Morphological and mechanical imaging of Bacillus cereus spore formation at the nanoscale

Learning from Nature: Bacterial Spores as a Target for Current Technologies in Medicine (Review)

The capability of some representatives of Clostridium spp. and Bacillus spp. genera to form spores in extreme external conditions long ago became a subject of medico-biological investigations. Bacterial spores represent dormant cellular forms of gram-positive bacteria possessing a high potential of stability and the capability to endure extreme conditions of their habitat. Owing to these properties, bacterial spores are recognized as the most stable systems on the planet, and spore-forming microorganisms became widely spread in various ecosystems.

Spore-forming bacteria have been attracted increased interest for years due to their epidemiological danger. Bacterial spores may be in the quiescent state for dozens or hundreds of years but after they appear in the favorable conditions of a human or animal organism, they turn into vegetative forms causing an infectious process. The greatest threat among the pathogenic spore-forming bacteria is posed by the causative agents of anthrax (B. anthracis), food toxicoinfection (B. cereus), pseudomembranous colitis (C. difficile), botulism (C. botulinum), gas gangrene (C. perfringens).

For the effective prevention of severe infectious diseases first of all it is necessary to study the molecular structure of bacterial spores and the biochemical mechanisms of sporulation and to develop innovative methods of detection and disinfection of dormant cells. There is another side of the problem: the necessity to investigate exo- and endospores from the standpoint of obtaining similar artificially synthesized models in order to use them in the latest medical technologies for the development of thermostable vaccines, delivery of biologically active substances to the tissues and intracellular structures. In recent years, bacterial spores have become an interesting object for the exploration from the point of view of a new paradigm of unicellular microbiology in order to study microbial heterogeneity by means of the modern analytical tools.

Atomic force microscopy as a biophysical tool for nanoscale forensic investigations

The atomic force microscope (AFM) has found its way to the arsenal of tools available to the forensic practitioner for the analysis of samples at the nano and microscales. As a non-destructive probing tool that requires minimal sample preparation, the AFM is very attractive, particularly in the case of minimal or precious sample. To date, the use of the AFM has primarily been in the arena of imaging where it has been complementary to other microscopic examination tools. Forensic applications in the visual examination of evidence such as blood stains, questioned documents, and hair samples have been reported. While a number of reviews have focused on the use of AFM as an imaging tool for forensic analyses, here we not only discuss these works, but also point to a versatile enhancement in the capabilities of this nanoscale tool - namely its use for force spectroscopy. In this mode, the AFM can determine elastic moduli, adhesion forces, energy dissipation, and the interaction forces between cognate ligands, that can be spatially mapped to provide a unique spatial visualization of properties. Our goals in this review are to provide a context for this capability of the AFM, explain its workings, cover some exemplary works pertaining to forensic sciences, and present a critical analysis on the advantages and disadvantages of this modality. Equipped with this high-resolution tool, imaging and biophysical analysis by the AFM can provide a unique complement to other tools available to the researcher for the analysis and characterization of forensic evidence.

Using Atomic Force Microscopy To Illuminate the Biophysical Properties of Microbes

Since its invention in 1986, atomic force microscopy (AFM) has grown from a system designed for imaging inorganic surfaces to a tool used to probe the biophysical properties of living cells and tissues. AFM is a scanning probe technique and uses a pyramidal tip attached to a flexible cantilever to scan across a surface, producing a highly detailed image. While many research articles include AFM images, fewer include force-distance curves, from which several biophysical properties can be determined. In a single force-distance curve, the cantilever is lowered and raised from the surface, while the forces between the tip and the surface are monitored. Modern AFM has a wide variety of applications, but this review will focus on exploring the mechanobiology of microbes, which we believe is of particular interest to those studying biomaterials. We briefly discuss experimental design as well as different ways of extracting meaningful values related to cell surface elasticity, cell stiffness, and cell adhesion from force-distance curves. We also highlight both classic and recent experiments using AFM to illuminate microbial biophysical properties.

Customizable 3D printed diffusion chambers for studies of bacterial pathogen phenotypes in complex environments

Gaps in our understanding of the natural ecology and survival mechanisms of pathogenic bacteria in complex microenvironments such as soil typically occur due to the difficulty in characterizing biochemical profiles and morphological characteristics as they exist in environmental samples. Conversely, accurate simulation of the abiotic and biotic chemistries of soil habitats within the laboratory is often a significant challenge. Herein, we present the fabrication of customizable and precisely engineered 3D printed diffusion chambers that can be used to incubate bacterial cultures directly in soil matrices within a controlled laboratory experiment, and study the dynamics between bacterial cells and soil components. As part of the design process, different types of 3D printing materials were evaluated for ease of sterilization, structural integrity throughout the experiment, as well as cost/ease of production. To demonstrate potential applications for environmental studies, the diffusion chamber was used to incubate cultures of Bacillus cereus T-strain and Escherichia coli strain O157 directly in soil matrices. We show that the chamber facilitates diffusion of abiotic/biotic components of the soil with target cells without contamination from in situ microbial communities, while allowing for single cell and ensemble level phenotypic analyses of bacteria cultured with and without soil matrices.

Recovery of Rare Earth Elements from Wastewater Towards a Circular Economy

The use of rare earth elements is a growing trend in diverse industrial activities, leading to the need for eco-friendly approaches to their efficient recovery and reuse. The aim of this work is the development of an environmentally friendly and competitive technology for the recovery of those elements from wastewater. Kinetic and equilibria batch assays were performed with zeolite, with and without bacterial biofilm, to entrap rare earth ions from aqueous solution. Continuous assays were also performed in column setups. Over 90% removal of lanthanum and cerium was achieved using zeolite as sorbent, with and without biofilm, decreasing to 70% and 80%, respectively, when suspended Bacillus cereus was used. Desorption from the zeolite reached over 60%, regardless of the tested conditions. When in continuous flow in columns, the removal yield was similar for all of the rare earth elements tested. Lanthanum and cerium were the elements most easily removed by all tested sorbents when tested in single- or multi-solute solutions, in batch and column assays. Rare earth removal from wastewater in open setups is possible, as well as their recovery by desorption processes, allowing a continuous mode of operation.

Assessing the Impact of Germination and Sporulation Conditions on the Adhesion of Bacillus Spores to Glass and Stainless Steel by Fluid Dynamic Gauging

The adhesion of spores of 3 Bacillus species with distinctive morphologies to stainless steel and borosilicate glass was studied using the fluid dynamic gauging technique. Marked differences were observed between different species of spores, and also between spores of the same species prepared under different sporulation conditions. Spores of the food-borne pathogen B. cereus were demonstrated to be capable of withstanding shear stresses greater than 1500 Pa when adhered to stainless steel, in contrast to spores of Bacillus subtilis and Bacillus megaterium, which detached in response to lower shear stress. An extended DLVO model was shown to be capable of predicting the relative differences in spore adhesion between spores of different species and different culture conditions, but did not predict absolute values of force of adhesion well. Applying the model to germinating spores showed a significant reduction in adhesion force shortly after triggering germination, indicating a potential strategy to achieve enhanced removal of spores from surfaces in response to shear stress, such as during cleaning-in-place procedures.

PRACTICAL APPLICATION

Spore-forming bacteria are a concern to the food industry because they have the potential to cause food-borne illness and product spoilage, while being strongly adhesive to processing surfaces and resistant to cleaning-in-place procedures. This work is of significance to the food processors and manufacturers because it offers insight to the properties of spore adhesion and identifies a potential strategy to facilitate the removal of spores during cleaning procedures.

Internal Hydration Properties of Single Bacterial Endospores Probed by Electrostatic Force Microscopy

We show that the internal hydration properties of single Bacillus cereus endospores in air under different relative humidity (RH) conditions can be determined through the measurement of its electric permittivity by means of quantitative electrostatic force microscopy (EFM). We show that an increase in the RH from 0% to 80% induces a large increase in the equivalent homogeneous relative electric permittivity of the bacterial endospores, from ∼4 up to ∼17, accompanied only by a small increase in the endospore height, of just a few nanometers. These results correlate the increase of the moisture content of the endospore with the corresponding increase of environmental RH. Three-dimensional finite element numerical calculations, which include the internal structure of the endospores, indicate that the moisture is mainly accumulated in the external layers of the endospore, hence preserving the core of the endospore at low hydration levels. This mechanism is different from what we observe for vegetative bacterial cells of the same species, in which the cell wall at high humid atmospheric conditions is not able to preserve the cytoplasmic region at low hydration levels. These results show the potential of quantitative EFM under environmental humidity control to study the hygroscopic properties of small-scale biological (and nonbiological) entities and to determine its internal hydration state. A better understanding of nanohygroscopic properties can be of relevance in the study of essential biological processes and in the design of bionanotechnological applications.

Nanoscale dielectric microscopy of non-planar samples by lift-mode electrostatic force microscopy

Lift-mode electrostatic force microscopy (EFM) is one of the most convenient imaging modes to study the local dielectric properties of non-planar samples. Here we present the quantitative analysis of this imaging mode. We introduce a method to quantify and subtract the topographic crosstalk from the lift-mode EFM images, and a 3D numerical approach that allows for extracting the local dielectric constant with nanoscale spatial resolution free from topographic artifacts. We demonstrate this procedure by measuring the dielectric properties of micropatterned SiO2 pillars and of single bacteria cells, thus illustrating the wide applicability of our approach from materials science to biology.

Effect of Actin Organization on the Stiffness of Living Breast Cancer Cells Revealed by Peak-Force Modulation Atomic Force Microscopy

We study the correlation between cytoskeleton organization and stiffness of three epithelial breast cancer cells lines with different degrees of malignancy: MCF-10A (healthy), MCF-7 (tumorigenic/noninvasive), and MDA-MB-231 (tumorigenic/invasive). Peak-force modulation atomic force microscopy is used for high-resolution topography and stiffness imaging of actin filaments within living cells. In healthy cells, local stiffness is maximum where filamentous actin is organized as well-aligned stress fibers, resulting in apparent Young's modulus values up to 1 order of magnitude larger than those in regions where these structures are not observed, but these organized actin fibers are barely observed in tumorigenic cells. We further investigate cytoskeleton conformation in the three cell lines by immunofluorescence confocal microscopy. The combination of both techniques determines that actin stress fibers are present at apical regions of healthy cells, while in tumorigenic cells they appear only at basal regions, where they cannot contribute to stiffness as probed by atomic force microscopy. These results substantiate that actin stress fibers provide a dominant contribution to stiffness in healthy cells, while the elasticity of tumorigenic cells appears not predominantly determined by these structures. We also discuss the effects of the high-frequency indentations inherent to peak-force atomic force microscopy for the identification of mechanical cancer biomarkers. Whereas conventional low loading rate indentations (1 Hz) result in slightly differentiated average stiffness for each cell line, in high-frequency measurements (250 Hz) healthy cells are clearly discernible from both tumorigenic cells with an enhanced stiffness ratio; however, the two cancerous cell lines produced indistinguishable results.