Mechanical contribution of secondary phloem to postural control in trees: the bark side of the force

Unveiling the mechanisms of Moso bamboo's motor function and internal growth stress

Bamboo, a renewable resource with rapid growth and an impressive height-to-diameter ratio, faces mechanical instability due to its slender structure. Despite this, bamboo maintains its posture without breaking in its battle against environmental and gravitational forces. But what drives this motor function in bamboo? This study subjected Moso bamboo (Phyllostachys edulis) to gravitational stimulation, compelling it to grow at a 45° angle instead of upright. Remarkably, the artificially inclined bamboo exhibited astonishing shape control and adjustment capabilities. The growth strain was detected at both macroscopic and microscopic levels, providing evidence for the presence of internal stress, namely growth stress. The high longitudinal tensile stress on the upper side, along with a significant asymmetry in stress distribution in tilted bamboo, plays a pivotal role in maintaining its mechanical stability. Drawing upon experimental findings, it can be deduced that the growth stress primarily originates from the broad layers of fiber cells. Bamboo could potentially regulate the magnitude of growth stress by modifying the number of fiber cell layers during its maturation process. Additionally, the microfibril angle and lignin disposition may decisively influence the generation of growth stress.

Digital image correlation techniques for motion analysis and biomechanical characterization of plants

Temporally and spatially complex 3D deformation processes appear in plants in a variety of ways and are difficult to quantify in detail by classical cinematographic methods. Furthermore, many biomechanical test methods, e.g. regarding compression or tension, result in quasi-2D deformations of the tested structure, which are very time-consuming to analyze manually regarding strain fields. In materials testing, the contact-free optical 2D- or 3D-digital image correlation method (2D/3D-DIC) is common practice for similar tasks, but is still rather seldom used in the fundamental biological sciences. The present review aims to highlight the possibilities of 2D/3D-DIC for the plant sciences. The equipment, software, and preparative prerequisites are introduced in detail and advantages and disadvantages are discussed. In addition to the analysis of wood and trees, where DIC has been used since the 1990s, this is demonstrated by numerous recent approaches in the contexts of parasite-host attachment, cactus joint biomechanics, fruit peel impact resistance, and slow as well as fast movement phenomena in cones and traps of carnivorous plants. Despite some technical and preparative efforts, DIC is a very powerful tool for full-field 2D/3D displacement and strain analyses of plant structures, which is suitable for numerous in-depth research questions in the fields of plant biomechanics and morphogenesis.

Structure of cellulose in birch phloem fibres in tension wood: an X-ray nanodiffraction study

BACKGROUND

To gain a better understanding of bark layer structure and function, especially of the phloem fibres and their contribution to the posture control of trees, it is important to map the structural properties of these cells. The role of bark can also be linked to the reaction wood formation and properties which are essential when it comes to studying the questions related to tree growth. To offer new insights into the role of bark in the postural control of trees, we studied the micro- and nanoscale structures of the phloem and its nearest layers. This study is the first time, in which phloem fibres in trees have been extensively examined using X-ray diffraction (XRD). We determined the orientation of cellulose microfibrils in phloem fibres of Silver birch saplings by using scanning synchrotron nanodiffraction. The samples consisted of phloem fibres extracted from tension, opposite and normal wood (TW, OW, NW).

RESULTS

Using scanning XRD, we were able to obtain new information about the mean microfibril angle (MFA) in cellulose microfibrils in phloem fibres connected to reaction wood. A slight but consistent difference was detected in the average MFA values of phloem fibres between the TW and OW sides of the stem. Using scanning XRD, different contrast agents (intensity of the main cellulose reflection or calcium oxalate reflection, mean MFA value) were used to produce 2D images with 200 nm spatial resolution.

CONCLUSIONS

Based on our results, the tension wood formation in the stem might be related to the structure and properties of phloem fibres. Thus, our results suggest that the nanostructure of phloem fibres is involved in the postural control of trees containing tension and opposite wood.

Structural Characteristics of Reaction Tissue in Plants

To maintain or adjust posture under the challenges of gravity and increased self-weight, or the effects of light, snow, and slope, plants have the ability to develop a special type of tissue called reaction tissue. The formation of reaction tissue is a result of plant evolution and adaptation. The identification and study of plant reaction tissue are of great significance for understanding the systematics and evolution of plants, the processing and utilization of plant-based materials, and the exploration of new biomimetic materials and biological templates. Trees' reaction tissues have been studied for many years, and recently, many new findings regarding these tissues have been reported. However, reaction tissue requires further detailed exploration, particularly due to their complex and diverse nature. Moreover, the reaction tissues in gymnosperms, vines, herbs, etc., which display unique biomechanical behavior, have also garnered the attention of research. After summarizing the existing literature, this paper provides an outline of the reaction tissues in woody plants and non-woody plants, and lays emphasis on alternations in the cell wall structure of the xylem in softwood and hardwood. The purpose of this paper is to provide a reference for the further exploration and study of reaction tissues with great diversity.

Straightening the crooked: intraspecific divergence of stem posture control and associated trade-offs in a model conifer

Although the straightening capacity of the stem is key for light capture and mechanical stability in forest trees, little is known about its adaptive implications. Assuming that stem straightening is costly, trade-offs are expected with competing processes such as growth, maintenance, and defence. We established a manipulative experiment in a common garden of Pinus pinaster including provenances typically showing either straight-stemmed or crooked-stemmed phenotypes. We imposed a bending up to 35º on plants aged 9 years of both provenance groups and followed the straightening kinetics and shoot elongation after releasing. Eight months later, we destructively assessed biomass partitioning, reaction wood, wood microdensity, xylem reserve carbohydrates, and phloem secondary metabolites. The experimental bending and release caused significant, complex changes with a marked difference between straight- and crooked-type plants. The straight-type recovered verticality faster and to a higher degree and developed more compression wood, while displaying a transitory delay in shoot elongation, reducing resource allocation to defence and maintaining the levels of non-structural carbohydrates compared with the crooked type. This combination of responses indicates the existence of intraspecific divergence in the reaction to mechanical stresses that may be related to different adaptive phenotypic plasticity.

Wood density relates negatively to maximum plant height across major angiosperm and gymnosperm orders

PREMISE

Wood density is a crucial plant functional trait related to plant life history strategies. Its ecological importance in small-stature growth forms (e.g., shrubs) has not been extensively examined. Given that hydraulic conduit dimensions vary positively with plant height and that there is a negative relationship between conduits' diameter and wood density, I hypothesized an also negative relationship between wood density and plant height. Knowing that bark and pith proportions are significant in small-diameter stems, I additionally disentangled the contribution of wood, bark, and pith to stem density.

METHODS

I determined density in small-diameter stems across 153 species spanning all major angiosperm and gymnosperm orders by considering a diversity of growth forms (trees, treelets, shrubs, vines, and hemiparasites). Stem cross sections were dissected to consider the densities of wood with bark and pith; wood with pith and without bark; wood with bark and no pith; and wood without bark and pith. Secondary growth was also measured.

RESULTS

Trees showed similar wood densities as non-self-supporting vines, and both showed significantly less dense wood than treelets, shrubs, and hemiparasites. General comparisons showed that wood was significantly denser than all other tissues, and these differences did not depend on growth form. Wood density was significantly and negatively related to growth rate and pith area proportions but not to bark thickness proportion.

CONCLUSIONS

An implicit negative relationship between maximum plant height and stem density emerges as a property of plants likely linked to hydraulic conductive size.

Anatomies, vascular architectures, and mechanics underlying the leaf size-stem size spectrum in 42 Neotropical tree species

The leaf size-stem size spectrum is one of the main dimensions of plant ecological strategies. Yet the anatomical, mechanical, and hydraulic implications of small versus large shoots are still poorly understood. We investigated 42 tropical rainforest tree species in French Guiana, with a wide range of leaf areas at the shoot level. We quantified the scaling of hydraulic and mechanical constraints with shoot size, estimated as the water potential difference (ΔΨ) and the bending angle (ΔΦ), respectively. We investigated how anatomical tissue area, flexural stiffness and xylem vascular architecture affect such scaling by deviating (or not) from theoretical isometry with shoot size variation. Vessel diameter and conductive path length were found to be allometrically related to shoot size, thereby explaining the independence between ΔΨ and shoot size. Leaf mass per area, stem length, and the modulus of elasticity were allometrically related to shoot size, explaining the independence between ΔΦ and shoot size. Our study also shows that the maintenance of both water supply and mechanical stability across the shoot size range are not in conflict.

Influence of structural reinforcements on the twist-to-bend ratio of plant axes: a case study on Carex pendula

During biological evolution, plants have developed a wide variety of body plans and concepts that enable them to adapt to changing environmental conditions. The trade-off between flexural and torsional rigidity is an important example of sometimes conflicting mechanical requirements, the adaptation to which can be quantified by the dimensionless twist-to-bend ratio. Our study considers the triangular flower stalk of Carex pendula, which shows the highest twist-to-bend ratios ever measured for herbaceous plant axes. For an in-depth understanding of this peak value, we have developed geometric models reflecting the 2D setting of triangular cross-sections comprised of a parenchymatous matrix with vascular bundles surrounded by an epidermis. We analysed the mathematical models (using finite elements) to measure the effect of either reinforcements of the epidermal tissue or fibre reinforcements such as collenchyma and sclerenchyma on the twist-to-bend ratio. The change from an epidermis to a covering tissue of corky periderm increases both the flexural and the torsional rigidity and decreases the twist-to-bend ratio. Furthermore, additional individual fibre reinforcement strands located in the periphery of the cross-section and embedded in a parenchymatous ground tissue lead to a strong increase of the flexural and a weaker increase of the torsional rigidity and thus resulted in a marked increase of the twist-to-bend ratio. Within the developed model, a reinforcement by 49 sclerenchyma fibre strands or 24 collenchyma fibre strands is optimal in order to achieve high twist-to-bend ratios. Dependent on the mechanical quality of the fibres, the twist-to-bend ratio of collenchyma-reinforced axes is noticeably smaller, with collenchyma having an elastic modulus that is approximately 20 times smaller than that of sclerenchyma. Based on our mathematical models, we can thus draw conclusions regarding the influence of mechanical requirements on the development of plant axis geometry, in particular the placement of reinforcements.

Between Stress and Response: Function and Localization of Mechanosensitive Ca2+ Channels in Herbaceous and Perennial Plants

Over the past three decades, how plants sense and respond to mechanical stress has become a flourishing field of research. The pivotal role of mechanosensing in organogenesis and acclimation was demonstrated in various plants, and links are emerging between gene regulatory networks and physical forces exerted on tissues. However, how plant cells convert physical signals into chemical signals remains unclear. Numerous studies have focused on the role played by mechanosensitive (MS) calcium ion channels MCA, Piezo and OSCA. To complement these data, we combined data mining and visualization approaches to compare the tissue-specific expression of these genes, taking advantage of recent single-cell RNA-sequencing data obtained in the root apex and the stem of Arabidopsis and the Populus stem. These analyses raise questions about the relationships between the localization of MS channels and the localization of stress and responses. Such tissue-specific expression studies could help to elucidate the functions of MS channels. Finally, we stress the need for a better understanding of such mechanisms in trees, which are facing mechanical challenges of much higher magnitudes and over much longer time scales than herbaceous plants, and we mention practical applications of plant responsiveness to mechanical stress in agriculture and forestry.

Quantifying carbon in tree bark: The importance of bark morphology and tree size

Bark contributes approximately 20% to the total above-ground biomass of trees, yet bark is not properly accounted for when estimating carbon sequestered by trees. Current allometric functions estimate tree volume from diameter measured over the bark, and derive bark density and carbon content from estimates for wood. As the bark density of hardwood species is 40%-50% lower than the wood density, but nearly equivalent in conifers, bark carbon is overestimated for most species. The latter is further exacerbated by variation in bark volume with bark surface morphology.Fissured bark volume is overestimated by diameter over bark measurements by up to 40%. The vacant space in fissures can be accounted for by a bark fissure index (BFI). We calculate bark carbon for Australian species from a non-destructive and effective BFI using bark thickness measured in the field.Bark volume, and in turn bark carbon, scaled inversely with tree size (diameter) so that bark volume comprised 42% of small trees (10 cm diameter at breast height, DBH) but 23% of large trees (50 cm DBH). Our BFI method using a bark thickness gauge (BGM) yielded similar results than using the less time-efficient contour gauge method (CM) to estimate BFI (bias BGM-CM -1.3%, non-significant at p = 0.72). Both BGM and CM had an error of <4% compared to digitized BFI from destructive sampled stem disks. An average of 15 bark gauge measurements per tree estimated bark thickness (and inconsequence BFI) for both fissured and unfissured bark with <20% error relative to the exact value.Using the bark gauge method, BFI can be rapidly measured from large numbers of trees needed for estimating bark carbon at the community level and modelling carbon uptake, storage and cycling in woody biomes.

Form, Structure, and Function: How Plants vs. Animals Solve Physical Problems

Plants and animals have evolved solutions for a wide range of mechanical problems, such as adhesion and dispersal. Several of these solutions have been sources for bio-inspiration, like the Lotus Effect for self-cleaning surfaces or Velcro for adhesion. This symposium brought together plant and animal biomechanics researchers who tackle similar problems in different systems under the unifying theme of structure-function relations with relevance to bio-inspiration. For both communities it holds true that the structural systems, which have evolved in the respective organisms to address the mechanical challenges mentioned above, are often highly complex. This requires interdisciplinary research involving "classical" experimental biology approaches in combination with advanced imaging methods and computational modeling. The transfer of such systems into biomimetic technical materials and structures comes with even more challenges, like scalability issues and applicability. Having brought all these topics under one umbrella, this symposium presented the forefront of biophysical basic and application-oriented international research with the goal of facilitation knowledge transfer across systems and disciplines.

How does bark contribution to postural control change during tree ontogeny? A study of six Amazonian tree species

Recent works revealed that bark is able to produce mechanical stress to control the orientation of young tilted stems. Here we report how the potential performance of this function changes with stem size in six Amazonian species with contrasted bark anatomy. The potential performance of the mechanism depends both on the magnitude of bark stress and the relative thickness of the bark. We measured bark longitudinal residual strain and density, and the allometric relationship between bark thickness and stem radius over a gradient of tree sizes. Constant tensile stress was found in species that rely on bark for the control of stem orientation in young stages. Other species had increasing compressive stress, associated with increasing density attributed to the development of sclereids. Compressive stress was also associated with low relative bark thickness. The relative thickness of bark decreased with size in all species, suggesting that a reorientation mechanism based on bark progressively performs less well as the tree grows. However, greater relative thickness was observed in species with more tensile stress, thereby evidencing that this reduction in performance is mitigated in species that rely on bark for reorientation.

Mechanical Ecology-Taking Biomechanics to the Field

Synopsis Interdisciplinary research can have strong and surprising synergistic effects, leading to rapid knowledge gains. Equally important, it can help to reintegrate fragmented fields across increasingly isolated specialist sub-disciplines. However, the lack of a common identifier for research "in between fields" can make it difficult to find relevant research outputs and network effectively. We illustrate and address this issue for the emerging interdisciplinary hotspot of "mechanical ecology," which we define here as the intersection of quantitative biomechanics and field ecology at the organism level. We show that an integrative approach crucially advances our understanding in both disciplines by (1) putting biomechanical mechanisms into a biologically meaningful ecological context and (2) addressing the largely neglected influence of mechanical factors in organismal and behavioral ecology. We call for the foundation of knowledge exchange platforms such as meeting symposia, special issues in journals, and focus groups dedicated to mechanical ecology.

Bark in Woody Plants: Understanding the Diversity of a Multifunctional Structure

Most biological structures carry out multiple functions. Focusing on only one function to make adaptive inferences overlooks that manifold selection pressures and tradeoffs shape the characteristics of a multifunctional structure. Focusing on single functions can only lead to a partial picture of the causes underlying diversity and the evolutionary origin of the structure in question. I illustrate this discussion using bark as a study case. Bark comprises all the tissues surrounding the xylem in woody plants. Broadly, bark includes an inner and mostly living region and an outer, dead one. Of all plant structures, bark has the most complex anatomical structure and ontogenetic origin involving two (and often three) different meristems. Traditionally, the wide diversity in bark traits, mainly bark thickness, has been interpreted as the result of the selective pressures imposed by fire regime. However, recent research has shown that explanations based on fire regime cannot account for salient patterns of bark variation globally including the very strong inner bark thickness-stem diameter scaling, which is likely due to metabolic needs, and the very high intracommunity variation in total, inner, and outer bark thickness, and in inner:outer proportions. Moreover, explanations based on fire disregard that in addition to fire protection, bark carries out several other crucial functions for plants including translocation of photosynthates; storage of starch, soluble sugars, water, and other compounds; protection from herbivores, pathogens, and high temperatures; wound closure, as well as mechanical support, photosynthesis, and likely being involved in xylem embolism repair. All these functions are crucial for plant performance and are involved in synergistic (e.g., storage of water and insulation) and trade-off relationships (e.g., protection from fire vs photosynthetic activity). Focusing on only one of these functions, protection from fire has provided an incomplete picture of the selective forces shaping bark diversity and has severely hindered our incipient understanding of the functional ecology of this crucial region of woody stems. Applying a multifunctional perspective to the study of bark will allow us to address why we observe such high intracommunity variation in bark traits, why some bark trait combinations are ontogenetically impossible or penalized by selection, how bark is coordinated functionally with other plant parts, and as a result, to understand how bark contributes to the vast diversity of plant ecological strategies across the globe.

Structural features in tension wood and distribution of wall polymers in the G-layer of in vitro grown poplars

Under the effect of disturbances, like unbalanced stem, but also during normal development, poplar trees can develop a specific secondary xylem, called "tension wood" (TW), which is easily identifiable by the presence of a gelatinous layer in the secondary cell walls (SCW) of the xylem fibers. Since TW formation was mainly performed on 2-year-old poplar models, an in vitro poplar that produces gelatinous fibers (G-fibers) while offering the same experimental advantages as herbaceous plants has been developed. Using specific cell wall staining techniques, wood structural features and lignin/cellulose distribution were both detailed in cross-sections obtained from the curved stem part of in vitro poplars. A supposed delay in the SCW lignification process in the G-fibers, along with the presence of a G-layer, could be observed in the juvenile plants. Moreover, in this G-layer, the immunolabeling of various polymers carried out in the SCW of TW has allowed detecting crystalline cellulose, arabinogalactans proteins, and rhamnogalacturonans I; however, homogalacturonans, xylans, and xyloglucans could not be found. Interestingly, extensins were detected in this typical adaptative or stress-induced structure. These observations were corroborated by a quantitation of the immunorecognized polymer distribution using gold particle labeling. In conclusion, the in vitro poplar model seems highly convenient for TW studies focusing on the implementation of wall polymers that provide the cell wall with greater plasticity in adapting to the environment.

Posture control in land plants: growth, position sensing, proprioception, balance, and elasticity

The colonization of the atmosphere by land plants was a major evolutionary step. The mechanisms that allow for vertical growth through air and the establishment and control of a stable erect habit are just starting to be understood. A key mechanism was found to be continuous posture control to counterbalance the mechanical and developmental challenges of maintaining a growing upright structure. An interdisciplinary systems biology approach was invaluable in understanding the underlying principles and in designing pertinent experiments. Since this discovery previously held views of gravitropic perception had to be reexamined and this has led to the description of proprioception in plants. In this review, we take a purposefully pedagogical approach to present the dynamics involved from the cellular to whole-plant level. We show how the textbook model of how plants sense gravitational force has been replaced by a model of position sensing, a clinometer mechanism that involves both passive avalanches and active motion of statoliths, granular starch-filled plastids, in statocytes. Moreover, there is a transmission of information between statocytes and other specialized cells that sense the degree of organ curvature and reset asymmetric growth to straighten and realign the structure. We give an overview of how plants have used the interplay of active posture control and elastic sagging to generate a whole range of spatial displays during their life cycles. Finally, a position-integrating mechanism has been discovered that prevents directional plant growth from being disrupted by wind-induced oscillations.

Mechanical properties and structure-function trade-offs in secondary xylem of young roots and stems

Bending and torsional properties of young roots and stems were measured in nine woody angiosperms. The variation in mechanical parameters was correlated to wood anatomical traits and analysed with respect to the other two competing functions of xylem (namely storage and hydraulics). Compared with stems, roots exhibited five times greater flexibility in bending and two times greater flexibility in torsion. Lower values of structural bending and structural torsional moduli (Estr and Gstr, respectively) of roots compared with stems were associated with the presence of thicker bark and a greater size of xylem cells. Across species, Estr and Gstr were correlated with wood density, which was mainly driven by the wall thickness to lumen area ratio of fibres. Higher fractions of parenchyma did not translate directly into a lower wood density and reduced mechanical stiffness in spite of parenchyma cells having thinner, and in some cases less lignified, cell walls than fibres. The presence of wide, partially non-lignified rays contributed to low values of Estr and Gstr in Clematis vitalba. Overall, our results demonstrate that higher demands for mechanical stability in self-supporting stems put a major constraint on xylem structure, whereas root xylem can be designed with a greater emphasis on both storage and hydraulic functions.