Hot melt extrusion as an approach to improve solubility, permeability and oral absorption of a psychoactive natural product, piperine

Preparation, Characterization and Evaluation of Nintedanib Amorphous Solid Dispersions with Enhanced Oral Bioavailability

The dissolution and bioavailability challenges posed by poorly water-soluble drugs continue to drive innovation in pharmaceutical formulation design. Nintedanib (NDNB) is a typical BCS class II drug that has been utilized to treat idiopathic pulmonary fibrosis (IPF). Due to the low solubility, its oral bioavailability is relatively low, limiting its therapeutical effectiveness. It is crucial to enhance the dissolution and the oral bioavailability of NDNB. In this study, we focused on the preparation of amorphous solid dispersions (ASD) using hot melt extrusion (HME). The formulation employed Kollidon® VA64 (VA64) as the polymer matrix, blended with the NDNB at a ratio of 9:1. HME was conducted at temperatures ranging from 80 °C to 220 °C. The successful preparation of ASD was confirmed through various tests including polarized light microscopy (PLM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). The in-vitro cumulative release of NDNB-ASD in 2 h in a pH 6.8 medium was 8.3-fold higher than that of NDNB (p < 0.0001). In a pH 7.4 medium, it was 10 times higher (p < 0.0001). In the in-vivo pharmacokinetic experiments, the area under curve (AUC) of NDNB-ASD was 5.3-fold higher than that of NDNB and 2.2 times higher than that of commercially available soft capsules (Ofev®) (p < 0.0001). There was no recrystallization after 6 months under accelarated storage test. Our study indicated that NDNB-ASD can enhance the absorption of NDNB, thus providing a promising method to improve NDNB bioavailability in oral dosages.

Formulation Development and Evaluation of Cannabidiol Hot-Melt Extruded Solid Self-Emulsifying Drug Delivery System for Oral Applications

Cannabidiol (CBD) is a highly lipophilic compound with poor oral bioavailability, due to poor aqueous solubility and extensive pre-systemic metabolism. The aim of this study was to explore the potential of employing Hot Melt Extrusion (HME) technology for the continuous production of Self Emulsifying Drug Delivery Systems (SEDDS) to improve the solubility and in vitro dissolution performance of CBD. Accordingly, different placebos were processed through HME in order to obtain a lead CBD loaded solid SEDDS. Two SEDDS were prepared with sesame oil, Poloxamer 188, Gelucire®59/14, PEO N80 and Soluplus®. Moreover, Vitamin E was added as an antioxidant. The SEDDS formulations demonstrated emulsification times of 9.19 and 9.30 min for F1 and F2 respectively. The formed emulsions showed smaller droplet size ranging from 150-400 nm that could improve lymphatic uptake of CBD and reduce first pass metabolism. Both formulations showed significantly faster in vitro dissolution rate (90% for F1 and 83% for F2) compared to 14% for the pure CBD within the first hour, giving an enhanced release profile. The formulations were tested for stability over a 60-day time period at 4°C, 25°C, and 40°C. Formulation F1 was stable over the 60-day time-period at 4°C. Therefore, the continuous HME technology could replace conventional methods for processing SEDDS and improve the oral delivery of CBD for better therapeutic outcomes.

Understanding the Interaction of Thermal, Rheological, and Mechanical Parameters Critical for the Processability of Polyvinyl Alcohol-Based Systems during Hot Melt Extrusion

Hot melt extrusion (HME) is a common manufacturing process used in the pharmaceutical industry to improve the solubility of poorly soluble active pharmaceutical ingredients (API). The goal is to create an amorphous solid dispersion (ASD) where the amorphous form of the API is stabilized within a polymer matrix. Traditionally, the development of pharmaceutically approved polymers has focused on requirements such as thermal properties, solubility, drug-polymer interactions, and biocompatibility. The mechanical properties of the material have often been neglected in the design of new polymers. However, new downstream methods require more flexible polymers or suitable plasticizer polymer combinations. In this study, two grades of the polymer polyvinyl alcohol (PVA), which is already established for HME, are investigated in terms of their mechanical, rheological, and thermal properties. The mechanical properties of the extruded filaments were tested by the three-point bending test. The rheological behavior was analyzed by oscillating plate measurements. Thermal analysis was performed by differential scanning calorimetry (DSC). In addition, the solid and liquid plasticizers mannitol, sorbitol, triacetin, triethyl citrate, polyethylene glycol, and glycerol were evaluated for use with PVA and their impact on the polymer properties was elaborated. Finally, the effects of the plasticizers are compared to each other, and the correlations are analyzed statistically using principal component analysis (PCA). Thereby, a clear ranking of the plasticizer effects was established, and a deeper understanding of the polymer-plasticizer interactions was created.

Accelerated Oral Healing by Angelica gigas Nakai from Hot Melt Extrusion Technology: An In Vitro Study

Background and Objectives: In spite of the oral environment being healing-prone, its dynamic changes may affect wound healing. The purpose of this study was to assess the oral wound healing effect of Angelica gigas Nakai (AG) prepared by hot-melt extrusion. Materials and Methods: Human gingival fibroblast (HGF) cells were treated with AG or AG via hot-melt extrusion (AGH) for 24 h to determine the optimal concentration. For evaluating the anti-inflammatory effect of AG and AGH, a nitric oxide assay was performed under lipopolysaccharide (LPS) stimulation. The wound-healing effects of AG and AGH were evaluated using cell proliferation/migration assays and wound-healing marker expression through qRT-PCR. Results: Both AG and AGH showed no cytotoxicity on HGH cells. Regarding nitric oxide production, AGH significantly decreased LPS-induced nitric oxide production (p < 0.05). AGH showed a significantly positive result in the cell proliferation/cell migration assay compared with that in AG and the control. Regarding wound healing marker expression, AGH showed significantly greater VEGF and COL1α1 expression levels than those in the others (p < 0.05), whereas α-SMA expression was significantly different among the groups. Conclusions: Within the limits of this study, AGH accelerated oral wound healing in vitro.

Development and Evaluation of Polymeric Mixed Micelles Prepared using Hot-Melt Extrusion for Extended Delivery of Poorly Water-Soluble Drugs

The poor aqueous solubility is a well-recognized restriction for the clinical application of many drug molecules. Micelles delivery system provides a promising strategy for the solubility enhancement of hydrophobic drugs. This study developed and evaluated different polymeric mixed micelles prepared using hot-melt extrusion coupled hydration method to improve the solubility and extend the release of the model drug ibuprofen (IBP). The physicochemical properties of the prepared formulations were characterized in terms of particle size, polydispersity index, zeta potential, surface morphology, crystallinity, encapsulation efficiency, drug content, in vitro drug release, dilution stability, and storage stability. Soluplus®/poloxamer 407, Soluplus®/poloxamer 188, and Soluplus®/TPGS mixed micelles had average particle sizes of 86.2 ± 2.8, 89.6 ± 4.2, and 102.5 ± 3.13 nm, respectively with adequate encapsulation efficiencies of 80% to 92%. Differential scanning calorimetry studies confirmed that the IBP molecules were dissolved in the polymers in an amorphous state. The in vitro release results revealed that the IBP-loaded mixed micelles presented extended-release behavior compared to the free drug. In addition, the developed polymeric mixed micelles remained stable upon dilution and one-month storage. These results demonstrated that the hot-melt extrusion coupling hydration method could be a promising, effective, and environment-friendly manufacturing technique for the scale-up production of polymeric mixed micelles to deliver insoluble drugs.

Hot Melt Extrusion as an Effective Process in the Development of Mucoadhesive Tablets Containing Scutellariae baicalensis radix Extract and Chitosan Dedicated to the Treatment of Oral Infections

Hot Melt Extrusion (HME) technology was developed to obtain blends containing lyophilized Scutellariae baicalensis root extract and chitosan in order to improve the rheological properties of the obtained blends, including tableting and compressibility properties. (Hydroxypropyl)methyl cellulose (HPMC) in 3 different ratios was used as amorphous matrix formers. The systems were characterized using X-ray powder diffraction (PXRD), Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance (FTIR-ATR), and in vitro release, permeability, and microbiological activity studies. Then, the extrudates were used to prepare tablets in order to give them the appropriate pharmaceutical form. HPMC-based systems released baicalin more slowly, resulting in delayed peaks in the acceptor fluid. This behavior can be explained by the fact that HPMC swells significantly, and the dissolved substance must have diffused through the polymer network before being released. The best tabletability properties are provided by the formulation containing the extrudate with lyophilized extract HPMC 50:50 w/w. These tablets offer a valuable baicalin release profile while maintaining good mucoadhesive properties that condition the tablet’s retention in the application site and the effectiveness of therapy.

Development and Characterization of Different Dosage Forms of Nifedipine/Indomethacin Fixed-Dose Combinations

Studies have shown that 40 individuals out of 100,000 are diagnosed with rheumatoid arthritis (RA) yearly, with a total of 1.3 million in the United States. Furthermore, the impact of RA in some cases can extend to cardiovascular diseases (CVD), as the studies showed that 84% of RA patients are at risk of developing hypertension. This study aims to design and develop different dosage forms (capsule-in-capsule and three-dimensional (3D) printed tablet) of nifedipine/indomethacin fixed-dose combination (FDC). The hot-melt extrusion (HME) was utilized alone and with fused deposition modeling (FDM) techniques The developed dosage forms were intended to provide delayed-extended and immediate release profiles for indomethacin and nifedipine, respectively. FDC dosage forms were successfully developed and characterized. Nifedipine formulations showed significant improvement in release profiles, having 94% of the drug release at 30 minutes compared with pure nifedipine, which had a percent release of 2%. Furthermore, the release of indomethacin was successfully delayed at a pH of 1.2 and extended at a pH of 6.8. Differential scanning calorimetry results showed endothermic crystalline peaks at 165 °C and 176 °C for indomethacin and nifedipine, respectively. Moreover, the thermal analysis of all formulations showed the absence of the endothermic peaks indicating complete solubilization of indomethacin and nifedipine in the polymeric carriers. All formulations had post-processing drug content in the range of 95% to 98%. Moreover, results from the stability study showed that all formulations were able to remain chemically and physically stable with no signs of recrystallization or degradation. The designed FDC dosage forms could improve the quality of life by enhancing patient compliance and preventing the need for polypharmacy.

Piperine-loaded nanoparticles incorporated into hyaluronic acid/sodium alginate-based membranes for the treatment of inflammatory skin diseases

Piperine is an alkaloid mostly found in the fruits of several species of the Piper genus, and its anti-inflammatory potential is already known. However, its therapeutic applications still need to be better explored due to the low aqueous solubility of this active. To overcome this drawback, the objective of this work was to evaluate the efficiency of the nanoencapsulation of the compound as well as its incorporation into hyaluronic acid/alginate-based biomembranes. Polymeric nanoparticles composed of Eudragit S100 and Poloxamer 188 were obtained by the nanoprecipitation technique, obtaining spherical nanosized particles with an average diameter of 122.1 ± 2.0 nm, polydispersity index of 0.266, and encapsulation efficiency of 76.2 %. Hyaluronic acid/sodium alginate membranes were then prepared and characterized. Regarding permeation, a slow passage rate was observed until the initial 14 h, when an exponential increase in the recovered drug concentration began to occur. The in vivo assay showed a reduction in inflammation up to 43.6 %, and no cytotoxicity was observed. The results suggested the potential of the system developed for the treatment of inflammatory skin diseases.

Carboxymethyl starch as a solid dispersion carrier to enhance the dissolution and bioavailability of piperine and 18β-glycyrrhetinic acid

OBJECTIVE

To investigate the applicability of carboxymethyl starch (CMS) as a carrier to prepare solid dispersions (SDs) of piperine (PIP) and 18β-glycyrrhetinic acid (β-GA) (PIP-CMS and β-GA-CMS SDs) and to explore the influence of drug properties on carrier selection.

SIGNIFICANCE

The low oral bioavailability of natural therapeutic molecules, including PIP and β-GA, severely restricts their pharmaceutical applications. Moreover, CMS, a natural polymer, is rarely reported as a carrier for SDs.

METHODS

PIP-CMS and β-GA-CMS SDs were prepared using the solvent evaporation method. Differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), Fourier transform infrared (FT-IR) spectroscopy, and scanning electron microscopy (SEM) were used for formulation characterization. Additionally, drug release characteristics were investigated.

RESULTS

In vitro dissolution studies showed that the dissolutions of PIP-CMS and β-GA-CMS SDs were 1.90-2.04 and 1.97-2.22 times higher than pure PIP and β-GA, respectively, at a drug:polymer ratio of 1:6. DSC, XRPD, FT-IR, and SEM analyses confirmed the formation of SDs in their amorphous states. Significant improvements in C_max and AUC_0-24 h of PIP-CMS and β-GA-CMS SDs (17.51 ± 8.15 μg/mL and 210.28 ± 117.13 μg·h/mL, respectively) and (32.17 ± 9.45 μg/mL and 165.36 ± 38.75 μg·h/mL, respectively) were observed in the pharmacokinetic study. Compared with weakly acidic β-GA, loading weakly basic PIP seemed to have a profound effect on stability through intermolecular forces.

CONCLUSIONS

Our findings showed CMS could be a promising carrier for SDs, and loading weakly basic drug may be more suitable, especially in binary SDs system.

A systematic and robust assessment of hot-melt extrusion-based amorphous solid dispersions: Theoretical prediction to practical implementation

Amorphous solid dispersions (ASDs) have gained attention as a formulation strategy in recent years, with the potential to improve the apparent solubility and, hence, the oral bioavailability of poorly soluble drugs. The process of formulating ASDs is commonly faced with challenges owing to the intrinsic physical and chemical instability of the initial amorphous form and the long-term physical stability of drug formulations. Numerous research publications on hot-melt extrusion (HME) technology have demonstrated that it is the most efficient approach for manufacturing reasonably stable ASDs. The HME technique has been established as a faster scale-up production strategy for formulation evaluation and has the potential to minimize the time to market. Thermodynamic evaluation and theoretical predictions of drug-polymer solubility and miscibility may assist to reduce the product development cost by HME. This review article highlights robust and established prediction theories and experimental approaches for the selection of polymeric carriers for the development of hot melt extrusion based stable amorphous solid dispersions (ASDs). In addition, this review makes a significant contribution to the literature as a pilot guide for ASD assessment, as well as to confirm the drug-polymer compatibility and physical stability of HME-based formulations.

Comparison in Content of Total Polyphenol, Flavonoid, and Antioxidant Capacity from Different Organs and Extruded Condition of Moringa oleifera Lam

Recently, interest in exploring phytochemicals with health benefits has grown significantly. In this research, we aimed to develop the processing profile and functionality of Moringa oleifera Lam. Here, we implemented biopolymer-mediated extrudate formulations of M. oleifera (leaves, seed, and husk) in order to enhance the phenolic, flavonoid, and antioxidant capacity. The formulation-1 (F1) was prepared for leaves, seed, and husk using biopolymers (10% w/w), namely: whey protein isolate (10% w/w) and lecithin (5% w/w) with vitamin E (2% w/w). The formulation-2 (F2) was composed of lecithin (5% w/w) with ascorbyl palmitate (10% w/w) and vitamin E (2% w/w), processed by hot-melt extrusion (HME). It was observed that the total phenol and flavonoid contents were persistent in the lecithin-mediated F2 formulation of leaves, seed, and husk. Likewise, antioxidant capacity was significantly stayed in the F2 formulation of all organs, compared to the extrudate and control. The IC50 values revealed that the leaves of the F2 formulation showed strong free radical scavenging capacity compared to the F2 formulation of seed and husk. It was concluded that the F2 formulation could be used in the different parts of M. oleifera processing to boost functionality.

Pectin coated Nanostructured Lipid Carriers for Targeted Piperine Delivery to Hepatocellular Carcinoma

Piperine (PIP) is a herbal drug with well-known anticancer activity against different types of cancer including hepatocellular carcinoma. However, low aqueous solubility and extensive first-pass metabolism limit its clinical use. In this study, positively charged PIP-loaded nanostructured lipid carriers (PIP-NLCs) were prepared via melt-emulsification and ultra-sonication method followed by pectin coating to get novel pectin-coated NLCs (PIP-P-NLCs) targeting hepatocellular carcinoma. Complete in vitro characterization was performed. In addition, cytotoxicity and cellular uptake of nanosystems in HepG2 cells were evaluated. Finally, in vivo anticancer activity was tested in the diethylnitrosamine-induced hepatocellular carcinoma mice model. Successful pectin coating was confirmed by an increased particle size of PIP-NLCs from 150.28±2.51 nm to 205.24±5.13 nm and revered Zeta potential from 33.34±3.52 mV to -27.63±2.05 mV. Nanosystems had high entrapment efficiency, good stability, spherical shape, and sustained drug release over 24 hours. Targeted P-NLCs enhanced the cytotoxicity and cellular uptake compared to untargeted NLCs. Furthermore, PIP-P-NLCs improved in vivo anticancer effect of PIP as proved by histological examination of liver tissues, suppression of liver enzymes and oxidative stress environment in the liver, and alteration of cell cycle regulators. To conclude, PIP-P-NLCs can act as a promising approach for targeted delivery of PIP to hepatocellular carcinoma.

Crystal Structure, Solubility, and Pharmacokinetic Study on a Hesperetin Cocrystal with Piperine as Coformer

Hesperetin (HES) is a key biological active ingredient in citrus peels, and is one of the natural flavonoids that attract the attention of researchers due to its numerous therapeutic bioactivities that have been identified in vitro. As a bioenhancer, piperine (PIP) can effectively improve the absorption of insoluble drugs in vivo. In the present study, a cocrystal of HES and PIP was successfully obtained through solution crystallization. The single-crystal structure was illustrated and comprehensive characterization of the cocrystal was conducted. The cocrystal was formed by two drug molecules at a molar ratio of 1:1, which contained O–H–O hydrogen bonds between the carbonyl and ether oxygen of PIP and the phenolic hydroxyl group of HES. In addition, a solubility experiment was performed on powder cocrystal in simulated gastrointestinal fluid, and the result revealed that the cocrystal improves the dissolution behavior of HES compared with that of the pure substance. Furthermore, HES’s bioavailability in the cocrystal was six times higher than that of pristine drugs. These results may provide an efficient oral formulation for HES.

The potential of natural products use in fused deposition modeling 3D printing of pharmaceutical dosage forms

In recent years, the interest in 3D printing of medicines has increased due to many advantages of this technology, such as flexibility of the dose and dosage form of the printed product. Fused deposition modeling (FDM) is one of the most popular 3D printing technologies in the pharmaceutical field, due to its low cost and simplicity. The subject of this review is the potential use of natural products as biodegradable and biocompatible materials with good safety profiles in FDM 3D printing of pharmaceuticals. Natural products such as alginate, chitosan and starch have already been employed as excipients in FDM 3D printed pharmaceutical dosage forms, while others like shellac and zein show the potential, but haven't yet been part of 3D printed pharmaceutical formulations. These excipients have different roles in the formulation of filaments for FDM 3D printing, for example as fillers, matrix carriers or drug-release modifiers. In addition, the possibility of incorporating active pharmaceutical ingredients of natural origin in filaments for FDM 3D printing was reviewed. High printing temperatures limit the use of natural products in FDM 3D printing. However, adequate selection of thermoplastic material and printing parameters can widen the use of natural products in FDM 3D printing of pharmaceutical dosage forms.

A review on the bioavailability, bio-efficacies and novel delivery systems for piperine

As the major naturally occurring alkaloid in pepper with a pungent taste, piperine is known for its beneficial biological functions and therapeutic effects. In this work, the bioavailability and biological activities of piperine were presented and discussed. Novel delivery systems for enhancing the bioavailability of piperine were also reviewed. This study could provide a better understanding of the physiological and biochemical aspects of piperine to be further developed in the food and nutraceutical industries.

Eudragit®: A Versatile Family of Polymers for Hot Melt Extrusion and 3D Printing Processes in Pharmaceutics

Eudragit® polymers are polymethacrylates highly used in pharmaceutics for the development of modified drug delivery systems. They are widely known due to their versatility with regards to chemical composition, solubility, and swelling properties. Moreover, Eudragit polymers are thermoplastic, and their use has been boosted in some production processes, such as hot melt extrusion (HME) and fused deposition modelling 3D printing, among other 3D printing techniques. Therefore, this review covers the studies using Eudragit polymers in the development of drug delivery systems produced by HME and 3D printing techniques over the last 10 years. Eudragit E has been the most used among them, mostly to formulate immediate release systems or as a taste-masker agent. On the other hand, Eudragit RS and Eudragit L100-55 have mainly been used to produce controlled and delayed release systems, respectively. The use of Eudragit polymers in these processes has frequently been devoted to producing solid dispersions and/or to prepare filaments to be 3D printed in different dosage forms. In this review, we highlight the countless possibilities offered by Eudragit polymers in HME and 3D printing, whether alone or in blends, discussing their prominence in the development of innovative modified drug release systems.

Combinations of Piperine with Hydroxypropyl-β-Cyclodextrin as a Multifunctional System

Piperine is an alkaloid that has extensive pharmacological activity and impacts other active substances bioavailability due to inhibition of CYP450 enzymes, stimulation of amino acid transporters and P-glycoprotein inhibition. Low solubility and the associated low bioavailability of piperine limit its potential. The combination of piperine with 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) causes a significant increase in its solubility and, consequently, an increase in permeability through gastrointestinal tract membranes and the blood-brain barrier. X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR) were used to characterize interactions between piperine and HP-β-CD. The observed physicochemical changes should be combined with the process of piperine and CD system formation. Importantly, with an increase in solubility and permeability of piperine as a result of interaction with CD, it was proven to maintain its biological activity concerning the antioxidant potential (2,2-diphenyl-1-picryl-hydrazyl-hydrate assay), inhibition of enzymes essential for the inflammatory process and for neurodegenerative changes (hyaluronidase, acetylcholinesterase, butyrylcholinesterase).

Hot melt extrusion: An emerging manufacturing method for slow and sustained protein delivery

With the rapid development of the biopharmaceutical industry, an increasing number of new therapeutic protein products (TPPs) have been approved by the FDA and many others are under pre-clinical and clinical evaluation. A major limitation of biopharmaceuticals is their limited half-life when administered systemically. A one-time, implantable, sustained protein delivery device would be advantageous in order to improve the quality of life of patients. Hot melt extrusion (HME) is a mature technology that has been extensively used for a broad spectrum of applications in the polymer and pharmaceutical industry and has achieved success as evidenced by a variety of FDA-approved commercial products. These commercial products are mostly for sustained delivery of small molecule therapeutics, leaving a significant gap for HME formulation of therapeutic proteins. With the increasing need of sustained TPP delivery, HME shows promise as a downstream processing method due to its high efficiency and economic value. Several challenges remain for the application of HME in protein delivery. Progress of HME for protein delivery, challenges encountered, and potential solutions will be detailed in this review article. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Biology-Inspired Nanomaterials > Protein and Virus-Based Structures.

Triple Strategies to Improve Oral Bioavailability by Fabricating Coamorphous Forms of Ursolic Acid with Piperine: Enhancing Water-Solubility, Permeability, and Inhibiting Cytochrome P450 Isozymes

As a BCS IV drug, ursolic acid (UA) has low oral bioavailability mainly because of its poor aqueous solubility/dissolution, poor permeability, and metabolism by cytochrome P450 (CYP) isozymes, such as CYP3A4. Most UA preparations demonstrated a much higher dissolution than that of its crystalline form yet a low drug concentration in plasma due to their lower consideration or evaluation for the permeability and metabolism issues. In the current study, a supramolecular coamorphous system of UA with piperine (PIP) was prepared and characterized by powder X-ray diffraction, differential scanning calorimetry, and scanning electron microscopy. In comparison to crystalline UA and UA in physical mixture, such coamorphous system enhanced solubility (5.3-7-fold in the physiological solution) and dissolution (7-8-fold in the physiological solution within 2 h) of UA and exhibited excellent physical stability under 90-day storage conditions. More importantly, the pharmacokinetic study of coamorphous UA in rats exhibited 5.8-fold and 2.47-fold improvement in AUC0-∞ value, respectively, compared with its free and mixed crystalline counterparts. In order to further explore the mechanism of such improvement, the molecular interactions of a coamorphous system in the solid state were investigated. Fourier transform infrared spectroscopy, solid-state 13C nuclear magnetic resonance spectroscopy, and density functional theory modeling suggested that intermolecular hydrogen bonds with strong interactions newly formed between UA and PIP after coamorphization. The in vitro permeability studies across Caco-2 cell monolayer and metabolism studies by rat hepatic microsomes indicated that free PIP significantly increased the permeability of UA and inhibited the enzymatic metabolism of UA by CYP3A4. However, PIP in the coamorphous combination exhibited a much lower level in the bioenhancing than its free form arising from the synchronized dissolution characteristic of the preparation (only 60% of PIP released in comparison to its free counterpart in 2 h). The in situ loop study in rats proposed that the acid-sensitive dissolution in the stomach of the coamorphous preparation helped to improve the effective free drug concentration, thereby facilitating PIP to play its role in bioenhancing. The current study offers an exploratory strategy to overcome poor solubility/dissolution, poor permeability, and metabolism by cytochrome P450 isozymes of the BCS IV drug to improve its oral bioavailability.

Development of a Highly Water-Soluble Lycopene Cyclodextrin Ternary Formulation by the Integrated Experimental and Modeling Techniques

Lycopene, the aliphatic hydrocarbon carotenoid with abundant bioactivities, has instability, extremely poor water solubility, and low oral bioavailability. The study aimed to develop a highly water-soluble and practical lycopene formulation to improve the oral bioavailability and efficiency of lycopene. Environment-friendly hot-melt extrusion (HME) technique was applied to fabricate lycopene-cyclodextrin-polyethylene glycol 6000 (PEG 6000) ternary systems, which possessed highly aqueous solubility (897.665 μg mL^-1), almost 32-fold higher than that of the reported lycopene binary inclusion (27.1 ± 3.2 μg mL^-1). The dissolution rate was significantly accelerated compared to pure lycopene. The molecular mechanism was further investigated by the integrated experimental and modeling tools. Molecular dynamics (MD) simulation revealed lycopene molecule was wrapped within the aggregates of hydroxypropyl-beta-cyclodextrin (HP-β-CD) and PEG 6000 through extensive hydrogen bond interactions, which was experimentally validated by DSC, XRD, and FTIR spectrum analysis. The third component PEG 6000 facilitated the process of HME and augmented hydrogen bond interactions with HP-β-CD. Moreover, lycopene inclusions exhibited significant antitumor activity via inhibiting cell proliferation and inducing apoptosis. The pharmacokinetic studies showed the relative bioavailability of lycopene ternary preparation was up to 313.08% and the C_max was 4.9-fold higher than that of the marketed tablet. In conclusion, the lycopene cyclodextrin ternary formulation developed by the modified HME techniques is suitable for industrial production, while PEG 6000 plays a vital part in the multicomponent systems to increase solubility, dissolution rate, and oral bioavailability of lycopene. The combination of experimental and computational tools is able to benefit the development of multicomponent formulations accurately and effectively.

Potential of solid dispersions to enhance solubility, bioavailability, and therapeutic efficacy of poorly water-soluble drugs: newer formulation techniques, current marketed scenario and patents

In the last few decades, solid dispersion (SD) technology had been studied as an approach to produce an amorphous carrier to enhance the solubility, dissolution rate, and bioavailability of poorly water-soluble drugs. The use of suitable carrier and methodology in the preparation of SDs play a significant role in the biological behavior of the SDs. SDs have been prepared using a variety of pharmaceutically acceptable polymers utilizing various novel technologies. In the recent years, much attention has been paid toward the use of novel carriers and methodologies in exploring novel types of SDs to enhance therapeutic efficacy and bioavailability. The use of novel carriers and methodologies would be very beneficial for formulation scientists to develop some SDs-based formulations for their commercial use and clinical applications. In the present review, current literature of novel methodologies for SD preparation to enhance the dissolution rate, solubility, therapeutic efficacy, and bioavailability of poorly water-soluble drugs has been summarized and analyzed. Further, the current status of SDs, patent status, and future prospects have also been discussed.

Amorphous systems for delivery of nutraceuticals: challenges opportunities

Amorphous solid products have recently gained a lot of attention as key solutions to improve the solubility and bioavailability of poorly soluble nutraceuticals. A pure amorphous drug is a high-energy form; physically/chemically unstable and so easily gets recrystallized into the less soluble crystalline form limiting solubility and bioavailability issues. Amorphous solid dispersion and co-amorphous are new formulation approach that stabilized unstable amorphous form through different mechanisms such as preventing mobility, high glass transition temperature and molecular interaction. Nutraceuticals have been received the utmost importance due to their health benefits. However, most of these compounds have been associated with poor oral bioavailability due to poor solubility, high lipophilicity, high melting point, poor permeability, degradability and rapid metabolism in the gastrointestinal tract (GIT) which limits its health benefits. This review provides us a systematic application of amorphous systems to the delivery of poorly soluble nutraceuticals, with the aim of overcoming their pharmacokinetic limitations and improved pharmacological potential. In particular, it describes the challenges associated with delivery of oral nutraceuticals, various methods involved in the preparation and characterization of amorphous systems and permeability enhancement of nutraceuticals are in detail.

Formulation and Evaluation of Supramolecular Food-Grade Piperine HP β CD and TPGS Complex: Dissolution, Physicochemical Characterization, Molecular Docking, In Vitro Antioxidant Activity, and Antimicrobial Assessment

The purpose of the present study was to improve the aqueous solubility, dissolution, and antioxidant activity of the water-insoluble drug piperine (PIP). The study was performed by preparing PIP binary inclusion complex (PIP BIC) and piperine ternary inclusion complex (PIP TIC) by different methods. The effect of a hydrophilic auxiliary substance (TPGS) was assessed with addition to PIP and hydroxypropyl beta cyclodextrin (HP β CD) complex. The phase solubility study was performed to evaluate the complexation efficiency and stability constant. The aqueous solubility, dissolution, physicochemical assessment, antioxidant activity, antimicrobial activity, and molecular docking were further evaluated to check the effect of the complexation of PIP. The stability constant (Ks) value was found to be 238 and 461 M⁻¹ for the binary and ternary inclusion complex. The dissolution study results showed a marked enhancement of release in comparison to pure drug. XRD and SEM studies revealed the presence of more agglomerated and amorphous structures of PIP, which confirmed the formation of complexes. The results of DPPH radical scavenging and antimicrobial activity showed a significant (p < 0.05) enhancement in scavenging activity for PIP TIC (microwave irradiation (MI)). The docking studies have revealed that the binding affinity of TPGS at the PIP-HP β CD complex was −5.2 kcal/mol.

Improved Solubility and Dissolution Rates in Novel Multicomponent Crystals of Piperine with Succinic Acid

The objectives of this study were to prepare and characterize a novel piperine–succinic acid multicomponent crystal phase and to evaluate the improvement in the solubility and dissolution rate of piperine when prepared in the multicomponent crystal formation. The solid-state characterization of the novel multicomponent crystal was performed by powder X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform-infrared (FT-IR) spectroscopy. Solubility and dissolution rate profiles were evaluated in distilled water. The physical stability was evaluated under high relative humidity (75% and 100% RH). The determination of the single crystal X-ray diffraction structure revealed that this novel multicomponent crystal was a cocrystalline phase of piperine–succinic acid (2:1 molar ratio). The differential scanning calorimetry thermogram of the cocrystal showed a single and sharp endothermic peak at 110.49 °C. The cocrystal resulted in greater solubility and a faster dissolution rate of piperine than intact piperine. This improvement was a result of the formation of a channel structure in the cocrystal. In addition, the cocrystal was stable under a humid condition.

Piperine-loaded nanoparticles with enhanced dissolution and oral bioavailability for epilepsy control

Piperine, an alkaloid from black pepper, has demonstrated beneficial effects in central nervous system, especially in epilepsy control. However, its therapeutic application remains limited due to the low aqueous solubility of piperine. Thus, the present study aimed to formulate piperine into a more solubilized form to enhance its oral bioavailability and facilitate its development as a potential anti-epileptic treatment. The nanoprecipitation method was applied to prepare piperine nanoparticles, which were then examined under transmission electron microscopy. A spherical nanosized particle was obtained with small particle size (average particle size 130.20 ± 1.57 nm), narrow size distribution (polydispersity index 0.195 ± 0.002) and efficient entrapment (entrapment efficiency 92.2 ± 2.5%). Compared with the unformulated piperine, nanosized piperine had a much faster dissolution rate with 3 times higher accumulated drug release after 24 h. After oral administration at 3.5 mg/kg in rats, the nanosized piperine formulations could improve its oral bioavailability by 2.7-fold with 16 times higher concentrations in brain at 10 h postdosing. Moreover, the piperine nanoparticles exhibited effective protection against pentylenetetrazol-induced seizures in both zebrafish and mice. In summary, the present study provided a simple formulation strategy for oral administration of piperine to overcome its limitation in water solubility. The developed formulations could effectively enhance oral bioavailability of piperine with promising anti-epileptic effect, which could be applied as a potential therapy in epilepsy control.

Piperine: role in prevention and progression of cancer

Cancer is among the leading causes of death worldwide. Several pharmacological protocols have been developed in order to block tumor progression often showing partial efficacy and severe counterproductive effects. It is now conceived that a healthy lifestyle coupled with the consumption of certain phytochemicals can play a protective role against tumor development and progression. According to this vision, it has been introduced the concept of "chemoprevention". This term refers to natural agents with the capability to interfere with the tumorigenesis and metastasis, or at least, attenuate the cancer-related symptoms. Piperine (1-Piperoylpiperidine), a main extract of Piper longum and Piper nigrum, is an alkaloid with a long history of medicinal use. In fact, it exhibits a variety of biochemical and pharmaceutical properties, including chemopreventive activities without significant cytotoxic effects on normal cells, at least at doses < of 250 µg/ml. The aim of this review is to discuss the relevant molecular and cellular mechanisms underlying the chemopreventive action of this natural alkaloid.

PVP VA64 as a novel release-modifier for sustained-release mini-matrices prepared via hot melt extrusion

The purpose of this study was to explore poly(vinylpyrrolidone-co-vinyl acetate) (PVP VA64) as a novel release-modifier to tailor the drug release from ethylcellulose (EC)-based mini-matrices prepared via hot melt extrusion (HME). Quetiapine fumarate (QF) was selected as model drug. QF/EC/PVP VA64 mini-matrices were extruded with 30% drug loading. The physical state of QF in extruded mini-matrices was characterized using differential scanning calorimetry, X-ray powder diffraction, and confocal Raman microscopy. The release-controlled ability of PVP VA64 was investigated and compared with that of xanthan gum, crospovidone, and low-substituted hydroxypropylcellulose. The influences of PVP VA64 content and processing temperature on QF release behavior and mechanism were also studied. The results indicated QF dispersed as the crystalline state in all mini-matrices. The release of QF from EC was very slow as only 4% QF was released in 24 h. PVP VA64 exhibited the best ability to enhance the drug release as compared with other three release-modifiers. The drug release increased to 50-100% in 24 h with the addition of 20-40% PVP VA64. Increasing processing temperature slightly slowed down the drug release by decreasing free volume and pore size. The release kinetics showed good fit with the Ritger-Peppas model. The values of release exponent (n) increased as PVP VA64 is added (0.14 for pure EC, 0.41 for 20% PVP VA64, and 0.61 for 40% PVP VA64), revealing that the addition of PVP VA64 enhanced the erosion mechanism. This work presented a new polymer blend system of EC with PVP VA64 for sustained-release prepared via HME.

Recent Perspectives in Hot Melt Extrusion-Based Polymeric Formulations for Drug Delivery: Applications and Innovations

Hot melt extrusion (HME), a technology which mixing the advantages of solid dispersion technology and mechanical preparation, is accepted in varied applications in pharmaceutical formulations. When combined with other techniques, such as nanotechnique, three-dimensional printing, and co-extrusion, HME becomes much more multifunctional in the application of drug delivery. While in most cases, polymers employed in HME are responsible for the final property of products. The process of HME together with the selection of materials employed in HME were described briefly. In addition, the applications of HME in drug delivery and its currently status in the pharmaceutical field were also included. Some commercial products produced by HME have met the approval of FDA, indicating the commercial viability of this technique. Although showing great potential in pharmaceutical manufacturing, HME is still challenged by high temperature, shear force, and high input energy. Development of equipment, modifying the parameters, and optimization of polymeric formulations are needed for a safe, effective, and multifunctional hot melt extrusion drug delivery system. Also, wider range of combinations between HME and other techniques may provide guideline for developing multiple applications in drug delivery.

A nano-cocrystal strategy to improve the dissolution rate and oral bioavailability of baicalein

Baicalein (BE) is one of the main active flavonoids representing the variety of pharmacological effects including anticancer, anti-inflammatory and cardiovascular protective activities, but it's very low solubility, dissolution rate and poor oral absorption limit the therapeutic applications. In this work, a nano-cocrystal strategy was successfully applied to improve the dissolution rate and bioavailability of BE. Baicalein-nicotinamide (BE-NCT) nano-cocrystals were prepared by high pressure homogenization and evaluated both in vitro and in vivo. Physical characterization results including scanning electron microscopy, dynamic light scattering, powder X-ray diffraction and differential scanning calorimetry demonstrated that BE-NCT nano-cocrystals were changed into amorphous state with mean particle size of 251.53 nm. In the dissolution test, the BE-NCT nano-cocrystals performed 2.17-fold and 2.54-fold enhancement than BE coarse powder in FaSSIF-V2 and FaSSGF. Upon oral administration, the integrated AUC_0 − t of BE-NCT nano-cocrystals (6.02-fold) was significantly higher than BE coarse powder (1-fold), BE-NCT cocrystals (2.87-fold) and BE nanocrystals (3.32-fold). Compared with BE coarse powder, BE-NCT cocrystals and BE nanocrystals, BE-NCT nano-cocrystals possessed excellent performance both in vitro and in vivo evaluations. Thus, it can be seen that nano-cocrystal is an appropriate novel strategy for improving dissolution rate and bioavailability of poor soluble natural products such as BE.

Piperine-mediated drug interactions and formulation strategy for piperine: recent advances and future perspectives

INTRODUCTION

Piperine has various pharmacological effects and can modulate the functional activity of metabolic enzymes and drug transporters. Consequently, there is a great interest in the application of piperine as an alternative medicine or bioavailability enhancer. Areas covered: This review deals with the effects of piperine on metabolizing enzymes and drug transporters. It provides the readers with an update on transporter-mediated and also metabolic enzyme-mediated piperine-drug interactions, with emphasis on its in vivo implications. This article also encompasses recent advances in the formulation approaches and technologies for optimizing the delivery of piperine. Expert opinion: Piperine can influence the pharmacokinetics of coadministered drugs, which may result in a therapeutically beneficial or adverse effect. Given that piperine inhibits or stimulates the activity of metabolic enzymes and transporters depending on the treatment conditions, the clinical significance of piperine-drug interactions should be assessed by varying the dose, dosing frequency, and the duration of treatment. In particular, better understanding the clinical relevance of piperine-drug interactions based on long-term assessments will provide a strong basis for the feasibility and applicability of piperine as a bioenhancer or a health-promoting agent. The development of effective formulations is also critical to facilitate the therapeutic applications of piperine.

Preparation and evaluation of curcumin-loaded self-assembled micelles

OBJECTIVE

Curcumin being used to treat various chronic diseases while its poor bioavailability issue limited its wide clinical application as a therapeutic agent. The aim of this work was to prepare curcumin-loaded self-assembled micelles using soluplus and solutol^®HS15 (SSCMs) to enhance curcumin's solubility and thus oral bioavailability.

METHODS

Optimum formulation was investigated and the optimized ratio of drugs and excipients was obtained and the SSCMs were prepared via ethanol solvent evaporation method. The optimal SSCMs were characterized by transmission electron microscopy, drug content analysis including loading efficiency (LE%) and entrapment efficiency (EE%), and the cumulative amount of curcumin released from the micelles were all calculated using HPLC method. The in vitro cytotoxicity and the permeability of SSCMs were measured by Caco-2 cell monolayers and the oral bioavailability was evaluated by SD rats.

KEY FINDINGS

The solubility of curcumin in self-assembled micelles was dramatically increased by 4200 times as compared to free curcumin. Caco-2 cells transport experiment exhibited that while soluplus and solutol^®HS15 were self-assembled into micelles, it could not only promote the permeability of curcumin across membrane for better absorption, but also could restrain the curcumin pumped outside due to the role of P-gp efflux mechanism of soluplus and solutol^®HS15. Furthermore, the prepared SSCMs formulation was almost nontoxic and had safety performance on Caco-2 cells model. Moreover, curcumin's oral bioavailability of SSCMs formulation in SD rats had doubled than that of free curcumin.

CONCLUSIONS

The prepared SSCMs were characterized by PS, PDI, LE%, EE% data analysis. After the soluplus and solutol^®HS15 were self assembled into micelles, both the solubility and membrane permeability of curcumin were evaluated to have been enhanced, as well as the effect of efflux pump of curcumin was inhibited, hence to promote oral absorption and generate an increased bioavailability.

Melt-Cast Noninvasive Ocular Inserts for Posterior Segment Drug Delivery

The objective of the present study was to evaluate the utility of melt-cast, topical, ocular inserts for delivery of drugs with different physicochemical properties. The model drugs tested include indomethacin (IN), ciprofloxacin hydrochloride, and prednisolone sodium phosphate. Melt-cast method was used to fabricate ophthalmic inserts. Polyethylene oxide N10, a semicrystalline thermoplastic polymer (polyethylene oxide N10; Mol. wt: 100 kDa) was used as the matrix-forming material. Polymeric insert units (4 × 2 × 0.2 mm) with a 10% w/w drug load were tested for in vitro release, transmembrane permeability, and in vivo ocular tissue distribution. Marketed ophthalmic solutions were used as control solutions. Drug content in all the formulations ranged between 93% and 102% of the theoretical value. Transmembrane flux of IN, prednisolone sodium phosphate, and ciprofloxacin hydrochloride was enhanced by ∼3.5-folds, ∼3.6-folds, and ∼2.9-folds, respectively, from the polymeric inserts compared with the control formulations, after 3 h. Moreover, ocular inserts generated significantly higher drug levels in all the ocular tissues, including the retina-choroid, compared with their control formulations. The melt-cast ophthalmic inserts show promise as an effective noninvasive ocular drug delivery platform, which will be highly beneficial in the intervention and treatment of a wide variety of ocular complications.