Lipophilicity and hydrophobicity considerations in bio-enabling oral formulations approaches – a PEARRL review

A study of hydrophobic domain formation of polymeric drug precipitation inhibitors in aqueous solution

Despite the widespread use of polymers as precipitation inhibitors in supersaturating drug formulations, the current understanding of their mechanisms of action is still incomplete. Specifically, the role of hydrophobic drug interactions with polymers by considering possible supramolecular conformations in aqueous dispersion is an interesting topic. Accordingly, this study investigated the tendency of polymers to create hydrophobic domains, where lipophilic compounds may nest to support drug solubilisation and supersaturation. Fluorescence spectroscopy with the environment-sensitive probe pyrene was compared with atomistic molecular dynamics simulations of the model drug fenofibrate (FENO). Subsequently, kinetic drug supersaturation and thermodynamic solubility experiments were conducted. As a result, the different polymers showed hydrophobic domain formation to a varying degree and the molecular simulations supported interpretation of fluorescence spectroscopy data. Molecular insights were gained into the conformational structure of how the polymers interacted with FENO in solution phase, which apart from nucleation and crystal growth effects, determined drug concentrations in solution. Notable was that even at the lowest polymer concentration of 0.01 %, w/v, there were polymer-specific solubilisation effects of FENO observed and the resulting reduction in apparent drug supersaturation provided relevant knowledge both from a mechanistic and practical perspective.

Carriers for hydrophobic drug molecules: lipid-coated hollow mesoporous silica particles, and the influence of shape and size on encapsulation efficiency

Hydrophobic drugs, while designed to interact with specific receptors or enzymes located in lipid-rich cell membranes, often face challenges of limited bioavailability and insufficient circulation time due to their insolubility in aqueous environments. One plausible pathway to increase their blood circulation time is to load these drugs into biocompatible and hydrophilic carriers to enhance their uptake. In this study, mesoporous silica (mSiO2) nanocarriers of various morphologies (including cubes, capsules, and spheres) were synthesized. These nanocarriers were then surface-functionalized with alkyl chain hydrocarbons, specifically octadecyl-trimethoxysilane, (OCH3)3Si(CH2)17CH3, to render them hydrophobic. The resulting nanocarriers (((OCH3)3Si(CH2)17CH3)@mSiO2) showed up to 80% uptake for hydrophobic drugs. However, a significant drawback was observed as most of the drugs were prone to uncontrollable release within 6 h. This challenge of premature drug release was successfully mitigated by effectively sealing the drug-loaded nanocarriers with a pH-sensitive lipid overlayer. The lipid-coated nanocarriers prolonged drug containment and sustained release up to 72 h, compared to 6 h for uncoated nanocarriers, thereby facilitating longer blood circulation times. Moreover, the shape and size of nanocarriers were found to influence both drug entrapment capacity and release behavior with cubic forms exhibiting superior loading capacity due to higher surface area and porosity. Additionally, it was observed that the molecular weight and chemical structure of the drug molecules played a crucial role in determining their uptake and release profiles. Furthermore, the influence of different morphologies of nanocarriers on cell uptake and cytotoxicity in immune cells was elucidated. These findings underscore the importance of nanocarrier morphology and drug properties to enhance loading capacities and controlled release profiles, for designing drug delivery systems tailored for hydrophobic drugs.

Rationalizing Counterion Selection for the Development of Lipophilic Salts: A Case Study with Venetoclax

The use of lipid-based formulations (LBFs) can be hindered by low dose loading due to solubility limitations of candidate drugs in lipid vehicles. Formation of lipophilic salts through pairing these drugs with a lipophilic counterion has been demonstrated as a potential means to enhance dose loading in LBFs. This study investigated the screening of appropriate counterions to form lipophilic salts of the BCS class IV drug venetoclax. The physical properties, lipid solubility, and in vitro performance of the salts were analyzed. This study illustrated the versatility of alkyl sulfates and sulfonates as suitable counterions in lipophilic salt synthesis with up to ∼9-fold higher solubility in medium- and long-chain LBFs when compared to that of the free base form of venetoclax. All salts formulated as LBFs displayed superior in vitro performance when compared to the free base form of the drug due to the higher initial drug loadings in LBFs and increased affinity for colloidal species. Further, in vitro studies confirmed that venetoclax lipophilic salt forms using alkyl chain counterions demonstrated comparable in vitro performance to venetoclax docusate, thus reducing the potential for laxative effects related to docusate administration. High levels of the initial dose loading of venetoclax lipophilic salts were retained in a molecularly dispersed state during dispersion and digestion of the formulation, while also demonstrating increased levels of saturation in biorelevant media. The findings of this study suggest that alkyl chain sulfates and sulfonates can act as a suitable alternative counterion to docusate, facilitating the selection of counterions that can unlock the potential to formulate venetoclax as an LBF.

Comparative Analysis of Chemical Descriptors by Machine Learning Reveals Atomistic Insights into Solute-Lipid Interactions

This study explores the research area of drug solubility in lipid excipients, an area persistently complex despite recent advancements in understanding and predicting solubility based on molecular structure. To this end, this research investigated novel descriptor sets, employing machine learning techniques to understand the determinants governing interactions between solutes and medium-chain triglycerides (MCTs). Quantitative structure-property relationships (QSPR) were constructed on an extended solubility data set comprising 182 experimental values of structurally diverse drug molecules, including both development and marketed drugs to extract meaningful property relationships. Four classes of molecular descriptors, ranging from traditional representations to complex geometrical descriptions, were assessed and compared in terms of their predictive accuracy and interpretability. These include two-dimensional (2D) and three-dimensional (3D) descriptors, Abraham solvation parameters, extended connectivity fingerprints (ECFPs), and the smooth overlap of atomic position (SOAP) descriptor. Through testing three distinct regularized regression algorithms alongside various preprocessing schemes, the SOAP descriptor enabled the construction of a superior performing model in terms of interpretability and accuracy. Its atom-centered characteristics allowed contributions to be estimated at the atomic level, thereby enabling the ranking of prevalent molecular motifs and their influence on drug solubility in MCTs. The performance on a separate test set demonstrated high predictive accuracy (RMSE = 0.50) for 2D and 3D, SOAP, and Abraham Solvation descriptors. The model trained on ECFP4 descriptors resulted in inferior predictive accuracy. Lastly, uncertainty estimations for each model were introduced to assess their applicability domains and provide information on where the models may extrapolate in chemical space and, thus, where more data may be necessary to refine a data-driven approach to predict solubility in MCTs. Overall, the presented approaches further enable computationally informed formulation development by introducing a novel in silico approach for rational drug development and prediction of dose loading in lipids.

Enabling superior drug loading in lipid-based formulations with lipophilic salts for a brick dust molecule: Exploration of lipophilic counterions and in vitro-in vivo evaluation

Lipid-based formulations (LbFs) are an extensively used approach for oral delivery of poorly soluble drug compounds in the form of lipid suspension and lipid solution. However, the high target dose and inadequate lipid solubility limit the potential of brick dust molecules to be formulated as LbFs. Thus, the complexation of such molecules with a lipophilic counterion can be a plausible approach to improve the solubility in lipid-based solutions via reducing drug crystallinity and polar surface area. The study aimed to enhance drug loading in lipid solution for Nilotinib (Nil) through complexation or salt formation with different lipophilic counterions. We synthesized different lipophilic salts/ complexes via metathesis reactions and confirmed their formation by 1H NMR and FTIR. Docusate-based lipophilic salt showed improved solubility in medium-chain triglycerides (∼7 to 7.5-fold) and long-chain triglycerides (∼30 to 35-fold) based lipids compared to unformulated crystalline Nil. The increased lipid solubility could be attributed to the reduction in drug crystallinity which was further confirmed by the PXRD and DSC. Prototype LbFs were prepared to evaluate drug loading and their physicochemical characteristics. The findings suggested that structural features of counterion including chain length and lipophilicity affect the drug loading in LbF. In addition, physical stability testing of formulations was performed, inferring that aliphatic sulfate-based LbFs were stable with no sign of drug precipitation or salt disproportionation. An in vitro lipolysis-permeation study revealed that the primary driver of absorptive flux is the solubilization of the drug and reduced amount of lipid. Further, the in vivo characterization was conducted to measure the influence of increased drug load on oral bioavailability. Overall, the results revealed enhanced absorption of lipophilic salt-based LbF over unformulated crystalline Nil and conventional LbF (drug load equivalent to equilibrium solubility) which supports the idea that lipophilic salt-based LbF enhances drug loading, and supersaturation-mediated drug solubilization, unlocking the full potential of LbF.

High loading of lipophilic compounds in mesoporous silica for improved solubility and dissolution performance

Loading poorly soluble active pharmaceutical ingredients (API) into mesoporous silica can enable API stabilization in non-crystalline form, which leads to improved dissolution. This is particularly beneficial for highly lipophilic APIs (log D7.4 > 8) as these drugs often exhibit limited solubility in dispersion forming carrier polymers, resulting in low drug load and reduced solid state stability. To overcome this challenge, we loaded the highly lipophilic natural products coenzyme Q10 (CoQ10) and astaxanthin (ASX), as well as the synthetic APIs probucol (PB) and lumefantrine (LU) into the mesoporous silica carriers Syloid® XDP 3050 and Silsol® 6035. All formulations were physically stable in their non-crystalline form and drug loads of up to 50 % were achieved. At increasing drug loads, a marked increase in equilibrium solubility of the active ingredients in biorelevant medium was detected, leading to improved performance during biorelevant biphasic dissolution studies (BiPHa + ). Particularly the natural products CoQ10 and ASX showed substantial benefits from being loaded into mesoporous carrier particles and clearly outperformed currently available commercial formulations. Performance differences between the model compounds could be explained by in silico calculations of the mixing enthalpy for drug and silica in combination with an experimental chromatographic method to estimate molecular interactions.

A structure-based virtual high-throughput screening, molecular docking, molecular dynamics and MM/PBSA study identified novel putative drug-like dual inhibitors of trypanosomal cruzain and rhodesain cysteine proteases

Virtual screening a collection of ~ 25,000 ChemBridge molecule collection identified two nitrogenous heterocyclic molecules, 12 and 15, with potential dual inhibitory properties against trypanosomal cruzain and rhodesain cysteine proteases. Similarity search in DrugBank found the two virtual hits with novel chemical structures with unreported anti-trypanosomal activities. Investigations into the binding mechanism by molecular dynamics simulations for 100 ns revealed the molecules were able to occupy the binding sites and stabilise the protease complexes. Binding affinities calculated using the MM/PBSA method for the last 20 ns showed that the virtual hits have comparable binding affinities to other known inhibitors from literature suggesting both molecules as promising scaffolds with dual cruzain and rhodesain inhibition properties, i.e. 12 has predicted ΔGbind values of - 38.1 and - 38.2 kcal/mol to cruzain and rhodesain, respectively, and 15 has predicted ΔGbind values of - 34.4 and - 25.8 kcal/mol to rhodesain. Per residue binding free energy decomposition studies and visual inspection at 100 ns snapshots revealed hydrogen bonding and non-polar attractions with important amino acid residues that contributed to the ΔGbind values. The interactions are similar to those previously reported in the literature. The overall ADMET predictions for the two molecules were favourable for drug development with acceptable pharmacokinetic profiles and adequate oral bioavailability.

Utilization of Lipophilic Salt and Phospholipid Complex in Lipid-Based Formulations to Modulate Drug Loading and Oral Bioavailability of Pazopanib

Pazopanib hydrochloride (PAZ) displays strong intermolecular interaction in its crystal lattice structure, limiting its solubility and dissolution. The development of lipid-based formulations (LbFs) resulted in reduced PAZ loading due to solid-state mediated low liposolubility. This study aims to enhance our understanding of PAZ crystallinity by synthesizing a lipophilic salt and phospholipid complex and investigating its impact on the drug loading in LbFs. The synthesized pazopanib lipophilic salt and phospholipid complex were extensively characterized. The solid form of pazopanib docusate (PAZ-DOC) and pazopanib phospholipid complex (PAZ-PLC) indicates a reduction in characteristic diffraction peaks of crystalline PAZ. The lipid formulations were prepared using synthesized PAZ-DOC and PAZ-PLC, where PAZ-DOC demonstrated six fold higher drug solubility than the commercial salt form and twice that of the PAZ-PLC due to differences in the crystallinity. Further, the impact of salt and complex formation was assessed on the aqueous drug solubilization using lipolysis and multimedia dissolution experiments. Moreover, the LbFs showed notably faster dissolution compared to the crystalline PAZ and marketed tablet. In terms of in vivo pharmacokinetics, the PAZ-DOC LbF exhibited a remarkable 11-fold increase in AUC value compared to the crystalline PAZ and a 2.5-fold increase compared to Votrient®. Similarly, PAZ-PLC LbF showed an approximately nine fold increase in drug exposure compared to the crystalline PAZ, and a 2.2-fold increase compared to Votrient®. These findings suggest that disrupting the crystallinity of drugs and incorporating them into LbF could be advantageous for enhancing drug loading and overcoming limitations related to drug absorption.

3-styrylcoumarin scaffold-based derivatives as a new approach for leishmaniasis intervention: biological and molecular modeling studies

Seven 3-styrylcoumarins were tested for antileishmanial activity against Leishmania (Viannia) panamensis amastigotes. Cytotoxic activity was also evaluated against mammalian U-937 cells. The 3-methoxy-4-hydroxy coumarin derivative 6 was the most active with an IC50 of 40.5 µM, and did not reveal any conspicuous toxicity toward mammalian U-937 cells. Therefore, it may have potential to be considered as candidate for antileishmanial drug development. Further, among several druggable Leishmania targets, molecular docking studies revealed that compound 6 had docking preference by the N-myristoyltransferase (Lp-NMT) of Leishmania panamensis, showing a higher docking score of - 10.1 kcal mol-1 than positive controls and making this protein as a presumably druggable target for this compound. On the other hand, molecular dynamics simulations affirm the docking hypothesis, showing a conformational stability of the 6/Lp-NMT complex throughout 100 ns simulation. Moreover, the molecular mechanics/Poisson-Boltzmann surface area method also support the docking findings, revealing a total free energy of binding of - 47.26 ± 0.08 kcal mol-1, and identifying through energy decomposition analysis that those key aminoacids are contributing strongly to ligand binding. Finally, an optimal pharmacokinetic profile was also estimated for 6. Altogether, coumarin 6 could be addressed as starting point for further pharmacological studies concerning the therapeutic leishmaniasis intervention.

Graphical abstract

Formulation of a fast-disintegrating drug delivery system from cyclodextrin/naproxen inclusion complex nanofibrous films

Naproxen is a well-known non-steroidal anti-inflammatory drug (NSAID) that suffers from limited water solubility. The inclusion complexation with cyclodextrin (CD) can eliminate this drawback and the free-standing nanofibrous film (NF) generated from these inclusion complexes (ICs) can be a promising alternative formula as an orally disintegrating drug delivery system. For this, naproxen/CD IC NFs were generated using the highly water soluble hydroxypropylated derivative of βCD (HPβCD) with two different molar ratios of 1/1 and 1/2 (drug/CD). The complexation energy calculated by the modeling study demonstrated a more favorable interaction between HPβCD and naproxen for the 1/2 molar ratio than 1/1. HPβCD/naproxen IC NFs were generated with loading concentrations of ∼7-11% and without using toxic chemicals. HPβCD/naproxen IC NFs indicated a faster and enhanced release profile in aqueous medium compared to pure naproxen owing to inclusion complexation. Moreover, rapid disintegration in less than a second was achieved in an artificial saliva environment.

Evaluating physiochemical properties of FDA-approved orally administered drugs

INTRODUCTION

Analyses of orally administered FDA-approved drugs from 1990 to 1993 enabled the identification of a set of physiochemical properties known as Lipinski's Rule of Five (Ro5). The original Ro5 and extended versions still remain the reference criteria for drug development programs. Since many bioactive compounds do not conform to the Ro5, we validated the relevance of and adherence to these rulesets in a contemporary cohort of FDA-approved drugs.

AREAS COVERED

The authors noted that a significant proportion of FDA-approved orally administered parent compounds from 2011 to 2022 deviate from the original Ro5 criteria (~38%) or the Ro5 with extensions (~53%). They then evaluated if a contemporary Ro5 criteria (cRo5) could be devised to better predict oral bioavailability. Furthermore, they discuss many case studies showcasing the need for and benefit of increasing the size of certain compounds and cover several evolving strategies for improving oral bioavailability.

EXPERT OPINION

Despite many revisions to the Ro5, the authors find that no single proposed physiochemical rule has universal concordance with absolute oral bioavailability. Innovations in drug delivery and formulation have dramatically expanded the range of physicochemical properties and the chemical diversity for oral administration.

Potentials of ionic liquids to overcome physical and biological barriers

Over the last decades, ionic liquids (IL) have shown great potential in non-invasive delivery starting from synthetic small molecules to biological large molecules. ILs are emerging as a particular class of drug delivery systems due to their unique physiochemical properties, simple surface modification, and functionalization. These features of IL help achieve specific design principles that are essential for a non-invasive drug delivery system. In this review, we have discussed IL and their applications in non-invasive drug delivery systems. We evaluated state-of-the-art development and advances of IL aiming to mitigate the biological and physical barriers to improve transdermal and oral delivery, summarized in this review. We also provided an overview of the various factors determining the systemic transportation of IL-based formulation. Additionally, we have emphasized how the ILs facilitate the transportation of therapeutic molecules by overcoming biological barriers.

Study of Disordered Mesoporous Silica Regarding Intrinsic Compound Affinity to the Carrier and Drug-Accessible Surface Area

There is increasing research interest in using mesoporous silica for the delivery of poorly water-soluble drugs that are stabilized in a noncrystalline form. Most research has been done on ordered silica, whereas far fewer studies have been published on using nonordered mesoporous silica, and little is known about intrinsic drug affinity to the silica surface. The present mechanistic study uses inverse gas chromatography (IGC) to analyze the surface energies of three different commercially available disordered mesoporous silica grades in the gas phase. Using the more drug-like probe molecule octane instead of nitrogen, the concept of a "drug-accessible surface area" is hereby introduced, and the effect on drug monolayer capacity is addressed. In addition, enthalpic interactions of molecules with the silica surface were calculated based on molecular mechanics, and entropic energy contributions of volatiles were estimated considering molecular flexibility. These free energy contributions were used in a regression model, giving a successful comparison with experimental desorption energies from IGC. It is proposed that a simplified model for drugs based only on the enthalpic interactions can provide an affinity ranking to the silica surface. Following this preformulation research on mesoporous silica, future studies may harness the presented concepts to guide formulation scientists.

Discovery, Synthesis, and Optimization of 1,2,4-Triazolyl Pyridines Targeting Mycobacterium tuberculosis

The rise in multidrug resistant tuberculosis cases underscores the urgent need to develop new treatment strategies for tuberculosis. Herein, we report the discovery and synthesis of a new series of compounds containing a 3-thio-1,2,4-triazole moiety that show inhibition of Mycobacterium tuberculosis (Mtb) growth and survival. Structure-activity relationship studies led us to identify several potent analogs displaying low micromolar to nanomolar inhibitory activity, specifically against Mtb. The potent analogs demonstrated no cytotoxicity in mammalian cells at over 100 times the effective concentration required in Mtb and were bactericidal against Mtb during infection of macrophages. In the exploratory ADME investigations, we observed suboptimal ADME characteristics, which prompted us to identify potential metabolic liabilities for further optimization. Our preliminary investigations into the mechanism of action suggest that this series is not engaging the promiscuous targets that arise from many phenotypic screens. We selected for resistant mutants with the nanomolar potent nitro-containing compound 20 and identified resistant isolates with mutations in genes required for coenzyme F420 biosynthesis and the nitroreductase Ddn. This suggests that the aromatic nitro-1,2,4-triazolyl pyridines are activated by F420-dependent Ddn activity, similar to the nitro-containing TB drug pretomanid. We were able to circumvent the requirement for F420-dependent Ddn activity using compounds that contained non-nitro groups, identifying a key feature to be modified to avoid this predominant resistance mechanism. These studies provide the foundation for the development of a new class of 1,2,4-triazole compounds for the treatment of tuberculosis.

Lipid based formulations as supersaturating oral delivery systems: From current to future industrial applications

Lipid-based formulations, in particular supersaturated lipid-based formulations, are important delivery approaches when formulating challenging compounds, as especially low water-soluble compounds profit from delivery in a pre-dissolved state. In this article, the classification of lipid-based formulation is described, followed by a detailed discussion of different supersaturated lipid-based formulations and the recent advances reported in the literature. The supersaturated lipid-based formulations discussed include both the in situ forming supersaturated systems as well as the thermally induced supersaturated lipid-based formulations. The in situ forming drug supersaturation by lipid-based formulations has been widely employed and numerous clinically available products are on the market. There are some scientific gaps in the field, but in general there is a good understanding of the mechanisms driving the success of these systems. For thermally induced supersaturation, the technology is not yet fully understood and developed, hence more research is required in this field to explore the formulations beyond preclinical studies and initial clinical trials.

Review of industrially recognized polymers and manufacturing processes for amorphous solid dispersion based formulations

Evolving therapeutic landscape through combinatorial chemistry and high throughput screening have resulted in an increased number of poorly soluble drugs. Drug delivery strategies quickly adapted to convert these drugs into successful therapies. Amorphous solid dispersion (ASD) technology is widely employed as a drug delivery strategy by pharmaceutical industries to overcome the challenges associated with these poorly soluble drugs. The development of ASD formulation requires an understanding of polymers and manufacturing techniques. A review of US FDA-approved ASD-based products revealed that only a limited number of polymers and manufacturing technologies are employed by pharmaceutical industries. This review provides a comprehensive guide for the selection and overview of polymers and manufacturing technologies adopted by pharmaceutical industries for ASD formulation. The various employed polymers with their underlying mechanisms for solution-state and solid-state stability are discussed. ASD manufacturing techniques, primarily implemented by pharmaceutical industries for commercialization, are presented in Quality by Design (QbD) format. An overview of novel excipients and progress in manufacturing technologies are also discussed. This review provides insights to the researchers on the industrially accepted polymers and manufacturing technology for ASD formulation that has translated these challenging drugs into successful therapies.

Synthesis, nanostructuring and in silico studies of a new imine bond containing a macroheterocycle as a promising PBP-2a non-β-lactam inhibitor

This study is devoted to the synthesis of a 40-membered macroheterocycle with its further nanostructuring by magnetite nanoparticles. The mentioned macroheterocycle was synthesized by the [2+2] cyclocondensation of the oxygen-containing diamine with an aromatic dialdehyde in a non-catalytic medium and with no work-up procedure. The structure of the obtained macroheterocycle was studied by 1H and 13C nuclear magnetic resonance spectroscopy and matrix-assisted laser desorption/ionization-time of flight mass spectrometry. Furthermore, the nanosupramolecular complex of macroheterocycles with magnetite nanoparticles was obtained and investigated by Fourier-transform infrared and ultraviolet-visible spectroscopy methods. Shifts in the infrared spectra of the nanosupramolecular complex indicate the interaction through metal-aromatic ring non-covalent bonding. The shift is also observed for the C-O-C stretching band of ether bonds. The loading rate of macroheterocycles on magnetite nanoparticles was 18.6%. The morphology of the ensemble was studied by transmission electron microscopy, which confirmed the synthesis of nanospherical particles with a diameter range of 10-20 nm. Powder X-ray diffraction analysis showed patterns of cubic Fe3O4 nanoparticles with a crystallite size equal to 9.1 nm. The macroheterocycle and its nanosupramolecular complex were tested against Klebsiella pneumoniae, Pseudomonas aeruginosa and Staphylococcus aureus. The results have shown that the created complex has shown 64 times better activity against Staphylococcus aureus in comparison with the individual macroheterocycle and 32 times better activity in comparison with the pristine antibiotic Ampicillin as a control. In addition, computational analysis of the macroheterocycle was performed at the B3LYP/6-31G level in water. Molecular docking analyses for the macroheterocycle revealed Penicillin-binding protein PBP2a (5M18) from the transpeptidase family as a target protein in Staphylococcus aureus.

Incorporation of silica nanoparticles into porous templates to fabricate mesoporous silica microspheres for high performance liquid chromatography applications

High-performance liquid chromatography is one of the most important analytical tools for the identification and separation of substances. The efficiency of this method is largely determined by the stationary phase of the columns. Although monodisperse mesoporous silica microspheres (MPSM) represent a commonly used material as stationary phase their tailored preparation remains challenging. Here we report on the synthesis of four MPSMs via the hard template method. Silica nanoparticles (SNPs) which form the silica network of the final MPSMs were generated in situ from tetraethyl orthosilicate (TEOS) in the presence of (3-aminopropyl) triethoxysilane (APTES) functionalized p(GMA-co-EDMA) as hard template. Methanol, ethanol, 2-propanol, and 1-butanol were applied as solvents to control the size of the SNPs in the hybrid beads (HB). After calcination, MPSMs with different sizes, morphology and pore properties were obtained and characterized by scanning electron microscopy, nitrogen adsorption and desorption measurements, thermogravimetric analysis, solid state NMR and DRIFT IR spectroscopy. Interestingly, the 29Si NMR spectra of the HBs show T and Q group species which suggests that there is no covalent linkage between the SNPs and the template. The MPSMs were functionalized with trimethoxy (octadecyl) silane and used as stationary phases in reversed-phase chromatography to separate a mixture of eleven different amino acids. The separation characteristics of the MPSMs strongly depend on their morphology and pore properties which are controlled by the solvent during the preparation of the MPSMs. Overall, the separation behavior of the best phases is comparable with those of commercially available columns. The phases even achieve faster separation of the amino acids without loss of quality.

In vitro-in vivo relationship for amorphous solid dispersions using a double membrane dissolution-permeation setup

The use of amorphous solid dispersions (ASDs) is one commonly applied formulation strategy to improve the oral bioavailability of poorly water-soluble drugs by overcoming dissolution rate and/or solubility limitations. While bioavailability enhancement of ASDs is well documented, it has often been a challenge to establish a predictive model describing in vitro-in vivo relationship (IVIVR). In this study, it is hypothesized that drug absorption might be overestimated by in vitro dissolution-permeation (D/P)-setups, when drug in suspension has the possibility of directly interacting with the permeation barrier. This is supported by the overprediction of drug absorption from neat crystalline efavirenz compared to four ASDs in a D/P-setup based on the parallel artificial membrane permeability assay (PAMPA). However, linear IVIVR (R² = 0.97) is established in a modified D/P-setup in which the addition of a hydrophilic PVDF-filter acts as a physical boundary between the donor compartment and the PAMPA-membrane. Based on microscopic visualization, the improved predictability of the modified D/P-setup is due to the avoidance of direct dissolution of drug particles in the lipid components of the PAMPA-membrane. In general, this principle might aid in providing a more reliable evaluation of formulations of poorly water-soluble drugs before initiating animal models.

Selecting Counterions to Improve Ionized Hydrophilic Drug Encapsulation in Polymeric Nanoparticles

Hydrophobic ion pairing (HIP) can successfully increase the drug loading and control the release kinetics of ionizable hydrophilic drugs, addressing challenges that prevent these molecules from reaching the clinic. Nevertheless, polymeric nanoparticle (PNP) formulation development requires trial-and-error experimentation to meet the target product profile, which is laborious and costly. Herein, we design a preformulation framework (solid-state screening, computational approach, and solubility in PNP-forming emulsion) to understand counterion-drug-polymer interactions and accelerate the PNP formulation development for HIP systems. The HIP interactions between a small hydrophilic molecule, AZD2811, and counterions with different molecular structures were investigated. Cyclic counterions formed amorphous ion pairs with AZD2811; the 0.7 pamoic acid/1.0 AZD2811 complex had the highest glass transition temperature (T_g; 162 °C) and the greatest drug loading (22%) and remained as phase-separated amorphous nanosized domains inside the polymer matrix. Palmitic acid (linear counterion) showed negligible interactions with AZD2811 (crystalline-free drug/counterion forms), leading to a significantly lower drug loading despite having similar log P and pK_a with pamoic acid. Computational calculations illustrated that cyclic counterions interact more strongly with AZD2811 than linear counterions through dispersive interactions (offset π-π interactions). Solubility data indicated that the pamoic acid/AZD2811 complex has a lower organic phase solubility than AZD2811-free base; hence, it may be expected to precipitate more rapidly in the nanodroplets, thus increasing drug loading. Our work provides a generalizable preformulation framework, complementing traditional performance-indicating parameters, to identify optimal counterions rapidly and accelerate the development of hydrophilic drug PNP formulations while achieving high drug loading without laborious trial-and-error experimentation.

The Influence of Blonanserin Supersaturation in Liquid and Silica Stabilised Self-Nanoemulsifying Drug Delivery Systems on In Vitro Solubilisation

Reformulating poorly water-soluble drugs as supersaturated lipid-based formulations achieves higher drug loading and potentially improves solubilisation and bioavailability. However, for the weak base blonanserin, silica solidified supersaturated lipid-based formulations have demonstrated reduced in vitro solubilisation compared to their liquid-state counterparts. Therefore, this study aimed to understand the influence of supersaturated drug load on blonanserin solubilisation from liquid and silica solidified supersaturated self-nanoemulsifying drug delivery systems (super-SNEDDS) during in vitro lipolysis. Stable liquid super-SNEDDS with varying drug loads (90-300% of the equilibrium solubility) were solidified by imbibition into porous silica microparticles (1:1 lipid: silica ratio). In vitro lipolysis revealed greater blonanserin solubilisation from liquid super-SNEDDS compared to solid at equivalent drug saturation levels, owing to strong silica-BLON/lipid interactions, evidenced by a significant decrease in blonanserin solubilisation upon addition of silica to a digesting liquid super-SNEDDS. An increase in solid super-SNEDDS drug loading led to increased solubilisation, owing to the increased drug:silica and drug:lipid ratios. Solidifying SNEDDS with silica enables the fabrication of powdered formulations with higher blonanserin loading and greater stability than liquid super-SNEDDS, however at the expense of drug solubilisation. These competing parameters need careful consideration in designing optimal super-SNEDDS for pre-clinical and clinical application.

Safety, tolerability, pharmacokinetic, and pharmacodynamic characteristics of vutiglabridin: A first-in-class, first-in-human study

This study aimed to evaluate the safety, tolerability, pharmacokinetics, and pharmacodynamics of vutiglabridin, a potential anti-obesity treatment under development, for the first time in humans. A randomized, placebo-controlled, single- and multiple-ascending dose study (SAD and MAD, respectively) was performed in healthy Koreans and Whites. Subjects randomly received a single oral dose of 30-720 mg vutiglabridin or placebo at a ratio of 8:2 in the SAD study or 240-480 mg vutiglabridin or placebo once daily for 14 days in the MAD study. Food effect was also evaluated in 240 mg single dose group. Pharmacokinetics were evaluated through plasma concentrations, and pharmacodynamic biomarkers related to obesity or inflammation were analyzed. Safety and tolerability were assessed throughout the study. Single and multiple doses of vutiglabridin were generally well-tolerated. The pharmacokinetic parameters show less than dose-proportionality increase, and plasma concentrations increased more than two-fold after multiple administrations. The mean half-life of Koreans and Whites in the MAD study was 110 and 73 h, respectively. The systemic exposure of vutiglabridin was significantly increased when taken with a high-fat meal, and the systemic exposure was lower in Whites than in Koreans. Vutiglabridin was well-tolerated in healthy Koreans and Whites. The plasma concentration increased less than the dose-proportionality manner. These results justify further investigation of vutiglabridin in patients with obesity.

Recent Advances in Amorphous Solid Dispersions: Preformulation, Formulation Strategies, Technological Advancements and Characterization

Amorphous solid dispersions (ASDs) are among the most popular and widely studied solubility enhancement techniques. Since their inception in the early 1960s, the formulation development of ASDs has undergone tremendous progress. For instance, the method of preparing ASDs evolved from solvent-based approaches to solvent-free methods such as hot melt extrusion and Kinetisol^®. The formulation approaches have advanced from employing a single polymeric carrier to multiple carriers with plasticizers to improve the stability and performance of ASDs. Major excipient manufacturers recognized the potential of ASDs and began introducing specialty excipients ideal for formulating ASDs. In addition to traditional techniques such as differential scanning calorimeter (DSC) and X-ray crystallography, recent innovations such as nano-tomography, transmission electron microscopy (TEM), atomic force microscopy (AFM), and X-ray microscopy support a better understanding of the microstructure of ASDs. The purpose of this review is to highlight the recent advancements in the field of ASDs with respect to formulation approaches, methods of preparation, and advanced characterization techniques.

Self-Emulsifying Formulations to Increase the Oral Bioavailability of 4,6,4′-Trimethylangelicin as a Possible Treatment for Cystic Fibrosis

4,6,4′-trimethylangelicin (TMA) is a promising pharmacological option for the treatment of cystic fibrosis (CF) due to its triple-acting behavior toward the function of the CF transmembrane conductance regulator. It is a poorly water-soluble drug, and thus it is a candidate for developing a self-emulsifying formulation (SEDDS). This study aimed to develop a SEDDS to improve the oral bioavailability of TMA. Excipients were selected on the basis of solubility studies. Polyoxyl-35 castor oil (Cremophor® EL) was proposed as surfactant, diethylene glycol-monoethyl ether (Transcutol® HP) as cosolvent, and a mixture of long-chainmono-,di-, and triglycerides (Maisine® CC) or medium-chain triglycerides (LabrafacTM lipophile) as oil phases. Different mixtures were prepared and characterized by measuring the emulsification time, drop size, and polydispersity index to identify the most promising formulation. Two formulations containing 50% surfactant (w/w), 40% cosolvent (w/w), and 10% oil (w/w) (Maisine® CC or LabrafacTM lipophile) were selected. The results showed that both formulations were able to self-emulsify, producing nanoemulsions with a drop size range of 20–25 nm, and in vivo pharmacokinetic studies demonstrated that they were able to significantly increase the oral bioavailability of TMA. In conclusion, SEEDS are useful tools to ameliorate the pharmacokinetic profile of TMA and could represent a strategy to improve the therapeutic management of CF.

Predicting Bile and Lipid Interaction for Drug Substances

Predicting biopharmaceutical characteristics and food effects for drug substances may substantially leverage rational formulation outcomes. We established a bile and lipid interaction prediction model for new drug substances and further explored the model for the prediction of bile-related food effects. One hundred and forty-one drugs were categorized as bile and/or lipid interacting and noninteracting drugs using ¹H nuclear magnetic resonance (NMR) spectroscopy. Quantitative structure-property relationship modeling with molecular descriptors was applied to predict a drug's interaction with bile and/or lipids. Bile interaction, for example, was indicated by two descriptors characterizing polarity and lipophilicity with a high balanced accuracy of 0.8. Furthermore, the predicted bile interaction correlated with a positive food effect. Reliable prediction of drug substance interaction with lipids required four molecular descriptors with a balanced accuracy of 0.7. These described a drug's shape, lipophilicity, aromaticity, and hydrogen bond acceptor capability. In conclusion, reliable models might be found through drug libraries characterized for bile interaction by NMR. Furthermore, there is potential for predicting bile-related positive food effects.

Design and Development of a New Glucagon-Like Peptide-1 Receptor Agonist to Obtain High Oral Bioavailability

PURPOSE

Semaglutide is the only oral GLP-1 RA in the market, but oral bioavailability is generally limited in range of 0.4-1%. In this study, a new GLP-1RA named SHR-2042 was developed to gain higher oral bioavailability than semaglutide.

METHOD

Self-association of SHR-2042, semaglutide and liraglutide were assessed using SEC-MALS. The intestinal perfusion test in SD rats was used to select permeation enhancers (PEs) including SNAC, C10 and LCC. ITC, CD and DLS were used to explore the interaction between SHR-2042 and SNAC. Gastric administrated test in SD rats was used to screen SHR-2042 granules with different SHR-2042/SNAC ratios. The oral bioavailability of SHR-2042 was studied in rats and monkeys.

RESULT

The designed GLP-1RA, SHR-2042, gives a better solubility and lipophilicity than semaglutide. While it forms a similar oligomer with that of semaglutide. During the selection of PEs, SNAC shows better exposure than the other competing PEs including C10 and LCC. SHR-2042 and SNAC bind quickly and exhibit hydrophobic interaction. SNAC could promote monomerization of SHR-2042 and form micelles to trap the monomerized SHR-2042. The oral bioavailability of SHR-2042 paired with SNAC is 0.041% (1:0, w/w), 0.083% (1:10, w/w), 0.32% (1:30, w/w) and 2.83% (1:60, w/w) in rats. And the oral bioavailability of SHR-2042 matched with SNAC is 3.39% (1:30, w/w) in monkeys, which is over 10 times higher than that of semaglutide.

CONCLUSION

We believe that the design and development of oral SHR-2042 will provide a new way to design more and more GLP-1RAs with high oral bioavailability in the future.

Development of New Strategies for Malaria Chemoprophylaxis: From Monoclonal Antibodies to Long-Acting Injectable Drugs

Drug discovery for malaria has traditionally focused on orally available drugs that kill the abundant, parasitic blood stage. Recently, there has also been an interest in injectable medicines, in the form of monoclonal antibodies (mAbs) with long-lasting plasma half-lives or long-lasting depot formulations of small molecules. These could act as prophylactic drugs, targeting the sporozoites and other earlier parasitic stages in the liver, when the parasites are less numerous, or as another intervention strategy targeting the formation of infectious gametocytes. Generally speaking, the development of mAbs is less risky (costly) than small-molecule drugs, and they have an excellent safety profile with few or no off-target effects. Therefore, populations who are the most vulnerable to malaria, i.e., pregnant women and young children would have access to such new treatments much faster than is presently the case for new antimalarials. An analysis of mAbs that were successfully developed for oncology illustrates some of the feasibility aspects, and their potential as affordable drugs in low- and middle-income countries.

Microgels and Nanogels for the Delivery of Poorly Water-Soluble Drugs

While microgels and nanogels are most commonly used for the delivery of hydrophilic therapeutics, the water-swollen structure, size, deformability, colloidal stability, functionality, and physicochemical tunability of microgels can also offer benefits for addressing many of the barriers of conventional vehicles for the delivery of hydrophobic therapeutics. In this review, we describe approaches for designing microgels with the potential to load and subsequently deliver hydrophobic drugs by creating compartmentalized microgels (e.g., core-shell structures), introducing hydrophobic domains in microgels, leveraging host-guest interactions, and/or applying "smart" environmentally responsive materials with switchable hydrophobicity. In particular, the challenge of promoting hydrophobic drug loading without compromising the inherent advantages of microgels as delivery vehicles and ensuring practically relevant release kinetics from such structures is highlighted, with an eye toward the practical translation of such vehicles to the clinic.

Facile synthesis of 5-Isopropyl-2,3-dimethylbenzene-1,4-diol by Friedel-Crafts and Determination of Partition Coefficient in n- Octanol/Water

The wide therapeutic effect of quinone-based drugs has received considerable interest for a long time. In this research, Friedel-Crafts performed a facile synthesis of quinone derivatives using the mixture of Brønsted acid. Reflux of 2,3-dimethylhydroquinone (1), isopropanol, glacial acetic acid, and H2SO4 for 15 minutes gave yellow oil product of 5-isopropyl-2,3-dimethylbenzene-1,4-diol (2) as a major product. Characterization using Nuclear Magnetic Resonance (NMR) revealed the methine proton splitting for isopropyl at δ 3.13 ppm, which has a cross-coupling with aromatic carbon at δ 119.6 ppm suggested the substitution of a proton on quinone ring with isopropyl group. Analysis Fourier Transform Infra-Red (FT-IR) showed the broad spectrum of –OH, the vibration of CH sp3, and isopropyl groups. The minor products identified as 5-isopropyl-2,3-dimethylcyclohexa-2,5-diene-1,4-dione (3), 5-isopropyl-2,3-dimethyl-1,4 phenylene diacetate (4), and 2,3-dimethylbenzene-5,6-isopropyl-1,4-diol (5) confirmed from 2D HETCOR and MS analysis. The partition coefficient (log P) of compound 2 showed a higher solubility by 1.9-fold compared to hydroquinone 1. It is suggested that an additional methyl group increased the partition into the organic phase.

Naturally occurring anthraquinones as potential inhibitors of SARS-CoV-2 main protease: an integrated computational study

The novel coronavirus disease (COVID-19) has spread throughout the globe, affecting millions of people. The World Health Organization (WHO) has declared this infectious disease a pandemic. At present, several clinical trials are going on to identify possible drugs for treating this infection. SARS-CoV-2 M^pro is one of the most critical drug targets for the blockage of viral replication. The aim of this study was to identify potential natural anthraquinones that could bind to the active site of SARS-CoV-2 main protease and stop the viral replication. Blind molecular docking studies of 13 anthraquinones and one control drug (Boceprevir) with SARS-CoV-2 M^pro were carried out using the SwissDOCK server, and alterporriol-Q that showed the highest binding affinity towards M^pro were subjected to molecular dynamics simulation studies. This study indicated that several antiviral anthraquinones could prove to be effective inhibitors for SARS-CoV-2 M^pro of COVID-19 as they bind near the active site having the catalytic dyad, HIS41 and CYS145 through non-covalent forces. The anthraquinones showed less inhibitory potential as compared to the FDA-approved drug, boceprevir. Among the anthraquinones studied, alterporriol-Q was found to be the most potent inhibitor of SARS-CoV-2 M^pro. Further, MD simulation studies for M^pro- alterporriol-Q system suggested that alterporriol-Q does not alter the structure of M^pro to a significant extent. Considering the impact of COVID-19, identification of alternate compounds like alterporriol-Q that could inhibit the viral infection will help in accelerating the process of drug discovery.

Insights into the Release Mechanisms of ITZ:HPMCAS Amorphous Solid Dispersions: The Role of Drug-Rich Colloids

Understanding the dissolution mechanisms of amorphous solid dispersions (ASDs) and being able to link enhanced drug exposure with process parameters are key when formulating poorly soluble compounds. Thus, in this study, ASDs composed by itraconazole (ITZ) and hydroxypropylmethylcellulose acetate succinate (HPMCAS) were formulated with different polymer grades and drug loads (DLs) and processed by spray drying with different atomization ratios and outlet temperatures. Their in vitro performance and the ability to form drug-rich colloids were then evaluated by a physiologically relevant dissolution method. In gastric media, drug release followed a diffusion-controlled mechanism and drug-rich colloids were not formed since the solubility of the amorphous API at pH 1.6 was not exceeded. After changing to intestinal media, the API followed a polymer dissolution-controlled release, where the polymer rapidly dissolved, promoting the immediate release of API and thus leading to liquid-liquid phase separation (LLPS) and consequent formation of drug-rich colloids. However, the release of API and polymer was not congruent, so API surface enrichment occurred, which limited the further dissolution of the polymer, leading to a drug-controlled release. ASDs formulated with M-grade showed the highest ability to maintain supersaturation and the lowest tendency for AAPS due to its good balance between acetyl and succinoyl groups, and thus strong interactions with both the hydrophobic drug and the aqueous dissolution medium. The ability to form colloids increased for low DL (15%) and high specific surface area due to the high amount of polymer released until the occurrence of API surface enrichment. Even though congruent release was not observed, all ASDs formed drug-rich colloids that were stable in the solution until the end of the dissolution study (4 h), maintaining the same size distribution (ca. 300 nm). Drug-rich colloids can, in vivo, act as a drug reservoir replenishing the drug while it permeates. Designing ASDs that are prone to form colloids can overcome the solubility constraints of Biopharmaceutics Classification System (BCS) II and IV drugs, posing as a reliable formulation strategy.

Best practices in current models mimicking drug permeability in the gastrointestinal tract - an UNGAP review

The absorption of orally administered drug products is a complex, dynamic process, dependent on a range of biopharmaceutical properties; notably the aqueous solubility of a molecule, stability within the gastrointestinal tract (GIT) and permeability. From a regulatory perspective, the concept of high intestinal permeability is intrinsically linked to the fraction of the oral dose absorbed. The relationship between permeability and the extent of absorption means that experimental models of permeability have regularly been used as a surrogate measure to estimate the fraction absorbed. Accurate assessment of a molecule's intestinal permeability is of critical importance during the pharmaceutical development process of oral drug products, and the current review provides a critique of in vivo, in vitro and ex vivo approaches. The usefulness of in silico models to predict drug permeability is also discussed and an overview of solvent systems used in permeability assessments is provided. Studies of drug absorption in humans are an indirect indicator of intestinal permeability, but in vitro and ex vivo tools provide initial screening approaches are important tools for direct assessment of permeability in drug development. Continued refinement of the accuracy of in silico approaches and their validation with human in vivo data will facilitate more efficient characterisation of permeability earlier in the drug development process and will provide useful inputs for integrated, end-to-end absorption modelling.

Novel thiophene Chalcones-Coumarin as acetylcholinesterase inhibitors: Design, synthesis, biological evaluation, molecular docking, ADMET prediction and molecular dynamics simulation

A series of around eight novel chalcone based coumarin derivatives (23a-h) was designed, subjected to in-silico ADMET prediction, synthesized, characterized by IR, NMR, Mass analytical techniques and evaluated as acetylcholinesterase (AChE) inhibitor for the treatment of Alzheimer's disease (AD). The results of predicted ADMET study demonstrated the drug-likeness properties of the titled compounds with developmental challenges in lipophilicity and solubility parameters. The in vitro assessment of the synthesized compounds revealed that all of them showed significant activity (IC₅₀ ranging from 0.42 to 1.296 µM) towards AChE compared to the standard drug, galantamine (IC₅₀ = 1.142 ± 0.027 µM). Among these, compound 23e displayed the most potent inhibitory activity with IC₅₀ value of 0.42 ± 0.019 µM. Cytotoxicity of all compounds was tested on normal human hepatic (THLE-2) cell lines at three different concentrations using the MTT assay, in which none of the compound showed significant toxicity at the highest concentration of 1000 µg/ml compared to the control group. Based on the docking study against AChE, the most active derivative 23e was orientated towards the active site and occupied both catalytic anionic site (CAS) and peripheral anionic site (PAS) of the target enzyme. In-silico studies revealed tested showed better inhibition activity of AChE compared to Butyrylcholinesterase (BuChE). Molecular dynamics simulation explored the stability and dynamic behavior of 23e- AChE complex.

Natural Peptides Inducing Cancer Cell Death: Mechanisms and Properties of Specific Candidates for Cancer Therapeutics

Nowadays, cancer has become the second highest leading cause of death, and it is expected to continue to affect the population in forthcoming years. Additionally, treatment options will become less accessible to the public as cases continue to grow and disease mechanisms expand. Hence, specific candidates with confirmed anticancer effects are required to develop new drugs. Among the novel therapeutic options, proteins are considered a relevant source, given that they have bioactive peptides encrypted within their sequences. These bioactive peptides, which are molecules consisting of 2–50 amino acids, have specific activities when administered, producing anticancer effects. Current databases report the effects of peptides. However, uncertainty is found when their molecular mechanisms are investigated. Furthermore, analyses addressing their interaction networks or their directly implicated mechanisms are needed to elucidate their effects on cancer cells entirely. Therefore, relevant peptides considered as candidates for cancer therapeutics with specific sequences and known anticancer mechanisms were accurately reviewed. Likewise, those features which turn certain peptides into candidates and the mechanisms by which peptides mediate tumor cell death were highlighted. This information will make robust the knowledge of these candidate peptides with recognized mechanisms and enhance their non-toxic capacity in relation to healthy cells and further avoid cell resistance.

Natural Peptides Inducing Cancer Cell Death: Mechanisms and Properties of Specific Candidates for Cancer Therapeutics

Nowadays, cancer has become the second highest leading cause of death, and it is expected to continue to affect the population in forthcoming years. Additionally, treatment options will become less accessible to the public as cases continue to grow and disease mechanisms expand. Hence, specific candidates with confirmed anticancer effects are required to develop new drugs. Among the novel therapeutic options, proteins are considered a relevant source, given that they have bioactive peptides encrypted within their sequences. These bioactive peptides, which are molecules consisting of 2–50 amino acids, have specific activities when administered, producing anticancer effects. Current databases report the effects of peptides. However, uncertainty is found when their molecular mechanisms are investigated. Furthermore, analyses addressing their interaction networks or their directly implicated mechanisms are needed to elucidate their effects on cancer cells entirely. Therefore, relevant peptides considered as candidates for cancer therapeutics with specific sequences and known anticancer mechanisms were accurately reviewed. Likewise, those features which turn certain peptides into candidates and the mechanisms by which peptides mediate tumor cell death were highlighted. This information will make robust the knowledge of these candidate peptides with recognized mechanisms and enhance their non-toxic capacity in relation to healthy cells and further avoid cell resistance.

Anisotropic and Amphiphilic Mesoporous Core-Shell Silica Microparticles Provide Chemically Selective Environments for Simultaneous Delivery of Curcumin and Quercetin

Porous silica materials are often used for drug delivery. However, systems for simultaneous delivery of multiple drugs are scarce. Here we show that anisotropic and amphiphilic dumbbell core-shell silica microparticles with chemically selective environments can entrap and release two drugs simultaneously. The dumbbells consist of a large dense lobe and a smaller hollow hemisphere. Electron microscopy images show that the shells of both parts have mesoporous channels. In a simple etching process, the properly adjusted stirring speed and the application of ammonium fluoride as etching agent determine the shape and the surface anisotropy of the particles. The surface of the dense lobe and the small hemisphere differ in their zeta potentials consistent with differences in dye and drug entrapment. Confocal Raman microscopy and spectroscopy show that the two polyphenols curcumin (Cur) and quercetin (QT) accumulate in different compartments of the particles. The overall drug entrapment efficiency of Cur plus QT is high for the amphiphilic particles but differs widely between Cur and QT compared to controls of core-shell silica microspheres and uniformly charged dumbbell microparticles. Furthermore, Cur and QT loaded microparticles show different cancer cell inhibitory activities. The highest activity is detected for the dual drug loaded amphiphilic microparticles in comparison to the controls. In the long term, amphiphilic particles may open up new strategies for drug delivery.

Evaluation of selected carotenoids of Lycopersicon esculentum variants as therapeutic targets for 'Alzheimer's disease: an in silico approach

The seriousness and menace of the worldwide weight of 'Alzheimer's disease have been related to a few factors, which incorporate antioxidant system depletion, mutation of proteins, and high expression of cholinesterases due to aging, environmental influence, diet, infectious agents, and hormonal imbalance. Overexpression of cholinesterases has been emphatically connected to 'Alzheimer's disease because of the unreasonable hydrolysis of acetylcholine and butyrylcholine. Certain plant phytochemicals, for example, beta-carotenoids, lutein, neoxanthin, and viola-xanthine from Lycopersicon esculentum Mill. Var. esculentum (ESC) and Lycopersicon esculentum Mill. Var. cerasiforme (CER) has been utilized altogether as a therapeutic candidate for the treatment of 'Alzheimer's disease. Therefore, this research sought to investigate the drug-likeness of the individual carotenoids as detailed for cholinesterase inhibition in the treatment of 'Alzheimer's disease. Four potential cholinesterase inhibitors from ESC and CER were retrieved from the PubChem database. Investigation of their drug-likeness, toxicity prediction, molecular docking, and dynamic simulations were carried out using Molinspiration, PreADMET V.2.0, Patchdock server, and Schrodinger Maestro software respectively. Neoxanthin was ranked the safest with a greater tendency to inhibit the cholinesterases with high binding affinity. In addition, its stability after simulation in a mimicked biological environment suggests its relevance as a potential drug candidate for the treatment of 'Alzheimer's disease through the inhibition of cholinesterases.

Comprehensive strategies of machine-learning-based quantitative structure-activity relationship models

Early quantitative structure-activity relationship (QSAR) technologies have unsatisfactory versatility and accuracy in fields such as drug discovery because they are based on traditional machine learning and interpretive expert features. The development of Big Data and deep learning technologies significantly improve the processing of unstructured data and unleash the great potential of QSAR. Here we discuss the integration of wet experiments (which provide experimental data and reliable verification), molecular dynamics simulation (which provides mechanistic interpretation at the atomic/molecular levels), and machine learning (including deep learning) techniques to improve QSAR models. We first review the history of traditional QSAR and point out its problems. We then propose a better QSAR model characterized by a new iterative framework to integrate machine learning with disparate data input. Finally, we discuss the application of QSAR and machine learning to many practical research fields, including drug development and clinical trials.

Lipophilic Salts and Lipid-Based Formulations for Bridging the Food Effect Gap of Venetoclax

Lipid based formulations (LBF) have shown to overcome food dependent bioavailability for some poorly water-soluble drugs. However, the utility of LBFs can be limited by low dose loading due to a low drug solubility in LBF vehicles. This study investigated the solubility and drug loading increases in LBFs using lipophilic counterions to form lipophilic salts of venetoclax. Venetoclax docusate was formed from venetoclax free base and verified by ¹H NMR. Formation of stable venetoclax-fatty acid associations with either oleic acid or decanoic acid were attempted, however, the molecular associations were less consistent based on ¹H NMR. Venetoclax docusate displayed a up to 6.2-fold higher solubility in self-emulsifying drug delivery systems (SEDDS) when compared to the venetoclax free base solubility resulting in a higher dose loading. A subsequent bioavailability study in landrace pigs demonstrated a 2.5-fold higher bioavailability for the lipophilic salt containing long chain SEDDS compared to the commercially available solid dispersion Venclyxto® in the fasted state. The bioavailability of all lipophilic salt SEDDS in the fasted state was similar to Venclyxto® in the fed state. This study confirmed that lipophilic drug salts increase the dose loading in LBFs and showed that lipophilic salt-SEDDS combinations may be able to overcome bioavailability limitations of drugs with low inherent dose loading in lipid vehicles. Furthermore, the present study demonstrated the utility of a LBF approach, in combination with lipophilic salts, to overcome food dependent variable oral bioavailability of drugs.

Lipid Based Formulations in Hard Gelatin and HPMC Capsules: a Physical Compatibility Study

PURPOSE

To investigate the compatibility between hard gelatin and HPMC capsules with a range of different isotropic lipid based formulations containing multiple excipients.

METHODS

The miscibility was investigated for 350 systems applying five different oils (Labrafac ™ lipophile WL1349, Maisine® CC, Captex 300 EP/NF, olive oil, and Capmul MCM EP/NF), five different surfactans (Labrasol ® ALF, Labrafil M 2125 CS, Kolliphor ® ELP, Kolliphor ® HS 15, Tween 80) and three different cosolvents (propylene glycol, polyethylene glycol 400, and Transcutol ® HP). For the isotropic systems capsule compatibility was investigated in both gelatin and HPMC capsules at 25°C at 40% and 60% relative humidity by examining physical damages to the capsules and weight changes after storage.

RESULTS

The miscibility of lipid based vehicles was best when the formulation contained monoglycerides and surfactants with a hydrophilic-lipophilic balance value <12. Gelatin capsules in general resulted in a better compatibility when compared to HPMC capsules for the evaluated formulations. Addition of water to the formulation improved the capsule compatibility for both capsule types. The expected capsule mass change could partly be predicted in binary systems using the provided data of the single excipients weighted for its formulation proportion.

CONCLUSIONS

The capsule compatibility was driven by the components incorporated into the formulations, where more was compatible with gelatin than HPMC capsules. Prediction of the mass change from individual excipient contributions can provide a good first estimate if a vehicle is compatible with a capsule, however, this needs to be proved experimentally.

Lipid-Polymeric Films: Composition, Production and Applications in Wound Healing and Skin Repair

The use of lipids in the composition of polymeric-based films for topical administration of bioactive ingredients is a recent research topic; while few products are commercially available, films containing lipids represent a strategic area for the development of new products. Some lipids are usually used in polymeric-based film formulations due to their plasticizing action, with a view to improving the mechanical properties of these films. On the other hand, many lipids have healing, antimicrobial, anti-inflammatory, anti-aging properties, among others, that make them even more interesting for application in the medical-pharmaceutical field. This manuscript discusses the production methods of these films both on a laboratory and at industrial scales, the properties of the developed biopolymers, and their advantages for the development of dermatologic and cosmetic products.

Mechanisms of drug solubilization by polar lipids in biorelevant media

Despite the widespread use of lipid excipients in both academic research and oral formulation development, rational selection guidelines are still missing. In the current study, we aimed to establish a link between the molecular structure of commonly used polar lipids and drug solubilization in biorelevant media. The solubilization of fenofibrate by 13 phospholipids, 11 fatty acids and 2 monoglycerides was studied by an in vitro model of the upper GI tract. The main trends were verified with progesterone and danazol. It was revealed that to alter drug solubilization in biorelevant media, the polar lipids must form mixed colloidal aggregates with the bile. Such aggregates are formed when: (1) the polar lipid is used at a sufficiently high concentration (relative to its mixed critical micellar concentration) and (2) its hydrophobic chain has a melting temperature (T_m) < 37 °C. When these two conditions are met, the increased polar lipid chain length increases the drug solubilization capacity. Hence, long chain (C18) unsaturated polar lipids show best drug solubilization, due to the combination of long chain length and low T_m. Polar lipids with T_m significantly higher than 37 °C (e.g. C16 and C18 saturated compounds) do not impact drug solubilization in biorelevant media, due to limited association in mixed colloidal aggregates. The hydrophilic head group also has a dramatic impact on the drug solubilization enhancement, with polar lipids performance decreasing in the order [choline phospholipids] > [monoglycerides] > [fatty acids]. As both the acyl chain and head group types are structural features of the polar lipids, and not of the solubilized drugs, the described trends in drug solubilization should hold true for a variety of hydrophobic molecules.

Rational Selection of Bio-Enabling Oral Drug Formulations - A PEARRL Commentary

New drug candidates often require bio-enabling formation technologies such as lipid-based formulations, solid dispersions, or nanosized drug formulations. Development of such more sophisticated delivery systems generally requires higher resource investment compared to a conventional oral dosage form, which might slow down clinical development. To achieve the biopharmaceutical objectives while enabling rapid cost effective development, it is imperative to identify a suitable formulation technique for a given drug candidate as early as possible. Hence many companies have developed internal decision trees based mostly on prior organizational experience, though they also contain some arbitrary elements. As part of the EU funded PEARRL project, a number of new decision trees are here proposed that reflect both the current scientific state of the art and a consensus among the industrial project partners. This commentary presents and discusses these, while also going beyond this classical expert approach with a pilot study using emerging machine learning, where the computer suggests formulation strategy based on the physicochemical and biopharmaceutical properties of a molecule. Current limitations are discussed and an outlook is provided for likely future developments in this emerging field of pharmaceutics.

Predicting the API partitioning between lipid-based drug delivery systems and water

Partitioning tests in water are early-stage standard experiments during the development of pharmaceutical formulations, e.g. of lipid-based drug delivery system (LBDDS). The partitioning behavior of the active pharmaceutical ingredient (API) between the fatty phase and the aqueous phase is a key property, which is supposed to be determined by those tests. In this work, we investigated the API partitioning between LBDDS and water by in-silico predictions applying the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) and validated these predictions experimentally. The API partitioning was investigated for LBDDS comprising up to four components (cinnarizine or ibuprofen with tricaprylin, caprylic acid, and ethanol). The influence of LBDDS/water mixing ratios from 1/1 up to 1/200 (w/w) as well as the influence of excipients on the API partitioning was studied. Moreover, possible API crystallization upon mixing the LBDDS with water was predicted. This work showed that PC-SAFT is a strong tool for predicting the API partitioning behavior during in-vitro tests. Thus, it allows rapidly assessing whether or not a specific LBDDS might be a promising candidate for further in-vitro tests and identifying the API load up to which API crystallization can be avoided.