Impact of excessive occlusal load on successfully-osseointegrated dental implants: a literature review

Three-dimensional finite element analysis of stress distribution on different complex macro designs in commercially available implants: An in-vitro study

Objective

This study aimed to investigate the effects of different commercially available complex implant macro designs on stress distributions using Finite element analysis. The experiment is done under varying simulated bone conditions to provide reference for clinical application.

Materials and methods

The study employed the Finite Element Analysis (FEA) method to compare four commercially available complex implant macro designs on a Computer-Aided Design (CAD) model of a maxillary bone segment. The three-dimensional geometrical model of the implants was reconstructed from computed tomography (CT)-slices in Digital Imaging and Communications in Medicine (DICOM) format and contact condition between the implant and the bone was considered as 'Bonded', implying perfect osseointegration. All materials used in the models were assumed to be isotropic, homogeneous, and linearly elastic. The Finite element simulations employed load of 400 N under both axial and non-axial conditions Stresses were analysed under different bone conditions.

Results

Average values of von Mises stresses were used for comparing stress levels between implant designs. There was a definite increase in the equivalent stress values from higher density(D1)to lower density (D4) bone conditions for all implants. The percentage of increase ranged from 23.63 to 49.39 on axial loading and 20.39 to 57.19 when subjected to non-axial loading. The equivalent stress values resulted from non-axial loading were 1.78-2.94 times higher than that of axial loading for all implants under all bone densities. Among the complex designs Equinox Myriad Plus implant exhibited the least stress under axial loading (12.749-19.046 MPa) and (37.462-49.217 MPa) for non-axial loading. The stress on the crestal module was higher (1.49-2.99 times) than the overall stress on the implant regardless of the loading direction or bone conditions.

Conclusions

Data from the present study shows Equinox Myriad Plus implant generating the least equivalent stress and this can be taken as indicator in the biomechanical performance of the design.

A retrospective study on the influence of inclination of cusp on implant marginal bone height in patients with periodontal disease

PURPOSE

To investigate the correlation between the marginal bone height of implants in the posterior maxilla of patients with periodontal disease and the inclination of cusp, providing a theoretical basis for the occlusal design of implant restorations in such patients.  Methods: A total of 80 patients with periodontal disease who underwent implant restoration in the posterior maxilla (55 men and 25 women; mean age 56.66 ± 12.70 years) were selected, with a total of 80 implant restorations (one implant restoration per patient). In addition to recording the main research factor of the inclination of cusp, general patient information, implant characteristics and restoration characteristics were taken, and retrospective analysis of the case data and imaging data of the 80 patients from over 3 years was conducted. Cone beam computed tomography was performed preoperatively and 3 years after implant loading to measure and calculate the marginal bone height of the implants using the One Volume Viewer software. Correlation analysis was performed to determine the relationship between the inclination of the cusp and marginal bone height.  Results: There was a positive correlation between the inclination of cusp and the marginal bone height of the implants, with a correlation coefficient of 0.661 (p < 0.001); the diameter of the implants, implant type and restoration type were negatively correlated with the marginal bone height of the implants, with correlation coefficients of -0.364 (p = 0.001), -0.232 (p = 0.038) and -0.298 (p = 0.007), respectively.  Conclusion: When designing the occlusion of implant restorations in the posterior maxilla of patients with periodontal disease, it is advisable to appropriately reduce the restoration's inclination of cusp.

Long-term clinical performance of short 6-mm implants supporting single crowns in the posterior region: A 10-year cohort study

INTRODUCTION

Long-term clinical success of non-splinted, posterior, and short implants still is unclear. This prospective cohort study reports the 10-year follow-up of 6-mm implants supporting single crowns in the posterior region, and patient-reported outcomes.

METHODS

Baseline sample comprised 20 patients treated with 46 screw-retained crowns supported by 6-mm implants with moderately rough implant surface. Participants were recalled for a 10-year clinical follow-up to assess survival rates, biologic and mechanic conditions, quality of life (OHIP-14), and treatment satisfaction. Data were collected with clinical-radiographic exams and analyzed using descriptive and inferential statistics.

RESULTS

Fourteen patients with 35 implant-crown units were examined after 127.6 ± 11.8 months. For the entire cohort period, 7/46 implants were lost (survival estimate: 77.7% at 133 months), and mechanic complications occurred in 14/46 units (survival estimate: 66.4% at 116 months). In the Cox models, "maximum occlusal force" had a significant effect for implant loss (p = 0.038) and for prosthetic screw loosening (p = 0.038); "arch" and "bruxism" were not significant. Peri-implant bone loss was 0.4 ± 0.6 mm at 10 years. For peri-implant bone level, "crown-to-implant ratio" (p < 0.001) and "time" (p = 0.001) were significant. Bone levels differed from baseline to 12, 48, and 120 months. Satisfaction VAS was 94.0 ± 7.9 mm and OHIP-14 was 2.3 ± 2.2.

CONCLUSION

Single screw-retained crowns supported by 6-mm implants have an acceptable long-term clinical performance, with stable peri-implant bone levels after 10 years of function.

Effect of different implant locations and abutment types on stress and strain distribution under non-axial loading: A 3-dimensional finite element analysis

Background/purpose

Dental implants have been a popular treatment for replacing missing teeth. The purpose of this study was to investigate the impact of engaging (hexagonal) and non-engaging (non-hexagonal) abutments in various six-unit fixed prosthesis on the stress distribution and loading located in the implant neck, implant abutment, and surrounding bone.

Materials and methods

Three implants were digitally designed and inserted parallel to each other in edentulous sites of the maxillary right canine, maxillary right central incisor, and maxillary left canine. Titanium base engaging abutments, non-engaging abutments and connecting screws were designed. Five distinct models of 6-unit fixed dental prosthesis were created, each featuring different combinations of various abutments. Forces (45-degree angle) were applied to the prosthesis, allowing for the analysis of the stress distribution on the implant neck and abutments, and the maximum and minimum principal stress values on the cortical and trabecular bone.

Results

Von Mises stress values and stress distributions located in the implant neck region due to the applied loading forces were analyzed. The overall stress values were highest while employing the hexagonal abutments. The maxillary left canine with a hexagonal abutment (model 5) reported the highest von mises value (64.71 MPa) while the maxillary right canine with a non-hexagonal abutment (model 4) presented lowest von mises value (56.69 MPa).

Conclusion

The results suggest that both the various abutment combinations (engaging and non-engaging) on five different models have a similar influence on the distribution of stress within the implant system.

A retrospective study of the long-term survival of RESTORE® dental implants with resorbable blast media surface

PURPOSE

The aim of this study was to retrospectively evaluate the survival and failure rates of RESTORE® implants over a follow-up period of 10-15 years at a university dental hospital and to investigate the factors affecting the survival rate of these dental implants.

METHODS

A total of 247 RESTORE® dental implants with a resorbable blast media (RBM) surface inserted in 86 patients between March 2006 and April 2011 at the Department of Periodontology of Seoul National University Dental Hospital were included. Patients with follow-up periods of less than 10 years were excluded, and data analysis was conducted based on dental records and radiographs.

RESULTS

Over a 10- to 15-year period, the cumulative survival rate of the implants was 92.5%. Seventeen implants (6.88%) were explanted due to implant fracture (n=10, 4.05%), peri-implantitis (n=6, 2.43%), and screw fracture (n=1, 0.4%). The results of univariate regression analysis using a Cox proportional hazards model demonstrated that implants placed in male patients (hazard ratio [HR], 4.542; 95% confidence interval [CI], 1.305-15.807; P=0.017) and implants that supported removable prostheses (HR, 15.498; 95% CI, 3.105-77.357; P=0.001) showed statistically significant associations with implant failure.

CONCLUSIONS

Within the limitations of this retrospective study, the RESTORE® dental implant with an RBM surface has a favorable survival rate with stable clinical outcomes.

Dental Implant Treatment in Bruxers: A Case Report and Literature Review

This case report presents a literature review and a case report of a full-mouth implant rehabilitation for a 65-year-old woman with a history of Bruxism. The patient's oral condition showed dentition with severe occlusal wear, extensive dental work, and missing teeth replaced with bridges and implants. The existing dental work was failing due to recurrent caries and the mechanical failure of long-span bridges. The unique aspect of the treatment presented in this report is the management of existing osseointegrated implants of different systems with different platform designs, which adds to the treatment's complexity. The existing implants were incorporated into the planned treatment, and other implants were added to support maxillary zirconia and mandibular hybrid full-arch prostheses. After 2 years of function, extensive wear was evident on the milled acrylic, even though an occlusal guard was used. New acrylic teeth were processed using the same milled titanium bar of the mandibular hybrid prosthesis, and the occlusal surfaces of the acrylic teeth were protected with gold onlays. The patient is seen regularly for maintenance every 6 months with no further complications. Careful evaluation, planning, and treatment execution are paramount in managing patients with a history of bruxism. Patients should be prepared and informed about possible mechanical failure and seen regularly for maintenance.

Occlusion as a predisposing factor for peri-implant disease: A review article

BACKGROUND

The restoration of dental implants presents a unique challenge due to the intrinsic biomechanical differences between osseointegrated implants and natural teeth, and their subsequent responses to occlusal loading. However, controversy exists regarding the role that occlusion plays in the physiology of the peri-implant complex.

PURPOSE

To provide an overview of the scientific literature regarding occlusion as it relates to implant dentistry and peri-implant disease.

MATERIALS AND METHODS

This article presents a narrative review on occlusal loading and its potential effects on the peri-implant complex, as well as some generally accepted guidelines for occlusion in implant dentistry.

RESULTS AND CONCLUSIONS

Although there is strong evidence linking occlusal factors to mechanical complications of dental implants, the same cannot be said regarding biological complications. There is no clear scientific evidence on the relationship between occlusal overload and peri-implant disease. However, occlusal overload may be an accelerating factor for peri-implant disease in the presence of inflammation. As the biomechanical properties of dental implants differ from that of the natural dentition, modifications to classic concepts of occlusion may be necessary when dental implants are involved. Thus, clinical recommendations are proposed which function to minimize unfavorable occlusal forces on implant restorations and reduce the associated biological and mechanical complications.

Effects of crown-to-implant ratio on marginal bone level and bone density in non-splinted single implants: a cross-sectional study

BACKGROUND

Few studies have evaluated the effects of the crown-to-implant (C/I) ratio on the marginal bone level (MBL) and bone density in non-splinted single implants. The aim of this study was to assess the effect of C/I ratio on MBL and density of peri-implant bone in non-splinted posterior implants.

METHODS

The C/I ratio, MBL, and grayscale values (GSVs) for bone density were measured from X-rays. Four areas of interest (two at the apical area and two at the middle of the peri-implant area) and two control areas were selected for evaluation. Follow-up radiographs were calibrated according to the control areas.

RESULTS

In all, 117 non-splinted posterior implants in 73 patients followed up for a mean duration of 36.23 ± 10.40 (range 24-72) months were considered. The mean anatomical C/I ratio was 1.78 ± 0.43 (range 0.93 to 3.06). The mean change in MBL was 0.28 ± 0.97 mm. There were no significant associations between the C/I ratio and MBL changes (r = -0.028, p = 0.766). Pearson correlation showed a significant correlation between changes in GSV and the C/I ratio in the middle peri-implant area (r = 0.301, p = 0.001) and apical area (r = 0.247, p = 0.009).

CONCLUSIONS

A higher C/I ratio of single non-splinted posterior implants is associated with increased peri-implant bone density, but not correlated with changes in MBL.

The Effect of Proton Pump Inhibitors on Early Implant Failure A Retrospective Cohort Study

Background and Objectives: Maintenance of a firm and long-term stable osseointegration is the primary goal of implant dentistry. Time is used to define implant failure characteristics. Early implant failure (EIF) occurs up to one year after loading. Recent studies indicated an association between proton pump inhibitors (PPI) therapy and failure of osseointegration. The present study assessed whether the use of PPIs is a risk factor to EIF. Materials and methods: A retrospective cohort study including 687 patients and 2971 dental implants. The study group (PPIs users) comprised 17.3% (119) individuals and 18.7% (555) implants. The remaining cohort (82.7% (568) individuals and 81.3% (2416) implants) served as control. The information was taken from the patients' files. The following information was collected: age, gender, physical status, systemic diseases, HbA1C values before and after implant-supported prosthesis delivery in cases of diabetes mellitus, smoking, implant location, number of implants per individual, bone augmentation, implant brand, length and width, and EIF. EIF was defined as implant removal within a period of up to 12 months from loading. Results: EIF in PPIs vs. non-PPIs users was 19.3% vs. 14.3% (p = 0.16) at patient level and 5.4% vs. 3.5% at implant level (p = 0.03). Univariate analysis yielded factors significantly associated with PPIs use, including older age, physical status of the American Society of Anesthesiology (ASA) 3, hypertension, hyperlipidemia, diabetes mellitus, osteoporosis, cardiovascular accident (CVA), location (anterior mandible), shorter and narrower implants, and higher number of implants per individual. Multivariate analysis yielded statistically significant OR of 1.91; p = 0.01 for EIF following PPIs use and 2.3; p < 0.001 for location in anterior mandible. Conclusions: Patients and their healthcare providers are advised to carefully consider the potential risks of taking PPIs prior to dental implant surgery. Further research is needed to confirm these risks and elucidate systemic and local factors that may be involved in such outcomes.

Evaluation of two different occlusal patterns on single posterior implant-supported crowns: A 12-month prospective study of occlusal analysis

STATEMENT OF PROBLEM

According to the concept of implant-protected occlusion, light occlusion and late contact could prevent implants from occlusal overload. However, clinical data demonstrating how light occlusion differs from normal occlusion are lacking.

PURPOSE

The purpose of this prospective clinical study was to characterize the occlusal variation of single posterior implant-supported crowns with or without light occlusion.

MATERIAL AND METHODS

Participants with a single missing posterior maxillary or mandibular molar who were to receive implant-supported zirconia ceramic crowns were enrolled. The participants were divided into a light occlusion group, in which a 12-μm articulating film could be removed from the implant-supported crown and opposing natural teeth under the intercuspal position, and a normal occlusion group, in which the articulating film could not be removed. All participants underwent occlusal examinations using the T-scan III system, answered a satisfaction questionnaire using a visual analog scale (VAS), and received regular follow-ups. The participants were evaluated at 0.5, 3, 6, and 12 months after implant-supported crown delivery. The relative occlusal force of the implant-supported crowns, mesial teeth, control teeth (corresponding natural tooth on the dentition contralateral to each implant), and the occlusal contact time of implant-supported crowns were recorded. Moreover, the asymmetry index of the occlusal force and the VAS score were calculated. Two independent-sample tests were used to compare the 2 groups. The Wilcoxon rank sum and Mann‒Whitney tests were used to compare nonnormally distributed data (α=.001).

RESULTS

Fifty study participants with a mean ±standard deviation age of 36.97 ±7.34 years (23 men and 27 women aged 20 to 50 years) were followed for 0.5 to 12 months. No obvious complications of overloading were observed in either group. The mean ±standard deviation of the relative occlusal force of implant-supported crowns in the light occlusion group (from 4.91 ±3.52% to 10.34 ±4.35%) was always lower than that in the normal occlusion group (from 10.45 ±4.32% to 18.15 ±4.80%), while the mean ±standard deviation of the occlusal contact time in the light occlusion group (from 0.38 ±0.26 seconds to 0.10 ±0.07 seconds) was significantly later than that in the normal occlusion group (from 0.12 ±0.08 seconds to 0.04 ±0.02 seconds) (P<.001). The value of the asymmetry index of occlusal force remained within the normal range (10%). The VAS score in the normal occlusion group was significantly higher than that in the light occlusion group (P<.001).

CONCLUSIONS

Providing light occlusion to reduce occlusal force and delay the contact time was not stable over time. The relative occlusal force and occlusal contact time showed a similar development trend in both groups, and no obvious signs of occlusal overloading were observed in this study. Long-term follow-up is necessary for implant-supported prostheses because of the continuous increase in occlusal force.

Quantitative parameters of digital occlusal analysis in dental implant supported restorative reconstruction recent 5 years: a systematic review

OBJECTIVE

The aims of this systematic review were to evaluate the clinical masticatory performance of implant-supported restorations, observe the occlusal force changes in the distribution of the implant restoration and reveal the positive and negative contributing factors of implant design and components based on the outcomes of digital occlusal measurement.

MATERIAL AND METHODS

An extensive search was conducted through PubMed and CENTRAL to identify clinical trials on implant-retained restorations using digital occlusal analysis methods. Two researchers assessed the identified studies and data extraction independently, and the data synthesis strategies without meta-analysis that summarizes the effect estimates were adopted.

RESULTS

The search screened 3821 titles and abstracts, then full-text analysis for 26 articles was performed, and 14 studies were included in the quantitative synthesis. Four of six studies for implant-retained overdenture showed statistically significant improved bite force when immediate loading (p = .00045, .00005, .00055, and .00005, respectively), and no statistically significant results in the other two studies (p = .225, .371, respectively.) However, the results of the favoured intervention were not statistically significant (p = .104, .166, respectively) in two studies of single posterior implant restorations. In all three studies, the bite force distributed on the implant prostheses of partially fixed implant-retained restoration increased statistically significantly (p = .013, .001, .05, respectively).

CONCLUSIONS

The edentulous restoration supported by implants seems to significantly improves bite force and chewing efficiency compared with conventional dentures. Regular quantitative occlusal measurement is recommended to avoid the possible risk of overload. Smaller implants size and relatively small and flexible attachment designs may be more conducive to the stability and retention of the restoration of atrophy of alveolar bone.

Does Bruxism Affect Marginal Bone Level around Single Tooth Implants in the Posterior Mandible?

Background

Parafunctional forces are a potential risk factor for implant-related complications. This study aimed to evaluate the possible relationship of bruxism with implant-related complications and marginal bone loss (MBL).

Methods

In this prospective cohort study, patients were divided into two groups with and without bruxism, and received single-tooth implants in the posterior mandible. Patients in the bruxer group were requested to use a customized fabricated night guard. Bone quality was also assessed based on CBCT scans. The MBL, crown detachment, and porcelain fracture were evaluated, and clinical assessments were made at the 12-month follow-up.

Results

Seventy patients were studied in two groups (n = 35 in each group). None of the implants in any of the two groups showed pain, sensitivity, suppuration, exudation, clinically detectable mobility, or peri-implant radiolucency. No significant difference was observed between the two groups in the mean MBL at the 12-month follow-up (p =  0.60). Regarding bone quality, there was no significant difference in the mean MBL among different types of bone qualities (p = 0.66). There were no significant differences regarding crown detachment and porcelain fracture between the two groups either (p =  0.32 and p =  0.30, respectively).

Conclusion

According to the results of this study, dental implant treatment according to the suggested protocol in bruxers yielded promising outcomes.

In vivo measurement of three-dimensional load exerted on dental implants: a literature review

Background

For biomechanical consideration of dental implants, an understanding of the three-dimensional (3D) load exerted on the implant is essential, but little information is available on the in vivo load, including the measuring devices.

Purpose

This review aimed to evaluate studies that used specific load-measuring devices that could be mounted on an implant to measure the functional load in vivo.

Materials and methods

An electronic search utilizing the internet research databases PubMed, Google Scholar, and Scopus was performed. The articles were chosen by two authors based on the inclusion and exclusion criteria.

Results

In all, 132 studies were selected from the database search, and 16 were selected from a manual search. Twenty-three studies were finally included in this review after a complete full-text evaluation. Eleven studies were related to the force measurements using the strain gauges, and 12 were related to the piezoelectric force transducer. The principles of the two types of devices were completely different, but the devices produced comparable outcomes. The dynamics of the load magnitude and direction on the implant during function were clarified, although the number of participants in each study was small.

Conclusions

The load exerted on the implant during function was precisely measured in vivo using specific measuring devices, such as strain gauges or piezoelectric force transducers. The in vivo load data enable us to determine the actual biomechanical status in more detail, which might be useful for optimization of the implant prosthetic design and development of related materials. Due to the limited data and difficulty of in vivo measurements, the development of a new, simpler force measurement device and method might be necessary.

Roles of osteoclasts in alveolar bone remodeling

Osteoclasts are large multinucleated cells from hematopoietic origin and are responsible for bone resorption. A balance between osteoclastic bone resorption and osteoblastic bone formation is critical to maintain bone homeostasis. The alveolar bone, also called the alveolar process, is the part of the jawbone that holds the teeth and supports oral functions. It differs from other skeletal bones in several aspects: its embryonic cellular origin, the form of ossification, and the presence of teeth and periodontal tissues; hence, understanding the unique characteristic of the alveolar bone remodeling is important to maintain oral homeostasis. Excessive osteoclastic bone resorption is one of the prominent features of bone diseases in the jaw such as periodontitis. Therefore, inhibiting osteoclast formation and bone resorptive process has been the target of therapeutic intervention. Understanding the mechanisms of osteoclastic bone resorption is critical for the effective treatment of bone diseases in the jaw. In this review, we discuss basic principles of alveolar bone remodeling with a specific focus on the osteoclastic bone resorptive process and its unique functions in the alveolar bone. Lastly, we provide perspectives on osteoclast-targeted therapies and regenerative approaches associated with bone diseases in the jaw.

Peri-Implant Bone Loss and Overload: A Systematic Review Focusing on Occlusal Analysis through Digital and Analogic Methods

The present review aimed to assess the possible relationship between occlusal overload and peri-implant bone loss. In accordance with the PRISMA guidelines, the MEDLINE, Scopus, and Cochrane databases were searched from January 1985 up to and including December 2021. The search strategy applied was: (dental OR oral) AND implants AND (overload OR excessive load OR occlusal wear) AND (bone loss OR peri-implantitis OR failure). Clinical studies that reported quantitative analysis of occlusal loads through digital contacts and/or occlusal wear were included. The studies were screened for eligibility by two independent reviewers. The quality of the included studies was assessed using the Risk of Bias in Non-randomized Studies of Interventions (ROBINS-I) tool. In total, 492 studies were identified in the search during the initial screening. Of those, 84 were subjected to full-text evaluation, and 7 fulfilled the inclusion criteria (4 cohort studies, 2 cross-sectional, and 1 case-control). Only one study used a digital device to assess excessive occlusal forces. Four out of seven studies reported a positive correlation between the overload and the crestal bone loss. All of the included studies had moderate to serious overall risk of bias, according to the ROBINS-I tool. In conclusion, the reported data relating the occlusal analysis to the peri-implant bone level seem to reveal an association, which must be further investigated using new digital tools that can help to standardize the methodology.

Biomechanical Analysis of Different Framework Design, Framework Material and Bone Density in the Edentulous Mandible With Fixed Implant-Supported Prostheses: A Three-Dimensional Finite Element Study

PURPOSE

The objective of this finite element study was to investigate the effect of different framework designs, framework materials, and bone densities on the stress distribution of fixed implant-supported prostheses for edentulous mandibles.

MATERIALS AND METHODS

Under the condition of 2-mm cortical bone, 16 models were created in the edentulous mandible to simulate different framework designs (1-piece or 3-piece frameworks) with different framework material (pure titanium, zirconia, polyetheretherketone, or carbon fiber-reinforced polyetheretherketone) in-high or low-density trabecular bone. Then, vertical loading and oblique loading at 75° were applied to the anterior and posterior regions. The stress distribution and stress concentration region of implant and peri-implant bone with different combinations were compared by finite element analysis.

RESULTS

The use of the 1-piece zirconia framework in high-density trabecular bone improved stress distribution on implants and peri-implant bone. The region of stress concentration is located in the buccal cervix of the distal implants and the distobuccal portion of the cortical bone in all models. To improve the stress distribution on fixed implant-supported dentures for edentulous mandibles, the 1-piece framework and zirconia represent the better combinations.

CONCLUSION

Under the condition of 2-mm cortical bone thickness, the full-arch zirconia framework had minimum von Mises stress on implants and peri-implant bone in all models, and high trabecular bone density greatly decreased the stress on cortical bone. This article is protected by copyright. All rights reserved.

Occlusal change in posterior implant-supported single crowns and its association with peri-implant bone level: a 5-year prospective study

OBJECTIVES

This study aims to analyze the 5-year occlusal change in posterior implant-supported single crowns and the association between the relative occlusal force (ROF) and peri-implant bone level.

MATERIALS AND METHODS

Partially edentulous patients who had received implant-supported single crowns in the posterior region were included. Occlusal examinations with a computerized occlusion analysis system were conducted at 0.5, 3, 6, 12, 24, 36, 48, and 60 months after delivery of the implant-supported single crown. The ROFs of implant-supported single crowns, mesial adjacent teeth, and control natural teeth were recorded. Intraoral periapical radiographs were taken at each follow-up time to evaluate marginal bone level (MBL). Ordinary least square regression was used to analyze the association between ROF and MBL.

RESULTS

Thirty-seven posterior implant-supported single crowns in 33 participants (23.9 to 70.0 years) were followed up for 0.5 to 60 months [(42.4 ± 26.0) months]. The ROF of implant-supported single crowns increased from 2 weeks to 3 months (P < 0.01) and increased continuously between all two sequential time points from 6 to 36 months, with significant differences (P < 0.05). Then ROFs of implant-supported single crowns were significantly higher than those of control teeth at 48 and 60 months (P < 0.05). Regression analysis showed that ROF was significantly associated with MBL with a coefficient of 0.008 (P < 0.05).

CONCLUSION

The ROFs of posterior implant-supported single crown have significant change during 5 years' follow-up. The association between ROF and MBL has limited clinical significance.

TRIAL REGISTRATION

Chinese Clinical Trial Registry: ChiCTR-ROC-17012240.

CLINICAL RELEVANCE

The occlusion of implant-supported single crowns should be carefully monitored during follow-up examinations, and occlusal adjustment should be considered to prevent overloading.

Occlusal Indicators Used in Dental Practice: A Survey Study

Introduction

The function of the masticatory apparatus is complete when the dentition is intact with contact between the individual teeth and proper occlusion with the antagonists. For years, occlusal contacts have been studied to determine their exact location and describing various materials and methods for their registration such as paper foil, silk, and Shimstock foil. For years, occlusal contacts have been studied to determine their exact location and describe various materials and methods for their registration such as paper foil, silk, shim stock foil, the T-Scan system, and more recently the OccluSense system. The primary aim of the study was at evaluating which of the occlusal indicators is the most commonly used in practice, and the secondary aim was whether dentists are willing to use digital methods to examine occlusion.

Materials and Methods

The main primary information of the survey was collected by sending electronically anonymous questionnaires to 2014 dentists, randomly selected from all regions of the country. 228 questionnaires were filled in and returned. To achieve the goal of the study, the self-developed questionnaire was created and tested to survey the opinion about the use of occlusal indicators in dental practice. Each questionnaire contains questions about the sociodemographic and professional status of the people in the group and their opinion about the positives and negatives and the effectiveness of occlusal indicators.

Results

The obtained results confirm the statement that the most frequently used occlusal indicator in dental practice is the articulation paper. Articulation foil and silk are used less frequently than articulation paper. Of the listed quality indicators, Shimstock foil is rarely used in practice. Of the indicated quantitative indicators, the T-Scan system is more used than the OccluSense system. In the era of rapid technology development, the opinion and desire of dentists to increasingly want to introduce in their clinical practice quantitative methods are the digital diagnosis of occlusion.

Conclusion

In any dental practice, if technically possible, digital methods would be used, giving more accurate and reliable data on the registered occlusal contacts.

Effect of Opposite Tooth Condition on Marginal Bone Loss around Submerged Dental Implants: A Retrospective Study with a 3-Year Follow-Up

Background: The objective of this study was to evaluate the effects of opposite tooth conditions on change in marginal bone level (MBL) around submerged dental implants. Materials and methods: The study included healthy patients with one or two implants. Structures opposite implants were either natural teeth (NT) or fixed restorations (FRs). MBLs were measured on digital periapical radiographs at the mesial and distal aspects of each implant. Results: Sixty implants were inserted by the 3-year follow-up. Mean MBLs for NT were 0.21 ± 0.33 mm before prosthetic loading and 0.30 ± 0.41 mm 3 years later (p = 0.001). Mean MBLs with FRs were 0.36 ± 0.45 mm before loading and 0.53 ± 0.50 mm 3 years later (p < 0.001). Changes in mean MBL from the 6-month follow-up to the 1- and 3-year follow-ups were statistically significant (p < 0.01) for implants opposite NT. However, changes in mean MBL from the 6-month follow-up to the 1-year (p = 0.161) and 3-year follow-ups (p = 1.000) were not significant for implants opposite FRs. Between baseline and the 3-year follow-up, MBL change was relatively small and did not differ regarding NT and FRs. Conclusion: Bone loss was greater if submerged dental implants were opposed by FRs. MBLs around submerged implants continued to change after 3 years if NT opposed implants.

Structural characteristics of the bone surrounding dental implants placed into the tail-suspended mice

BACKGROUND

There are many unclear points regarding local structural characteristics of the bone surrounding the implant reflecting the mechanical environment.

PURPOSE

The purpose of this study is to quantitatively evaluate bone quality surrounding implants placed into the femurs of mice in an unloading model, and to determine the influence of the mechanical environment on bone quality.

METHODS

Twenty 12-week-old male C57BL6/NcL mice (n = 5/group) were used as experimental animals. The mice were divided into two groups: the experimental group (n = 10) which were reared by tail suspension, and the control group (n = 10) which were reared normally. An implant was placed into the femur of a tail-suspended mouse, and after the healing period, they were sacrificed and the femur was removed. After micro-CT imaging, Villanueva osteochrome bone stain was performed. It was embedded in unsaturated polyester resin. The polymerized block was sliced passing through the center of the implant body. Next, 100-μm-thick polished specimens were prepared with water-resistant abrasive paper. In addition to histological observation, morphometric evaluation of cancellous bone was performed, and the anisotropy of collagen fibers and biological apatite (BAp) crystals was analyzed.

RESULTS

As a result, the femoral cortical bone thickness and new peri-implant bone mass showed low values in the tail suspension group. The uniaxial preferential orientation of BAp c-axis in the femoral long axis direction in the non-implant groups, but biaxial preferential orientation of BAp c-axis along the long axis of implant and femoral long axis direction were confirmed in new bone reconstructed by implant placement. Collagen fiber running anisotropy and orientation of BAp c-axis in the bone surrounding the implant were not significantly different due to tail suspension.

CONCLUSIONS

From the above results, it was clarified that bone formation occurs surrounding the implant even under extremely low load conditions, and bone microstructure and bone quality adapted to the new mechanical environment are acquired.

Application of biomaterials in periodontal tissue repair and reconstruction in the presence of inflammation under periodontitis through the foreign body response: Recent progress and perspectives

Periodontitis would cause dental tissue damage locally. Biomaterials substantially affect the surrounding immune microenvironment through treatment-oriented local inflammatory remodeling in dental periodontitis. This remodeling process is conducive to wound healing and periodontal tissue regeneration. Recent progress in understanding the foreign body response (FBR) and immune regulation, including cell heterogeneity, and cell-cell and cell-material interactions, has provided new insights into the design criteria for biomaterials applied in treatment of periodontitis. This review discusses recent progress and perspectives in the immune regulation effects of biomaterials to augment or reconstruct soft and hard tissue in an inflammatory microenvironment of periodontitis.

Occlusal Schemes for Implant Restorations: Best Evidence Consensus Statement

PURPOSE

Numerous studies have focused on the various complications with implant-retained restorations and a common thread in these publications is the potential for occlusal overload. The purpose of this Best Evidence Consensus Statement on implant occlusal schemes was to review the literature to determine the level of scientific evidence upon which the articles are based.

MATERIALS AND METHODS

Limiting the search to Clinical trials, Randomized Controlled Trials, Systematic Reviews, Meta-analyses, the key words: dental implants, occlusion, found no citations. Expanding the search to Journal articles found 1,483 results, 20 of which pertained to the question. Doing a similar search including Journal Articles, the key words: dental implants and occlusal scheme found 47 citations, 17 of which were pertinent to the question.

RESULTS

After eliminating duplicates and non-relevant articles, 15 were included in the review. Nineteen additional articles were culled by going through the reference lists in the aforementioned articles.

CONCLUSIONS

There is a lack of scientific evidence regarding the occlusal scheme utilized with implant restorations that will minimize or eliminate complications. In light of this lack of scientific evidence, the style of occlusion a practitioner utilizes with tooth or mucosal supported prostheses may be used with implant-supported restorations until compelling evidence dictates otherwise.

Impact of peri-implant bone resorption, prosthetic materials, and crown to implant ratio on the stress distribution of short implants: a finite element analysis

The purpose of this study was to determine the effects of prosthetic materials and crown/implant (C/I) ratio on short implants with a marginal bone resorption. Three-dimensional finite element analysis was used to simulate stress distribution under static loading in non-resorption and resorption scenarios (3-mm vertical bone loss) in implants restored with single crowns and C/I ratios of 1:1, 1.5:1, and 2:1 were evaluated. Different crown materials were used: porcelain-fused to metal, porcelain-fused to zirconia, monolithic zirconia, and zirconia-based crown veneered with indirect composite resin. The C/I ratio, the peri-implant bone resorption, and the loading conditions were the key factors affecting the generated stress in short implants. In non-resorption models, von Mises stress ranged between 50 and 105 MPa whereas in resorption models, the values ranged from 168 to 322 MPa, both increasing with the higher C/I ratio under oblique forces. Under axial loading, the C/I ratio did not influence the stress values as the presence of resorption was the only parameter increasing, 57 MPa for the non-resorption models and 101 MPa for the resorption models, respectively. Preference of a prosthetic material was ineffective on the distribution of stress in the bone and implant structure under static loading in any models. The peri-implant bone resorption and a higher C/I ratio in short implants increase the stress values under both axial and oblique forces, whereas the crown material does not influence stress distribution in the surrounding bone and implant structure.

Influence of occlusal loading on peri-implant inflammatory cytokines in crevicular fluid: a prospective longitudinal study

Objective

The objective of the study was to evaluate the relation between occlusal loading and peri-implant crevicular fluid cytokine expression in patients with implant-supported complete fixed prostheses in both arches.

Material and methods

A prospective longitudinal clinical study was performed at a university clinic. Fifteen patients were selected and 11 were included. All patients had bimaxillary implant-supported complete fixed ceramo-metallic prostheses loaded at least 12 months before the beginning of the study. Allocation was established for each patient using a computerized occlusal analysis system. The test implant was the maxillary implant closest to the point of highest occlusal loading. The maxillary implant with least loading was the control implant. Occlusal adjustment was performed using a round diamond burr. This occlusal distribution was verified with the occlusal analysis system. Expression of cytokines from peri-implant crevicular fluid (TNF-α, IL-10, IL-6, IL-1β, IL-8) were recorded and analyzed in both test and control implants before (baseline: T0) and 2 (T1) and 12 months (T2) after occlusal adjustment. The Brunner-Langer non-parametric test was performed.

Results

At T0, the expression of IL-10 was significantly higher in the test group implants (p = 0.018). Between T0 and T1, the expression of all the cytokines decreased in the implants of both groups with statistically significant differences, except for TNF (p = 0.271). When comparing both groups at T1, there was no statistically significant difference in any of the analyzed cytokines. At T2, TNF-α suffered when compared with baseline, a statistical decrease in both study and control implants (p < 0,001). At T2, there were no statistically significant differences between groups in any of the cytokines analyzed.

Conclusions

Implants with higher occlusal load presented higher expression of IL-10 in peri-implant crevicular fluid. Occlusal adjustment produced a decrease in the expression of all the analyzed cytokines, both in test and control implants.

Breaking the wave of peri-implantitis

Peri-implant diseases are prevalent with a weighted mean prevalence rate of 43% across Europe and 22% across South and North America. Although the main etiologic agent is bacterial biofilm, a myriad of factors influence the initiation and progression of the disease. Unfortunately, the treatment of peri-implant diseases is at best favorable in the short term with a high rate of persistent inflammation and recurrence. Therefore, it is sensible to consider and control all potential factors that may predispose an implant to peri-implant tissue inflammation in an attempt to avoid the disease. This paper reviews recent evidence on factors that may predispose implants to peri-implantitis and measures that can be taken to prevent it.

Long-term outcomes of osteotome sinus floor elevation without grafting in severely atrophic maxilla: A 10-year prospective study

OBJECTIVE

The aim of the present study was to report 10-year results of osteotome sinus floor elevation (OSFE) without grafting severely atrophic maxilla (residual bone height ≤4 mm).

MATERIALS AND METHODS

Patients undergoing OSFE without grafting and implant placement were included for 10-year examinations. Implant survival, complication-free survival, modified bleeding index (mBI), modified plaque index (mPI), pocket probing depth (PPD), peri-implant marginal bone loss (MBL), endo-sinus bone gain (ESBG) and mean cost of recurrence were evaluated.

RESULTS

Overall, 23 patients with 35 implants attended 10-year examination. Cemented implant crowns or implant-supported fixed dental prostheses were delivered to the patients. Kaplan-Meier implant survival was 89.2% at implant level and 84.1% at patient level. Complication-free survival was 26.0% at patient level and 37.0% at implant level. The average complication-free survival time was 74.6 months (95% CI: 63.2-86.0 months) at implant level and 69.1 months (95% CI: 54.8-83.4 months) at patient level. The mBI, mPI, PPD, MBL and ESBG at 10-year follow-up were 0.91 ± 0.58, 0.48 ± 0.51, 2.94 ± 0.79 mm, 1.63 ± 0.83 mm and 2.72 ± 0.51 mm, respectively. The cost of managing recurrence was 43.6% of the initial cost of treatment.

CONCLUSION

The results of the present study indicate that OSFE without grafting is a reliable treatment option in severely atrophic maxilla. Acceptable survival rate, stable MBL and ESBG could be achieved within 10 years. Low complication-free survival and high costs of recurrence management need to be considered.

Comparison between experimental digital image processing and numerical methods for stress analysis in dental implants with different restorative materials

The aim of this study is to evaluate the stresses transferred to peri-implant areas from single implants restored with different restorative materials and subjected to a static vertical load with low eccentricity. A total of 12 crowns were made with four types of materials: carbon fiber-composite, metal-ceramic, metal-composite, and full-metal, all of them cemented over a titanium abutment. Three different ways of approaching the problem have been used independently to verify the robustness of the conclusions. The experimental results of stress distribution around the implant were obtained by two image processing techniques: Digital Photoelasticity and Digital Image Correlation (DIC). The tests have been modelled by 3D Finite Element Method (FEM). The FEM models have also been used to study the sensitivity of the results to slight changes in geometry or loads, so that the robustness of the experimental techniques can be analyzed. In addition, the realistic bone morphology of the mandible has also been modelled by FEM, including the cortical and trabecular bone property distinctions.

Peri-implantitis Update: Risk Indicators, Diagnosis, and Treatment

Despite the success rates of dental implants, peri-implantitis presents as the most common complication in implant dentistry. This review discusses various factors associated with peri-implantitis and various available treatments, highlighting their advantages and disadvantages. Relevant articles on peri-implantitis published in English were reviewed from August 2010 to April 2020 in MEDLINE/PubMed, Scopus, and ScienceDirect. The identified risk indicators of peri-implant diseases are plaque, smoking, history of periodontitis, surface roughness, residual cement, emergence angle >30 degrees, radiation therapy, keratinized tissue width, and function time of the implant, sex, and diabetes. Peri-implantitis treatments can be divided into nonsurgical (mechanical, antiseptic, and antibiotics), surface decontamination (chemical and laser), and surgical (air powder abrasive, resective, and regenerative). However, mechanical debridement alone may fail to eliminate the causative bacteria, and this treatment should be combined with other treatments (antiseptics and surgical treatment). Surface decontamination using chemical agents may be used as an adjuvant treatment; however, the definitive clinical benefit is yet not proven. Laser treatment may result in a short-term decrease in periodontal pocket depth, while air powder abrasive is effective in cleaning a previously contaminated implant surface. Surgical elimination of a pocket, bone recontouring and plaque control are also effective for treating peri-implantitis. The current evidence indicates that regenerative approaches to treat peri-implant defects are unpredictable.

The etiology of hard- and soft-tissue deficiencies at dental implants: A narrative review

OBJECTIVE

The objective of the present paper was to review factors and conditions that are associated with hard and soft-tissue deficiencies at implant sites.

IMPORTANCE

Hard- and soft-tissue deficiencies at dental implants are common clinical findings. They can lead to complications and compromise implant survival and, hence, may require therapeutic interventions. It is, therefore, important to understand the etiology of hard and soft-tissue deficiencies. Based on this understanding, strategies should be developed to correct hard and soft-tissue deficiencies with the aim of improving clinical outcomes of implant therapy.

FINDINGS

A large number of etiological factors have been identified that may lead to hard and soft-tissue deficiencies. These factors include: 1) systemic diseases and conditions of the patients; 2) systemic medications; 3) processes of tissue healing; 4) tissue turnover and tissue response to clinical interventions; 5) trauma to orofacial structures; 6) local diseases affecting the teeth, the periodontium, the bone and the mucosa; 7) biomechanical factors; 8) tissue morphology and tissue phenotype; and 9) iatrogenic factors. These factors may appear as an isolated cause of hard and soft-tissue defects or may appear in conjunction with other factors.

CONCLUSIONS

Hard- and soft-tissue deficiencies at implant sites may result from a multitude of factors. They encompass natural resorption processes following tooth extraction, trauma, infectious diseases such as periodontitis, peri-implantitis, endodontic infections, growth and development, expansion of the sinus floor, anatomical preconditions, mechanical overload, thin soft tissues, lack of keratinized mucosa, malpositioning of implants, migration of teeth, lifelong growth, and systemic diseases. When more than one factor leading to hard and/or soft-tissue deficiencies appear together, the severity of the resulting condition may increase. Efforts should be made to better identify the relative importance of these etiological factors, and to develop strategies to counteract their negative effects on our patient's wellbeing.

The etiology of hard- and soft-tissue deficiencies at dental implants: A narrative review

OBJECTIVE

The objective of the present paper was to review factors and conditions that are associated with hard and soft-tissue deficiencies at implant sites.

IMPORTANCE

Hard- and soft-tissue deficiencies at dental implants are common clinical findings. They can lead to complications and compromise implant survival and, hence, may require therapeutic interventions. It is, therefore, important to understand the etiology of hard and soft-tissue deficiencies. Based on this understanding, strategies should be developed to correct hard and soft-tissue deficiencies with the aim of improving clinical outcomes of implant therapy.

FINDINGS

A large number of etiological factors have been identified that may lead to hard and soft-tissue deficiencies. These factors include: 1) systemic diseases and conditions of the patients; 2) systemic medications; 3) processes of tissue healing; 4) tissue turnover and tissue response to clinical interventions; 5) trauma to orofacial structures; 6) local diseases affecting the teeth, the periodontium, the bone and the mucosa; 7) biomechanical factors; 8) tissue morphology and tissue phenotype; and 9) iatrogenic factors. These factors may appear as an isolated cause of hard and soft-tissue defects or may appear in conjunction with other factors.

CONCLUSIONS

Hard- and soft-tissue deficiencies at implant sites may result from a multitude of factors. They encompass natural resorption processes following tooth extraction, trauma, infectious diseases such as periodontitis, peri-implantitis, endodontic infections, growth and development, expansion of the sinus floor, anatomical preconditions, mechanical overload, thin soft tissues, lack of keratinized mucosa, malpositioning of implants, migration of teeth, lifelong growth, and systemic diseases. When more than one factor leading to hard and/or soft-tissue deficiencies appear together, the severity of the resulting condition may increase. Efforts should be made to better identify the relative importance of these etiological factors, and to develop strategies to counteract their negative effects on our patient's wellbeing.

Human non-decalcified histology of three dental implants 45 months under function-a case report

BACKGROUND

Fracture of an implant is a quite rare event but represents an important opportunity to evaluate the peri-implant bone tissue response to implant overload in human beings. This study aimed to evaluate bone tissue around three fractured titanium implants retrieved from a human maxilla, by histomorphometric and birefringence analyses.

CASE REPORT

For this, the implants and the surrounding bone were removed after having been united to a tooth in function for 45 months, by a 4-mm internal diameter trephine bur, following an undecalcified section was obtained. The results showed a rate of 77.3% of bone-to-implant contact (BIC) and 80.3% of bone area filling within the limits of the implant threads. Under circularly polarized light microscopy investigation, the amount of the transverse collagen fibers was of 48.11%, and the amount of the longitudinal collagen fibers was of 51.89%.

CONCLUSION

Within the limitation of this study, the possible cause of the implant fracture could be the association of overload, inadequate implant diameter, and fragile internal hexagon connection.

Occlusal overload with dental implants: a review

Controversy persists as to the role of occlusal overload in peri-implantitis. Animal studies have not revealed the biological threshold for fatigue failure in the peri-implant bone. On the other hand, clinical studies have demonstrated a link between parafunction and implant failure, although variables such as intensity and frequency of loads, as well as bone density, have led to different outcomes. The absence of specific engineering “building codes” for the clinician has relegated prosthetic design planning to intuitive guidelines for all patients. For example, higher crown to implant ratios (2–3:1), implant cantilever prostheses and non-splinted restorative designs have been avoided because of the concern for overload. However, evidence has not supported this general approach. A call for preclinical research to establish specific patient load thresholds is in order to establish a customized treatment plan.

Inflammatory Periimplant Diseases and the Periodontal Connection Question

Implant therapy has become a widespread reality in modern dentistry. Nevertheless, dental implants can fail due to different causes, among which inflammatory peri-implant diseases (IPDs) are a major challenge, with prevalences that are much higher than previously believed.Specific searches were undertaken for each question raised between October and November 2017, in the PubMed website database (US National Library of Medicine, National Institutes of Health; Bethesda, Maryland, United States). Only articles written in English and published from 2007 onward were considered initially. The following keywords were used in the searches "periimplantitis (PI)," "periimplant mucositis (PM)," "dental implant failure," "periimplant microbiota," "periodontal microbiota," "implant failure" (no temporal limit), and "foreign body reaction" (no temporal limit). The selection process resulted in the selection of 239 articles that were analyzed in detail in elaborating this review. The reference list was limited to the 47 most relevant articles due to editorial limits of this Journal.Intrinsic differences between natural teeth and dental implants are able to give rise to inflammatory diseases that share only minor and scarcely relevant characters, and would consequently deserve different and specifically designed instruments and strategies, for both diagnosis and therapy.

Implant-to-bone force transmission: a pilot study for in vivo strain gauge measurement technique

The experimental determination of local bone deformations due to implant loading would allow for a better understanding of the biomechanical behavior of the bone-implant-prosthesis system as well as the influence of uneven force distribution on the onset of implant complications. The present study aimed at describing an innovative in vivo strain gauge measurement technique to evaluate implant-to-bone force transmission, assessing whether and how oral implants can transfer occlusal forces through maxillary bones. In vivo force measurements were performed in the maxillary premolar region of a male patient who had previously received a successful osseointegrated titanium implant. Three linear mini-strain gauges were bonded onto three different buccal cortical bone locations (i.e. coronal, middle, apical) and connected to strain measuring hardware and software. A customized screw-retained abutment was manufactured to allow for vertical and horizontal loading tests. As to the vertical load test, the patient was instructed to bite on a load cell applying his maximum occlusal force for 20 s and then recovering for 10 s to restore the bone unstrained state; the test was repeated 20 times consecutively. As regards the horizontal load test, the implant was subjected to a total of 20 load applications with force intensities of 5 and 10 kg. During the tests, the recorded signals were plotted in real time on a graph as a function of time by means of a strain analysis software. The described strain gauge measurement technique proved to be effective in recording the forces transmitted from osseointegrated implants to the cortical bone. Horizontal loads caused higher deformations of cortical bone than vertical biting forces; in both situations, the deformation induced by the force transferred from the implant to the bone progressively decreased from the coronal to the apical third of the alveolar ridge. At approximately 9 mm from the implant neck, the effect of occlusal force transmission through osseointegrated titanium implants was negligible if compared to the apical region.

A comparative study on the stress distribution around dental implants in three arch form models for replacing six implants using finite element analysis

Background

Dental implant is a method to replacement of missing teeth. It is important for replacing the missed anterior teeth. In vitro method is a safe method for evaluation of stress distribution. Finite element analysis as an in vitro method evaluated stress distribution around replacement of six maxillary anterior teeth implants in three models of maxillary arch.

Materials and Methods

In this in vitro study, using ABAQUS software (Simulia Corporation, Vélizy-Villacoublay, France), implant simulation was performed for reconstruction of six maxillary anterior teeth in three models. Two implants were placed on both sides of the canine tooth region (A model); two implants on both sides of the canine tooth region and another on one side of the central incisor region (B model); and two implants on both sides of the canine tooth region and two implants in the central incisor area (C model). All implants evaluated in three arch forms (tapered, ovoid, and square). Data were analyzed by finite analysis software.

Results

Von Mises stress by increasing of implant number was reduced. In a comparison of A model in each maxillary arch, the stress created in the cortical and cancellous bones in the square arch was less than ovoid and tapered arches. The stress created in implants and cortical and cancellous bones in C model was less than A and B models.

Conclusions

The C model (four-implant) reduced the stress distribution in cortical and cancellous bones, but this pattern must be evaluated according to arch form and cost benefit of patients.

Post-insertion Posterior Single-implant Occlusion Changes at Different Intervals: A T-Scan Computerized Occlusal Analysis

AIM

The aim of this prospective cohort study was to evaluate the postinsertion posterior single-implant occlusion changes at 3- and 6-month intervals using T-Scan computerized occlusal analysis.

MATERIALS AND METHODS

A total of 21 patients received single implant, opposed by natural dentition, in posterior regions of the maxilla or mandible (13 premolar, 8 molar) and were finally restored with cemented-retained metal-ceramic crowns. The occlusal contacts were equilibrated according to the implant-protective occlusion concept to develop light contact with heavy occlusion and no contact with light occlusion in maximum inter-cuspation. The percentage of force applied to the implant crowns (POFI) and contralateral teeth (POFT) was evaluated using T-Scan computerized occlusal analysis at prosthesis insertion, 3- and 6-month follow-up appointments. The data were statistically analyzed using Friedman test and Wilcoxon post hoc test (α = 0.05).

RESULTS

The POFI values at the 6- and 3-month follow-up appointments were significantly higher than those at prostheses insertion (p = 0.001 and p = 0.005 respectively). In addition, there were significant differences between the POFI at 3- and 6-month follow-up (p = 0.020). However, the POFT values at 3- and 6-month follow-up appointments were significantly lower than those at baseline (p < 0.001).

CONCLUSION

The intensity of occlusal contacts of implant-supported prostheses opposed by natural dentition gradually increased after prosthesis insertion. Placement of single posterior implant-supported restoration decreased the percentage of occlusal force applied to contralateral arch.

CLINICAL SIGNIFICANCE

A periodic occlusal adjustment of implant-supported prostheses is necessary to prevent potential overloading from the movement of opposing natural dentition.

Fabrication of a screw-retained hybrid prosthesis following treatment of peri-implant defects: a case report

The etiology of marginal bone loss around osseointegrated implants is primarily based on the biomechanical and/or microbial factors. If stresses and strains around dental implants under functional loading conditions are expected to exceed the physiologic tolerance thresholds of the alveolar bone, the fixed hybrid prosthesis might be a more reliable treatment of choice instead of fixed metal ceramic restorations. The purpose of this article is to report the 1-year follow-up of the periodontal and prosthetic rehabilitation of a patient who has presented with symptoms of peri-implantitis due to incorrectly planned implant supported fixed metal ceramic bridge which was later replaced with screw-retained hybrid prosthesis following the treatment of peri-implant defects. Treatment helped to maintain patient’s self-confidence and comfort, as well as favorable masticatory function. Rehabilitation with screw retained hybrid prosthesis is an ideal treatment of choice for maxillomandibular skeletal discrepancies.

The Role of Occlusion in Implant Therapy: A Comprehensive Updated Review

PURPOSE

Occlusal overload may cause implant biomechanical failures, marginal bone loss, or even complete loss of osseointegration. Thus, it is important for clinicians to understand the role of occlusion in implant long-term stability. This systematic review updates the understanding of occlusion on dental implants, the impact on the surrounding peri-implant tissues, and the effects of occlusal overload on implants. Additionally, recommendations of occlusal scheme for implant prostheses and designs were formulated.

MATERIALS AND METHODS

Two reviewers completed a literature search using the PubMed database and a manual search of relevant journals. Relevant articles from January 1950 to September 20, 2015 published in the English language were considered.

RESULTS

Recommendations for implant occlusion are lacking in the literature. Despite this, implant occlusion should be carefully addressed.

CONCLUSION

Recommendations for occlusal schemes for single implants or fixed partial denture supported by implants include a mutually protected occlusion with anterior guidance and evenly distributed contacts with wide freedom in centric relation. Suggestions to reduce occlusal overload include reducing cantilevers, increasing the number of implants, increasing contact points, monitoring for parafunctional habits, narrowing the occlusal table, decreasing cuspal inclines, and using progressive loading in patients with poor bone quality. Protecting the implant and surrounding peri-implant bone requires an understanding of how occlusion plays a role in influencing long-term implant stability.

Occlusal trauma and mucositis or peri-implantitis?

BACKGROUND AND OVERVIEW

The aim of this study was to describe the effects of bruxism in peri-implant bone loss 6 years after the placement of a successful implant-supported prosthesis, to describe its treatment, and to propose a differential diagnosis of the lesion.

CASE DESCRIPTION

A 62-year-old, nonsmoking, systemically healthy partially edentulous woman received 2 osseointegrated implants in the mandibular left region, which supported a 3-element fixed prosthesis. Six years later, the patient reported the development of bruxism. Clinical examination results indicated bleeding on probing, deepening of the peri-implant sulcus, and marginal soft-tissue overgrowth. Radiographic images suggested peri-implant bone loss. The authors diagnosed the lesion as trauma from occlusion and mucositis. Treatment involved anti-infective therapy and the use of a bite platform, resulting in bone recovery after 10 months. These results were maintained for 4 years.

CONCLUSIONS AND PRACTICAL IMPLICATIONS

Considering the existing contradictions in the literature, this case highlights the role of trauma from occlusion in the onset, progression, and treatment of lesions produced by occlusal overload around osseointegrated implants. In addition, it provides clinical background on the outcomes of anti-infective therapy associated with the use of a bite platform in the treatment of combined lesions of mucositis and trauma from occlusion in osseointegrated implants.

Analysis of the distribution of stress and deformation in single implant-supported prosthetic units in implants of different diameters

Abstract Introduction When stress and strain levels in the bone-implant system exceed It's capacity, a mechanical fatigue occurs, resulting in collapse and loss of osseointegration. Objective Analyze biomechanical behavior in single implant-supported prosthesis with implants of different diameters in the posterior mandible. Material and method Three different finite element models of Cone-Morse implants with the same height were created, varying the diameter (3.3 mm, 4.1 mm and 4.8 mm). The mandibular first molar area was the location of the implant, with It´s component and overlying prosthetic crown. The jawbone was composed of cortical and cancellous bone. Refined mesh of 0.5 mm was created in the critical interfaces to be analyzed. The loading of the models was performed at the point of occlusal contact with an occlusal load of 400 N. Result Maximum stress and strain occurred in the cervical regions of the implants in all groups, either in the implants or in components as well as in the analysis of cortical bone. The greater the diameter, the lower the stress and strain found in the implant. The 3.3 mm group had the highest strain in peri-implant cortical bone, and the 4.1 mm group had the smallest deformation, significantly lower than in the 4.8 mm group. Conclusion Although the biggest implant diameter (4.8 mm) appears to have lower values of stress and strain, the group of intermediate implant diameter (4.1 mm) showed less deformation rate in the cortical peri-implant bone. Therefore it is concluded that the 4.1 mm implant platform presented a more biomechanically effective peri-implant bone maintenance.

Effect of cantilever length and alloy framework on the stress distribution in peri-implant area of cantilevered implant-supported fixed partial dentures

Because many mechanical variables are present in the oral cavity, the proper load transfer between the prosthesis and the bone is important for treatment planning and for the longevity of the implant-supported fixed partial denture. Objectives To verify the stress generated on the peri-implant area of cantilevered implant-supported fixed partial dentures and the potential effects of such variable. Material and Methods A U-shaped polyurethane model simulating the mandibular bone containing two implants (Ø 3.75 mm) was used. Six groups were formed according to the alloy's framework (CoCr or PdAg) and the point of load application (5 mm, 10 mm and 15 mm of cantilever arm). A 300 N load was applied in pre-determined reference points. The tension generated on the mesial, lingual, distal and buccal sides of the peri-implant regions was assessed using strain gauges. Results Two-way ANOVA and Tukey statistical tests were applied showing significant differences (p<0.05) between the groups. Pearson correlation test (p<0.05) was applied showing positive correlations between the increase of the cantilever arm and the deformation of the peri-implant area. Conclusions This report demonstrated the CoCr alloy shows larger compression values compared to the PdAg alloy for the same distances of cantilever. The point of load application influences the deformation on the peri-implant area, increasing in accordance with the increase of the lever arm.

Success of 6-mm Implants with Single-Tooth Restorations: A 3-year Randomized Controlled Clinical Trial

The aim of the study was to test whether implants of 6 mm in length perform equally well as 10-mm implants in terms of survival and marginal bone-level changes when supporting single crowns. Patients with a posterior single-tooth gap were randomly allocated to either the placement of a 6-mm (test) or 10-mm implant (control). The treatment protocol allowed for internal sinus lift but not for lateral bone augmentation. After a healing period of 10 wk, implants were loaded with screw-retained single crowns. Survival rates, number of pockets ≥5 mm, and bleeding-on-probing were assessed clinically. The change of marginal bone level and crown-to-implant ratios were analyzed by 2 examiners. Longitudinal intragroup analyses for marginal bone levels were performed applying the Wilcoxon signed rank test. Intergroup differences at baseline and at 3 y were compared using the Mann-Whitney U test. The effect of implant length and crown-to-implant ratio on changes of marginal bone level also was determined. Of 94 implants placed (47 test and 47 control), 78 implants (40 test and 38 control) were available for follow-up examination at 3 y of loading. One test implant was lost during the second year. Hence, implant survival was not significantly different between the 2 groups after 3 y (98% test; 100% control). We found no significant change in the crestal bone level from baseline to 3 y for test and control implants with -0.19 ± 0.62 mm and -0.33 ± 0.71 mm, respectively. The intergroup difference was not significant. Crown-to-implant ratios were not associated with a statistically significant difference in marginal bone loss. However, the number of sites with pockets ≥5 mm was significantly higher in the test group. Based on the 3-y assessment, the use of 6-mm implants can be considered a viable option when reconstructing posterior single tooth gaps (German Clinical Trials Registry: DRKS00006290).

Bone Behavior in Relation to the Depth of the Line of Marginal Cementation of Prostheses on Morse Cone Implants: Radiographic Evaluation in a Dog Model

PURPOSE

This study was aimed at radiographically evaluating the effect of 3 different depths of the cementation line of prosthetic crowns on the bone response around Morse cone implants.

MATERIAL AND METHODS

Five dogs underwent extractions of the lower premolars; after 3 months, placement of 30 implants, 3 mm apical to the bone level, was performed. Prefabricated cylinders of alumina, used as abutments, with 3 different transmucosal extension were cemented to the implants with zinc oxide-eugenol cement, determining the depth of the cementation lines (1.5 mm apically, and 0.5 and 2.5 mm coronally, respectively, to the bone level). In the control group, implants and abutments were placed without crowns, therefore, with no cementation line.

RESULTS

The results showed no statistically significant differences between the control and test groups regarding the different depths of the cementation line both mesially (P = 0.18) and distally (P = 0.50).

CONCLUSION

Different depths of cementation did not affect the behavior of marginal bone, indicating that crowns can be cemented with zinc oxide-eugenol cement at any distance or even at the bone level without disturbing bone healing around Morse cone implants.

Do Mobility and Occlusal Trauma Impact Periodontal Longevity?

The impact of tooth mobility and occlusal trauma (OT) on periodontal bone loss and need for therapy has been debated for many years. This paper summarizes the relevant literature reported in three Dental Clinics of North America articles in the late 1990s, and adds newer information from the 2000s. Principle findings indicate that strong evidence of mobility and OT impacting tooth longevity is lacking, but reducing inflammation in the surrounding periodontium remains a critical treatment. Occlusal therapy when mobility is increasing, comfort or function are compromised, or periodontal regeneration procedures are planned should be considered.