Directional Cell Migration Guided by a Strain Gradient

Strain gradients widely exist in development and physiological activities. The directional movement of cells is essential for proper cell localization, and directional cell migration in responses to gradients of chemicals, rigidity, density, and topography of extracellular matrices have been well-established. However; it is unclear whether strain gradients imposed on cells are sufficient to drive directional cell migration. In this work, a programmable uniaxial cell stretch device is developed that creates controllable strain gradients without changing substrate stiffness or ligand distributions. It is demonstrated that over 60% of the single rat embryonic fibroblasts migrate toward the lower strain side in static and the 0.1 Hz cyclic stretch conditions at ≈4% per mm strain gradients. It is confirmed that such responses are distinct from durotaxis or haptotaxis. Focal adhesion analysis confirms higher rates of contact area and protrusion formation on the lower strain side of the cell. A 2D extended motor-clutch model is developed to demonstrate that the strain-introduced traction force determines integrin fibronectin pairs' catch-release dynamics, which drives such directional migration. Together, these results establish strain gradient as a novel cue to regulate directional cell migration and may provide new insights in development and tissue repairs.

Strain Gradient Programming in 3D Fibrous Hydrogels to Direct Graded Cell Alignment

Biological tissues experience various stretch gradients which act as mechanical signaling from the extracellular environment to cells. These mechanical stimuli are sensed by cells, triggering essential signaling cascades regulating cell migration, differentiation, and tissue remodeling. In most previous studies, a simple, uniform stretch to 2D elastic substrates has been applied to analyze the response of living cells. However, induction of nonuniform strains in controlled gradients, particularly in biomimetic 3D hydrogels, has proven challenging. In this study, 3D fibrin hydrogels of manipulated geometry are stretched by a silicone carrier to impose programmable strain gradients along different chosen axes. The resulting strain gradients are analyzed and compared to finite element simulations. Experimentally, the programmed strain gradients result in similar gradient patterns in fiber alignment within the gels. Additionally, temporal changes in the orientation of fibroblast cells embedded in the stretched fibrin gels correlate to the strain and fiber alignment gradients. The experimental and simulation data demonstrate the ability to custom-design mechanical gradients in 3D biological hydrogels and to control cell alignment patterns. It provides a new technology for mechanobiology and tissue engineering studies.

BEaTS-α an open access 3D printed device for in vitro electromechanical stimulation of human induced pluripotent stem cells

3D printing was used to develop an open access device capable of simultaneous electrical and mechanical stimulation of human induced pluripotent stem cells in 6-well plates. The device was designed using Computer-Aided Design (CAD) and 3D printed with autoclavable, FDA-approved materials. The compact design of the device and materials selection allows for its use inside cell incubators working at high humidity without the risk of overheating or corrosion. Mechanical stimulation of cells was carried out through the cyclic deflection of flexible, translucent silicone membranes by means of a vacuum-controlled, open-access device. A rhythmic stimulation cycle was programmed to create a more physiologically relevant in vitro model. This mechanical stimulation was coupled and synchronized with in situ electrical stimuli. We assessed the capabilities of our device to support cardiac myocytes derived from human induced pluripotent stem cells, confirming that cells cultured under electromechanical stimulation presented a defined/mature cardiomyocyte phenotype. This 3D printed device provides a unique high-throughput in vitro system that combines both mechanical and electrical stimulation, and as such, we foresee it finding applications in the study of any electrically responsive tissue such as muscles and nerves.

Time dependence of cellular responses to dynamic and complex strain fields

Exposing cells to an unconventional sequence of physical cues can reveal subtleties of cellular sensing and response mechanisms. We investigated the mechanoresponse of cyclically stretched fibroblasts under a spatially non-uniform strain field which was subjected to repeated changes in stretching directions over 55 h. A polydimethylsiloxane microfluidic stretcher array optimized for complex staining procedures and imaging was developed to generate biologically relevant strain and strain gradient amplitudes. We demonstrated that cells can successfully reorient themselves repeatedly, as the main cyclical stretching direction is consecutively switched between two perpendicular directions every 11 h. Importantly, from one reorientation to the next, the extent to which cells reorient themselves perpendicularly to the local strain direction progressively decreases, while their tendency to align perpendicularly to the strain gradient direction increases. We demonstrate that these results are consistent with our finding that cellular responses to strains and strain gradients occur on two distinct time scales, the latter being slower. Overall, our results reveal the absence of major irreversible cellular changes that compromise the ability to sense and reorient to changing strain directions under the conditions of this experiment. On the other hand, we show how the history of strain field dynamics can influence the cellular realignment behavior, due to the interplay of complex time-dependent responses.

Cellular orientation is guided by strain gradients

The strain-induced reorientation response of cyclically stretched cells has been well characterized in uniform strain fields. In the present study, we comprehensively analyse the behaviour of human fibroblasts subjected to a highly non-uniform strain field within a polymethylsiloxane microdevice. Our results indicate that the strain gradient amplitude and direction regulate cell reorientation through a coordinated gradient avoidance response. We provide critical evidence that strain gradient is a key physical cue that can guide cell organization. Specifically, our work suggests that cells are able to pinpoint the location under the cell of multiple physical cues and integrate this information (strain and strain gradient amplitudes and directions), resulting in a coordinated response. To gain insight into the underlying mechanosensing processes, we studied focal adhesion reorganization and the effect of modulating myosin-II contractility. The extracted focal adhesion orientation distributions are similar to those obtained for the cell bodies, and their density is increased by the presence of stretching forces. Moreover, it was found that the myosin-II activity promoter calyculin-A has little effect on the cellular response, while the inhibitor blebbistatin suppresses cell and focal adhesion alignment and reduces focal adhesion density. These results confirm that similar internal structures involved in sensing and responding to strain direction and amplitude are also key players in strain gradient mechanosensing and avoidance.

A REVIEW OF TWO-DIMENSIONAL IN VITRO CELL STRETCH PLATFORMS

The focus of this paper is to describe the mechanism and behavior of two-dimensional in vitro cell stretch platforms, as well as discussing designs for the evaluation of mechanical properties of cells. It is extremely important to understand the cellular response to extrinsic mechanical forces as living biological system is constantly subjected to mechanical forces in vivo. In addition, this mechanistic understanding of cellular response will provide valuable information towards the design and fabrication of bioengineered tissues and organs, which are expected to replace and/or aid bodily functions. This paper will primarily focus on the development, advantages and limitations of two-dimensional cell stretch platforms.

A simple multi-well stretching device to induce inflammatory responses of vascular endothelial cells

We herein introduce a novel multi-well stretching device that is made of three polydimethylsiloxane layers, consisting of a top hole-punched layer, middle thin membrane, and bottom patterned layer. It is the first time that such a simple device has been used to supply axisymmetric and nonuniform strains to cells cultured on well bottoms that are stretchable. These mechanical stimuli can somewhat mimic the stretching at the bending sites of blood vessels, where the strains are complicated. In this device, nonuniform strain is given to cells through the deformation of a membrane from a flat surface to a spherical cap during the injection of a certain volume of water into the chamber between the middle membrane and bottom layer. EA.hy926 cells (a human umbilical vein endothelial cell line) were seeded on the well bottoms and exposed to axisymmetric strain under a 5, 10, 15, and 20% degree of deformation of the membrane. The cellular responses were characterized in terms of cell morphology, cell viability, and expression of inflammatory mRNAs and proteins. With increasing the degree of deformation, the cells exhibited an inclination toward detachment and apoptosis; meanwhile the expression of inflammatory mRNAs and proteins, such as MCP-1, IL-8, IL-6 and ICAM-1, showed a significant increment. The obtained results demonstrate that the inflammatory responses of EA.hy926 cells can be induced by increasing the magnitude of the strain. This simple device provides a useful tool for in vitro investigation of the inflammatory mechanisms related to vascular diseases.

Highly Stretchable, Biocompatible, Striated Substrate Made from Fugitive Glue

We developed a novel substrate made from fugitive glue (styrenic block copolymer) that can be used to analyze the effects of large strains on biological samples. The substrate has the following attributes: (1) It is easy to make from inexpensive components; (2) It is transparent and can be used in optical microscopy; (3) It is extremely stretchable as it can be stretched up to 700% strain; (4) It can be micro-molded, for example we created micro-ridges that are 6 μm high and 13 μm wide; (5) It is adhesive to biological fibers (we tested fibrin fibers), and can be used to uniformly stretch those fibers; (6) It is non-toxic to cells (we tested human mammary epithelial cells); (7) It can tolerate various salt concentrations up to 5 M NaCl and low (pH 0) and high (pH 14) pH values. Stretching of this extraordinary stretchable substrate is relatively uniform and thus, can be used to test multiple cells or fibers in parallel under the same conditions.

Device-Based In Vitro Techniques for Mechanical Stimulation of Vascular Cells: A Review

The most common cause of death in the developed world is cardiovascular disease. For decades, this has provided a powerful motivation to study the effects of mechanical forces on vascular cells in a controlled setting, since these cells have been implicated in the development of disease. Early efforts in the 1970 s included the first use of a parallel-plate flow system to apply shear stress to endothelial cells (ECs) and the development of uniaxial substrate stretching techniques (Krueger et al., 1971, “An in Vitro Study of Flow Response by Cells,” J. Biomech., 4(1), pp. 31–36 and Meikle et al., 1979, “Rabbit Cranial Sutures in Vitro: A New Experimental Model for Studying the Response of Fibrous Joints to Mechanical Stress,” Calcif. Tissue Int., 28(2), pp. 13–144). Since then, a multitude of in vitro devices have been designed and developed for mechanical stimulation of vascular cells and tissues in an effort to better understand their response to in vivo physiologic mechanical conditions. This article reviews the functional attributes of mechanical bioreactors developed in the 21st century, including their major advantages and disadvantages. Each of these systems has been categorized in terms of their primary loading modality: fluid shear stress (FSS), substrate distention, combined distention and fluid shear, or other applied forces. The goal of this article is to provide researchers with a survey of useful methodologies that can be adapted to studies in this area, and to clarify future possibilities for improved research methods.

Computational model of matrix remodeling and entrenchment in the free-floating fibroblast-populated collagen lattice

Tissue equivalents represent excellent model systems for elucidating principles of mechanobiology and for exploring methods to improve the functionality of tissue-engineered constructs. The simplest tissue equivalent is the free-floating fibroblast-populated collagen lattice. Although introduced over 30 years ago, the associated mechanics of the cell-mediated compaction of this lattice was only recently analyzed in detail. The goal of this paper was to build on this recent stress analysis by developing a computational model of the evolving geometry, regionally varying material properties and cell stresses, and overall residual stress fields during the first two days of compaction. Baseline results were found to agree well with most experimental observations, namely evolving changes in radius, thickness, and material symmetry, yet hypothesis testing revealed aspects of the mechanobiology that require more experimental attention. Given the generality of the proposed framework, we submit that modifications and refinements can be used to study many similar systems and thereby help guide future experiments.

Primary and secondary lymphatic valve development: molecular, functional and mechanical insights

Fluid homeostasis in vertebrates critically relies on the lymphatic system forming a hierarchical network of lymphatic capillaries and collecting lymphatics, for the efficient drainage and transport of extravasated fluid back to the cardiovascular system. Blind-ended lymphatic capillaries employ specialized junctions and anchoring filaments to encourage a unidirectional flow of the interstitial fluid into the initial lymphatic vessels, whereas collecting lymphatics are responsible for the active propulsion of the lymph to the venous circulation via the combined action of lymphatic muscle cells and intraluminal valves. Here we describe recent findings on molecular and physical factors regulating the development and maturation of these two types of valves and examine their role in tissue-fluid homeostasis.

In vitro experimental study for the determination of cellular axial strain threshold and preferential axial strain from cell orientation behavior in a non-uniform deformation field

Cells within connective tissues are routinely subjected to a wide range of non-uniform mechanical loads that regulate many cell behaviors. In the present study, the relationship between cell orientation angle and strain value of the membrane was comprehensively investigated using an inhomogeneous strain field. Additionally, the cellular axial strain threshold, which corresponds to the launching of cell reorientation response, was elucidated. Human bone marrow mesenchymal stem cells were used for these experiments. In this study, an inhomogeneous strain distribution was easily created by removing one side holes of an elastic chamber in a commonly used uniaxial stretching device. The strains of 2D stretched membranes were quantified on a position-by-position basis using the digital image correlation method. The normal strain in the direction of stretch was changed continuously from 2.0 to 15.0%. A 3D histogram of the cell frequency, which was correlated with the cell orientation angle and normal strain of the membrane, made it possible to determine the axial strain threshold accurately. The value of the axial strain threshold was 4.4 ± 0.3%, which was reasonable compared with previous studies based on cyclic uniaxial stretch stimulation (homogeneous strain field). Additionally, preferential axial strain of cells, which was a cell property firstly introduced, was also achieved and the value was -2.0 ± 0.1%. This study is novel in three respects: (i) it precisely and easily determined the axial strain threshold of cells; (ii) it is the first to suggest preferential axial strain of cells; and (iii) it methodically investigated cell behavior in an inhomogeneous strain field.

Mechanosensing in developing lymphatic vessels

The lymphatic vasculature is responsible for fluid homeostasis, transport of immune cells, inflammatory molecules, and dietary lipids. It is composed of a network of lymphatic capillaries that drain into collecting lymphatic vessels and ultimately bring fluid back to the blood circulation. Lymphatic endothelial cells (LECs) that line lymphatic capillaries present loose overlapping intercellular junctions and anchoring filaments that support fluid drainage. When interstitial fluid accumulates within tissues, the extracellular matrix (ECM) swells and pulls the anchoring filaments. This results in opening of the LEC junctions and permits interstitial fluid uptake. The absorbed fluid is then transported within collecting lymphatic vessels, which exhibit intraluminal valves that prevent lymph backflow and smooth muscle cells that sequentially contract to propel lymph.Mechanotransduction involves translation of mechanical stimuli into biological responses. LECs have been shown to sense and respond to changes in ECM stiffness, fluid pressure-induced cell stretch, and fluid flow-induced shear stress. How these signals influence LEC function and lymphatic vessel growth can be investigated by using different mechanotransduction assays in vitro and to some extent in vivo.In this chapter, we will focus on the mechanical forces that regulate lymphatic vessel expansion during embryonic development and possibly secondary lymphedema. In mouse embryos, it has been recently shown that the amount of interstitial fluid determines the extent of lymphatic vessel expansion via a mechanosensory complex formed by β1 integrin and vascular endothelial growth factor receptor-3 (VEGFR3). This model might as well apply to secondary lymphedema.

Altered phenotypic gene expression of 10T1/2 mesenchymal cells in nonuniformly stretched PEGDA hydrogels

Disease-related phenotype modulation of many cell types has been shown to be closely related to mechanical loading conditions; for example, vascular smooth muscle cell (SMC) phenotype shift from a mature, contractile state to a proliferative, synthetic state contributes to the formation of neointimal tissue during atherosclerosis and restenosis development and is related to SMC mechanical loading in vivo. The majority of past in vitro cell-stretching experiments have employed simplistic (uniform, uniaxial or biaxial) stretching environments to elucidate mechanobiological pathways involved in phenotypic shifts. However, the in vivo mechanics of the vascular wall consists of highly nonuniform stretch. Here we subjected 10T1/2 murine mesenchymal cells (an SMC precursor) to two- and three-dimensional nonuniform stretch environments. After 24 h of stretch, cells on an elastomeric membrane demonstrated varied proliferation [assessed by 5-bromo-2'-deoxyuridine (BrdU) incorporation] depending on location upon the membrane, with maximal proliferation occurring in a region of high, uniaxial stretch. Cells subjected to a nonuniform stretching regimen within three-dimensional polyethylene glycol diacrylate (PEGDA) hydrogel constructs demonstrated marked changes in mRNA expression of several phenotype-related proteins, indicating a sort of "hybrid" phenotype with contractile and synthetic markers being both upregulated and downregulated. Furthermore, expression levels of mRNAs were significantly different between various locations within the stretched gel. With the proliferation results, these data exhibit the capability of nonuniform stretching devices to induce heterogeneous cell responses, potentially indicative of spatial distributions of disease-related behaviors in vivo.