Joint Gap Kinematics in Posterior-Stabilized Total Knee Arthroplasty Measured by a New Tensor With the Navigation System

Posterior capsular release around the intercondylar notch increases extension gap without affecting flexion gap in posterior-stabilized total knee arthroplasty

BACKGROUND

In posterior-stabilized (PS) total knee arthroplasty (TKA), joint extension gap decreases after placement of a femoral trial component which causes imbalance between the extension and flexion gaps. Previous studies have demonstrated that capsular release around the intercondylar notch can enlarge the extension gap; however, its impact on the flexion gap is unknown. This study assessed the effect of capsular release around the intercondylar notch on both extension and flexion gaps.

METHODS

This study included 100 patients who underwent PS-TKA, and capsular release was performed intraoperatively to avoid flexion contracture and to balance the extension-flexion gap. We measured the gap and tilting angle with a femoral trial using FuZion™ tensor, applying a joint distraction force of 40 lbs. The differences in gap and tilting angle were assessed before and after capsular release.

RESULTS

The mean center component gap (CG) before and after capsular release was 10.0 mm and 12.5 mm in extension (P < 0.001), 14.1 mm and 14.2 mm in flexion (P = 0.58), respectively. Calculated medial CG before and after capsular release was 9.2 mm and 11.4 mm in extension (P < 0.001), 12.6 mm and 12.7 mm in flexion (P = 0.20), respectively. The average medial CG difference significantly decreased from 3.4 mm to 1.3 mm after release.

CONCLUSION

This study confirmed that capsular release around the intercondylar notch significantly enlarges the extension component gap, while having an insignificant effect on the flexion component gap in PS-TKA.

Soft tissue elasticity in total knee arthroplasty: An in vivo quantitative analysis

BACKGROUND

Soft tissue balance is essential for total knee arthroplasty success. The elastic properties of soft tissues affect knee-joint stability and flexibility. This study proposed a novel methodology for in vivo quantitative analysis of soft tissue elasticity during total knee arthroplasty. In this study, we aimed to (1) establish a mathematical model to depict medial and lateral soft tissue elasticity, (2) report the individual differences and interindividual commonalities in soft tissue elasticity.

METHODS

A specifically designed knee tensor was used to evaluate soft tissue elasticity by dynamically applying sequential tensions to medial and lateral compartments while measuring knee joint gaps in both compartments. Measurements were performed on ten knees of six cadavers. Bivariate polynomial regression was used for analysis, and the equivalent elastic coefficient (N/mm) was calculated.

FINDINGS

Soft-tissue elasticity showed high individual differences. The equivalent elastic coefficient was larger in the medial compartment than in the lateral compartment, and the equivalent elastic coefficient of the lateral compartment gradually decreased while the medial equivalent elastic coefficient remained constant when the knee was flexed. The lateral gaps increased from 0.1 to 3.9 mm, and the medial gaps increased from 0 to 1.5 mm when the tension increased from 60 to 90 N. The shapes and distributions of the silkworm-like lattices in elasticity and balance evaluations are clinically relevant to knee balance.

INTERPRETATION

Soft-tissue balance in total knee arthroplasty is significantly affected by soft-tissue elasticity. An intraoperative quantitative analysis of elasticity helps to tail an individualized balancing target for total knee arthroplasty.

Establishing femoral component rotation using a dynamic tensioner does not improve patellar position after total knee replacement with use of anatomic implants: A case-control study

BACKGROUND

Anterior knee pain (AKP) is one of the reasons for dissatisfaction after total knee replacement (TKR). It may result from patellofemoral joint dysfunction, caused by improper rotation of implant components. The aim of this study was to analyze patella positioning in patients after standard measured resection TKR and TKR with a use of a dynamic tensioner, and to assess the frequency of AKP, range of motion (ROM), and patient-reported outcome measures 6 weeks and 3 months postoperatively.

METHODS

The study consisted of 127 patients who underwent TKR. Eighty-nine of them treated with use of the dynamic tensioner FUZION formed the study group; the remainder formed the control group. All participants received cemented PERSONA MC without patella resurfacing. All patients had a standard anteroposterior, lateral weight-bearing, long-leg view X-ray and computed tomography examination in 30° of knee flexion following the procedure.

RESULTS

There were no significant differences between the study and the control groups regarding: posterior condylar axis (PCA)-patella angle, surgical transepicondylar axis (sTEA)-patella angle, PCA-sTEA angle, deviation from 90° in PCA-patella, sTEA-patella and PCA-sTEA angles. No significant difference was found in a ratio of obtaining PCA-patella angle deviation of more than 3°. Regarding clinical parameters, statistically and questionablly clinically significant difference in favor of the Study Group was found in Forgotten Joint Score 6 weeks and 3 months post-operativley and ROM 6 weeks post-operatively. However, such difference was not found by analyzing ROM 3 months post-operatively, AKP and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) scores.

CONCLUSION

Compared with the standard 3° of femoral component external rotation, use of a dynamic tensioner does not allow for more accurate restoration of the patellar facet position with reference to the PCA.

The Impact of Patellar Position on Mediolateral Joint Gap in Cruciate-Retaining and Posterior-Stabilized Total Knee Arthroplasty: A Prospective Study

BACKGROUND

This prospective study aimed to investigate the influence of patellar position (ie, eversion, lateralization, and reduction) on medial and lateral gap measurements during total knee arthroplasty (TKA) in both cruciate-retaining (CR) and posterior-stabilized (PS) TKA designs.

METHODS

The present work analyzed 50 knees with primary osteoarthritis that underwent TKA between July and November 2019. Medial and lateral gaps were measured at different knee flexion angles (0°, 45°, 90°, and 120°) in 3 patellar positions after sequentially inserting CR type and PS type trial component in the same knee.

RESULTS

In CR TKA, medial gaps in patellar reduction showed significantly smaller gaps at 90° and 120° of knee flexion compared to those in eversion and lateralization (P < .001). Lateral gaps in patellar reduction were also significantly larger than those in eversion and lateralization (P < .001). The mediolateral gap difference in patellar reduction was significantly greater at all flexion angles compared to those in eversion and lateralization (P < .001). In PS TKA, similar patterns were observed for medial gaps, lateral gaps, and mediolateral gap differences (P < .001).

CONCLUSIONS

The ligament balancing with the patella everted or subluxed may lead to an overly tight medial gap and/or loose lateral gap in the knee with a closed arthrotomy, which has potential consequences for knee function in both CR and PS TKA designs. The results of this study highlight the importance of considering patellar position to ensure optimal soft-tissue balance and joint stability in TKA.

Lateral Laxity in Flexion Influences Patient-Reported Outcome After Total Knee Arthroplasty

Introduction

Slight lateral laxity exists in normal knee especially in flexion. The lateral laxity in flexion has possibility to affect the outcome after total knee arthroplasty (TKA).

Purpose

The purpose of this study was to determine how intraoperative laxity in flexion affects patient-reported outcome after total knee arthroplasty.

Methods

We retrospectively analysed 98 knees with osteoarthritis that underwent total knee arthroplasty. After bone resection, ligament imbalance and joint component gaps were measured using an offset-type tensor while applying a 40-lb joint distraction force at 0° and 90° of knee flexion. The lateral laxity in flexion was determined by subtracting polyethylene insert thickness from the lateral gap at 90°. All patients were divided into three groups: ≤ 2 mm (A), 2-5 mm (B), and > 5 mm (C). One year after surgery, patients were asked to fill out questionnaires using the new Knee Society Score after examination outside the consultation room.

Results

The mean intraoperative lateral laxities at 90° were - 0.2 ± 2.1 mm, 3.5 ± 0.7 mm, and 6.7 ± 1.9 mm in groups A, B, and C, respectively. The symptom score of group C was significantly lower than those of groups A or B. There were no significant differences in terms of satisfaction or the expectation and activity scores among all groups. There were no significant differences in terms of alignment after total knee arthroplasty among all groups.

Conclusions

Excessive lateral laxity possibly resulted in worse patient-reported outcomes. However, slight lateral laxity of 2-5 mm might have no effect on patient-reported outcome and this slight varus imbalance could be acceptable. Altogether, our findings would lead to avoidance of excessive medial release in soft tissue balancing.

Ground kinematically aligned total knee arthroplasty: new personalized technique which enables a stable knee with deep flexion

PURPOSE

This study aimed to evaluate kinematically aligned total knee arthroplasty (KA-TKA) targeting the neutral ground mechanical axis (MA) (hip-to-calcaneus axis), the line from the hip centre to the bottom of the calcaneus, (ground KA-TKA) in terms of its comparison with tibia-restricted modified KA-TKA (modified KA-TKA).

METHODS

This retrospective cohort study included 106 consecutive patients who underwent unilateral KA-TKA for varus osteoarthritis (OA) (60 modified KA-TKAs and 46 ground KA-TKAs). After 1:1 propensity score matching, 60 patients (30 pairs) were matched between the groups with comparable demographic data. The hip-knee-ankle (HKA) angle, coronal femoral component alignment (FCA), and coronal tibial component alignment (TCA) were compared between groups. Intraoperative soft tissue balance, including the joint component gap and varus/valgus balance, was also compared between the groups. One year postoperatively, the clinical outcomes, including the range of motion and 2011 Knee Society Score, were compared between groups.

RESULTS

The HKA angle and FCA/TCA were not significantly different between groups. Whereas the varus/valgus balance showed no significant differences between groups, smaller joint component gaps were found throughout the range of motion in the ground KA-TKA group than in the modified KA-TKA group. Despite no difference in clinical scores between groups, a significantly deeper postoperative flexion angle was achieved in the ground KA-TKA group than in the modified KA-TKA group (p < 0.05).

CONCLUSION

Targeting neutral ground MA in KA-TKA for patients with varus OA has the potential to provide a better flexion angle with stable intraoperative soft tissue balance.

Prosthetic orientation, limb alignment, and soft tissue balance with bi-cruciate stabilized total knee arthroplasty: a comparison between the handheld robot and conventional techniques

PURPOSE

This study aimed to examine the prosthetic orientations, limb alignment, intraoperative soft tissue balance, and early clinical outcomes associated with the use of the relatively new handheld robot technique compared to those associated with the use of the conventional alignment guide for bi-cruciate stabilized total knee arthroplasty (TKA).

METHODS

This retrospective cohort study compared the prosthetic orientation and limb alignment of 35 patients who underwent TKA using robotic assistance (robot group) with those of patients who underwent TKA using a conventional alignment guide (control group). The coronal femoral component alignment (FCA), coronal tibial component alignment (TCA), and the hip-knee-ankle (HKA) angle were compared between groups. Intraoperative soft tissue balance, including the joint component gap and varus/valgus balance assessed by an offset-type tensor, were also compared between groups. One year postoperatively, the clinical outcomes, including the range of motion and 2011 Knee Society Score (KSS), were compared between groups.

RESULTS

The HKA angle and FCA were 0.1° varus and 0.1° varus, respectively, in the robot group and 1.3° varus and 1.3° varus, respectively, in the control group. The difference in the HKA angle and the FCA, but not the TCA, between groups was statistically significant (p < 0.05). The intraoperative soft tissue balance showed more stable joint component gaps and varus/valgus balances throughout the range of motion in the robot group than in the control group. Clinical outcomes of the robot group showed superior 2011 KSS subscales compared to those of the control group.

CONCLUSION

The accuracy of the implantations and stable soft tissue balance in the robot group were superior to those of the control group. The robot group also had superior patient-reported scores for early clinical outcomes.

Posterior cruciate ligament resection under minimum medial collateral ligament release changes tibial internal rotation, joint center gap, and varus ligament balance on joint distraction force at flexion in total knee arthroplasty

BACKGROUND

The purpose of this study was to assess the effect of posterior cruciate ligament resection under minimum medial collateral ligament release on the joint center gap, varus ligament balance, and the rotational change of the femur and tibia.

METHODS

This study included 75 knees with varus osteoarthritis that underwent total knee arthroplasty. After minimum medial collateral ligament releases and bone resection of the distal femur and proximal tibia, the joint center gap and varus ligament balance were measured before and after posterior cruciate ligament resection using a digital tensor with a joint distraction force of 89, 133, 178 N. The rotational changes under a distraction force of 200 N were captured using a navigation system.

FINDINGS

The joint center gap and varus ligament balance at 90° and 120° of flexion significantly increased after posterior cruciate ligament resection with distraction forces of 89 N (90°: 0.4 mm / 0.9° and 120°: 0.5 mm / 0.8°), 133 N (90°: 0.9 mm / 1.3° and 120°: 0.9 mm / 1.1°), 178 N (90°: 1.5 mm / 1.9° and 120°: 1.5 mm / 1.5°). Tibial internal rotation significantly increased after posterior cruciate ligament resection at 90° (1.9°) and 120° (2.2°).

INTERPRETATION

Joint distraction forces after posterior cruciate ligament resection increased the tibial internal rotation, joint center gap, and varus ligament balance at flexion. These findings indicate that posterior cruciate ligament resection should increase the lateral gap more than the medial gap due to tibial internal rotation at flexion. (245 words).

Knee Stability following Posterior-Stabilized Total Knee Arthroplasty: Comparison of Medial Preserving Gap Technique and Measured Resection Technique

Novel medial preserving gap technique (MPGT) focuses on medial compartment stability and allows lateral physiological laxity. This study aimed to compare the MPGT with the measured resection technique (MRT) to determine which provides better postoperative knee stability after posterior-stabilized total knee arthroplasty (PS-TKA). Primary PS-TKA, using either MPGT (n = 65) or MRT (n = 65), was performed in 130 patients with varus knee osteoarthritis. Postoperative knee stabilities at extension and flexion were assessed using varus-valgus stress radiographs and stress epicondylar view, respectively (at 1 month, 6 months, 1 year, and 3 years postoperatively). The distance between the femoral prosthesis and polyethylene insert was measured on each medial and lateral side, defined as the medial joint opening (MJO) and lateral joint opening (LJO), respectively. Decreasing MJO or LJO translated to increasing postoperative stability. The femoral external rotation angle was compared between the two surgical techniques; postoperative knee stability was also compared between the medial and lateral compartments, as well as the surgical techniques. A significant difference was found in the femoral external rotation angle between MPGT (4.2 ± 0.2 degrees) and MRT (3.6 ± 0.1 degrees, p < 0.01). Postoperative MJOs both at extension and flexion were significantly smaller than LJOs using MPGT and MRT at all time points (p < 0.05). MJOs and LJOs at extension using MPGT were significantly smaller than those when using MRT, at 1 and 3 years postoperatively (p < 0.05). Furthermore, MJOs at flexion using MPGT were significantly smaller than those when using MRT at 6 months, 1 year, and 3 years postoperatively (p < 0.05). MPGT provided higher postoperative medial knee stability than MRT both at extension and flexion, even at 3 years after PS-TKA. This suggests that this newly developed surgical technique is a more feasible option than MRT for the preservation of postoperative medial knee stability.

Medial osteophyte resection width correlates with correction of the medio-lateral component gap imbalance during posterior-stabilized total knee arthroplasty

BACKGROUND

There is a lack of robust evidence for a correlation between the medial osteophyte resection and correction of the medio-lateral gap imbalance during total knee arthroplasty. The purpose of the present study was to quantify the effect of osteophyte resection on the medio-lateral component gap imbalance during posterior-stabilized total knee arthroplasty.

METHODS

Forty-five cases of primary posterior-stabilized total knee arthroplasty using the measured resection technique with posterior-stabilized prosthesis for varus knee osteoarthritis were reviewed. Medial and lateral joint gaps at 0°, 10°, 45°, and 90° of flexion, and maximum flexion were measured intraoperatively before and after the osteophyte resection. The relationship between medial osteophyte resection width and change of joint varus angle and medial component gap were assessed using Pearson's correlation coefficient.

FINDINGS

Medial component gap and joint varus angle values at post medial osteophyte resection were significantly larger and lower than at pre-resection (Medial gap: pre 9.5 ± 1.8 mm, post 10.3 ± 1.8 mm, P < 0.001, Joint angle: pre 5.2 ± 2.9°, post 4.2 ± 2.9°, P < 0.001). There was no significant difference between pre and post medial osteophyte resection in lateral component gaps. Per each 1 mm of medial osteophyte resection width, increases of 0.13 mm medial component gap and 0.2° valgus were observed (Medial gap: r = 0.38, P < 0.001, Joint angle: r = 0.38, P < 0.001).

INTERPRETATION

Medial osteophyte resection increases the medial component gap without lateral component gap increase, while decreasing the joint varus angle in primary posterior-stabilized total knee arthroplasty for varus knee osteoarthritis. Osteophyte resection width was found to correlate with correction of the medio-lateral component gap imbalance.

Clinical Efficacy of Preoperative CT-Assisted Planning for Primary Total Knee Arthroplasty: A Pilot Randomized Clinical Trial

This study aims to determine the mean posterior condylar angle (PCA) in the included population and its relation to coronal alignment; and to know the clinical importance of the use of preoperative computed tomography (CT) scan in total knee arthroplasty (TKA). We randomized 50 patients with primary knee osteoarthritis into 2 groups. We used CT scan axial images to measure the PCA. In the first group we followed the CT scan plan (group 1), but in the second we did not follow the plan and adjusted rotation to the standard three degrees (group 2). The mean age of the included patients was 63 years. The radiological data of the included patients showed 5 patients with valgus deformity and 45 patients with varus deformity with the mean coronal alignment of 7.5 degrees. CT scan showed the mean PCA of 3.7 degrees (1.3 degrees). The axial knee postoperative X-ray showed the mean patellar tilt angle of 2.1 degrees (0.5 degrees) and 1.9 degrees (0.5 degrees) in groups 1 and 2, respectively. The congruence angle was 4 degrees (2.6 degrees) in group 1 and 5.5 degrees (3.2 degrees) in group 2. The median Knee Society functional score in group 1 was 85 (12), while it was 84 (7.5) in group 2. The median postoperative Western Ontario and McMaster Universities Arthritis Index score in group 1 was 84 (18.6) whereas 80.2 (13.6) in group 2. The median postoperative Bartlett score in group 1 was 30 (5), while it was 30 (6) in group 2. The use of preoperative CT scan did not improve the patient functional scores after TKA.

Mechanical Alignment in Knee Replacement Homogenizes Postoperative Coronal Hip-Knee-Ankle Angle in Varus Knees: A Navigation-Based Study

After knee replacement, postoperative lower limb alignment is influenced by the geometry of the prosthesis position and surrounding soft tissue that contributes to the hip-knee-ankle (HKA) angle. The purpose of this study is to determine the dynamic coronal HKA angle after mechanical alignment in total knee replacement using computer navigation. We conducted a pre-post design study of 71 patients with varus osteoarthritic knees on which total knee arthroplasty was performed. The HKA was measured before and at the end of the surgical procedure with the patient in the supine position using a navigation system at 30, 60, and 90 degrees of knee flexion. Postoperative implant position and flexion and extension gaps were assessed. HKA was clustered in three preoperative dynamic patterns (PDPs; Varus-Neutral, Varus-Valgus, and Varus-Varus). There were statistically significant differences in the dynamic coronal HKA between the preoperative and postoperative statuses after mechanically aligned knee replacement (with p < 0.0001) Before the surgical procedure, statistically significant differences were found between patterns at any angle of flexion confirming a well-differentiated preoperative dynamic behavior between the three groups. Postoperatively, 98.6% (71 out of 72) of the knees were within ± 3 degrees of the HKA at full extension. Fifty-eight knees (80.6%) were assessed to a "within-range" postoperative dynamic alignment at any grade of flexion considered. There are differences between the preoperative and postoperative status of the dynamic coronal HKA angle after mechanically aligned knee replacement. We proposed that an excellent dynamic HKA alignment is achieved not only at full extension within the range of 0 ± 3 degrees but also when this alignment is maintained at 30, 60, and 90 degrees.

The knee position at tourniquet inflation does not affect the gap balancing during total knee arthroplasty

INTRODUCTION

The relationship between gap balancing and clinical outcome of total knee arthroplasty (TKA) has been researched. Tourniquet is widely used by most surgeons; however, there are little quantitative data about the gap depending on the tourniquet usage. We aimed to investigate whether the knee position at tourniquet inflation affected the gap measurement intra-operatively.

METHODS

TKA was performed for 104 knees and the tourniquet was inflated with the knee at full flexion and extension. The gap was measured in each static knee flexion status (0°, 30°, 45°, 60°, 90°, 120°, and in full flexion) using a tensor. We measured the gap twice; under the tourniquet inflation and release. The gap difference at each static knee flexion status was calculated by subtracting the gap under release from that under inflation.

RESULTS

When the tourniquet was inflated with the knee at full flexion, the mean gap differences were < 1 mm and < 1° in each static knee flexion status. When the tourniquet was inflated with the knee at full extension, the mean gap differences were < 1 mm and < 1°, respectively. All values of the gap difference were minimum, and were not affected by the tourniquet, whether the knee position at the tourniquet inflation was flexed or extended.

CONCLUSIONS

We postulated that the knee position at tourniquet inflation would affect the gap, which was refuted by our results. This shows that we can measure the gap without considering the knee position at tourniquet inflation.

Multivariate Analysis of Associations between Patellofemoral Instability and Gluteal Muscle Contracture: A Radiological Analysis

The purpose of this study was to investigate the associations between gluteal muscle contracture (GMC) severity and patellofemoral instability and evaluate the reliability of novel indicators by multivariate analysis. Clinical and imaging data from 115 patients with GMC were collected for retrospective analysis. Two novel indicators were used to evaluate GMC severity (knee flexion angle and hip flexion angle, feet distance), and two additional novel parameters were used to reflect patellofemoral instability [patellar displacement vector (L, α), patella-femoral trochlear (P-FT) area, and femoral-trochlear-patella (FT-P) area]. In this study, patients with moderate contracture were dominant, and 35.65% also experienced anterior knee pain after physical activity. Ordered logistic regression analysis indicated that a more serious GMC represented a higher risk of lateral tilt and lateral displacement of the patella. Multivariate analysis showed that feet distance was a reliable indicator for evaluating the severity of GMC. The results showed that the more serious the GMC, the more significant the difference between the P-FT area and the FT-P area of the patellofemoral joint space. L, patellar tilt angle, patellar congruency angle, and lateral patellofemoral angle were independent risk factors for this difference. A more serious GMC represents a higher risk of patellar subluxation.

Influence of Patella Position on Soft Tissue Balance and Clinical Outcomes in Patients Undergoing Minimally Invasive Total Knee Arthroplasty, a Randomized Clinical Trial

Background

We hypothesized that subluxating patellar during minimally invasive total knee arthroplasty (MIS-TKA) would affect intraoperative soft tissue balance and postoperative clinical outcome.

Methods

From December 2018 to May 2020, 189 patients receiving primary MIS-TKA were enrolled. The gap-balance technique was used, with patients randomly assigned to undergo osteotomy and balance of soft tissue with patella reduced (group A; n = 93) or subluxated (group B; n = 96). The gap and varus?valgus angle were compared between groups in both extension and flexion position. The gap and varus?valgus angle were also compared before and after reducing patellar in group B. Femoral prosthesis rotation, mechanical femoral axis–to–tibial axis angle, Knee Society Score (KSS), visual analog scale (VAS), and range of motion (ROM) were compared postoperatively between two groups. Follow-up was 12 months.

Results

The flexion gap and the varus angle were significantly greater (0.4 mm and 0.7 degree) after patella reduction than before reduction, but the extension joint gap and varus angle were comparable before and after patella reduction. The femoral prosthesis tended to be internally rotated (0.65 degree) in group B. ROM and VAS was better in the group A than in group B at 1 month after surgery, but the differences were not significant at 3, 6 and 12 months. KSS was comparable between the groups after surgery.

Conclusions

During MIS-TKA, as far as possible, soft tissue balance should be achieved with the patella reduced; otherwise, the femoral prosthesis may be installed more internally and, after patella reduction, the flexion gap and varus angle would increase.

Clinical Trial Registration

Current Controlled Trials ChiCTR2000034106, https://www.chictr.org.cn/hvshowproject.aspx?id=39987.

Component gap measurement reflects the planned gap balance during total knee arthroplasty more accurately and reliably than bone surface gap measurement

PURPOSE

This study aimed to compare the reliability of two gap assessment methods (component and bone surface gap measurement vs. planned gap balance) and identify the contributors to component gaps other than planned gaps.

METHODS

The prospectively collected data for 122 consecutive primary total knee arthroplasties (TKAs; 114 patients). After femoral planning for gap balancing, the medial and lateral planned gaps were calculated (planned gap). The established medial extension and flexion gaps (MEG and MFG, respectively) and lateral extension and flexion gaps (LEG and LFG, respectively) were measured with and without the TKA components (bone surface and component gaps) at 0° and 90° flexion. The intraclass and Pearson correlation coefficients for each gap measurement method were assessed using planned gap values, and multiple linear regression analyses were performed to identify the contributors to component gaps.

RESULTS

Compared with the bone surface gap measurement, the component gap measurement showed higher reliability and stronger correlation with the planned gap balance for each gap. The changes in the medial posterior femoral offset contributed to the MEG and LEG, whereas those in the joint line height contributed to the LEG. The changes in the hip-knee-ankle angle and lateral posterior femoral offset contributed to the LFG.

CONCLUSION

Component gap measurements of the established gap more accurately and reliably reflect the planned gap balance than do bone surface gap measurements. The established gaps are affected by several factors other than femoral planning.

A tensor with a flat surface overestimates midflexion laxity in total knee arthroplasty: Comparison between a tensor with a flat-shaped surface and a tensor with an insert-shaped surface

BACKGROUND

Soft tissue balance is important for the success of total knee arthroplasty (TKA). Various types of tensors have been developed for the precise measurement of a gap. We hypothesized that the surface shape of the tensor that contacted the TKA component affected the gap measurement. This study aimed to compare the gaps obtained with flat and insert-shaped surface tensors.

METHODS

Two senior surgeons performed 95 TKAs (Vanguard-PS:55 knees; Persona-PS:40 knees). The joint gap was measured in each static knee flexion status (0°, 30°, 45°, 60°, 90°, 120°, and full flexion). We compared the gaps measured with a flat surface tensor and an insert-shape surface tensor. We defined a significant change as a gap difference of >1 mm with a statistical significance.

RESULTS

In Vanguard-PS, significant changes were observed at 30° and 45°. In Persona-PS, significant changes were observed at 30°, 45°, and 60°. In both implants, gaps measured with the flat tensor were larger than those measured with the insert tensor at approximately midflexion, and the significant changes disappeared in higher flexion position over midflexion.

CONCLUSIONS

The surface shape of the tensor affected the measurement of midflexion laxity in TKA. When measuring the gap with a flat tensor, the midflexion laxity was overestimated. A tensor with an insert-shaped surface should be used to measure the gap in TKA.

Can Intraoperative Intra-Articular Loads Predict Postoperative Knee Joint Laxity Following Total Knee Arthroplasty? A Cadaver Study with Smart Tibial Trays

Ligament balancing during total knee arthroplasty (TKA) often relies on subjective surgeon experience. Although instrumented tibial trays facilitate an objective assessment of intraoperative joint balance through quantification of intra-articular joint loads, postoperative clinical assessment of joint balance relies on passive stress tests quantifying varus–valgus joint laxity. This study aimed at correlating the intraoperative and postoperative metrics used to assess joint balance while also comparing joint loads obtained during passive assessment and active functional motions. Four experienced surgical fellows were assigned a fresh-frozen lower limb each to plan and perform posterior-stabilised TKA. An instrumented tibial insert measured intraoperative intra-articular loads. Specimens were then subjected to passive flexion–extension, open-chain extension, active squatting, and varus–valgus laxity tests on a validated knee simulator. Intra-articular loads were recorded using the instrumented insert and tibiofemoral kinematics using an optical motion capture system. A negative correlation was observed between mean intraoperative intra-articular loads and corresponding mean postoperative tibial abduction angle during laxity tests (medial: R = −0.93, p = 0.02; lateral: R = −0.88, p = 0.04); however, this was not observed for each specimen. Peak intra-articular load distribution for active squatting was lateral-heavy, contrasting to the medial-heavy distribution observed in passive intraoperative measurements, for all specimens. These aspects should be given due consideration while assessing intraoperative and postoperative joint stability following TKA.

Accuracy of total knee arthroplasty using the modified gap technique based on the bone gap: an evaluation of the bone gap with a distal femoral trial component

BACKGROUND

In total knee arthroplasty (TKA) using the modified gap technique, the soft-tissue balance is measured after osteotomy of the distal femur and proximal tibia (conventional bone gap). However, after osteotomy, the flexion gap size during 90° knee flexion may be larger than that observed after implantation. The tension of the lateral compartment during 90° flexion may also be reduced after osteotomy of the distal femur. We manufactured a distal femoral trial component to reproduce the condition after implantation and prior to posterior condyle osteotomy. This study aimed to evaluate the effect of the trial component on the flexion gap.

METHODS

This prospective study included 21 consecutive patients aged 78 years with medial osteoarthritis who underwent cruciate-retaining TKA between February 2017 and March 2018. The postoperative flexion gap size and inclination during 90° flexion were compared between cases with and without the trial component.

RESULTS

The mean joint gap size with the trial component (13.4 ± 0.80 mm) was significantly smaller than that without the trial component (14.7 ± 0.84 mm). The mean gap inclination angle with the trial component (3.7° ± 0.62°) was significantly smaller than that without the trial component (5.5° ± 0.78°).

CONCLUSIONS

In the present study, the joint gap size and medial tension were significantly reduced after the trial component had been set. Accurate measurement of the soft-tissue balance is an important factor in the modified gap technique, and this method using a distal femoral trial component can offer better outcomes than those achieved with conventional methods.

Soft-Tissue Balancing Technology for Total Knee Arthroplasty

» Improperly balanced total knee arthroplasties are at increased risk for complications including residual pain and/or instability, which are often corrected by a revision surgical procedure. » Because of the morbidity and financial burden associated with revision total knee arthroplasty, different technological applications, such as tibial insert sensors and computer-assisted gap balancing, are being used to assist with soft-tissue balancing during primary total knee arthroplasty. » Computer-assisted gap balancing increases the accuracy of mechanical alignment and improves the precision of balancing flexion and extension gaps during total knee arthroplasty. It is unclear whether this translates to improved short-term or long-term outcome measures. Considerations of this technology include increased cost, increased operative time, and a steep learning curve. » Intraoperative sensors increase the accuracy of balancing by quantifying the mediolateral intercompartmental load distribution through the range of motion, which may lead to improved outcome scores, patient satisfaction, higher activity levels, and decreased pain. The advantages of this technology compared with computer assistance include decreased cost and no disruption of operative time or workflow. Limited availability with constrained implants, limited implant choices, and a lack of long-term follow-up data have reduced utilization of intraoperative sensors. » Computer-assisted gap balancing and intraoperative sensors are not yet universally accepted, and the cost-benefit ratio associated with their use remains a consideration in today’s cost-conscious health-care environment. Future research should focus on longer-term follow-up to evaluate implant survivorship, cost-effectiveness, and clinical outcomes.

The medial gap is a reliable indicator for intraoperative soft tissue balancing in posterior-stabilized total knee arthroplasty

BACKGROUND

Appropriate soft tissue balance and accurate alignment are important for successful total knee arthroplasty (TKA). However, the optimal technique for establishing and measuring soft tissue balancing remains unclear. The aim of this study was to analyze the intraoperative medial and lateral gap pattern using digital knee balancer in posterior-stabilized (PS) TKA.

METHODS

This study involved 55 patients with medial osteoarthritis who underwent a primary TKA using an image-free navigation system. The extension gap and the flexion gap at 90° knee flexion were assessed using an offset seesaw-type digital balancer. Continuous joint distraction force from 10 lb to 60 lb was applied. Medial gap, lateral gap, and varus angle were measured.

RESULTS

The medial bone gap difference between extension and flexion was constant regardless of the distraction force from 20 lb to 60 lb. The lateral bone gap was significantly greater than the medial bone gap in extension and flexion from 30 lb to 60 lb (P < 0.05). The varus angle changed depending on the distraction force, especially in flexion. The varus angle in flexion was significantly greater than that in extension from 40 lb to 60 lb (P < 0.05).

CONCLUSIONS

The medial bone gap is a reliable indicator unaffected by the distraction force during surgery and is useful for adjusting the medial gap in extension and flexion appropriately to ensure medial stability in PS-TKA. The digital knee balancer and navigation system support both precise gap assessment and surgery.

Is it possible to predict the final component gap in flexion before femoral posterior condylar osteotomy in cruciate-retaining and posterior-stabilized total knee arthroplasty?

BACKGROUND

In total knee arthroplasty (TKA) with posterior condylar osteotomy using anatomical landmarks, predicting the final flexion gap is impossible, as it differs with the presence or absence of the posterior cruciate ligament. We compared the predicted flexion gap, based on pre-femoral posterior condylar osteotomy measurements, with the postsurgical final flexion gap in cruciate-retaining (CR) and posterior-stabilized (PS) TKA.

METHODS

One hundred knees of patients with osteoarthritis were included: 35 underwent CR, and 65 PS TKA. Distal femoral and proximal tibial osteotomy using the measured resection technique was performed. An anterior and posterior femoral osteotomy guide was set parallel to the surgical epicondylar axis, and the predicted flexion gap was measured using a seesaw tensor attached to the guide. After all procedures, the final component gap in flexion was measured using a similar seesaw tensor at the patella reduction position and was compared with the predicted gap.

RESULTS

The correlation coefficients for predicted vs. final component gap were 0.45 (P < 0.05) in CR and 0.82 (P < 0.001) in PS. The mean differences between predicted and final gaps were 1.8 mm for CR and 1.0 mm for PS. In 34.3% of CR cases, the gap difference was more than 2 mm.

CONCLUSION

It is possible to predict the final flexion gap before femoral posterior condylar osteotomy, with a strong correlation observed between predicted and final component gaps in PS TKA. However, in CR, more than 30% of the cases showed unexpectedly large final flexion gaps.

Comparison of intraoperative soft tissue balance measurement between two tensor systems in total knee arthroplasty

BACKGROUND

Differences in measurement outcomes using different tensors in total knee arthroplasty (TKA) remain unknown. This study aimed to compare intraoperative soft tissue balance between two measurement systems in TKA.

METHODS

This study included 24 cruciate-retaining (CR) and 27 posterior-stabilized (PS) TKAs for varus-type osteoarthritis. All TKAs were performed with the measured resection technique. Intraoperative soft tissue balance was assessed with femoral component placement and patellofemoral joint reduction throughout the range of motion. Measurements were performed using the Offset Repo-Tensor (Zimmer) and Ligament Sensor Tensor (Depuy). Joint component gaps and varus/valgus ligament balance were compared statistically in CR and PS TKAs.

RESULTS

Joint component gaps with the Offset Repo-Tensor were significantly larger at 0°, 10°, 30°, and 60° of knee flexion in CR TKA and at all knee flexion angles, except 0° and 135°, in PS TKA than those with the Ligament Sensor Tensor (P < .05). Varus balance with the Offset Repo-Tensor was significantly larger at 0°, 10°, and 30° of knee flexion in CR TKA and at 10°, 30°, 60°, 90°, and 120° of knee flexion in PS TKA than that with the Ligament Sensor Tensor (P < .05).

CONCLUSION

Surgeons should consider the discrepancy in assessing intraoperative soft tissue balance depending on the tensor used. The Ligament Sensor Tensor tended to underestimate soft tissue balance in CR and PS TKAs compared with the Offset Repo-Tensor, especially in PS TKA. Thus, surgeons should know the difference in values between the offset-type tensor with consistent distraction force and a spring-loaded tensor.

Joint distraction force changes the three-dimensional articulation of the femur and tibia in total knee arthroplasty: a cadaveric study

PURPOSE

The purpose of this study was to test the hypotheses that the joint distraction force changes the three-dimensional articulation between the femur and the tibia and that the presence of posterior cruciate ligament (PCL) affects the three-dimensional articulation during joint gap evaluation in total knee arthroplasty (TKA).

METHODS

Cruciate-retaining TKA procedures were performed on 6 cadaveric knees using a navigation system. The joint center gap and varus ligament balance were measured using Offset Repo-Tensor^® with the knee at 90° of flexion before and after PCL resection for joint distraction forces of 89, 178, and 266 N. The three-dimensional location of the tibia relative to the femur and the axial rotational angle of the tibia were also assessed.

RESULTS

Regardless of PCL resection, the joint center gap became larger (p = 0.002, p = 0.020) and varus ligament balance became more varus (p = 0.002, p = 0.002) with increasing joint distraction force, whereas the tibia was more internally rotated (p = 0.015, p = 0.009) and more anteriorly located (p = 0.004, p = 0.009). The tibia was more internally rotated (p = 0.015) and more posteriorly located (p = 0.026) after PCL resection than before resection.

CONCLUSIONS

Joint distraction force changed three-dimensional articulation regardless of PCL preservation. PCL function was revealed as a factor restraining both tibial posterior translation and internal rotation. Surgeons should recognize that joint gap evaluation using a tensor device is subject to three-dimensional changes depending on the magnitude of the joint distraction force.

Influence of Narrow Femoral Implants on Intraoperative Soft Tissue Balance in Posterior-Stabilized Total Knee Arthroplasty

BACKGROUND

Narrow femoral implants were developed to improve fit and prevent overhang in primary total knee arthroplasty (TKA). We compared intraoperative soft tissue balance between standard and narrow implants in posterior-stabilized (PS) TKA.

METHODS

We enrolled 30 consecutive patients with varus osteoarthritis undergoing PS TKA using an image-free navigation system. Standard and narrow femoral trial implants were inserted, and their soft tissue balance was measured. Subgroup analysis, based on the actual implanted femoral implant, was performed to assess the influence of narrow implants on soft tissue balance.

RESULTS

Narrow trial group had significantly larger joint component gaps than standard trial group at all measured flexion angles, except at 60° (P < .05). For the standard implant cohort, narrow trial group had significantly larger joint component gaps than standard trial group at 30°, 120°, and 135° flexion (P < .05). For the narrow implant cohort, narrow trial group had significantly larger joint component gaps than standard trial group at all measured flexion angles, except at 0° and 60° (P < .05). Narrow trial group had significantly larger varus ligament balance than standard trial group at 45° and 60° flexion (P < .05). The varus angles for standard implants were comparable between groups; however, narrow trial group had significantly larger varus angles for narrow implants than standard trial group at 45°, 60°, and 120° flexion (P < .05).

CONCLUSION

The medial-lateral dimension and volume of the femoral component may influence intraoperative soft tissue balance in PS TKA. The effects may be greater when narrow implants are selected to avoid component overhang.

The Effect of Posterior Tibial Slope on Joint Gap and Range of Knee Motion in Mobile-Bearing Unicompartmental Knee Arthroplasty

BACKGROUND

It is widely known that the posterior tibial slope (PTS) has an influence on the clinical outcome of arthroplasty. However, the influence of PTS on unicompartmental knee arthroplasty (UKA) is still not fully clear. The objective of this study is to reveal the effect PTS has on knee flexion and extension joint gap and the postoperative range of motion in mobile-bearing UKA. Moreover, we investigated an adequate PTS angle in mobile-bearing UKA.

METHODS

Oxford UKA was performed so that the flexion gap would be equal to the extension gap. Correlation between the gap value difference from 90° to 120° of the knee flexion and the PTS was evaluated. Correlation between postoperative range of motion and the PTS was also evaluated to find whether a small degree of PTS would cause knee flexion restriction.

RESULTS

The PTS had a moderate positive correlation with the flexion gap difference. However, the PTS had no correlation with the knee flexion angle both postoperative and 1 year after surgery.

CONCLUSION

It was suggested that the degree of the PTS should not be so large to avoid joint looseness throughout every knee angle. Increasing the degree of the PTS had the potential to dislocate the bearing. Since a small degree of the PTS does not have an influence on the clinical outcome, surgeons should aim to cut the tibia with a posterior slope of less than 7°.

Changes of mediolateral soft tissue gaps in total knee arthroplasty after suturing medial extensor in navigation

PURPOSE

Aim is to investigate the changes of mediolateral soft tissue gaps in total knee arthroplasty (TKA) after suturing medial extensor.

METHODS AND MATERIALS

We compared the differences of medial and lateral gap values that were shown by the computer navigation at 0°, 45°, 90°, and 120° knee flexion during patella in situ and during patella repaired by a towel clip on two constant sites. Fifty consecutive knees (43 patients) scheduled for TKA due to varus knee osteoarthritis, from February 2017 to May 2017, were enrolled in this prospective study.

RESULTS

The medial gaps with patella repaired were significantly lower ( p < 0.05) than the medial gaps with patella in situ at 45°, 90°, and 120° knee flexion. Differences in the medial gap were largest at 90, with the difference of 0.87 mm. Twenty-four of 50 cases (48%) showed medial gap differences of 1 mm or over, and 13 of 50 cases (26%) showed medial gap differences of 2 mm or over. The variation in the medial gap at 90° following patellar repair showed significant association (correlation coefficient = 0.78, p = 0.001) with the difference between medial and lateral gaps (medial gap - lateral gap) at 90° of patella in situ. At 90° knee flexion, when the medial and lateral gap difference in patella in situ was 1 mm or less, 73.5% (25/34) of the cases showed variation in the medial gap of less than 1 mm after patellar repair.

CONCLUSION

During TKA, while measuring the medial gap with patella in situ, overestimation might occur, especially in the position of knee flexion. Thus, reevaluation using towel clips should be considered when the medial and lateral gap difference is 1 mm or larger when patella in situ during evaluation of the medial and lateral gaps at 90° knee flexion.

Imageless, robotic-assisted total knee arthroplasty combined with a robotic tensioning system can help predict and achieve accurate postoperative ligament balance

Background

Achieving balanced gaps is a key surgical goal in total knee arthroplasty, yet most methods rely on subjective surgeon feel and experience to assess and achieve knee balance intraoperatively. Our objective was to evaluate the ability to quantitatively plan and achieve a balanced knee throughout the range of motion using robotic-assisted instrumentation in a tibia-first, gap-balancing technique.

Methods

A robotic-assisted, gap-balancing technique was used in 121 consecutive knees. After resection of the proximal tibia, a computer-controlled tensioning device was inserted into the knee joint and the pre-femoral-resection knee gaps were acquired dynamically throughout flexion under controlled load. Predicted gap profiles were used to plan the femoral implant by adjusting the implant alignment and position within certain boundaries to achieve a balanced knee throughout the range of flexion. Femoral cuts were then made according to this plan using a miniature robotic-assisted cutting guide. The tensioning device used to measure the pre-femoral-resection gaps was then reinserted into the joint to quantify the final gap balance under known tension. The final gap profiles were then compared with the predictive gap plans.

Results

The overall root mean square error between the predicted and achieved gaps was 1.3 mm and 1.5 mm for the medial and lateral sides, respectively. Use of robotic assistance resulted in over 90% of knees having mediolateral balance within 2 mm across the flexion range. Gaps at 0° flexion were 2 mm smaller than the gaps at 90°. This difference decreased to less than 1 mm when comparing the tibiofemoral gaps at 10°, 45°, and 90°.

Conclusions

Imageless, robotic-assisted total knee arthroplasty accurately predicts postoperative gaps before femoral resections. This allows surgeons to virtually plan femoral implant alignment and optimize gap balance throughout the range of motion. The accurate prediction of gaps throughout the arc of motion combined with precise, robotically assisted femoral resection produces accurate postoperative ligament balance consistently.

Medial knee stability at flexion increases tibial internal rotation and knee flexion angle after posterior-stabilized total knee arthroplasty

BACKGROUND

Soft-tissue balance is an important element for the success of total knee arthroplasty; however, the influence of intraoperative soft-tissue balance on knee kinematics in posterior-stabilized-total knee arthroplasty remains unknown. We investigated whether intraoperative soft-tissue balance could influence knee kinematics and flexion angle after posterior-stabilized-total knee arthroplasty.

METHODS

This study included 30 patients with knee osteoarthritis and varus alignment who underwent posterior-stabilized total knee arthroplasty; intraoperative soft-tissue balance parameters, such as varus ligament balance and joint component gap, were assessed by an offset-type tensor at knee flexion angles of 0°, 10°, 30°, 60°, 90°, 120°, and 135°. Medial and lateral compartment gaps were calculated. The amount of tibial internal rotation was determined between 60° and 135° flexion by the navigation system. Simple linear regression analysis was used to analyze the effects of intraoperative soft-tissue balance on tibial internal rotation. Linear regression analysis was used to assess correlation between tibial internal rotation and postoperative knee flexion angle.

FINDINGS

Medial compartment gaps at 60° (r = -0.57, P < 0.05) and 90° (r = -0.60, P < 0.05) of flexion were significantly negatively correlated with tibial internal rotation. Moreover, tibial internal rotation showed a significant correlation with the 2-year postoperative knee flexion angle (r = 0.50, P < 0.05) and improvement in knee flexion angle (r = 0.61, P < 0.05).

INTERPRETATION

Thus, smaller medial compartment gaps at 60° and 90° of flexion play an important role in achieving medial pivot motion with tibial internal rotation; moreover, tibial internal rotation provides a better flexion angle after posterior-stabilized total knee arthroplasty.

Effect of intraoperative soft tissue balance on postoperative recovery of ambulatory and balancing function in posterior-stabilized total knee arthroplasty

BACKGROUND

The effectiveness of total knee arthroplasty (TKA) on ambulatory and balancing function recovery should be quantitatively investigated. The present study aimed to evaluate ambulatory function using 3m-timed up and go (TUG) test and balancing function using one-leg standing time (ST) from before and after TKA, and to analyze the effects of intraoperative soft tissue balance on the postoperative improvement of their functions after TKA.

METHODS

The study included 65 patients with varus-type knee osteoarthritis who underwent primary posterior-stabilized (PS) TKA. The TUG test and ST were performed preoperatively, 1 month and 12 months after TKA. The intraoperative soft tissue balance, medial and lateral joint looseness (MJL, LJL) were evaluated with both femoral trial in place and patellofemoral joint reduced using the OFR tensor® with the knee at 0, 10, 30, 45, 60, 90, 120, and 135°. The influences of MJL and LJL on the improvement in TUG test time and ST and the 2011 Knee Society Knee Scoring System (2011 KSS) 12 months after TKA were investigated.

RESULTS

The mean TUG test times and ST were 12.7 and 13.1, 13.5 and 15.4, and 10.9 and 19.2 s preoperatively, 1 month and 12 months after TKA, respectively. The MJL at 10, 30 and 90° flexion was significantly negatively correlated with improvement in the TUG test time and the MJL at 0° flexion was significantly negatively correlated with improvement in the ST. However, the LJL was not significantly correlated with improvement in the TUG test time and the ST. The MJL at 45, 60, and 90° flexion was significantly negatively correlated with the 12-month postoperative score on the activities subscale of the 2011 KSS.

CONCLUSIONS

The higher intraoperative medial knee stability may be associated with the better postoperative improvement in ambulatory function and activities subscale of the 2011 KSS after PS-TKA.

Intraoperative soft tissue balance using novel medial preserving gap technique in posterior-stabilized total knee arthroplasty: comparison to measured resection technique

PURPOSE

To investigate intraoperative soft tissue balance with femoral component trial in place using a novel medial preserving gap technique, focusing on medial compartment stability and allowing lateral physiological laxity, with compared with using a measured resection technique in posterior-stabilized (PS) total knee arthroplasty (TKA).

METHODS

Primary PS TKA, using either medial preserving gap technique (n = 127) or measured resection technique (n = 148), was performed in 275 subjects with varus knee osteoarthritis. Intraoperative soft tissue balance with femoral component in place was assessed using Offset Repo-Tensor with 40 lbs. of joint distraction force throughout the range of motion, and medial and lateral compartment gaps (mm) were calculated. Medial and lateral joint gap changes (mm) were calculated by subtracting the medial/lateral compartment gap at 0° from the medial/lateral compartment gap at each knee flexion angle, respectively.

RESULTS

Medial and lateral joint gap changes in medial preserving gap technique were significantly smaller than measured resection technique respectively (mean difference between two procedures: medial; 0.9 ± 0.2 mm, lateral; 1.0 ± 0.3 mm). Medial and lateral joint gaps were significantly changed during knee flexion in measured resection technique, whereas medial and lateral joint gaps were not significantly changed during mid-to-deep knee flexion (30°-90° in medial, 30°-120° in lateral) in medial preserving gap technique.

CONCLUSIONS

Medial preserving gap technique provided more consistent intraoperative soft tissue balance during knee flexion than the measured resection technique, suggesting that this novel technique can be utilized to obtain a more stable joint gap in PS TKA.

LEVEL OF EVIDENCE

III.

Posterior Reference Position Affects Intraoperative Kinematic and Soft Tissue Balance in Navigated Posterior-Stabilized Total Knee Arthroplasty

BACKGROUND

The importance of medial compartment stability is recognized in total knee arthroplasty (TKA). To manage the medial extension-flexion gap, the posterior reference position can be changed from conventional posterior center to posterior medial in measured resection techniques. This study aimed to compare the intraoperative soft tissue balance and rotational kinematics between the posterior medial and posterior center reference groups.

METHODS

We enrolled 57 consecutive patients with varus osteoarthritis undergoing posterior-stabilized (PS) TKA using an image-free navigation system. The detailed surgical plan in both groups and intraoperative kinematics were recorded using navigation, and soft tissue balance measured with an offset-type tensor was statistically compared between groups.

RESULTS

Patients were divided into the posterior center reference group (n = 32) and posterior medial reference group (n = 25). The posterior medial and posterior lateral condyles were significantly thicker in the posterior center reference group (P < .05). Although preoperative rotational kinematics were comparable between groups, the tibial rotational position was significantly more externally rotated in the posterior center reference group than in the posterior medial reference group at 45°, 60°, and 90° of flexion (P < .05). The varus angle and joint component gap were significantly smaller in the posterior medial reference group than in the posterior center reference group at 60° and 90° of flexion (P < .05).

CONCLUSION

The posterior reference position affects intraoperative kinematics and soft tissue balance in navigated PS TKA. Posterior medial reference PS TKA decreases the excessive tibial external rotation during midflexion and increases the flexion stability compared with conventional posterior center reference PS TKA.

Current concepts and future perspectives in computer-assisted navigated total knee replacement

BACKGROUND

Total knee replacements (TKR) aim to restore stability of the tibiofemoral and patella-femoral joints and provide relief of pain and improved quality of life for the patient. In recent years, computer-assisted navigation systems have been developed with the aim of reducing human error in joint alignment and improving patient outcomes.

METHODS

We examined the current body of evidence surrounding the use of navigation systems and discussed their current and future role in TKR.

RESULTS

The current body of evidence shows that the use of computer navigation systems for TKR significantly reduces outliers in the mechanical axis and coronal prosthetic position. Also, navigation systems offer an objective assessment of soft tissue balancing that had previously not been available. Although these benefits represent a technical superiority to conventional TKR techniques, there is limited evidence to show long-term clinical benefit with the use of navigation systems, with only a small number of studies showing improvement in outcome scores at short-term follow-up. Because of the increased costs and operative time associated with their use as well as the emergence of more affordable and patient-specific technologies, it is unlikely for navigation systems to become more widely used in the near future.

CONCLUSIONS

Whilst this technology helps surgeons to achieve improved component positioning, it is important to consider the clinical and functional implications, as well as the added costs and potential learning curve associated with adopting new technology.

Comparison of Intraoperative Soft Tissue Balance Between Cruciate-Retaining and Posterior-Stabilized Total Knee Arthroplasty Performed by a Newly Developed Medial Preserving Gap Technique

BACKGROUND

Medial stability of the knee is considered to be associated with good clinical results after total knee arthroplasty (TKA). This study aimed to compare intraoperative soft tissue balance between cruciate-retaining (CR) and posterior-stabilized (PS) TKA performed by a newly developed medial preserving gap technique, which aimed at preserving medial stability throughout the range of motion.

METHODS

Seventy CR-TKAs and 70 PS-TKAs were performed in patients with varus type osteoarthritis with the novel technique guided by tensor measurements. Final intraoperative soft tissue balance with femoral trial component in place and patellofemoral joint reduced, including the joint component gap and varus/valgus ligament balance (varus angle), with the knee at 0° (full extension), 10° (extension), 30°, 45°, 60°, 90° (flexion), 120°, and 135° (deep flexion), was measured with Offset Repo-Tensor under 40 lbs of joint distraction force. The medial compartment gap (MCG), lateral compartment gap, and medial joint looseness (MCG-polyethylene insert thickness) at each flexion angle were calculated from the measured joint component gap and varus ligament balance, and compared between CR-TKA and PS-TKA.

RESULTS

The MCGs from extension to deep flexion of the knee showed no significant differences between CR-TKA and PS-TKA. The lateral compartment gaps in PS-TKA from 30° to 60° of knee flexion was significantly larger than those in CR-TKA (P < .05). Medial joint looseness showed no significant differences between CR-TKA and PS-TKA which is consistent within 1 mm from extension to flexion of the knee.

CONCLUSION

PS-TKA similarly achieved medial stability comparable to CR-TKA using the medial preserving gap technique.

Post-cam clunk syndrome after posterior stabilized total knee arthroplasty as a sign of early femoral component loosening

Soft tissue impingements are well-known complications of total knee arthroplasty. The impingements usually occur between the medial or lateral femoral component and tibial insert, and between the patella and femoral components. We report a rare case of impingement of the soft tissue between the femoral intercondylar fossa and post of the polyethylene insert, which caused pain and walking disability. After the surgery for the arthroscopic removal of the soft tissue, the symptoms disappeared. However, prosthetic loosening of the femur occurred several months after the arthroscopic surgery, requiring revision surgery. We would propose to call this symptom as post-cam clunk syndrome.

Posterior condylar offset influences the intraoperative soft tissue balance during posterior-stabilized total knee arthroplasty

PURPOSE

This study aimed to clarify the influence of the posterior condylar offset (PCO) on intraoperative soft tissue balance including the joint component gap and varus ligament balance measured by an offset-type tensor during posterior-stabilized (PS) total knee arthroplasty (TKA).

METHODS

In this study, 35 patients with osteoarthritis of the knee underwent PS TKA. Intraoperative soft tissue balance including the joint component gap and varus/valgus ligament balance were assessed at 0°, 10°, 45°, 90°, and 135° of flexion with an offset-type tensor that could be used with the femoral component placement and patellofemoral joint reduction. The correlations between the postoperative PCO and the intraoperative soft tissue balance parameters were assessed using simple regression analysis.

RESULTS

The joint component gap at 0° extension was inversely correlated with the PCO (R = -0.41, p < 0.05). The joint component gap of 10°-0° was positively correlated with the PCO (R = 0.35, p < 0.05). No other soft tissue balance parameters were correlated with the PCO.

CONCLUSIONS

A larger PCO was confirmed to reduce joint component gap in extension but not always in flexion in PS TKA.

Standard versus physiologic bone preparation in total knee arthroplasty and the effect on joint space opening

BACKGROUND

Total knee arthroplasty is an effective treatment for osteoarthritis. Restoration of physiologic varus alignment may restore the native soft tissue tension and improve outcomes.

METHODS

Six paired fresh-frozen knee specimens were used to perform total knee arthroplastys. The left and right sides of were randomly assigned to have either a physiologic alignment cut or a standard of care neutral alignment bony cut prior to the implantation. Loads of 100 and 200N were applied at 0, 30, 60, and 90° of flexion and the magnitude of the medial and lateral compartment distraction was measured. The loads were applied with the knee specimen intact and post arthroplasty.

FINDINGS

The physiologic alignment had no difference between medial and lateral gaps at either load. With 100N of load the physiologic alignment had a greater gap at 90° than at full extension while the standard alignment had significantly more gap at 60° of flexion than full extension. The physiologic alignment had a significantly greater gap with the implant compared to the intact condition at both loads. The standard alignment had no significant difference in overall gap between the implant and intact condition with any load.

INTERPRETATION

Although performing a physiologic aligned TKA resulted in medial-lateral soft tissue balance, the flexion gap was found to have greater magnitude than the intact knee. Notably, a neutral aligned TKA was found to be balanced, but also was found to recreate the intact knee flexion gaps. These results suggest that coronal plane stability can be achieved with physiologic alignment objectives, but the clinician needs to be aware of the potential to have greater laxity than the intact and neutral alignment surgical objectives.

The Influence of Joint Distraction Force on the Soft-Tissue Balance Using Modified Gap-Balancing Technique in Posterior-Stabilized Total Knee Arthroplasty

BACKGROUND

During modified gap-balancing technique, there is no consensus on the best method for obtaining appropriate soft-tissue balance and determining the femoral component rotation.

METHODS

Sixty-five varus osteoarthritic patients underwent primary posterior-stabilized total knee arthroplasty using modified gap-balancing technique. The influence of joint distraction force on the soft-tissue balance measurement during the modified gap-balancing technique was evaluated with Offset Repo-Tensor between the osteotomized surfaces at extension, and between femoral posterior condyles and tibial osteotomized surface at flexion of the knee before the resection of femoral posterior condyles. The joint center gap (millimeters) and varus ligament balance (°) were measured under 20, 40, and 60 pounds of joint distraction forces, and the differences in these values at extension and flexion (the value at flexion minus the value at extension) were also calculated.

RESULTS

The differences in joint center gap (-6.7, -6.8, and -6.9 mm for 20, 40, and 60 pounds, respectively) and varus ligament balance (3.5°, 3.8°, and 3.8°) at extension and flexion were not significantly different among different joint distraction forces, although the joint center gap and varus ligament balance significantly increased stepwise at extension and flexion as the joint distraction force increased.

CONCLUSION

The difference in joint center gap and varus ligament balance at extension and flexion were consistent even among the different joint distraction forces. This novel index would be useful for the determination of femoral component rotation during the modified gap-balancing technique.

Patient-related factors influence stiffness of the soft tissue complex during intraoperative gap balancing in cruciate-retaining total knee arthroplasty

PURPOSE

How much force is needed to pre-tension the ligaments during total knee arthroplasty? The goal of this study was to determine this force for extension and flexion, and for both compartments, and to identify predicting patient-related factors.

METHODS

Eighty patients [55 females, mean age 71 (SD 9.7)] were recruited and had a navigated cruciate-retaining total knee arthroplasty. Distraction of the medial and lateral compartments of the extension and flexion gap (90°) with an instrumented bi-compartmental double-spring tensioner took place after finishing the bone cuts. Applied forces and resulting gap distances were recorded by the navigation system, resulting in a force-elongation curve. Lines were fitted with the intersection defined as the stiffness transition point. The slopes (N/mm) represented the stiffness of the ligamentous complex. Linear multiple regression analysis was performed to identify predicting factors.

RESULTS

The amount of force at the stiffness transition point was on average 52.3 (CI₉₅ 50.7-53.9), 54.5 (CI₉₅ 52.7-56.3), 48.3 (CI₉₅ 46.2-50.2), and 59.3 (CI₉₅ 57.0-61.6) N for the medial and lateral extension and flexion gap, respectively, and varied considerably between patients. The force at the stiffness transition point was significantly different between extension and flexion and both compartments (P < 0.05). Stiffness of the ligaments statistically significantly helped to predict the amount of force at the stiffness transition point, as well as body mass index, gender, and varus-valgus alignment.

CONCLUSION

The amount of force at the stiffness transition point varies between 48 and 59 N, depending on flexion/extension and compartment. Patient-related factors influence the stiffness transition point and can help predict the stiffness transition point. When forces higher than 60 N are used for gap distraction, the ligamentous sleeve of the knee might be over-tensioned.

LEVEL OF EVIDENCE

Prognostic study, Level I-high-quality prospective cohort study with >80 % follow-up, and all patients enrolled at same time point in disease.

Measurement of change on medial and lateral joint gaps by navigation system in multi-radius PS TKA

BACKGROUND

The purpose of this study was to evaluate the joint gap kinematics in posterior-stabilized total knee arthroplasty (PS TKA).

METHODS

Between January 2010 and April 2011, 44 consecutive patients (55 knees) who underwent primary PS TKA using the navigation system were assessed. There were 37 women and 7 men with a mean age at operation of 63 years (range; 58-73 years). After fixation of all components with cement and insertion of polyethylene trial insert, medial and lateral joint gap measurements were carried out without distraction force and separately using a navigation system on each flexion angles. The joint gaps were measured before and after deflation of tourniquet, first with patella everted and then reduced.

RESULTS

Deflation of tourniquet did not effect on gap. In patellofemoral joint reduction situation, the medial gap relatively maintained throughout the range of knee motion, but the lateral gap is gradually decreasing with knee flexion from 30° to 120° flexion. However, in patellar eversion situation, the medial gap showed a significant increase and also statistically significantly increased compared with patellar reduced position over 90° knee flexion status, but the lateral gaps are decreased compared with patellofemoral reduction situation throughout the range of knee motion except full flexion status. In more physiologic status that is patella reduced and tourniquet deflated status, the average medial joint gap change was 2.30 ± 1.64 mm and the average lateral joint gap change was 2.90 ± 1.53 mm throughout the range of motion.

CONCLUSIONS

Medial and lateral joint gaps showed different patterns with patellar eversion and patellofemoral joint reduction. However, such changes occurred within 3 mm in average throughout whole range of knee motion even with multi-radius femoral component.

Effects of Suture and Tourniquet on Intraoperative Kinematics in Navigated Total Knee Arthroplasty

BACKGROUND

To investigate the effects of suture (soft tissue closure) and air tourniquet use on intraoperative kinematics in navigated total knee arthroplasty.

METHODS

The study included 20 patients with varus-type knee osteoarthritis who underwent primary posterior-stabilized total knee arthroplasty using computed tomography (CT)-based navigation. Intraoperative tibiofemoral kinematics from maximum extension to maximum flexion were measured using the computed tomography-based navigation. The measurements were performed 3 times as follows: measurement 1: before suture (tourniquet on), measurement 2: after suture (tourniquet on), and measurement 3: after tourniquet removal. Details of kinematics including knee joint gap, tibiofemoral rotational angles, and anteroposterior (AP) distance between the femur and tibia were compared among the 3 measurements and statistically evaluated.

RESULTS

On the medial side, there was no significant difference among the 3 measurements in the extension gap, but measurement 1 showed a significantly larger flexion gap compared with the other 2 measurements. On the lateral side, there was no significant difference between the extension and flexion gaps in all measurements. The anteroposterior distance in measurement 1 showed that the femur was positioned significantly more anterior to the tibia at 10° and 20° of flexion compared with the other 2 measurements after suture. There was no significant difference among the 3 measurements in the tibiofemoral rotation angles.

CONCLUSION

These results found that the effect of suture and tourniquet was minimal, and that intraoperative kinematics can effectively evaluate postoperative passive kinematic conditions.

Effects of Resection of Posterior Condyles of Femur on Extension Gap of Knee Joint in Total Knee Arthroplasty

BACKGROUND

When evaluating the effects of the preparation of the flexion gap on the extension gap in total knee arthroplasty (TKA), the effects of posterior condylar resection and osteophyte removal on the extension gap should be differentiated. Although the amount of osteophytes differs between patients, posterior condylar resection is a procedure that is routinely implemented in TKA. The aim of this study was to assess the effects of the resection of the posterior condyle of the femur on the extension gap in posterior-stabilized (PS) TKA.

METHODS

We enrolled 40 knees that underwent PS TKA between July 2010 and February 2011 with no or minimal osteophytes in the posterior compartment and a varus deformity of <15°. We measured the extension gap before and after the resection of the posterior condyle of the femur using a tensor under 20 and 40 lb of distraction force.

RESULTS

Under 20 lb of distraction force, the average extension gap was 13.3 mm (standard deviation [SD], 1.6) before and 13.8 mm (SD, 1.6) after posterior condylar resection. Under 40 lb of distraction force, the average extension gap was 15.1 mm (SD, 1.5) before and 16.1 mm (SD, 1.7) after posterior condylar resection.

CONCLUSION

The resection of the posterior condyle of the femur in PS TKA increased the extension gap. However, this increase was only by approximately 1 mm. In conclusion, posterior condylar resection does increase the extension gap by approximately 1 mm. However, in most case, this change in unlikely to be clinically important.

The contribution of intraoperative medial compartment stability to post-operative knee flexion angle in unicompartmental knee arthroplasty

PURPOSE

Given the knee kinematics and soft tissue balance in unicompartmental knee arthroplasty (UKA), it was hypothesised that intraoperative medial compartment stability will result in good functional outcome. The purpose of this study was to test the influence of soft tissue balance on post-operative knee flexion in UKA.

METHODS

The influence of soft tissue balance on post-operative knee flexion in UKA was first examined retrospectively by using a newly developed tensor device in 30 consecutive patients diagnosed with either isolated medial compartmental osteoarthritis or idiopathic necrosis. The intraoperative component gap of the medial compartment was measured by using the tensor while applying a 20-lb joint distraction force at 0°, 10°, 30°, 45°, 60°, 90°, 120°, and 135° of knee flexion, with calculation of the joint looseness. Correlations between the soft tissue parameters and post-operative knee flexion angles were analysed 1 year after surgery.

RESULTS

The post-operative knee flexion angle was negatively correlated with the component gap at 45°, 60°, and 90° of flexion (R = -0.41, P < 0.05; R = -0.44, P < 0.05; and R = -0.44, P < 0.05, respectively). Furthermore, the post-operative knee flexion angle was negatively correlated with joint looseness at 45°, 60°, and 90° of flexion (R = -0.40, P < 0.05; R = -0.41, P < 0.05; and R = -0.36, P < 0.05, respectively).

CONCLUSIONS

The intraoperative medial compartment stability of knee flexion in midrange resulted in increasing post-operative knee flexion angle in UKA. Medial soft tissue release should be minimised, and assessment of soft tissue balance using a tensor can be performed to predict the post-operative knee flexion angle during surgery for UKA.

LEVEL OF EVIDENCE

III.

Effect of Soft Tissue Releases on Joint Space Opening in Total Knee Arthroplasty

BACKGROUND

The purpose of this study was to determine the gap achieved to the medial and lateral compartments following sectioning and release of the relevant soft tissues in preparation for a total knee arthroplasty.

METHODS

A custom-designed knee tensioner allowed the application of forces to the medial and lateral compartments of 12 cadaveric knee specimens. Loads of 100 N and 200 N were applied to each compartment, and the resulting displacement was measured in the following conditions: (1) All soft tissues intact, (2) an arthrotomy, (3) anterior cruciate ligament (ACL) sectioned, (4) posterior cruciate ligament (PCL) sectioned, and (5) release of the anterior aspect of the deep medial collateral ligament (MCL) fibers. Tensions were applied for all conditions from 90° to 0° of knee flexion in 30° increments.

RESULTS

No differences were found in medial or lateral displacement after the arthrotomy or releasing the ACL or PCL at either 100 N or 200 N. At the 100 N load application, there was a significant increase in gap width when the anterior portion of the deep MCL was released (7.49 mm) compared to the intact (5.28 mm) and arthrotomy (5.75 mm) conditions. With respect to the 200 N load application, there were statistically significant differences detected between the deep MCL fiber release (11.09 mm) and intact conditions (8.05 mm) and release of the deep MCL and arthrotomy conditions (8.77 mm).

CONCLUSION

The medial parapetellar arthrotomy, ACL and PCL sectioning did not result in medial or lateral displacement changes. The release of the anterior fibers of the deep MCL as part of the surgical exposure increased the medial gap magnitude.

The influence of tibial resection on the PCL in PCL-retaining total knee arthroplasty: A clinical and cadaveric study

BACKGROUND

The influence of tibial resection on the joint gap and on stability against posterior laxity in posterior cruciate ligament-retaining total knee arthroplasty (CR-TKA) remains unclear. In addition, there are no detailed reports regarding how much of the tibial attachment of the posterior cruciate ligament (PCL) is preserved during tibial resection. Our goals were to evaluate the influence of tibial resection on the intraoperative joint gap and on postoperative anteroposterior stability in a clinical population, and to assess the preserved area of the tibial PCL attachment using cadaveric knees.

METHODS

In 20 consecutive patients, the joint gaps before and after tibial resection at 90° flexion and full extension were analyzed during CR-TKA, and anteroposterior stability was evaluated postoperatively. In 11 cadaveric knees, tibial resection with a thickness of 8, 10, 12, or 14 mm and a posterior slope of 3, 4, 5, 6, or 7° was simulated using computed tomography images, and the percentage of the preserved area of the attachment was calculated.

RESULTS

The flexion gaps before and after tibial resection were 18.1 ± 1.9 mm and 18.4 ± 2.2 mm, respectively, with no statistically significant difference (p = 0.08). Similarly, the extension gap did not increase significantly before and after tibial resection (20.8 ± 2.5 mm and 21.0 ± 2.6 mm; p = 0.45). All knees maintained anteroposterior stability at the follow-up period (32.0 ± 1.9 months). The posterior slope of the tibial resection was 5.9 ± 1.4°, and the thickness of the lateral tibial resection was 10.4 ± 1.1 mm. The cutoffs to preserve more than 50% of the attachment were 10-mm thickness and 5° slope.

CONCLUSIONS

Our results showed that tibial resection did not influence the intraoperative joint gap or postoperative anteroposterior stability. However, our analysis demonstrated that increased amounts of tibial resection led to considerable damage to the attachment.

Intraoperative Manipulation for Flexion Contracture During Total Knee Arthroplasty

Joint gap balancing during total knee arthroplasty (TKA) is important for ensuring postoperative joint stability and range of motion. Although the joint gap should be balanced to ensure joint stability, it is not easy to achieve perfect balancing during TKA. In particular, relative extension gap shortening can induce flexion contracture. Intraoperative manipulation is often empirically performed. This study evaluated the tension required for this manipulation and investigated the influence of intraoperative manipulation on the joint gap in cadaveric knees. Total knee arthroplasty was performed in 6 cadaveric knees from whole body cadavers. Flexion contracture was induced using an insert that was 4 mm thicker than the extension gap, and intraoperative manipulation was performed. Study measurements included the changes in the joint gap after manipulation at 6 positions, with the knee bending from extension to 120° flexion, and the manipulation tension that was required to create a 4-mm increase in the gap. The manipulation tension needed to create a 4-mm increase in the extension gap was 303±17 N. The changes in the joint gap after manipulation were 0.4 mm, 0.6 mm, 0.2 mm, -0.2 mm, -0.4 mm, and -0.6 mm at 0°, 30°, 45°, 60°, 90°, and 120° flexion, respectively. Therefore, the joint gap was not significantly changed by the manipulation. Intraoperative manipulation does not resolve flexion contracture. Therefore, if flexion contracture occurs during TKA, treatment with additional bone cutting and soft tissue release is likely more appropriate than manipulation. [Orthopedics. 2016; 39(6):e1070-e1074.].

Alignment in knee flexion position during navigation-assisted total knee arthroplasty

PURPOSE

The aim of this study was to demonstrate the lower limb alignment in knee flexion position after navigation-assisted total knee arthroplasty using the gap technique and to identify the correlative factors.

METHODS

One hundred and twenty consecutive osteoarthritic knees (120 patients) were prospectively enrolled for intraoperative data collection. All TKA surgeries were performed using the navigation system (OrthoPilot™, version 4.0; B. Braun Aesculap, Tuttlingen, Germany). Before and after final prosthesis implantation, the lower limb navigation alignment in both knee extension (0°) and knee flexion (90°) position was recorded. The knee flexion alignment was divided into three groups: varus, neutral and valgus alignment. To determine the factors of the alignment in knee flexion position, preoperative demographics, radiologic and intraoperative data were obtained. Pearson's correlation (r) analysis was performed to find the correlation. The Knee Society Score and Western Ontario and McMaster Universities Osteoarthritis Index were compared between groups.

RESULTS

Although all postoperative extension alignment was within neutral position (between -2° and +2°), postoperative knee flexion alignment was divided into three groups: varus (≤-3°), 24 cases (20 %); neutral (between -2° and +2°), 85 cases (70.8 %) and valgus (≥+3°) alignment, 11 cases (9.2 %). There were a good correlation of alignment in knee flexion position with the rotation of femoral component relative to posterior condylar axis (r = -0.502, p = 0.000) and weak correlations with posterior femoral cut thickness (lateral condyle) (r = 0.207, p = 0.026), medial flexion (90°) gap after femoral component rotation adjustment (r = 0.276, p = 0.003). Other variables did not show correlations. There were no statistical clinical differences between varus, neutral and valgus knee flexion alignment groups.

CONCLUSION

About 30 % of the cases showed malalignment of more than 3° in knee flexion position although with neutral alignment in extension position. The knee flexion alignment had a good correlation with the rotation of femoral component relative to posterior condylar axis. Neutral alignment in knee flexion position may be adjusted by femoral component rotation especially by the use of navigation system.

LEVEL OF EVIDENCE

IV.

The influence of intraoperative soft tissue balance on patellar pressure in posterior-stabilized total knee arthroplasty

BACKGROUND

Appropriate soft tissue balance is essential for the success of total knee arthroplasty (TKA), and assessment with an offset-type tensor provides useful information about the femorotibial (FT) joint. The purpose of the study was to investigate the relationship between intraoperative soft tissue balance and patellar pressure at both medial and lateral sides.

METHODS

Thirty varus-type osteoarthritis patients who received mobile-bearing posterior-stabilized TKAs were enrolled in the study. Using the tensor, soft tissue balance, including joint component gap and varus ligament balance, was recorded at 0°, 10°, 30°, 60°, 90°, 120°, and 135° with patellofemoral (PF) joint reduction and femoral component placement. Following final prostheses implanted with appropriate insert, the medial and lateral patellar pressures were measured at each flexion angle. A simple regression analysis was performed between each patellar pressure, parameter of soft tissue balance, and postoperative flexion angle.

RESULTS

Both lateral and medial patellar pressures increased with flexion. The lateral patellar pressure was significantly higher than the medial patellar pressure at 60°, 90°, and 135° of flexion (p<0.05). The lateral patellar pressure inversely correlated with the varus ligament balance at 60° and 90° of flexion (p<0.05). The lateral patellar pressure at 120° and 135° of flexion inversely correlated with the postoperative flexion angle (p<0.05).

CONCLUSION

Soft tissue balance influenced patellar pressure. In particular, a reduced lateral patellar pressure was found at the lateral laxity at flexion, leading to high postoperative flexion angle.

LEVEL OF EVIDENCE

III.