Relaxation of rabbit psoas muscle fibres from rigor by photochemical generation of adenosine-5'-triphosphate

Nucleus Mechanosensing in Cardiomyocytes

Cardiac muscle contraction is distinct from the contraction of other muscle types. The heart continuously undergoes contraction-relaxation cycles throughout an animal's lifespan. It must respond to constantly varying physical and energetic burdens over the short term on a beat-to-beat basis and relies on different mechanisms over the long term. Muscle contractility is based on actin and myosin interactions that are regulated by cytoplasmic calcium ions. Genetic variants of sarcomeric proteins can lead to the pathophysiological development of cardiac dysfunction. The sarcomere is physically connected to other cytoskeletal components. Actin filaments, microtubules and desmin proteins are responsible for these interactions. Therefore, mechanical as well as biochemical signals from sarcomeric contractions are transmitted to and sensed by other parts of the cardiomyocyte, particularly the nucleus which can respond to these stimuli. Proteins anchored to the nuclear envelope display a broad response which remodels the structure of the nucleus. In this review, we examine the central aspects of mechanotransduction in the cardiomyocyte where the transmission of mechanical signals to the nucleus can result in changes in gene expression and nucleus morphology. The correlation of nucleus sensing and dysfunction of sarcomeric proteins may assist the understanding of a wide range of functional responses in the progress of cardiomyopathic diseases.

The force of the myosin motor sets cooperativity in thin filament activation of skeletal muscles

Contraction of striated muscle is regulated by a dual mechanism involving both thin, actin-containing filament and thick, myosin-containing filament. Thin filament is activated by Ca2+ binding to troponin, leading to tropomyosin displacement that exposes actin sites for interaction with myosin motors, extending from the neighbouring stress-activated thick filaments. Motor attachment to actin contributes to spreading activation along the thin filament, through a cooperative mechanism, still unclear, that determines the slope of the sigmoidal relation between isometric force and pCa (−log[Ca2+]), estimated by Hill coefficient nH. We use sarcomere-level mechanics in demembranated fibres of rabbit skeletal muscle activated by Ca2+ at different temperatures (12–35 °C) to show that nH depends on the motor force at constant number of attached motors. The definition of the role of motor force provides fundamental constraints for modelling the dynamics of thin filament activation and defining the action of small molecules as possible therapeutic tools.

Functional and structural differences between skinned and intact muscle preparations

Myofilaments and their associated proteins, which together constitute the sarcomeres, provide the molecular-level basis for contractile function in all muscle types. In intact muscle, sarcomere-level contraction is strongly coupled to other cellular subsystems, in particular the sarcolemmal membrane. Skinned muscle preparations (where the sarcolemma has been removed or permeabilized) are an experimental system designed to probe contractile mechanisms independently of the sarcolemma. Over the last few decades, experiments performed using permeabilized preparations have been invaluable for clarifying the understanding of contractile mechanisms in both skeletal and cardiac muscle. Today, the technique is increasingly harnessed for preclinical and/or pharmacological studies that seek to understand how interventions will impact intact muscle contraction. In this context, intrinsic functional and structural differences between skinned and intact muscle pose a major interpretational challenge. This review first surveys measurements that highlight these differences in terms of the sarcomere structure, passive and active tension generation, and calcium dependence. We then highlight the main practical challenges and caveats faced by experimentalists seeking to emulate the physiological conditions of intact muscle. Gaining an awareness of these complexities is essential for putting experiments in due perspective.

Phosphate has dual roles in cross-bridge kinetics in rabbit psoas single myofibrils

In this study, we aimed to study the role of inorganic phosphate (P_i) in the production of oscillatory work and cross-bridge (CB) kinetics of striated muscle. We applied small-amplitude sinusoidal length oscillations to rabbit psoas single myofibrils and muscle fibers, and the resulting force responses were analyzed during maximal Ca²⁺ activation (pCa 4.65) at 15°C. Three exponential processes, A, B, and C, were identified from the tension transients, which were studied as functions of P_i concentration ([P_i]). In myofibrils, we found that process C, corresponding to phase 2 of step analysis during isometric contraction, is almost a perfect single exponential function compared with skinned fibers, which exhibit distributed rate constants, as described previously. The [P_i] dependence of the apparent rate constants 2πb and 2πc, and that of isometric tension, was studied to characterize the force generation and P_i release steps in the CB cycle, as well as the inhibitory effect of P_i. In contrast to skinned fibers, P_i does not accumulate in the core of myofibrils, allowing sinusoidal analysis to be performed nearly at [P_i] = 0. Process B disappeared as [P_i] approached 0 mM in myofibrils, indicating the significance of the role of P_i rebinding to CBs in the production of oscillatory work (process B). Our results also suggest that P_i competitively inhibits ATP binding to CBs, with an inhibitory dissociation constant of ∼2.6 mM. Finally, we found that the sinusoidal waveform of tension is mostly distorted by second harmonics and that this distortion is closely correlated with production of oscillatory work, indicating that the mechanism of generating force is intrinsically nonlinear. A nonlinear force generation mechanism suggests that the length-dependent intrinsic rate constant is asymmetric upon stretch and release and that there may be a ratchet mechanism involved in the CB cycle.

Muscle myosin performance measured with a synthetic nanomachine reveals a class-specific Ca2+ -sensitivity of the frog myosin II isoform

KEY POINTS

A nanomachine made of an ensemble of seven heavy-meromyosin (HMM) fragments of muscle myosin interacting with an actin filament is able to mimic the half-sarcomere generating steady force and constant-velocity shortening. To preserve Ca²⁺ as a free parameter, the Ca²⁺ -insensitive gelsolin fragment TL40 is used to attach the correctly oriented actin filament to the laser-trapped bead acting as a force transducer. The new method reveals that the performance of the nanomachine powered by myosin from frog hind-limb muscles depends on [Ca²⁺ ], an effect mediated by a Ca²⁺ -binding site in the regulatory light chain of HMM. The Ca²⁺ -sensitivity is class-specific because the performance of the nanomachine powered by mammalian skeletal muscle myosin is Ca²⁺ independent. A model simulation is able to interface the nanomachine performance with that of the muscle of origin and provides a molecular explanation of the functional diversity of muscles with different orthologue isoforms of myosin.

ABSTRACT

An ensemble of seven heavy-meromyosin (HMM) fragments of myosin-II purified from the hindlimb muscles of the frog (Rana esculenta) is used to drive a synthetic nanomachine that pulls an actin filament in the absence of confounding effects of other sarcomeric proteins. In the present version of the nanomachine the +end of the actin filament is attached to the laser trapped bead via the Ca²⁺ -insensitive gelsolin fragment TL40, making [Ca²⁺ ] a free parameter. Frog myosin performance in 2 mm ATP is affected by Ca²⁺ : in 0.1 mm Ca²⁺ , the isometric steady force (F₀ , 15.25 pN) is increased by 50% (P = 0.004) with respect to that in Ca²⁺ -free solution, the maximum shortening velocity (V₀ , 4.6 μm s^-1 ) is reduced by 27% (P = 0.46) and the maximum power (P_max , 7.6 aW) is increased by 21% (P = 0.17). V₀ reduction is not significant for the paucity of data at low force, although it is solidified by a similar decrease (33%, P < 0.0001) in the velocity of actin sliding as indicated by an in vitro motility assay (V_f ). The rate of ATP-hydrolysis in solution (φ) exhibits a similar calcium dependence. Ca²⁺ titration curves for V_f and φ give K_d values of ∼30 μm. All the above mechanical and kinetic parameters are independent of Ca²⁺ when HMM from rabbit psoas myosin is used, indicating that the Ca²⁺ -sensitivity is a class-specific property of muscle myosin. A unique multiscale model allows interfacing of the nanomachine performance to that of the muscle of origin and identifies the kinetic steps responsible for the Ca²⁺ -sensitivity of frog myosin.

Orthophosphate increases the efficiency of slow muscle-myosin isoform in the presence of omecamtiv mecarbil

Omecamtiv mecarbil (OM) is a putative positive inotropic tool for treatment of systolic heart dysfunction, based on the finding that in vivo it increases the ejection fraction and in vitro it prolongs the actin-bond life time of the cardiac and slow-skeletal muscle isoforms of myosin. OM action in situ, however, is still poorly understood as the enhanced Ca²⁺-sensitivity of the myofilaments is at odds with the reduction of force and rate of force development observed at saturating Ca²⁺. Here we show, by combining fast sarcomere-level mechanics and ATPase measurements in single slow demembranated fibres from rabbit soleus, that the depressant effect of OM on the force per attached motor is reversed, without effect on the ATPase rate, by physiological concentrations of inorganic phosphate (Pi) (1-10 mM). This mechanism could underpin an energetically efficient reduction of systolic tension cost in OM-treated patients, whenever [Pi] increases with heart-beat frequency.

Omecamtiv mecarbil is a small molecule effector under clinical trial for the treatment of systolic heart failure. Here the authors define the molecular mechanisms of its inotropic action and find it can increase the efficiency of contraction in muscle fibres when the orthophosphate concentration rises with the beat frequency.

Temperature Effects on Force and Actin⁻Myosin Interaction in Muscle: A Look Back on Some Experimental Findings

Observations made in temperature studies on mammalian muscle during force development, shortening, and lengthening, are re-examined. The isometric force in active muscle goes up substantially on warming from less than 10 °C to temperatures closer to physiological (>30 °C), and the sigmoidal temperature dependence of this force has a half-maximum at ~10 °C. During steady shortening, when force is decreased to a steady level, the sigmoidal curve is more pronounced and shifted to higher temperatures, whereas, in lengthening muscle, the curve is shifted to lower temperatures, and there is a less marked increase with temperature. Even with a small rapid temperature-jump (T-jump), force in active muscle rises in a definitive way. The rate of tension rise is slower with adenosine diphosphate (ADP) and faster with increased phosphate. Analysis showed that a T-jump enhances an early, pre-phosphate release step in the acto-myosin (crossbridge) ATPase cycle, thus inducing a force-rise. The sigmoidal dependence of steady force on temperature is due to this endothermic nature of crossbridge force generation. During shortening, the force-generating step and the ATPase cycle are accelerated, whereas during lengthening, they are inhibited. The endothermic force generation is seen in different muscle types (fast, slow, and cardiac). The underlying mechanism may involve a structural change in attached myosin heads and/or their attachments on heat absorption.

Mechanical parameters of the molecular motor myosin II determined in permeabilised fibres from slow and fast skeletal muscles of the rabbit

KEY POINTS

The different performance of slow and fast muscles is mainly attributed to diversity of the myosin heavy chain (MHC) isoform expressed within them. In this study fast sarcomere-level mechanics has been applied to Ca²⁺ -activated single permeabilised fibres isolated from soleus (containing the slow myosin isoform) and psoas (containing the fast myosin isoform) muscles of rabbit for a comparative definition of the mechano-kinetics of force generation by slow and fast myosin isoforms in situ. The stiffness and the force of the slow myosin isoform are three times smaller than those of the fast isoform, suggesting that the stiffness of the myosin motor is a determinant of the isoform-dependent functional diversity between skeletal muscles. These results open the question of the mechanism that can reconcile the reduced performance of the slow MHC with the higher efficiency of the slow muscle.

ABSTRACT

The skeletal muscle exhibits large functional differences depending on the myosin heavy chain (MHC) isoform expressed in its molecular motor, myosin II. The differences in the mechanical features of force generation by myosin isoforms were investigated in situ by using fast sarcomere-level mechanical methods in permeabilised fibres (sarcomere length 2.4 μm, temperature 12°C, 4% dextran T-500) from slow (soleus, containing the MHC-1 isoform) and fast (psoas, containing the MHC-2X isoform) skeletal muscle of the rabbit. The stiffness of the half-sarcomere was determined at the plateau of Ca²⁺ -activated isometric contractions and in rigor and analysed with a model that accounted for the filament compliance to estimate the stiffness of the myosin motor (ε). ε was 0.56 ± 0.04 and 1.70 ± 0.37 pN nm^-1 for the slow and fast isoform, respectively, while the average strain per attached motor (s₀ ) was similar (∼3.3 nm) in both isoforms. Consequently the force per motor (F₀  = εs₀ ) was three times smaller in the slow isoform than in the fast isoform (1.89 ± 0.43 versus 5.35 ± 1.51 pN). The fraction of actin-attached motors responsible for maximum isometric force at saturating Ca²⁺ (T_0,4.5 ) was 0.47 ± 0.09 in soleus fibres, 70% larger than that in psoas fibres (0.29 ± 0.08), so that F₀ in slow fibres was decreased by only 53%. The lower stiffness and force of the slow myosin isoform open the question of the molecular basis of the higher efficiency of slow muscle with respect to fast muscle.

Maximum limit to the number of myosin II motors participating in processive sliding of actin

In this work, we analysed processive sliding and breakage of actin filaments at various heavy meromyosin (HMM) densities and ATP concentrations in IVMA. We observed that with addition of ATP solution, the actin filaments fragmented stochastically; we then determined mean length and velocity of surviving actin filaments post breakage. Average filament length decreased with increase in HMM density at constant ATP, and increased with increase in ATP concentration at constant HMM density. Using density of HMM molecules and length of actin, we estimated the number of HMM molecules per actin filament (N) that participate in processive sliding of actin. N is solely a function of ATP concentration: 88 ± 24 and 54 ± 22 HMM molecules (mean ± S.D.) at 2 mM and 0.1 mM ATP respectively. Processive sliding of actin filament was observed only when N lay within a minimum lower limit (Nmin) and a maximum upper limit (Nmax) to the number of HMM molecules. When N < Nmin the actin filament diffused away from the surface and processivity was lost and when N > Nmax the filament underwent breakage eventually and could not sustain processive sliding. We postulate this maximum upper limit arises due to increased number of strongly bound myosin heads.

Mechanics of Vascular Smooth Muscle

Vascular smooth muscle (VSM; see Table 1 for a list of abbreviations) is a heterogeneous biomaterial comprised of cells and extracellular matrix. By surrounding tubes of endothelial cells, VSM forms a regulated network, the vasculature, through which oxygenated blood supplies specialized organs, permitting the development of large multicellular organisms. VSM cells, the engine of the vasculature, house a set of regulated nanomotors that permit rapid stress-development, sustained stress-maintenance and vessel constriction. Viscoelastic materials within, surrounding and attached to VSM cells, comprised largely of polymeric proteins with complex mechanical characteristics, assist the engine with countering loads imposed by the heart pump, and with control of relengthening after constriction. The complexity of this smart material can be reduced by classical mechanical studies combined with circuit modeling using spring and dashpot elements. Evaluation of the mechanical characteristics of VSM requires a more complete understanding of the mechanics and regulation of its biochemical parts, and ultimately, an understanding of how these parts work together to form the machinery of the vascular tree. Current molecular studies provide detailed mechanical data about single polymeric molecules, revealing viscoelasticity and plasticity at the protein domain level, the unique biological slip-catch bond, and a regulated two-step actomyosin power stroke. At the tissue level, new insight into acutely dynamic stress-strain behavior reveals smooth muscle to exhibit adaptive plasticity. At its core, physiology aims to describe the complex interactions of molecular systems, clarifying structure-function relationships and regulation of biological machines. The intent of this review is to provide a comprehensive presentation of one biomachine, VSM.

Historical perspective on heart function: the Frank-Starling Law

More than a century of research on the Frank-Starling Law has significantly advanced our knowledge about the working heart. The Frank-Starling Law mandates that the heart is able to match cardiac ejection to the dynamic changes occurring in ventricular filling and thereby regulates ventricular contraction and ejection. Significant efforts have been attempted to identify a common fundamental basis for the Frank-Starling heart and, although a unifying idea has still to come forth, there is mounting evidence of a direct relationship between length changes in individual constituents (cardiomyocytes) and their sensitivity to Ca²⁺ ions. As the Frank-Starling Law is a vital event for the healthy heart, it is of utmost importance to understand its mechanical basis in order to optimize and organize therapeutic strategies to rescue the failing human heart. The present review is a historic perspective on cardiac muscle function. We "revive" a century of scientific research on the heart's fundamental protein constituents (contractile proteins), to their assemblies in the muscle (the sarcomeres), culminating in a thorough overview of the several synergistically events that compose the Frank-Starling mechanism. It is the authors' personal beliefs that much can be gained by understanding the Frank-Starling relationship at the cellular and whole organ level, so that we can finally, in this century, tackle the pathophysiologic mechanisms underlying heart failure.

Force and number of myosin motors during muscle shortening and the coupling with the release of the ATP hydrolysis products

KEY POINTS

Muscle contraction is due to cyclical ATP-driven working strokes in the myosin motors while attached to the actin filament. Each working stroke is accompanied by the release of the hydrolysis products, orthophosphate and ADP. The rate of myosin-actin interactions increases with the increase in shortening velocity. We used fast half-sarcomere mechanics on skinned muscle fibres to determine the relation between shortening velocity and the number and strain of myosin motors and the effect of orthophosphate concentration. A model simulation of the myosin-actin reaction explains the results assuming that orthophosphate and then ADP are released with rates that increase as the motor progresses through the working stroke. The ADP release rate further increases by one order of magnitude with the rise of negative strain in the final motor conformation. These results provide the molecular explanation of the relation between the rate of energy liberation and shortening velocity during muscle contraction. The chemo-mechanical cycle of the myosin II--actin reaction in situ has been investigated in Ca(2+)-activated skinned fibres from rabbit psoas, by determining the number and strain (s) of myosin motors interacting during steady shortening at different velocities (V) and the effect of raising inorganic phosphate (Pi) concentration. It was found that in control conditions (no added Pi ), shortening at V ≤ 350 nm s(-1) per half-sarcomere, corresponding to force (T) greater than half the isometric force (T0 ), decreases the number of myosin motors in proportion to the reduction of T, so that s remains practically constant and similar to the T0 value independent of V. At higher V the number of motors decreases less than in proportion to T, so that s progressively decreases. Raising Pi concentration by 10 mM, which reduces T0 and the number of motors by 40-50%, does not influence the dependence on V of number and strain. A model simulation of the myosin-actin reaction in which the structural transitions responsible for the myosin working stroke and the release of the hydrolysis products are orthogonal explains the results assuming that Pi and then ADP are released with rates that increase as the motor progresses through the working stroke. The rate of ADP release from the conformation at the end of the working stroke is also strain-sensitive, further increasing by one order of magnitude within a few nanometres of negative strain. These results provide the molecular explanation of the relation between the rate of energy liberation and the load during muscle contraction.

Using baculovirus/insect cell expressed recombinant actin to study the molecular pathogenesis of HCM caused by actin mutation A331P

Recombinant WT human cardiac actin (WT actin) was expressed using the baculovirus/insect cell expression system, purified, and used to reconstitute the thin-filament of bovine cardiac muscle fibers, together with bovine cardiac tropomyosin (Tm) and troponin (Tn). Effects of [Ca(2+)], [ATP], [phosphate] and [ADP] on tension and tension transients were studied at 25°C by using sinusoidal analysis, and the results were compared with those of native fibers and fibers reconstituted with purified bovine cardiac actin (BVC actin). In actin filament reconstituted fibers (without Tm/Tn), those reconstituted with WT actin showed exactly the same active tension as those reconstituted with purified BVC actin (WT: 0.75±0.06 T0, N=11; BVC: 0.73±0.07 T0, N=12, where T0 is the tension of original fibers before extraction). After Tm/Tn reconstitution, fibers reconstituted with WT actin generated 0.85±0.06 T0 (N=11) compared to 0.98±0.04 T0 (N=12) recovered by those reconstituted with BVC actin. In the presence of Tm/Tn, WT actin reconstituted fibers showed exactly the same Ca(2+) sensitivity as those of the native fibers and BVC actin reconstituted fibers (pCa50: native fibers: 5.69±0.01, N=10; WT: 5.69±0.02, N=11; BVC: 5.68±0.02, N=12). Sinusoidal analysis showed that the cross-bridge kinetics were the same among native fibers, BVC actin reconstituted fibers and WT actin reconstituted fibers, followed by reconstitution of Tm/Tn. These results demonstrate that baculovirus/insect cell expressed actin has no significant differences from tissue purified actin and can be used for thin-filament reconstitution assays. One hypertrophic cardiomyopathy (HCM) causing actin mutant A331P actin was also expressed and studied similarly, and the results were compared to those of the WT actin. In the reconstituted fibers, A331P significantly decreased the tension both in the absence of Tm/Tn (0.55±0.03 T0, N=13) and in their presence (0.65±0.02 T0, N=13) compared to those of the WT (0.75±0.06 T0 and 0.85±0.06 T0, respectively, N=11). A331P also showed decreased pCa50 (5.57±0.03, N=13) compared to that of WT (5.69±0.02, N=11). The cross-bridge kinetics and its distribution were similar between WT and A331P actin reconstituted fibers, indicating that force/cross-bridge was decreased by A331P. In conclusion, A331P causes a weakened cross-bridge force, which leads to a decreased active tension, reduces left-ventricular ejection fraction, and eventually results in the HCM phenotype.

Low-force transitions in single titin molecules reflect a memory of contractile history

Titin is a giant elastomeric muscle protein that has been suggested to function as a sensor of sarcomeric stress and strain, but the mechanisms by which it does so are unresolved. To gain insight into its mechanosensory function we manipulated single titin molecules with high-resolution optical tweezers. Discrete, step-wise transitions, with rates faster than canonical Ig domain unfolding occurred during stretch at forces as low as 5 pN. Multiple mechanisms and molecular regions (PEVK, proximal tandem-Ig, N2A) are likely to be involved. The pattern of transitions is sensitive to the history of contractile events. Monte-Carlo simulations of our experimental results predicted that structural transitions begin before the complete extension of the PEVK domain. High-resolution atomic force microscopy (AFM) supported this prediction. Addition of glutamate-rich PEVK domain fragments competitively inhibited the viscoelastic response in both single titin molecules and muscle fibers, indicating that PEVK domain interactions contribute significantly to sarcomere mechanics. Thus, under non-equilibrium conditions across the physiological force range, titin extends by a complex pattern of history-dependent discrete conformational transitions, which, by dynamically exposing ligand-binding sites, could set the stage for the biochemical sensing of the mechanical status of the sarcomere.

The working stroke of the myosin II motor in muscle is not tightly coupled to release of orthophosphate from its active site

Skeletal muscle shortens faster against a lower load. This force-velocity relationship is the fundamental determinant of muscle performance in vivo and is due to ATP-driven working strokes of myosin II motors, during their cyclic interactions with the actin filament in each half-sarcomere. Crystallographic studies suggest that the working stroke is associated with the release of phosphate (Pi) and consists of 70 deg tilting of a light-chain domain that connects the catalytic domain of the myosin motor to the myosin tail and filament. However, the coupling of the working stroke with Pi release is still an unsolved question. Using nanometre-microsecond mechanics on skinned muscle fibres, we impose stepwise drops in force on an otherwise isometric contraction and record the isotonic velocity transient, to measure the mechanical manifestation of the working stroke of myosin motors and the rate of its regeneration in relation to the half-sarcomere load and [Pi]. We show that the rate constant of the working stroke is unaffected by [Pi], while the subsequent transition to steady velocity shortening is accelerated. We propose a new chemo-mechanical model that reproduces the transient and steady state responses by assuming that: (i) the release of Pi from the catalytic site of a myosin motor can occur at any stage of the working stroke, and (ii) a myosin motor, in an intermediate state of the working stroke, can slip to the next actin monomer during filament sliding. This model explains the efficient action of muscle molecular motors working as an ensemble in the half-sarcomere.

Nano-storage wires

We report the development of "nano-storage wires" (NSWs), which can store chemical species and release them at a desired moment via external electrical stimuli. Here, using the electrodeposition process through an anodized aluminum oxide template, we fabricated multisegmented nanowires composed of a polypyrrole segment containing adenosine triphosphate (ATP) molecules, a ferromagnetic nickel segment, and a conductive gold segment. Upon the application of a negative bias voltage, the NSWs released ATP molecules for the control of motor protein activities. Furthermore, NSWs can be printed onto various substrates including flexible or three-dimensional structured substrates by direct writing or magnetic manipulation strategies to build versatile chemical storage devices. Since our strategy provides a means to store and release chemical species in a controlled manner, it should open up various applications such as drug delivery systems and biochips for the controlled release of chemicals.

Comparison of orientation and rotational motion of skeletal muscle cross-bridges containing phosphorylated and dephosphorylated myosin regulatory light chain

Calcium binding to thin filaments is a major element controlling active force generation in striated muscles. Recent evidence suggests that processes other than Ca(2+) binding, such as phosphorylation of myosin regulatory light chain (RLC) also controls contraction of vertebrate striated muscle (Cooke, R. (2011) Biophys. Rev. 3, 33-45). Electron paramagnetic resonance (EPR) studies using nucleotide analog spin label probes showed that dephosphorylated myosin heads are highly ordered in the relaxed fibers and have very low ATPase activity. This ordered structure of myosin cross-bridges disappears with the phosphorylation of RLC (Stewart, M. (2010) Proc. Natl. Acad. Sci. U.S.A. 107, 430-435). The slower ATPase activity in the dephosporylated moiety has been defined as a new super-relaxed state (SRX). It can be observed in both skeletal and cardiac muscle fibers (Hooijman, P., Stewart, M. A., and Cooke, R. (2011) Biophys. J. 100, 1969-1976). Given the importance of the finding that suggests a novel pathway of regulation of skeletal muscle, we aim to examine the effects of phosphorylation on cross-bridge orientation and rotational motion. We find that: (i) relaxed cross-bridges, but not active ones, are statistically better ordered in muscle where the RLC is dephosporylated compared with phosphorylated RLC; (ii) relaxed phosphorylated and dephosphorylated cross-bridges rotate equally slowly; and (iii) active phosphorylated cross-bridges rotate considerably faster than dephosphorylated ones during isometric contraction but the duty cycle remained the same, suggesting that both phosphorylated and dephosphorylated muscles develop the same isometric tension at full Ca(2+) saturation. A simple theory was developed to account for this fact.

A chemist and biologist talk to each other about caged neurotransmitters

Caged compounds are small organic molecules that can be photoactivated with brief pulses of light. They are widely used to study a great variety of biological processes by physiologists, cell biologists and neuroscientists. Initially made and invented by biologists in the late 1970s, they are now made mostly by chemists, often without any dialogue with the end users, the biologists. The idea for this review is to stimulate interaction between the two communities to further the creative development and application of these powerful optical probes.

Stretch of contracting cardiac muscle abruptly decreases the rate of phosphate release at high and low calcium

The contractile performance of the heart is linked to the energy that is available to it. Yet, the heart needs to respond quickly to changing demands. During diastole, the heart fills with blood and the heart chambers expand. Upon activation, contraction of cardiac muscle expels blood into the circulation. Early in systole, parts of the left ventricle are being stretched by incoming blood, before contraction causes shrinking of the ventricle. We explore here the effect of stretch of contracting permeabilized cardiac trabeculae of the rat on the rate of inorganic phosphate (P(i)) release resulting from ATP hydrolysis, using a fluorescent sensor for P(i) with millisecond time resolution. Stretch immediately reduces the rate of P(i) release, an effect observed both at full calcium activation (32 μmol/liter of Ca(2+)), and at a physiological activation level of 1 μmol/liter of Ca(2+). The results suggest that stretch redistributes the actomyosin cross-bridges toward their P(i)-containing state. The redistribution means that a greater fraction of cross-bridges will be poised to rapidly produce a force-generating transition and movement, compared with cross-bridges that have not been subjected to stretch. At the same time stretch modifies the P(i) balance in the cytoplasm, which may act as a cytoplasmic signal for energy turnover.

ATP binding and cross-bridge detachment steps during full Ca²⁺ activation: comparison of myofibril and muscle fibre mechanics by sinusoidal analysis

Single myofibrils 50–60 μm length and 2–3 μm diameter were isolated from rabbit psoas muscle fibres, and cross-bridge kinetics were studied by small perturbations of the length (∼0.2%) over a range of 15 frequencies (1–250 Hz). The experiments were performed at 15◦C in the presence of 0.05–10 mM MgATP, 8mM phosphate (Pi), 200 mM ionic strength with KAc (acetate), pCa 4.35–4.65, and pH 7.0. Two exponential processes, B and C, were resolved in tension transients. Their apparent rate constants (2πb and 2πc) increased as the [MgATP] was raised from 0.05 mM to 1mM, and then reached saturation at [MgATP] ≥ 1. Given that these rate constants were similar (c/b ∼1.7) at [Pi] ≥ 4 mM, they were combined to achieve an accurate estimate of the kinetic constants: their sum and product were analysed as functions of [MgATP]. These analyses yielded K1 =2.91 ± 0.31 mM −1, k2 =288 ± 36 s−1, and k−2 =10 ± 21 s−1 (±95% confidence limit, n =13 preparations), based on the cross-bridge model: AM+ATP ↔ (step 1) AM.ATP ↔ (step 2) A+M.ATP, where K1 is the ATP association constant (step 1), k2 is the rate constant of the cross-bridge detachment (step 2), and k−2 is the rate constant of its reversal step. These kinetic constants are respectively comparable to those observed in single fibres from rabbit psoas (K1 =2.35 ± 0.31 mM −1, k2 =243 ± 22 s−1, and k−2 =6 ± 14 s−1; n =8 preparations) when analysed by the same methods and under the same experimental conditions. These values are respectively not significantly different from those obtained in myofibrils, indicating that the same kinetic constants can be deduced from myofibril and muscle fibre studies, in terms of ATP binding and cross-bridge detachments steps. The fact that K1 in myofibrils is 1.2 times that in fibres (P≈0.05) may be explained by a small concentration gradient of ATP, ADP and/or Pi in single fibres.

Mesoscopic analysis of motion and conformation of cross-bridges

The orientation of a cross-bridge is widely used as a parameter in determining the state of muscle. The conventional measurements of orientation, such as that made by wide-field fluorescence microscopy, electron paramagnetic resonance (EPR) or X-ray diffraction or scattering, report the average orientation of 10¹²-10⁹ myosin cross-bridges. Under conditions where all the cross-bridges are immobile and assume the same orientation, for example in normal skeletal muscle in rigor, it is possible to determine the average orientation from such global measurements. But in actively contracting muscle, where a parameter indicating orientation fluctuates in time, the measurements of the average value provide no information about cross-bridge kinetics. To avoid problems associated with averaging information from trillions of cross-bridges, it is necessary to decrease the number of observed cross-bridges to a mesoscopic value (i.e. the value affected by fluctuations around the average). In such mesoscopic regimes, the averaging of the signal is minimal and dynamic behavior can be examined in great detail. Examples of mesoscopic analysis on skeletal and cardiac muscle are provided.

An integrated in vitro and in situ study of kinetics of myosin II from frog skeletal muscle

A new efficient protocol for extraction and conservation of myosin II from frog skeletal muscle made it possible to preserve the myosin functionality for a week and apply single molecule techniques to the molecular motor that has been best characterized for its mechanical, structural and energetic parameters in situ.With the in vitro motility assay, we estimated the sliding velocity of actin on frog myosin II (VF) and its modulation by pH, myosin density, temperature (range 4-30◦C) and substrate concentration. VF was 8.88 ± 0.26 μms⁻¹ at 30.6◦C and decreased to 1.60 ± 0.09 μms⁻¹ at 4.5◦C. The in vitro mechanical and kinetic parameters were integrated with the in situ parameters of frog muscle myosin working in arrays in each half-sarcomere. By comparing VF with the shortening velocities determined in intact frog muscle fibres under different loads and their dependence on temperature, we found that VF is 40-50% less than the fibre unloaded shortening velocity (V0) at the same temperature and we determined the load that explains the reduced value of VF. With this integrated approach we could define fundamental kinetic steps of the acto-myosin ATPase cycle in situ and their relation with mechanical steps. In particular we found that at 5◦C the rate of ADP release calculated using the step size estimated from in situ experiments accounts for the rate of detachment of motors during steady shortening under low loads.

Correlation between cross-bridge kinetics obtained from Trp fluorescence of myofibril suspensions and mechanical studies of single muscle fibers in rabbit psoas

Our goal is to correlate kinetic constants obtained from fluorescence studies of myofibril suspension with those from mechanical studies of skinned muscle fibers from rabbit psoas. In myofibril studies, the stopped-flow technique with tryptophan fluorescence was used; in muscle fiber studies, tension transients with small amplitude sinusoidal length perturbations were used. All experiments were performed using the equivalent solution conditions (200 mM ionic strength, pH 7.00) at 10°C. The concentration of MgATP was varied to characterize kinetic constants of the ATP binding step 1 (K (1): dissociation constant), the binding induced cross-bridge detachment step 2 (k (2), k (-2): rate constants), and the ATP cleavage step 3 (k (3), k (-3)). In myofibrils we found that K (1) = 0.52 ± 0.08 mM (±95% confidence limits), k (2) = 242 ± 24 s(-1), and k (-2) ≈ 0; in muscle fibers, K (1) = 0.46 ± 0.06 mM, k (2) = 286 ± 32 s(-1), and k (-2) = 57 ± 21 s(-1). From these results, we conclude that myofibrils and muscle fibers exhibit nearly equal ATP binding step, and nearly equal ATP binding induced cross-bridge detachment step. Consequently, there is a good correlation between process C (phase 2 of step analysis) and the cross-bridge detachment step. The reverse detachment step is finite in fibers, but almost absent in myofibrils. We further studied partially cross-linked myofibrils and found little change in steps 2 and 3, indicating that cross-linking does not affect these steps. However, we found that K (1) is 2.5× of native myofibrils, indicating that MgATP binding is weakened by the presence of the extra load. We further studied the phosphate (Pi) effect in myofibrils, and found that Pi is a competitive inhibitor of MgATP, with the inhibitory dissociation constant of ~9 mM. Similar results were also deduced from fiber studies. To characterize the ATP cleavage step in myofibrils, we measured the slow rate constant in fluorescence, and found that k (3) + k (-3) = 16 ± 1 s(-1).

Crossbridge mechanism(s) examined by temperature perturbation studies on muscle

An overall view of the contractile process that has emerged from -temperature-studies on active muscle is outlined. In isometric muscle, a small rapid temperature-jump (T-jump) enhances an early, pre-phosphate release, step in the acto-myosin (crossbridge) ATPase cycle and induces a characteristic rise in force indicating that crossbridge force generation is endothermic (force rises when heat is absorbed). Sigmoidal temperature dependence of steady force is largely due to the endothermic nature of force generation. During shortening, when muscle force is decreased, the T-jump force generation is enhanced; conversely, when a muscle is lengthening and its force increased, the T-jump force generation is inhibited. Taking T-jump force generation as a signature of the crossbridge - ATPase cycle, the results suggest that during lengthening the ATPase cycle is truncated before endothermic force generation, whereas during shortening this step and the ATPase cycle, are accelerated; this readily provides a molecular basis for the Fenn effect.

Force and power generating mechanism(s) in active muscle as revealed from temperature perturbation studies

The basic characteristics of the process of force and power generation in active muscle that have emerged from temperature studies are examined. This is done by reviewing complementary findings from temperature-dependence studies and rapid temperature-jump (T-jump) experiments and from intact and skinned fast mammalian muscle fibres. In isometric muscle, a small T-jump leads to a characteristic rise in force showing that crossbridge force generation is endothermic (heat absorbed) and associated with increased entropy (disorder). The sensitivity of the T-jump force generation to added inorganic phosphate (Pi) indicates that a T-jump enhances an early step in the actomyosin (crossbridge) ATPase cycle before Pi-release. During muscle lengthening when steady force is increased, the T-jump force generation is inhibited. Conversely, during shortening when steady force is decreased, the T-jump force generation is enhanced in a velocity-dependent manner, showing that T-jump force generation is strain sensitive. Within the temperature range of ∼5–35◦C, the temperature dependence of steady active force is sigmoidal both in isometric and in shortening muscle. However, in shortening muscle, the endothermic character of force generation becomes more pronounced with increased velocity and this can, at least partly, account for the marked increase with warming of the mechanical power output of active muscle.

Time-Resolved Structural Studies on Insect Flight Muscle after Photolysis of Caged-ATP

The time course of structural changes occurring on ATP-induced relaxation of glycerinated insect flight muscle from the rigor state has been investigated using synchrotron radiation as a source of high intensity x rays and photolysis of caged-ATP to produce a rapid rise in ATP concentration. Temporal resolutions of 1 ms for the strongest equatorial reflections and 5 ms for the 14.5 nm meridional reflection are attainable from single events (i.e., without averaging over several cycles). The equatorial intensity changes completely, the meridional intensity partially, towards their respective relaxed values on a much faster time scale than relaxation of tension. The results suggest that actively cycling bridges present shortly after ATP-release are either too few in number to be detected in the equatorial diffraction pattern or that their structure is different from that of rigor bridges.

Regulation of fibre contraction in a rat model of myocardial ischemia

Background

The changes in the actomyosin crossbridge cycle underlying altered contractility of the heart are not well described, despite their importance to devising rational treatment approaches.

Methodology/Principal Findings

A rat ischemia–reperfusion model was used to determine the transitions of the crossbridge cycle impacted during ischemia. Compared to perfused hearts, the maximum force per cross-sectional area and Ca²⁺ sensitivity of fibers from ischemic hearts were both reduced. Muscle activation by photolytic release of Ca²⁺ and ATP suggested that the altered contractility was best described as a reduction in the rate of activation of noncycling actomyosin crossbridges to activated, cycling states. More specifically, the apparent forward rate constant of the transition between the nonforce bearing A-M.ADP.Pi state and the bound, force bearing AM*.ADP.Pi state was reduced in ischemic fibers, suggesting that this transition is commensurate with initial crossbridge activation. These results suggested an alteration in the relationship between the activation of thin filament regulatory units and initial crossbridge attachment, prompting an examination of the post-translational state of troponin (Tn) T and I. These analyses indicated a reduction in the diphosphorylated form of TnT during ischemia, along with lower Ser23/24 phosphorylation of TnI. Treatment of perfused fibers by 8-Br-cAMP increased Ser23/24 phosphorylation of TnI, altering the reverse rate constant of the Pi isomerization in a manner consistent with the lusitropic effect of β-adrenergic stimulation. However, similar treatment of ischemic fibers did not change TnI phosphorylation or the kinetics of the Pi isomerization.

Conclusions

Ischemia reduces the isomerization from A-M.ADP.Pi to AM*.ADP.Pi, altering the kinetics of crossbridge activation through a mechanism that may be mediated by altered TnT and TnI phosphorylation.

Nebulin plays a direct role in promoting strong actin-myosin interactions

The role of the actin filament-associated protein nebulin on mechanical and kinetic properties of the actomyosin motor was investigated in skeletal muscle of wild-type (wt) and nebulin-deficient (nebulin(-)(/)(-)) mice that were 1 d old, an age at which sarcomeric structure is still well preserved. In Ca2+-activated skinned fibers from psoas muscle, we determined the Ca2+ dependence of isometric force and stiffness, the rate of force redevelopment after unloaded shortening (k(TR)), the power during isotonic shortening, and the unloaded shortening velocity (V(0)). Our results show a 65% reduction in isometric force in nebulin(-)(/)(-) fibers at saturating [Ca2+], whereas neither thin-filament length nor the Ca2+ sensitivity of the contractile system is affected. Stiffness measurements indicate that the reduction in isometric force is due to a reduction in the number of actin-attached myosin motors, whereas the force of the motor is unchanged. Furthermore, in nebulin(-)(/)(-) fibers, k(TR) is decreased by 57%, V(0) is increased by 63%, and the maximum power is decreased by 80%. These results indicate that, in the absence of nebulin, the attachment probability of the myosin motors to actin is decreased, revealing a direct role for nebulin in promoting strong actomyosin interactions responsible for force and power production.

Phosphorylation of tropomyosin extends cooperative binding of myosin beyond a single regulatory unit

Tropomyosin (Tm) is one of the major phosphoproteins comprising the thin filament of muscle. However, the specific role of Tm phosphorylation in modulating the mechanics of actomyosin interaction has not been determined. Here we show that Tm phosphorylation is necessary for long-range cooperative activation of myosin binding. We used a novel optical trapping assay to measure the isometric stall force of an ensemble of myosin molecules moving actin filaments reconstituted with either natively phosphorylated or dephosphorylated Tm. The data show that the thin filament is cooperatively activated by myosin across regulatory units when Tm is phosphorylated. When Tm is dephosphorylated, this "long-range" cooperative activation is lost and the filament behaves identically to bare actin filaments. However, these effects are not due to dissociation of dephosphorylated Tm from the reconstituted thin filament. The data suggest that end-to-end interactions of adjacent Tm molecules are strengthened when Tm is phosphorylated, and that phosphorylation is thus essential for long range cooperative activation along the thin filament.

Molecular basis of the catch state in molluscan smooth muscles: a catchy challenge

The catch state (or 'catch') of molluscan smooth muscles is a passive holding state that occurs after cessation of stimulation. During catch, force and, in particular, resistance to stretch are maintained for long time periods with low (or no) energy consumption at basal intracellular free [Ca2+]. The catch state is initiated by Ca2+-stimulated dephosphorylation of the titin-like protein twitchin and is inhibited by cAMP-dependent phosphorylation of twitchin. In addition, catch is pH sensitive, but the reason for this is unknown. According to a traditional model, catch is due to slower cross-bridge cycles where myosin heads remain longer attached to the actin filaments after force generation, possibly caused by a hindered release of ADP from the myosin heads. However, this model was disproved by recent findings which showed that (i) inhibitors of myosin function, such as vanadate, do not affect catch force; (ii) factors which terminate the catch state do not accelerate myosin head detachment kinetics and (iii) a catch-like high resistance to stretch is still inducible when force development is prevented. Thus, catch probably involves passive linkage structures interconnecting the myofilaments (catch linkages). For example twitchin could (i) tie myosin heads to the thin filaments, (ii) mechanically lock them in a stretch resistant state or (iii) interconnect thick and thin filaments directly. However, it is questionable if these mechanisms are sufficient since twitchin seems to be about 15-times less abundant than myosin. Therefore, in addition, interconnections between thick filaments could exist, which could involve e.g. paramyosin or twitchin. Catch could even involve changes in the compliance of thick filaments. The function of myorod, found specifically in catch muscles in equal abundance with myosin, is not known. The suggestion is made here that catch linkages are present already during active contraction either as ratchet-like elements resisting stretch and not opposing shortening or in some kind of 'standby' mode ready to transform suddenly into the working mode by stretches or after Ca2+ removal following cessation of stimulation.

Studies of RyR function in situ

The ryanodine receptors (RyRs) are intracellular Ca2+ release channels of the sarcoplasmic reticulum (SR) involved in many cellular responses, including muscle excitation-contraction coupling. Multiple biochemical and biophysical methods are available to study RyR functions. However, most of them are somewhat limited because they can only be used to examine channels which are purified from the SR and no longer in their natural environment. In this review we discuss optical methods for studying RyR functions in situ. We describe several techniques for the investigation of local (microscopic) intracellular Ca2+ signals (a.k.a Ca2+ sparks) by means of confocal microscopy and flash photolysis of caged compounds. We discuss how these studies can and will continue to contribute to our understanding of RyR function in physiological and pathological conditions.

Effect of inorganic phosphate on the force and number of myosin cross-bridges during the isometric contraction of permeabilized muscle fibers from rabbit psoas

The relation between the chemical and mechanical steps of the myosin-actin ATPase reaction that leads to generation of isometric force in fast skeletal muscle was investigated in demembranated fibers of rabbit psoas muscle by determining the effect of the concentration of inorganic phosphate (Pi) on the stiffness of the half-sarcomere (hs) during transient and steady-state conditions of the isometric contraction (temperature 12 degrees C, sarcomere length 2.5 mum). Changes in the hs strain were measured by imposing length steps or small 4 kHz oscillations on the fibers in control solution (without added Pi) and in solution with 3-20 mM added Pi. At the plateau of the isometric contraction in control solution, the hs stiffness is 22.8 +/- 1.1 kPa nm(-1). Taking the filament compliance into account, the total stiffness of the array of myosin cross-bridges in the hs (e) is 40.7 +/- 3.7 kPa nm(-1). An increase in [Pi] decreases the stiffness of the cross-bridge array in proportion to the isometric force, indicating that the force of the cross-bridge remains constant independently of [Pi]. The rate constant of isometric force development after a period of unloaded shortening (r(F)) is 23.5 +/- 1.0 s(-1) in control solution and increases monotonically with [Pi], attaining a maximum value of 48.6 +/- 0.9 s(-1) at 20 mM [Pi], in agreement with the idea that Pi release is a relatively fast step after force generation by the myosin cross-bridge. During isometric force development at any [Pi], e and thus the number of attached cross-bridges increase in proportion to the force, indicating that, independently of the speed of the process that leads to myosin attachment to actin, there is no significant (>1 ms) delay between generation of stiffness and generation of force by the cross-bridges.

Force transients and minimum cross-bridge models in muscular contraction

Two- and three-state cross-bridge models are considered and examined with respect to their ability to predict three distinct phases of the force transients that occur in response to step change in muscle fiber length. Particular attention is paid to satisfying the Le Châtelier-Brown Principle. This analysis shows that the two-state model can account for phases 1 and 2 of a force transient, but is barely adequate to account for phase 3 (delayed force) unless a stretch results in a sudden increase in the number of cross-bridges in the detached state. The three-state model (A-->B-->C-->A) makes it possible to account for all three phases if we assume that the A-->B transition is fast (corresponding to phase 2), the B-->A transition is of intermediate speed (corresponding to phase 3), and the C-->A transition is slow; in such a scenario, states A and C can support or generate force (high force states) but state B cannot (detached, or low-force state). This model involves at least one ratchet mechanism. In this model, force can be generated by either of two transitions: B-->A or B-->C. To determine which of these is the major force-generating step that consumes ATP and transduces energy, we examine the effects of ATP, ADP, and phosphate (Pi) on force transients. In doing so, we demonstrate that the fast transition (phase 2) is associated with the nucleotide-binding step, and that the intermediate-speed transition (phase 3) is associated with the Pi-release step. To account for all the effects of ligands, it is necessary to expand the three-state model into a six-state model that includes three ligand-bound states. The slowest phase of a force transient (phase 4) cannot be explained by any of the models described unless an additional mechanism is introduced. Here we suggest a role of series compliance to account for this phase, and propose a model that correlates the slowest step of the cross-bridge cycle (transition C-->A) to: phase 4 of step analysis, the rate constant k(tr) of the quick-release and restretch experiment, and the rate constant k(act) for force development time course following Ca(2+) activation.

Use of thin filament reconstituted muscle fibres to probe the mechanism of force generation

The technique of selective removal of the thin filament by gelsolin in bovine cardiac muscle fibres, and reconstitution of the thin filament from isolated proteins is reviewed, and papers that used reconstituted preparations are discussed. By comparing the results obtained in the absence/presence of regulatory proteins tropomyosin (Tm) and troponin (Tn), it is concluded that the role of Tm and Tn in force generation is not only to expose the binding site of actin to myosin, but also to modify actin for better stereospecific and hydrophobic interaction with myosin. This conclusion is further supported by experiments that used a truncated Tm mutant and the temperature study of reconstituted fibres. The conclusion is consistent with the hypothesis that there are three states in the thin filament: blocked state, closed state, and open state. Tm is the major player to produce these effects, with Tn playing the role of Ca2+ sensing and signal transmission mechanism. Experiments that changed the number of negative charges at the N-terminal finger of actin demonstrates that this part of actin is essential to promote the strong interaction between actin and myosin molecules, in addition to the well-known weak interaction that positions the myosin head at the active site of actin prior to force generation.

Effect of pH on the rate of myosin head detachment in molluscan catch muscle: are myosin heads involved in the catch state?

Moderate alkalisation is known to terminate the catch state of bivalve mollusc smooth muscles such as the anterior byssus retractor muscle (ABRM) of Mytilus edulis L. In the present study, we investigated the effect of moderate alkalisation (pH 7.2-7.7 vs control pH 6.7) on the myosin head detachment rate in saponin-skinned fibre bundles of ABRM in order to investigate the possible role of myosin heads in the force maintenance during catch. The detachment rate of myosin heads was deduced from two types of experiments. (1) In stretch experiments on maximally Ca2+-activated fibre bundles (pCa 4.5), the rate of force decay after stepwise stretch was assessed. (2) In ATP step experiments, the rate of force decay from high force rigor (pCa>8) was evaluated. The ATP step was induced by photolysis of caged ATP. We found that moderate alkalisation induces relaxation of skinned fibres in catch, thereby reducing both force and stiffness, whereas it does not accelerate the rate of myosin head detachment. This acceleration, however, would be expected if catch would be simply due to myosin heads remaining sustainably attached to actin filaments. Thus, the myosin heads may be less involved in catch than generally assumed. Catch may possibly depend on a different kind of myofilament interconnections, which are abolished by moderate alkalisation.

Thin Filament Remodeling in Failing Myocardium

While the remodeling process in myocardial failure involves changes in ventricular structure and performance, it is now appreciated that it is also associated with changes in thin filament composition and function. As is discussed, changes at the level thick filament may affect thin filament activation in heart failure. Alterations in actin, troponin and tropomyosin isoform composition do not appear to be significant factors in human heart failure. In contrast, proteolytic degradation of troponin subunits are likely to be playing a functional role in some forms of cardiomyopathy (e.g. ischemic). Finally, phosphorylation of troponin I and troponin T by kinases (most notably protein kinase C) substantially affect thin filament function in failing human myocardium. These findings indicate that functional deficits in thin filament function in failing myocardium are largely reversible and create the potential for future targeted therapies in the treatment of this deadly disease.

Endothermic force generation, temperature-jump experiments and effects of increased [MgADP] in rabbit psoas muscle fibres

We studied, by experiment and by kinetic modelling, the characteristics of the force increase on heating (endothermic force) in muscle. Experiments were done on maximally Ca2+-activated, permeabilized, single fibres (length approximately 2 mm; sarcomere length, 2.5 microm) from rabbit psoas muscle; [MgATP] was 4.6 mM, pH 7.1 and ionic strength was 200 mM. A small-amplitude (approximately 3 degrees C) rapid laser temperature-jump (0.2 ms T-jump) at 8-9 degrees C induced a tension rise to a new steady state and it consisted of two (fast and slow) exponential components. The T-jump-induced tension rise became slower as [MgADP] was increased, with half-maximal effect at 0.5 mM [MgADP]; the pre- and post-T-jump tension increased approximately 20% with 4 mM added [MgADP]. As determined by the tension change to small, rapid length steps (<1.4%L0 complete in <0.5 ms), the increase of force by [MgADP] was not associated with a concomitant increase of stiffness; the quick tension recovery after length steps (Huxley-Simmons phase 2) was slower with added MgADP. In steady-state experiments, the tension was larger at higher temperatures and the plot of tension versus reciprocal absolute temperature was sigmoidal, with a half-maximal tension at 10-12 degrees C; the relation with added 4 mM MgADP was shifted upwards on the tension axis and towards lower temperatures. The potentiation of tension with 4 mM added MgADP was 20-25% at low temperatures (approximately 5-10 degrees C), but approximately 10% at the physiological temperatures (approximately 30 degrees C). The shortening velocity was decreased with increased [MgADP] at low and high temperatures. The sigmoidal relation between tension and reciprocal temperature, and the basic effects of increased [MgADP] on endothermic force, can be qualitatively simulated using a five-step kinetic scheme for the crossbridge/A-MATPase cycle where the force generating conformational change occurs in a reversible step before the release of inorganic phosphate (P(i)), it is temperature sensitive (Q10 of approximately 4) and the release of MgADP occurs by a subsequent, slower, two-step mechanism. Modelling shows that the sigmoidal relation between force and reciprocal temperature arises from conversion of preforce-generating (A-M.ADP.P(i)) states to force-bearing (A-M.ADP) states as the temperature is raised. A tension response to a simulated T-jump consists of three (one fast and two slow) components, but, by combining the two slow components, they could be reduced to two; their relative amplitudes vary with temperature. The model can qualitatively simulate features of the tension responses induced by large-T-jumps from low starting temperatures, and those induced by small-T-jumps from different starting temperatures and, also, the interactive effects of P(i) and temperature on force in muscle fibres.

No effect of twitchin phosphorylation on the rate of myosin head detachment in molluscan catch muscle: are myosin heads involved in the catch state?

Phosphorylation of twitchin is known to abolish the catch state of anterior byssus retractor muscle (ABRM) of the bivalve mollusc Mytilus edulis. To investigate the role of myosin head involvement in force maintenance during catch, the effect of twitchin phosphorylation on myosin head detachment was studied in saponin-skinned fibre bundles of ABRM. The detachment rate of myosin heads was deduced from two types of experiments: (1) force decay after stepwise stretch of maximally Ca2+-activated fibre bundles (pCa 4.5) and (2) force decay from high-force rigor, the former induced by a stepwise increase in ATP concentration elicited by photolysis of caged ATP (pCa<8). The rate of detachment was not affected by thiophosphorylation or phosphorylation of twitchin by 0.12 mM cAMP in the presence of the phosphatase inhibitor cyclosporine A (1 microM). Conversely, measurements of the rate of stretch-induced delayed force increase (stretch activation) and of the force increase following an ATP step in low-force rigor (pCa 4.5) suggest that the rate of myosin head attachment decreases after twitchin phosphorylation. We conclude that catch is not due to myosin heads remaining attached to actin filaments, but depends on myofilament interconnections that break down when twitchin is phosphorylated.

Coupling between phosphate release and force generation in muscle actomyosin

Energetic, kinetic and oxygen exchange experiments in the mid-1980s and early 1990s suggested that phosphate (Pi) release from actomyosin-adenosine diphosphate Pi (AM.ADP.Pi) in muscle fibres is linked to force generation and that Pi release is reversible. The transition leading to the force-generating state and subsequent Pi release were hypothesized to be separate, but closely linked steps. Pi shortens single force-generating actomyosin interactions in an isometric optical clamp only if the conditions enable them to last 20-40 ms, enough time for Pi to dissociate. Until 2003, the available crystal forms of myosin suggested a rigid coupling between movement of switch II and tilting of the lever arm to generate force, but they did not explain the reciprocal affinity myosin has for actin and nucleotides. Newer crystal forms and other structural data suggest that closing of the actin-binding cleft opens switch I (presumably decreasing nucleotide affinity). These data are all consistent with the order of events suggested before: myosin.ADP.Pi binds weakly, then strongly to actin, generating force. Then Pi dissociates, possibly further increasing force or sliding.

Structural transients of contractile proteins upon sudden ATP liberation in skeletal muscle fibers

Structural changes of contractile proteins were examined by millisecond time-resolved two-dimensional x-ray diffraction recordings during relaxation of skinned skeletal muscle fibers from rigor after caged ATP photolysis. It is known that the initial dissociation of the rigor actomyosin complex is followed by a period of transient active contraction, which is markedly prolonged in the presence of ADP by a mechanism yet to be clarified. Both single-headed (overstretched muscle fibers with exogenous myosin subfragment-1) and two-headed (fibers with full filament overlap) preparations were used. Analyses of various actin-based layer line reflections from both specimens showed the following: 1), The dissociation of the rigor actomyosin complex was fast and only modestly decelerated by ADP and occurred in a single exponential manner without passing through any detectable transitory state. Its ADP sensitivity was greater in the two-headed preparation but fell short of explaining the large ADP effect on the transient active contraction. 2), The decay of the activated state of the thin filament followed the time course of tension more closely in an ADP-dependent manner. These results suggest that the interplay between the reattached active myosin heads and the thin filament is responsible for the prolonged active contraction in the presence of ADP.

Myosin regulatory light chain phosphorylation and strain modulate adenosine diphosphate release from smooth muscle Myosin

The effects of myosin regulatory light chain (RLC) phosphorylation and strain on adenosine diphosphate (ADP) release from cross-bridges in phasic (rabbit bladder (Rbl)) and tonic (femoral artery (Rfa)) smooth muscle were determined by monitoring fluorescence transients of the novel ADP analog, 3'-deac-eda-ADP (deac-edaADP). Fluorescence transients reporting release of 3'-deac-eda-ADP were significantly faster in phasic (0.57 +/- 0.06 s(-1)) than tonic (0.29 +/- 0.03 s(-1)) smooth muscles. Thiophosphorylation of regulatory light chains increased and strain decreased the release rate approximately twofold. The calculated (k-ADP/k+ADP) dissociation constant, Kd of unstrained, unphosphorylated cross-bridges for ADP was 0.6 microM for rabbit bladder and 0.3 microM for femoral artery. The rates of ADP release from rigor bridges and reported values of Pi release (corresponding to the steady-state adenosine triphosphatase (ATPase) rate of actomyosin (AM)) from cross-bridges during a maintained isometric contraction are similar, indicating that the ADP-release step or an isomerization preceding it may be limiting the adenosine triphosphatase rate. We conclude that the strain- and dephosphorylation-dependent high affinity for and slow ADP release from smooth muscle myosin prolongs the fraction of the duty cycle occupied by strongly bound actomyosin.ADP state(s) and contributes to the high economy of force.

Urinary bladder contraction and relaxation: physiology and pathophysiology

The detrusor smooth muscle is the main muscle component of the urinary bladder wall. Its ability to contract over a large length interval and to relax determines the bladder function during filling and micturition. These processes are regulated by several external nervous and hormonal control systems, and the detrusor contains multiple receptors and signaling pathways. Functional changes of the detrusor can be found in several clinically important conditions, e.g., lower urinary tract symptoms (LUTS) and bladder outlet obstruction. The aim of this review is to summarize and synthesize basic information and recent advances in the understanding of the properties of the detrusor smooth muscle, its contractile system, cellular signaling, membrane properties, and cellular receptors. Alterations in these systems in pathological conditions of the bladder wall are described, and some areas for future research are suggested.

Lower active force generation and improved fatigue resistance in skeletal muscle from desmin deficient mice

The mechanical effects of the intermediate filament protein desmin was examined in desmin deficient mice (Des-/-) and their wild type control (Des+/+). Active force generation was determined in intact soleus muscles and in skinned single fibres from soleus and psoas. A decreased force generation of skinned muscle fibres from Des-/- mice and a tendency towards decreased active force in intact soleus muscle were detected. Concentrations of the contractile protein actin and myosin were not altered in Des-/- muscles. Ca(2+)-sensitivity of skinned single fibres in Des-/- muscles was unchanged compared to Des+/+. Using a protocol with repeated short tetani an increased fatigue resistance was found in the intact soleus muscles from Des-/- mice. In conclusion, desmin intermediate filaments are required for optimal generation or transmission of active force in skeletal muscle. Although other studies have shown that the desmin intermediate filaments appear to influence Ca(2+)-handling, the Ca(2+)-sensitivity of the contractile filaments is not altered in skeletal muscle of Des-/- mice. Previous studies have reported a switch towards slower myosin isoforms in slow skeletal muscle of Des-/- mice. The increased fatigue resistance show that this change is reflected in the physiological function of the muscle.