sheds light on designing advanced protocols for real-time detection of bioaerosols in the field.

AirDNA sampler: An efficient and simple device enabling high-yield, high-quality airborne environment DNA for metagenomic applications

Analyzing temporal and spatial distributions of airborne particles of biological origins is vital for the assessment and monitoring of air quality, especially with regard to public health, environmental ecology, and atmospheric chemistry. However, the analysis is frequently impeded by the low levels of biomass in the air, especially with metagenomic DNA analysis to explore diversity and composition of living organisms and their components in the air. To obtain sufficient amounts of metagenomic DNA from bioaerosols, researchers usually need a long sampling time with an expensive high-volume air sampler. This work shows the utilization of an air sampling device containing an economical, high-volume portable ventilation fan in combination with customized multi-sheet filter holders to effectively obtain high yields of genomic DNA in a relatively short time. The device, named 'AirDNA' sampler, performed better than other commercial air samplers, including MD8 Airport and Coriolis compact air samplers. Using the AirDNA sampler, an average DNA yield of 40.49 ng (12.47-23.24 ng at 95% CI) was obtained in only 1 hour of air sampling with a 0.85 probability of obtaining ≥10 ng of genomic DNA. The genomic DNA obtained by the AirDNA system is of suitable quantity and quality to be further used for amplicon metabarcoding sequencing of 16S, 18S, and cytochrome c oxidase I (COI) regions, indicating that it can be used to detect various prokaryotes and eukaryotes. Our results showed the effectiveness of our AirDNA sampling apparatus with a simple setup and affordable devices to obtain metagenomic DNA for short-term or long-term spatiotemporal analysis. The technique is well suited for monitoring air in built environments, especially monitoring bioaerosols for health purposes and for fine-scale spatiotemporal environmental studies.

Rapid detection of live bacteria in water using nylon filter membrane-integrated centrifugal microfluidics

Water is one of the most indispensable elements for human beings. People can live without food for a couple of weeks but cannot live without water for a couple of days. Unfortunately, drinking water is not always safe around the world; in many areas, the water for drinking could be contaminated with various microbes. However, the total viable microbe count in water still relies on culture-based methods in laboratories. Therefore, in this work, we report a novel, simple, and highly efficient strategy to detect live bacteria in water via a nylon membrane-integrated centrifugal microfluidic device. A handheld fan and a rechargeable hand warmer were utilized as the centrifugal rotor and the heat resource for reactions, respectively. The bacteria in water can be rapidly concentrated >500-fold by our centrifugation system. After incubation with water-soluble tetrazolium-8 (WST-8), the color change of the nylon membranes can be visually interpreted directly by the naked eye or recorded with a smartphone camera. The whole process can be finished in 3 h, and the detection limit can reach 10² CFU/mL. The detection range ranges from 10² CFU/mL to 10⁵ CFU/mL. The cell counting results of our platform are highly positively correlated with the results of cell counting by the conventional lysogeny broth (LB) agar plate approach or the commercial 3 M Petrifilm™ cell counting plate. Our platform provides a convenient and sensitive strategy for rapid monitoring. We highly anticipate that this platform can improve water quality monitoring in resource-poor countries in the near future.

Mixed cellulose ester membrane as an ion redistributor to stabilize zinc anode in aqueous zinc ion batteries

Aqueous zinc-ion batteries (AZBs) with high energy density, low cost and environmental characteristics, have become the promising device for energy storage. However, uncontrolled zinc dendrite growth remains an impediment to the popularization of AZBs. The unrestricted two-dimensional (2D) ions diffusion is the main cause of the above defect. In this work, mixed cellulose ester (MCE) membrane is proposed as the separator. A dense homogeneous pore structure can achieve a physical shunting effect on ion diffusion, which can control and homogenize the ion motion. Further, the mechanism of this physical pore effect is confirmed by comparing the behavior of Zn deposition in MCE systems with different pore sizes but the same composition. As conjectured, a membrane with a smaller pore size is more favorable. In addition, the MCE contains many polar oxygen-containing functional groups that can facilitate and modulate ion diffusion through coordination. This chemical ion guiding effect, together with the above physical pore effect, gives the separator the ability to suppress dendrite formation. Zn/Zn symmetric cells with this membrane exhibit ultralong cycle life exceeding 1250 h at 0.5 mA cm^-2 and 1000 h at 5 mA cm^-2. And the Zn//MnO₂ battery presents excellent cycle stability for more than 500 cycles with a capacity retention of 90.67%. This work proposes MCE separators and reveals their coordinated regulation of physical and chemical effects on metal-based anodes. This will shed light on the development of high-performance separators and AZBs.

An Optimized Active Sampling Procedure for Aerobiological DNA Studies

The Earth's atmosphere plays a critical role in transporting and dispersing biological aerosols. Nevertheless, the amount of microbial biomass in suspension in the air is so low that it is extremely difficult to monitor the changes over time in these communities. Real-time genomic studies can provide a sensitive and rapid method for monitoring changes in the composition of bioaerosols. However, the low abundance of deoxyribose nucleic acid (DNA) and proteins in the atmosphere, which is of the order of the contamination produced by operators and instruments, poses a challenge for the sampling process and the analyte extraction. In this study, we designed an optimized, portable, closed bioaerosol sampler based on membrane filters using commercial off-the-shelf components, demonstrating its end-to-end operation. This sampler can operate autonomously outdoors for a prolonged time, capturing ambient bioaerosols and avoiding user contamination. We first performed a comparative analysis in a controlled environment to select the optimal active membrane filter based on its ability to capture and extract DNA. We have designed a bioaerosol chamber for this purpose and tested three commercial DNA extraction kits. The bioaerosol sampler was tested outdoors in a representative environment and run for 24 h at 150 L/min. Our methodology suggests that a 0.22-µm polyether sulfone (PES) membrane filter can recover up to 4 ng of DNA in this period, sufficient for genomic applications. This system, along with the robust extraction protocol, can be automated for continuous environmental monitoring to gain insights into the time evolution of microbial communities within the air.

Candida auris, a singular emergent pathogenic yeast: its resistance and new therapeutic alternatives

Nowadays, fungal infections affect millions of people across the world. Candida auris, a new emergent yeast, is a worrisome pathogen because it associates with a high rate of incidence and prevalence, including in the nosocomial environment. The hard identification, the phenotypic plasticity, and the easy adaptation to stressful conditions are some of the C. auris traits that render this latest yeast singular challenging. C. auris infections have already been reported from more than 30 countries and are associated with high mortality rates. This is the result from rapid transmission and the difficulty of prevention, control, and eradication. There are several factors related to the high virulence of C. auris, such as the multidrug resistance, biofilm development, and the ability to escape the response of the innate immune system. So, C. auris infections are a serious and alarming problem, not only because of the high pathogenicity of the fungal agent but also because of the low effectiveness of the treatments available. Although new formulations have been developed against C. auris strains, a better understanding is essential to efficiently treat, prevent, and control C. auris infections.

Critical review of antibiotic resistance genes in the atmosphere

We conducted a critical review to establish what is known about the sources, characteristics, and dissemination of ARGs in the atmosphere. We identified 52 papers that reported direct measurements of bacterial ARGs in air samples and met other inclusion criteria. The settings of the studies fell into the following categories: urban, rural, hospital, industrial, wastewater treatment plants (WWTPs), composting and landfill sites, and indoor environments. Certain genes were commonly studied and generally abundant: sul1, intI1, β-lactam ARGs, and tetracycline ARGs. Abundances of total ARGs varied by season and setting, with air in urban areas having higher ARG abundance than rural areas during the summer and vice versa during the winter. There was greater consistency in the types and abundances of ARGs throughout the seasons in urban areas. Human activity within indoor environments was also linked to increased ARG content (abundance, diversity, and concentration) in the air. Several studies found that human exposure to ARGs through inhalation was comparable to exposure through drinking water or ingesting soil. Detection of ARGs in air is a developing field, and differences in sampling and analysis methods reflect the many possible approaches to studying ARGs in air and make direct comparisons between studies difficult. Methodologies need to be standardized to facilitate identification of the dominant ARGs in the air, determine their major sources, and quantify the role of atmospheric transport in dissemination of ARGs in the environment. With such knowledge we can develop better policies and guidelines to limit the spread of antimicrobial resistance.

Seasonal taxonomic composition of microbial communal shaping the bioaerosols milieu of the urban city of Lanzhou

Here, the taxonomical composition and seasonal dynamics of airborne microbial communities were described in the urban city of Lanzhou, Northwest China. Year-long samples were studied in two filter membranes (Quartz and PTFE). Higher microbial loads were reported in the PTFE than in the quartz filter. Onefold decrease was reported in bacterial loads in spring and summer than winter and autumn for both filters. The fungal loadings were lowest during winter and highest during autumn, followed by summer. The microbial communities included Actinobacteria and Proteobacteria, Ascomycota, and Basidiomycota as major components. Maximum abundance of the members from Gammaproteobacteria, Coriobacteria and Clostridia were studied in all seasons on PTFE membrane, followed by, Erysipelotrichia, Negativicutes and Fusobacteria. Members of Actinobacteria and Bacilli showed higher abundance in spring and winter, with a small proportion during autumn. Members of Clostridia, Gammaproteobacteria, Bacilli, and Actinobacteria showed maximum abundance on the quartz filter in all the seasons. Similarly, on the PTFE, fungi including Dothideomycetes and Agaricomycetes were dominant, followed by Saccharomycetes during summer and winter. The result showed that PM_2.5, SO₄^2-, NO₂^-, Na⁺, EC, and OC are important environmental parameters influencing the seasonal microbial community. However, the relation of the microbiome with the environment cannot be confidently defined because the environmental factors are changeable and yet interrelated.

Biosensor detection of airborne respiratory viruses such as SARS-CoV-2

Airborne SARS-CoV-2 transmission represents a significant route for possible human infection that is not yet fully understood. Viruses in droplets and aerosols are difficult to detect because they are typically present in low amounts. In addition, the current techniques used, such as RT-PCR and virus culturing, require large amounts of time to get results. Biosensor technology can provide rapid, handheld, and point-of-care systems that can identify virus presence quickly and accurately. This paper reviews the background of airborne virus transmission and the characteristics of SARS-CoV-2, its relative risk for transmission even at distances greater than the currently suggested 6 feet (or 2 m) physical distancing. Publications on biosensor technology that may be applied to the detection of airborne SARS-CoV-2 and other respiratory viruses are also summarized. Based on the current research we believe that there is a pressing need for continued research into handheld and rapid methods for sensitive collection and detection of airborne viruses. We propose a paper-based microfluidic chip and immunofluorescence assay as one method that could be investigated as a low-cost and portable option.