Composite veneers: The direct-indirect technique revisited

Repeatability of different mobile phone applications for color measurement in dentistry

PURPOSE

To assess the repeatability of various color-measuring mobile phone applications (MPAs) on dental materials in clinically relevant shades in 1-mm thickness.

MATERIALS AND METHODS

A benchtop spectrophotometer was used as a reference instrument. Seven MPAs were used: Color Analysis, Color Analyzer-Iro Shirabe, Color Grab, and Colorimeter from Android, and Color Analyzer-Iro Shirabe, ColorMeter RGB, and Optishade from iOS. Color measurements were performed on 1-mm thickness slices of CAD-CAM materials, Vita Enamic shades 1M2, 2M2, 3M2, 4M2, and Vitablocs Mark II shades A1C, A2C, A3C, A4C (n = 10, for a total 80 specimens). The specimens were measured at three time periods, Day 0, Day 1, and Day 7, and three measurements were made on each day, to mimic short-, medium-, and long-term repeatability. The color differences were analyzed using the CIEDE2000 formula, with the corresponding color difference (ΔE00), and mean color difference from the mean (MCDM00). One-way ANOVA, Repeated measures ANOVA, and Paired sample t-tests were used for statistical analysis.

RESULTS

Optishade from iOS showed the lowest mean color difference among the MPAs (ΔE00 = 0.2 (SD 0.1), 0.3 (SD 0.2), and 0.2 (SD 0.1) at Day 0, 1, and 7, respectively, and ΔE00 = 0.5 (SD 0.3) for all three periods Days 0-1, 0-7, and 1-7). Material-dependent variations in the repeatability of color measurements were observed.

CONCLUSION

There was a statistically significant difference among color measurements using MPAs and a spectrophotometer, among the MPAs, and materials. The spectrophotometer exhibited the highest repeatability across the tested time periods. The iOS Optishade showed the highest repeatability among the MPAs.

Ceramic partial laminate veneers in anterior teeth: A literature review

STUDY SELECTION

Partial laminate veneers, defined as small ceramic restorations adhesively luted onto unprepared anterior teeth, are an interesting and conservative alternative to conventional ceramic and composite resin veneers in the anterior region. This literature review aimed to summarize the available laboratory and clinical data on ceramic partial laminate veneers. An electronic search of the MEDLINE/PubMed, EBSCO, and Web of Science databases was conducted. The keywords used were "partial veneer," "partial laminate veneer," "ceramic fragment," and "sectional veneer." The Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines were followed. The risk of bias in the included studies was assessed using the QUIN tool.

RESULTS

Of the 266 identified articles, only 16 met the inclusion criteria (ten clinical reports, five laboratory studies, and one retrospective clinical study). To date, no randomized controlled clinical trials have been conducted. Most laboratory studies displayed a low risk of bias, with partial laminate veneers rendering adequate strength and color stability. Clinical reports have shown large variability in material selection, luting, and finishing/polishing protocols.

CONCLUSIONS

Low-quality evidence is available for ceramic partial laminate veneers. Available data from laboratory studies suggest good mechanical and optical performances comparable to those of conventional ceramic and composite resin veneers. Further clinical studies with longer follow-up periods are warranted.

Semidirect Resin Composite Veneers in a Patient with Bruxism

This case report details the esthetic rehabilitation of a 32-year-old male patient suffering from sleep bruxism, primarily manifesting as a fracture and significant loss of tooth structure in the anterior maxillary central incisors. To address these concerns, the patient underwent a restorative treatment involving the application of semidirect resin composite veneers on the maxillary incisors and direct resin composite restoration on the incisal regions of the maxillary canines. This approach not only restored the functional integrity of the teeth but also significantly enhanced the patient's esthetic appearance.

Polychromatic Restoration of Anterior Fractured Teeth Using a Custom-made Silicone Matrix

When restoring anterior teeth using resin composites, the use of silicone guide matrices obtained from diagnostic wax-ups is recommended, as this technique facilitates layering and optimizes working time. This is particularly important in polychromatic layering and when more than one anterior tooth is to be restored with resin composites. However, in cases of fractured anterior teeth, it is often not feasible to perform a previous impression and waxing. In these cases, due to trauma and related psychological aspects, patients usually seek immediate esthetic solutions. Therefore, an interesting restorative approach that can simplify the restorative technique is the creation of a silicone guide matrix obtained from the patient's fractured tooth, without the need for prior waxing. This type of personalized matrix was initially proposed by Bertholdo, Ricci, and Barrote. Thus, the purpose of the present work is to demonstrate a modification of the technique for making this type of custom-made matrix for the restoration of two upper central incisors of a 14-year-old patient who fractured his teeth in a bicycle accident.

Effect of four different mono and multi-wave light-curing units on the Knoop hardness of veneer resin composites

OBJECTIVES

To evaluate the effect of mono and multi-wave light-curing units (LCUs) on the Knoop hardness of resin-based composites (RBC) that use different photoinitiators.

METHODS

Central incisor-shaped specimens 12 mm long, 9 mm wide, and 1.5 mm thick were made from 2 RBCs that use different photoinitiators: Tetric N-Ceram (Ivoclar Vivadent) - and Vittra APS (FGM), both A2E shade. They were light-cured with 4 different LCUs: two claimed to be multi-wave - VALO Grand (Ultradent) and Emitter Now Duo (Schuster); and two were monowave - Radii Xpert (SDI) and Elipar DeepCure-L (3 M Oral Care) using 2 different light exposure protocols: one 40 s exposure centered over the specimen; and two 20 s light exposures that delivered light from two positions to better cover the entire tooth. 16 groups with 10 specimens in each group were made. The Knoop hardness (KH, kg/mm2) was measured at the top and bottom of the specimen in the center and at the cervical, incisal, mesial, and distal peripheral regions. The active tip diameters (mm) and spectral radiant powers (mW/nm) of the LCUs were measured with and without the interposition of the RBC, as well as the radiant exposure beam profiles (J/cm²) delivered to the top of the RBCs. The data was analyzed using Three-way ANOVA and Tukey's tests (α = 0.05).

RESULTS

The VALO Grand (1029 mW) emitted twice the power of the Radii Xpert (500 mW). The KH values of VI and TN resin composite specimens were significantly affected by the LCU used (p < .001), the measurement location (p < .001), and the surface of the specimen (p < .001). LCUs with wider tip diameters produced greater Knoop hardness values at the peripheries of the 12 mm of long, 9 mm wide specimens. In general, the VALO Grand produced the highest KH values, followed by Elipar DeepCure-L, then by Radii Xpert. The Emitter Now Duo LCU produced the lowest values. Exposing the veneers from two locations reduced the differences between the LCUs and the effect of the measurement location. Only the VALO Grand could fully cover the composite veneer with light when the two locations were used.

SIGNIFICANCE

The light tip must cover the entire restoration to photocure the RBC beneath the light tip.

Instrumental and visual evaluation of the color adjustment potential of a recently introduced single‑shade composite resin versus multishade composite resins

STATEMENT OF PROBLEM

Single-shade composite resins simplify the process of shade selection by providing a narrow range of color but the ability to simulate all shades. However, evidence is limited for the color shifting ability of a newly developed single‑shade composite resin.

PURPOSE

The purpose of this in vitro study was to evaluate the instrumental color adjustment potential (CAP-I) and visual color adjustment potential (CAP-V) of a recently introduced single-shade composite resin compared with conventional multishade composite resins against different background colors.

MATERIAL AND METHODS

Four multishade composite resins (Spectrum TPH3, Beautifil II, Clearfil AP-X, and Gradia Direct) and a single-shade composite resin (Charisma Diamond One) were tested. Four base shades (A1, A2, A3, and A3.5) of the same composite resin (Filtek Z350XT) were selected as different background colors. Dual specimens (an outer base material with an inner hole filled with inner test material) and single specimens of all test and base materials were prepared (n=6 per group). Spectral reflectance values were obtained by using a spectroradiometer. The color difference (ΔE00) and relative translucency parameter (RTP) were calculated by using the CIEDE2000 and RTPCIEDE2000 formula. Visual scoring of color matching was performed by independent observers. The CAP-I and CAP-V values were calculated according to ΔE00 and visual scoring. Analysis of variance (ANOVA) was used for statistical analysis (α=.05).

RESULTS

CAP-I and CAP-V were significantly affected by composite resin type, background color, and their interaction (P<.001). Positive CAP-I and CAP-V values were found for the majority of test materials. Charisma Diamond One exhibited the highest CAP-I value under all background colors, the highest CAP-V value under most background colors, and the significantly highest RTP value (P<.001).

CONCLUSIONS

The color adjustment potential was dependent on the material type and background color. Charisma Diamond One exhibited the highest color adjustment potential and the most pronounced color shifting ability.

Esthetic Rehabilitation of Pediatric Patients Using Direct Bonding Technique—A Case Series Report

Pediatric esthetic dentistry is a sensitive technique, as children can be less cooperative; hence, minimal appointments are preferred. The most conservative treatment modality for anterior esthetic rehabilitation is using direct composite veneer restorations. In many instances, esthetic improvements using composite resin are the only possible option until the growth phase of the pediatric patient is complete. In this article, we present three different case scenarios in young teenagers with different treatment needs requiring esthetic restorations. The first case report is a patient with amelogenesis imperfecta, the second is with generalized spacing, and the third is with localized microdontia. All three patients were followed up for six months post direct composite veneering and were highly satisfied with their treatment outcomes, which boosted their self-confidence.

Coverage error of three resin composite systems to vital unrestored maxillary anterior teeth

OBJECTIVE

Define the color of anterior teeth of a selected population and correlate it (by using coverage error [CE] and the frequency of best match) with the final color of all possible enamel-dentine combinations of three different resin composite systems.

MATERIALS AND METHODS

Color of 636 vital unrestored anterior teeth (central incisors, lateral incisors and canines; n = 212) and disk specimens (12 mm diameter, varying thickness) corresponding to enamel-dentin combinations of all available enamel (0.5 mm and 1.0 mm thickness) and dentin shades (3.0 mm thickness) of Essentia, Enamel Plus HRi and IPS Empress Direct composite systems was measured using a clinical dental spectrophotometer (Spectroshade Micro). CE and frequency of best match for all composite systems were calculated for the measured in-vivo teeth color space.

RESULTS

Natural in-vivo teeth exhibit higher lightness when compared to enamel-dentin composite combinations, independently of the enamel thickness used. The best (lowest) CE was found for IPS Empress, while the highest values were found for Enamel Plus Hri independently of tooth type and enamel thickness (p < 0.001). The use of 0.5 mm instead of 1.0 mm enamel thickness within enamel-dentin composite combinations resulted in a lower CE for in-vivo tooth color (p < 0.001).

CONCLUSIONS

The color space defined by all possible enamel-dentin combinations of the studied resin composite systems does not fully match the color range of anterior teeth. All composite systems examined lack combinations with lightness values as high as the population's. IPS Empress Direct composite system represented better the in-vivo teeth color.

CLINICAL SIGNIFICANCE

The use of 0.5 mm enamel shade thickness is suggested when building layered restorations, as it provided better color coverage than using 1.0 mm thickness.

Porcelain Veneers in Vital vs. Non-Vital Teeth: A Retrospective Clinical Evaluation

Nowadays, the ceramic veneer approach can be considered more predictable than direct composite veneer. To date, there is a lack of studies comparing the clinical performance of anterior veneers cemented on vital teeth (VT) and non-vital teeth (NVT). This longitudinal clinical study investigated the performance of ceramic veneers in VT or anterior NVT. A total of 55 patients were evaluated in the study. Two groups were defined based on the vitality status of the teeth (93 teeth-vital and 61 teeth-non-vital). The United States Public Health Service (USPHS) criteria were used to assess the clinical status. The data were evaluated statistically with the Mann-Whitney U test. All restorations were considered acceptable, and only one veneer in VT failed for the criteria of secondary caries. There were no statistically significant differences in any of the criteria evaluated (p ≤ 0.671). The ceramic veneers evaluated showed a satisfactory clinical performance both in VT and NVT.

Digital planning of composite customized veneers using Digital Smile Design: Evaluation of its accuracy and manufacturing

OBJECTIVES

This study aimed to evaluate the production of customized composite veneers starting from a two-dimensional (2D) digital preview using the Digital Smile System (DSS). MATERIAL AND METHODS: A photographic examination of 30 patients was performed by taking two digital pictures of the face and a digital preview through the DSS. Moreover, optical scans of the dental arches were obtained and the data were entered into a three-dimensional (3D) software to prepare a virtual preview. The standard tessellation language files were sent for production using CAD-CAM technology. The Friedman test, Bonferroni, and Dunn post hoc tests were used, comparing the linear measurements of the 2D and 3D plans and the final veneers (α = .05).

RESULTS

Significant differences emerged between the pictures and digital scans on the mesial-distal widths of the lateral incisors and canine. Linear measurements in the 2D plan were significantly different from those of the 3D plan, except for the height measures of incisors. No significant changes were found on comparing the parameters of the 2D and 3D plans with those of the final pieces.

CONCLUSIONS

The customized veneers were clinically adequate and similar to 2D and 3D plans, although significant differences emerged between the picture and digital scans as well as between the 2D and 3D plans.

How does antiseptic mouthwashes against SARS-COV-2 affect the bond strength of universal adhesive to enamel?

This study compares the effect of different mouthwashes that have been recommended during the Coronavirus disease 2019 (COVID-19) pandemic on shear bond strength (SBS) of universal adhesive to enamel in regards to self-etch (SE) and etch-and-rinse (ER) modes. Flat enamel surfaces were obtained from 100 sound human maxillary central incisors. They were randomly allocated to five groups according to the different mouthwashes (no mouthwash/control [Ctrl], 0.2% chlorhexidine 1.5% hydrogen peroxide [H2 O2 ], 0.2% povidone-iodine [PVP-I], Listerine [L]), and adhesive application modes (ER and SE) (n = 10). After the application of a universal adhesive (single bond universal), composite resin (Filtek Z250) was bonded by a cylinder-shaped mold (height: 2 mm, diameter: 2.4 mm). They were subjected to SBS test using a universal testing machine (AGS-X, Shimadzu Corp.) (crosshead speed: 1 mm/min). The resin-enamel interfaces were observed with a scanning electron microscope (SEM). The semiquantitative chemical microanalyses were performed with energy-dispersive spectroscopy (EDS). The data were statistically analyzed by two-way analysis of variance and Bonferroni test (p < .05). In SE mode, Group Ctrl revealed significantly higher SBS than all mouthwash groups (p < .05). In ER mode, Group Ctrl showed significantly higher SBS than H2 O2 and PVP-I groups (p < .05). ER mode caused significantly higher SBS than SE mode in all mouthwash groups (p < .05). The SEM observations highlighted that Group Ctrl had a regular and intact hybrid layer with resin tag formation while the H2 O2 and PVP-I groups exhibited a thin hybrid layer in both modes. EDS analysis indicated that in SE mode, all mouthwash groups presented increased O content compared to Group Ctrl. H2 O2 and PVP-I that were suggested for preprocedural use during the COVID-19 pandemic, reduced the enamel bond strength of the universal adhesive in ER mode.

Evaluation of the Sealing Ability of Direct versus Direct-Indirect Veneer Techniques: An In Vitro Study

BACKGROUNDS

Marginal discoloration, microleakage, wear, and marginal fractures are all prevalent problems with composite veneers, and this scenario leads the esthetic outcome to deteriorate with time, resulting in patient discontent. Aim of the Study. The study's goal was to determine the marginal sealing ability of composite laminate veneers when employing two types of veneer techniques: direct and direct-indirect veneers, as well as two types of composite resin: nanohybrid and microfilled composite resin restorations, using dye penetration method.

MATERIALS AND METHODS

In this study, forty extracted human teeth were utilized. Following a standardized veneer preparation on the labial surface of the teeth, they were separated into two groups of 20 teeth each, using the following composite application techniques: group A: direct veneers and group B: direct-indirect veneers. Following that, each major group was separated into two subgroups of ten teeth each, based on the type of composite employed: subgroup 1 used nanohybrid composite resin, while subgroup 2 used microfilled composite resin. All of the samples were kept in distilled water, thermocycled, and soaked in 2% basic fuchsine dye. These specimens were sectioned and examined under a stereomicroscope for dye penetration at the gingival margin. The data was analyzed using independent T-tests using SPSS 22.

RESULT

Using direct-indirect veneer technique with nanohybrid composite resin material resulted in the most negligible dye penetration at the gingival margin, while using direct veneer technique with microfilled composite resin material resulted in the maximum dye penetration. For both composite materials, gingival microleakage was lower when using the direct-indirect veneer technique than when using the direct technique, and the difference was statistically significant (P < 0.05). In both techniques, gingival microleakage was lower with nanohybrid composite than with microfilled composite, and the difference was statistically highly significant (P = 0.001).

CONCLUSION

The sealing ability of the gingival margin of tooth/composite interface is better when applying direct-indirect veneer technique with nanohybrid composite resin than that of direct veneer technique with microfilled composite resin material.