Experimental models for guided bone regeneration in healthy and medically compromised conditions

Composite barrier membrane for bone regeneration: advancing biomaterial strategies in defect repair

Bone defects represent a significant challenge in clinical practice, driving the need for innovative solutions that effectively support bone regeneration. Barrier membranes, due to playing a critical role in creating an environment conducive to bone regeneration by preventing the infiltration of non-osteogenic tissues, are widely applied to bone repair. However, inadequate spatial stability and osteogenesis-promoting ability often limit current barrier membranes. In response to these challenges, we have developed an advanced gelatin methacrylate/hydroxyapatite/hydroxyapatite membrane (GelMA/HAp/HAM) composite biomaterial designed as a barrier membrane with superior spatial stability and optimal degradation properties. The GelMA/HAp/HAM composite features a bilayer structure, with each layer possessing distinct properties: the dense hydroxyapatite membrane (HAM) acts as a barrier to prevent connective tissue infiltration. In contrast, the porous gelatin methacrylate/hydroxyapatite (GelMA/HAp) hydrogel layer promotes osteogenesis. Studies have demonstrated the composite's excellent biocompatibility and its significant osteogenic differentiation enhancement. This composite membrane holds great promise for clinical applications in bone defect repair, providing a new avenue for improving patient outcomes in regenerative medicine.

Strategies for Improving Impaired Osseointegration in Compromised Animal Models

Implant osseointegration is reduced in patients with systemic conditions that compromise bone quality, such as osteoporosis, disuse syndrome, and type 2 diabetes. Studies using rodent models designed to mimic these compromised conditions demonstrated reduced bone-to-implant contact (BIC) or a decline in bone mineral density. These adverse effects are a consequence of disrupted intercellular communication. A variety of approaches have been developed to compensate for the altered microenvironment inherent in compromised conditions, including the use of biologics and implant surface modification. Chemical and physical modification of surface properties at the microscale, mesoscale, and nanoscale levels to closely resemble the surface topography of osteoclast resorption pits found in bone has proven to be a highly effective strategy for improving implant osseointegration. The addition of hydrophilicity to the surface further enhances osteoblast response at the bone-implant interface. These surface modifications, applied either alone or in combination, improve osseointegration by increasing proliferation and osteoblastic differentiation of osteoprogenitor cells and enhancing angiogenesis while modulating osteoclast activity to achieve net new bone formation, although the specific effects vary with surface treatment. In addition to direct effects on surface-attached cells, the communication between bone marrow stromal cells and immunomodulatory cells is sensitive to these surface properties. This article reports on the advances in titanium surface modifications, alone and in combination with novel therapeutics in animal models of human disease affecting bone quality. It offers clinically translatable perspectives for clinicians to consider when using different surface modification strategies to improve long-term implant performance in compromised patients. This review supports the use of surface modifications, bioactive coatings, and localized therapeutics as pragmatic approaches to improve BIC and enhance osteogenic activity from both structural and molecular standpoints.

Bone reconstruction of extensive maxillomandibular defects in adults

Reconstruction of significant maxillomandibular defects is a challenge that has been much discussed over the last few decades. Fundamental principles were developed decades ago (bone bed viability, graft immobilization). Clinical decision-making criteria are highly relevant, including local/systemic factors and incision designs, the choice of material, grafting technique, and donor site morbidity. Stabilizing particulated grafts for defined defects-that is, via meshes or shells-might allow significant horizontal and vertical augmentation; the alternatives are onlay and inlay techniques. More significant defects might require extra orally harvested autologous bone blocks. The anterior iliac crest is often used for nonvascularized augmentation, whereas more extensive defects often require microvascular reconstruction. In those cases, the free fibula flap has become the standard of care. The development of alternatives is still ongoing (i.e., alloplastic reconstruction, zygomatic implants, obturators, distraction osteogenesis). Especially for these complex procedures, three-dimensional planning tools enable facilitated planning and a surgical workflow.

Bone regeneration in implant dentistry: Which are the factors affecting the clinical outcome?

The key factors that are needed for bone regeneration to take place include cells (osteoprogenitor and immune-inflammatory cells), a scaffold (blood clot) that facilitates the deposition of the bone matrix, signaling molecules, blood supply, and mechanical stability. However, even when these principles are met, the overall amount of regenerated bone, its stability over time and the incidence of complications may significantly vary. This manuscript provides a critical review on the main local and systemic factors that may have an impact on bone regeneration, trying to focus, whenever possible, on bone regeneration simultaneous to implant placement to treat bone dehiscence/fenestration defects or for bone contouring. In the future, it is likely that bone tissue engineering will change our approach to bone regeneration in implant dentistry by replacing the current biomaterials with osteoinductive scaffolds combined with cells and mechanical/soluble factors and by employing immunomodulatory materials that can both modulate the immune response and control other bone regeneration processes such as osteogenesis, osteoclastogenesis, or inflammation. However, there are currently important knowledge gaps on the biology of osseous formation and on the factors that can influence it that require further investigation. It is recommended that future studies should combine traditional clinical and radiographic assessments with non-invasive imaging and with patient-reported outcome measures. We also envisage that the integration of multi-omics approaches will help uncover the mechanisms responsible for the variability in regenerative outcomes observed in clinical practice.

Use of 3D-printed polylactic acid/bioceramic composite scaffolds for bone tissue engineering in preclinical in vivo studies: A systematic review

3D-printed composite scaffolds have emerged as an alternative to deal with existing limitations when facing bone reconstruction. The aim of the study was to systematically review the feasibility of using PLA/bioceramic composite scaffolds manufactured by 3D-printing technologies as bone grafting materials in preclinical in vivo studies. Electronic databases were searched using specific search terms, and thirteen manuscripts were selected after screening. The synthesis of the scaffolds was carried out using mainly extrusion-based techniques. Likewise, hydroxyapatite was the most used bioceramic for synthesizing composites with a PLA matrix. Among the selected studies, seven were conducted in rats and six in rabbits, but the high variability that exists regarding the experimental process made it difficult to compare them. Regarding the results, PLA/Bioceramic composite scaffolds have shown to be biocompatible and mechanically resistant. Preclinical studies elucidated the ability of the scaffolds to be used as bone grafts, allowing bone growing without adverse reactions. In conclusion, PLA/Bioceramics scaffolds have been demonstrated to be a promising alternative for treating bone defects. Nevertheless, more care should be taken when designing and performing in vivo trials, since the lack of standardization of the processes, which prevents the comparison of the results and reduces the quality of the information. STATEMENT OF SIGNIFICANCE: 3D-printed polylactic acid/bioceramic composite scaffolds have emerged as an alternative to deal with existing limitations when facing bone reconstruction. Since preclinical in vivo studies with animal models represent a mandatory step for clinical translation, the present manuscript analyzed and discussed not only those aspects related to the selection of the bioceramic material, the synthesis of the implants and their characterization. But provides a new approach to understand how the design and perform of clinical trials, as well as the selection of the analysis methods, may affect the obtained results, by covering authors' knowledgebase from veterinary medicine to biomaterial science. Thus, this study aims to systematically review the feasibility of using polylactic acid/bioceramic scaffolds as grafting materials in preclinical trials.

Influence of Scaffold Microarchitecture on Angiogenesis and Regulation of Cell Differentiation during the Early Phase of Bone Healing: A Transcriptomics and Histological Analysis

The early phase of bone healing is a complex and poorly understood process. With additive manufacturing, we can generate a specific and customizable library of bone substitutes to explore this phase. In this study, we produced tricalcium phosphate-based scaffolds with microarchitectures composed of filaments of 0.50 mm in diameter, named Fil050G, and 1.25 mm named Fil125G, respectively. The implants were removed after only 10 days in vivo followed by RNA sequencing (RNAseq) and histological analysis. RNAseq results revealed upregulation of adaptive immune response, regulation of cell adhesion, and cell migration-related genes in both of our two constructs. However, significant overexpression of genes linked to angiogenesis, regulation of cell differentiation, ossification, and bone development was observed solely in Fil050G scaffolds. Moreover, quantitative immunohistochemistry of structures positive for laminin revealed a significantly higher number of blood vessels in Fil050G samples. Furthermore, µCT detected a higher amount of mineralized tissue in Fil050G samples suggesting a superior osteoconductive potential. Hence, different filament diameters and distances in bone substitutes significantly influence angiogenesis and regulation of cell differentiation involved in the early phase of bone regeneration, which precedes osteoconductivity and bony bridging seen in later phases and as consequence, impacts the overall clinical outcome.

Functionalizing Collagen Membranes with MSC-Conditioned Media Promotes Guided Bone Regeneration in Rat Calvarial Defects

Functionalizing biomaterials with conditioned media (CM) from mesenchymal stromal cells (MSC) is a promising strategy for enhancing the outcomes of guided bone regeneration (GBR). This study aimed to evaluate the bone regenerative potential of collagen membranes (MEM) functionalized with CM from human bone marrow MSC (MEM-CM) in critical size rat calvarial defects. MEM-CM prepared via soaking (CM-SOAK) or soaking followed by lyophilization (CM-LYO) were applied to critical size rat calvarial defects. Control treatments included native MEM, MEM with rat MSC (CEL) and no treatment. New bone formation was analyzed via micro-CT (2 and 4 weeks) and histology (4 weeks). Greater radiographic new bone formation occurred at 2 weeks in the CM-LYO group vs. all other groups. After 4 weeks, only the CM-LYO group was superior to the untreated control group, whereas the CM-SOAK, CEL and native MEM groups were similar. Histologically, the regenerated tissues showed a combination of regular new bone and hybrid new bone, which formed within the membrane compartment and was characterized by the incorporation of mineralized MEM fibers. Areas of new bone formation and MEM mineralization were greatest in the CM-LYO group. Proteomic analysis of lyophilized CM revealed the enrichment of several proteins and biological processes related to bone formation. In summary, lyophilized MEM-CM enhanced new bone formation in rat calvarial defects, thus representing a novel 'off-the-shelf' strategy for GBR.

The use of periodontal membranes in the field of periodontology: spotlight on collagen membranes

Periodontal regenerative techniques are performed to accomplish the restitution of soft and hard teeth-supporting tissues that have been lost due to trauma or inflammatory disease. Periodontal membranes are used for these techniques to provide support and a framework for cell growth and tissue regeneration. They act as a temporary and selective barrier to cell proliferation. Easy clinical handling, biomechanical specifications, high biocompatibility, cell-occlusivity, and satisfactory bioresorption rate are essential properties a membrane needs to be effective. The creation and maintenance of a secluded space is also a fundamental rule in periodontal regenerative techniques. The use of barrier membranes in the field of restorative dentistry has progressed toward the use of minimally invasive approaches optimizing wound closure and limiting patient morbidity. This review intends to provide an overview of the major cellular events in the surgical wound and membrane surface. It was also performed to assess, from literature data, the pertinence of using non-resorbable and resorbable membranes for this regenerative purpose. Special attention will be given to collagen membranes.

The effect of experimental diabetes and membrane occlusiveness on guided bone regeneration: A proof of principle study

OBJECTIVES

To evaluate the effect of membrane occlusiveness and experimental diabetes on early and late healing following guided bone regeneration.

MATERIAL AND METHODS

A total of 30 Wistar rats were randomly allocated to three groups: healthy (H), uncontrolled diabetic (UD) and controlled diabetic (CD). A critical size calvarial defect (CSD) was created at the mid-portion of one parietal bone, and it was treated with a double layer of e-PTFE membrane presenting 0.5 mm perforations. The animals were killed at 7 and 30 days of healing, and qualitative and quantitative histological evaluations were performed. Data were compared with the ones previously obtained from other 30 animals (10H, 10UD, 10 CD), where two CSDs were randomly treated with a double-layer e-PTFE occlusive membrane or left empty.

RESULTS

Following application of cell occlusive or cell permeable membranes, significant regeneration can be observed. However, at 30 days in the H group occlusive compared to cell permeable membranes promoted enhanced bone regeneration (83.9 ± 7.3% vs. 52.5 ± 8.6%), while no significant differences were observed within the CD and UD groups. UD led to reduced regeneration compared to H when an occlusive barrier was applied, whereas comparable outcomes to H and CD were observed when placing perforated membranes.

CONCLUSION

The application of cell permeable membranes may have masked the potentially adverse effect of experimental UD on bone regeneration.

CLINICAL RELEVANCE

Membrane porosity might contribute to modulate the bone regenerative response in UD conditions. Future studies are needed to establish the degree of porosity associated with the best regenerative outcomes as well as the underlying molecular mechanisms.

Decoronation-induced infected alveolar socket defect rat model for ridge preservation

Current rat alveolar ridge preservation models have not been well standardized. In this study, we proposed decoronation-induced infected alveolar socket model of rat. The bilateral maxillary first molars (M1) of twenty-four rats were decoronized or extracted. After 2, 6, 10, and 14 weeks, bone and soft tissue changes at M1 and periodontal conditions of maxillary second (M2) and third molars (M3) were evaluated by micro-computed tomography and histological analysis. Additional eighteen rats with standardized size defects were grafted with Bio-Oss Collagen to compare with unmanipulated contralateral side. Decoronation preserved greater bone and soft tissue dimensions at M1, provided larger three-dimensional (3D) bone contour volume, but also promoted periodontal breakdown of M2 Histological results showed intense inflammatory cell infiltrations and severe bone resorption within M1 socket and at mesial aspect of M2. The critical dimensions to accommodate largest standardized defect at M1 were 2.2-2.3 mm at vertical bone height and 2.8-3.2 mm at alveolar crestal width. Bio-Oss Collagen could not fully preserve buccal or palatal bone height but could be beneficial in preserving ridge width in large alveolar defects. Collectively, if periodontally-involved alveolar bone defect is preferred, we suggest extracting M1 roots 6 weeks after decoronation to allow periodontitis to occur at M2. If standardized critical dimension defect is preferred, we suggest extracting M1 roots 2 weeks after decoronation, and creating defect in the middle of M1 site with size no larger than 2.7 mm diameter to its full depth.

Alveolar Ridge Preservation with Guided Bone Regeneration or Socket Seal Technique. A Randomised, Single-Blind Controlled Clinical Trial

Objectives

To compare radiographic bone changes, following alveolar ridge preservation (ARP) using Guided Bone Regeneration (GBR), a Socket Seal (SS) technique or unassisted socket healing (Control).

Material and methods

Patients requiring a single rooted tooth extraction in the anterior maxilla, were randomly allocated into: GBR, SS and Control groups (n= 14/). Cone Beam Computed Tomography (CBCT) images were recorded post‐extraction and at 4 months, the mid‐buccal and mid‐palatal alveolar ridge heights (BARH/PARH) were measured. The alveolar ridge width, cross‐sectional socket and alveolar‐process area changes, implant placement feasibility, requirement for bone augmentation and post‐surgical complications were also recorded.

Results

BARH and PARH was found to increase with the SS (0.65 mm ± 1.1/0.65 mm ± 1.42) techniques, stabilise with GBR (0.07 mm ± 0.83/0.86 mm ±1.37) and decrease in the Control (−0.52 mm ± 0.8/−0.43 mm ± 0.83). Statistically significance was found when comparing the GBR and SS BARH (p = .04/.005) and GBR PARH (p = .02) against the Control. GBR recorded the smallest reduction in alveolar ridge width (−2.17 mm ± 0.84), when compared to the Control (−2.3 mm ± 1.11) (p = .89). A mid‐socket cross‐sectional area reduction of 4% (−2.27 mm² ± 11.89), 1% (−0.88 mm² ± 15.48) and 13% (−6.93 mm² ± 8.22) was found with GBR, SS and Control groups (GBR vs. Control p = .01). The equivalent alveolar process area reduction was 8% (−7.36 mm² ± 10.45), 6% (−7 mm² ± 18.97) and 11% (−11.32 mm² ± 10.92). All groups supported implant placement, with bone dehiscence noted in 57% (n = 4), 64%(n = 7) and 85%(n = 12) of GBR, SS and Control cases (GBR vs. Control p = .03). GBR had a higher risk of swelling and mucosal colour change, with SS associated with graft sequestration and matrix breakdown.

Conclusion

GBR ARP was found to be more effective at reducing radiographic bone dimensional changes following tooth extraction.

A long-lasting guided bone regeneration membrane from sequentially functionalised photoactive atelocollagen

The fast degradation of collagen-based membranes in the biological environment remains a critical challenge, resulting in underperforming Guided Bone Regeneration (GBR) therapy leading to compromised clinical results. Photoactive atelocollagen (AC) systems functionalised with ethylenically unsaturated monomers, such as 4-vinylbenzyl chloride (4VBC), have been shown to generate mechanically competent materials for wound healing, inflammation control and drug delivery, whereby control of the molecular architecture of the AC network is key. Building on this platform, the sequential functionalisation with 4VBC and methacrylic anhydride (MA) was hypothesised to generate UV-cured AC hydrogels with reduced swelling ratio, increased proteolytic stability and barrier functionality for GBR therapy. The sequentially functionalised atelocollagen precursor (SAP) was characterised via TNBS and ninhydrin colourimetric assays, circular dichroism and UV-curing rheometry, which confirmed nearly complete consumption of collagen's primary amino groups, preserved triple helices and fast (< 180 s) gelation kinetics, respectively. Hydrogel's swelling ratio and compression modulus were adjusted depending on the aqueous environment used for UV-curing, whilst the sequential functionalisation of AC successfully generated hydrogels with superior proteolytic stability in vitro compared to both 4VBC-functionalised control and the commercial dental membrane Bio-Gide®. These in vitro results were confirmed in vivo via both subcutaneous implantation and a proof-of-concept study in a GBR calvarial model, indicating integrity of the hydrogel and barrier defect, as well as tissue formation following 1-month implantation in rats. STATEMENT OF SIGNIFICANCE: Collagen-based membranes remain a key component in Guided Bone Regeneration (GBR) therapy, but their properties, e.g. proteolytic stability and soft tissue barrier functionality, are still far from optimal. This is largely attributed to the complex molecular configuration of collagen, which makes chemical accessibility and structure-function relations challenging. Here, we fabricated a UV-cured hydrogel network of atelocollagen, whereby triple helices were sequentially functionalised with two distinct ethylenically unsaturated monomers. The effects of the sequential functionalisation and UV-curing on the macroscopic properties, degradation behaviour and GBR capability were investigated in vitro and in vivo. The results highlight the key role of the sequential functionalisation and provide important insights for the design of future, longer-lasting resorbable membranes for GBR therapy.

Complications in bone-grafting procedures: Classification and management

Bone-regenerative interventions aiming to restore deficient alveolar ridges, such as the use of block grafts or through the application of guided bone-regeneration principles, have reported positive outcomes in the published scientific literature. These interventions, however, are invasive, and hence, intraoperative and/or postoperative complications may occur. The types of complications and their severity may vary from the exposure of the biomaterial (membrane or graft) to postsurgical infections, neurosensorial disturbances, occurrence of hemorrhage, and pain, etc. The aim of the present narrative review was to search the available scientific evidence concerning the incidence of these complications, their effect on treatment outcomes, their clinical management and, finally, strategies aimed at prevention. Exposure of the barrier membrane or the block graft is the most common complication associated with oral regenerative interventions. To manage these complications, depending on the extent of the exposure and the presence or absence of concomitant infections, therapeutic measures may vary, from the topical application of antiseptics to the removal of the barrier membrane or the block graft. Regardless of their treatment, the occurrence of these complications has been associated with patient selection, with compliant patients (eg, nonsmokers) having a lower reported incidence of complications. Similarly, surgical factors such as correct flap elevation and a tensionless closure are of obvious importance. Finally, to prevent the incidence of complications, it appears prudent to utilize whenever possible less invasive surgical interventions.

Hard tissue stability after guided bone regeneration: a comparison between digital titanium mesh and resorbable membrane

Guided bone regeneration (GBR) uses resorbable and non-resorbable membranes as biological barriers. This study compared the differences in hard tissue stability between GBR using evidence-based digital titanium mesh and resorbable collagen membranes during implant placement. A total of 40 patients (65 implant sites) were enrolled and divided into two groups: resorbable membrane and digital titanium mesh groups. The alveolar bone was analyzed at two- and three-dimensional levels using cone-beam computed tomography and by reconstructing and superimposing the hard tissues at four time points: preoperatively, postoperatively, before second-stage surgery, and 1 year after loading. The use of digital titanium mesh showed less alveolar bone resorption in vertical and horizontal directions two-dimensionally before the second-stage surgery and 1 year after loading. Regarding volumetric stability, the percentage of resorption after 6 months of healing with resorbable membrane coverage reached 37.5%. However, it was only 23.4% with titanium mesh. Although postoperative bone volume was greater at all labial sites with resorbable membrane than with digital titanium mesh, after substantial bone resorption within 1 year of loading, the labial bone thickness at the upper part of implants was thinner with resorbable membrane than with digital titanium mesh. Furthermore, digital titanium meshes made according to ideal bone arch contour reduced soft tissue irritation, and the exposure rate was only 10%. Therefore, although both resorbable membrane and digital titanium mesh in GBR were able to successfully reconstruct the bone defect, digital titanium meshes were better at maintaining the hard tissue volume in the osteogenic space.

Animal models of vertical bone augmentation (Review)

Vertical bone augmentation is an important challenge in dental implantology. Existing vertical bone augmentation techniques, along with bone grafting materials, have achieved certain clinical progress but continue to have numerous limitations. In order to evaluate the possibility of using biomaterials to develop bone substitutes, medical devices and/or new bone grafting techniques for vertical bone augmentation, it is essential to establish clinically relevant animal models to investigate their biocompatibility, mechanical properties, applicability and safety. The present review discusses recent animal experiments related to vertical bone augmentation. In addition, surgical protocols for establishing relevant preclinical models with various animal species were reviewed. The present study aims to provide guidance for selecting experimental animal models of vertical bone augmentation.

The Effect of Controlled Diabetes and Hyperglycemia on Implant Placement with Simultaneous Horizontal Guided Bone Regeneration: A Clinical Retrospective Analysis

Diabetes represents a challenge in implant therapy because hyperglycemia may negatively affect bone regeneration, directly compromising clinical outcomes and increasing clinical failures. The aim of this retrospective study is to analyse the prognostic significance of HbA1c levels in patients undergoing implant placement associated with horizontal guided bone regeneration. Thirty-four patients were divided into 3 groups according to their HbA1c levels: nondiabetic normoglycemic patients (HbA1c < 5.7%), nondiabetic hyperglycemic patients (HbA1c < 6.5%), and controlled diabetic patients (HbA1c < 7%). Primary outcomes were dimensional changes in height (VDH) and width (DW) of the peri-implant defect. Secondary outcomes were evaluations of periodontal parameters of adjacent tooth sites, wound healing, marginal bone loss (MBL), and survival and success rates. At T₁ (6 months), mean VDH values in groups 1, 2, and 3 were, respectively, 0.07, 0.5, and 0.25 mm. Mean DW values in those same groups were, respectively, 0.07, 0.38, and 0.33 mm. HbA1c levels were not statistically related to VDH and DW values at T₁. No statistically significant differences were observed in MBL between groups (p = 0.230). Implant survival and success rates were, respectively, 98% and 96%. Simultaneous guided bone regeneration is a feasible procedure for the treatment of horizontal bone deficiencies in controlled diabetic patients.

A partially demineralized allogeneic bone graft: in vitro osteogenic potential and preclinical evaluation in two different intramembranous bone healing models

In skeletal surgical procedures, bone regeneration in irregular and hard-to-reach areas may present clinical challenges. In order to overcome the limitations of traditional autologous bone grafts and bone substitutes, an extrudable and easy-to-handle innovative partially demineralized allogenic bone graft in the form of a paste has been developed. In this study, the regenerative potential of this paste was assessed and compared to its clinically used precursor form allogenic bone particles. Compared to the particular bone graft, the bone paste allowed better attachment of human mesenchymal stromal cells and their commitment towards the osteoblastic lineage, and it induced a pro-regenerative phenotype of human monocytes/macrophages. The bone paste also supported bone healing in vivo in a guide bone regeneration model and, more interestingly, exhibited a substantial bone-forming ability when implanted in a critical-size defect model in rat calvaria. Thus, these findings indicate that this novel partially demineralized allogeneic bone paste that combines substantial bone healing properties and rapid and ease-of-use may be a promising alternative to allogeneic bone grafts for bone regeneration in several clinical contexts of oral and maxillofacial bone grafting.

The role of strontium ranelate and guided bone regeneration in osteoporotic and healthy conditions

BACKGROUND/ OBJECTIVES

SR is a chemical agent developed for the treatment of osteoporosis. In vitro, SR enhanced replication of osteoprogenitor cells and bone formation. In vivo, in ovariectomized rats SR prevented the biomechanical deterioration of bone while in non-ovariectomized rats, enhanced bone architecture and increased trabecular and cortical bone mass. The aim of this study was to evaluate the effect of SR on bone healing of calvarial critical size defects treated with a deproteinized bovine bone mineral (DBBM) and a collagen barrier (CM), in healthy and osteoporotic rats.

MATERIAL AND METHODS

Sixty-four, 4-month-old Wistar female rats were used. Osteoporosis was induced by ovariectomy and calcium-deficient diet in half of them. Sixteen ovariectomized (OSR) and 16 healthy (HSR) rats were treated with SR while no medication was administered in the remaining 16 healthy (H) and 16 ovariectomized (O) rats. At 6 weeks after ovariectomy, a 5mm defect was created in each parietal bone of every animal. One defect was treated with DBBM and CM, while the contralateral was left untreated. Qualitative and quantitative histological analysis was performed at 30 and 60 days of healing. A generalized estimating equations test was performed to evaluate the effect of SR and osteoporosis, on new bone formation (NB).

RESULTS

After 30 days of healing, NB in the untreated defects was 3.4%±1.7%, 4.3%±6.2%, 3.2±4.5%, 15.9±23.5% in O, OSR, H and HSR groups, respectively; after 60 days, NB was 4.7%±4.3%, 11.3%±7%, 7.1%±13.2, 12.1%±13.5%, respectively. In the GBR-treated defects, after 30 days, NB was 2.6%±1.4%, 2.4%±1.6%, 4.5%±4.1%, 10.3%±14.4% in O, OSR, H and HSR groups, respectively; after 60 days, NB was 2.2%±1.6%, 4.3%±4.2%, 7%±5.1%, 10.8%±17.4%, respectively. Osteoporosis (p=0.008) and the absence of strontium ranelate treatment (p=0.01) had a negative impact on NB.

CONCLUSION

SR may promote bone formation in calvarial defects in healthy and osteoporotic rats, albeit in a moderate extent.

Alendronate Impairs Healing of Calvaria Critical Defects After Bone Graft With Different Bone Substitute Materials

PURPOSE

The aim of this preclinical study was to evaluate the healing of critical-sized defects (CSDs) in the calvarial bone of rats grafted with deproteinized bovine bone graft (DBB) and with a combination of hydroxyapatite (HA) and β-tricalcium phosphate (TCP) and bisphosphonate treatment.

MATERIALS AND METHODS

Eighty-four animals were randomly divided into 2 groups according to the type of solution administered: the control group (CTR, saline solution) and the test group (alendronate [ALD]; sodium alendronate-50 μg/kg/day). Medications were administered via oral gavage starting 15 days before the surgical procedure until the end of the experiment. A CSD (5 mm in diameter) was made in the calvaria of each animal, and the rats were randomly allocated to 3 subgroups according to the biomaterial used to fill the defect: coagulum, DBB, and HA/TCP. The animals were sacrificed 15 and 60 days after the surgical procedure (n = 7 animals/period/subgroup). Microcomputed tomography was used to evaluate the percentage of mineralized tissues (volume). The amount of newly formed bone and remaining bone substitute material in the calvaria were analyzed by histomorphometry.

RESULTS

There were no differences between the CTR and ALD groups with regard to the volume of mineralized tissues. The DBB and HA/TCP subgroups of CTR animals presented a significant increase in newly formed bone compared with these subgroups of ALD animals after 60 days of healing.

CONCLUSIONS

Collectively, our findings indicate that the use of oral ALD reduced bone formation in CSD in the calvaria of rats grafted with DBB and HA/TCP.

Biological properties of bone marrow stem cells and adipose-derived stem cells derived from T2DM rats: a comparative study

Background

Patients with type 2 diabetes mellitus (T2DM), especially those with poor glycemic control, are characterized by low bone mass and destruction of bone microstructure. Nowadays, autologous mesenchymal stem cells (auto-MSCs) have been used to repair defects and promote tissue regeneration due to handy source, low immunogenicity and self-renewing and multi-differentiating potential. However, T2DM changed the biological properties of auto-MSCs, and investigating the most suitable auto-MSCs for T2DM patients becomes a focus in tissue engineering.

Results

In this research, we compared the biological characteristics of adipose-derived stem cells (ASCs) and bone marrow stem cells (BMSCs) derived from T2DM rats. These results demonstrated that ASCs had a higher proliferation rate, colony-formation and cell-sheet forming ability, while BMSCs got better osteogenesis-related staining, expression of osteogenesis-related genes and proteins, and osteogenic capacity in vitro.

Conclusions

As it turned out, ASCs from T2DM had a higher proliferation, while BMSCs had significantly higher osteogenetic ability no matter in vitro and in vivo. Therefore, we should take into account the specific and dominated properties of MSC according to different needs to optimize the protocols and improve clinical outcomes for tissue regeneration of T2DM patients.

Evaluation of Collagen Membranes Coated with Testosterone and Alendronate to Improve Guided Bone Regeneration in Mandibular Bone Defects in Minipigs

OBJECTIVES

The purpose of the present in vivo study was to evaluate whether pericard collagen membranes coated with ancillary amounts of testosterone and alendronate in a poly-lactic glycolic acid (PLGA) carrier as compared to uncoated membranes will improve early bone regeneration.

MATERIAL AND METHODS

In each of 16 minipigs, four standardized mandibular intraosseous defects were made bilaterally. The defects were filled with Bio-Oss^® granules and covered with a non-coated or coated membrane. Membranes were spray-coated with 4 layers of PLGA containing testosterone and alendronate resulting in 20, 50 or 125 μg/cm² of testosterone and 20 µg/cm² alendronate (F20, F50, F125). Non-coated membranes served as controls (F0). Animals were sacrificed at 6 and 12 weeks after treatment. Qualitative and quantitative histological evaluations of bone regeneration were performed. Differences between groups were assessed by paired Student's t-test.

RESULTS

Light microscopical analysis showed new bone formation that was in close contact with the Bio-Oss^® surface without an intervening non-mineralized tissue layer. Histomorphometric analysis of newly formed bone showed a significant 20% increase in area in the F125 coated membrane treated defects (40 [SD 10]%) compared to the F0 treated defects after 6 weeks (33 [SD 10]%, P = 0.013). At week 12, the total percentage of new bone was increased compared to week 6, but no increase in newly formed bone compared to F0 was observed.

CONCLUSIONS

The data from this in vivo study indicate that F125 collagen membranes coated with testosterone and alendronate resulted in superior bone formation (+24%) when normalized to control sites using uncoated membranes.

Histological comparison of DBBM and platelet rich fibrin for guided bone regeneration in a rabbit model

Purpose

To histologically evaluate the use of bovine derived deproteinized xenograft (DBBM), leukocyte and platelet rich fibrin (L-PRF) and the combination of both in Guided Bone Regeneration (GBR) performed in non-critical size defects in rabbit.

Methods

A prospective experimental study was performed. Four bone defects in the tibiae of 12 rabbits were made and each of them was filled with DBBM, L-PRF, a combination of DBBM + L-PRF or was left to heal as control site. All defects were covered with a collagen membrane. Rabbits were randomly distributed in three groups and euthanatized at 3, 6 or 9 weeks. Samples were obtained and histologically analyzed to determine vital bone, connective tissue and remaining graft particles percentage. Analysis of variance, Kruskal Wallis and non-paired t-test where used to evaluate the significance of the results.

Results

At 3 weeks of healing, DBBM showed significantly more vital bone percentage than L-PRF (p = 0,05) and DBBM + L-PRF showed significantly less connective tissue than control (p < 0,05). All other groups showed no statistical difference between them. At 6 weeks of healing, DBBM showed significantly more vital bone percentage than L-PRF (p < 0,05), DBBM + L-PRF (p < 0,05) and control (p < 0,05) and there wasn't any other significant difference regarding to connective tissue or remaining particle percentage between groups. At t 9 weeks healing period, there weren't any significant differences between groups.

Conclusions

DBBM seems to enhance vital bone formation at early healing stages. The use of L-PRF alone or combined with DBBM, didn't show any histological improvement regarding to vital bone formation. The use of DBBM, alone or in conjunction with L-PRF showed a trend to reduce connective tissue percentage. The use of L-PRF combined with DBBM didn't affect the remaining particle percentage.

Short time guided bone regeneration using beta-tricalcium phosphate with and without fibronectin - An experimental study in rats

Background

 The aim of this histomorphometric study was to assess the bone regeneration potential of beta-tricalcium phosphate with fibronectin (β-TCP-Fn) in critical-sized defects (CSDs) in rats calvarial, to know whether Fn improves the new bone formation in a short time scope.

Material and Methods

 CSDs were created in 30 Sprague Dawley rats, and divided into four groups (2 or 6 weeks of healing) and type of filling (β-TCP-Fn, β-TCP, empty control). Variables studied were augmented area (AA), gained tissue (GT), mineralized/non mineralized bone matrix (MBM/NMT) and bone substitute (BS).

Results

60 samples at 2 and six weeks were evaluated. AA was higher for treatment groups comparing to controls (p < 0.001) and significant decrease in BS area in the β-TCP-Fn group from 2 to 6 weeks (p = 0.031). GT was higher in the β-TCP-Fn group than in the controls expressed in % (p = 0.028) and in mm2 (p = 0.011), specially at two weeks (p=0.056).

Conclusions

 Both β-TCP biomaterials are effective as compared with bone defects left empty in maintaining the volume. GT in defects regeneration filed with β-TCP-Fn are significantly better in short healing time when comparing with controls but not for β-TCP used alone in rats calvarial CSDs.

Key words:Bone regeneration, biomaterials, experimental design, histology.

Proteomic and Transcriptomic Approaches for Studying Bone Regeneration in Health and Systemically Compromised Conditions

Bone regeneration is a complex biological process, where the molecular mechanisms are only partially understood. In an ageing population, where the prevalence of chronic diseases with an impact on bone metabolism is increasing, it becomes crucial to identify new strategies that would improve regenerative outcomes also in medically compromised patients. In this context, omics are demonstrating a great potential, as they offer new insights on the molecular mechanisms regulating physiologic/pathologic bone healing and, at the same time, allow the identification of new diagnostic and therapeutic targets. This review provides an overview on the current evidence on the use of transcriptomic and proteomic approaches in bone regeneration research, particularly in relation to type 1 diabetes and osteoporosis, and discusses future scenarios and potential benefits and limitations on the integration of multi-omics. It is suggested that future research will leverage the synergy of omics with statistical modeling and bioinformatics to prompt the understanding of the biology underpinning bone formation in health and medically compromised conditions. With an eye toward personalized medicine, new strategies combining the mining of large datasets and bioinformatic data with a detailed characterization of relevant phenotypes will need to be pursued to further the understanding of disease mechanisms.

Effect of Gellan Gum/Tuna Skin Film in Guided Bone Regeneration in Artificial Bone Defect in Rabbit Calvaria

It is necessary to prevent the invasion of soft tissue into bone defects for successful outcomes in guided bone regeneration (GBR). For this reason, many materials are used as protective barriers to bone defects. In this study, a gellan gum/tuna skin gelatin (GEL/TSG) film was prepared, and its effectiveness in bone regeneration was evaluated. The film exhibited average cell viability in vitro. Experimental bone defects were prepared in rabbit calvaria, and a bone graft procedure with beta-tricalcium phosphate was done. The film was used as a membrane of GBR and compared with results using a commercial collagen membrane. Grafted material did not show dispersion outside of bone defects and the film did not collapse into the bone defect. New bone formation was comparable to that using the collagen membrane. These results suggest that the GEL/TSG film could be used as a membrane for GBR.

Imaging of nano-hydroxyapatite/chitosan scaffolds using a cone beam computed tomography device on rat calvarial defects with histological verification

OBJECTIVES

Τhis study aims at determining the ability of cone beam computed tomography (CBCT) to visualize critical-size defects (CSD) created at rat calvaria and filled with 75/25 w/w nano-hydroxyapatite/chitosan (nHAp/CS) scaffolds, prior to their histological investigation.

MATERIALS AND METHODS

Thirty adult Sprague Dawley rats, 15 males and 15 females, were used. Two CSD, 5 mm in diameter, were bilaterally trephined in the parietal bone. The right CSD was filled with nHAp/CS scaffold, while the left CSD remained empty, as the control group. Two female rats died post-operatively. Rats were euthanized at 2, 4, and 8 weeks post-surgery. Twenty-eight specimens (15 × 2 × 10 mm) were resected-containing both CSDs-and then scanned using a NewTom VGi CBCT imaging unit (Verona, Italy). The manufacturer's software trace region profile tool (NNT v6.2, Verona, Italy) was used in selected axial slices. The greyscale value (in ^VGiHU) and the traced/selected region of interest (ROI, in mm²) of those areas were automatically calculated. Subsequently, all specimens were histologically examined.

RESULTS

An increased ^VGiHU (P = 0.000), was observed in the experimental group relative to the control group. The ROI of CSD (in mm²) was significantly reduced (P = 0.001) from the fourth to the eighth week in both groups. No statistically significant difference between male and female rats (P = 0.188) was observed with respect to ^VGiHU.

CONCLUSIONS

The nHAp/CS scaffolds are easily visualized using a particular high-resolution CBCT device.

CLINICAL RELEVANCE

Both the CBCT measurements and also the histological results suggest that the nHAp/CS scaffold presence contributes to new bone formation in rat calvarial CSD.

Leukocyte- and platelet-rich fibrin as graft material improves microRNA-21 expression and decreases oxidative stress in the calvarial defects of diabetic rabbits

OBJECTIVE

Leukocyte- and platelet-rich fibrin (L-PRF) represents a natural, low-cost product which may promote tissue healing by mechanisms not fully elucidated. Diabetes mellitus (DM) disrupts bone healing by inducing inflammation and oxidative stress (OS), mechanisms regulated by microRNAs (miRs). The aim of the present study was to investigate the microRNA-21 (miR-21) involvement in diabetic bone regeneration using L-PRF alone or in combination with a standard grafting material.

DESIGN

After the induction of diabetes (alloxan 100 mg/kg), four cranial osteotomies were made in diabetic (n = 12) and non-diabetic (n = 12) rabbits: one was left empty and the remaining three were grafted with L-PRF, bovine hydroxyapatite (Bio-Oss^®) and L-PRF + Bio-Oss®. Two and eight weeks postoperatively, the samples were harvested for miR-21 expression (Real-time RT-PCR) and enzyme-linked immunosorbent assay analyses.

RESULTS

Diabetic rabbits showed decreased miR-21 and matrix metalloproteinase-9 (MMP-9) protein expression while increased malondialdehyde (MDA) levels two weeks postoperatively; however, there were no significant differences in miR-21 and MMP-9 levels between diabetic and non-diabetic rabbits in samples taken eight weeks postoperatively. Application of L-PRF and L-PRF + Bio-Oss^® improved miR-21 and MMP-9 and decreased MDA levels while Bio-Oss® alone enhanced superoxide dismutase (SOD) activity levels in diabetic rabbits.

CONCLUSION

L-PRF alone or in combination with bovine hydroxyapatite as bone graft could be beneficial in DM since it seems to improve inflammation-modulatory miR-21 expression and decreases oxidative stress.

Influence of Cigarette Smoke Inhalation on an Autogenous Onlay Bone Graft Area in Rats with Estrogen Deficiency: A Histomorphometric and Immunohistochemistry Study

PURPOSE

The present study aimed to evaluate the influence of cigarette smoke inhalation on an autogenous onlay bone graft area, either covered with a collagen membrane or not, in healthy and estrogen-deficient rats through histomorphometry and immunohistochemistry.

MATERIALS AND METHODS

Sixty female rats (Wistar), weighing 250-300 g, were randomly divided and allocated into groups (either exposed to cigarette smoke inhalation or not, ovariectomized and SHAM). After 15 days, the test group underwent cigarette smoke inhalation. Sixty days after exposition, autogenous bone grafting was only performed on all right hemimandibles, and the left ones underwent autogenous onlay bone grafting with the collagen membrane (BioGide^®). The graft was harvested from the parietal bone and attached to the animals' jaws (right and left). They were euthanized at 21, 45, and 60 days after grafting. Histological measurements and immunohistochemical analyses were performed, and results were submitted to a statistical analysis.

RESULTS

The addition of a collagen membrane to the bone graft proved more efficient in preserving graft area if compared to the graft area without a collagen membrane and the one associated with cigarette smoke inhalation at 21 (p = 0.0381) and 60 days (p = 0.0192), respectively. Cigarette smoke inhalation combined with ovariectomy promoted a significant reduction of the autogenous graft area at 21 and 60 days. At 45 days, no statistically significant results were observed. In the immunohistochemical analysis, the ovariectomized and smoking subgroups, combined or not with collagen membrane, received moderate and intense immunolabeling at 21 days for Receptor Activator of Nuclear Factor Kappa-B Ligand (RANKL) (p = 0.0017 and p = 0.0381, respectively). For Osteoprotegerin (OPG), intense immunolabeling was observed in most subgroups under analysis at 60 days.

CONCLUSION

Smoking inhalation promoted resorption on the autogenous onlay bone graft, mainly when associated with ovariectomy. Furthermore, when associated with the collagen membrane, a lower resorption rate was observed if compared to the absence of the membrane.

Osseointegration in osteoporotic-like condition: A systematic review of preclinical studies

Osteoporosis is one of the most common skeletal disorders affecting a significant percentage of people worldwide. Research data suggested that systemic diseases such as osteoporosis could act as risk factors for osseointegration, jeopardizing the healing process and thus the predictability of dental implant success on compromised patients. It is well accepted that preclinical studies in animal models reproducing the osteoporotic condition are one of the most important stages in the research of new biomaterials and therapeutic modalities. The aim of this systematic review was to investigate whether osteoporosis compromises dental implant osseointegration in experimental osteoporotic-like conditions. A 3-stage systematic literature research was conducted in MEDLINE via OVID and EMBASE up to and including March 2017. Experimental studies reporting on dental implant osseointegration on different osteoporotic animal models were assessed. The studies had to report on the percentage of bone-to-implant contact (%BIC) as the primary outcome. ARRIVE guidelines for reporting on animal research were applied to evaluate the methodological quality and risk of bias of the studies. Fifty-seven studies met the inclusion criteria and were assessed qualitatively. The most adopted animal model was the rat. A variability of %BIC values was observed, ranging from 30% to 99% and from 26% to 94% for the healthy and osteoporotic group, respectively. The great majority (47) of the included studies concluded that estrogen deficiency significantly affects BIC values, 9 studies stated that it was not possible to observe statistical differences in BIC between ovariectomized and healthy groups and 1 study did not provide a comparison between the healthy and osteoporotic group. Owing to the great heterogeneity in implant surface, study design, observation time-points, site of implant placement and reported outcomes, a meta-analysis could not be performed. An overall high risk of bias was observed, owing to the limited information on animal housing and husbandry, baseline characteristics and health status, ethical statement and allocation to the experimental groups provided. Although the available studies seem to suggest a lower osseointegration in osteoporotic-like conditions, no robust conclusions can be drawn due to the great heterogeneity and overall low quality of the available studies. Future studies with emphasis on minimizing the possible sources of bias and evaluating osseointegration of dental implants placed into jawbones instead of long bones are warranted.

Guided bone regeneration using beta-tricalcium phosphate with and without fibronectin-An experimental study in rats

OBJECTIVE

This histomorphometric study compared bone regeneration potential of beta-tricalcium phosphate with fibronectin (β-TCP-Fn) in critical-sized calvarial defects (CSDs) in rats to assess whether fibronectin (Fn) improved new bone formation.

MATERIAL AND METHODS

Critical-sized calvarial defects were created in 30 adult male Sprague Dawley rats, which were divided into four groups according to the time of euthanasia (6 or 8 weeks of healing) and type of filling (β-TCP-Fn/6 weeks, β-TCP/6 weeks, β-TCP-Fn/8 weeks and β-TCP/8 weeks). The primary variables related to new bone formation were augmented area (AA) and gained tissue (GT; sum of mineralized bone matrix [MBM] and bone substitute [BS]). Secondary variables were the diameter of the defect, MBM, non-mineralized tissue (NMT) and BS.

RESULTS

A total of 29 rats and 58 histological samples were evaluated, 28 (48.3%) samples obtained at 6 weeks and 30 (51.7%) at 8 weeks, homogeneously distributed between right and left sides. Thirteen (22.4%) were treated with β-TCP-Fn, 16 (27.6%) with β-TCP and 29 (50%) were controls. At 8 weeks, histomorphometric analysis showed significant differences in AA using β-TCP and β-TCP-Fn versus controls (p = 0.001 and p = 0.005, respectively). Bone turnover expressed as % within the target area was slightly higher but not statistically significant in the β-TCP-Fn than in β-TCP (MBM) at 6 weeks versus 8 weeks (p = 0.067 and p = 0.335, respectively). Finally, the total GT area in mm² was higher using β-TCP-Fn as compared to β-TCP (p = 0.044).

CONCLUSIONS

β-TCP-Fn was slightly but non-significantly more effective than β-TCP without Fn for improving the volume of regenerated bone in CSDs of rats, possibly allowing a more efficient bone remodelling process. This effect however should continue being investigated.

Application of nano-hydroxyapatite/chitosan scaffolds on rat calvarial critical-sized defects: A pilot study

BACKGROUND

The purpose of this pilot study was to evaluate for the first time the effect of 75/25 w/w nano-Hydroxyapatite/Chitosan (nHAp/CS) scaffolds on Guided Bone Regeneration (GBR) in rat calvarial critical-sized defects (CSDs).

MATERIAL AND METHODS

Six adult Sprague Dawley rats, 3 males and 3 females, were used. Two CSDs, full thickness and 5mm in diameter, were trephined in both sides of the parietal bone. The right CSD was filled with nHAp/CS scaffold, while the left CSD remained empty, as the control group. The wound was sutured in layers. Rats were euthanized with diethyl ether inhalation at 2, 4 and 8 weeks after surgical procedure. Histological and histomorphometric analysis was performed within distinct regions of interest (ROI): the lateral area inward of the middle sagittal seam; the lateral area outward of the middle sagittal seam and the central area.

RESULTS

The mean surface of newly formed bone (in μm2) in the lateral area inward of the middle sagittal seam of all rats was significantly higher (P=0.039) in the experimental group (91733.00±38855.60) than the control group (46762.17±25507.97). The NOex-c, defined as total number of osteocytes (OST) in newly formed bone surface in experimental group [experimental OST] minus the total number of osteocytes in newly formed bone surface in control group [control OST], was significantly greater (P=0.029) at 4th week post-surgery. Within the experimental group, a statistically significant increase (P=0.042) in the surface of newly formed bone was noticed in rats euthanized in 4th week compared with rats euthanized in 2nd week after surgery in the lateral area inward of the middle sagittal seam.

CONCLUSIONS

The results of this study suggest that 75/25 w/w nHAp/CS scaffolds should be considered as a suitable biomaterial for GBR.

Degradation pattern of a porcine collagen membrane in an in vivo model of guided bone regeneration

BACKGROUND AND OBJECTIVE

Although collagen membranes have been clinically applied for guided tissue/bone regeneration for more than 30 years, their in vivo degradation pattern has never been fully clarified. A better understanding of the different stages of in vivo degradation of collagen membranes is extremely important, considering that the biology of bone regeneration requires the presence of a stable and cell/tissue-occlusive barrier during the healing stages in order to ensure a predictable result. Therefore, the aim of this study was to investigate the degradation pattern of a porcine non-cross-linked collagen membrane in an in vivo model of guided bone regeneration (GBR).

MATERIAL AND METHODS

Decalcified and paraffin-embedded specimens from calvarial defects of 18, 10-month-old Wistar rats were used. The defects were treated with a double layer of collagen membrane and a deproteinized bovine bone mineral particulate graft. At 7, 14 and 30 days of healing, qualitative evaluation with scanning electron microscopy and atomic force microscopy, and histomorphometric measurements were performed. Markers of collagenase activity and bone formation were investigated using an immunofluorescence technique.

RESULTS

A significant reduction of membrane thickness was observed from 7 to 30 days of healing, which was associated with progressive loss of collagen alignment, increased collagen remodeling and progressive invasion of woven bone inside the membranes. A limited inflammatory infiltrate was observed at all time points of healing.

CONCLUSION

The collagen membrane investigated was biocompatible and able to promote bone regeneration. However, pronounced signs of degradation were observed starting from day 30. Since successful regeneration is obtained only when cell occlusion and space maintenance exist for the healing time needed by the bone progenitor cells to repopulate the defect, the suitability of collagen membranes in cases where long-lasting barriers are needed needs to be further reviewed.

Protein expression during early stages of bone regeneration under hydrophobic and hydrophilic titanium domes. A pilot study

BACKGROUND AND OBJECTIVES

There is significant evidence that, during the early stages of osseointegration, moderately rough hydrophilic (SLActive) surfaces can accelerate osteogenesis and increase bone-to-implant contact in comparison to hydrophobic (SLA) surfaces. However, very little is known regarding the molecular mechanisms behind the influence that surface chemistry modifications to increase hydrophilicity determine on bone healing. The aim of this study was to describe for the first time the proteins and related signalling pathways expressed during early osseous healing stages under SLA and SLActive titanium domes for guided bone regeneration.

MATERIAL AND METHODS

One SLA and 1 SLActive dome with an internal diameter of 5.0 mm and a height of 3.0 mm were secured to the parietal bones of nine 6-month-old male New Zealand rabbits. Three animals were randomly euthanized at 4, 7 and 14 days and the newly formed tissues retrieved under the domes were analysed with liquid chromatography-mass spectrometry/mass spectrometry. STRING and KEGG databases were applied for Gene Ontology and pathway analyses.

RESULTS

A different modulation of several pathways was detected between the 2 groups at all healing times. The main differences in the osseous healing response associated to the 2 surfaces were related to pathways involved in regulating the inflammatory response, differentiation of osteoblast precursors and skeletogenesis. At day 7, the highest number of proteins and the highest cellular activity were observed in both groups, although a more complex and articulated proteome in terms of cellular metabolism and signal transduction was observed in SLActive samples.

CONCLUSION

This is the first study describing the proteome expressed during early healing stages of guided bone regeneration and osseointegration. A combination of enhanced early osteogenic response and reduced inflammatory response were suggested for the hydrophilic group. Future studies are needed to corroborate these findings and explore the molecular effects of different titanium surfaces on the cascade of events taking place during bone formation.

Maxillary sinus augmentation with leukocyte and platelet-rich fibrin and deproteinized bovine bone mineral: A split-mouth histological and histomorphometric study

OBJECTIVES

To evaluate the effect of leukocyte and platelet-rich fibrin (L-PRF) in combination with deproteinized bovine bone mineral (DBBM) on bone regeneration in maxillary sinus augmentation.

MATERIAL AND METHODS

Thirteen patients (nine males and four females, mean age ± SD; 49.92 ± 10.37) were enrolled to the study. 26 maxillary sinus augmentation procedures were randomly performed using DBBM and L-PRF mixture (test) or DBBM alone (control) in a split-mouth design. The same surgical procedures were performed in both groups, and bone biopsies were harvested from the implant sites 6 months postoperatively for histological and histomorphometric evaluations as the primary outcome of the study. Implants were placed and then loaded in the augmented sites after 6 months. The secondary outcomes included clinical and radiographic data and were obtained pre- and postoperatively.

RESULTS

There was no qualitative difference in histological analyses among the groups. In all samples, a newly formed bone was in direct contact with the residual material. The percentages of newly formed bone (test; 21.38 ± 8.78% and control; 21.25 ± 5.59%), residual bone graft (test; 25.95 ± 9.54% and control; 32.79 ± 5.89%), bone graft in contact with the newly formed bone (test; 47.33 ± 12.33% and control; 54.04 ± 8.36%), and soft tissue (test; 52.67 ± 12.53% and control; 45.96 ± 8.36%) were similar among the groups (p < .05). Similar radiographic bone height in the augmented area was observed, and implant survival rate was 100% for both groups.

CONCLUSIONS

Both techniques were effective for maxillary sinus augmentation, and after 6 months of healing, the addition of L-PRF in DBBM did not improve the amount of regenerated bone or the amount of the graft integrated into the newly formed bone under histological and histomorphometric evaluation.

The effect of experimental diabetes and glycaemic control on guided bone regeneration: histology and gene expression analyses

OBJECTIVES

To investigate the effect of experimental diabetes and metabolic control on intramembranous bone healing following guided bone regeneration (GBR).

MATERIAL AND METHODS

Ninety-three Wistar rats were allocated to three experimental groups, healthy (H), uncontrolled diabetes (D) and controlled diabetes (CD). Twenty one days following diabetes induction, a standardised 5-mm defect was created at the mid-portion of each parietal bone. In 75 animals (25H, 25D, 25CD), one defect was treated with an intracranial and extracranial membrane according to the GBR principle, and one defect was left empty (control); five animals per group were then randomly sacrificed at 3, 7, 15, 30 and 60 days and processed for decalcified histology. In 18 animals (6H, 6D, 6CD), both defects were treated according to the GBR principle; three animals from each group were then randomly sacrificed at 7 and 15 days of healing and employed for gene expression analysis.

RESULTS

Application of the GBR therapeutic principle led to significant bone regeneration even in the D group. However, at 15 and 30 days, the osteogenesis process was impaired by uncontrolled diabetes, as shown by the significant reduction in terms of defect closure (38-42%) and newly formed bone (54-61%) compared to the healthy group. The comparison of the D vs. H group at 15 days of healing yielded the largest number of genes with significantly differential expression, among which various genes associated with the ossification process (bmp4, ltbp4, thra and cd276) were identified.

CONCLUSIONS

Uncontrolled diabetes seems to affect early phases of the bone regeneration following GBR. A misregulation of genes and pathways related to cell division, energy production, inflammation and osteogenesis may account for the impaired regeneration process in D rats. Further studies are warranted to optimise the GBR process in this medically compromised patient population.

Pre-clinical in vivo models for the screening of bone biomaterials for oral/craniofacial indications: focus on small-animal models

Preclinical in vivo experimental studies are performed for evaluating proof-of-principle concepts, safety and possible unwanted reactions of candidate bone biomaterials before proceeding to clinical testing. Specifically, models involving small animals have been developed for screening bone biomaterials for their potential to enhance bone formation. No single model can completely recreate the anatomic, physiologic, biomechanic and functional environment of the human mouth and jaws. Relevant aspects regarding physiology, anatomy, dimensions and handling are discussed in this paper to elucidate the advantages and disadvantages of small-animal models. Model selection should be based not on the 'expertise' or capacities of the team, but rather on a scientifically solid rationale, and the animal model selected should reflect the question for which an answer is sought. The rationale for using heterotopic or orthotopic testing sites, and intraosseous, periosseous or extraskeletal defect models, is discussed. The paper also discusses the relevance of critical size defect modeling, with focus on calvarial defects in rodents. In addition, the rabbit sinus model and the capsule model in the rat mandible are presented and discussed in detail. All animal experiments should be designed with care and include sample-size and study-power calculations, thus allowing generation of meaningful data. Moreover, animal experiments are subject to ethical approval by the relevant authority. All procedures and the postoperative handling and care, including postoperative analgesics, should follow best practice.

The effect of hyperglycaemia on osseointegration: a review of animal models of diabetes mellitus and titanium implant placement

Patients with type 2 diabetes mellitus have a higher risk of dental and/or orthopaedic implant failure. However, the mechanism behind this phenomenon is unclear, and animal studies may prove useful in shedding light on the processes involved. This review considers the available literature on rat models of diabetes and titanium implantation.

INTRODUCTION

The process of osseointegration whereby direct contact is achieved between bone and an implant surface depends on healthy bone metabolism. Collective evidence suggests that hyperglycaemia adversely affects bone turnover and the quality of the organic matrix resulting in an overall deterioration in the quality, resilience and structure of the bone tissue. This in turn results in compromised osseointegration in patients receiving dental and orthopaedic implants. The incidence of diabetes mellitus (DM), which is a chronic metabolic disorder resulting in hyperglycaemia, is rising. Of particular significance is the rising incidence of adult onset type 2 diabetes mellitus (T2DM) in an ageing population. Understanding the effects of hyperglycaemia on osseointegration will enable clinicians to manage health outcomes for patients receiving implants. Much of our understanding of how hyperglycaemia affects osseointegration comes from animal studies.

METHODS

In this review, we critically analyse the current animal studies.

RESULTS

Our review has found that most studies used a type 1 diabetes mellitus (T1DM) rodent model and looked at a young male population of rodents. The pathophysiology of T1DM is however very different to that of T2DM and is not representative of T2DM, the incidence of which is rising in the ageing adult population. Genetically modified rats have been used to model T2DM, but none of these studies have included female rats and the metabolic changes in bone for some of these models used are not adequately characterized.

CONCLUSIONS

Therefore, the review suggests that the study population needs to be broadened to include both T1DM and T2DM models, older rats as well as young rats, and importantly animals from both sexes to reflect more accurately clinical practice.

Microarray gene expression during early healing of GBR-treated calvarial critical size defects

OBJECTIVES

To investigate the gene expression and molecular pathways implicated in the regulation of the osseous healing process following guided bone regeneration (GBR).

MATERIAL AND METHODS

Six 6-month-old Wistar male rats were used. Standardized 5-mm critical size defects were created in the parietal bones of each animal and treated with an extracranial and intracranial ePTFE membrane, according to the GBR principle. Three animals were randomly sacrificed after 7 and 15 days of healing. Total RNA was extracted from each sample and prepared for gene expression analysis. RNA quality and quantity were assessed, followed by hybridization of the cRNA to Affymetrix GeneChip Rat Genome 230 2.0 Arrays. The Affymetrix data were processed, and first-order analysis, quality control and statistical analysis were performed. Biological interpretation was performed via pathway and Gene Ontology (GO) analysis.

RESULTS

Between the 7- and 15-day samples, 538 genes were differently regulated. At day 7, inflammatory and immune responses were clearly upregulated. In addition, GO terms related to angiogenesis and cell cycle regulation were overexpressed. At day 15, a more complex cellular activity and cell metabolism were evident. The bone formation processes were significantly overexpressed, with several genes encoding growth factors, enzyme activity, and extracellular matrix formation found as upregulated. Remarkably, a negative regulation of Wnt signalling pathway was observed at 15 days.

DISCUSSION

The gene expression profile of the cells participating in osseous formation varied depending on the healing stage. A number of candidate genes that seem differentially expressed during early stages of intramembranous bone regeneration was suggested.

The effect of experimental osteoporosis on bone regeneration: part 2, proteomics results

OBJECTIVES

To identify and describe protein expression in a Wistar rat calvarial critical size defect (CSD) model following treatment with guided bone regeneration in healthy and osteoporotic conditions.

MATERIAL AND METHODS

Thirty-six 10-month-old female Wistar rats were used. Half of them were ovariectomized (OVX) and fed with a low-calcium diet to induce an osteoporotic-like status. In each animal of both groups, two 5-mm calvarial CSDs were treated with deproteinized bovine bone mineral graft particles and a bilayer collagen membrane. Six OVX and six control rats were randomly euthanized at 7, 14, and 30 days. One defect/animal was randomly chosen for proteomic analysis. Differently expressed proteins between the two groups were identified with matrix-assisted laser desorption time-of-flight mass spectrometry and liquid chromatography-mass spectrometry/mass spectrometry.

RESULTS

At 7 days, 29 and 27 proteins were, respectively, identified in the healthy and OVX animals. At 14 days, 103 proteins were detected in the healthy controls and 20 proteins in the OVX rats, while at 30 days, 31 and 75 proteins were identified, respectively. Only limited proteins known to play a role in the later stages of bone formation and maturation were identified within the animals 'proteomes.

DISCUSSION

The osseous formation process was quite immature even at 30 days of healing. An overexpression of inflammatory and stress response pathways was detected in the OVX animals, as well as a tendency toward a delayed maturation of the osseous wound and a reduced/delayed differentiation of osteoblast cell precursors.

The effect of experimental osteoporosis on bone regeneration: Part 1, histology findings

OBJECTIVES

To histologically define the healing events occurring in calvarial critical size defects (CSDs) following treatment with a collagen barrier for guided bone regeneration (GBR) and a particulate graft in healthy and osteoporotic conditions.

MATERIAL AND METHODS

Thirty-six 10-month-old, female, Wistar rats were used in this study. Half of them were ovariectomized (OVX) and fed with a low-calcium diet to induce an osteoporotic-like status. In each animal of both groups, two 5-mm CSDs were created, one in the centre of each parietal bone, and they were treated with a deproteinized bovine bone mineral (DBBM) particulate graft and a bi-layer collagen membrane. Six OVX and six healthy control rats were randomly euthanized at 7, 14 and 30 days. One defect per animal was randomly processed for decalcified histology. Three central sections were used for qualitative histology and histomorphometric analysis.

RESULTS

No significant difference in terms of percentage of newly formed bone was detected between the two groups at the different healing periods. However, a trend towards less bone formation and of poorer quality, expressed as reduced bone maturation, was detected in the OVX animals at 30 days.

DISCUSSION

According to this study, GBR with a collagen barrier and a DBBM graft can be successfully obtained also in osteoporotic-like conditions. Future studies considering longer healing periods and controlling for the confounding factors arising from the use of a particulate graft are needed to confirm these data.